Pregled po znanstvenom području: Strojarstvo (MB: 2.11)

1876.

Marinić-Kragić, Ivo; Milas, Zoran; Vučina, Damir

Numerical workflow for 3d shape optimization and synthesis of vertical-axis wind turbines for specified operating regimes // European Wind Energy Association 2015 Proceedings
Pariz, 2015. (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada proceedings.ewea.org www.ewea.org

1877.

Pavić, Zlatko; Raguž, Ivan

From beginning to modern engineering // Proceedings of 7th International Scientific and Expert Conference of the International TEAM Society / Sedmak, Aleksandar ; Radakovic, Zoran ; Sedmak, Simon ; Kirin, Snezana (ur.).
Beograd: Faculty of Mechanical Engineering, University of Belgrade, 2015. str. 266-269 (ostalo, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

teamconference2015.com teamconference2015.com

1878.

Berković-Šubić, Mihaela; Boras, Ivanka; Frančeski, Joško; Kodvanj, Janoš; Rodić, Alan; Švaić, Srećko; Tonković, Zdenko

Application of IR Thermography for Determination of Material Properties // QIRT Conference Open Archives / Venkatraman B. (ur.).
Seven Pagodas, Indija, 2015. str. 1-12 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

qirt.org

1879.

Vidaković, Držislav; Bubalo, Tomislav

Metode pogodne za vremensko planiranje aktivnosti održavanja // Zbornik radova Održavanje 2015 / Čala, Ivo (ur.).
Zagreb: Hrvatsko društvo održavatelja - HDO, Zagreb, 2015. str. 20-30 (predavanje, domaća recenzija, cjeloviti rad (in extenso), znanstveni)

1880.

Munjas, Neven; Čanađija, Marko; Brnić, Josip

Thermo-mechanical multiscale modeling in plasticity of metals // Proceedings of the 8th International Congress of Croatian Society of Mechanics / Kožar, Ivica ; Bićanić, Nenad ; Jelenić, Gordan ; Čanađija, Marko (ur.).
Opatija, 2015. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1881.

Brčić, Marino; Čanađija, Marko; Brnić, Josip

Influence of Imperfections on Mechanical Properties of Carbon Nanotube Reinforced Polymer Matrix Nanocomposites // Proceedings of the 8th International Congress of Croatian Society of Mechanics / Kožar, Ivica ; Bićanić, Nenad ; Jelenić, Gordan ; Čanađija, Marko (ur.).
Opatija, Hrvatska, 2015. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1882.

Popovac; M; Reichl, C.; Jasak, H; Rusche, H

RANS turbulence treatment for continuous adjoint optimization // Turbulence, Heat and Mass Transfer 8
Sarajevo, Bosna i Hercegovina, 2015. (predavanje, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada www.thmt-15.org

1883.

Žigulić, Roberto; Fragassa, Cristiano; Skoblar, Ante

A nonlinear vibration model of the woodworking bandsaw // Proceedings of the 8. International Congress of Croatian Society of Mechanics / Kožar, Ivica ; Bićanić, Nenad ; Jelenić, Gordan ; Čanađija, Marko (ur.).
Opatija: Hrvatsko društvo za mehaniku (HDM), 2015. str. 1-12 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1884.

Ropuš, Ivana; Carcia, Gianluca; Giorcelli, Mauro; Tagliaferro, Alberto; Haramina, Tatjana; Ćurković, Lidija

Mechanical Properties of Epoxy/Multi-Walled Carbon Nanotubes Composites // 26th DAAAM International Symposium on Intelligent Manufacturing and Automation, DAAAM 2015 / B. Katalinic (ur.).
Beč: DAAAM International,, 2015. str. 940-947 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1885.

Pamuković, Frane; Golemović, Mirna; Novoselac, Jurjana; Golubić Čepulić, Branka; Zlopaša, Gordan; Kodvanj, Janoš

Experimental Measurement of Mechanical Properties of Human Umbilical Vein // Proceedings of the 24th Congress of the European Association of Tissue Banks / Kaminski, A. (ur.).
Split, 2015. str. 102-102 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1886.

Smoljan, Božo; Iljkić, Dario; Salopek, Goran

Prediction of Load Capacity of Quenched and Tempered Steel Specimen // Proceedings of the International Conference on Advances in Materials and Processing Technologies, AMPT 2015
Madrid, Španjolska, 2015. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1887.

Smoljan, Božo; Iljkić, Dario; Tomašić, Neven

Prediction of Mechanical Properties and Microstructure Composition of Quenched and Tempered Steel // Proceedings of the 28th ASM Heat Treating Society Conference “Heat Treat 2015”
Detroit (MI), Sjedinjene Američke Države: ASM International, 2015. str. 266-273 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1888.

Dominković, Dominik Franjo; Bačeković, Ivan; Ćosić, Boris; Krajačić, Goran; Pukšec, Tomislav; Duić, Neven; Markovska, Natasa

Low Carbon Energy Supply for South East Europe // Digital Proceedings of the 10th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES / Ban, Marko .... [et al.] (ur.).
Zagreb, 2015. str. 1192-1 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1889.

Peko, Ivan; Bajić, Dražen; Veža, Ivica

Selection of additive manufacturing process using the AHP method // Conference Proceedings "International conference “Mechanical Technologies and Structural Materials” 2015. / Jozić, Sonja ; Lela, Branimir (ur.).
Split: CROATIAN SOCIETY FOR MECHANICAL TECHNOLOGIES, 2015. str. 119-129 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

1890.

Raos, Pero; Stojšić, Josip; Šercer, Mladen; Pilipović, Ana

EFFECTS OF COMPOUNDING CONDITIONS ON FLEXURAL PROPERTIES OF POLYAMIDE 12/CLAY NANOCOMPOSITES // Proceedings of International Conference on Innovative Technologies (IN-TECH 2015) / Car, Zlatan ; Kudlaček, Jan (ur.).
Rijeka: Tehnički fakultet Sveučilišta u Rijeci, 2015. str. 154-157 (pozvano predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1891.

Balić, Dražen; Maljković, Danica; Lončar, Dražen

District heating system as a dynamical energy storage – opportunities and limitations // Digital Proceedings of 10th Conference on Sustainable Development of Energy, Water and Environment Systems – SDEWES Conference / Ban, Marko ; et al. (ur.). (ur.).
Zagreb: Fakultet strojarstva i brodogradnje Sveučilišta u Zagrebu, 2015. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1892.

Mikulandrić, Robert; Lončar Dražen; Böhning, Dorith; Böhme Rene; Beckmann Michael.

Dynamic modelling of biomass gasification processes in fixed bed gasifiers // Proceedings of the 10th Conference on Sustainable Development of Energy, Water and Environment Systems
Dubrovnik, Hrvatska, 2015. (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1893.

Baškarić, Tomislav; Ivandić, Željko; Kozak, Dražan; Šumanovac, Antun

Mechanical testing of fetal membranes // Proceedings of Second International Conference Modern methods of testing and evaluation in science / Petronić, Sanja ; Bojković, Nataša (ur.).
Beograd: Scientific association for development and affirmation of new technologies, 2015. str. 54-57 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1894.

Andreu, Javier Felipe; Schneider, Daniel Rolph; Krajačić, Goran

Evaluation of integration of solar energy into the district heating system of the City of Velika Gorica // Digital Proceedings of the 10th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES / Ban, Marko .... [et al.] (ur.).
Zagreb: International Centre for Sustainable Development of Energy, Water and Environment Systems – SDEWES Centre, 2015. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1895.

Vrandečić, Tin; Horina, Alen; Schneider, Daniel Rolph

Stirling Engine CCHP Plant Fueled by Biomass and Biogas from Biowaste and Waste Water Treatment // Digital Proceedings of the 10th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES / Ban, Marko .... [et al.] (ur.).
Zagreb: International Centre for Sustainable Development of Energy, Water and Environment Systems – SDEWES Centre, 2015. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1896.

Matak, Nikola; Krajačić, Goran; Pilato, Ana Marija

Joint Sustainable energy action plan for municipalities of the Korcula island according to the option 2 of the Covenant of Mayors // Digital Proceedings of the 10th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES / Ban, Marko et. al. (ur.).
Zagreb, 2015. str. 1-13 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1897.

Barbarić, Marina; Lončar, Dražen

Strategies for micro-grid operation in grid- connected mode // Proceedings of the 10th Conference on Sustainable Development of Energy, Water and Environment Systems
Dubrovnik, Hrvatska, 2015. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1898.

Damjanović, Darko; Kozak, Dražan; Gubeljak, Nenad; Ivandić, Željko

Estimation of hoop residual stress in the hot-rolled tubes // Proceedings of Second International Conference Modern methods of testing and evaluation in science / Petronić, Sanja ; Bojković, Nataša (ur.).
Beograd: Scientific association for development and affirmation of new technologies, 2015. str. 69-75 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1899.

Igrec, Bojan; Bosiljevac, Marko; Rudan, Smiljko; Šipuš, Zvonimir; Babić, Dubravko

Fiber-optic vibration sensor for high-power electric machines // MIPRO 2015 Proceedings
Rijeka: Hrvatska udruga za informacijsku i komunikacijsku tehnologiju, elektroniku i mikroelektroniku - MIPRO, 2015. str. 79-82 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1900.

Cajner, Franjo; Landek, Darko; Kovačić, Saša

Introduction and application of new tehnologies of plasma nitriding and PACVD coating // The Proceedings of the 5th International Conference „Mechanical Technologies and Structural Materials
Split, Hrvatska, 2015. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1901.

Kovačić, Saša; Cajner, Franjo; Landek, Darko

Wear resistance of TiN/TiCN and TiN/TiBN multilayer coatings applied on hot work tool steel // Engineering Materials and Tribology / Hussainova, Irina ; Veinthal, Renno (ur.).
Talin, Estonija, 2015. str. 257-262 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1902.

Šimunović, Jakov; Bagarić, Danijel; Goleš, Nikolina; Bezmalinović, Dario; Radica, Gojmir; Barbir, Frano;

Hour by Hour Simulation of Solar Hydrogen Energy System in Conjunction with Renewable Energy Sources // 5th EUROPEAN PEFC AND H2 FORUM 2015 / Barbir, Frano ; Esposito, Angelo ; Hissel, Daniel ; Radica, Gojmir ; Scholta, Joachim ; Tolj, Ivan (ur.).
Lausanne: European Fuel Cell Forum AG, 2015. str. Chapter 12 page 31-37 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

www.efcf.com

1903.

