Pregled po znanstvenom području: Strojarstvo (MB: 2.11)

476.

Mrzljak, Vedran; Prpić-Oršić, Jasna; Lorencin, Ivan; Anđelić, Nikola

Exergy analysis of three cylinder steam turbine from supercritical coal-fired power plant // XXIX INTERNATIONAL SCIENTIFIC CONFERENCE trans&MOTAUTO ’21 - PROCEEDINGS / Kolev, Petar (ur.).
Sofija: Scientific technical union of mechanical engineering “Industry - 4.0”, 2021. str. 92-95 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada trans-motauto.com trans-motauto.com

477.

Iljkić, Dario; Smokvina Hanza, Sunčana; Smoljan, Božo; Pomenić, Loreta; Štic, Lovro; Liverić, Lovro

Load capacity and corrosion behavior of quenched and tempered steel 42CrMo4 and cast steel GS- 42CrMo4 // 19th International Foundrymen Conference - Humans - Valuable Resource for Foundry Industry Development
Split, Hrvatska, 2021. str. - (pozvano predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

478.

Novoselović, Daniel; Klarić, Štafanija; Cumin, Josip; Štrbac, Saša

Određivanje zaostalih naprezanja u rešetkastoj probi pomoću računalnih simulacija // PROCEEDINGS BOOK 19th INTERNATIONAL FOUNDRYMEN CONFERENCE / Dolić, Natalija ; Zovko Brodarac, Zdenka ; Brajčinović, Sandra (ur.).
Sisak: Metalurški fakultet Sveučilišta u Zagrebu, 2021. str. 421-434 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

479.

Smajić, Selver; Hajdarević, Seid; Obućina, Murčo

KLASIRANJE I KRETANJE MATERIJALA OD BUKOVOG TRUPCA DO ZAVRŠNOG PROIZVODA KROZ PRIMARNU PILANSKU PROIZVODNJU // Quality Proceedings 2021 / Brdarević, Safet ; Jašarević, Sabahudin (ur.).
Zenica: Mašinski fakultet Zenica, 2021. str. 69-75 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

quality.unze.ba quality.unze.ba

480.

Obraz, Robert

Implementing 5s Methodology in a Real-Life Production and Business System // Book of Proceedings of 6th International Scientific Conference LEAN Spring Summit 2021 / Štefanić, Nedeljko ; Hegedić, Miro (ur.).
Zagreb: Culmena d.o.o., 2021. str. 01-08 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

481.

Obraz, Robert

Employee Satisfaction with Implementing 5s Methodology // Book of Proceedings of 6th International Scientific Conference LEAN Spring Summit 2021. / Štefanić, Nedeljko ; Hegedić, Miro (ur.).
Zagreb: Culmena d.o.o., 2021. str. 31-37 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

482.

Rabar, Denis; Pavletić, Duško

Vessel’s structure fabrication process measurement – a dry-docking case // Marstruct 2011
Trondheim, 2021. 17, 9 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

483.

Mrčela, Tomislav; Dujmović Bocka, Jelena; Zadravec, Tamara

DESIGN OF A SOCIAL SYSTEM DECISION - MAKING MODEL IN CRISIS // INTERDISCIPLINARY MANAGEMENT RESEARCH XVII / Barković, Dražen ; Dernoscheg, Karl – Heinz ; Erceg, Aleksandar ; Glavaš, Jerko ; Pap, Norbert ; Runzheimer, Bodo ; Wentzel, Dirk (ur.).
Osijek: Josip Juraj Strossmayer University of Osijek, Faculty of Economics in Osijek, Croatia ; Postgraduate Doctoral Study Program in Management ; Pforzheim University, Business School, Germany ; Croatian Academy of Sciences and Arts, 2021. str. 218-239 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

imr-conference.com

484.

Bazina, Tomislav; Zelenika, Saša; Kamenar, Ervin; Škifić, Ana; Schnurrer-Luke-Vrbanić, Tea

Kinematic characterization and validation of an upper limb rehabilitation device // Proceedings of the 21st International Conference of the European Society for Precision Engineering and Nanotechnology / Leach, R. K. ; Nisbet, C. Philips, D. (ur.).
online: EUSPEN, 2021. str. 205-208 (plenarno, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

485.

Gljušćić, Petar; Zelenika, Saša; Perčić, Marko; Kamenar, Ervin

Experimental characterisation of performances of optimized piezoelectric energy harvesters // Proceedings of the 21st International Conference of the European Society for Precision Engineering and Nanotechnology / Leach, R. K. ; Nisbet, C. Philips, D. (ur.).
online: EUSPEN, 2021. str. 131-134 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

486.

Perčić, Marko; Mio, Andrea; Zelenika, Saša; Fermeglia, Maurizio

A molecular dynamics study of nanometric scale friction // Proceedings of the 21st International Conference of the European Society for Precision Engineering and Nanotechnology / Leach, R. K. ; Nisbet, C. Philips, D. (ur.).
online: EUSPEN, 2021. str. 125-126 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

487.

Perčić, Marko; Zelenika, Saša; Mezić, Igor

Multivariate AI-based predictive model of nanoscale friction // Proceedings of the 21th International Conference of the European Society for Precision Engineering and Nanotechnology / Leach, R. K. ; Nisbet, C. Philips, D. (ur.).
online: EUSPEN, 2021. str. 121-124 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

488.

Srnec Novak, Jelena; Kamenar, Ervin; Zelenika, Saša; De Bona, Francesco, Piovesana, Laura

Methodological correlation of finite element models to nanoindentation measurements on Si (100) // Proceedings of the 21th International Conference of the European Society for Precision Engineering and Nanotechnology / Leach, R. K. ; Nisbet, C. Philips, D. (ur.).
online: EUSPEN, 2021. str. 105-108 (plenarno, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

489.

Mrzljak, Vedran; Prpić-Oršić, Jasna; Medica- Viola, Vedran; Senčić Tomislav

Exergy analysis of base and optimized high pressure feed water heating system from nuclear power plant // IX International Scientific Conference TECHNICS. TECHNOLOGIES. EDUCATION. SAFETY. 2021 - PROCEEDINGS - VOLUME 1 / Tokarev, Alexander (ur.).
Sofija: Scientific technical union of mechanical engineering “Industry - 4.0”, 2021. str. 5-8 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada techtos.net techtos.net

490.

Stojanov, Željko; Dobrilovic, Dalibor; Jotanovic, Gordana; Peraković, Dragan; Jausevac, Goran; Brtka, Vladimir

Software architectures in smart manufacturing: Review and experiences // Proceedings of the 1st International Workshop on Advanced Information and Computation Technologies and Systems / Bychkov, Igor ; Stojanov, Željko ; Tchernykh, Andrei ; Feoktistov, Alexander (ur.).
online: CEUR-WS.org, 2021. str. 160-168 (radionica, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada ceur-ws.org ceur-ws.org

491.

Braut, Sanjin; Sikanen, Eerik; Nerg, Janne; Sopanen, Jussi; Božić, Željko

Fatigue life prediction of Electric RaceAbout (ERA) traction motor rotor // Procedia Structural Integrity / Bozic, Z. et al. (ur.).
Amsterdam: Elsevier science BV, 2021. str. 45-50 doi:10.1016/j.prostr.2021.03.024 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

doi www.sciencedirect.com

492.

Keser, Robert; Ceschin, Alberto; Battistoni, Michele; Im, Hong G.; Jasak, Hrvoje

Eulerian Multi-Fluid Model for Polydisperse Flows // 14th WCCM-ECCOMAS Congress 2020
Pariz, Francuska; online, 2021. str. 1-11 doi:10.23967/wccm-eccomas.2020.139 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

doi www.scipedia.com

493.

Soldo, Jure; Cvok, Ivan; Deur, Joško; Vladimir, Ivanovic; Zhang, Yijing; Fujii, Yuji

Automatic Transmission Upshift Control Using a Linearized Reduced-Order Model-Based LQR Approach // SAE Int. J. Adv. & Curr. Prac. in Mobility 3(5)
Detroit (MI), 2021. str. 2290-2300 doi:10.4271/2021-01-0697 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

doi saemobilus.sae.org

494.

Topić, Jakov; Škugor, Branimir; Deur, Joško

Synthesis and Validation of Multidimensional Driving Cycles // SAE Int. J. Adv. & Curr. Prac. in Mobility 3(4)
Detroit (MI), Sjedinjene Američke Države, 2021. str. 1558-1568 doi:10.4271/2021-01-0125 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

doi www.sae.org

495.

Mrzljak, Vedran; Prpić-Oršić, Jasna; Poljak, Igor; Baressi Šegota, Sandi

Efficiencies and losses comparison of three steam turbines – from conventional, nuclear and marine power plant // XVIII INTERNATIONAL SCIENTIFIC CONGRESS MACHINES. TECHNOLOGIES. MATERIALS - PROCEEDINGS - 2021 / Popov, Georgi ; Dikova, Tsanka (ur.).
Sofija: Scientific technical union of mechanical engineering “Industry - 4.0”, 2021. str. 5-9 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada mtmcongress.com mtmcongress.com

496.

Mrzljak, Vedran; Prpić-Oršić, Jasna; Poljak, Igor; Lorencin, Ivan

Energy and exergy losses analysis of back-pressure steam turbine from chp plant // XIV INTERNATIONAL CONFERENCE FOR YOUNG RESEARCHERS TECHNICAL SCIENCES. INDUSTRIAL MANAGEMENT - PROCEEDINGS - 2021 / Angelov, Cyril (ur.).
Sofija: Scientific technical union of mechanical engineering “Industry - 4.0”, 2021. str. 3-6 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada youngconference.com youngconference.com

497.

Mrzljak, Vedran; Prpić-Oršić, Jasna; Poljak, Igor; Anđelić, Nikola

Determination of energy loss and efficiency for the low power steam turbine and each of its segments // VI INTERNATIONAL SCIENTIFIC CONFERENCE - HIGH TECHNOLOGIES. BUSINESS. SOCIETY. - PROCEEDINGS - 2021 / Popov, Georgi ; Nikolcheva, Galina (ur.).
Sofija: Scientific technical union of mechanical engineering “Industry - 4.0”, 2021. str. 8-12 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada hightechsociety.eu hightechsociety.eu

498.

Golonka, Emil; Pająk, Michał; Kolar, Davor

Selected diagnostic methods used in Hydroelectric Power Plants // MATEC Web of Conferences 332 (2021) / Musiał, J. ; Matuszewski, M. ; Muślewski, Ł. ; Kałaczyński T. (ur.).
Carlton: EDP Sciences, 2021. 01011, 10 doi:10.1051/matecconf/202133201011 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

doi www.matec-conferences.org

499.

Pająk, Michał; Lisjak, Dragutin; Kluczyk, Marcin; Kolar, Davor

Analysis of the sensitivity of the identification method of inability states of rotating systems to the conditions of the experiment // MATEC Web of Conferences Volume 332 (2021) / Musiał, J. ; Matuszewski, M. ; Muślewski, Ł. ; Kałaczyński T. (ur.).
Carlton: EDP Sciences, 2021. 01016, 9 doi:10.1051/matecconf/202133201016 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

doi www.matec-conferences.org doi.org

500.

Kirinčić, Mateo; Trp, Anica; Lenić, Kristian; Torbarina, Fran

Experimental analysis of latent thermal energy storage charging and discharging // Proceedings of ISES EuroSun 2020 Conference - 13th International Conference on Solar Energy for Buildings and Industry / Charalambides, Alexandros ; Streicher, Wolfgang ; Mugnier, Daniel (ur.).
Atena, 2021. str. 678-686 doi:10.18086/eurosun.2020.07.01 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

doi proceedings.ises.org

501.

