Pregled po znanstvenom području: Strojarstvo (MB: 2.11)

876.

Davor Poljak

Identification of Lean and Green Wastes in a Water Supply Organization and Their Impact on Water Losses in Water Supply Systems // LEAN SPRING SUMMIT 2019 / Štefanić, Nedeljko ; Cajner, Hrvoje (ur.).
Zagreb: CULMENA d.o.o, 2019. str. 13-21 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

877.

Živić, Josip; Batistić, Ivan; Tuković, Željko; Karšaj, Igor

Modeliranje nestlačivosti metodom kontrolnih volumena i njena primjena u području biomehanike // Zbornik radova 9. susreta Hrvatskog društva za mehaniku - "50 godina Društva" / Skozrit, Ivica ; Tonković, Zdenko ; Karšaj, Igor ; Jarak, Tomislav ; Lesičar, Tomislav (ur.).
Zagreb: Hrvatsko društvo za mehaniku (HDM), 2019. str. 343-349 (predavanje, domaća recenzija, cjeloviti rad (in extenso), znanstveni)

878.

Ćurko, Daria; Leder Horina, Jasna; Jurčević Lulić, Tanja

Utjecaj vibracija na ortodontski pomak zuba // Zbornik radova 9. susreta Hrvatskog društva za mehaniku - "50 godina Društva" / Skozrit, Ivica ; Tonković, Zdenko ; Karšaj, Igor ; Jarak, Tomislav ; Lesičar, Tomislav (ur.).
Zagreb: Hrvatsko društvo za mehaniku (HDM), 2019. str. 113-118 (predavanje, domaća recenzija, cjeloviti rad (in extenso), znanstveni)

879.

Trapić, Ivan; Pezer, Robert; Sorić, Jurica

Od modeliranja na atomističkoj razini do kontinuumske konstitutivne jednadžbe // Zbornik radova devetog susreta Hrvatskog društva za mehaniku / Skozrit, Ivica ; Tonković, Zdenko ; Karšaj, Igor ; Jarak, Tomislav ; Lesičar, Tomislav (ur.).
Zagreb: Hrvatsko društvo za mehaniku (HDM), 2019. str. 293-298 (predavanje, domaća recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

880.

Damjanović, Darko; Kozak, Dražan; Konjatić, Pejo; Turk, Dorian

Prstenasti ispitni uzorak za mjerenje lomne žilavosti materijala cijevi // Zbornik radova 9. susreta Hrvatskog društva za mehaniku / Skozrit, Ivica ; Tonković, Zdenko. ; Karšaj, Igor. ; Jarak, Tomislav ; Lesičar, Tomislav (ur.).
Zagreb: Hrvatsko društvo za mehaniku (HDM), 2019. str. 119-124 (predavanje, domaća recenzija, cjeloviti rad (in extenso), znanstveni)

881.

Andrun, Martina; Blagojević, Branko; Bašić, Josip; Milas, Zoran

An Analysis of the Ventilated Flow on a Rudder // Proceedings of the Twenty-ninth International Ocean and Polar Engineering ConferenceInternational Society of Offshore and Polar Engineers (ISOPE)
Honolulu (HI), Sjedinjene Američke Države, 2019. str. 4625-4631 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

onepetro.org

882.

Barbir, Ante; Dobrota, Đorđe; Barle, Jani; Vukojević, Dušan

Optimal Strategy for Maintenance of Reliquefaction System on LNG Carrier // Book of Proceedings: 8th International Maritime Science Conference / Ivošević, Špiro ; Vidan, Pero (ur.).
Kotor: Faculty of Maritime Studies in Kotor ; Faculty of Maritime Studies in Split, 2019. str. 363-370 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

imsc.pfst.hr

883.

Šimunović, Jakov; Barbir, Frano; Radica, Gojmir; Klarin, Branko

Techno-economic analysis of PV/wind turbine stand- alone energy system // SpliTech2019
Split, Hrvatska; Bol, Hrvatska, 2019. 1570537819, 5 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

884.

Budžaki, Sandra; Leko, Jozo; Predrijevac, Krešimir; Leko, Tomislav; Viszmeg, Jožef; Jovanović, Kristina

The innovative solutions and the development of a low-energy air dryer // Proceedings of the 10th International Congress Flour–Bread ’19 and 12th Croatian Congress of Cereal Technologists Brašno–Kruh ’19. / Strelec, Ivica ; Jozinović, Antun ; Budžaki, Sandra (ur.).
Osijek: Grafika Osijek, 2019. str. 133-141 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

repozitorij.ptfos.hr urn.nsk.hr

885.

Stoilova, Anamarija; Penga, Željko; Barbir, Frano

Estimating temperature in the catalyst layer of the PEM fuel cell // Book of Proceedings / Cigolotti, Viviana (ur.).
Rim: ITALIAN NATIONAL AGENCY FOR NEW TECHNOLOGIES, ENERGY AND SUSTAINABLE ECONOMIC DEVELOPMENT, 2019. str. 37-38 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

886.

Penga, Jure; Penga, Željko

Computational fluid dynamics analysis of sea water mixing inside a ballast tank using volume of fluid method // SpliTech2019
Split, Hrvatska; Bol, Hrvatska, 2019. str. pdf-pdf (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

887.

Priegl, Domagoj; Jurčević, Mišo; Penga, Željko; Nižetić, Sandro

Computational fluid dynamics analysis and design exploration of water-cooled photovoltaics subjected to various operating conditions // SpliTech2019
Split, Hrvatska; Bol, Hrvatska, 2019. str. pdf-pdf (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

888.

Dedić-Jandrek, Hrvoje; Penga, Željko; Nižetić, Sandro

Transient numerical analysis and experimental validation Archimedes screw hydro turbine // 4th International Conference on Smart and Sustainable Technologies (SpliTech 2019)
Split, Hrvatska; Bol, Hrvatska, 2019. str. pdf-pdf (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

889.

Penga, Željko; Radica, Gojmir; Tolj, Ivan; Barbir, Frano

Experimental investigation of dynamic performance of PEM fuel cell using a segmented single-cell // SpliTech2019
Split, Hrvatska; Bol, Hrvatska, 2019. str. pdf-pdf (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

890.

Penga, Željko; Penga, Jure; Barbir, Frano

Influence of Channel and Substrate Hydrophobicity on the Dynamic Water Transport Inside PEM Fuel Cell Channels // SpliTech2019
Split, Hrvatska; Bol, Hrvatska, 2019. str. pdf-pdf (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

891.

Trstenjak, Maja; Lisjak, Dragutin; Opetuk, Tihomir; Pavković, Danijel

Application of multi criteria decision making methods for readiness factor calculation // Proceedings of 18th IEEE International Conference on Smart Technologies EUROCON 2019 / Dumnić, Boris (ur.).
Novi Sad: University, Faculty of Technical Sciences, 2019. 05428, 6 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

892.

Konjatić, Pejo; Dautović, Stjepan; Ostojić, Zvonimir; Sertić, Josip

SEISMIC ACTION INFLUENCE ON THE PRESSURE PARTS OF THE WATERTUBE STEAM BOILER CONSTRUCTION // V INTERNATIONAL SCIENTIFIC CONGRESS INNOVATIONS 2019 - PROCEEDINGS
Varna, 2019. str. 107-110 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

893.

Krznar, Matija; Pavković, Danijel; Cipek, Mihael; Zorc, Davor; Kolar, Davor; Kotarski, Denis

Damping Optimum-based Design of State Controller and Observer for Drill-String Rotary Speed Control // Proceedings of 18th IEEE International Conference on Smart Technologies EUROCON 2019 / Dumnić, Boris (ur.).
Novi Sad: University, Faculty of Technical Sciences, 2019. 2323, 6 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

894.

Pavković, Danijel; Cipek, Mihael; Plavac, Filip; Šprljan, Pavle; Jurišić, Goran

Damping Optimum Tuning of Drill-string Torquebased Torsional Vibrations Suppression System // Proceedings of 18th IEEE International Conference on Smart Technologies EUROCON 2019 / Dumnić, Boris (ur.).
Novi Sad: University, Faculty of Technical Sciences, 2019. 02228, 6 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

895.

Šolić, Sanja; Schauperl, Zdravko; Ćatić, Amir; Tropša, Vlado

Primjena aditivnih tehnologija u izradi CoCr dentalnih fiksno-protetskih konstrukcija // Conference proceedings 20th International Conference on Materials MATRIB 2019 / Šolić, Sanja ; Schauperl, Zdravko ; Pugar, Daniel (ur.).
Zagreb: Hrvatsko društvo za materijale i tribologiju (HDMT), 2019. str. 287-294 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

896.

Dorotić, Hrvoje; Pukšec, Tomislav; Duić, Neven

Exergy destruction and carbon dioxide emission taxes and their influence on district heating system optimization // Proceedings of the 32nd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems
Wrocław, Poljska, 2019. str. 1377-1388 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

897.

Dumanić, Ivana; Krolo, Jure; Jozić, Sonja; Lela, Branimir; Bajić, Dražen; Ljumović, Petar

INFLUENCE OF THE PROCESSING ROUTE ON THE MICROSTRUCTURE FORMATION AT SEMI-SOLID TEMPERATURES FOR ALUMINUM ALLOY A380 // CONFERENCE PROCEEDINGS of the 20th International Conference on Materials / Šolić, Sanja ; Schauperl, Zdravko ; Pugar, Daniel (ur.).
Zagreb: Hrvatsko društvo za materijale i tribologiju (HDMT), 2019. str. 137-144 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

898.

Ćorić, Danko; Sakoman, Matija; Dragojević, Roman

Influence of the Stress Rate on the Results of Tensile Testing // Book of Abstracts and Conference Proceedings on USB of 20th International Conference on Materials, Tribology, Recycling, MATRIB 2019 / Šolić, Sanja ; Schauperl, Zdravko ; Pugar, Daniel (ur.).
Zagreb: Hrvatsko društvo za materijale i tribologiju (HDMT), 2019. str. 119-126 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

899.

Runje, Biserka; Alar, Vesna; Horvatić Novak, Amalija; Stanković, Matko; Ajduković, Ante

The requirements on surface roughness of stainless steel for general purposes // Matrib 2019.
Zagreb, 2019. str. 279-286 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

900.

Flegarić, Stjepan; Savšek, Tomaž; Štorga, Mario

Method for analysis of smart sheet metal forming tools strip layout // Proceedings of Reviewed Papers of 4th International Scientific Conference on the Development of Industrial Engineering: Opportunities, Potentials, Challenges / Fink Grubačević, Iris (ur.).
Novo Mesto: Faculty of Industrial Engineering Novo mesto, 2019. str. 17-22 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

901.

Kukec, Goran

ROBOTIC PROCESS AUTOMATION – A JOURNEY THROUGH DIGITAL TRANSFORMATION // 4th International Scientific Conference Lean Spring Summit 2019 CONFERENCE PROCEEDINGS / Štefanić, Nedeljko ; Cajner, Hrvoje (ur.).
Zagreb: Culmena d.o.o., 2019. str. 89-93 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

902.