Pivac, Ivan; Šimić, Boris; Bezmalinović, Dario; Barbir, Frano

Inductance at Low Frequencies in Electrochemical Impedance Spectroscopy of PEM Fuel Cells // 5th European PEFC & H2 Forum 2015 / Barbir, Frano ; Esposito, Angelo ; Hissel, Daniel ; Radica, Gojmir ; Scholta, Joachim ; Tolj, Ivan (ur.).
Lausanne: European Fuel Cell Forum AG, 2015. str. 54-59 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

www.efcf.com

1904.

Vukčević, Vuko; Jasak, Hrvoje

Seakeeping Validation and Verification Using Decomposition Model Based on Embedded Free Surface Method // Tokyo 2015 A Workshop on CFD in Ship Hydrodynamics Proceedings, Volume III / Larsson, Lars ; Stern, Frederick ; Visonneau, Michel ; Hirata, Nobuyuki ; Hino, Takanori ; Kim, Jin (ur.).
Tokyo: National Maritime Research Institute, 2015. str. 437-442 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

1905.

Gatin, Inno; Jasak, Hrvoje; Vukčević, Vuko

Validation and Verification of Steady Resistance KCS Simulations with Sinkage and Trim using Embedded Free Surface Method // Tokyo 2015 A Workshop on CFD in Ship Hydrodynamics Proceedings, Volume III / Larsson, Lars ; Stern, Frederick ; Visonneau, Michel ; Hirata, Nobuyuki ; Hino, Takanori ; Kim, Jin (ur.).
Tokyo: National Maritime Research Institute, 2015. str. 431-436 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

1906.

Vukčević, Vuko; Jasak, Hrvoje; Malenica, Šime

Assessment of Higher–Order Forces on a Vertical Cylinder with Decomposition Model Based on SWENSE Method // Proceedings of the 18th Numerical Towing Tank Symposium / Bertram, Volker ; Campana, Emilio F. (ur.).
Cortona: TuTech, 2015. str. 201-206 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

1907.

Gatin, Inno; Vukčević, Vuko; Jasak, Hrvoje

CFD Validation of a Container Ship in Calm Water and Head Seas // Proceedings of the 18th Numerical Towing Tank Symposium / Bertram, Volker ; Campana, Emilio F. (ur.).
Cortona: TuTech, 2015. str. 53-58 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

1908.

Ančić, Ivica; Šestan, Ante; Vladimir, Nikola

Modification of the EEDI for Ro-Ro passenger ships // Proceedings of the World Maritime Technology Conference 2015 (SNAME Maritime Convention)
Providence (RI): Society of Naval Architects and Marine Engineers (SNAME), 2015. str. 1-8 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

1909.

Kolić, Damir; Storch, Richard Lee; Fafandjel, Nikša

Optimizing Shipyard Interim Product Assembly Using a Value Stream Mapping Methodology // Ship Production Symposium 2015 SNAME Papers / SNAME (ur.).
Providence (RI): SNAME, 2015. str. 1-10 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada http

1910.

Kolić, Damir; Yao, Y. Lawrence; Neuberg, Richard; Storch, Richard Lee; Fafandjel, Nikša

Data Mining to Predict Hybrid Laser Arc Welding Improvements in Ship Interim Product Assembly // International Conference on Computer Applications in Shipbuilding 2015 Papers Volume 3 / The Royal Institution of Naval Architects (ur.).
London : Delhi: The Royal Institution of Naval Architects, 2015. str. 137-144 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

1911.

Boutanios, Ziad; Jasak, Hrvoje

Viscous treatment of the snow phase in Eulerian-Eulerian simulations of drifting snow // The 14th International Conference on Wind Engineering
Porto Alegre, Brazil, 2015. (predavanje, cjeloviti rad (in extenso), znanstveni)

1912.

Nižetić, Sandro; Goleš, Nikolina

Impacts that are contributing to a gap between designed and achieved energy savings in buildings. // 46th International congress&exibition on heating, refrigeration and air conditioning
Beograd: SMEITS, 2015. str. 421-426 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1913.

Škugor, Branimir; Deur, Joško

Analysis of Techno-Economic Aspects of an Energy System Including Delivery Electric Vehicle Fleet and Renewable Energy Sources // 10th CONFERENCE ON SUSTAINABLE DEVELOPMENT OF ENERGY, WATER AND ENVIRONMENT SYSTEMS (SDEWES)
Dubrovnik, Hrvatska, 2015. (poster, cjeloviti rad (in extenso), znanstveni)

1914.

Škugor, Branimir; Deur, Joško

Bi-level Optimisation Framework for Electric Vehicle Fleet Charging // 10th CONFERENCE ON SUSTAINABLE DEVELOPMENT OF ENERGY, WATER AND ENVIRONMENT SYSTEMS (SDEWES)
Dubrovnik, Hrvatska, 2015. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1915.

Škugor, Branimir; Deur, Joško

A Nonlinear Charge-based Model of Electric Vehicle Fleet Aggregate Battery // European Battery, Hybrid and Fuel Cell Electric Vehicle Congress (EEVC)
Bruxelles, Belgija, 2015. (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1916.

Marušić, Ante; Lončar, Dražen; Batelić, Jakov; Franković, Valdi

Increasing flexibility of coal power plant by control system modifications // Proceedings of the 10th Conference on Sustainable Development of Energy, Water and Environment Systems
Dubrovnik, Hrvatska, 2015. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1917.

Grgec Bermanec, Lovorka; Čalušić, Luka

Interlaboratory Comparison of Pressure Gauges Calibration in the range from 0 to 140 MPa for Croatian Accredited Laboratories // Laboratory Competence 2015 / Grgec Bermanec, Lovorka (ur.).
Zagreb: CROLAB - Hrvatski laboratoriji, 2015. str. 40-49 (poster, domaća recenzija, cjeloviti rad (in extenso), znanstveni)

1918.

Novosel, Tomislav; Pukšec, Tomislav; Krajačić, Goran; Duić, Neven

Role of district heating in systems with a high share of renewables: Case study for the city of Osijek // Abstract book of the International Scientific Conference CONECT 2015 / Blumberga, Dagnija ; et.all (ur.).
Riga: Institute of Energy Systems and Environment, Riga Technical University, 2015. str. 14-14 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1919.

Virag, Lana; Vindiš, Vedran; Sorić, Jurica; Karšaj, Igor

Implementation of Thrombus-laden Abdominal Aortic Aneurysms into Finite Element Code // Proceedings of the 8th International Congress of Croatian Society of Mechanics / Kožar, Ivica ; Bićanić, Nenad ; Jelenić, Gordan ; Čanađija, Marko (ur.).
Rijeka: -, 2015. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1920.

Kolar, Davor; Lisjak, Dragutin; Tošić, Marina

Application of data mining techniques in small- series job shop // Proceedings of 5th International Conference Production Engineering and Management 2015 / Padoano, Elio ; Villmer, Franz-Josef (ur.).
Trst: Publication Series in Logistics, 2015. str. 367-378 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1921.

Braut, Sanjin; Žigulić, Roberto; Štimac-Rončević, Goranka; Skoblar, Ante

Diagnosis of partial rotor–stator rubbing using Variational Mode Decomposition // 14th IFToMM World Congress / Shuo Hung Chang (ur.).
Taipei: International Federation for the Promotion of Mechanism and Machine Science, 2015. str. 1-6 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1922.

Fragassa, Cristiano; Žigulić, Roberto; Braut, Sanjin

Effect of Design Parameters in Circular Saw Blades // 8th International Congress of Croatian Society of Mechanics / Kožar, Ivica ; Bićanić, Nenad ; Jelenić, Gordan ; Čanađija, Marko (ur.).
Opatija: Hrvatsko društvo za mehaniku (HDM), 2015. str. 1-13 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1923.

Anđelić, Nikola; Pavlović, Ana; Braut, Sanjin

Variation of Natural Frequencies by Circular Saw Blade Rotation // 8th International Congress of Croatian Society of Mechanics / Kožar, Ivica ; Bićanić, Nenad Jelenić, Gordan ; Čanađija, Marko (ur.).
Opatija: Hrvatsko društvo za mehaniku (HDM), 2015. str. 1-14 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1924.

Petranović, Zvonimirć; Edelbauer, Wilfried; Vujanović, Milan; Duić, Neven

CFD modelling of Diesel spray and combustion using homogenous gas phase reactions within the Euler-Eulerian framework // Proceedings of the European Combustion Meeting – 2015
Budimpešta, Mađarska, 2015. (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1925.

Hreha, Pavol; Hloch, Sergej; Kozak, Dražan; Krolczyk, Jolanta; Stojkov, Marinko; Samardžić, Ivan; Stoić, Antun; Ivandić, Željko; Krolczyk, Grzegorz

Advanced closed-loop quality on-line control model for simulation of abrasive water jet cutting using vibration // Development in Machining Technology, VOL.5, Chapter 3, pages: 27-41, / Zebala, Wojciech ; Mankova, Ildiko (ur.).
Krakov: Cracow University of Technology, 2015. str. 27-41 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1926.

Hornung, Krunoslav; Stojkov, Marinko; Hnatko, Emil; Hornung, Maja

Kako saznajemo i koliko znamo o energiji, prirodnom plinu i obnovljivim izvorima energije? // Zbornik radova , Proceedings, 13. skup o prirodnom plinu , toplini i vodi, 13th Natural Gas, Heat and Water Conference, 6. međunarodni skup o prirodnom plinu, toplini i vodi, 6th International Natural Gas, Heat and Water Conference - PLIN 2015 / Raos, Pero ; Galeta, Tomislav ; Kozak, Dražan ; Raos, Marija ; Stojšić, Josip ; Tonković, Zlatko (ur.).
Osijek: Strojarski fakultet Sveučilišta u Slavonskom Brodu, 2015. str. 220-228 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

konferencija-plin.sfsb.hr

1927.

Bošnjak, Mihael; Stojkov, Marinko; Šljivac, Damir; Topić, Danijel; Čikić, Ante; Pelin, Denis

Mala hidroelektrana (mHE) „Pleternica“ // Proceedings of the 13 th NATURAL GAS, HEAT AND WATER CONFERENCE ; 6 th INTERNATIONAL NATURAL GAS, HEAT AND WATER CONFERENCE - PLIN 2015 / Raos, Pero ; Galeta, Tomislav ; Kozak, Dražan ; Raos, Marija ; Stojšić, Josip ; Tonković, Zlatko (ur.).
Osijek: Strojarski fakultet Sveučilišta u Slavonskom Brodu, 2015. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1928.

Raos, Pero; Stojšić, Josip

Influence of injection molding parameters on injection molded part weight // Proceedings of TEAM 2015 / Aleksandar Sedmak (ur.).
Beograd: Faculty of Mechanical Engineering, University of Belgrade, 2015. str. 528-530 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1929.