Kirinčić, Mateo; Trp, Anica; Lenić, Kristian; Wolf, Igor

Experimental investigation on melting of paraffin in latent thermal energy storage // Proceedings of the 14th International Renewable Energy Storage Conference 2020 (IRES 2020) / Droege, Peter ; Stadtler, Ingo ; Trimborn, Christoph (ur.).
Düsseldorf: Atlantis Press, 2021. str. 193-198 doi:10.2991/ahe.k.210202.028 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

doi www.atlantis-press.com

502.

Šarlija, Luka; Bakić, Ante; Kozak, Dražan; Surjak Martin

Analiza pneumatskog prsta za zaključavanje manipulatora unutar cijevi parogeneratora metodom konačnih elemenata // Zbornik radova 10. susreta Hrvatskog društva za mehaniku
Slavonski Brod, Hrvatska, 2020. str. 245-250 (predavanje, cjeloviti rad (in extenso), znanstveni)

www.csm.hr

503.

Klobčar, Damjan; Baloš, Sebastijan; Bušić, Matija; Đurić, Aleksija; Lindić, Maja; Ščetinec, Aljaž

WAAM and other unconvential metal additive manufacturing technologies // Zbornik radova sa 5. Međunarodne naučne konferencije "Primijenjene tehnologije u mašinskom inženjerstvu" COMETa 2020 / Radić, Nebojša ; Prodanović, Saša (ur.).
Sarajevo: Univerzitet u Istočnom Sarajevu, Mašinski fakultet Istočno Sarajevo, 2020. str. 50-64 (plenarno, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

cometa.ues.rs.ba

504.

Ilinčić, Petar; Šagi, Goran; Pejić, Goran; Lulić, Zoran

Electric Vehicles in the Republic of Croatia – Market Development, Usage and Outlook // Proceedings of the 23rd Transport and Air Pollution (TAP) conference – Part II / Karamountzou, G ; Fontaras, G ; Mamarikas, S ; Ntziachristos, L. (ur.).
Luxembourg: Publications Office of the European Union, 2020. str. 521-531 doi:10.2760/978944 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

doi op.europa.eu

505.

Pudić, Dalibor

Ekonomske posljedice smanjenja emisija u energetskoj tranziciji Europe // 11. MEĐUNARODNI SKUP O PRIRODNOM PLINU, TOPLINI I VODI, 11th INTERNATIONAL NATURAL GAS, HEAT AND WATER CONFERENCE / Raos, Pero ; Galeta, Tomislav ; Kozaka, Dražan ; Raos, Marija ; Stojšić, Josip ; Sutlović, Igor ; Tonković, Zlatko (ur.).
Slavonski Brod: Sveučilište u Slavonskom Brodu, 2020. str. 1-8 (pozvano predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

506.

Konjatić, Pejo; Turk, Dorian; Aušić, Tomislav; Gelo, Ivan

Fatigue calculation of “SH” drainpipes // VI International Scientific Congress Innovations 2021 – Proceedings
Varna, 2020. str. 124-126 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

507.

Klun, Mario; Guzović, Zvonimir; Rašković, Predrag

Numerical modeling of the Flow in an Organic Rankine Cycle Small Axial Turbine with Partial Admission // Digital Proceedings of The 15th SDEWES Conference
Köln, Njemačka, 2020. str. 1-18 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

508.

Zeba, Gordana; Dabić, Marina; Čičak, Mirjana; Daim, Tugrul

Artificial Intelligence in Manufacturing: Bibliometric and Content Analysis // Proceedings 2020 IEEE / ITU International Conference on Artificial Intelligence for Good (AI4G)
Ženeva, Švicarska: Institute of Electrical and Electronics Engineers (IEEE), 2020. str. 95-100 doi:10.1109/AI4G50087.2020.9311087 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

doi

509.

Zeba, Gordana; Aleksić, Dino; Čičak, Mirjana

RFID technology for the development and competitiveness of an SME in the Croatian metalworking industry // Proceedings Volume III, Dominant technologies in "Industry 4.0" BUSINESS & "INDUSTRY 4.0"
Sofija, 2020. str. 281-284 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

510.

Zeba, Gordana; Čičak, Mirjana

Application of RFID Technology for Better Efficiency of Resource Planning // Lecture Notes in Networks and Systems, New Technologies, Development and Application III , vol 128. / Isak Karabegović (ur.).
Cham: Springer, 2020. str. 382-387 doi:10.1007/978-3-030-46817-0_43 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

doi

511.

Lorenzana, Antolin; Magdaleno, Alvaro; Jarak, Tomislav; Martinez, Roberto; Balmori, Antonio; Basterra, Luis-Alfonso; del Val, Lara; Villacorta, Juan J.; Izquierdo, Alberto

Modal identification of structures during static load testing: Interaction effects // Proceedings of the International Conference on Structural Dynamic, Volume 1, EURODYN 2020 / Papadrakakis, M. ; Fragiadakis, M. ; Papadimitriou, C. (ur.).
Atena: European Association for Structural Dynamics Procedia, 2020. str. 1002-1010 doi:10.47964/1120.9080.20168 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

doi www.easdprocedia.org

512.

Adamović, Petra; Čengić, Tomislav; Kodvanj, Janoš; Smoljanović, Tomislav; Alerić, Andrija; Bohaček, Ivan; Sabalić, Srećko; Delimar, Domagoj

Eksperimentalno ispitivanje utjecaja ugradnje femuralnog stema na stabilnost pri različitim stupnjevima anteverzije // Zbornik radova Desetog susreta Hrvatskog društva za mehaniku: Slavonski Brod, 01. - 02. listopada 2020. godine, održan online / Damjanović, Darko ; Kozak, Dražan ; Konjatić, Pejo ; Katinić, Marko (ur.).
Zagreb: Hrvatsko društvo za mehaniku (HDM), 2020. str. 13-18 (predavanje, recenziran, cjeloviti rad (in extenso), znanstveni)

csm.hr

513.

Tomičević, Zvonimir; Mađerić, Gabrijel; Bilobrk, Juro; Hild, François

Identifikacija oštećenja u kompozitima ojačanim staklenim vlaknima primjenom µ-tomografije // Zbornik radova Desetog susreta Hrvatskog društva za mehaniku / Damjanović, Darko ; Kozak, Dražan ; Konjatić, Pejo ; Katinić, Marko (ur.).
Slavonski Brod: GRAFIKA d.o.o., 2020. str. 289-294 (predavanje, domaća recenzija, cjeloviti rad (in extenso), znanstveni)

www.csm.hr

514.

Šimunović, Vinko; Kovačić, Tena

Epoksidni premazi otporni na koroziju i mehaničko trošenje // 24. međunarodno savjetovanje o zaštiti materijala i industrijskom finišu "KORMAT 2020" / Stojanović, Ivan ; Šimunović, Vinko ; Alar, Vesna (ur.).
Zagreb: Hrvatsko društvo za zaštitu materijala (HDZaMa), 2020. str. 103-104 (poster, recenziran, cjeloviti rad (in extenso), znanstveni)

515.

Kolar, Davor; Lisjak, Dragutin; Gudlin, Mihael

CNN Hyperparameters Selection for Rotating Subsystems Fault Diagnosis // Conference Proceedings od 5th Lean Spring Summit / Stefanic, Nedeljko ; Cajner, Hrvoje (ur.).
Zagreb, 2020. str. 18-24 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

516.

Jelena, Ivančan; Dragutin, Lisjak; Nataša, Tošanović; Maja, Trstenjak

The Role of Failure Mode and Effects Analysis in Maintenance Strategy // Conference Proceedings of the 5th International Scientific Conference Lean Spring Summit 2020 / Nedeljko Šteafnić, Hrvoje Cajner (ur.).
Zagreb: Culmena, 2020. str. 7-10 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

517.

Karakašić, Mirko; Perković, Dalibor; Grgić, Ivan; Glavaš, Hrvoje

Optimizing the Mass of the Structure Using the Response Surface Method // 29th International Scientific Conference 'ORGANIZATION AND MAINTENANCE TECHNOLOGY' / Karakašić, Mirko ; Vidaković, Držislav ; Fekete, Krešimir ; Blažević, Damir ; Glavaš, Hrvoje (ur.).
Osijek: Panon Think tank for strategic studies - Osijek, 2020. str. 1-8 (pozvano predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada oto2020.panon.eu

518.

Mihanovic, Luka; Jelic, Maro; Sumic, Tino; Radica, Gojmir; Racic, Nikola

Experimental investigation of exhaust emission from marine diesel engines // 2020 5th International Conference on Smart and Sustainable Technologies (SpliTech)
Split, Hrvatska: Institute of Electrical and Electronics Engineers (IEEE), 2020. str. 1-5 doi:10.23919/splitech49282.2020.9243740 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

doi ieeexplore.ieee.org

519.

Koričan, Marija; Perčić, Maja; Vladimir, Nikola; Soldo, Vladimir

Integration of renewable energy sources into the aquaculture systems considering environmental and economic aspects // Proceedings of the 12th International Conference on Applied Energy (ICAE2020) - Part 3
Bangkok, Tajland, 2020. 406, 6 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

520.

Perčić, Maja; Vladimir, Nikola; Fan, Ailong; He, Yapeng

Reduction of CO2 emissions of inland passenger and cargo vessels by alternative power system configurations // Proceedings of the 12th International Conference on Applied Energy (ICAE2020) - Part 3
Bangkok, Tajland, 2020. 453, 6 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

521.

Perčić, Maja; Vladimir, Nikola; Fan, Ailong; Koričan, Marija; Jovanović, Ivana

Towards environmentally friendly short-sea transportation via integration of renewable energy sources in the ship power systems // Proceedings of the Applied Energy Symposium: Low carbon cities and urban energy systems (CUE2020) - Part 2
Tokyo, Japan, 2020. D-171, 6 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

522.

Kocijan, Martina; Ćurković, Lidija; Radošević, Tina; Podlogar, Matejka

Preparation, Characterization and Photocatalytic Activity of TiO2/Reduced Graphene Oxide Nanocomposite // Proceedings of the 31st International DAAAM Virtual Symposium "Intelligent Manufacturing & Automation" / Katalinic, B. (ur.).
Beč: DAAAM International Vienna, 2020. str. 0668-0676 doi:10.2507/31st.daaam.proceedings.093 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada doi www.daaam.info daaam.info

523.

Šercer, Mario; Mihalic Pokopec, Ivana; Grabar Branilović, Marina; Pofuk, Matija

Parametric design of spur gear // Economic and Social Development : 53rd International Scientific Conference on Economic and Social Development Development : Book of Proceedings / Klopotan, Igor ; Czako, Katalin ; Beker, Victor (ur.).
Sveti Martin na Muri, Hrvatska: Varazdin Development and Entrepreneurship Agency ; University North, 2020, 2020. str. 75-85 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

524.

Sabo, Jozef; Szabo, Stanislav; Tobisova, Alica; Pilat, Marek; Dzurovčin, Peter; Nemethova, Helia; Mako, Sebastian; Vuković, Danijel

Economic comparison of UAV´s and helicopters used for terrain mapping // 2020 5th International Conference on Smart and Sustainable Technologies (SpliTech) : proceedings
Split, Hrvatska: Institute of Electrical and Electronics Engineers (IEEE), 2020. 9243696, 6 doi:10.23919/splitech49282.2020.9243696 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

doi ieeexplore.ieee.org

525.

Szabo, Stanislav; Svab, Patrik; Keselova, Michaela; Liptakova, Dorota; Koscak, Peter; Vuković, Danijel; Nemethova, Helia

Use of progressive cement-concrete mixtures for runway construction and repair // 2020 5th International Conference on Smart and Sustainable Technologies (SpliTech) : proceedings
Split, Hrvatska: Institute of Electrical and Electronics Engineers (IEEE), 2020. 9243842, 4 doi:10.23919/splitech49282.2020.9243842 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

doi ieeexplore.ieee.org

526.