Kukec, Goran; Štefanić, Nedeljko

Application of Digitalization and Automation in Production and Services // 4th International Scientific Conference Lean Spring Summit 2019 CONFERENCE PROCEEDINGS / Štefanić, Nedeljko ; Cajner, Hrvoje (ur.).
Zagreb: Culmena d.o.o., 2019. str. 6-12 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

903.

Mrzljak, Vedran; Orović, Josip; Poljak, Igor; Čulin, Jelena

The ambient temperature influence on deaerator exergy efficiency and exergy losses // IV INTERNATIONAL SCIENTIFIC CONFERENCE INDUSTRY 4.0 - Summer Session - 2019 - PROCEEDINGS / Popov, Georgi ; Ovtcharova, Jivka (ur.).
Sofija: Scientific technical union of mechanical engineering “Industry-4.0”, 2019. str. 69-72 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada industry-4.eu industry-4.eu

904.

Mrzljak, Vedran; Orović, Josip; Poljak, Igor; Čulin, Jelena

Exergy analysis of two water pumps from steam power plant at four different loads // IV INTERNATIONAL SCIENTIFIC CONFERENCE INDUSTRY 4.0 - Summer Session - 2019 - PROCEEDINGS / Popov, Georgi ; Ovtcharova, Jivka (ur.).
Sofija: Scientific technical union of mechanical engineering “Industry-4.0”, 2019. str. 65-68 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada industry-4.eu industry-4.eu

905.

Mrzljak, Vedran; Orović, Josip; Poljak, Igor; Lorencin, Ivan

Exergy analysis of steam turbine governing valve from a super critical thermal power plant // XXVII INTERNATIONAL SCIENTIFIC CONFERENCE trans & MOTAUTO ’19 - PROCEEDINGS / Kolev, Petar (ur.).
Sofija: Scientific technical union of mechanical engineering “Industry-4.0”, 2019. str. 99-102 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada trans-motauto.com trans-motauto.com

906.

Mrzljak, Vedran; Žarković, Božica; Prpić-Oršić, Jasna; Anđelić, Nikola

Numerical analysis of in-cylinder pressure and temperature change for naturally aspirated and upgraded gasoline engine // XXVII INTERNATIONAL SCIENTIFIC CONFERENCE trans & MOTAUTO ’19 - PROCEEDINGS / Kolev, Petar (ur.).
Sofija: Scientific technical union of mechanical engineering “Industry-4.0”, 2019. str. 95-98 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada trans-motauto.com trans-motauto.com

907.

Marić, Anamarija

IMPACT OF SOCIO-TECHNICAL SYSTEMS USED IN PROJECT MANAGEMENT ON PROJECT SUCCESS // Book of Proceedings of 4th International Scientific Conference LEAN Spring Summit / Štefanić, Nedeljko ; Cajner, Hrvoje (ur.).
Zagreb: Zagreb : Culmena d.o.o., 2019. str. 43-47 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

908.

Štefanić, Nedeljko; Brnadić, Tomislav; Veža, Ivica

DIGITAL TRANSFORMATION OF INDUSTRY IN CROATIA // Proceedings of 4th International Scientific Conference Lean Spring Summit 2019 / Štefanić, Nedeljko ; Cajner, Hrvoje (ur.).
Zagreb: Culmena, 2019. str. 108-112 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

909.

Sponsel, Paul; Žmak, Irena; Vukšić, Milan

The characteristics and environmental aspects of magnesium thixomolding versus die casting process // Proceedings book - 18th International foundrymen conference - Coexistence of material science and sustainable technology in economic growth / Dolić, Natalija ; Zovko Brodarac, Zdenka ; Begić Hadžipašić, Anita (ur.).
Sisak: University of Zagreb, Faculty of Metallurgy, Aleja narodnih heroja 3, Sisak, Croatia, 2019. str. 349-362 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

910.

Lokas, Lea; Alar, Vesna

Electrochemical properties of AA5083 and AA6060 alloys in seawater // 18th International Foundrymen Conference / Natalija Dolić (ur.).
Sisak: Faculty of metallurgy, 2019. str. 115-120 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

911.

Bratić, Karlo; Stazić, Ladislav; Mišura, Antonija; Jurić, Zdeslav

Spare Parts Optimization Using A Planned Maintenance System // Book of Proceedings, 8th International Maritime Science Conference / Ivošević, Špiro ; Vidan, Pero (ur.).
Kotor: CIP - Nacionalna biblioteka Crne Gore, 2019. str. 389-395 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada imsc.pfst.hr

912.

Mišura, Antonija; Stazić, Ladislav; Stanivuk, Tatjana; Komar, Ivan

Verification of the Evaluation Methodology for Ship’s Planned Maintenance System Database // Book of Proceedings, 8th International Maritime Science Conference / Ivošević, Špiro ; Vidan, Pero (ur.).
Kotor: CIP - Nacionalna biblioteka Crne Gore, 2019. str. 441-445 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

imsc.pfst.hr

913.

Ravnik, Jure; Šušnjara, Anna; Tibaut, Jan; Poljak, Dragan; Cvetković, Mario

Stochastic analysis of nanofluid simulations // 1st International Conference on Nanofluids (ICNf2019) ; 2ndEuropean Symposium on Nanofluids (ESNf2019) (2019)
Castelló de la Plana, Španjolska, 2019. str. 1-6 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

914.

Bedoić, Robert; Špehar, Ana; Čuček, Lidija; Ćosić, Boris; Pukšec, Tomislav; Duić, Neven

Anaerobic digestion of pretreated food waste and bone meal // Online Proceedings of the 27th EUBCE – Lisbon 2019
Lisabon, Portugal, 2019. 2CV.6.23, 5 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

915.

Kamenar, Ervin; Perčić, Marko; Zelenika, Saša

From nanometric to meso-scale characterisation of friction using nanoindentation // Proceedings of the 19th EUSPEN International Conference / Leach, R. K. ; Billington, D. ; Nisbet, C. ; Phillips, D. (ur.).
Cranfield: EUSPEN, 2019. str. 72-73 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

916.

Knežević, Vlatko; Stazić, Ladislav; Orović, Josip; Mihanović, Luka

Use of PMS Continuous Improvement Scheme for Maintenance Adjustments in Shipping Industry // Book od Proceedings - 8th International Maritime Science Conference (IMSC 2019) / Ivošević, Špiro ; Vidan, Pero (ur.).
Kotor: CIP - Nacionalna biblioteka Crne Gore, 2019. str. 415-420 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

imsc.pfst.hr

917.

Belošević, Andrija; Stepanić, Josip; Runje, Biserka; Horvatić Novak, Amalija

Smart dimensional measurements in high-series automotive industry // Proceedings of 4th International Conference Lean Spring Summit 2019 / Štefanić, N. ; Cajner, H. (ur.).
Zagreb: Culmena, 2019. str. 37-42 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

918.

Škurić, Vanja; Jasak, Hrvoje; Almqvist, Andreas; De Jaeger, Peter

Finite Area Algorithm for Thin Film Cavitation in OpenFOAM // Proceedings from Conference for Young Researches - Technical Sciences and Industrial Management 2019 / Econ, Cyril Angelov (ur.).
Borovets: THE SCIENTIFIC TECHNICAL UNION OF MECHANICAL ENGINEERING "INDUSTRY 4.0", 2019. str. 7-11 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

youngconference.com

919.

Mrzljak, Vedran; Orović, Josip; Poljak, Igor; Kocijel, Lino

Exergy analysis of wet cooling tower at various loads and ambient temperatures // VII INTERNATIONAL SCIENTIFIC CONFERENCE - ENGINEERING. TECHOLOGIES. EDUCATION. SECURITY. 2019 - PROCEEDINGS - VOLUME 1 / Tokarev, Alexander (ur.).
Sofija: Scientific technical union of mechanical engineering “Industry-4.0”, 2019. str. 16-19 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada techtos.net techtos.net

920.

Mrzljak, Vedran; Orović, Josip; Poljak, Igor; Knežević, Vlatko

Exergy analysis of low-pressure condensate heating system from cogeneration power plant // VII INTERNATIONAL SCIENTIFIC CONFERENCE - ENGINEERING. TECHOLOGIES. EDUCATION. SECURITY. 2019 - PROCEEDINGS - VOLUME 1 / Tokarev, Alexander (ur.).
Sofija: Scientific technical union of mechanical engineering “Industry-4.0”, 2019. str. 12-15 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada techtos.net techtos.net

921.

Vidaković, Ivan; Heffer, Goran; Šimunović, Katica; Barač, Željko; Đurkić, Antonio

Analiza trošenja kotrljajućih ležaja trakastog transportera za sjeme suncokreta // Proceedings & abstract of the 12th International Scientific/Professional Conference Agriculture in Nature and Environment Protection / Jug, Danijel ; Brozović, Bojana (ur.).
Osijek: Glas Slavonije d.d., Osijek, 2019. str. 283-288 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

922.

Cerinski , Damijan; Baleta, Jakov; Lovrenić - Jugović , Martina

Utilizing a neural network modelling approach in the fixed bed biomass gasifier // Proceedings of the 14th International Conference on Accomplishments of Electrical and Mechanical Industries / Gvero, Petar ; Prochalska, Biljana ; Stipanović , Milivoj (ur.).
Banja Luka: Faculty of Mechanical Engineering University of Banja Luka, 2019. 28, sekcija 2/2, 1 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

923.

Soldo, Jure; Škugor, Branimir; Deur, Joško

Optimal Energy Management Control of a Parallel Plug in Hybrid Electric Vehicle in the Presence of Low Emission Zones // SAE Technical Paper #2019-01-1215
Detroit (MI), Sjedinjene Američke Države, 2019. 2019-01-1215, 11 doi:10.4271/2019-01-1215 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

doi

924.

Štrbac, Branko; Hadžistević, Miodrag; Runje, Biserka; Horvatić Novak, Amalija; Matin, Ivan; Jotić, Goran

The analysis of the accuracy and evaluation measurement uncertainty of CMM using ball bar // Proceedings of the 14th International Conference on Accomplishments in Mechanical and Industrial Engineering / Gvero, Petar (ur.).
Banja Luka: University of Banja Luka, Faculty of Mechanical Engineering, 2019. str. 545-551 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

925.

Škugor, Branimir; Soldo, Jure; Deur, Joško

Analysis of Optimal Battery State-of-Charge Trajectory for Blended Regime of Plug-in Hybrid Electric Vehicle // EVS32 PROCEEDINGS
Lyon, Francuska, 2019. str. 1-12 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

926.

Pezer, Danijela

Increasing the Production Productivity with Artificial Bee Colony Optimisation Method // Advances of Manufacturing II - Volume 1 - Solutions for Industry 4.0 / Trojanowska, Justyna ; Ciszak, Olaf ; Mendes Machado, José ; Pavlenko, Ivan (ur.).
Cham: Springer, 2019. str. 48-61 doi:10.1007/978-3-030-18715-6_5 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

doi

927.