Škrlec, Krunoslav; Hlebec Ivkanec, Ivan

Procesno upravljanje bioplinskim sustavom s ciljem optimizacije poljoprivredne proizvodnje // 16. međunarodni simpozij o kvaliteti / Miroslav Drljača (ur.).
Zagreb: Hrvatsko društvo menadžera kvalitete, 2015. str. 119-128 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1930.

Todić, Rajko; Bartulović, Ante; Novak, Ivan; Marfat, Tomislav

DEVELOPMENT OF AN ADAPTIVE MACHINING SYSTEM FOR MICRO-DRILLING // Proceedings of the CIM 2015-15th International Scientific Conference on Production Engineering / Abele, Eberhard ; Udiljak, Toma ; Ciglar, Damir (ur.).
Zagreb: Hrvatska udruga proizvodnog strojarstva (HUPS), 2015. str. 235-238 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

1931.

Šavar, Mario; Wolf, Hinko; Sutlović, Igor

Rehabilitacija cjevovodnih sustava // Proceedings of 13th Natural Gas, Heat and Water Conference/6th International Natural Gas, Heat and Water Conference / Raos, Pero ; Galeta, Tomislav ; Kozak, Dražan ; Raos, Marija ; Stojšić, Josip ; Tonković, Zlatko (ur.).
Slavonski Brod: Strojarski fakultet Sveučilišta u Slavonskom Brodu, 2015. str. 33-40 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1932.

Pospišil, Stanislav; Buljac, Andrija; Kuznetsov, Sergey; Kozmar, Hrvoje

Influence of vehicles on bridge flutter and galloping // Proceedings of Symposium on Progress in Wind Engineering and Structural Dynamics
New Taipei City, Tajvan, 2015. (pozvano predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1933.

Tomić, Tihomir; Ćosić, Boris; Schneider, Daniel Rolph

Economic viability of biomass and MSW-fuelled district heating system: case of the city of Zagreb // Digital Proceedings of the 10th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES / Ban, Marko .... [et al.] (ur.).
Zagreb: International Centre for Sustainable Development of Energy, Water and Environment Systems – SDEWES Centre, 2015. str. 1-18 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1934.

Boldyryev, Stanislav; Krajačić Goran

Energy efficiency and carbon footprint reduction for Croatian regions by Total Site integration // Proceedings of 23rd International Symposium on Heating, Refrigerating and Air Conditioning - Interklima 2015
Zagreb: Fakultet strojarstva i brodogradnje Sveučilišta u Zagrebu, 2015. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1935.

Boldyryev, Stanislav; Ćosić, Boris; Krajačić, Goran; Dominković, Dominic, F.; Štefanec, Kristjan; Duic, Neven

Pollution reduction in Croatian food industry via Total Site heat recovery // Proceedings of 4th International Conference on Sustainability Science and Engineering / Cabezas, Heriberto (ur.).
Balatonfüred, Mađarska, 2015. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1936.

Boldyryev, Stanislav; Krajačić Goran

Targeting of Trade-Off for Total Site Heat Recovery // Digital Proceedings of the 10th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES / Ban, Marko et al. (ur.).
Zagreb: Fakultet strojarstva i brodogradnje Sveučilišta u Zagrebu, 2015. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1937.

Barkaoui, Alae-Eddine; Boldyryev, Stanislav; Duić, Neven; Krajačić, Goran; Guzović Zvonimir

Appropriate Integration of Geothermal Energy Sources by Pinch Approach: Case Study of Croatia // Digital Proceedings of the 10th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES / Ban, Marko et al. (ur.).
Zagreb: Fakultet strojarstva i brodogradnje Sveučilišta u Zagrebu, 2015. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1938.

Novosel, Tomislav; Ban, Marko; Duić, Neven; Markovska, Nataša; Borozan, Vesna; Pukšec, Tomislav; Tomić, Tihomir; Krajačić, Goran

Influence of district heating on future energy systems: Case study for the heat demand mapping and energy planning of the City of Osijek // Proceedings of 17th Symposium on Thermal Science and Engineering of Serbia
Niš: University of Niš, Faculty of Mechanical Engineering in Niš, 2015. str. 444-451 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1939.

Boldyryev, Stanislav; Krajačić, Goran; Duić, Neven; Novosel, Tomislav

Contributing global CO2 mitigation by utilisation of food industry heat into smart Croatian DHS via Total Site heat recovery // Book of abstracts: International Conference on Smart Energy Systems and 4th Generation District Heating / Lund, Henrik ; Mathiesen, Brian Vad (ur.).
Kopenhagen: Vester Kopi, 2015. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1940.

Wang, Yibin, Wang, Xuebin; Tan, Houzhang; Du, Wenzhi; Mikulčić, Hrvoje; Duić, Neven

The investigation on characterization of available salts extracted from three kinds of biomass ashes // Digital Proceedings of the 10th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES / Ban, Marko et al. (ur.).
Dubrovnik, Hrvatska, 2015. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1941.

Hu, Zhongfa; Wang, Xuebin; Luo, Xiaotao; Tan, Houzhang; Mikulčić, Hrvoje; Vujanović, Milan

Particulate Matter and Gas Pollutant Emissions of Biomass Co-firing: an Experimental Study in Drop Tube Furnace // Digital Proceedings of the 10th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES / Ban, Marko et al. (ur.).
Dubrovnik, Hrvatska, 2015. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1942.

Perković, Luka; Priesching, Peter; Bogensperger, Michael; Mikulčić, Hrvoje

Large Eddy Simulation of Turbulent Premixed Combustion of Laboratory-Scaled Flames // Digital Proceedings of the 10th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES / Ban, Marko et al. (ur.).
Dubrovnik, Hrvatska, 2015. (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1943.

Mikulčić, Hrvoje; Vujanović, Milan; Wang, Xuebin; Tan, Houzhang; Duić, Neven

Modelling Wooden Biomass Combustion in an Vertical Experimental Furnace // Digital Proceedings of the 10th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES / Ban, Marko et al. (ur.).
Dubrovnik, Hrvatska, 2015. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1944.

Boldyryev, Stanislav; Mikulčić, Hrvoje; Mohorović, Zoran; Vujanović, Milan; Krajačić, Goran

Heat Recovery and CHP Approach for Site of Cement Plant // Digital Proceedings of the 10th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES / Ban, Marko et al. (ur.).
Zagreb: Fakultet strojarstva i brodogradnje Sveučilišta u Zagrebu, 2015. (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1945.

Mikulčić, Hrvoje; von Berg, Eberhard; Vujanović, Milan; Duić, Neven

CFD modelling of biomass combustion in an experimental drop tube furnace // Digital Proceedings of the Clean Air 2015 Conference
Lisabon, Portugal, 2015. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1946.

Tumara, Dražen; Sutlović, Igor; Raos, Pero

Metodologija izračuna emisije ugljikovog dioksida // Proceedings of 13th Natural Gas, Heat and Water Conference/6th International Natural Gas, Heat and Water Conference / Raos, Pero ; Galeta, Tomislav ; Kozak, Dražan ; Raos, Marija ; Stojšić, Josip ; Tonković, Zlatko (ur.).
Slavonski Brod: Strojarski fakultet Sveučilišta u Slavonskom Brodu, 2015. str. 108-117 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1947.

Đukić, Goran; Opetuk, Tihomir; Cajner, Hrvoje; Lerher, Tone; Jelic, Ana

Routing of VNA man-up turret trucks and vertical order-pickers // XIII. INTERNATIONAL LOGISTICS & SUPPLY CHAIN CONGRESS PROCEEDINGS / SANILLI, Ulviyye ; TANYAŞ, Mehmet ; KESKİN Hakan (ur.).
Izmir: Izmir University & LODER, 2015. str. 168-177 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1948.

Lerher, Tone; potrč, Iztok; Kramberger, Tomaž; Rosi, Bojan; Đukić, Goran

LEAN AND GREEN @ INTRALOGISTICS - CASE STUDY: SBS/RS VERSUS AS/RS // XIII. INTERNATIONAL LOGISTICS & SUPPLY CHAIN CONGRESS 2015 PROCEEDINGS / SANILLI, Ulviyye ; TANYAŞ, Mehmet ; KESKİN Hakan (ur.).
Izmir: Izmir University & LODER, 2015. str. 135-144 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1949.

Komušanac, Ivan; Ćosić, Boris; Perković, Luka; Duić, Neven

Experience with solar-driven LiBr/H2O absorption cooling system in Vodovod Dubrovnik d.o.o. // Proceedings of the 12th International Conference on Accomplishment in Electrical and Mechanical Engineering and Information Technology / Jovišević, Vid (ur.).
Banja Luka: University of Banja Luka, Faculty of Mechanical Engineering, 2015. str. 385-390 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1950.

Novosel, Tomislav; Dedinec Aleksandar; Ćosić, Boris; Markovska, Nataša; Pukšec, Tomislav; Krajačić, Goran; Duić, Neven

Role of district heating in energy systems with a high share of renewables – A case study for the country of Macedonia // Digital Proceedings of the 10th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES / Ban, Marko .... [et al.] (ur.). - (ur.).
Dubrovnik, Hrvatska, 2015. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1951.

Pfeifer, Antun; Dominković, Dominik Franjo; Ćosić, Boris

Economic potential of biomass from unused agriculture land for energy use: case of Croatia // Digital Proceedings of the 10th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES / Ban, Marko .... [et al.] (ur.).
Zagreb, 2015. str. 0399-1 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1952.

Ćosić, Boris; Dominković, Dominik Franjo; Ban, Marko; Perković, Luka

Location optimization for biomass trigeneration system with pit thermal energy storage: the case of the city of Petrinja // Digital Proceedings of the 10th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES / Ban, Marko .... [et al.] (ur.).
Zagreb, 2015. str. 1189-1 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1953.

Komušanac, Ivan; Ćosić, Boris

Impact of wind and photovoltaic power plants installation share on the country power system load: case of Croatia // Digital Proceedings of the 10th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES / Ban, Marko .... [et al.] (ur.).
Dubrovnik, Hrvatska, 2015. str. 0405-1 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1954.

Pavlic, Tomislav; Miletić, Marko; Hršak, Božidar; Badrov, Tatjana; Golubić, Stjepan; Vaško, Tajana; Šegrt, Ivana; Jolić, Robert; Aleksić, Dejan

Animation Design in the Process of Developing a New Mechatronic Product // Proceedings of TEAM 2015 7th International Scientific and Expert Conference of the International TEAM Society / Aleksandar Sedmak, Zoran Radakovic, Simon Sedmak, Snezana Kirin (ur.).
Beograd: Faculty of Mechanical Engineering, University of Belgrade, 2015. str. 332-335 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1955.