Rozenberg, Robert; Szabo, Stanislav; Polishchuk, Volodymyr; Nemethova, Helia; Jevcak, Jaroslav; Choma, Ladislav; Kelemen, Martin; Vuković, Danijel

Information Model for Evaluation and Selection of Instructor Pilots for Smart City Urban Air Mobility // 2020 5th International Conference on Smart and Sustainable Technologies (SpliTech) : proceedings
Split, Hrvatska: Institute of Electrical and Electronics Engineers (IEEE), 2020. 9243702, 6 doi:10.23919/splitech49282.2020.9243702 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

doi ieeexplore.ieee.org

527.

Kelemen, Miroslav; Polishchuk, Volodymyr; Liakh, Ihor; Nemethova, Helia; Jevcak, Jaroslav; Choma, Ladislav; Kelemen, Martin; Vuković, Danijel

Municipality Management and Model of Evaluation and Selection of the Expert Group Members for Smart City Transportation and Mobility including UAV/UAS // 2020 5th International Conference on Smart and Sustainable Technologies (SpliTech) : proceedings
Split, Hrvatska: Institute of Electrical and Electronics Engineers (IEEE), 2020. 9243705, 6 doi:10.23919/splitech49282.2020.9243705 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

doi ieeexplore.ieee.org

528.

Kalavsky, Peter; Mikula, Branko; Rozenberg, Robert; Antosko, Matej; Sabo, Jozef; Petricek, Pavol; Vuković, Danijel; Nemethova, Helia

The Research Methodology of the Impact of Self- regulatory Methods on Pilot's Performance –Partial Results // 2020 5th International Conference on Smart and Sustainable Technologies (SpliTech) : proceedings
Split, Hrvatska: Institute of Electrical and Electronics Engineers (IEEE), 2020. 9243724, 4 doi:10.23919/splitech49282.2020.9243724 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

doi ieeexplore.ieee.org

529.

Ďučo, Stanislav; Megyesi, Dávid; Bréda, Róbert; Schrötter, Martin; Leško, Jakub; Rozenberg, Róbert; Vukovič, Danijel; Némethová, Hélia

Electronic Education in Aviation Technical Personnel Education // 2020 5th International Conference on Smart and Sustainable Technologies (SpliTech) - proceedings
online: Institute of Electrical and Electronics Engineers - IEEE, 2020. str. 1-6 doi:10.23919/splitech49282.2020.9243834 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

doi ieeexplore.ieee.org

530.

Braut, Sanjin; Skoblar, Ante; Štimac Rončević, Goranka; Žigulić, Roberto

Effect of L/D ratio and clearance of 3-lobe taper land bearing on stability of flexible rotor system // PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON VIBRATIONS IN ROTATING MACHINERY (ONLINE, UK, 2020)
London : Delhi: CRC Press ; A.A. Balkema Publishers, 2020. str. 377-387 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

531.

Alujević, Neven; Čakmak, Damjan; Jokić, Marko; Wolf, Hinko

Stabilisation of a non-collocated velocity feedback system by the use of inerter // Proceedings of the International Conference on Noise and Vibration Engineering (ISMA2020) and the International Conference on Uncertainty in Structural Dynamics (USD2020) / Desmet, W ; Pluymers, B ; Moens, D (ur.).
Leuven: KU Leuven - Departement Werktuigkunde, 2020. 678, 15 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

532.

Tomerlin, Damir; Kozak, Dražan; Gubeljak, Nenad; Damjanović, Darko

Numerička analiza distorzija i zaostalih naprezanja pri zavarivanju kutnih spojeva S690QL limova // Zbornik radova Desetog susreta Hrvatskog društva za mehaniku / Damjanović, Darko ; Kozak, Dražan ; Konjatić, Pejo ; Katinić, Marko (ur.).
Slavonski Brod: Hrvatsko društvo za mehaniku (HDM), 2020. str. 277-282 (predavanje, cjeloviti rad (in extenso), znanstveni)

csm.hr

533.

Gelo, Ivan; Kozak, Dražan; Gubeljak, Nenad; Damjanović, Darko; Tomaž, Vuherer

Mehanička svojstva legure Ti-6Al-7Nb proizvedene vučenjem i selektivnim laserskim taljenjem // Zbornik radova Desetog susreta Hrvatskog društva za mehaniku / Damjanović, Darko ; Kozak, Dražan ; Konjatić, Pejo ; Katinić, Marko (ur.).
Slavonski Brod: Hrvatsko društvo za mehaniku (HDM), 2020. str. 65-70 (predavanje, cjeloviti rad (in extenso), znanstveni)

csm.hr

534.

Meha, Drilon; Thakur, Jagruti; Novosel, Tomislav; Pukšec, Tomislav; Duić, Neven

Annual heat demand curve and extension analysis of district heating system // Digital Proceedings of the 15th SDEWES Conference on Sustainable Development of Energy, Water and Environment Systems
Köln, Njemačka, 2020. SDEWES2020.0091, 18 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

535.

Troha, Sanjin; Stefanović-Marinović, Jelena; Vrcan, Željko

Basic Kinematic Characterstics of Two-Speed Planetary Gear Trains with Brakes on Single Shafts // THE FIFTH INTERNATIONAL CONFERENCE “MECHANICAL ENGINEERING IN XXI CENTURY”
Niš, Srbija, 2020. str. 171-174 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

536.

Pelić, Vladimir; Mrakovčić, Tomislav; Medica-Viola, Vedran; Valčić, Marko

Reducing Environmental Impact and Fuel Costs by Installing a Photovoltaic Power Plant On Board // Book of Proceedings of the 24th Symposium on Theory and Practice of Shipbuilding, In Memoriam of prof. Leopold Sorta / Matulja, Tin (ur.).
Rijeka: University of Rijeka, Faculty of Engineering, 2020. str. 389-402 (predavanje, domaća recenzija, cjeloviti rad (in extenso), znanstveni)

indico.riteh.hr

537.

Valčić, Marko; Prpić-Oršić, Jasna; Čarija, Zoran

An Artificial Neural Network Approach to Wind Loads Estimation // Book of Proceedings of the 24th Symposium on Theory and Practice of Shipbuilding, In Memoriam of prof. Leopold Sorta / Matulja, Tin (ur.).
Rijeka: University of Rijeka, Faculty of Engineering, 2020. str. 143-153 (predavanje, domaća recenzija, cjeloviti rad (in extenso), znanstveni)

indico.riteh.hr

538.

Kačmarčik, Josip; Hadžalić, Mustafa; Konjatić, Pejo

Primjena SINTAP/FITNET metode u procjeni cjelovitosti elementa spojnog pribora // Zbornik radova desetog susreta Hrvatskog društva za mehaniku / Damjanović, Darko ; Kozak, Dražan ; Konjatić, Pejo ; Katinić, Marko (ur.).
Slavonski Brod, 2020. str. 107-112 (predavanje, domaća recenzija, cjeloviti rad (in extenso), znanstveni)

539.

Marić, Dejan; Samardžić, Mijat; Marsenić, Tihomir; Šolić Tomislav; Pavić, Josip; Samardžić, Ivan; Despotović, Božo

On-line monitoring of MAG-CMT welding process // Proceedings of The Fifth International Conference – MASING 2020 / Janković, Predrag (ur.).
Niš: Faculty of Mechanical Engineering in Niš, 2020. str. 183-186 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

540.

Zaplatić, Andrija; Tomičević, Zvonimir; Čakmak, Damjan; Hild, Francois

Ispitivanje tankih limova na smicanje primjenom višeosnog Arcan prihvata // Zbornik radova Desetog susreta Hrvatskog društva za mehaniku / Damjanović, Darko ; Kozak, Dražan ; Konjatić, Pejo ; Katinić, Marko (ur.).
Slavonski Brod: GRAFIKA d.o.o., 2020. str. 301-6 (predavanje, domaća recenzija, cjeloviti rad (in extenso), znanstveni)

541.

Vrgoč, Ana; Zaplatić, Andrija; Čakmak, Damjan; Tomičević, Zvonimir

Identifikacija oštećenja u epoksidnoj smoli ojačanoj mat staklenim vlaknima // Zbornik radova Desetog susreta Hrvatskog društva za mehaniku / Damjanović, Darko ; Kozak, Dražan ; Konjatić, Pejo ; Katinić, Marko (ur.).
Slavonski Brod: GRAFIKA d.o.o., 2020. str. 295-300 (predavanje, domaća recenzija, cjeloviti rad (in extenso), znanstveni)

542.

Baručija, Anel; Kačmarčik, Josip; Hadžalić, Mustafa; Mujagić, Derviš

PRIMJENA PRINTANIH 3D MODELA U PROCESU LIVENJA REZERVNIH DIJELOVA // 6th Conference „MAINTENANCE 2020“ / Fuad Hadžikadunić, Darko Petković (ur.).
Zenica: University of Zenica, Faculty of Mechanical Engineering, 2020. str. 225-233 (predavanje, recenziran, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

543.

Juranić, Jasmin; Pavković, Neven; Jurinić, Dominik

Management of design iterations on coupled parameters in design teamwork using multiple domain matrix and Coloured petri nets // Proceedings of the Design Society: DESIGN Conference, Vol. 1
Dubrovnik, Hrvatska: Cambridge University Press, 2020. str. 617-626 doi:10.1017/dsd.2020.264 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

doi www.cambridge.org

544.

Vidaković, Ivan; Heffer, Goran; Šimunović, Katica; Rozing, Goran; Barač, Željko; Janješić, Filip

Analiza trošenje pokretnih dijelova homogenizatora za miješanje smjese u tvornici stočne hrane – studij slučaja // Proceedings & abstract of the 13th International Scientific/Professional Conference Agriculture in Nature and Environment Protection / Jug, Danijel ; Ravlić, Marija (ur.).
Osijek: Glas Slavonije d.d., 2020. str. 344-349 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

545.

Šimunović, Vinko; Stojanović, Ivan

Corrosion damages of high-alloy "stainless" steels structures // KORMAT 2020 / Stojanović, Ivan ; Šimunović, Vinko ; Alar, Vesna (ur.).
Zagreb: Hrvatsko društvo za zaštitu materijala (HDZaMa), 2020. str. 75-86 (predavanje, domaća recenzija, cjeloviti rad (in extenso), znanstveni)

546.

Kurtela, Marin; Šimunović, Vinko; Alar, Vesna; Stojanović, Ivan

Termodinamički parametri taloženja cerij(III) klorid heptahidrata na površinu aluminijske legure 2024-T3 u kloridnoj otopini // KORMAT 2020, Stainless Steels
Zagreb, Hrvatska, 2020. str. 89-90 (poster, domaća recenzija, cjeloviti rad (in extenso), znanstveni)

547.

Lorencin, Ivan; Štifanić, Daniel; Musulin, Jelena; Mrzljak, Vedran

Energy and exergy evaluation of CO2 closed-cycle gas turbine // V INTERNATIONAL SCIENTIFIC CONFERENCE "INDUSTRY 4.0" - PROCEEDINGS 2020 - VOLUME 3 (DOMINANT TECHNOLOGIES IN “INDUSTRY 4.0”) / Popov, Georgi ; Ovtcharova, Jivka (ur.).
Sofija: Scientific technical union of mechanical engineering “Industry - 4.0”, 2020. str. 123-126 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada industry-4.eu industry-4.eu

548.

Mrzljak, Vedran; Lorencin, Ivan; Anđelić, Nikola; Car, Zlatan

Dual-flow dissymmetrical low pressure steam turbine energy analysis – comparison of both turbine cylinders // V INTERNATIONAL SCIENTIFIC CONFERENCE "INDUSTRY 4.0" - PROCEEDINGS 2020 - VOLUME 3 (DOMINANT TECHNOLOGIES IN “INDUSTRY 4.0”) / Popov, Georgi ; Ovtcharova, Jivka (ur.).
Sofija: Scientific technical union of mechanical engineering “Industry - 4.0”, 2020. str. 119-122 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada industry-4.eu industry-4.eu

549.