Šimunović, Vinko; Alar, Vesna; Jakopčić, Mirko

Stainless steel corrosion case studies // AVT-303 Research Workshop on Corrosion Management / Liao, Min ; Hoen-Velterop, Ludmila (ur.).
Neuilly-sur-Seine: NATO Science and technology organization, 2019. str. 1-12 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

928.

Koboević, Žarko; Jovančević, Marjan; Jurjević, Mate; Car, Maro

Integrated Systems for Processing All Types of Waste on Ships // Book of Proceedings 8th International Maritime Science Conference, April11th-12th 2019. Budva Montenegro / Ivošević, Špiro ; Vidan, Pero (ur.).
Kotor: Birokonto, Herceg Novi, 2019. str. 283-294 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

www.imsc2019.ucg.ac.me

929.

Kladarić, Ivica; Golubić, Stjepan; Kladarić, Slavica

UTJECAJ NANOŠENJA PVD PREVLAKA NA HRAPAVOST POVRŠINE ČELIKA ZA POBOLJŠAVANJE // PROCEEDINGS BOOK 18th INTERNATIONAL FOUNDRYMEN CONFERENCE Coexistence of material science and sustainable technology in economic growth / Dolić, Natalija ; Zovko Brodarac, Zdenka ; Begid Hadžipašid, Anita (ur.).
Sisak: Metalurški fakultet Sveučilišta u Zagrebu, 2019. str. 19-30 (pozvano predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

930.

Smoljan, Božo; Iljkić, Dario; Smokvina Hanza, Sunčana

Prediction of working stress of quenched and tempered steel and cast steel specimen // 18th International Foundrymen Conference - Coexistence of material science and sustainable technology in economic growth
Sisak, Hrvatska, 2019. str. - (pozvano predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

931.

Gudić, Senka; Rakuljić, Blanka; Vrsalović, Ladislav; Bizjak, Milan; Ivanić, Ivana; Kožuh, Stjepan; Gojić, Mirko

Influence of Mn on the corrosion behavior of CuAlMn alloy in NaCl solution // Proceedings book 18th International Foundryman Conference, Coexistence of material science and sustainable technology in economic growth / Dolić, Natalija ; Zovko Brodarac, Zdenka ; Begić Hadžipašić, Anita (ur.).
Sisak: Metalurški fakultet Sveučilišta u Zagrebu, 2019. str. 227-236 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

932.

Vrsalović, Ladislav; Ivanić, Ivana; Kožuh, Stjepan; Kosec, Borut; Bizjak, Milan; Gudić, Senka; Gojić, Mirko

Corrosion behavior of CuAlMn and CuAlMnNi alloy in 0.9% NaCl solution // Proceedings book, 18th International Foundryman Conference, Coexistence of material science and sustainable technology in economic growth / Dolić, Natalija ; Zovko Brodarac, Zdenka ; Begić Hadžipašić, Anita (ur.).
Sisak: Metalurški fakultet Sveučilišta u Zagrebu, 2019. str. 378-386 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

933.

Šolić, Sanja; Podgornik, Bojan; Schauperl, Zdravko; Godec, Matjaž; Bauer, Branko; Tropša, Vlado

Utjecaj dubokog hlađenja na mehanička svojstva ADI-a poboljšanog u području donjeg ausferita // PROCEEDINGS BOOK - 18th INTERNATIONAL FOUNDRYMEN CONFERENCE - Coexistence of material science and sustainable technology in economic growth / Dolić, Natalija ; Zovko Brodarac, Zdenka ; Begić Hadžipašić, Anita (ur.).
Sisak: University of Zagreb Faculty of Metallurgy Aleja narodnih heroja 3 44000 Sisak Croatia, 2019. str. 370-377 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

934.

Ančić, Ivica; Perčić, Maja; Theotokatos, Gerasimos; Vladimir, Nikola

A novel approach towards more realistic energy efficiency regulations for tankers // Proceedings of the 2nd International Conference on Modelling and Optimisation of Ship Energy Systems (MOSES 2019) / Theotokatos, Gerasimos ; Coraddu, Andrea (ur.).
Glasgow: University of Strathclyde, 2019. str. 183-188 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

935.

Ančić, Ivica; Perčić, Maja; Runko Luttenberger, Lidija; Vladimir, Nikola

Potential to reduce environmental pollution from ships through the modular concept approach // 8th International Maritime Science Conference (IMSC 2019) / Ivošević, Š. ; Vidan, P. (ur.).
Kotor: Faculty of Maritime Studies in Kotor, University of Montenegro, 2019. str. 371-375 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada imsc.pfst.hr

936.

Vujanović, Milan; Jurić, Filip; Petranović, Zvonimir; Katrašnik, Tomaž; Vihar, Rok; Tatschl, Reinhard

Coupled Experimental and Numerical Investigation of Reactive Spray Processes in Internal Combustion Engine // Proceedings of 9th European Combustion Meeting 2019
Lisabon, Portugal, 2019. str. 73-73 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

937.

Jurić, Filip; Petranović, Zvonimir; Vujanović, Milan; Priesching, Peter; Tatschl, Reinhard

Implementation and validation of the discrete ordinates method for calculation of radiative heat transfer in the CFD software AVL FIRE™ // Proceedings of 9th European Combustion Meeting 2019
Lisabon, Portugal, 2019. str. 353-353 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

938.

Kozhushko, Yuliia; Pavković, Danijel; Zinchenko, Denys; Karbivska, Tetiana; Sydorets, Volodymyr; Bondarenko, Oleksandr

Hybrid Energy Storage System of Power Supply for Micro Resistance Welding // Proceedings of 2019 IEEE 39th International Conference on ELECTRONICS AND NANOTECHNOLOGY (ELNANO) / Borisov, Alexander ; Poplavko, Yuriy (ur.).
Kijev: Institute of Electrical and Electronics Engineers (IEEE), 2019. str. 584-589 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

939.

Pavković, Danijel; Kozhushko, Yuliia; Hrgetić, Mario; Zorc, Davor; Cipek, Mihael

Damping Optimum Design of Single-Phase Inverter Synchronization and Current Control System // Proceedings of 2019 IEEE 39th International Conference on ELECTRONICS AND NANOTECHNOLOGY (ELNANO) / Borisov, Alexander ; Poplavko, Yuriy (ur.).
Kijev: Institute of Electrical and Electronics Engineers (IEEE), 2019. str. 572-577 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

940.

Kozarac, Darko; Sremec, Mario; Božić, Mladen; Vučetić, Ante

The Performance and Emissions of a Conventional Natural Gas/Diesel Dual Fuel Engine at Various Operating Conditions // SEA Internatuonal
Detroit (MI), Sjedinjene Američke Države, 2019. 2019-01-1158, 14 doi:10.4271/2019-01-1158 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

doi www.sae.org

941.

Vučetić, Ante; Božić, Mladen; Sremec, Mario; Kozarac, Darko

OPERATING PARAMETERS OF THE BIOGAS-DIESEL DUAL- FUEL ENGINE // Proceedings of the European Combustion Meeting – 2019 / Pereira, Sandrina ; Costa, Mario (ur.).
Lisabon, 2019. S1_AIII_68, 6 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

ecm2019lisbon.wixsite.com

942.

Božić, Mladen; Vučetić, Ante; Sremec, Mario; Kozarac, Darko

EXPLORATION OF THE HIGH LOAD LIMITS IN DUAL-FUEL COMBUSTION OPERATION // Proceedings of the European Combustion Meeting – 2019 / Pereira, Sandrina ; Costa, Mario (ur.).
Lisabon, 2019. S1_AIII_67, 6 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

ecm2019lisbon.wixsite.com

943.

Bešenić, Tibor; Baleta, Jakov; Vujanović , Milan; Pachler, Klaus; Tatcshl, Reinhard

Investigation of the Sulfur Dioxide Absorption in Water Droplets // Proceedings of the European Combustion Meeting – 2019
Lisabon, Portugal, 2019. str. - (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

944.

Cerinski, Damijan; Baleta, Jakov; Wang, Jin; Wang, Xuebin

The influence of film cooling flow over turbine blades from different shaped holes // Proceedings of the European Combustion Meeting 2019 / Costa, Mário ; Pereira, Sandrina (ur.).
Lisabon: Instituto Superior Técnico, 2019. Paper_S2_R1_71, 6 (poster, cjeloviti rad (in extenso), znanstveni)

945.

Krstulović-Opara, Lovre; Bagavac, Petra; Božanić, Antun; Domazet, Željko

Kontrola bez razaranja kompozita temeljena na aktivnoj infracrvenoj termografiji i ultrazvučnom ispitivanju // 6. MEĐUNARODNOG KONGRESA DANI INŽENJERA STROJARSTVA / Dorić, Željko (ur.).
Zagreb, 2019. str. 219-224 (plenarno, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

946.

Bušić, Matija; Jurica, Maja; Garašić, Ivica; Kožuh, Zoran

A-TIG welding as a solution for nickel and manganese savings in duplex stainless steel welded joints // INTERNATIONAL SCIENTIFIC CONFERENCE MACHINES. TECHNOLOGIES. MATERIALS. VOLUME I MACHINES. TECHNOLOGIES. MATERIALS / Popov, Georgi (ur.).
Sofija: SCIENTIFIC TECHNICAL UNION OF MECHANICAL ENGINEERING INDUSTRY-4.0, 2019. str. 38-41 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

mtmcongress.com

947.

Krstulović-Opara, Lovre; Bagavac, Petra; Božanić, Antun; Domazet, Željko

Kontrola bez razaranja kompozita temeljena na aktivnoj infracrvenoj termografiji i ultrazvuku // Zbornik radova 6. kongresa Dani inženjera strojarstva / Šiško Kuliš, Marija ; Dorić, Željko (ur.).
Zagreb: Grafocentar sesvete, 2019. str. 192-197 (predavanje, domaća recenzija, cjeloviti rad (in extenso), znanstveni)

948.

Glažar, Vladimir; Trp, Anica; Lenić Kristian; Torbarina, Fran

Numerical analysis of heat transfer in air-water heat exchanger with microchannel coil // E3S Web of Conferences Volume 95 (2019) The 3rd International Conference on Power, Energy and Mechanical Engineering (ICPEME 2019) / Agarwal, Ramesh K. (ur.).
Prag, Češka Republika: EDP Sciences, 2019. 02004, 7 doi:10.1051/e3sconf/20199502004 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

doi www.e3s-conferences.org

949.

Radan, Bože; Tolj, Ivan; Sedlar, Damir; Radica, Gojmir

KINEMATIKA GIBANJA KOLJENASTOG MEHANIZMA S NEGATIVNOM PIVOT TOČKOM // CROATIAN CHAMBER OF MECHANICAL ENGINEERS / Dorić, Željko (ur.).
Zagreb: HKIS, 2019. str. 344-349 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

950.