Pavlic, Tomislav; Golubić, Stjepan; Čikić, Ante; Radočaj, Danijel

Simulacija zavarivanja pomoću ABB robotske ruke u programskom alatu RobotStudio // 8. MEĐUNARODNO ZNANSTVENO-STRUČNO SAVJETOVANJE SBZ 2015 - PROJEKTIRANJE, IZRADA I ODRŽAVANJE ZAVARENIH KONSTRUKCIJA I PROIZVODA
Slavonski Brod, Hrvatska, 2015. str. 1-7 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1956.

Kovačić, Maja; Cvitanić, Vedrana

An analysis of evolutionary anisotropic constitutive model based on Karafillis-Boyce stress function // Proceedings of 5th International Conference Mechanical Technologies and Structural Materials 2015 / Jozić, Sonja ; Lela, Branimir (ur.).
Split: Croatian Society of Mechanical Technologies, 2015. str. 73-83 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1957.

Cvitanić, Vedrana; Kovačić, Maja

Algorithmic formulation for evolutionary anisotropic plasticity model for sheet metals // Proceedings of the 8th International Congress of Croatian Society of Mechanics / Kožar, Ivica ; Bićanić, Nenad ; Jelenić, Gordan ; Čanađija, Marko (ur.).
Opatija: Hrvatsko društvo za mehaniku (HDM), 2015. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1958.

Sertić, Josip; Kozak, Dražan; Šimunić, Damir; Samardžić, Ivan; Gelo, Ivan; Bučević-Keran, Dino

Influence of welded Joint Structure on Fatigue Strength of the Impact Loaded Weld Fillet Joint between Radial Carrier and Rapping Device Drive Shaft // Proceedings of the 3rd International Conference Mechanical Engineering in XXI Century / Nikolić, Vlastimir ; Milčić, Dragan (ur.).
Niš: Faculty of Mechanical Engineering, 2015. str. 199-204 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

www2.masfak.ni.ac.rs

1959.

Radočaj, Danijel; Jurica, Maja; Kos, Sebastijan; Pavlic, Tomislav

Programiranje industrijskih robota za potrebe robotiziranog zavarivanja // Projektiranje, izrada i održavanje zavarenih konstrukcija i proizvoda, SBZ 2015 / Samardžić, Ivan ; Despotović, Božo (ur.).
Slavonski Brod: Strojarski fakultet Sveučilišta u Slavonskom Brodu, 2015. str. 238-249 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1960.

Šestan, Danijel; Jugović, Antun

Evaluation of calibration bath with two precision thermometers // Knjiga radova jedanaeste CROLAB-ove konferencije KOMPETENTNOST LABORATORIJA 2015 / Lovorka Grgec Bermanec (ur.).
Zagreb: CROLAB - Hrvatski laboratoriji, 2015. str. 10-15 (poster, domaća recenzija, cjeloviti rad (in extenso), znanstveni)

1961.

Milovančević, Miloš; Karanikić, Petra; Tijan, Edvard

Techno-economical optimization of vibro-diagnostic method for rotation machines // International Conference on Innovative Technologies IN-TECH 2015 Proceedings / Car, Zlatan ; Kudláček, Jan (ur.).
Rijeka: University of Rijeka, Faculty of Engineering, 2015. str. 217-220 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1962.

Grizelj, Branko; Duspara, Lena; Skorin, Vesna; Grizelj, Vlasta; Grizelj, Nikola

MICROFORMING FRICTION IN METAL FORMING // 8. INTERNATIONAL SCIENTIFIC-PROFESSIONAL CONFERENCE SBZ 2015 DESING, PRODUCTION AND SERVICE OF WELDED CONSTRUCTIONS AND PRODUCTS, SBS 2015 / Samardžić, Ivan and Despotović, Božo (ur.).
Slavonski Brod, 2015. str. 62-69 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1963.

Juretić, Hrvoje; Smoljanić, Goran; Ahac, Igor

Removal of natural organic matter from surface waters by enhanced coagulation // Laboratory Competence 2015 / Grgec Bermanec, Lovorka (ur.).
Zagreb: CROLAB - Hrvatski laboratoriji, 2015. str. 16-23 (poster, domaća recenzija, cjeloviti rad (in extenso), znanstveni)

1964.

Pezer, Danijela

THE IMPORTANCE OF SOFT SKILLS IN TECHNICAL EDUCATION // Proceedings of TEAM 2015 / prof. Sedmak, Aleksandar (ur.).
Beograd: Faculty of Mechanical Engineering, University of Belgrade, 2015. str. 75-79 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1965.

Runje, Biserka; Horvatić, Amalija; Stepanić, Josip; Mihaljević, Morana

Predložena revizija Vodiča za iskazivanje mjerne nesigurnosti // Laboratory Competence 2015
Zadar, 2015. (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1966.

Lujić, Roberto; Nikolić, Ivan; Jukić, Josip; Šarić, Tomislav; Šimunović, Goran; Šimunović, Katica; Galzina, Vjekoslav; Svalina, Ilija

Application of Kaizen method through implementation of visual system for production control // Proceedings of the 12th International Scientific Conference MMA 2015 "Flexible Technologies" / Doroslovački, R. at al. (ur.).
Novi Sad: Faculty of Technical Sciences, Department of Production Engineering, Novi Sad, Serbia, 2015. str. 75-78 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1967.

Antić, Aco; Šarić, Tomislav; Milošević, Miodrag

A MODULE FOR FEATURE EXTRACTION WITHIN THE NEURO- FUZZY SYSTEM FOR TOOL WEAR RECOGNITION // 12th INTERNATIONAL SCIENTIFIC CONFERENCE MMA 2015 - FLEXIBLE TECHNOLOGIES / Doroslovački, Rade (ur.).
Novi Sad: Faculty of Technical Sciences - Departmant of Production Engineering, 2015. str. 63-66 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1968.

Đukić, Ankica; Güttler, Ivan; Pašičko, Robert

Forecasting future impact of hydrogen powered vehicles on power system development in Croatia // Proceedings of the 10th Conference on Sustainable Development of Energy, Water and Environment Systems, SDEWES2015.785
Dubrovnik, Hrvatska, 2015. (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1969.

Firak, Mihajlo; Đukić, Ankica

Hydrogen transportation fuel in Croatia: Road map strategy // Proceedings of the 10th Conference on Sustainable Development of Energy, Water and Environment Systems, SDEWES2015.539
Dubrovnik, Hrvatska, 2015. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1970.

Garašić, Ivica; Kožuh, Zoran; Jurica, Maja; Tomić, Tanja; Čolić, Luka; Babić, Nikola

Optimizacija sastava aktivacijskog premaza za A – TIG navarivanje // Projektiranje, izrada i održavanje zavarenih konstrukcija i proizvoda, SBZ 2015 / Ivan Samardžić, Božo Despotović (ur.).
Slavonski Brod: Strojarski fakultet Sveučilišta u Slavonskom Brodu, 2015. str. 55-61 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1971.

Jurica, Maja; Garašić, Ivica; Kožuh, Zoran

Usporedba konvencionalnog i CBT načina prijenosa metala u području prijelaznog luka // PROJEKTIRANJE, IZRADA I ODRŽAVANJE ZAVARENIH KONSTRUKCIJA I PROIZVODA, SBZ 2015. / Ivan Samardžić, Božo Despotović (ur.).
Slavonski Brod: Strojarski fakultet Sveučilišta u Slavonskom Brodu, 2015. str. 103-111 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1972.

Pezer, Danijela; Šarić, Tomislav; Šimunović, Katica; Svalina, Ilija; Šimunović, Goran; Lujić, Roberto

KORIŠTENJE EAM SUSTAVA U OKVIRU AKTIVNOSTI KOREKTIVNOG ODRŽAVANJA POSTUPKOM PLINSKOG NAŠTRCAVANJA // 8. MEĐUNARODNO ZNANSTVENO-STRUČNO SAVJETOVANJE SBZ 2015 „PROJEKTIRANJE, IZRADA I ODRŽAVANJE ZAVARENIH KONSTRUKCIJA I PROIZVODA, SBZ 2015.“ / Samardžić, Ivan ; Despotović, Božo (ur.).
Slavonski Brod: Strojarski fakultet Sveučilišta u Slavonskom Brodu, 2015. str. 221-229 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1973.

Havrlišan, Sara; Šimunović, Katica; Šarić, Tomislav; Šimunović, Goran; Pezer, Danijela; Svalina, Ilija; Majdančić, Ivan

APPLICATION OF AHP AND ADDITIVE METHOD IN SUPPLIER SELECTION // Proceedings of TEAM 2015 / Sedmak, Aleksandar ; Kirin, Snežana ; Radaković, Zoran ; Sedmak, Simon (ur.).
Beograd: Faculty of Mechanical Engineering, University of Belgrade, 2015. str. 149-153 (ostalo, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1974.

Vukelić, Goran; Brnić, Josip

Mechanical Properties Determination and Crack Behavior Prediction for Steels 1.4057 and 1.7225 // Proceedings of the 8th International Congress of Croatian Society of Mechanics / Kožar, Ivica ; Bićanić, Nenad ; Jelenić, Gordan ; Čanađija, Marko (ur.).
Opatija: Hrvatsko društvo za mehaniku (HDM), 2015. str. 106-107 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1975.

Troha, Sanjin; Karaivanov; Dimitar; Džindo, Emina

Two-Speed Two-Carrier Planetary Gear Trains // Proceedings of TEAM 2015 / Sedmak, Aleksandar ; Radakovic, Zoran ; Sedmak, Simon ; Kirin, Snežana (ur.).
Beograd: Faculty of Mechanical Engineering, University of Belgrade, 2015. str. 538-542 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1976.

Štefek, Zdenko; Karakašić, Mirko; Ivandić, Željko; Kljajin, Milan

CONCEPT DESIGN FOR MACHINE TO CUT RAW RUBBER TO RIBBONS // Proceedings of TEAM 2015 - 7th International Scientific and Expert Conference of the International TEAM Society / prof. Aleksandar Sedmak (ur.).
Beograd: Faculty of Mechanical Engineering, University of Belgrade, 2015. str. 59-63 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1977.

Klarić, Štefanija; Pavić, Zlatko; Hadžiahmetović, Halima

Analysis of ductile iron metallographic images gained by laboratory and on-site metallography methods // Proceedings of 7th International Scientific and Expert Conference of the International TEAM Society / Sedmak, Aleksandar ; Radakovic, Zoran ; Sedmak, Simon ; Kirin, Snezana (ur.).
Beograd: Faculty of Mechanical Engineering, University of Belgrade, 2015. str. 64-68 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

teamconference2015.com

1978.