Čanađija, Marko

Nelokalni slojeviti gredni nosači u neizotermnim uvjetima. Sprega i Laplaceove transformacije // Zbornik radova desetog susreta Hrvatskog društva za mehaniku / Damjanović, Darko ; Kozak, Dražen ; Konjatić, Pejo ; Katinić, Marko (ur.).
Slavonski Brod: Hrvatsko društvo za mehaniku (HDM), 2020. str. 61-64 (predavanje, recenziran, cjeloviti rad (in extenso), znanstveni)

www.csm.hr

550.

Mrzljak, Vedran; Lorencin, Ivan; Anđelić, Nikola; Baressi Šegota, Sandi

Comparison of three methods for the pump energy analysis // IV INTERNATIONAL SCIENTIFIC CONFERENCE MATHEMATICAL MODELING 2020 - PROCEEDINGS / Firsov, Andrey (ur.).
Sofija: Scientific technical union of mechanical engineering “Industry - 4.0”, 2020. str. 5-8 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada mathmodel.eu mathmodel.eu

551.

Barac, Antun; Živić, Marija

Termodinamički model procesa toplinom pokretanog hlađenja // Zbornik radova 10. susreta Hrvatskog društva za mehaniku / Damjanović, Darko ; Kozak, Dražan ; Konjatić, Pejo ; Katinić, Marko (ur.).
Slavonski Brod: Hrvatsko društvo za mehaniku (HDM), 2020. str. 31-36 (predavanje, domaća recenzija, cjeloviti rad (in extenso), znanstveni)

www.csm.hr

552.

Bajtarević, Amna; Kačmarčik, Josip; Vukojević, Nedeljko; Hadžikadunić, Fuad

NUMERIČKO I ANALITIČKO ODREĐIVANJE FAKTORA INTENZITETA NAPONA ZA PUKOTINU U CIJEVI // ZBORNIK RADOVA SA 5. MEĐUNARODNE NAUČNE KONFERENCIJE ”Primijenjene tehnologije u mašinskom inženjerstvu”, COMETa2020, Istočno Sarajevo, 2020. / Radić, Nebojša (ur.).
Sarajevo: University of East Sarajevo, Faculty of Mechanical Engineering East Sarajevo, 2020. str. 181-188 (predavanje, recenziran, cjeloviti rad (in extenso), znanstveni)

cometa.ues.rs.ba

553.

Švec, Marko; Ileš, Šandor; Matuško, Jadranko

Sliding Mode Control of Custom Built Rotary Inverted Pendulum // 43nd International Convention on Information and Communication Technology, Electronics and Microelectronics (MIPRO 2020)
Opatija, Hrvatska: Institute of Electrical and Electronics Engineers (IEEE), 2020. str. 943-947 doi:10.23919/mipro48935.2020.9245135 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

doi ieeexplore.ieee.org

554.

Smajic, Selver; Jovanovic, Juraj

INFLUENCE OF DIFFERENT PRODUCTION PROCESSES ON THE SURFACE ROUGHNESS OF OAK WOOD SAMPLES // PROCEEDINGS OF THE 5th INTERNATIONAL SCIENTIFIC CONFERENCE ”Conference on Mechanical Engineering Technologies and Applications” COMETa2020, East Sarajevo, 2020 / PhD Radic, Nebojsa ; PhD Prodanovic, Sasa (ur.).
Sarajevo: University of East Sarajevo, Faculty of Mechanical Engineering, 2020. str. 130-136 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada cometa.ues.rs.ba

555.

Tolj, Ivan; Radica, Gojmir; Lototskyy, Mykhaylo; Pasupathi, Sivakumar

Control strategy of Fuel cell-Battery hybrid system for optimizing Lift truck load cycle // SpliTech 2020
online: Institute of Electrical and Electronics Engineers Inc., 2020. 9243836, 4 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

556.

Seleš, Karlo; Tomić, Zoran; Tonković, Zdenko; Sorić, Jurica

Rješavanje problema krhkog, duktilnog i zamornog loma primjenom poopćenog modela faznih polja implementiranog u programski paket ABAQUS // Zbornik radova Desetog susreta Hrvatskog društva za mehaniku / Damjanović, Darko ; Kozak, Dražen ; Konjatić, Pejo ; Katinić, Marko (ur.).
Slavonski Brod, 2020. str. 251-256 (predavanje, podatak o recenziji nije dostupan, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada www.csm.hr

557.

Marušić, Ante; Zirdum, Maja; Šimunić, Slaven; Marušić, Vlatko

Specifičnosti izrade i ispitivanja čeličnih bešavnih boca za ukapljene plinove // Zbornik radova 35. međunarodnog znanstveno- stručnog skupa stručnjaka za plin / Banovac, Eraldo ; Pudić, Dalibor (ur.).
Zagreb: Hrvatska stručna udruga za plin (HSUP), 2020. str. 248-255 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

susret.hsup.hr

558.

Dundović, Maja; Marković, Kristina; Franulović, Marina; Vrcan, Željko

Digital light processing in photoelastic models production for material behavior modeling // ICSID 2020 - 4th International Conference on Structural Integrity and Durability - Book of Abstracts / Božić, Željko (ur.).
Zagreb: Fakultet strojarstva i brodogradnje Sveučilišta u Zagrebu, 2020. str. 1-4 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

559.

Kozina, Ante; Radica, Gojmir; Nižetić, Sandro;

Emission of diesel powered vehicle under real operating conditions-impact of emissions control system // 9th International Exergy, Energy and Environment Symposium (IEEES-9)
Split, 2020. 1570637537, 6 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

560.

Tunuković, Antun; Marić, Dejan; Šolić, Tomislav; Duspara, Miroslav; Pavić, Josip; Samardžić, Ivan; Stoić, Antun

Primjena tehnologije zavarivanja austenitnog Cr- Ni nehrđajućeg čelika s ugljičnim čelikom pri izradi kompenzatora // Zbornik radova 18. skup o prirodnom plinu, toplini i vodi, 18th Natural Gas, Heat and Water Conference, 11. međunarodni skup o prirodnom plinu, toplini i vodi, 11th International Natural Gas, Heat and Water Conference / Raos, Pero ; Galeta, Tomislav ; Kozak, Dražan ; Raos, Marija ; Stojšić, Josip ; Sutlović, Igor ; Tonković, Zlatko (ur.).
Slavonski Brod: Sveučilište u Slavonskom Brodu, 2020. str. 236-247 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

561.

Trzun, Zvonko; Vrdoljak, Milan

Monte Carlo Simulation of Missile Trajectories Dispersion Due to Imperfectly Manufactured Warhead // Proceedings of the 31st DAAAM International Symposium / Katalinic, Branko (ur.).
Beč: DAAAM International Vienna, 2020. str. 0574-0583 doi:10.2507/31st.daaam.proceedings.079 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada doi www.daaam.info

562.

Bukvić, Dalibor; Šolić, Miroslav; Marijanović, Krešimir; Stojkov, Marinko

Digitalna transformacija očitanja potrošnje plina u tvrtki Brod-plin // ZBORNIK RADOVA 35. MEĐUNARODNOG ZNANSTVENO-STRUČNOG SKUPA STRUČNJAKA ZA PLIN PROCEEDINGS OF THE 35th INTERNATIONAL SCIENTIFIC & EXPERT MEETING OF GAS PROFESSIONALS / Banovac, Eraldo ; Pudić, Dalibor ; Dujčinović, Zoran (ur.).
Zagreb: Hrvatska stručna udruga za plin / Croatian Gas Association, Heinzelova 9, Zagreb, 2020. str. 73-85 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

susret.hsup.hr

563.

Klarin Branko, Gašparović Goran, Vrsalović Đani, Jurčević Mišo

The drone air-path development // 5th International Conference on Smart and Sustainable Technologies
Bol, Hrvatska; Split, Hrvatska, 2020. str. str-str (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

564.

Nižetić Sandro; Jurčević Mišo

Solar power plant with short diffuser concept: An Overview of development // 5th International Conference on Smart and Sustainable Technologies
Bol, Hrvatska; Split, Hrvatska, 2020. str. str-str (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

565.

Nižetić Sandro, Jurčević Mišo, Čoko Duje, Papadopoulos Agis M., Giama Effrosyni, Arıci Muslum

Experimental investigation of nano-enhanced phase change materials: Addition of Graphene into RT28 HC and RT26 // 23rd Conference on Process Integration. Modelling, and Optimisation for Energy Saving and Pollution Reduction, PRES’20
Xi’an, Kina, 2020. str. str-str (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

566.

Drobilo, Luka; Švaco, Marko; Jerbić, Bojan

Increasing the Accuracy of Robotic Neurosurgical Procedures Through Robot Calibration // MIPRO 2020 43rd International Convention Proceedings / Skala, Karolj (ur.).
Opatija, 2020. str. 1428-1436 doi:10.23919/MIPRO48935.2020.9245233 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

doi docs.mipro-proceedings.com ieeexplore.ieee.org

567.

Gašparović, Goran; Klarin, Branko; Grebo, Alen; Mladenović, Saša

New Concept of Firefighting Aerial Support with Autonomous Unmanned Aerial Systems (AUAS) // NTinAD 2020: New Trends in Aviation Development: The XV. International Scientific Conference: Proceedings / Andoga, Rudolf ; Főző, Ladislav (ur.).
Lahti: Institute of Electrical and Electronics Engineers (IEEE), 2020. str. 78-83 doi:10.1109/NTAD51447.2020.9379112 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

doi ieeexplore.ieee.org ieeexplore.ieee.org

568.

Žgaljić , Adrian; Švaco , Marko; Jerbić , Bojan

Improving Markerless Registration Accuracy by Mapping Facial Deformation // MIPRO Proceedings
Opatija, 2020. str. 1443-1447 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

www.mipro.hr

569.

Polančec, Tomislav; Lesičar, Tomislav; Vučković, Krešimir; Tonković, Zdenko

Osvrt na numeričke postupke izračunavanja radnog vijeka zupčanika podvrgnutih procesu rupičenja // Zbornik radova desetog susreta Hrvatskog društva za mehaniku / Damjanović, Darko ; Kozak, Dražan ; Konjatić, Pejo ; Katinić, Marko (ur.).
Zagreb: Hrvatsko društvo za mehaniku (HDM), 2020. str. 201-206 (predavanje, cjeloviti rad (in extenso), znanstveni)

www.csm.hr

570.

Terze, Zdravko; Pandža, Viktor; Zlatar, Dario

Lie Group Dynamics of Multibody System in Vortical Fluid Flow // First International Nonlinear Dynamics Conference (NODYCON 2019) / Lacarbonara, Walter ; Balachandran, Balakumar ; Ma, Jun ; Tenreiro Machado, J. A. ; Stepan, Gabor (ur.).
Rim, Italija: Springer, 2020. str. 409-417 doi:10.1007/978-3-030-34713-0_41 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

doi

571.

Pustaić, Dragan

Približno rješenje za raspodjelu naprezanja u štapu opterećenom na savijanje u uvjetima stacionarnoga puzanja // Zbornik radova Desetoga susreta Hrvatskoga društva za mehaniku / Damjanović, Darko ; Kozak, Dražan ; Konjatić, Pejo ; Katinić, Marko (ur.).
Slavonski Brod: Hrvatsko društvo za mehaniku (HDM), 2020. str. 207-214 (predavanje, recenziran, cjeloviti rad (in extenso), znanstveni)

572.

Stojkov, Marinko; Crnogorac, Krešimir; Šljivac, Damir; Čikić, Ante; Samardžić, Ivan; Stoić, Antun; Hercog, Mladen; Crnogorac, Bernarda; Alinjak, Tomislav; Bošnjaković, Mladen

Reducing energy consumption and optimisation of indoor living parameters // Proceedings of 2020 International Conference on Smart Systems and Technologies (SST) / Žagar, Drago ; Martinović, Goran ; Rimac Drlje, Snježana ; Galić, Irena (ur.).
Osijek: Fakultet elektrotehnike, računarstva i informacijskih tehnologija Sveučilišta Josipa Jurja Strossmayera u Osijeku, 2020. str. 219-223 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

573.