Srpak, Dunja; Fülöp, Laszlo; Elmer, George

EVALUATION OF THE INTERDISCIPLINARY CURRICULUM FOR NZEB // INTED2019 Proceedings, 13th International Technology, Education and Development Conference / Chova, L. Gómez ; Martínez, A. López ; Torres, I. Candel (ur.).
Valencia: International Academy of Technology, Education and Development (IATED), 2019. str. 5031-5035 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

951.

Šomođi, Željko; Pavlović, Željka; Zdraveva, Emilija; Vrljičak, Zlatko

An Introductory Computational Deformational Model of Limb-Sock Interaction // Book of Proceedings – 12th International Scientific-Professional Symposium Textile Science & Economy 2019 French-Croatian Forum / Novak, Ivan ; Schwarz, Ivana ; Špelić, Ivana ; Zdraveva, Emilija (ur.).
Zagreb: Tekstilno-tehnološki fakultet Sveučilišta u Zagrebu, 2019. str. 123-130 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

tzg2019.org

952.

Balić, Dražen; Židov, Bruno; Čop, Tomislav

Synergy of RES and E mobility as Key for Energy Efficiency of an Energy System // Digital proceedings of Young Energy Researchers Conference, WSED2019
Wels, 2019. str. 1-15 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

953.

Mrzljak, Vedran; Žarković, Božica; Prpić-Oršić, Jasna

Air cooling influence on the performance and characteristics of turbocharged direct injection gasoline engine // INTERNATIONAL CONFERENCE TECHNICAL SCIENCES. INDUSTRIAL MANAGEMENT 2019 - PROCEEDINGS / Angelov, Cyril (ur.).
Sofija: Scientific technical union of mechanical engineering “Industry-4.0”, 2019. str. 3-6 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada youngconference.com youngconference.com

954.

Mrzljak, Vedran; Poljak, Igor; Orović, Josip; Prpić-Oršić, Jasna

Thermodynamical analysis of heat exchange and fuel consumption in marine re-heat steam generator // INTERNATIONAL SCIENTIFIC CONFERENCE HIGH TECHNOLOGIES. BUSINESS. SOCIETY 2019 - Volume 1 - PROCEEDINGS / Popov, Georgi ; Stavrev, Dimitar (ur.).
Sofija: Scientific technical union of mechanical engineering “Industry-4.0”, 2019. str. 55-58 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada hightechsociety.eu hightechsociety.eu

955.

Mrzljak, Vedran; Poljak, Igor; Orović, Josip; Prpić-Oršić, Jasna

Numerical analysis of real open cycle gas turbine // INTERNATIONAL SCIENTIFIC CONFERENCE HIGH TECHNOLOGIES. BUSINESS. SOCIETY 2019 - Volume 1 - PROCEEDINGS / Popov, Georgi ; Stavrev, Dimitar (ur.).
Sofija: Scientific technical union of mechanical engineering “Industry-4.0”, 2019. str. 51-54 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada hightechsociety.eu hightechsociety.eu

956.

Mrzljak, Vedran; Poljak, Igor; Orović, Josip; Prpić-Oršić, Jasna

Influence of the ambient temperature change on steam pressure reduction valve exergy destruction and exergy efficiency // INTERNATIONAL SCIENTIFIC CONFERENCE MACHINES. TECHNOLOGIES. MATERIALS 2019 - winter session - Volume 1 - PROCEEDINGS / Popov, Georgi ; Dikova, Tsanka (ur.).
Sofija: Scientific technical union of mechanical engineering “Industry-4.0”, 2019. str. 26-29 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada mtmcongress.com mtmcongress.com

957.

Mrzljak, Vedran; Poljak, Igor; Prpić-Oršić, Jasna

Numerical analysis of turbo-generator steam turbine energy efficiency and energy power losses change during the variation in developed power // INTERNATIONAL SCIENTIFIC CONFERENCE MACHINES. TECHNOLOGIES. MATERIALS 2019 - winter session - Volume 1 - PROCEEDINGS / Popov, Georgi ; Dikova, Tsanka (ur.).
Sofija: Scientific technical union of mechanical engineering “Industry-4.0”, 2019. str. 22-25 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada mtmcongress.com mtmcongress.com

958.

Osman, Krešimir; Jankovich, Dennis

An Approach to the Mechanical Design Projects in the Field of Cooling Plants // Proceedings of 25th International Symposium Interklima 2019, 14th Conference on Thermography, Zagreb, Croatia / Dović, Damir ; Soldo, Vladimir ; Mudrinić, Saša (ur.).
Zagreb: University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture Ivana Lucica 5, 10 000 Zagreb, 2019. str. 1-10 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

www.fsb.unizg.hr

959.

Pavletić, Duško; Randić, Miroslav

Effect of Welding Parameters on Weld Quality for High-Strength Steel Used at Low Temperature (EH36) // The 4th International Symposium of Maritime Sciences / Uchida, Makoto (ur.).
Kobe: Kobe University, 2019. str. 4-4 (pozvano predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

960.

Brnić, Josip; Vukelić, Goran

Experimental determination of material mechanical properties and modeling of material behaviour in special environmental conditions // Proceedings of the 6th. European Conference on Computational Mechanics (Solids, Structures and Coupled Problems) ECCM 6 and 7th. European Conference on Computational Fluid Dynamics ECFD 7 / Owen, Roger ; de Borst, Rene ; Reese, Jason ; Pearce, Chris (ur.).
Barcelona: International Center for Numerical Methods in Engineerin (CIMNE), 2019. str. 4361-4367 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

www.eccm-ecfd2018.org www.eccm-ecfd2018.org

961.

Vukelić, Goran; Brnić, Josip

Using experimental and numerical characterization in comparing marine exhaust system stainless steels // Proceedings of the 6th. European Conference on Computational Mechanics (Solids, Structures and Coupled Problems) ECCM 6 and 7th. European Conference on Computational Fluid Dynamics ECFD 7 / Owen, Roger ; de Borst, Rene ; Reese, Jason ; Pearce, Chris (ur.).
Barcelona: International Center for Numerical Methods in Engineerin (CIMNE), 2019. str. 4423-4431 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

www.eccm-ecfd2018.org www.eccm-ecfd2018.org

962.

Braut, Sanjin; Žigulić, Roberto; Štimac Rončević, Goranka; Skoblar, Ante; Mirković, Mihajlo; Bulić, Neven

Rotor-stator partial rub detection based on Teager-Huang transform // Proceedings of the 10th International Conference on Rotor Dynamics – IFToMM / Lucchesi Cavalca, Katia ; Weber, Hans Ingo (ur.).
Rio de Janeiro: Springer, 2019. str. 252-264 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

963.

Uroić, Tessa; Jasak, Hrvoje; Rusche, Henrik

Implicitly coupled pressure-velocity solver // OpenFOAM Selected papers of the 11th Workshop / Nobrega, Miguel ; Jasak, Hrvoje (ur.).
Cham: Springer, 2019. str. 249-268 doi:10.1007/978-3-319-60846-4 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

doi

964.

Mustapić, Nenad

Analiza razvoja sustava gospodarenja komunalnim otpadom u Republici Hrvatskoj i prijedlozi mjera za povećanje učinkovitosti sustava // Zbornik radova: 7. međunarodni stručno-znanstveni skup "Zaštita na radu i zaštita zdravlja" / Kirin, Snježana (ur.).
Karlovac: Veleučilište u Karlovcu, 2018. str. 51-65 (pozvano predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

965.

Bauer, Branko; Mihalic Pokopec, Ivana; Mance, Ines; Marasović, Ivan; Crnobrnja, Boris

ISPITIVANJE SKLONOSTI ALUMINIJSKIH LEGURA TOPLIM PUKOTINAMA METODOM LIJEVANJA PRSTENOVA // 17th INTERNATIONAL FOUNDRYMEN CONFERENCE
Opatija, Hrvatska, 2018. str. 89-97 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

966.

Klobčar, Damjan; Bračun, Drago; Soković, Mirko; Bušić, Matija; Baloš, Sebastijan; Pleterski, Matej

Important findings in Wire + Arc Additive Manufacturing // Safe Welded Construction by High Quaility Welding / Grabulov, Vencislav (ur.).
Beograd: Serbian Welding Society - DUZS Srbija, 2018. str. 1-5 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

967.

Divjak, Alan; Kovačić, Ines; Modrić, Damir

3D MODELIRANJE I 3D TISAK UMJETNOG KOŠTANOG TKIVA // Printing&Design18
Zagreb, Hrvatska, 2018. str. 74-83 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

www.tiskarstvo.net

968.

Šimunović, Jakov; Barbir, Frano

Small-scale renewable energy hydrogen system: Case study // 9th International Conference on Hydrogen Production (ICH2P-2018) / Nižetić, Sandro (ur.).
Zagreb, 2018. str. 1-5 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

969.

Briševac, Debora; Ćurković, Lidija; Sever, Ivana

Karakterizacija Al2O3 suspenzija stabiliziranih polielektrolitnim disperzantom // Proceedings of 1st International Students GREEN Conference
Osijek, Hrvatska, 2018. str. 120-128 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

970.

Burić, Mladen; Marjanović, Dorian

A TOOL FOR IDEALISATION OF CAD MODELS // 15th International Design Conference (DESIGN 2018)
Dubrovnik, Hrvatska, 2018. str. 205-214 doi:10.21278/idc.2018.0367 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

doi

971.

Sever, Ivana; Ćurković, Lidija; Žmak, Irena

Sintering of Slip Cast Composite Al2O3- ZrO2 Ceramics // Proceedings of TEAM 2018 ; 9th International Scientific and Expert Conference / Lalić, Bojan ; Tasić, Nemanja ; Gračanin, Danijela (ur.).
Novi Sad: University of Novi Sad, Faculty of Technical Sciences, 2018. str. 99-104 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

972.

Štefanić, Nedeljko; Brnadić, Tomislav; Gregurić, Petar

Organizational Changes in Manufacturing Companies Under the Conditions of Industry 4.0 // Book of Proceedings of 3rd International Scientific Conference LEAN Spring Summit 2018
Opatija, Hrvatska, 2018. str. 110-120 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

973.

Petrak, Antonio; Landek, Darko

Povišenje otpornosti na trošenje prstena kliznog ležaja nitriranjem // Proceedings of the international conference MATRIB 2018 / Šnajder Musa, Matea ; Sakoman, Matija (ur.).
Zagreb: HDMT - Hrvatsko društvo za materijale i tribologiju, 2018. str. 187-194 (predavanje, domaća recenzija, cjeloviti rad (in extenso), znanstveni)

974.

Macura, Vladimir; Landek, Darko

Korozijska postojanost PACVD prevlaka na alatnim čelicima za topli rad // Proceedings of the international conference MATRIB 2018 / Šnajdar Musa, Matea ; Sakoman, Matija (ur.).
Zagreb: HDMT-Hrvatsko društvo za materijale i tribologiju, 2018. str. 122-131 (predavanje, domaća recenzija, cjeloviti rad (in extenso), znanstveni)

975.