Pecić, Vladimir; Klarić, Štefanija

The influence of quenching/cooling media on hardness and microstructure of ductile iron // Proceedings of TEAM 2015, 7th International Scientific and Expert Conference of the International TEAM Society / Sedmak, Aleksandar (ur.).
Beograd: Faculty of Mechanical Engineering, University of Belgrade, 2015. str. 28-31 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1979.

Balković, Mislav; Kozak, Dražan; Silvija, Grgić

Use of learning outcomes in assessment – new perspective brought by National Qualifications Frameworks and current practices in engineering higher education in Croatia // Proceedings of 7th International Scientific and Expert Conference of the International TEAM Society (TEAM 2015) / Sedmak, Aleksandar (ur.).
Beograd: Faculty of Mechanical Engineering, University of Belgrade, 2015. str. 509-513 (pozvano predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1980.

Kotšmíd, Stanislav; Beňo, Pavel; Kozak, Dražan; Królczyk, Grzegorz

METHODOLOGY FOR THE COMPUTATION OF CRITICAL BUCKLING FORCE AT STEEL TUBES WITH FLATTENED ENDS // Proceedings of TEAM 2015 - 7th International Scientific and Expert Conference of the International TEAM Society / prof. Aleksandar Sedmak (ur.).
Beograd: Faculty of Mechanical Engineering, University of Belgrade, 2015. str. 107-109 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1981.

Konjatić, Pejo; Kapetan, Josip; Karakašić, Mirko; Kozak, Dražan; Ivandić, Željko

STRESS AND DEFORMATION ANALYSIS OF STRUCTURAL MEMBERS OF ONE MULTIPURPOSE KIOSK // Proceedings of TEAM 2015 - 7th International Scientific and Expert Conference of the International TEAM Society / prof. Aleksandar Sedmak (ur.).
Beograd: Faculty of Mechanical Engineering, University of Belgrade, 2015. str. 364-368 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1982.

Morvaj, Tomislav; Karakašić, Mirko; Konjatić, Pejo; Ivandić, Željko; Kozak, Dražan

DESIGN AND EVALUATION OF ROOF STRUCTURES AND FOUNDATION SYSTEMS FOR THE TECHNICAL SYSTEM KIOSK // Proceedings of TEAM 2015 - 7th International Scientific and Expert Conference of the International TEAM Society / prof. Aleksandar Sedmak (ur.).
Beograd: Faculty of Mechanical Engineering, University of Belgrade, 2015. str. 55-58 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1983.

Butumović, Domagoj; Karakašić, Mirko; Konjatić, Pejo; Ivandić, Željko; Kozak, Dražan

DEVELOPMENT OF ENERGY SUSTAINABLE CONCEPTUAL VARIANT OF THE TECHNICAL SYSTEM KIOSK // Proceedings of TEAM 2015 - 7th International Scientific and Expert Conference of the International TEAM Society / prof. Aleksandar Sedmak (ur.).
Beograd: Faculty of Mechanical Engineering, University of Belgrade, 2015. str. 49-54 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1984.

Dubreta, Nikša; Miloš, Damir

The Structure of Motivation for Mechanical Engineering Study at University of Zagreb // Proceedings of TEAM 2015 7th International Scientific and Expert Conference of the International TEAM Society / Sedmak, Aleksandar ; Kirin, Snežana ; Radaković, Zoran ; Sedmak, Simon (ur.).
Beograd: Faculty of Technology and Metallurgy, Research and Development Centre of Printing Technology, 2015. str. 131-137 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1985.

Sedmak, Aleksandar; Petrovski, Blagoj; Gubeljak, Nenad; Legat, Janko; Samardžić, Ivan; Kozak, Dražan; Kuzmanović, Siniša; Adžiev, Todor; Adžiev, Gjorgji; Ćulafić, Vuk et al.

Weldment Fracture Mechanics // Proceedings of the 3rd IIW South-East European Welding Congress / Murariu, Alin Constantin (ur.).
Temišvar: Editura Politehnica, 2015. str. 1-12 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

www.seeiiw2015.com

1986.

Živković, Dražen; Gabrić, Igor; Dadić, Zvonimir; Čatipović, Nikša; Vrljičak, Ivan

ANALIZA UTJECAJA PARAMETARA IZOTERMIČKE OBRADE NA SVOJSTVA ŽILAVOG LIJEVA EN-GJS-400 // MECHANICAL TECHNOLOGIES AND STRUCTURAL MATERIELS 2015 / Sonja, Jozić ; Branimir, Lela (ur.).
Split: HRVATSKO DRUŠTVO ZA STROJARSKE TEHNOLGIJE, 2015. str. 181-188 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1987.

Čatipović, Nikša; Živković, Dražen; Dadić, Zvonimir; Sučić, Ante; Ljumović, Petar

Utjecaj izotermičke temperature i vremena držanja na mikrostrukturu i tvrdoću izotermičkog žilavog lijeva // Mechanical Technologies and Structural Materials 2015 / Sonja, Jozić ; Branimir, Lela (ur.).
Split: Hrvatsko društvo za strojarske tehnologije, 2015. str. 23-33 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1988.

Skozrit, Ivica; Tonković, Zdenko; Krstulović- Opara, Lovre; Surjak, Martin; Vesenjak, Matej; Čanžar, Predrag; Sorić, Jurica

Damage Initiation and Evolution in Nodular Cast Iron for Wind Turbine Components // Proceedings of the 8th International Congress of Croatian Society of Mechanics / Kožar, Ivica ; Bićanić, Nenad ; Jelenić, Gordan ; Čanađija, Marko (ur.).
Opatija: Hrvatsko društvo za mehaniku (HDM), 2015. str. 91-91 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1989.

Marušić, Vlatko; Šimunović, Goran; Šarić, Tomislav; Šakić, Dejan

ERP APPLICATION FOR REDUCTION OF SCRAP WHILE CASTING ALUMINUM ALLOY // 5th International Conference "Economics and Management-Based on New Technologies" EMoNT 2015 / Predrag V. Dašić (ur.).
Vrnjačka Banja: SaTCIP (Scientific and Technical Center for Intellectual Property) Ltd, 2015. str. 19-28 (pozvano predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1990.

Lesičar, Tomislav; Tonković, Zdenko; Sorić, Jurica

C1 Microlevel Second-Order Computational Homogenization // Proceedings of the 8th International Congress of Croatian Society of Mechanics / Kožar, Ivica ; Bićanić, Nenad ; Jelenić, Gordan ; Čanađija, Marko (ur.).
Zagreb: Hrvatsko društvo za mehaniku (HDM), 2015. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1991.

Pivac, Ivan; Magazinović, Gojko

Numerical analysis of tank heating coil heat transfer process // Towards Green Marine Technology and Transport / Guedes Soares, Carlos ; Dejhalla, Roko ; Pavletić, Duško (ur.).
London : Delhi: Taylor & Francis, 2015. str. 603-608 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

www.crcpress.com

1992.

Pavazza, Radoslav; Vlak, Frane; Vukasović, Marko; Šojat, Antonio

On the application of single Fourier series in the analysis of thin-walled beams // Proceedings of the 8th International Congress of Croatian Society of Mechanics / Kožar, Ivica ; Bićanić, Nenad ; Jelenić, Gordan ; Čanađija, Marko (ur.).
Zagreb: Grafika Helvetika, 2015. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1993.

HLOCH, S.; KĽOC, J.; FOLDYNA, J.; PUDE, F.; SMOLKO, I.; ZELEŇÁK, M.; SITEK, L.; HVIZDOŠ, P.; MONKA, P.; MONKOVÁ, K. et al.

Preliminary study using pulsating water jet for bone cement demolition // Proceedings of the Conference on Water Jet Technology Water Jet 2015 - Research, Development, Applications / Klichova, Dagmar ; Sitek, Libor (ur.).
Ostrava: Ustav geoniky AV ČR, v.v.i, 2015. str. 37-54 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

www.ugn.cas.cz

1994.

Gašparović, Goran; Prebeg, Pero; Krajačić, Goran

Application of Multi-objective Optimization to a Long-term Design of Croatian National Energy System // Proceedings of The 10th Conference on Sustainable Development of Energy, Water and Environment Systems in SDEWES Conference, Dubrovnik 2015
Zagreb, 2015. (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1995.

Pfeifer, Antun; Gašparović, Goran; Krajačić, Goran

Integration of transport and renewable energy sectors in 100% renewable islands communities – Case study Lastovo // Proceedings of The 10th Conference on Sustainable Development of Energy, Water and Environment Systems in SDEWES Conference, Dubrovnik 2015 / Ban, Marko et al. (ur.).
Zagreb: Fakultet strojarstva i brodogradnje Sveučilišta u Zagrebu, 2015. 0359-1, 11 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

www.dubrovnik2015.sdewes.org

1996.

Gašparović, Goran; Kilkis, Siir; Krajačić, Goran

Sustainability Comparison of Campus and Community Microgrids through SDEWES Index and H2RES // Proceedings of The 10th Conference on Sustainable Development of Energy, Water and Environment Systems in SDEWES Conference, Dubrovnik 2015
Zagreb, 2015. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1997.

Konjatić, Pejo; Konjatić, Ana; Šakić, Filip

PARAMETRIC ANALYSIS FOR DETERMINATION OF FRACTURE MECHANICS PARAMETERS NEEDED FOR STRUCTURAL INTEGRITY ASSESSMENT OF PRESSURE VESSEL // RIM 2015 – Development and Modernization of Production / Hodžić, Damir (ur.).
Bihać: Grafičar Bihać, 2015. str. 89-94 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1998.

Jalušić, Boris; Jarak, Tomislav; Sorić, Jurica

On the Optimization of Shape Parameters in the Local Radial Point Interpolation Collocation Method for Modeling of Heterogeneous Materials // Proceedings of the 8th International Congress of Croatian Society of Mechanics / Kožar, Ivica ; Bićanić, Nenad ; Jelenić, Gordan ; Čanađija, Marko (ur.).
Zagreb: Hrvatsko društvo za mehaniku (HDM), 2015. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

1999.

Smoljan, Božo; Iljkić, Dario; Štic, Lovro; Rubeša, Domagoj

Matematičko modeliranje i računalna simulacija tvrdoće nakon poboljšanja // Proceedings of the 5th International conference on Mechanical Technologies and Structural Materials 2015
Split, Hrvatska, 2015. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

2000.

Rujnić-Sokele, Maja; Šercer, Mladen

Biodegradable Plastics – Challenges and Opportunities // 10th Conference on Sustainable Development of Energy, Water and Environment Systems / Ban, Marko et al. (ur.).
Zagreb: Fakultet strojarstva i brodogradnje Sveučilišta u Zagrebu, 2015. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

2001.