Pudić, Dalibor; Stojkov, Marinko; Babić, Stipe Matej

Utjecaj pumpi s frekvencijskom regulacijom na energetsku učinkovitost // ZBORNIK RADOVA 11. MEĐUNARODNOG SKUPA O PRIRODNOM PLINU, TOPLINI I VODI PROCEEDINGS OF 11th INTERNATIONAL NATURAL GAS, HEAT AND WATER CONFERENCE / Raos, Pero ; Galeta, Tomislav ; Kozak, Dražan ; Raos, Marija ; Stojšić, Josip ; Sutlović, Igor ; Tonković, Zlatko (ur.).
Slavonski Brod: Sveučilište u Slavonskom Brodu, 2020. str. 54-61 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

konferencija-plin.sfsb.hr

574.

Hornung, Krunoslav; Stojkov, Marinko; Ratkovčić, Ivan

Utjecaj FN elektrana instaliranih na krovovima kuća na potrošnju energije i održivi razvoj // Zbornik radova 18. skupa o prirodnom plinu, toplini i vodi / PROCEEDINGS OF 11th INTERNATIONAL NATURAL GAS, HEAT AND WATER CONFERENCE / Raos, Pero ; Galeta, Tomislav ; Kozak, Dražan ; Raos, Marija ; Stojšić, Josip ; Sutlović, Igor ; Tonković, Zlatko (ur.).
Slavonski Brod: Sveučilište u Slavonskom Brodu, 2020. str. 125-134 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

konferencija-plin.sfsb.hr

575.

Vrdoljak, Milan; Prebeg, Pero; Barać, Mirna Ingre; Andrić, Marijan

Design and Human-in-the-loop Simulation of Radio Controlled Fixed Wing Aircraft // Proceedings of 5th International Conference on Smart and Sustainable Technologies
Split: Fakultet elektrotehnike, strojarstva i brodogradnje Sveučilišta u Splitu, 2020. str. 1-6 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

576.

Belani, Hrvoje; Siladi, Karlo; Širjan, Jelena; Herceg, Lucija

A Thousand Face Shields for Medical Personnel in the Local Community: An Experience Report // Book of Papers - 5th International Scientific and Professional Conference (CRODMA 2020) / Gregurec, I. (ur.).
Varaždin: CRODMA - Croatian Direct Marketing Association, 2020. str. 25-34 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

crodma.hr

577.

Zmaić, Željko; Barac, Antun; Holik, Mario; Stojkov, Marinko; Živić, Marija; Šljivac, Damir; Čikić, Ante

Procjena uštede u potrošnji plina i električne energije u zgradi SFSB-a zbog doprinosa obnovljive energije iz dizalica topline i fotonaponske elektrane // Zbornik radova 18. skupa o prirodnom plinu, toplini i vodi / Raos, Pero ; Galeta, Tomislav ; Kozak, Dražan ; Raos, Marija ; Stojšić, Josip ; Sutlović, Igor ; Tonković, Zlatko (ur.).
Osijek: Sveučilište u Slavonskom Brodu, 2020. str. 106-113 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

konferencija-plin.sfsb.hr

578.

Zmaić, Željko; Barac, Antun; Holik, Mario; Stojkov, Marinko; Živić, Marija; Šljivac, Damir; Čikić, Ante

Analiza utjecaja sustava fotonaponske pretvorbe i tipa dizalice topline na energetsku učinkovitost zgrade SFSB-a u svjetlu nZEB-a // Zbornik radova 18. skupa o prirodnom plinu, toplini i vodi / Raos, Pero ; Galeta, Tomislav ; Kozak, Dražan ; Raos, Marija ; Stojšić, Josip ; Sutlović, Igor ; Tonković, Zlatko (ur.).
Osijek: Sveučilište u Slavonskom Brodu, 2020. str. 90-105 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

konferencija-plin.sfsb.hr

579.

Stefanović-Marinović, Jelena; Vrcan, Željko; Troha, Sanjin

Application of Reversing Output Dual Brake Planetary Transmissions // XIX Scientific Expert Conference on Railways RAILCON '20 Proceedings / Stamenković, Dušan ; Banić, Milan (ur.).
Niš: Faculty of Mechanical Engineering, Niš, 2020. str. 101-104 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

580.

Hoić, Matija; Kranjčević, Nenad; Herold, Zvonko; Kostelac, Milan

Design of an Active Seat Suspension for a Passenger Vehicle // Proceedings of the Design Society: DESIGN Conference
Dubrovnik, Hrvatska, 2020. str. 2511-2520 doi:10.1017/dsd.2020.119 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada doi www.cambridge.org

581.

Jurčević, Ante; Lesičar, Tomislav; Tonković, Zdenko; Sorić, Jurica

Homogenizacija s reduciranim brojem stupnjeva slobode // Zbornik radova desetog susreta Hrvatskog društva za mehaniku / Damjanović, Darko ; Kozak, Dražen ; Konjatić, Pejo ; Katinić, Marko (ur.).
Slavonski Brod, Hrvatska, 2020. str. 95-100 (predavanje, domaća recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

582.

Tomić, Zoran; Seleš, Karlo; Tonković, Zdenko

Modeliranje rasta pukotine u mikrostrukturi sinteriranog materijala metodom faznog polja // Zbornik radova desetog susreta Hrvatskog društva za mehaniku / Damjanović, Darko ; Kozak, Dražen ; Konjatić, Pejo ; Katinić, Marko (ur.).
Slavonski Brod, 2020. str. 283-288 (predavanje, recenziran, cjeloviti rad (in extenso), znanstveni)

www.csm.hr

583.

Mikulić, Dinko; Rauker, Josip; Šaban, Andrija; Katana, Branko

KARAKTERISTIKE AUTOMOBILA BUDUĆNOSTI U KONTEKSTU RAZVOJA SIGURNOSTI PROMETA // 13. Znanstveno-stručna konferencija "DANI KRIZNOG UPRAVLJANJA 2020" / Toth, Ivan (ur.).
Velika Gorica: Veleučilište Velika Gorica, 2020. str. 294-309 (predavanje, recenziran, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada dku.hr

584.

Kamenar, Ervin; Črnjarić-Žic, Nelida; Haggerty, David; Zelenika, Saša; Hawkes, Elliot W.; Mezić, Igor

Prediction of the behavior of a pneumatic soft robot based on Koopman operator theory // Proceedings of the 43rd Mipro International Convention / Skala, Karolj (ur.).
Rijeka: Hrvatska udruga za informacijsku i komunikacijsku tehnologiju, elektroniku i mikroelektroniku - MIPRO, 2020. str. 1417-1421 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

585.

Meha, Drilon; Pfeifer, Antun; Sahiti, Naser; Schneider, Daniel Rolph;

Energy Transition in highly rich Coal-based Energy System // Digital Proceedings of the 15th SDEWES Conference on Sustainable Development of Energy, Water and Environment Systems / Ban, Marko (ur.).
Zagreb: SDEWES, 2020. 13, 22 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

586.

Calise, Francesco; Duić, Neven; Orlando, Alessandra; Pfeifer, Antun; Vicidomini, Maria

A fully renewable energy scenario for island systems: a case study for Sardinia // Digital Proceedings of the 15th SDEWES Conference on Sustainable Development of Energy, Water and Environment Systems / Ban, Marko (ur.).
Zagreb: SDEWES, 2020. 128, 21 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

587.

Pfeifer, Antun; Herc, Luka; Batas Bjelić, Ilija

Flexibility Options to Tackle Intermittency in the Energy Systems with High Share of Renewable Energy // Digital Proceedings of the 15th SDEWES Conference on Sustainable Development of Energy, Water and Environment Systems / Ban, Marko (ur.).
Zagreb: SDEWES, 2020. 110, 19 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

588.

Hrnčić, Boris; Pfeifer, Antun; Ivanović, Vladan; Vušanović, Igor

Energy transition towards achieving a 100% renewable energy system: Case study of Montenegro // Digital Proceedings of the 4th South East European Conference on Sustainable Development of Energy, Water and Environment Systems / Ban, Marko (ur.).
Zagreb: SDEWES, 2020. 68, 13 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

589.

Mikulčić, Hrvoje; Dai, Gaofeng; Zhang, Jiaye; Wang, Xuebin; Tan, Houzhang; Vujanović, Milan

Decrease of High-Carbon-Ash Landfilling by Its Co- firing inside a Cement Calciner // Digital Proceedings of 4th South East European Conference on Sustainable Development of Energy, Water and Environment Systems - SEE SDEWES / Ban, Marko (ur.).
Zagreb, 2020. 276, 11 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

590.

Wang, Xuebin; Xu, Xinwei; Tan, Houzhang; Mikulčić, Hrvoje; Vujanović, Milan

Experimental and optimization study on NOx emissions of a full-scale industrial pulverized coal combustor with pre-combustion chamber // Digital Proceedings of 4th South East European Conference on Sustainable Development of Energy, Water and Environment Systems - SEE SDEWES / Ban, Marko (ur.).
Zagreb, 2020. 162, 12 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

591.

Mikulčić, Hrvoje; Stančin, Hrvoje; Jurić, Filip; Wang, Xuebin

Seawater heat pump district heating and cooling system for a Mediterranean island // Digital Proceedings of the 15th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES / Ban, Marko (ur.).
Zagreb, 2020. 517, 27 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

592.

Wang, Jin; Kang, Jiahe; Zhao, Zhanming; Mikulčić, Hrvoje; Sunden, Bengt

Effect of Combined Hole on Particle Deposition in a Turbine Cascade // Digital Proceedings of the 15th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES / Ban, Marko (ur.).
Zagreb, 2020. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

593.

Baleta, Jakov; Mikulčić, Hrvoje; Wang, Xuebin; Wang, Jin; Qi, Fengsheng; Wang, Fan

Influence of turbulence modeling in numerical simulation of ammonia combustion // Proceedings of the 23rd Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction / Petar S., Varbanov ; Jiří J., Klemeš ; Panos, Seferlis ; Ting, Ma ; Yee Van, Fan ; Xuexiu, Jia ; Xue-Chao, Wang ; Hon Huin, Chin (ur.).
Xi'an, 2020. 396, 6 (plenarno, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

594.

Cvitanić, Vedrana; Džoja, Maja

Comparison of simple and full approach for non- associated formulation based on Karafillis- Boyce stress function // 5th International Conference on Smart and Sustainable Technologies
Split, 2020. str. - (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

595.

Tomić, Andrej Zvonimir; Pivac, Ivan; Barbir, Frano

Electrochemical Characterization Of Proton Exchange Membrane Electrolyzer Under Various Operating Conditions // Proceedings SpliTech 2020
Split, Hrvatska, 2020. str. 1-3 (predavanje, domaća recenzija, cjeloviti rad (in extenso), znanstveni)

596.

Duić, Neven; Krajačić, Goran

Decarbonisation of Heating—Towards 2050 // Solar Energy Conversion in Communities : Proceedings of the Conference for Sustainable Energy (CSE) 2020, Springer Proceedings in Energy / Visa, Ion ; Duta, Anca (ur.).
Cham: Springer, 2020. str. 177-178 doi:10.1007/978-3-030-55757-7_12 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

doi link.springer.com

597.

Novak, Matija; Marenić, Eduard; Jarak, Tomislav

Piezoelektrični 1D element za rešetkaste modele // 10. susret Hrvatskog društva za mehaniku (HDMa)
Slavonski Brod, Hrvatska, 2020. str. 1-8 (predavanje, domaća recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

598.

Viderščak, Dalibor; Šolić, Sanja; Schauperl, Zdravko; Godec, Matjaž, Ćatić, Amir; Črtomir, Donik; Paulin, Irena

The Influence of Machine Type on Microstructure and Mechanical Properties of 3D Printed Commercial Co-Cr Dental Alloy // Proceeding of Euro PM2020 Congress & Exhibition / European Powder Metallurgy Association (EPMA)
Lisabon, Portugal, 2020. 4850062, 6 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

www.epma.com

599.