Jurković, Dragan; Kaić, Nikolina; Banaj, Anamarija; Banaj, Đuro

Utjecaj načina sjetve na prinos zrna kukuruza // 53. hrvatski i 13. međunarodni simpozij agronoma / Vlatka Rozman, Zvonko Antunović (ur.).
Osijek, 2018. str. 299-303 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

976.

Ranilović, Borjan; Filipović, Petar; Dović, Damir; Horvat, Ivan

APPLICATION OF RAY TRACING ANALYSIS IN THE DESIGN OF COMPLEX FLAT PLATE COLLECTORS // Digital proceedings 13th SDEWES Conference Palermo 2018
Palermo, Italija, 2018. 0329-1, 12 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

977.

Skračič, Tomislav; Denc, Jowita; Denc Maciej

Maritime English Teachers and Marine Engineer Officers – Finding the Middle Ground // Proceedings of ICTS 2018, 18th International Conference on Transport Science, Portorož, Slovenia / Zanne, Marina (ur.).
Portorož, 2018. str. 329-333 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

978.

Žiga, Alma; Cogo, Zlatan; Kačmarčik, Josip

Out-Of-Plane Deflection Of J-Shaped Beam // Proceedings of 21 st International Research/Expert Conference ”Trends in the Development of Machinery and Associated Technology”, TMT 2018 / Ekinović, Sabahudin ; Corral, Irene Buj ; Yalcin, Senay (ur.).
Zenica: University of Zenica, Faculty of Mechanical Engineering, 2018. str. 269-272 (poster, recenziran, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada www.tmt.unze.ba

979.

Kacmarcik, Josip; Spahic, Denis; Varda, Kenan; Porca, Ernadin; Zaimovic-Uzunovic, Nermina

An investigation of geometrical accuracy of desktop 3D printers using CMM // IOP Conference Series: Materials Science and Engineering 393, The 10th International Symposium Machine and Industrial Design in Mechanical Engineering (KOD 2018) / Rackov, Milan ; Mitrović, Radivoje (ur.).
Novi Sad, Srbija: IOP Publishing Ltd, 2018. 012085, 9 doi:10.1088/1757-899x/393/1/012085 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

doi iopscience.iop.org

980.

VULIĆ, Nenad; ŠULJIĆ, Igor; ŠULJIĆ, Ivor

Comparison of IACS Classification Societies Propeller Strength Calculations // 18th International Conference on Transport Science (ICTS 2018), June 14th-15th 2018, Conference Proceedings / ZANNE, Marina ; (ur.).
Portorož: Fakulteta za pomorstvo in promet, 2018. str. 409-415 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

981.

Stoić, Antun; Stojkov, Marinko; Samardžić, Ivan; Duspara, Miroslav

Energy Efficiency in Machine Tool // Proceedings of International Conference on Smart Systems and Technologies 2018 (SST 2018) / Žagar, Drago ; Martinović, Goran ; Rimac Drlje, Snježana ; Galić, Irena (ur.).
Osijek: Faculty of Electrical Engineering, Computer Science and Information Technology Osijek, Josip Juraj Strossmayer University of Osijek Osijek, Croatia, 2018. str. 55-58 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

982.

Cvijetić, Gregor; Jasak, Hrvoje

The Compressible Harmonic Balance Method for Turbomachinery // AIAA Aerospace Sciences Meeting 2018
Kissimmee (FL), Sjedinjene Američke Države: American Institute of Aeronautics and Astronautics, 2018. str. 1-9 doi:10.2514/6.2018-0833 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

doi

983.

Pigazzini, Riccardo; Puzzer, Thomas; Martini, Simone; Morgut, Mitja; Contento, Giorgio; Gatin, Inno; Vukčević, Vuko; Jasak, Hrvoje; Begovich, Ermina; Caldarella, Sebastiano et al.

Experimental and Numerical Prediction of the Hydrodynamic Performances of a 65 ft Planing Hull in Calm Water // Technology and Science for the Ships of the Future - Proceedings of NAV 2018: 19th International Conference on Ship and Maritime Research
Trst, Italija, 2018. str. 480-487 doi:10.3233/978-1-61499-870-9-480 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

doi

984.

Kekez, Krešimir; Stojanović, Ivan; Šimunović, Vinko

Rehabilitation of water heater tanks with advanced cathodic protection // Applied Science with constant Awareness / Królikowska, Agnieszka (ur.).
Krakov: Polish Corrosion Society, EFC, DECHEMA, 2018. str. 1-9 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

985.

Jakovljević, Suzana; Grilec, Krešimir, Primorac, Ivan; Hržina Matija

Klizno trošenje dentalnog polimera ojačanog morskim školjkama // Zbornik sažetaka International conferance MATRIB 2018, materials, triboloy, recycling / Šnajdar Musa, Mateja ; Sakoman, Matija (ur.).
Zagreb: Hrvatsko društvo za materijale i tribologiju (HDMT), 2018. str. 27-35 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

986.

Lozina, Zeljan; Sedlar, Damir; Bartulovic, Andjela

Integration schemes for the transient dynamics of nonlinear cable structures // 6th European Conference on Computational Mechanics (ECCM 2018) ; 7th European Conference on Computational Fluid Dynamics (ECFD 2018)
Glasgow, Ujedinjeno Kraljevstvo, 2018. 1221, 10 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

eccm-ecfd2018.org

987.

Brnadić, Tomislav; Štefanić, Nedeljko; Brozović, Marijan

Predictive Maintenance 4.0 // 3rd International Scientific Conference LEAN SPRING SUMMIT 2018
Opatija, Hrvatska, 2018. str. 72-76 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

988.

Falkoni, Anamarija; Krajačić, Goran

Standard vs. fast charging of electric vehicles in self-sufficient wider urban areas // Digital proceeding of 3rd South east European conference on sustainable development of energy, water and environment systems
Novi Sad, Srbija, 2018. 0024, 17 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

989.

Hoster, Josip; Vreš, Marko

Sigurnost stupova s geometrijskim nesavršenostima u okvirnim konstrukcijama // VII. međunarodni stručno-znanstveni skup ZAŠTITA NA RADU I ZAŠTITA ZDRAVLJA / Kirin, S. (ur.).
Karlovac: Ve, 2018. str. 338-343 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

990.

Grizelj, Branko; Grizelj, Dejan; Šolto Grizelj, Vilma

Bending i two stages // 16. SKUP O PRIRODNOM PLINU, TOPLINI I VODI 16th NATURAL GAS, HEAT AND WATER CONFERENCE 9. MEĐUNARODNI SKUP O PRIRODNOM PLINU, TOPLINI I VODI 9th INTERNATIONAL NATURAL GAS, HEAT AND WATER CONFERENCE / Pero RAOS, glavni urednik Tomislav GALETA Dražan KOZAK Marija RAOS Josip STOJŠIĆ Zlatko TONKOVIĆ (ur.).
Osijek: J. J. Strossmayer University of Osijek Mechanical Engineering Faculty in Slavonski Brod HR-35000 Slavonski Brod, Trg I. B. Mažuranić 2 University of Pécs Faculty of Engineering and Information Technology H-7624 Pécs, Boszorkány u. 2, 2018. str. 262-271 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

991.

Bilušić, Martin; Runje, Biserka

THE INFLUENCE OF COATING ON THE ACCURACY OF THE OPTICAL 3D MEASUREMENT SYSTEM // 23rd International conference of materials protection and industrial finish KORMAT 2018 / Stojanović, Ivan ; Šimunović, Vinko ; Runje, Biserka (ur.).
Zagreb: Hrvatsko društvo za zaštitu materijala (HDZaMa), 2018. str. 155-161 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

992.

Tošić, Marina; Lisjak, Dragutin; Kolar, Davor; Špehar, Silvestar

DETERMINING CRITICAL AIRCRAFT SPARE PARTS USING TEXT MINING AND ASSOCIATION RULE MINING TECHNIQUES // ICIL 2018 Conference Proceedings / Sinuany-Stern, Zilla ; Cohen, Yuval (ur.).
Beersheba: Ben-Gurion University, 2018. str. 194-201 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

993.

Filipović, Petar; Horvat, Ivan; Dović, Damir

Determining the Thermal Efficiency of a Polymer Solar Collector Using Numerical Methods // Digital proceedings 13th SDEWES Conference
Palermo: Marko Ban i ostali, 2018. 271, 806 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

994.

Horvat, Ivan; Dović, Damir; Filipović, Petar

Laboratory testing of Domestic Hot Water Boiler while fired with different Biomass Pellets // Digital proceedings of 13th Conference on sustainable development of energy, water and enviroment systems
Palermo: Marko Ban i ostali, 2018. 304, 806 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

995.

Dodig, Dino; Matulić, Nikola; Šantić, Toni; Radica, Gojmir

CFD Simulation for the Knock Analysis in the Internal Combustion Engine // 2018 3rd International Conference on Smart and Sustainable Technologies / Perković, Toni ; Milanović, Željka ; Vukojević, Katarina ; Rodrigues, Joel (ur.).
Piscataway (NJ): Institute of Electrical and Electronics Engineers (IEEE), 2018. 18060884, 6 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

ieeexplore.ieee.org

996.

Muše, Ante; Radica, Gojmir; Matulić, Nikola; Račić, Nikola

SIMULATION OF FUEL AND EMISSION BENEFIT ON RANDOM SHIP VOYAGE BY POWERING THE AUXILIARY CONSUMERS WITH PEM FUEL CELL // 23rd Symposium on the Theory and Practice of Shipbuilding, SORTA 2018, Book of proceeding / Blagojević, Branko ; Ljubenkov, Boris (ur.).
Split: Fakultet elektrotehnike, strojarstva i brodogradnje Sveučilišta u Splitu, 2018. str. 370-381 (predavanje, domaća recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

997.

Matulic, Nikola; Radica, Gojmir; Racic, Nikola

SIMULATION OF FUEL AND EMISSION BENEFIT ON RANDOM SHIP VOYAGE BY POWERING THE AUXILIARY // CTS 2018, MARITIME, TRANSPORT AND LOGISTICS SCIENCE Conference proceedings / anne, Marina ; Bajec, Patricija Bajec ; Vidan, Pero ; Krčum, Maja (ur.).
Portorož: Faculty of Maritime Studies and Transport, 2018. str. 1-7 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

998.

Cvitanić, Vedrana; Džoja, Maja

Comparison of full and simple approach under non-associated flow rule for an evolutionary anisotropic model // Proceedings of the 9th International Congress of Croatian Society of Mechanics / Marović, Pavao ; Krstulović-Opara, Lovre ; Galić, Mirela (ur.).
Split: Croatian Society of Mechanics, Faculty of Mechanical Engineering and Naval Architecture, University of Zagreb, 2018. str. 1-16 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

999.

Fabjanac, Ivo; Penga, Željko; Radica, Gojmir; Nižetić, Sandro

Computational fluid dynamics analysis and optimization of residential building air conditioning // MTSM2018
Split, Hrvatska, 2018. str. pdf-pdf (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1000.

