Pregled po znanstvenom području: Strojarstvo (MB: 2.11)

2748.

Marunić, Gordana

Web Deformation Related to Parameters of Gear Structure // Machine Design (Novi Sad), 4 (2012), 3; 161-166 (podatak o recenziji nije dostupan, članak, znanstveni)

2749.

Vukčević, Vuko; Werner, Andreja; Degiuli, Nastia

Application of smoothed particle hydrodynamics method for simulating incompressible laminar flow // Transactions of FAMENA, 36 (2012), 4; 1-12 (međunarodna recenzija, članak, znanstveni)

famena.fsb.unizg.hr

2750.

Marenic, Eduard; Sorić, Jurica; Ibrahimbegovic, Adnan

Adaptive modelling in atomistic-to-continuum multiscale methods // Journal of the Serbian Society for Computational Mechanics, 6(1) (2012), 169-198 (međunarodna recenzija, članak, znanstveni)

2751.

Vetma, Vladimir; Kulenović, Zlatan; Antonić, Radovan; Tomas, Vinko

Optimiziranje brodskog vijka s konstantnim usponom // Pomorstvo : scientific journal of maritime research, 26 (2012), 2; 375-396 (međunarodna recenzija, pregledni rad, znanstveni)

2752.

Mihalić, Tihomir; Andrej, Predin; Mustapić, Nenad

CFD investigation of the pressure distribution in centrifugal vortex impellers // Journal of energy technology, 5 (2012), 4; 19-26 (podatak o recenziji nije dostupan, članak, znanstveni)

2753.

Tihomir, Mihalić; Andrej, Predin; Nenad, Mustapić

CFD investigation of the pressure distribution in centrifugal vortex impellers // Journal of energy technology, 5 (2012), 4; 19-26 (podatak o recenziji nije dostupan, članak, znanstveni)

2754.

Čikić, Ante; Pavković, Branimir; Vrhovski, Zoran

Dynamic Appearances and Effects of Heat Source at Sawn Timber Drying // Strojarstvo, 54 (2012), 1; 71-78 (podatak o recenziji nije dostupan, prethodno priopćenje, znanstveni)

hrcak.srce.hr hrcak.srce.hr

2755.

Jurkovic, Zoran; Perinic, Mladen; Maricic, Sven; Sekulic, Milenko; Mandic, Vesna

Application of Modelling and Optimization Methods in Abrasive Water Jet Machining // Journal of trends in the development of machinery and associated technology, 16 (2012), 1; 59-62 (podatak o recenziji nije dostupan, članak, znanstveni)

Pristup cjelovitom tekstu rada www.tmt.unze.ba

2756.

Zvizdić, Davor; Heinonen, Martti; Šestan, Danijel

New Primary Dew-Point Generators at HMI/FSB-LPM in the Range from −70 ◦C to +60 ◦C // International journal of thermophysics, 33 (2012), 8/9; 1536-1549 doi:10.1007/s10765-012-1211-3 (međunarodna recenzija, članak, znanstveni)

doi link.springer.com

2757.

Senčić, Tomislav; Račić, Nikola; Franković, Bernard

Influence of Low-Speed Marine Diesel Engine Settings on Waste Heat Availability // Brodogradnja, 63 (2012), 4; 329-335 (podatak o recenziji nije dostupan, članak, znanstveni)

2758.

Hloch, Sergej; Valiček, Jan; Samardžić, Ivan; Kozak, Dražan; Kušnerova, Milena

Classification of technical materials according to classes machinability for hydroabrasive cutting // METALURGIJA, 51 (2012), 1; 125-128 (međunarodna recenzija, pregledni rad, znanstveni)

public.carnet.hr

2759.

Stojkov, Marinko; Atić, Mirza; Softić, Amir

Application of fuzzy logic for reactive power compensation by synchronous motors with variable load // Tehnicki Vjesnik-Technical Gazette, 19 (2012), 4; 753-758 (međunarodna recenzija, članak, znanstveni)

2760.

Lisjak, Dragutin; Marić, Gojko; Štefanić, Nedeljko

Studying the possibility of neural network application in the diagnostics of a small four- stroke petrol engine by wear particle content // Tehnički vjesnik, 19 (2012), 4; 857-862 (međunarodna recenzija, članak, znanstveni)

2761.