Krstulović-Opara, Lovre; Vesenjak, Matej; Duarte, Isabel; Ren, Zoran; Domazet, Željko

Infrared thermography as a method for energy absorbtion evaluation of metal foams // Proceeding of 32nd Danubia-Adria Symposium on Advances in Experimental Mechanics / O. Bokuvka (ur.).
Žilina: Žilinska univerzita v Žiline, 2015. str. 104-105 (pozvano predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

2002.

Dragičević, Mario; Jozić, Sonja; Bajić, Dražen

Optimization of cutting parameters in end-milling of 42CrMo4 steel by applying Taguchi method and the Grey relational analysis // MECHANICAL TECHNOLOGIES AND STRUCTURAL MATERIALS / Jozić, Sonja ; Lela, Branimir (ur.).
Split: Croatian society for mechanical technologies, 2015. str. 41-46 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

2003.

Veić, Mario; Jozić, Sonja; Celent, Luka

Cost estimation of milling production process based on a modular machining in software package CATIA V5 // MECHANICAL TECHNOLOGIES AND STRUCTURAL MATERIALS / Jozić, Sonja ; Lela, Branimir (ur.).
Split: Croatian society for mechanical technologies, 2015. str. 167-173 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

2004.

Vujanović, Milan; Petranović, Zvonimir

Modelling the spray and combustion processes in diesel engine using coupled Euler-Eulerian and Euler-Lagrangian approach // Digital Proceedings of 10th Conference on Sustainable Development of Energy, Water and Environment Systems, 2015 / Ban, Marko, et al. (ur.).
Zagreb, 2015. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

2005.

Wang, Jin; Vujanović, Milan; Baleta, Jakov; Duić, Neven; Guzović, Zvonimir

Effects of surface deposition and droplet injection on film cooling // Digital Proceedings of the 10th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES / Ban, Marko .... [et al.] (ur.).
Dubrovnik, Hrvatska, 2015. str. 0283-1 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

2006.

Baleta, Jakov; Mikulčić, Hrvoje; Vujanović, Milan

Numerical simulation of urea based selective non-catalytic reduction deNOx process for industrial applications // Digital Proceedings of the 10th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES / Ban, Marko .... [et al.] (ur.).
Dubrovnik, Hrvatska, 2015. str. 0110-1 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

2007.

Sjerić, Momir; Kozarac, Darko; Tomić, Rudolf; Taritaš, Ivan; Blažić, Mislav

Modelling the multi cylinder SI engine performance using cycle-simulation model // Digital Proceedings of the 10th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES / Ban, Marko et al. (ur.)
Dubrovnik, Hrvatska, 2015. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

2008.

Tošić, Marina; Lisjak, Dragutin; Kolar, Davor

Impact of the key performance indicators on a maintenance process: a literature overview // Proceedings of 5th International Conference Production Engineering and Management 2015 / Padoano, Elio ; Villmer, Franz-Josef (ur.).
Trst: Publication Series in Logistics, 2015. str. 353-365 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

2009.

Kotšmid, Stanislav; Beno, Pavel; Kozak, Dražan

Effect of a Tube Flattening on the Value of Critical Buckling Force // 8th International Congress of Croatian Society of Mechanics / Ivica Kožar, Nenad Bićanić Gordan Jelenić, Marko Čanađija (ur.).
Opatija: Hrvatsko društvo za mehaniku (HDM), 2015. str. 46-46 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

2010.

Gubeljak, Nenad; Likeb, Andrej; Matvienko, Yury G.; Rakin, Marko; Međo, Bojan; Damjanović, Darko; Kozak, Dražan

Fracture Behavior of New Pipe – Ring Specimens for Fracture Toughness Testing of Thin – Wall Pipeline // 8th International Congress of Croatian Society of Mechanics / Ivica Kožar, Nenad Bićanić Gordan Jelenić, Marko Čanađija (ur.).
Opatija: Hrvatsko društvo za mehaniku (HDM), 2015. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

2011.

Sedlar, Damir; Lozina, Željan; Tomac, Ivan

Optimization of truss structures using basic variable neighborhood search // Proceedings of the 8th International Congress of Croatian Society of Mechanics
Opatija, Hrvatska, 2015. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

2012.

Lototskyy, Mykhaylo; Tolj, Ivan; Davids, M. Wafeeq; Parsons, Adrian; Klochko, Yevgeniy; Swanepoel, Dana; Smith, Fahmida; Pollet, G. Bruno; Sita, Cordellia; Linkov, Vladimir

Metal Hydride Hydrogen Storage and Supply Systems for Electric Forklift with LT PEMFC Power Module // 10th SDEWES Conference Dubrovnik 2015
Dubrovnik, 2015. str. 0441-1 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

2013.

Šimunović, Goran; Šarić, Tomislav; Šimunović, Katica; Lujić, Roberto; Svalina, Neven; Havrlišan, Sara

Predictive models for surface roughness of face milled S235JRG2 structural steel // ZBORNIK RADOVA/CONFERENCE PROCEEDINGS STROJARSKE TEHNOLOGIJE I KONSTRUKCIJSKI MATERIJALI/MECHANICAL TECHNOLOGIES AND STRUCTURAL MATERIALS / Jozić, Sonja ; Lela, Branimir (ur.).
Split: Hrvatsko društvo za strojarske tehnologije, 2015. str. 145-154 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

2014.

Živić, Marija; Stojkov, Marinko; Bukvić, Dalibor

Analiza energetske učinkovitosti centraliziranog sustava za proizvodnju i distribuciju toplinske energije // Zbornik radova PLIN 2015 / Raos, Pero ; Galeta, Tomislav ; Kozak, Dražan ; Raos, Marija ; Stojšić, Josip ; Tonković, Zlatko (ur.).
Osijek: Strojarski fakultet Sveučilišta u Slavonskom Brodu, 2015. str. 11-20 (pozvano predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

2015.

Lela, Branimir; Krolo, Jure; Dragičević, Mario

SOLID-STATE RECYCLING OF EN AW 2011 ALUMINIUM CHIPS // Proceedings of 5th International Conference Mechanical Technologies and Structural Materials 2015 / Jozić, Sonja ; Lela, Branimir (ur.).
Split: Croatian society for mechanical technologies, 2015. str. 101-106 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

2016.

Ančić, Ivica; Šestan, Ante; Vladimir, Nikola

Influence of the required EEDI reduction factor application on general cargo ships GHG emissions // Proceedings of the 16th International Congress of the International Maritime Association of the Mediterranean IMAM 2015 – Towards Green Marine Technology and Transport / Guedes Soares, C. ; Dejhalla, R. ; Pavletić, D. (ur.).
London : Delhi: Taylor & Francis, 2015. str. 777-782 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

2017.

Grizelj, Branko; Grizelj, Dejan

Trenje kod metala mikrooblikovanjem Friction in metal microforming // PLIN 2015 ; 13. SKUP O PRIRODNOM PLINU, TOPLINI I VODI ; 6. MEĐUNARODNI SKUP O PRIRODNOM PLINU, TOPLINI I VODI / Raus, Pero ; Galeta, Tomislav ; Kozak, Dražan ; Raos, Marija ; Stojšić, Josip ; Tonković, Zlatko (ur.).
Osijek: Strojarski fakultet Sveučilišta u Slavonskom Brodu, 2015. str. 203-2011 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

2018.

Stojčević, Marinko; Kozak, Dražan

Postrojenje za kontinuiranu preradu otpadnog motornog ulja u dizelsko gorivo // Zbornik radova 13. skupa o prirodnom plinu, toplini i vodi te 6. međunarodnog skupa o prirodnom plinu, toplini i vodi / RAOS, Pero ; GALETA, Tomislav ; KOZAK, Dražan ; RAOS, Marija ; STOJŠIĆ Josip, TONKOVIĆ, Zlatko (ur.).
Slavonski Brod: Strojarski fakultet Sveučilišta u Slavonskom Brodu, 2015. str. 21-32 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

www.konferencija-plin.com

2019.

Putar, Filip; Lesičar, Tomislav; Sorić, Jurica; Tonković, Zdenko

Damage modeling using higher-order finite element formulation // Proceedings of the 8th International Congress of Croatian Society of Mechanics / Kožar, Ivica ; Bićanić , Nenad ; Jelenić, Gordan ; Čanađija, Marko (ur.).
Rijeka: Hrvatsko društvo za mehaniku (HDM), 2015. str. 1-13 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada www.csm.hr

2020.

Svalina, Ilija; Šimunović, Goran; Šimunović, Katica; Šarić, Tomislav; Lujić, Roberto; Pezer, Danijela; Havrlišan, Sara

Usporedba aproksimacija raznih regresijskih modela pri prognoziranju potrošnje prirodnog plina // Proceedings PLIN2015 / Raos, Pero ; Galeta, Tomislav ; Kozak, Dražan ; Raos, Marija ; Stojšić, Josip ; Tonković, Zlatko (ur.).
Osijek: Strojarski fakultet Sveučilišta u Slavonskom Brodu, 2015. str. 229-238 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

2021.

Šitum, Željko; Trslić, Petar; Trivić, Denis; Štahan, Valentino; Brezak, Hrvoje; Sremić, Dominik

Pneumatic muscle actuators within robotic and mechatronic systems // Proceedings of International Conference Fluid Power, Fluidna tehnika 2015, 17th-18th September 2015, Congress centre Habakuk, Maribor, Slovenia / Lovrec, Darko ; Tič, Vito (ur.).
Maribor: Faculty of Mechanical Engineering, 2015. str. 175-188 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada ft.fs.uni-mb.si

2022.

Lovrin, Neven

Some Ethical Issues in Engineering Design // 13th International Conference on Advanced Engineering, Computer Aided Design and Manufacturing CADAM 2015 Proceedings / Obsieger, Boris (ur.).
Rijeka: Redak, 2015. str. 9-12 (pozvano predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

2023.

Vrcan, Željko; Lovrin, Neven

Improvement of Belt Conveyor Capacity by Material Cross Section Optimisation // 13th International Conference on Advanced Engineering, Computer Aided Design and Manufacturing CADAM 2015 Proceedings / Obsieger, Boris (ur.).
Rijeka: Redak, 2015. str. 67-70 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

2024.

Tomac, Ivan; Lozina Željan; Sedlar Damir

Strategy for Identification of Damping Ratio using Morlet Wave Damping Identification Method // Proceedings of ICoEV 2015 International Conference on Engineering Vibration / Boltežar, Miha ; Slavič, Janko ; Wiercigroch, Marian (ur.).
Ljubljana: National and University Library of Slovenia, 2015. str. 359-372 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

review.icoev.org review.icoev.org

2025.