Jurčević, Mišo; Penga, Željko; Klarin, Branko; Nižetić, Sandro

Numerical analysis and experimental validation of transient heat transfer during solidification/melting inside an insulated tank // MTSM2018
Split, Hrvatska, 2018. str. pdf-pdf (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1001.

Geci, Antonio; Penga, Željko; Radica, Gojmir; Nižetić, Sandro

Computational fluid dynamics analysis and improvement of manifold design for plate type heat exchangers // MTSM2018
Split, Hrvatska, 2018. str. pdf-pdf (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1002.

Mihaljević, Morana; Cajner, Hrvoje; Markučič, Damir; Kožić, Karlo

COATING INFLUENCE ON ULTRASONIC THICKNESS MEASUREMENT RESULT // Proceedings of 29th DAAAM International Symposium / Katalinić, Branko (ur.).
Zadar: DAAAM International Vienna, 2018. str. 0341-0346 doi:10.2507/29th.daaam.proceedings.049 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

doi

1003.

Frančeski, Joško; Skozrit, Ivica; Lesičar, Tomislav; Sorić, Jurica

A New Finite Element for Higher Order Continuum Theory // Proceedings of the 9th International Congress of Croatian Society of Mechanics / Marović, Pavo ; Krstulović-Opara, Lovre ; Galić, Mirela (ur.).
Split: HDM, 2018. str. 1-6 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1004.

Soldo, Jure; Škugor, Branimir; Deur, Joško

Optimal Energy Management and Shift Scheduling Control of a Parallel Plug in Hybrid Electric Vehicle // PMC2018 PROCEEDINGS
Loughborough, Ujedinjeno Kraljevstvo, 2018. PMC-115, 22 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1005.

Sakoman, Matija; Ćorić, Danko; Renić, Božo

Experimental Study of Indentation Fracture Toughness in Nanostructured Cemented Carbides // Abstracts Book and Proceedings on USB of International Conference on Materials, Tribology, Recycling, MATRIB 2018 / Šnajdar Musa, Mateja ; Sakoman, Matija (ur.).
Zagreb: Hrvatsko društvo za materijale i tribologiju (HDMT), 2018. str. 282-291 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1006.

Wang, Xuebin; Jin, Qiming; Wang, Liang; Bai, Shengjie; Mikulčić, Hrvoje; Vujanović, Milan; Tan, Houzhang; Ruan, Renhui

Synergistic effects of biomass and polyurethane plastic co-pyrolysis on the soot formation at high temperatures // Digital Proceedings of 13th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES / Ban, Marko (ur.).
Zagreb: Fakultet strojarstva i brodogradnje Sveučilišta u Zagrebu, 2018. SDEWES2018.0491, 16 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1007.

Zhang, Jiaye; Bai, Shengjie; Wang, Xuebin; Mikulčić, Hrvoje; Zhou, Yuegui; Tan, Houzhang; Vujanović, Milan; Liu, Hexin

Numerical investigation of co-firing biomass under oxy-MILD combustion // SDEWES2018.0477 / Ban, Marko (ur.).
Zagreb: Fakultet strojarstva i brodogradnje Sveučilišta u Zagrebu, 2018. SDEWES2018.0477, 11 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1008.

Stančin, Hrvoje; Růžičková, Jana; Mikulčić, Hrvoje; Raclavska, Helena; Kucbel, Marek; Duić, Neven

The utilization possibilities of waste polyurethane from household appliances // Digital Proceedings of 13th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES / Ban, Marko (ur.).
Zagreb: Fakultet strojarstva i brodogradnje Sveučilišta u Zagrebu, 2018. SDEWES2018.0423, 17 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1009.

Burić, Melita; Grgurić, Sanja; Gašparac, Goran; Mikulčić, Hrvoje; Duić, Neven

A numerical investigation of wave and tidal current energy resource potential in the strait of Novsko ždrilo // Digital Proceedings of 13th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES / Ban, Marko (ur.).
Zagreb: Fakultet strojarstva i brodogradnje Sveučilišta u Zagrebu, 2018. SDEWES2018.0318, 11 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1010.

Bai, Shengjie; Li, Guangwen; Zhang, Jiaye; Zhang, Lan; Vujanović, Milan; Mikulčić, Hrvoje; Wang, Xuebin; Tan, Houzhang

Experimental study on the particulate matter emission from the combustion of upgrade lignite // Digital Proceedings of the 3rd South East European Conference on Sustainable Development of Energy, Water and Environment Systems - 3rd SEE SDEWES / Ban, Marko (ur.).
Zagreb: Fakultet strojarstva i brodogradnje Sveučilišta u Zagrebu, 2018. SEE.SDEWES2018.0016, 16 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1011.

Zhang, Jiaye; Bai, Shengjie; Liu, Zihan; Zhu, Lihua; Mikulčić, Hrvoje; Wang, Xuebin; Vujanović, Milan; Tan, Houzhang

Experimental study on the ash transformation during pressurized oxy-biomass combustion // Digital Proceedings of the 3rd South East European Conference on Sustainable Development of Energy, Water and Environment Systems - 3rd SEE SDEWES / Ban, Marko (ur.). (ur.).
Zagreb: Fakultet strojarstva i brodogradnje Sveučilišta u Zagrebu, 2018. SEE.SDEWES2018.0014, 9 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1012.

Briševac, Debora; Stojanović, Ivan

Dupleks sustav zaštite prevlakama // MATRIB 2018 / Šnajdar Musa, Mateja ; Sakoman, Matija (ur.).
Zagreb: Hrvatsko društvo za materijale i tribologiju (HDMT), 2018. str. 292-302 (predavanje, domaća recenzija, cjeloviti rad (in extenso), znanstveni)

1013.

Havrlišan, Sara; Šimunović, Katica; Vukelić, Đorđe; Šarić, Tomislav; Šimunović, Goran

Istraživanje uticaja parametra naštrcavanja na tvrdoću prevlake // ETIKUM 2018 PROCEEDINGS / Agarski, Boris (ur.).
Novi Sad: Faculty of Technical Sciences, Department of Production Engineering, 2018. str. 25-28 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

www.dpm.ftn.uns.ac.rs

1014.

Švaco, Marko; Jerbić, Bojan; Župančić, Ivan; Vitez, Nikola; Šekoranja, Bojan; Šuligoj, Filip; Vidaković, Josip

The Case of Industrial Robotics in Croatia // Advances in Service and Industrial Robotics. RAAD 2018. Mechanisms and Machine Science, vol 67. / Aspragathos, N. ; Koustoumpardis, P ; , Moulianitis, V (ur.).
Cham: Springer, 2018. str. 607-617 doi:10.1007/978-3-030-00232-9_64 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

doi link.springer.com

1015.

Švaco, Marko; Jerbić, Bojan; Polančec, Mateo; Šuligoj, Filip

A Reinforcement Learning Based Algorithm for Robot Action Planning // Advances in Service and Industrial Robotics. RAAD 2018. Mechanisms and Machine Science, vol 67. / Aspragathos, N. ; Koustoumpardis, P ; , Moulianitis, V (ur.).
Cham: Springer, 2018. str. 493-503 doi:10.1007/978-3-030-00232-9_52 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

doi link.springer.com

1016.

Bota, Josip; Brozović, Maja; Kovačević, Dorotea; Dolić, Jurica

The effects of ecological properties on the assessment of paperboard for packaging // Abstracts Book and Proceedings on USB of International Conference on Materials, Tribology, Recycling, MATRIB 2018 / Šnajdar Musa, Mateja ; Sakoman, Matija (ur.).
Zagreb: Hrvatsko društvo za materijale i tribologiju (HDMT), 2018. str. 35-41 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada hdmt.hr hdmt.hr

1017.

Takakuwa, Soemon; Veža, Ivica; Čelar, Stipe

“INDUSTRY 4.0” IN EUROPE AND EAST ASIA // Proceedings of the 29th DAAAM International Symposium / Katalinić, Branko (ur.).
Beč: DAAAM International Vienna, 2018. str. 61-69 doi:10.2507/29th.daaam.proceedings.009 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada doi

1018.

Erdogan Anil; Kizilkan, Onder; Can Ozgur, Colpan; Nizetic, Sandro

Performance investigation of a solar tower assisted CO2 gas cycle with integrated ORC // PROCEEDINGS OF 7th GLOBAL CONFERENCE on GLOBAL WARMING
Izmir, 2018. str. 573-578 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1019.

Vukšić, Milan; Žmak, Irena; Ćurković, Lidija

Composition optimization of alumina suspensions which contain waste alumina powder // Annals of DAAAM and Proceedings of the International DAAAM Symposium / Katalinic, Branko (ur.).
Beč: DAAAM International Vienna, 2018. str. 1019-1025 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1020.

Švagelj, Zrinka; Ćurković, Lidija; Mandić, Vilko; Rede, Vera; Bušetinčan, Božidar

Preparation of Alumina Foams by the Polyurethane Sponge Replica Method // Proceedings of TEAM 2018 ; 9th International Scientific and Expert Conference / Lalić, Bojan ; Tasić, Nemanja ; Gračanin, Danijela (ur.).
Novi Sad, 2018. str. 110-116 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1021.

Pivac, Nikolina; Nižetić, Sandro; Zanki, Vlasta; Papadopoulos, Agis M.

Field research on occupants behavior related to energy consumption in Mediterranean area // Proccedings of 49th International HVAC&rcongress and Exibition / Todorović Branislav (ur.).
Beograd: Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije (SMEITS), 2018. str. 43-48 doi:10.24094/kghk.018.49.1.43 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

doi

1022.

Marinić-Kragić, Ivo; Vučina, Damir

Reduction of Shape Variables in B-Spline Based Optimization by Implementation of Analytical Shapes // EngOpt 2018 Proceedings of the 6th International Conference on Engineering Optimization / Rodrigues, HC (ur.).
Lisabon: Springer, 2018. str. 453-465 doi:10.1007/978-3-319-97773-7 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

doi

1023.

Gajšek, Brigita; Cajner, Hrvoje; Đukić, Goran; Opetuk, Tihomir; Lukač, Bepo; Puškadija, Nikola

Ergonomics for productivity in order-picking processes for aging workforce // Book of Proceedings of the 7th International Ergonomics Conference ERGONOMICS 2018 – Emphasis on Wellbeing / Sumpor, Davor ; Salopek Čubrić, Ivana ; Jurčević Lulić, Tanja ; Čubrić, Goran (ur.).
Zagreb: Hrvatsko ergonomijsko društvo, 2018. str. 109-118 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1024.

Đukić, Goran; Rose, Lukas; Gajšek, Brigita; Opetuk, Tihomir; Cajner, Hrvoje

Space, time and ergonomic assessment of order- picking using vertical lift modules // ICIL 2018 Conference Proceedings / Zilla, Sinuany-Stern ; Yuval, Cohen (ur.).
Beersheba: Ben-Gurion University, Israel, 2018. str. 68-74 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1025.