Kozhushko, Yuliia; Karbivska, Tetiana; Pavković, Danijel; Bondarenko, Oleksandr

Peak Current Control of Battery-Supercapacitor Hybrid Energy Storage // Proceedings of the 2020 IEEE KhPI Week on Advanced Technology (KhPI Week)
Kharkiv, Ukrajina, 2020. 100, 6 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

600.

Stunjek, Goran; Pfeifer, Antun; Krajačić, Goran; Duić, Neven

Analysis of the Water—Power Nexus of the Balkan Peninsula Power System // Springer Proceedings in Energy
Brašov, Rumunjska: Springer, 2020. str. 235-257 doi:10.1007/978-3-030-55757-7_17 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

doi

601.

Bošnjaković, Mladen; Veljić, Nataša; Soldan, Christian

INFLUENCE OF MOISTURE CONTENT IN WOOD CHIPS ON THE BOILER OPERATION // Proceedings 2020 / Katalinić, Branko (ur.).
Požega: Veleučilište u Požegi, 2020. str. 0091-0101 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

602.

Jovanović, Juraj; Smajić, Selver; Beljo Lučić, Ružica

INFLUENCE OF DIFFERENT MACHINING ON THE SURFACE ROUGHNESS OF BEECH WOOD SAMPLES // SUSTAINABILITY OF FOREST-BASED INDUSTRIES IN THE GLOBAL ECONOMY / Jelačić, Denis (ur.).
Zagreb: WoodEMA, i.a. - International Association for Economics and Management in Wood Processing and Furniture Manufacturing ; University of Zagreb ; Faculty of Forestry ; Competance Centre, Ltd., 2020. str. 355- (predavanje, recenziran, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

603.

Stoilova, Anamarija; Barbir, Frano; Penga, Željko; Pivac, Ivan

Local Temperature Estimation in PEM Fuel Cell // Proceedings SpliTech 2020
Split, Hrvatska, 2020. str. 1-6 (predavanje, domaća recenzija, cjeloviti rad (in extenso), znanstveni)

604.

Mihanović, Luka; Penga, Jure; Penga, Željko; Radica, Gojmir

Computational Fluid Dynamics Analysis and Experimental Validation of Propeller Flow // Proceedings SpliTech 2020
Split, Hrvatska, 2020. str. 1-6 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

605.

Sedlar, Damir; Lozina, Zeljan; Bartulovic, Andela

Time integration methods for flexible pendulum with slider // 5th International Conference on Smart and Sustainable Technologies
Split, 2020. 1570636777, 6 doi:10.23919/SpliTech49282.2020.9243786 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

doi

606.

Lozina, Željan; Sedlar, Damir; Bartulovic, Andela

Evaluation of the transient problem integration in vicinity of resonance // 5th International Conference on Smart and Sustainable Technologies
Split, 2020. 1570637450, 4 doi:10.23919/SpliTech49282.2020.9243802 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

doi

607.

Poór, Peter; Trstenjak, Maja; Basl, Josef

Maintenance Ideal Model in Industry 4.0 – A Transformation Strategy Roadmap to Readiness Factor Calculation // HRADEC ECONOMIC DAYS 2020, VOL 10, PT 1
Hradec Králové, Češka Republika: University of Hradec Kralove, 2020. str. 642-648 doi:10.36689/uhk/hed/2020-01-073 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

doi

608.

Sutlović, Ana; Vojnović, Branka; Sutlović, Igor

Textile dye-house wastewater // Proceedings of 11th international natural gas, heat and water conference / Raos, Pero (ur.).
Osijek: Sveučilište u Slavonskom Brodu, 2020. str. 9-15 (pozvano predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

609.

Šarić, Tomislav; Šimunović, Goran; Stojkov, Marinko; Šarić, Dorotea; Havrlišan, Sara

Korištenje neuronskih mreža za analizu energetske učinkovitosti zgrada // PLIN 2020 - ZBORNIK RADOVA 11. MEĐUNARODNOG SKUPA O PRIRODNOM PLINU, TOPLINI I VODI / Pero RAOS, glavni urednik ; Tomislav GALETA ; Dražan KOZAK ; Marija RAOS ; Josip STOJŠIĆ ; Igor SUTLOVIĆ ; Zlatko TONKOVIĆ (ur.).
Osijek: Sveučilište u Slavonskom Brodu, 2020. str. 75-84 (predavanje, domaća recenzija, cjeloviti rad (in extenso), znanstveni)

610.

Grizelj, Branko; Rešković, Stoja; Marić, Dejan; Duspara, Miroslav; Brlić, Tin; Vuletić, Katica; Putnik, Ivan

Some influences on the mechanical properties of steel // Plin 2020 / Pero RAOS, glavni urednik Tomislav GALETA Dražan KOZAK Marija RAOS Josip STOJŠIĆ Igor SUTLOVIĆ Zlatko TONKOVIĆ (ur.).
Osijek: Sveučilište u Slavonskom Brodu, 2020. str. 224-235 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

611.

Smoljan, Božo; Iljkić, Dario; Hajdek, Krunoslav; Sitek, Wojciech

Computer Simulation of Thermal Processing of Steel // IOP Conference Series: Materials Science and Engineering, Vol.916 / Nedelcu, Dumitru (ur.).
Iași, 2020. 012106, 10 doi:10.1088/1757-899X/916/1/012106 (plenarno, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

doi iopscience.iop.org

612.

Soldo, Jure; Škugor, Branimir; Deur, Joško

Analysis of Patterns of Optimal Battery State- of-Charge Trajectories for Blended Regime of a Parallel Plug-in Hybrid Electric Vehicle and a Wide Range of Driving Conditions // 15th Conference on Sustainable Development of Energy, Water and Environment Systems (SDEWES 2020)
Köln, Njemačka; online, 2020. str. 1-13 (predavanje, cjeloviti rad (in extenso), znanstveni)

613.

Hihlik, Mislav; Topić, Jakov; Škugor, Branimir; Deur, Joško

Neural Network-based Prediction of Fuel Consumption of a Conventional Delivery Vehicle based on GPS-collected Tracking Data // 15th Conference on Sustainable Development of Energy, Water and Environment Systems (SDEWES 2020)
Köln, Njemačka; online, 2020. str. 1-24 (predavanje, cjeloviti rad (in extenso), znanstveni)

614.

Jukić, Perica; Guzović, Zvonimir

Increase of Efficiency of a Heat Supply Steam Turbine by Integrating RES: A Study Analysis of T-100/120-130-3 Steam Turbine installed in TE-TO Zagreb District Heating Plant // 15th SEE Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES
Köln, Njemačka, 2020. str. 1-23 (predavanje, cjeloviti rad (in extenso), znanstveni)

615.

Stančin, Hrvoje; Mikulčić, Hrvoje; Manić, Nebojša; Stojiljiković, Dragoslava, Wang, Xuebin; Duić, Neven

Thermogravimetric and Kinetic Analysis of Biomass and Polyurethane Foam Mixtures Co-Pyrolysis // Proceedings of the 23rd Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction / Petar S. Varbanov ; Jiří J. Klemeš ; Panos Seferlis ; Ting Ma ; Yee Van Fan ; Xuexiu Jia ; Xue-Chao Wang ; Hon Huin Chin (ur.).
Xi'an: PRES, 2020. str. 1-8 (ostalo, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

616.

Stančin, Hrvoje; Šafar, Michal; Ružičkova, Jana; Mikulčić, Hrvoje; Raclavska, Helena

Upgrading the Biomass Pyrolysis Prodcuts by Waste Plastic Materials // Digital Proceedings of 4th South East European Conference on Sustainable Development of Energy, Water and Environment Systems - SEE SDEWES / Ban, Marko (ur.).
Zagreb: SDEWES Centre, 2020. str. 64-64 (ostalo, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

617.

Pavković, Danijel; Krznar, Matija; Cipek, Mihael; Zorc, Davor; Trstenjak, Maja

Internal Combustion Engine Control System Design Suitable for Hybrid Propulsion Applications // Proceedings of the ICUAS 2020 conference
Atena, Grčka, 2020. str. 1614-1619 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

618.

Krznar, Matija; Pavković, Danijel; Kozhushko, Yuliia; Cipek, Mihael; Zorc, Davor; Crneković, Mladen

Control System Design for Hybrid Power Supply of an Unmanned Aerial Vehicle Based on Linearized Averaged Process Models // Proceedings of the ICUAS 2020 conference
Atena, 2020. str. 582-587 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

619.

Majer, Siniša; Tuković, Željko

Numerical Study of Windage Power Loss for One Salient Pole Hydro Generator // Proceedings of the 2020 International Conference on Electrical Machines (ICEM), 2020, 23-26 August
online: The Institute of Electrical and Electronics Engineers (IEEE), 2020. str. 2624-2630 doi:10.1109/ICEM49940.2020.9270962 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

doi ieeexplore.ieee.org

620.

Idrissov, Agzam; Škec, Stanko; Maier, Anja M.

Understanding system features through information visualisations to improve product development: An exploratory study with data analysts // Proceedings of NordDesign 2020 / Mortensen, N.H. ; Hansen, C.T. ; Deininger, M. (ur.).
online: The Design Society, 2020. str. 1-12 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

621.

Batistić, Ivan; Tuković, Željko; Cardiff, Philip

A SEGMENT-TO-SEGMENT ALGORITHM FOR FINITE VOLUME MECHANICHAL CONTACT SIMULATIONS // The 15th OpenFOAM Workshop
Washington D.C., Sjedinjene Američke Države, 2020. (predavanje, cjeloviti rad (in extenso), znanstveni)

www.cpe.vt.edu

622.

Batistić, Ivan; Tuković, Željko; Cardiff, Philip; De Jaeger, Peter

Nagata patch interpolation for finite volume mechanical contact simulations // TECHNICAL SCIENCES. INDUSTRIAL MANAGEMENT
Borovec, Bugarska, 2020. str. 35-38 (predavanje, podatak o recenziji nije dostupan, cjeloviti rad (in extenso), znanstveni)

youngconference.com stumejournals.com

623.

Kozhushko, Yuliia; Pavković, Danijel; Karbivska, Tetiana; Safronov, Pavlo; Bondarenko, Oleksandr

Robust Control of Battery-Supercapacitor Energy Storage System Using Kharitonov Theorem // Proceedings of the 14th International Conference on Compatibility, Power Electronics and Power Engineering (IEEE CPE POWERENG 2020) / Pereira, Pedro ; Monteiro, Vitor (ur.).
Setúbal: Institute of Electrical and Electronics Engineers (IEEE), 2020. str. 550-555 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

624.

Dorotić, Hrvoje; Pukšec, Tomislav; Schneider, Daniel Rolph

Evaluation of District Heating with Regard to Individual Systems – Analysis of Carbon and Cost Allocation in Cogeneration Units // Digital Proceedings of 4th South East European Conference on Sustainable Development of Energy, Water and Environment Systems / Ban, Marko (ur.).
Zagreb, 2020. 0042-1, 22 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

625.

Barbieri, Gabriel; da Silva, Luciano Santos; Duarte, Lauren; Roldo, Liane; Silva, Fabio Pinto

Avaliação do Acabamento Superficial de Mármores Usinados a Seco por Ferramenta de Aço Rápido e Ferramenta Diamantada // III Congresso Internacional e IX Workshop Design & Materiais / Vargas, Luiz F. ; Fernandes, Malerba ; Ribeiro, Rosinei B. ; Domingos, Bianca S. M. (ur.).
Lorena, Brazil: Gráfica Santa Tereza, 2020. str. 360-371 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

626.