Bojčetić, Nenad; Salopek, Damir; Marjanović, Dorian

PLM IMPLEMENTATION: CASE STUDY // Proceedings of the 20th International Conference on Engineering Design (ICED 2015) / Weber, Christian ; Husung, Stephan ; Cascini, Gaetano ; Cantamessa, Marco ; Marjanovic, Dorian ; Boregoni, Monica ; Graziosi, Serena ; Montagna, Francesca ; Rotini, Federico ; Venkataraman, Srinivasan (ur.).
Milano: The Design Society, 2015. str. Vol. 10 page 61-71 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

2026.

Pavković, Danijel; Komljenović, Ante; Hrgetić, Mario; Petrić, Joško; Smetko, Viktor

Design of EKF-based SoC Estimator for an Ultracapacitor Module // Proceedings of IEEE EUROCON 2015 (16th International Conference on Computer as a Tool) / Haase, Jan ; Kakarountas, Athanasios ; Graña, Manuel ; Fraile-Ardanuy, Jesús ; Debono, Carl James ; Quintián, Héctor ; Corchado, Emilio (ur.).
Salamanca: IEEE Press, 2015. str. 403-408 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

ieeexplore.ieee.org

2027.

Pavković, Danijel; Komljenović, Ante; Hrgetić, Mario; Krznar, Matija

Experimental Characterization and Development of a SoC/SoH Estimator for a LiFePO4 Battery Cell // Proceedings of IEEE EUROCON 2015 (16th International Conference on Computer as a Tool) / Haase, Jan ; Kakarountas, Athanasios ; Graña, Manuel ; Fraile-Ardanuy, Jesús ; Debono, Carl James ; Quintián, Héctor ; Corchado, Emilio (ur.).
Salamanca: IEEE Press, 2015. str. 397-402 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

ieeexplore.ieee.org

2028.

Boban, Luka; Lepoša, Leon; Soldo, Vladimir; Grozdek, Marino

Influence of Groundwater Flow on Implementation of Distributed Thermal Response Test // Proceedings of the International Congress of Refrigeration
Yokohama, 2015. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

2029.

Glažar, Vladimir; Trp, Anica; Lenić, Kristian; Franković, Bernard

Multivariate Optimization of a Heat Exchanger with Microchannel Coil // 24th IIR International Congress of Refrigeration (ICR 2015) - Improving Quality of Life, Preserving the Earth
Yokohama: International Institute of Refrigeration (IIF/IIR ), 2015. (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

2030.

Katić , Marko; Šimunović , Vedran; Baršić , Gorana; Mudronja , Vedran

CALIBRATION OF LINE SCALES AT HMI/FSB-LPMD // 15. International scientific conference on production engineering CIM 2015 / Eberhard, Abele ; Toma, Udiljak ; Damir, Ciglar (ur.).
Vodice, Hrvatska, 2015. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

2031.

Markučič, Damir; Katić, Marko

COMPARISON OF X-RAY VISION SYSTEMS // 15. International scientific conference on production engineering / Eberhard, Abele ; Toma, Udiljak ; Damir, Ciglar (ur.).
Vodice, Hrvatska, 2015. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

2032.

Sekulić, Milenko; Pejić, Vlastimir; Spaić, Obrad; Gostimirović, Marin; Jurković, Zoran

OPTIMIZATION OF MACHINING PARAMETERS IN BALL-END MILLING USING TAGUCHI METHOD // 19th International Research/Expert Conference / Ekinović, S., Vivancos, J., Yalcin, S, (ur.).
Zenica: Faculty of Mechanical Engineering, Escola Tecnica Superior D'Enginyeria Industrial de Barcelona, Bahçeşehir University Istanbul, 2015. str. 17-20 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

www.tmt.unze.ba

2033.

Šimunović, Vedran; Baršić, Gorana; Katić, Marko; Mudronja, Vedran

Measurement of parallel thread gauges in HMI/FSB-LPMD // 15. International scientific conference on production engineering COMPUTER INTEGRATED MANUFACTURING AND HIGH SPEED MACHINING CIM 2015
Vodice, Hrvatska, 2015. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

2034.

Baršić, Gorana; Mudronja, Vedran; Katić, Marko; Šimunović, Vedran

Use of statistical tolerances // 15. International scientific conference on production engineering COMPUTER INTEGRATED MANUFACTURING AND HIGH SPEED MACHINING CIM 2015. Vodice, Croatia, 2015
Vodice, Hrvatska, 2015. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

2035.

Midžić, Ida; Štorga, Mario; Marjanović, Dorian

Eco-evaluation of Technical Systems in the Conceptual Phase // Proceedings of the 20th International Conference on Engineering Design (ICED15), Vol. 5: Design Methods and Tools – part 1
Milano, 2015. str. 299-308 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

2036.

Celent, Luka; Bajić, Dražen; Jozić, Sonja; Lela, Branimir

Performance of environmentally friendly machining using compressed cold air cooling: focusing on process level activities and improvements // Trends in the Development of Machinery and Associated Technology - TMT 2015 / Sabahudin, Ekinović (ur.).
Zenica: Mašinski fakultet Univerziteta u Zenici, 2015. str. 9-12 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

2037.

Puh, Franko; Jurkovic, Zoran; Cukor, Goran; Perinic, Mladen; Brezocnik, Miran; Sekulic, Milenko

MULTI-RESPONSE OPTIMIZATION OF TURNING PARAMETERS USING THE GREY-BASED TAGUCHI METHOD // 19th International Research/Expert Conference / Ekinović, S., Vivancos, J., Yalcin, S, (ur.).
Zenica: Faculty of Mechanical Engineering, Escola Tecnica Superior D'Enginyeria Industrial de Barcelona, Bahçeşehir University Istanbul, 2015. str. 13-16 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

www.tmt.unze.ba

2038.

Aleksandrov Fabijanić, Tamara; Katić, Marko; Alar, Željko; Menelao, Febo

Comparison of Vickers hardness measurement in high hardness range // Proceedings of the XXI IMEKO World Congress “Measurement in Research and Industry” IMEKO 2015. Full papers book / Jolub, Jan (ur.).
Prag: IMEKO-International Measurement Federation Secretariat, 2015. 160, 4 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

www.imeko.org

2039.

Plazibat, Bože; Vlak, Frane

An approximate analytic solution for distortion of thin-walled orthotropic beams with symmetric cross-sections subjected to torsion // 20th International Conference on Composite Materials, ICCM20 Programme and book of abstracts / Thomsen, Ole T. ; Berggreen, C. ; Sørensen, Bent F. (ur.).
Kopenhagen: MCI Copenhagen, 2015. str. 27-27 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

www.iccm20.org www.iccm-central.org

2040.

Cajner, Hrvoje; Đukić, Goran; Kovačec, Miroslav; Štefanić, Nedeljko

The analysis of lean management indicators in Croatian companies // MOTSP 2015 Conference Proceedings
Zagreb: HUPLM, 2015. (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

2041.

Pavković, Neven; Martinec, Tomislav; Rohde, Danijel; Šikić, Bruno

Management and Visualization of Relationships Between Engineering Objects // Proceedings of the 20th International Conference on Engineering Design (ICED 2015), Volume 5: Design Methods and Tools - Part 1 / Weber, Christian ; Husung, Stephan ; Cascini, Gaetano ; Cantamessa, Marco ; Marjanovic, Dorian ; Rotini, Federico (ur.).
Milano: The Design Society, 2015. str. 177-186 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

2042.

Crneković, Mladen; Pavlic, Tomislav; Lukas, Marin

Programming Language for the eMIR Mobile Robot // Proceedings of the CIM 2015-15th International Scientific Conference on Production Engineering / Abele, Eberhard ; Udiljak, Toma ; Ciglar, Damir (ur.).
Zagreb: Hrvatska udruga proizvodnog strojarstva (HUPS), 2015. str. 81-89 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

2043.

Boščić, Drago; Kos, Sebastijan; Pavlic, Tomislav

The Approach to Stronger Connection Between Machining Oriented Manufacturing Companies and Education Sector-Joint Cooperation // Proceedings of the CIM 2015-15th International Scientific Conference on Production Engineering / Abele, Eberhard ; Udiljak, Toma ; Ciglar, Damir (ur.).
Zagreb: Hrvatska udruga proizvodnog strojarstva (HUPS), 2015. str. 65-70 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

2044.

Pavlic, Tomislav; Lukas, Marin; Crneković, Mladen

Design and Control of Robotic Arm for Educational Mobile Robot // Proceedings of the CIM 2015-15th International Scientific Conference on Production Engineering / Abele, Eberhard ; Udiljak, Toma ; Ciglar, Damir (ur.).
Zagreb: Hrvatska udruga proizvodnog strojarstva (HUPS), 2015. str. 207-211 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

2045.

CHENG, Dongfeng; NIU, Jitai; GAO, Zeng; Brnić, Josip

Elements Diffusion in Brazing Seam of High Volume Fraction SiCp/6063Al Matrix Composites // Proceedings of International Conference on Frontiers in Materials Processing, Application, Research and Technology (FiMPART 15)
Hyderābād, Indija, 2015. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

www.fimpart.org

2046.

Radanović, Petar; Vrljičak, Zlatko

Veličina sile povlačenja pletiva na kružnopletaćim dvoigleničnim strojevima // 8. znanstveno-stručno savjetovanje, / Bischof, Sandra ; Penava, Željko (ur.).
Zagreb: Tekstilno-tehnološki fakultet Sveučilišta u Zagrebu, 2015. str. 136-142 (poster, domaća recenzija, cjeloviti rad (in extenso), znanstveni)

2047.

Lorković, Nenad; Tevčić, Marina

The Application of Numerical Methods for Optimization of Equipment Manufacturing in Seismic Zones // 15th International Scientific Conference on Production Engineering - Computer Integrated Manufacturing and High Speed Machining CIM 2015) : proceedings / Abele, Eberhard ; Udiljak, Toma ; Ciglar, Damir (ur.).
Zagreb: Hrvatska udruga proizvodnog strojarstva (HUPS), 2015. str. 181-184 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

2048.

Jakovljević, Suzana; Šućur Nada

Trošenje klipnjače koljenastog vratila dvotaktnog motora s vanjskim paljenjem // Matrib 2015. Materials, Wear, Recycling. In memoriam prof. dr. sc. Gojko Marić / Ćorić, Danko ; Žmak, Irena (ur.).
Zagreb: HDMT Hrvatsko društvo za materijale i tribologiju, 2015. str. 186-193 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

2049.

Jakovljević Suzana; Džoić, Marko

Trajnost matrice za izvlačenje cijevi rashladnih uređaja // Matrib 2015. Materials, Wear, Recycling. In memoriam prof. dr. sc. Gojko Marić / Ćorić, Danko ; Žmak, Irena (ur.).
Zagreb: HDMT Hrvatsko društvo za materijale i tribologiju, 2015. str. 177-185 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

2050.