Tomašić, Tomislav; Demetlika, Andrea; Crneković, Mladen

Self-balancing mobile robot Tilter // Transactions of FAMENA, 36 (2012), 3; 23-32 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada hrcak.srce.hr hrcak.srce.hr

2762.

Grilec, Krešimir; Bojanić, Vedran

Reproducibility of energy absorption properties of aluminium foams // Tehnički glasnik, 6 (2012), 2; 183-186 (podatak o recenziji nije dostupan, članak, znanstveni)

2763.

Žakula, Tea; Armstrong, Peter; Norford, Leslie

Optimal Coordination of Compressor, Fan and Pump Speeds Over a Wide Range of Conditions // HVAC & R research, 18 (2012), 6; 1153-1167 doi:10.1080/10789669.2012.713832 (međunarodna recenzija, članak, znanstveni)

doi www.tandfonline.com

2764.

Valentan, Bogdan; Pilipović, Ana; Brajlih, Tomaž; Sever, Peter; Pahole, Ivo; Ficko, Mirko; Balič, Jože; Drstvenšek, Igor

A fast method to predict the cooling time of wax for investment casting procedure // Advances ifn production engineering & practices, 7 (2012), 4; 255-263 (podatak o recenziji nije dostupan, članak, znanstveni)

maja.uni-mb.si

2765.

Jakopčić, Mirko; Grilec, Krešimir; Lisjak, Dragutin

Investigation of the material chemical composition influence on artillery weapons barrel hardness // Tehnicki Vjesnik-Technical Gazette, 19 (2012), 4; 893-898 (međunarodna recenzija, članak, znanstveni)

2766.

Kalambura, Sanja; Čikić, Ante; Dunđer, Marko

Research into Effects of Alcaline Hydrolysis of Animal Waste as Pre-treatment in Biogas Production // Strojarstvo, 54 (2012), 1; 19-24 (međunarodna recenzija, članak, znanstveni)

2767.

Jurković, Milan; Jurković, Zoran; Mandić, Vesna

Experimental Analysis and Mathematical Modelling of Rolling Force // Strojarstvo : časopis za teoriju i praksu u strojarstvu, 54 (2012), 2; 145-151 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada

2768.

Marušić, Vlatko; Samardžić, Ivan; Todorić, Petar; Rozing, Goran

Effects of Steel Cast GS30Mn5 Hardening Parameters on Dredger`s Sheave Edge Properties // Strojarstvo, 54 (2012), 1; 33-41 (međunarodna recenzija, članak, znanstveni)

2769.

Branko, Mateša; Ivan, Samardžić; Marko, Dunđer

Intergranular Corrosion of Dissimilar Austenitic Weld // Strojarstvo : časopis za teoriju i praksu u strojarstvu, 54 (2012), 1; 25-32 (međunarodna recenzija, članak, znanstveni)

2770.

Šoštarić, Damir; Žagar, Drago; Samardžić, Ivan

Influence of Electromagnetic Fields on Environment in TIG welding process // Strojarstvo, 54 (2012), 1; 51-61 (međunarodna recenzija, članak, znanstveni)

2771.

Valentan, Bogdan; Pogačar, Dušan; Brajlih, Tomaž; Zupančič Hartner, Tjaša; Pilipović, Ana; Drstvenšek, Igor

Development of a 3D printer for thermoplastic modelling // Materiali in tehnologije, 46 (2012), 6; 586-594 (međunarodna recenzija, članak, znanstveni)

mit.imt.si

2772.

Dović, Damir; Andrassy, Mladen

Numerically assisted analysis of ﬂat and orrugated plate solar collectors thermal performances // Solar energy, 86 (2012), 9; 2416-2431 doi:10.1016/j.solener.2012.05.016 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com dx.doi.org

2773.

Plančak, Miroslav; Movrin, Dejan; Vilotić, Dragiša; Car, Zlatan; Ivanišević, Aljoša; Kačmarcik, Igor;

An analysis of non-axisymmetric backward extrusion // Tehnicki Vjesnik-Technical Gazette, 19 (2012), 4; 953-957 doi:http://hrcak.srce.hr/index.php?show=clanak&id_clanak_jezik=137744 (međunarodna recenzija, članak, znanstveni)

doi

2774.