Tomić, Tihomir; Schneider, Daniel Rolph

Overview of Sustainability of Technologies for Thermochemical Recovery of Plastic Waste From the Sustainable Economy Development Point of View // Digital Proceedings of the 4th South East European Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES / Ban, Marko (ur.).
Zagreb, 2020. 303, 30 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

627.

Tomić, Tihomir; Kremer, Irma; Schneider, Daniel Rolph

Environmental and Economic Sustainability of Waste Management Systems Based on Different Recovery Technologies – Legislative and Socio- Economic Influence on Perception of Technologies // Digital Proceedings of the 4th South East European Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES / Ban, Marko (ur.).
Zagreb: Fakultet strojarstva i brodogradnje Sveučilišta u Zagrebu, 2020. 116, 22 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

628.

Trstenjak, Maja; Opetuk, Tihomir; Pavković, Danijel; Zorc, Davor

Sustainability and Industry 4.0 - overview of driving forces and barriers // Digital proceedings of 4th South East Europe (SEE) Sustainable Development of Energy Water and Environment Systems (SDEWES) conference / Ban, Marko (ur.).
Sarajevo, Bosna i Hercegovina, 2020. 0064, 12 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

629.

Lovrak, Ana; Pukšec, Tomislav

Assessment of seasonal variation of biogas potential from industrial residues and by-products // Digital Proceedings of the 4th South East European Conference on Sustainable Development of Energy, Water and Environment Systems-SDEWES / Ban, Marko (ur.).
Zagreb, 2020. 0086, 9 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

630.

Klun, Mario; Guzović, Zvonimir; Rašković, Predrag

Innovative Type of Micro-Turbine for Organic Rankine Cycle (ORC) on Internal Combustion Engine (ICE) Waste Heat // Digital Proceedings of The 4th SDEWES SEE Conference / Ban, Marko ; Duić, Neven ; Guzović, Zvonimir ; et. al. (ur.).
Zagreb: Fakultet strojarstva i brodogradnje Sveučilišta u Zagrebu, 2020. str. 1-15 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

631.

Pfeifer, Antun; Pavičević, Matija; Quoilin, Sylvain; Schneider, Daniel Rolph

Role of Power to Heat Systems in Energy Transition: Case Study of South East Europe // Digital Proceedings of the 4th South East European Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES / Ban, Marko (ur.).
Zagreb, 2020. 0026, 23 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

632.

Bedoić, Robert; Schneider, Daniel Rolph; Čuček, Lidija; Ćosić, Boris; Dorotić, Hrvoje; Pukšec, Tomislav

From food waste and renewable electricity to renewable gas – A study on advanced biogas plant operation // Digital Proceedings of the 4th SEE Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES / Ban, Marko (ur.).
Sarajevo, Bosna i Hercegovina, 2020. 0039, 16 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

633.

Bazina, Tomislav; Zelenika, Saša; Kamenar, Ervin; Schnurrer-Luke-Vrbanić, Tea

Critical validation of design strategies for a compact upper limb mechatronics rehabilitation device // Proceedings of the 20th international conference of the EUSPEN - European society for precision engineering and nanotechnology / Leach, R. K. ; Billington, D. ; Nisbet, C. ; Phillips, D. (ur.).
online: EUSPEN, 2020. 71, 72 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

634.

Gljušćić, Petar; Zelenika, Saša

Assessment of performances of optimized piezoelectric energy harvesters for wearables // Proceedings of the 20th international conference of the EUSPEN - European society for precision engineering and nanotechnology / Leach, R. K. ; Billington, D. ; Nisbet, C. ; Phillips, D. (ur.).
online: EUSPEN, 2020. str. 49-52 (plenarno, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

635.

Jurić, Filip; Vujanović, Milan; Coelho, Pedro J.; Petranović, Zvonimir; Priesching, Peter

Implementation of the Spectral-Line based Weighted-Sum-of-Grey-Gases Model in the Finite Volume Method for Accurate Modelling of Radiation in Internal Combustion Engines // Digital Proceedings of 4th South East European Conference on Sustainable Development of Energy, Water and Environment Systems - SEE SDEWES / Ban, Marko (ur.).
Zagreb: SDEWES Centre, 2020. SEE.SDEWES2020.0038, 15 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

636.

Stipić, Marija; Jurić, Filip; Vujanović, Milan

Numerical Modelling of Multiphase Reactive Processes and Pollutant Formation Using Flamelet Generated Manifold Approach and Coherent Flame Combustion Model // Digital Proceedings of the 2nd Latin American Conference on Sustainable Development of Energy, Water and Environment Systems Buenos Aires - LA SDEWES / Ban, Marko (ur.).
Zagreb: Fakultet strojarstva i brodogradnje Sveučilišta u Zagrebu, 2020. LA.SDEWES2020-0211, 22 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

637.

Bešenić, Tibor; Baleta, Jakov; Vujanović, Milan; Pachler, Klaus

Modelling of the Spray Absorption for Wet Flue Gas Desulfurisation // Digital Proceedings of 4th South East European Conference on Sustainable Development of Energy, Water and Environment Systems - SEE SDEWES / Ban, Marko et al. (ur.).
Zagreb: Fakultet strojarstva i brodogradnje Sveučilišta u Zagrebu, 2020. 2020.0140, 19 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

638.

Cerinski, Damijan; Baleta, Jakov; Ferreiro, Ana Isabel; Costa, Mário; Zimbardi, Francesco; Cerone, Nadia; Wang, Jin

Modelling the syngas composition in a pilot-scale biomass updraft gasifier // Digital Proceedings of 4th South East European Conference on Sustainable Development of Energy, Water and Environment Systems - SEE SDEWES / Ban, Marko (ur.).
Zagreb: Fakultet strojarstva i brodogradnje Sveučilišta u Zagrebu, 2020. SEE.SDEWES2020.0006, 14 (predavanje, cjeloviti rad (in extenso), znanstveni)

639.

Baleta, Jakov; Mikulčić, Hrvoje; Wang, Jin; Wang, Xuebin; Wang, Fan; Qi, Fengsheng

Comparison of ammonia combustion reduced chemical kinetic models by means of numerical simulation // Digital Proceedings of 4th South East European Conference on Sustainable Development of Energy, Water and Environment Systems - SEE SDEWES / Ban, Marko et al. (ur.).
Zagreb: Fakultet strojarstva i brodogradnje Sveučilišta u Zagrebu, 2020. 2020.0133, 11 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

640.

Krznar, Matija; Pavković, Danijel; Cipek, Mihael; Crneković, Mladen; Zorc, Davor

Design of a low-cost DC/DC Converter Power Distribution System for a Hybrid Power Unit of the Multirotor Unamnned Aerial Vheicle // Digital proceedings of 4th South East Europe (SEE) Sustainable Development of Energy Water and Environment Systems (SDEWES) conference / Ban, Marko (ur.).
Sarajevo, Bosna i Hercegovina, 2020. str. 1-18 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

641.

Krznar, Matija; Pavković, Danijel; Kozhushko, Yuliia; Cipek, Mihael; Zorc, Davor

Generator Set Control System Design for Unmanned Aerial Vehicle Hybrid Propulsion // Digital proceedings of 4th South East Europe (SEE) Sustainable Development of Energy Water and Environment Systems (SDEWES) conference / Ban, Marko (ur.).
Sarajevo, Bosna i Hercegovina, 2020. str. 1-18 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

642.

Cipek, Mihael; Pavković, Danijel; Kljaić, Zdenko; Mlinarić, Tomislav Josip

Hypothetical Conversion and Modernization of a Conventional Heavy Haul Diesel-electric Locomotive to its Battery Counterpart // Digital proceedings of 4th South East Europe (SEE) Sustainable Development of Energy Water and Environment Systems (SDEWES) conference / Ban, Marko (ur.).
Sarajevo, Bosna i Hercegovina, 2020. 0151, 18 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

www.sarajevo2020.sdewes.org

643.

Karlušić, Juraj; Cipek, Mihael; Pavković, Danijel; Šitum, Željko; Benić, Juraj; Šušnjar, Marijan

Benefit Assessment of Skidder Power-train Hybridization // Digital proceedings of 4th South East Europe (SEE) Sustainable Development of Energy Water and Environment Systems (SDEWES) conference / Ban, Marko (ur.).
Sarajevo, Bosna i Hercegovina, 2020. str. 1-27 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

644.

Baleta, Jakov; Lazić, Ladislav; Pavlović, Dominik; Cerinski, Damijan

NUMERICAL ANALYSIS OF THE INDUSTRIAL POLLUTANTS DISPERSION IN URBAN AREA // Proceedings / 28th International Conference Ecological Truth and Environmental Research - EcoTER'20 / Šerbula, Snežana (ur.).
Bor: University of Belgrade, Technical Faculty in Bor, 2020. str. 100-105 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

645.

Prpić-Oršić, Jasna; Mrzljak, Vedran; Baressi Šegota, Sandi; Lorencin, Ivan

Solver parameter influence on the results of multilayer perceptron for estimating power output of a combined cycle power plant // V INTERNATIONAL SCIENTIFIC CONFERENCE - SUMMER SESSION - INDUSTRY 4.0 - 2020 - PROCEEDINGS / Popov, Georgi ; Ovtcharova, Jivka (ur.).
Sofija: Scientific technical union of mechanical engineering “Industry - 4.0”, 2020. str. 8-11 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada industry-4.eu industry-4.eu

646.

Mrzljak, Vedran; Prpić-Oršić, Jasna; Medica- Viola, Vedran; Anđelić, Nikola

The change in energy flow streams for main marine propulsion steam turbine at different loads // XXVIII INTERNATIONAL SCIENTIFIC CONFERENCE - Trans & MOTAUTO 2020 - PROCEEDINGS / Kolev, Petar (ur.).
Sofija: Scientific technical union of mechanical engineering “Industry - 4.0”, 2020. str. 8-11 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada trans-motauto.com trans-motauto.com

647.

Borgue, Olivia; Valjak, Filip; Panarotto, Massimo; Isaksson, Ola

Supporting additive manufacturing technology development through constraint modelling in early conceptual design: A satellite propulsion case study // Proceedings of the Design Society: DESIGN Conference
Dubrovnik, Hrvatska: Cambridge University Press, 2020. str. 817-826 doi:10.1017/dsd.2020.289 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

doi www.cambridge.org

648.

Valjak, Filip; Bojčetić, Nenad; Nordin, Axel; Godec, Damir

Conceptual design for additive manufacturing: An explorative study // Proceedings of the Design Society: DESIGN Conference
Dubrovnik, Hrvatska: Cambridge University Press, 2020. str. 441-450 doi:10.1017/dsd.2020.307 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

doi www.cambridge.org

649.

Horvat, Nikola; Škec, Stanko; Martinec, Tomislav; Lukačević, Fanika; Perišić, Marija Majda

Identifying the effect of reviewers' expertise on design review using virtual reality and desktop interface // Proceedings of the Design Society: DESIGN Conference
Dubrovnik, Hrvatska: Cambridge University Press, 2020. str. 187-196 doi:10.1017/dsd.2020.304 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

doi www.cambridge.org

650.

Becattini, Niccolo; Škec, Stanko; Pavković, Neven; Cascini, Gaetano

E-Learning Infrastructure Prototype for Geographically Distributed Project-Based Learning // Proceedings of the Design Society: DESIGN Conference
Dubrovnik, Hrvatska, 2020. str. 1667-1676 doi:10.1017/dsd.2020.282 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

doi doi.org

651.

Idrissov, Agzam; Škec, Stanko; Maier, Anja M.

Visualising Systems: Mapping System Features and Interactive Information Visualisations in Design // Proceedings of the Design Society: DESIGN Conference
Dubrovnik, Hrvatska, 2020. str. 2295-2304 doi:10.1017/dsd.2020.138 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

doi doi.org

652.

Miler, Daniel; Hoić, Matija; Žeželj, Dragan

Optimisation of welded beams: How cost functions affect the results // Proceedings of the Design Society: DESIGN Conference
Dubrovnik, Hrvatska: Cambridge University Press (CUP), 2020. str. 2531-2540 doi:10.1017/dsd.2020.44 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada doi www.cambridge.org

653.