Kozmar, Hrvoje; Allori, Davide; Bartoli, Gianni; Borri, Claudio

Offshore wind-turbine wake in the vicinity of coastal mountains and islands // 14th International Conference on Wind Engineering
Porto Alegre, 2015. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

2051.

Keran, Zdenka; Ciglar, Damir; Piljek, Petar

FEM support to similarity theory in metal forming // CIM 2015 Computer Integrated Manufacturing and High Speed Machining / Abele, Eberhard ; Udiljak, Toma ; Ciglar, Damir (ur.).
Zagreb: Hrvatska udruga proizvodnog strojarstva (HUPS), 2015. str. 149-152 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

2052.

Veza, Ivica; Mladineo, Marko; Peko, Ivan

Analysis of the current state of Croatian manufacturing industry with regard to Industry 4.0 // Proceedings of the 15th International Scientific Conference on Production Engineering - CIM’2015: Computer Integrated Manufacturing and High Speed Machining / Abele, Eberhard ; Udiljak, Toma ; Ciglar, Damir (ur.).
Zagreb: Hrvatska udruga proizvodnog strojarstva (HUPS), 2015. str. 249-254 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

2053.

Čegec, Nikola; Staroveški, Tomislav; Klaić, Miho; Udiljak, Toma

Development of a CNC System for Gear Hobbing Machine // 15th International Scientific Conference on Production Engineering - CIM 2015 / E. Abele, T. Udiljak, D. Ciglar (ur.).
Zagreb: HUPS, 2015. str. 91-96 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

2054.

Žmak, Irena; Kupres, Karlo; Župan, Josip

Thermal Properties of Waste Paper Composites // International Conference MATRIB 2015, Materials, Wear, Recycling. In memoriam prof. dr. sc. Gojko Marić / Ćorić, Danko ; Žmak, Irena (ur.).
Zagreb: Hrvatsko društvo za materijale i tribologiju (HDMT), 2015. str. 418-426 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

2055.

Žmak, Irena; Jakovljević, Suzana; Bernat, Marija

Comparison of Microstructure of the Adriatic Monodonta and the Mediterranean Limpet // International Conference MATRIB 2015, Materials, Wear, Recycling. In memoriam prof. dr. sc. Gojko Marić / Ćorić, Danko ; Žmak, Irena (ur.).
Zagreb: Hrvatsko društvo za materijale i tribologiju (HDMT), 2015. str. 407-417 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

2056.

Žic, Samir; Mikac, Tonči; Kos Irena; Žic, Jasmina

Bullwhip effect analysis by simulation experiments in echelon under (R, s, S) inventory policy // Proceedings of the 2nd Logistics International Conference / Vidović M., Kilibarda M., Zečević S., Miljuš M., Radivojević G. (ur.).
Beograd: Saobraćajni fakultet Univerziteta u Beogradu, 2015. str. 204-209 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

2057.

Smoljan, Božo; Iljkić, Dario; Pomenić, Loreta

Mathematical modelling and computer simulation of steel quenching // Proceedings of the 24th International Conference on Metallurgy and Materials
Brno, Češka Republika, 2015. str. - (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

2058.

Smoljan, Božo; Iljkić, Dario; Smokvina Hanza, Sunčana

Computer simulation of mechanical properties of quenched and tempered stamping punch // Proceedings of the European Conference on Heat Treatment 2015 and the 22nd IFHTSE Congress – Heat Treatment and Surface Engineering – From tradition to innovation
Venecija, Italija, 2015. str. - (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

2059.

Iljkić, Dario; Smoljan, Božo; Liverić, Lovro; Štic, Lovro

Računalna simulacija mehaničkih svojstava kaljenog i popuštenog trna za štancanje // Proceedings of ITE-SAFETY 2015 / Bognolo, Dario ; Farhatović, Mensur ; Kršulja, Marko (ur.).
Poreč: Quimedia, 2015. str. 81-88 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

2060.

Sjerić, Momir; Kozarac, Darko; Taritaš, Ivan

Modelling of Cyclic Variability in Combustion of Spark-Ignition Engine Using the Cycle- Simulation Model // AVL Advanced Simulation Technologies International User Conference 2015
Graz, Austrija, 2015. (predavanje, cjeloviti rad (in extenso), znanstveni)

2061.

Ćorić, Danko; Begović, Toni; Aleksandrov- Fabijanić, Tamara

INFLUENCE OF FOAMING TEMPERATURE ON MORFOLOGY OF METAL FOAMS // Abstract Book and Proceedings on CD of International Conference on Materials, Wear, Recycling, MATRIB 2015 / Ćorić, Danko ; Žmak, Irena (ur.).
Zagreb: Hrvatsko društvo za materijale i tribologiju (HDMT), 2015. str. 105-113 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

2062.

Ćorić, Danko; Sakoman, Matija; Perković, Marko

TRANSITION TEMPERATURE ASSESMENT USING DIFFERENT METHODS // Abstract Book and Proceedings on CD of International Conference on Materials, Wear, Recycling, MATRIB 2015 / Ćorić, Danko ; Žmak, Irena (ur.).
Zagreb: Hrvatsko društvo za materijale i tribologiju (HDMT), 2015. str. 114-122 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

2063.

Jurić, Zdeslav; Račić, Nikola; Dobrota, Đorđe

Thermodynamic Analysis of Onboard Compressed Air Supplied System // 17th International Conference on Transport Science – ICTS 2015 / Zanne, Marina ; Bajec, Patricija, Vidan, Pero (ur.).
Portorož: Fakultet za pomorstvo in promet, 2015. str. 131-137 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

2064.

Horvatić, Amalija; Runje, Biserka; Alar, Vesna; Degiuli, Nastia

COMPUTED TOMOGRAPHY – A NEW METHOD IN THE FIELDS OF DIMENSIONAL METROLOGY AND MATERIAL INSPECTION // International Conference, MATRIB 2015: MATERIALS, WEAR, RECYCLING
Vela Luka, 2015. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

2065.

Bošnjaković, Alen; Runje, Biserka; Bašić, Hazim; Softić, Almira

The Characteristics of Quality Management System in Inspection Bodies in Accordance with the International Standard ISO/IEC 17020:2012 // 9th RESEARCH/EXPERT CONFERENCE WITH INTERNATIONAL PARTICIPATION QUALITY 2015, Neum, Bosnia and Herzegovina
Neum, Bosna i Hercegovina, 2015. str. 555-562 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

2066.

de Arujo, Manuel Silvino Batalha; Fernandes, Celio; Ferras, Luis Lima; Tukovic, Zeljko; Jasak, Hrvoje; Nobrega, Joao Miguel

Implementation of integral viscoelastic constitutive models in OpenFOAM computational library // AIP Conf. Proc
Zlín, Češka Rebublika, 2015. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

dx.doi.org

2067.

Lovrin, Neven; Vrcan, Željko

Ethical Questioning Of Using Modern Economic Slavery In Contemporary Industrial Production // 7th International Scientific Conference Management of Technology – Step to Sustainable Production Conference Proceedings / Ćosić, Predrag ; Barić, Gordana ; Đukić, Goran (ur.).
Zagreb: Croatian Association for PLM, 2015. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

2068.

Vukcevic, Vuko; Jasak, Hrvoje; Malenica, Sime

Solution and Domain Decomposition Model for Naval Hydrodynamics: RANS and Potential Flow Coupling // VI International Conference on Computational Methods in Marine Engineering / Salvatore, Francesco ; Broglia, Riccardo ; Muscari, Roberto (ur.).
Rim: International Center for Numerical Methods in Engineering (CIMNE), 2015. str. 903-918 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

2069.

Marenić, Eduard; Ibrahimbegovic, Adnan

Multiscale elastic properties of graphene for moderate deformations // Proceedings of 2nd International Conference on Multi-scale Computational Methods for Solids and Fluids / Ibrahimbegović, A. ; Ghidaglia, J.-M. ; Serdarević, A. ; Ilić-Georgijević, E. ; Hrasnica, M. ; Dolarević, S. ; Ademović, N. (ur.).
Sarajevo, 2015. str. 149-152 (pozvano predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

2070.

Jerbić, Bojan; Stipančić, Tomislav; Tomašić, Tomislav

Robotic Bodily Aware Interaction within Human Environments // Proceedings of 2015 SAI Intelligent Systems Conference (IntelliSys)
London : Delhi, 2015. str. 305-314 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

2071.

Zhao, Guoying, Alujević, Neven, Depraetere, Bruno, Pinte, Gregory, Swevers, Jan, Sas, Paul

A pair of piezo-based rotating inertial actuators for active structural acoustic control of rotating machinery // Proceedings of the 25th International Conference on Adaptive Structures and Technologies (ICAST 2014)
Zürich: ETH Zurich, 2015. str. 145-156 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

2072.

Horvatić, Amalija; Runje, Biserka

CALIBRATION METHODS OF THE DIMENSIONAL METROLOGY X- RAY CT SYSTEM // 15. International scientific conference on production engineering COMPUTER INTEGRATED MANUFACTURING AND HIGH SPEED MACHINING CIM 2015
Vodice, 2015. str. 123-126 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

2073.

Šterpin, Graciela; Cukor, Goran; Jurković, Zoran; Brezočnik, Miran

Simple Shearing and Ploughing Cutting Force Model in Turning Operation with Nose Radius Tool // CIM 2015: Computer Integrated Manufacturing and High Speed Machining / Abele, Eberhard ; Udiljak, Toma ; Ciglar, Damir (ur.).
Zagreb: Hrvatska udruga proizvodnog strojarstva HUPS, 2015. str. 231-234 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

2074.

Kostadin, Tihana; Cukor, Goran

An Overview of the Development and Use of Coolant and Lubricant Systems in Machining // CIM 2015: Computer Integrated Manufacturing and High Speed Machining / Abele, Eberhard ; Udiljak, Toma ; Ciglar, Damir (ur.).
Zagreb: Hrvatska udruga proizvodnog strojarstva HUPS, 2015. str. 153-160 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

2075.

Alujević, Neven; Campillo-Davo, Nuria; Kindt, Peter; Desmet, Wim; Pluymers, Bert; Vercammen, Stijn

A simplified tire model based on a rotating shell // Proceedings of the 4th International Tyre Colloquium / Gruber, P. ; Sharp, R. (ur.).
Guildford: University of Surrey, 2015. str. 383-392 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada epubs.surrey.ac.uk

Pregled po znanstvenom području: Strojarstvo (MB: 2.11)

Radovi u zbornicima skupova

Znanstveni radovi u zbornicima skupova