Gjeldum, Nikola; Mladineo, Marko; Crnjac, Marina; Aljinovic, Amanda

APPLICATION OF THE INTEGRATIVE PROCEDURE FOR MANAGEMENT OF PRODUCTION AND SERVICE IMPROVEMENT PROCESS ON THE ASSEMBLY LINE // 29th DAAAM International Symposium
Zadar, Hrvatska, 2018. str. 30-40 doi:10.2507/29th.daaam.proceedings.005 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

doi www.daaam.info

1026.

Gjeldum, Nikola; Mladineo, Marko; Crnjac, Marina; Aljinovic, Amanda; Stojkic, Zeljko; Bosnjak, Igor

Industry 4.0-based improvement of the Lean game by using the innovative decision support system // Proceedings of the Fifth European Lean Conference (ELEC 2018) "Lean Educator's Role in Lean Development"
Braga, Portugal, 2018. str. 161-170 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

www.elec2018.pt

1027.

Keran, Zdenka; Mihaljević, Morana; Horvatić Novak, Amalija; Runje, Biserka

The impact of the grain size on the ultrasound velocity in the material // Proceedings KORMAT 2018 / Stojanović, Ivan ; Šimunović, Vinko ; Runje Biserka (ur.).
Zagreb: Hrvatsko društvo za zaštitu materijala (HDZaMa), 2018. str. 41-47 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1028.

Braut, Sanjin; Žigulić, Roberto; Skoblar, Ante; Štimac Rončević, Goranka

Fault detection based on instantaneous angular speed measurement and variational mode decomposition // MATEC Web of Conferences 211, 18006 (2018), VETOMAC XIV / Maia, Nuno ; Dimitrovová, Zuzana (ur.).
Lisabon: EDP Sciences, 2018. str. 1-6 doi:10.1051/matecconf/201821118006 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

doi www.matec-conferences.org www.matec-conferences.org

1029.

Kozarac, Darko; Taritaš, I; Sjerić, Momir; Krajnović, Josip; Sremec, Mario

The Optimization of the Dual Fuel Engine Injection Parameters by Using a Newly Developed Quasi-Dimensional Cycle Simulation Combustion Model // SAE Technical Papers
Detroit (MI): SAE International, 2018. 2018-01-0261, 19 doi:10.4271/2018-01-0261 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

doi www.sae.org

1030.

Karakašić, Mirko; Kljajin, Milan; Duhovnik, Jože; Glavaš, Hrvoje

APPLICATION OF MFF METHOD IN CONCEPTUAL DESIGN // VIII International Conference Industrial Engineering and Environmental Protection 2018 (IIZS 2018) ProceedingsZrenjanin : University of Novi Sad Technical faculty “Mihajlo Pupin” Zrenjanin, Republic of Serbia
Zrenjanin: Technical faculty “Mihajlo Pupin”, Zrenjanin, University of Novi Sad, 2018. str. 72-80 (pozvano predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

1031.

Mikulić, Iva; Štefanić, Anja

The Adoption of Modern Technology Specific to Industry 4.0 by Human Factor // DAAAM Proceedings 29th DAAAM International Symposium
Zadar, Hrvatska, 2018. str. 0941-0946 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1032.

Zeba, Gordana; Čičak, Mirjana; Dabić, Marina

The role of RFID technology in the Intelligent Manufacturing // III International Scientific Conference Winter Session - Industry 4.0 / Popov, Georgi ; Ovtcharova, Jivka (ur.).
Sofija: Scientific-Technical Union of Mechanical Engineering “Industry 4.0”, 2018. str. 226-229 (plenarno, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1033.

Stefanović-Marinović, Jelena; Troha, Sanjin; Anđelković, Boban; Milovančević, Miloš; Rončević, Branimir

Selection of the Appropriate Reversible Two-Carrier Planetary Gear Train // 4th International Conference Mechanical Engineering in XXI Century
Niš, 2018. str. 173-178 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1034.

Mrzljak, Vedran; Perčić, Gregor; Prpić-Oršić, Jasna

GAS TURBINE UPGRADE WITH HEAT REGENERATOR - NUMERICAL ANALYSIS OF ADVANTAGES AND DISADVANTAGES // Third International Scientific Conference-Winter Session-"Industry 4.0 2018" - PROCEEDINGS / Popov, Georgi ; Ovtcharova, Jivka (ur.).
Sofija: Scientific technical union of mechanical engineering “Industry-4.0”, 2018. str. 184-187 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada industry-4.eu industry-4.eu

1035.

Hoić, Matija; Hrgetić, Mario; Deur, Joško; Tissot, Andreas

Design of a test rig in support of E-clutch dynamics characterization, modelling, and control // 4th Biennial International Conference on Powertrain Modelling and Control, Testing, Mapping and Calibration PMC 2018 / Ebrahimi, K M (ur.).
Loughborough: Loughborough University, 2018. str. 1-17 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1036.

Rastija, Marko; Vučković, Krešimir; Risović, Stjepan

Parametarsko modeliranje cilindričnog zupčanika s evolventnim ozubljenjem // Proceedings of the 4th International scientific conference ”Conference on Mechanical Engineering Technologies and Applications” COMETa2018 / Golubović, Dušan ; Košarac, Aleksandra ; Jeremić, Dejan (ur.). - Istočno Sarajevo, BiH : University of East Sarajevo Faculty of Mechanical Engineering East Sarajevo, 2018. 478-485 (ISBN 978-99976-719-4- 3)
Istočno Sarajevo, Bosna i Hercegovina; Jahorina, Bosna i Hercegovina, 2018. str. 478-485 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1037.

Salopek, Goran; Dunđer, Marko; Samardžić, Ivan

Optimization of Welding Parameters in Robotics Hard-surfacing Process of AISI 316 Substrate with Durmat OA Using Genetics Algorithm // IIW SOUTH-EAST EUROPEAN WELDING CONGRESS
Beograd, Srbija, 2018. str. 151-157 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1038.

Aleksandrov Fabijanić, Tamara; Sakoman, Matija; Kurtela, Marin; Marciuš, Marijan

Electrochemical corrosion resistance of nanostructured hardmetals in acid media // Proceeding of Euro PM2018 Congress & Exhibition
Shrewsbury: EPMA, 2018. str. - (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1039.

Gljušćić, Petar; Zelenika, Saša; Kamenar, Ervin

Characterisation of Performances of Thermoelectric Generators for Energy Harvesting Applications // Proceedings of the 29th DAAAM International Symposium / Katalinić, B. (ur.).
Beč: DAAAM International Vienna, 2018. str. 25-30 doi:10.2507/29th.daaam.proceedings.004 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

doi www.daaam.info

1040.

Arrigoni, Tea; Zelenika, Saša; Kamenar, Ervin; Schnurrer-Luke-Vrbanić, Tea

Design of the Prototype of a Full Arm Mechatronics Rehabilitation Device // Proceedings of the 29th DAAAM International Symposium / Katalinić, B. (ur.).
Beč: DAAAM International Vienna, 2018. str. 16-24 doi:10.2507/29th.daaam.proceedings.003 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

doi www.daaam.info

1041.

Gljušćić, Petar; Zelenika, Saša

Coupled Electromechanical Numerical Modelling of Piezoelectric Vibration Energy Harvesters // Proceedings of the 29th DAAAM International Symposium / Katalinić, B. (ur.).
Beč: DAAAM International Vienna, 2018. str. 9-15 doi:10.2507/29th.daaam.proceedings.002 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

doi www.daaam.info

1042.

Ćurković, Petar; Čehulić, Lovro

Evolutionary Planner of 3D Trajectories // 29th DAAAM International Symposium on Intelligent Manufacturing and Automation / Katalinic, Branko (ur.).
Beč: DAAAM International Vienna, 2018. str. 400-405 doi:10.2507/29th.daaam.proceedings.058 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

doi www.daaam.info

1043.

Ćurković, Petar; Mišković, Luka; Šarančić, David

Legged 3D Printed Mobile Robot // 29th DAAAM International Symposium on Intelligent Manufacturing and Automation / Katalinic, Branko (ur.).
Beč: DAAAM International Vienna, 2018. str. 394-399 doi:10.2507/29th.daaam.proceedings.057 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

doi www.daaam.info

1044.

Grizelj, Branko

Hladno oblikovanje čelika deformiranjem // Godišnji sastanak Hrvatskog mikroskopskog društva i radionica u sklopu HRZZ projekta "Istraživanje početka plastičnog toka metala kod hladne deformacije" / Zovko, Brodarec, Zdenka ; Rešković, Stoja ; Gajević, Andreja (ur.).
Sisak: Hrvatsko mikroskopsko društvo i Metalurški fakultet Sisak Sveučilište u Zagrebu, 2018. str. 1-80 (pozvano predavanje, podatak o recenziji nije dostupan, cjeloviti rad (in extenso), znanstveni)

1045.

Ćurković, Lidija; Ljubas; Davor, Čizmić; Mirta, Babić; Sandra, Sambolek; Anamarija

HIDROTERMALNA SINTEZA FOTOKATALIZATORA NA BAZI TIO2 ZA RAZGRADNJU ANTIBIOTIKA // XXII. ZNANSTVENO – STRUČNI SKUP VODA I JAVNA VODOOPSKRBA / Ujević Bošnjak, Magdalena (ur.).
Zagreb: Hrvatski zavod za javno zdravstvo (HZJZ), 2018. str. 94-100 (ostalo, domaća recenzija, cjeloviti rad (in extenso), znanstveni)

1046.

Arici, Muslum; Biligin, Feyza; Nižetić, Sandro; Papadopoulos, Agis

Effect of nanoparticle-enhanced phase change material on efficiency of photovoltaic system: A numerical investigation // 3rd International Conference on Smart and Sustainable Technologies, SpliTech 2018
Split: Fakultet elektrotehnike, strojarstva i brodogradnje Sveučilišta u Splitu, 2018. str. 1-6 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1047.

Gagliano, Antonio; Tina, Giuseppe M.; Aneli, Stefano; Nižetić, Sandro

A comparison among hybrid PV/T, PV and ST plants in a residential building facility // 3rd International Conference on Smart and Sustainable Technologies, SpliTech 2018
Split: Fakultet elektrotehnike, strojarstva i brodogradnje Sveučilišta u Splitu, 2018. str. 1-6 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1048.

Dedić-Jandrek, Hrvoje; Nižetić, Sandro; Čoko, Duje

Efficiency improvement of the photovoltaic energy conversion by application of the fins: An overview // 3rd International Conference on Smart and Sustainable Technologies, SpliTech 2018
Split: Fakultet elektrotehnike, strojarstva i brodogradnje Sveučilišta u Splitu, 2018. str. 1-6 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1049.

Nižetić, Sandro; Radica, Gojmir; Zanki, Vlasta; Lela, Branimir

Laboratory investigation of the market available biomass pellet fuels for residential applications: A Croatian case // 3rd International Conference on Smart and Sustainable Technologies, SpliTech 2018
Split: Fakultet elektrotehnike, strojarstva i brodogradnje Sveučilišta u Splitu, 2018. str. 1-3 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1050.