Batista, Josip; Lenić, Kristian; Trp, Anica; Torbarina, Fran

A comparison study of sensible and latent thermal energy storage used in domestic hot water solar heating system // Proceedings of the 14th International Renewable Energy Storage Conference (IRES2020)
Düsseldorf, Njemačka: Atlantis Press, 2020. str. - doi:10.2991/ahe.k.210202.029 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

doi www.eurosolar.de www.atlantis-press.com

654.

Mrzljak, Vedran; Prpić-Oršić, Jasna; Musulin, Jelena; Štifanić, Daniel

Energy and exergy analysis of deaerator from combined-cycle power plant // INTERNATIONAL SCIENTIFIC CONFERENCE TECHNICS. TECHNOLOGIES. EDUCATION. SAFETY, 2020 - PROCEEDINGS - VOLUME 1 - TECHNICS AND TECHNOLOGY. INFORMATION TECHNOLOGY / Tokarev, Alexander (ur.).
Sofija: Scientific technical union of mechanical engineering “Industry - 4.0”, 2020. str. 5-8 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada techtos.net techtos.net

655.

Trstenjak, Maja; Opetuk, Tihomir; Pavković, Danijel; Zorc, Davor

Industry 4.0 in Croatia – Perspective and Industrial Familiarity with the (New) Digital Concept // Proceedings of 5th International Conference on the Industry 4.0 Model for Advanced Manufacturing / Wang, Lihui ; Majstorovic, Vidosav D. ; Mourtzis, Dimitris ; Carpanzano, Emanuele ; Moroni, Giovanni ; Galantucci, Luigi M. (ur.).
Cham: Springer, 2020. str. 345-355 doi:10.1007/978-3-030-46212-3_26 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

doi link.springer.com

656.

Macháček, Michael; Pospíšil, Stanislav; Kozmar, Hrvoje

Scaling of wind turbine aerodynamics: wind tunnel experiments // MATEC Web of Conferences 313, 00053 (2020) / Melcer, J. ; Kotrasová, K. ; Major I. ; Benin, A.V. (ur.).
Vyhne: EDP Sciences, 2020. str. 1-7 doi:10.1051/matecconf/202031300053 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada doi www.matec-conferences.org

657.

Cvok, Ivan; Ratković, Igor; Deur, Joško;

Optimization of Control Parameters of Vehicle Air-Conditioning System for Maximum Efficiency // SAE Technical Paper 2020-01-1242
Detroit (MI), Sjedinjene Američke Države, 2020. 2020-01-1242, 10 doi:10.4271/2020-01-1242 (ostalo, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

doi saemobilus.sae.org

658.

Zhang, Yijing; Fujii, Yuji; Hippalgaonkar, Rohit; Cvok, Ivan; Ivanovic, Vladimir; Deur, Joško; Ranogajec, Vanja;

Mathematical Analysis of Clutch Thermal Energy during Automatic Shifting Coupled with Input Torque Truncation // SAE Technical Paper 2020-01-0967
Detroit (MI), Sjedinjene Američke Države, 2020. 2020-01-0967, 7 doi:10.4271/2020-01-0967 (ostalo, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

doi saemobilus.sae.org

659.

Bedoić, Robert; Smoljanić, Goran; Ljubas, Davor; Čuček, Lidija; Ćosić, Boris; Pukšec, Tomislav

Life Cycle Assessment of Biogas and Digestate from Residue Grass: Analysis of Different Utilisation Pathways // Digital Proceedings of the 2nd Latin American Conference on Sustainable Development of Energy, Water and Environment Systems / Duić, Neven et al. (ur.).
Buenos Aires, Argentina: SDEWES, 2020. LA.SDEWES2020.0162, 9 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

660.

Mrzljak, Vedran; Prpić-Oršić, Jasna; Poljak, Igor; Baressi Šegota, Sandi

Exergy analysis of steam condenser at various loads during the ambient temperature change // INTERNATIONAL SCIENTIFIC CONFERENCE MACHINES. TECHNOLOGIES. MATERIALS 2020 - Winter Session - PROCEEDINGS / Popov, Georgi ; Dikova, Tsanka (ur.).
Sofija: Scientific technical union of mechanical engineering “Industry-4.0”, 2020. str. 14-17 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada mtmcongress.com mtmcongress.com

661.

Mrzljak, Vedran; Prpić-Oršić, Jasna; Lorencin, Ivan; Anđelić, Nikola

Thermodynamic analysis of three-cylinder steam turbine from combined cycle power plant // INTERNATIONAL CONFERENCE TECHNICAL SCIENCES. INDUSTRIAL MANAGEMENT 2020 - PROCEEDINGS / Angelov, Cyril (ur.).
Sofija: Scientific technical union of mechanical engineering “Industry-4.0”, 2020. str. 23-26 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada youngconference.com youngconference.com

662.

Mrzljak, Vedran; Baressi Šegota, Sandi; Kocijel, Lino; Prpić-Oršić, Jasna

Energy (isentropic) analysis of three-cylinder steam turbine with re-heating // INTERNATIONAL SCIENTIFIC CONFERENCE HIGH TECHNOLOGIES. BUSINESS. SOCIETY 2020 - VOLUME I “HIGH TECHNOLOGIES” - PROCEEDINGS / Popov, Georgi ; Stavrev, Dimitar (ur.).
Sofija: Scientific technical union of mechanical engineering “Industry-4.0”, 2020. str. 29-32 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada hightechsociety.eu hightechsociety.eu

663.

Trzun, Zvonko; Andrić, Marijan; Vrdoljak, Milan

Using a 3D Model to Asses Projectile's Impact Points Deviation Due to Manufacturing Errors // INTELLIGENT MANUFACTURING AND AUTOMATION. INTERNATIONAL DAAAM SYMPOSIUM. 30TH 2019. (2 VOLS) / Katalinic, Branko (ur.).
Beč: Danube Adria Association for Automation and Manufacturing ( DAAAM ), 2020. str. 791-799 doi:10.2507/30th.daaam.proceedings.110 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada doi daaam.info

664.

Cvok, Ivan; Deur, Joško; Tseng, Eric; Hrovat, Davor

Analysis of active suspension performance improvement based on introducing front/rear LQ control coupling // Advances in Dynamics of Vehicles on Roads and Tracks Proceedings of the 26th Symposium of the International Association of Vehicle System Dynamics, IAVSD 2019, August 12-16, 2019, Gothenburg, Sweden / Klomp, Matthijs ; Bruzelius, Fredrik ; Nielsen, Jens ; Hillemyr, Angela (ur.).
Cham: Springer, 2020. str. 1829-1839 doi:10.1007/978-3-030-38077-9_208 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

doi

665.

Cvok, Ivan; Deur, Joško; Tseng, Eric; Hrovat, Davor

Comparative Performance Analysis of Active and Semi-active Suspensions with Road Preview Control // Advances in Dynamics of Vehicles on Roads and Tracks: Proceedings of the 26th Symposium of the International Association of Vehicle System Dynamics, IAVSD 2019, August 12-16, 2019 / Klomp, Matthijs ; Bruzelius, Fredrik ; Nielsen, Jens ; Hillemyr, Angela (ur.).
Cham: Springer, 2020. str. 1808-1818 doi:10.1007/978-3-030-38077-9_206 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

doi

666.

Mihalic Pokopec, Ivana; Mance, Ines; Cesarec, Davor; Bauer, Branko

PERMANENT MOULD CASTING OF ALUMINIUM ALLOY FORK // 18th INTERNATIONAL FOUNDRYMEN CONFERENCE
Sisak, Hrvatska, 2019. str. 308-321 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

667.

Mrvar, Primož; Kastelic, Sebastjan; Gorše, Grega; Bauer, Branko; Petrič, Mitja

POSSIBILITIES FOR PROVIDING OF UNIDIRECTIONAL SOLIDIFICATION OF COMPLEX CASTINGS IN THE TECHNOLOGY OF HIGH-PRESSURE DIE-CASTING // 18th INTERNATIONAL FOUNDRYMEN CONFERENCE
Sisak, Hrvatska, 2019. str. 57-68 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

668.

Mijalić, Nikola

Validation of the rans turbulence model for cfd simulations of the Francis turbine // eyec Monograph
Varšava, Poljska, 2019. str. 193-201 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

www.eyec.ichip.pw.edu.pl

669.

Budim, Ružica; Maljković, Danica

Implementation of Energy Efficiency Directive in the Republic of Croatia legislation // SimTerm 2019 PROCEEDINGS / Laković-Paunović, Mirjana ; Stojiljiković, Mladen (ur.).
Niš: Faculty of Mechanical Engineering in Niš, Department of Thermal Engineering and Society of Thermal Engineers of Serbia, 2019. str. 98-105 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

670.

Maljković, Danica; Budim, Ružica

Everyone Will Save – Modelling the Best Allocation Model for Consumers in District Heating // Book of abstracts / Mudrovčić, A. ; Ban, M. (ur.).
Zagreb: Fakultet strojarstva i brodogradnje Sveučilišta u Zagrebu, 2019. str. 361-361 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

www.dubrovnik2019.sdewes.org

671.

Pustički, Daniel; Schauperl, Zdravko; Alar, Željko

PRODUCTION AND TESTING OF AL/CU SAMPLES OBTAINED BY POWDER METALLURGY // MTECH 2019 Zbornik radova / Markučić, Damir ; Stojanović, Ivan ; Mihaljević, Morana ; Kezele, Tomislav (ur.).
Zagreb: Hrvatsko društvo za materijale i tribologiju (HDMT), 2019. str. 279-286 (predavanje, domaća recenzija, cjeloviti rad (in extenso), znanstveni)

672.

Ranilović, Borjan; Grozdek, Marino

Phase change materials as passive overheating protection in solar collectors // Proceedings of the 25th INTERNATIONAL CONFERENCE INTERKLIMA 2019 and 14th CONFERENCE ON THERMOGRAPHY
Zagreb, 2019. str. 106-114 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

673.

Pudić, Dalibor

THE SIGNIFICANCE OF ENERGY POVERTY FOR THE FUTURE DEVELOPMENT OF CROATIAN ECONOMY // 8th INTERNATIONAL SCIENTIFIC SYMPOSIUM ECONOMY OF EASTERN CROATIA – VISION AND GROWTH / Leko Šimić, Mirna ; Crnković, Boris (ur.).
Osijek: Ekonomski fakultet Sveučilišta Josipa Jurja Strossmayera u Osijeku, 2019. str. 131-139 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

674.

Pudić, Dalibor; Grozdanić, Igor; Dojčinović, Zoran

THE ROLE OF TRANSPORT DECARBONIZATION IN THE CROATIAN ECONOMY AND TOURISM // 46th International Scientific Conference on Economic and Social Development – "Sustainable Tourist Destinations" / Milković, Marin ; Keček, Damira ; Hammes, Khalid (ur.).
Varaždin: Varazdin Development and Entrepreneurship Agency, Varazdin, Croatia / University North, Koprivnica, Croatia / Faculty of Management University of Warsaw, Warsaw, Poland / Faculty of Law, Economics and Social Sciences Sale - Mohammed V University in Rabat, Morocco, 2019. str. 361-367 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

675.

Kozarac, Darko; Sremec, Mario; Vučetić, Ante; Božić, Mladen

Improving the Low Load Operation of a Dual-Fuel Diesel/Natural Gas Engine by Premixing the Diesel Fuel // Proceedings of 2019 JSAE/SAE Powertrains Fuels and Lubricants International Meeting
Kyoto: SAE, 2019. str. 1-12 doi:.org/10.4271/2019-01-2174 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

doi www.sae.org

Pregled po znanstvenom području: Strojarstvo (MB: 2.11)

Radovi u zbornicima skupova

Znanstveni radovi u zbornicima skupova