Mandić, Vesna; Erić, Dragan; Adamović, Dragan; Janjić, Mileta, Jurković, Zoran; Babić, Živko; Ćosić, Predrag

Concurrent Engineering Based on Virtual Manufacturing // Tehnicki Vjesnik-Technical Gazette, 19 (2012), 4; 885-892 (međunarodna recenzija, članak, znanstveni)

2775.

Terze, Zdravko; Zlatar, Dario; Mueller, Andreas

Lie-Group Integration Method for Constrained Multibody Systems in Stabilized DAE-Index-1 Form // Multibody system dynamics, 34 (2012), 3; 275-305 (podatak o recenziji nije dostupan, članak, znanstveni)

2776.

Neslušan, Miroslav; Mrkvica, Ivan; Čep, Robert; Raos, Pero

Heat distribution when grinding of nickel alloy // Tehnicki Vjesnik-Technical Gazette, 19 (2012), 4; 947-951 (međunarodna recenzija, članak, znanstveni)

2777.

Ban, Marko; Krajačić, Goran; Grozdek, Marino; Ćurko, Tonko; Duić, Neven

The role of cool thermal energy storage (CTES) in the integration of renewable energy sources (RES) and peak load reduction // Energy (Oxford), 48 (2012), 1; 108-117 doi:10.1016/j.energy.2012.06.070 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com ac.els-cdn.com dx.doi.org

2778.

Kršćanski, Sanjin; Turkalj, Goran

FEM stress concentration factors for fillet welded CHS-plate T-joint // Engineering review : znanstveni časopis za nove tehnologije u strojarstvu, brodogradnji i elektrotehnici, 32 (2012), 3; 147-155 (međunarodna recenzija, članak, znanstveni)

er.riteh.hr

2779.

Majić Renjo, Marijana; Lalić, Marijo; Ćurković, Lidija; Matijašić, Gordana

Rheological properties of aqueous alumina suspensions // Materialwissenschaft und Werkstofftechnik, 43 (2012), 11; 979-983 doi:10.1002/mawe.201200844 (međunarodna recenzija, članak, znanstveni)

doi onlinelibrary.wiley.com dx.doi.org

2780.

Novoselac, Stipica; Ergić, Todor; Baličević, Pavo

Linear and Nonlinear Buckling and Postbuckling Analysis of a Bar With Influence of Imperfections // Tehnicki Vjesnik - Technical Gazette, 19 (2012), 3; 695-701 (međunarodna recenzija, članak, znanstveni)

www.tehnicki-vjesnik.com

2781.

Stoić, Antun; Duspara, Miroslav; Kosec, B.; Stoić, Marija; Samardžić, Ivan

Application of water jetfor cutting polymer materials // Metalurgija, 52 (2012), 2; 255-258 (podatak o recenziji nije dostupan, prethodno priopćenje, znanstveni)

hrcak.srce.hr hrcak.srce.hr

2782.

Agarski, Boris; Kljajin, Milan; Budak, Igor; Tadic, Branko; Vukelic, Djordje; Bosak, Martin; Hodolic, Janko

Application of multi-criteria assessment in evaluation of motor vehicles' environmental performances // Tehnicki Vjesnik-Technical Gazette, 19 (2012), 2; 221-226 (međunarodna recenzija, članak, znanstveni)

2783.

Kipke, Irena; Fruk, Goran; Jemrić, Tomislav

Djelovanje 1-metil ciklopropena na fiziološke procese i kakvoću voća poslije berbe // Glasnik zaštite bilja, 35 (2012), 5; 46-55 (podatak o recenziji nije dostupan, pregledni rad, znanstveni)

2784.

Karaivanov, Dimitar; Troha, Sanjin

A method for storing large lenght loads // Journal of the University of Chemical Technology and Metallurgy, 47 (2012), 3; 347-350 (međunarodna recenzija, članak, znanstveni)

2785.