Symeonidou, Maria; Papadopoulos, Agis; Nižetić, Sandro

Co-generation and Micro-grids' Management: An option for sustainable urban buildings in the Mediterranean? // 3rd International Conference on Smart and Sustainable Technologies, SpliTech 2018.
Split: Fakultet elektrotehnike, strojarstva i brodogradnje Sveučilišta u Splitu, 2018. str. 1-6 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1051.

Antoniadou, Panagiota; Pivac, Nikolina; Nižetić, Sandro; Papadopoulos, Agis

Interaction of Individual Characteristics on Occupants’ Comfort Perception in cases of Office Buildings in Greece and Croatia // 6th International Conference on Renewable Energy Sources and Energy Efficiency - New Challenges / Michaelides, Ioannis (ur.).
Nikozija: University of Cyprus, 2018. str. 1828-1838 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1052.

Nižetić, Sandro; Penga, Željko; Arici, Muslum

Influence of Guide Vane Topology on the Shape and Stability of Gravitational Vortex // 3rd International Conference on Smart and Sustainable Technologies, SpliTech 2018
Piscataway (NJ): Institute of Electrical and Electronics Engineers Inc., 2018. str. 1-6 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1053.

Pivac, Nikolina; Nižetić, Sandro; Zanki, Vlasta

The Current State of Research on Thermal Comfort Prediction Models // 3rd International Conference on Smart and Sustainable Technologies, SpliTech 2018
Piscataway (NJ): Institute of Electrical and Electronics Engineers Inc., 2018. str. 1-6 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1054.

Lesičar, Tomislav; Tonković, Zdenko; Sorić, Jurica; Čanžar, Predrag

Experimental and Numerical Modeling of Heterogeneous Materials // Proceedings of 17th International Foundrymen Conference / Dolid, N. ; Zovko Brodarac, Z. ; Begid Hadžipašid, A. (ur.).
Sisak: InfOmArt, 2018. str. 44-57 (pozvano predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1055.

Magazinović, Gojko

Cargo tank heating using vertically arranged heating coils // Proceedings of the 23rd Symposium on Theory and Practice of Shipbuilding, In Memoriam prof. Leopold Sorta (SORTA 2018) / Blagojević, Branko ; Ljubenkov, Boris ; Vlak, Frane ; Klarin, Branko ; Ban, Daria ; Bašić, Josip ; Hadjina, Marko ; Degiuli, Nastia (ur.).
Split: Fakultet elektrotehnike, strojarstva i brodogradnje Sveučilišta u Splitu, 2018. str. 349-356 (predavanje, domaća recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada marjan.fesb.hr

1056.

Topić, Jakov; Maletić, Filip; Škugor, Branimir; Deur, Joško

Software Tool for Planning of City Bus Transport Electrification // International Conference on Science and Traffic Development
Opatija, Hrvatska, 2018. str. 1-14 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

1057.

Keran, Zdenka; Mihaljević, Morana; Horvatić Novak, Amalija; Runje, Biserka

NON DESTRUCTIVE TESTING OF FORGE WELDING JOINT ERRORS // Proceedings of 29th DAAAM International Symposium / Katalinić, Branko (ur.).
Zadar: DAAAM International Vienna, 2018. str. - (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1058.

Dorotić, Hrvoje; Pukšec, Tomislav

Economical, environmental and exergetic multi- objective optimization of district heating systems on hourly level for a whole year // Digital Proceedings of the 13th Conference on Sustainable Development of Energy, Water and Environment Systems / Ban, Marko (ur.).
Palermo, Italija, 2018. 219, 15 (predavanje, cjeloviti rad (in extenso), znanstveni)

1059.

Pezer, Robert; Trapić, Ivan; Sorić, Jurica

Modeling of material deformation responses using atomistic scale submodel // Proceedings of the 9th International Congress of Croatian Society of Mechanics / Marović, Pavao ; Krstulović-Opara, Lovre ; Galić, Mirela (ur.).
Split: Croatian Society of Mechanics (CSM), 2018. str. 86-86 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1060.

Runje Biserka; Horvatić Novak, Amalija; Keran, Zdenka

IMPACT OF THE QUALITY OF MEASUREMENT RESULTS ON CONFORMITY ASSESSMENT // Proceedings of the 29th DAAAM International Symposium on Intelligent Manufactoring and Automation / Katalinic, Branko (ur.).
Zadar, 2018. str. - (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1061.

Raguž, Ivan; Kozak, Dražan; Crnogorac, Krešimir; Hercog, Mladen

Designing and calibration of the system for remote strain control // Proceedings of International Conference on Smart Systems and Technologies 2018 (SST 2018) / Žagar, Drago (ur.).
Osijek: Fakultet elektrotehnike, računarstva i informacijskih tehnologija Sveučilišta Josipa Jurja Strossmayera u Osijeku, 2018. str. 73-79 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

sst-conference.org

1062.

Martinjak, Matija; Baleta, Jakov; Vujanović, Milan; Wang, Xuebin; Zeng, Min

Računalno modeliranje procesa selektivne katalitičke redukcije za smanjenje emisija NOx // Proceedings Book of the 1st International Conference the Holistic Approach to Environment / Štrkalj, Anita ; Glavaš, Zoran ; Kalambura, Sanja (ur.).
Sisak: Udruga za promicanje cjelovitog pristupa okolišu, 2018. str. 425-437 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1063.

Benković, Dajana; Vujanović, Milan; Petranović, Zvonimir

Influence Of Nozzle Flow Initialisation On Liquid Fuel Development At Early Stage Of Injection // Digital Proceedings of the 3rd SEE SDEWES Conference / Ban, Marko [et al.] (ur.).
Zagreb: SDEWES Centar, 2018. str. 1-6 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1064.

Mikulić, Dinko; Spudić, Robert; Katana, Branko

ZAŠTITA PJEŠAKA OD NALETA MOTORNIH VOZILA // 11. MEĐUNARODNA ZNANSTVENO-STRUČNA KONFERENCIJA „DANI KRIZNOG UPRAVLJANJA 2018“ / Ivan Nađ, Alen Stranjik (ur.).
Velika Gorica: Veleučilište Velika Gorica, 2018. str. 367-382 (predavanje, domaća recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

1065.

Spudić, Robert; Mikulić, Dinko

Tehnologija sprječavanja incidentnih situacija u prometu s ciljem sigurnosti zaštite pješaka // 11. međunarodna znanstveno-stručna konferencija „Dani kriznog upravljanja 2018“ / Ivan Nađ (ur.).
Velika Gorica: Veleučilište Velika Gorica, 2018. str. 357-366 (predavanje, domaća recenzija, cjeloviti rad (in extenso), znanstveni)

1066.

Marušić, Vlatko; Opačak, Ivan; Kljajić, Petar; Milinović, Andrijana; Bašić, Aleksandar

Research of the possibility of lifetime extending parts of elevator transporter exposed to tribocorrosion // Proceedings of the 18th International Conference "Research and Development in Mechanical Industry" (RaDMI-2018) / Dašić, Predrag (ur.).
Vrnjačka Banja: SaTCIP Publisher Ltd., 2018. str. 32-40 (pozvano predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1067.

Grgić, Ivan; Ivandić, Željko; Šotola, Dubravko; Kozak, Dražan; Karakašić, Mirko

Thread inspired 3D printed clamps for in vitro biomechanical testing // Proceedings of TEAM 2018 9th International Scientific and Expert Conference / Nemanja Tasić, Danijela Gračanin (ur.).
Novi Sad, 2018. str. 45-53 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada www.teamsociety.org

1068.

Prebeg, Pero; Andrić, Jerolim; Rudan, Smiljko; Jambrecic, Lea

Multiobjective ship structural optimization using surrogate models of an oil tanker crashworthiness // Marine Design XIII, Proceedings of the 13th International Marine Design Conference (IMDC 2018)
Helsinki: CRC Press, 2018. str. 459-470 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1069.

Šimunović, Vjekoslav; Kozak, Dražan; Damjanović, Darko

Numerička i eksperimentalna analiza čvrstoće plinske kartuše pri slobodnom padu // ZBORNIK RADOVA 16. SKUP O PRIRODNOM PLINU, TOPLINI I VODI 9. MEĐUNARODNI SKUP O PRIRODNOM PLINU, TOPLINI I VODI / Raos, Pero (ur.).
Osijek: Strojarski fakultet Sveučilišta u Slavonskom Brodu, 2018. str. 302-309 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

konferencija-plin.sfsb.hr

1070.

Rauch, Martina; Holik, Mario; Barac, Antun; Galović, Antun

Exergy destruction minimisation of a regenerative Brayton cycle // Proceedings of 9th International Scientific and Expert Conference TEAM 2018 / Lalić, Bojan ; Tasić, Nemanja ; Gračanin, Danijela (ur.).
Novi Sad: Faculty of Technical Sciences ; University of Novi Sad, 2018. str. 17-28 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1071.

Tuđan, Marko; Kalaica, Mia; Rozing, Goran

Recikliranje odbačenih baterija // 1st International Students’ GREEN Conference-Book of abstracts
Osijek, Hrvatska, 2018. str. 224-226 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

www.ptfos.unios.hr

1072.

Barbir, Ante; Ban, Dario; Perišić, Stipe

Classification of bivariate distribution based on EM algorithm // Proceedings of the 9th International Congress of Croatian Society of Mechanics
Zagreb: Hrvatsko društvo za mehaniku (HDM), 2018. 961486, 10 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1073.

Lozina, Željan; Sedlar, Damir; Bartulović, Anđela

The nonlinear cable structures dynamics - IGA approach // Proceedings of the 9th International Congress of Croatian Society of Mechanics / Marović, Pavao ; Krstulović-Opara, Lovre ; Galić, Mirela (ur.).
Zagreb: Hrvatsko društvo za mehaniku (HDM), 2018. str. 1-12 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1074.

Putnik, Ivan; Opačak, Ivan; Starčević, Valnea; Özkan, Turgay

Quality estimation of the boiler steel 13CrMo4-5 by the metallographic replica method // Proceedings of 9th International Scientific and Expert Conference TEAM 2018 / Lalić, Bojan (ur.).
Novi Sad: Faculty of Technical Sciences, Department of Industrial Engineering and Management, 2018. str. 1-5 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1075.

Opačak, Ivan; Marušić, Ante; Kljajić, Petar; Marušić, Vlatko

Analysis of possible tribological losses during stemming of tobacco // Proceedings of 9th International Scientific and Expert Conference TEAM 2018 / Lalić, Bojan (ur.).
Novi Sad: Faculty of Technical Sciences, Department of Industrial Engineering and Management, 2018. str. 321-325 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pregled po znanstvenom području: Strojarstvo (MB: 2.11)

Radovi u zbornicima skupova

Znanstveni radovi u zbornicima skupova