Troha, Sanjin; Lovrin, Neven; Milovančević, Miloš

Selection of the Two–Carrier Shifting Planetary Gear Train Controlled by Clutches and Brakes // Transactions of FAMENA, 3 (2012), 36; 1-12 (međunarodna recenzija, članak, znanstveni)

2786.

Keran, Zdenka; Math, Miljenko; Piljek, Petar

FEM analysis of friction coefficient in open die coining process of different grain sizes // Journal for technology of plasticity, 37 (2012), 1; 15-22 (podatak o recenziji nije dostupan, članak, znanstveni)

2787.

Kozmar, Hrvoje; Butler, Kyle; Kareem, Ahsan

Transient cross-wind aerodynamic loads on a generic vehicle due to bora gusts // Journal of wind engineering and industrial aerodynamics, 111 (2012), 73-84 doi:10.1016/j.jweia.2012.09.001 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com dx.doi.org

2788.

Brnić, Josip; Vukelić, Goran; Turkalj, Goran

Crack driving force prediction based on finite element analysis using standard models // Structural engineering and mechanics, 44 (2012), 5; 601-609 (međunarodna recenzija, članak, znanstveni)

technopress.kaist.ac.kr

2789.

Stojanović, Ivan: Alar, Vesna: Juraga, Ivan

Analiza zaštitnih svojstava premaza na vodenoj bazi na metalnim podlogama // Zaštita materijala, 53 (2012), 3; 195-200 (podatak o recenziji nije dostupan, članak, znanstveni)

2790.

Stipančić, Tomislav; Jerbić, Bojan; Ćurković, Petar

Context-Aware System Applied in Industrial Assembly Environment // International Journal of Advanced Robotic Systems, 9 (2012), 234; 1-10 doi:10.5772/53235 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada doi journals.sagepub.com

2791.

Allison, Chris, M.; Hohorst, Judy, K.; Allison, Brian, S.; Konjarek, Damir; Bajs, Tomislav; Pericas, Raimon; Reventos, Francesc; Lopez, Ramon

Preliminary Assessment of the Possible BWR Core/Vessel Damage States for Fukushima Daiichi Station Blackout Scenarios Using RELAP/SCDAPSIM // Science and technology of nuclear installations, Volume 2012 (2012) (2012) doi:10.1155/2012/646327 (međunarodna recenzija, članak, znanstveni)

doi www.hindawi.com

2792.

Dobrović, Slaven; Juretić, Hrvoje; Ljubas, Davor; Vinković Vrček, Ivana; Zebić Avdičević, Maja; Milić, Mirta; Kopjar, Nevenka; Nemet, Ina

Genotoxicity and Effects of Nanosilver Contamination in Drinking Water Desinfection // Water Science and Technology: Water Supply, 12 (2012), 6; 829-836 doi:10.2166/ws.2012.053 (međunarodna recenzija, članak, znanstveni)

doi ws.iwaponline.com

2793.

Mikulčić, Hrvoje; von Berg, Eberhard; Vujanović, Milan; Priesching, Peter; Tatschl, Reinhard; Duić, Neven

CFD Analysis of a Cement Calciner for a Cleaner Cement Production // Chemical Engineering transactions, 29 (2012), 1513-1518 doi:10.3303/CET1229253 (međunarodna recenzija, članak, znanstveni)

doi

2794.

Senjanović, Ivo; Vladimir, Nikola; Cho, Dae Seung

A simplified geometric stiffness in stability analysis of thin-walled structures by the finite element method // International Journal of Naval Architecture and Ocean Engineering, 4 (2012), 3; 313-321 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada

2795.

Cajner, Hrvoje; Šakić, Nikola; Ćosić Predrag

IMPROVEMENT OF EXPERIMENTAL PLANS USING MULTI- CRITERIA APPROACH // Tehnicki Vjesnik-Technical Gazette, 19 (2012), 3; 601-606 (međunarodna recenzija, članak, znanstveni)

2796.

Samardžić, Ivan; Despotović, Božo; Bajić, Darko

Weldability of modern low alloyed steels for elevated temperature application in steamboiler components production // METALURGIJA, 51 (2012), 3; 404-404 (međunarodna recenzija, članak, znanstveni)

2797.

Pavković, Branimir; Delač, Boris; Mrakovčić, Tomislav

Modified Water Loop Heat Pump System for a Hospital with Complex HVAC Systems // Tehnicki Vjesnik-Technical Gazette, 19 (2012), 3; 621-631 (podatak o recenziji nije dostupan, prethodno priopćenje, znanstveni)

2798.

Ćorić, Danko; Franz, Mladen

Behavior of thermo-mechanically treated CuZnAl-SMA // Tehnicki Vjesnik-Technical Gazette, 19 (2012), 3; 595-600 (međunarodna recenzija, članak, znanstveni)

2799.

Perković, Luka; Silva, Pedro; Ban, Marko; Kranjčević, Nenad; Duić, Neven

Harvesting high altitude wind energy for power production : The concept based on Magnus’ effect // Applied energy, 101 (2012), S.I.; 151-161 doi:10.1016/j.apenergy.2012.06.061 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com ac.els-cdn.com dx.doi.org

2800.

Runje, Biserka; Medić, Srđan; Kondić, Živko; Alar, Željko; Tunjić, Đuro

STATISTICAL PROCES CONTROL OF FIRE-RESISTANT COATING PRODUCTION BASED ON THICKNESS MEASUREMENTS // Tehnicki Vjesnik-Technical Gazette, Vol.19 (2012), 3; 589-593 (međunarodna recenzija, članak, znanstveni)

2801.

Halusek, Vlado; Šljivac, Damir; Jozsa, Lajos

Exploitation of the hydrokinetic potential of rivers by combining the traditional water wheel and the Darrieus turbine // Tehnicki Vjesnik-Technical Gazette, 19 (2012), 3; 659-664 (podatak o recenziji nije dostupan, prethodno priopćenje, znanstveni)

Pristup cjelovitom tekstu rada

2802.

Kulišić, Damir; Medić, Goran

O kriminalistički znakovitim obilježjima požara na osobnim automobilima // Policija i sigurnost, 21 (2012), 2; 293-326 (podatak o recenziji nije dostupan, pregledni rad, znanstveni)

www.policija.hr www.mup.hr

2803.

Schauperl, Zdravko; Nikšić, Mladen; Kolednjak, Davor

Impact of fuel type on the internal combustion engine condition // Promet - Traffic & Transportation, 24 (2012), 4; 285-293 doi:10.7307/ptt.v24i4.442 (recenziran, prethodno priopćenje, znanstveni)

doi www.fpz.unizg.hr www.fpz.unizg.hr

2804.

Grilec, Krešimir; Marić, Gojko; Miloš, Katica

Aluminium Foams in the Design of Transport Means // Promet - Traffic & Transportation, 24 (2012), 4; 295-304 doi:10.7307/ptt.v24i4.437 (recenziran, prethodno priopćenje, znanstveni)

doi www.fpz.unizg.hr www.fpz.unizg.hr

2805.

Čikić, Ante; Pintarić, Antun; Samardžić, Ivan

The influence of biomass quality on the purification of flue gases and multicyclone assembly material // METALURGIJA, 52 (2012), 1; 111-114 (podatak o recenziji nije dostupan, prethodno priopćenje, znanstveni)

2806.

Majić, Frane; Voss, Ralph; Virag, Zdravko

Boundary layer method for unsteady transonic flow // STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING, 58 (2012), 7-8; 470-481 doi:10.5545/sv-jme.2011.170 (međunarodna recenzija, članak, znanstveni)

doi www.sv-jme.eu

2807.

Jokić, Marko; Stegić, Milenko; Kranjčević, Nenad

Structural Stiffness Optimization with Respect to Vibration Response // Transactions of FAMENA, 36 (2012), 2; 1-8 (međunarodna recenzija, članak, znanstveni)

2808.

Štefanić, Nedeljko; Tošanović, Nataša; Hegedić, Miro

Kaizen workshop as an important element of continuous improvement process // International journal of industrial engineering and management, 3 (2012), 2; 93-98 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada wwwhttp www.iim.ftn.uns.ac.rs

2809.

Rastović, Danilo

Simulation and control of turbulence at tokamaks with artificial intelligence methods // Journal of modern physics, 3 (2012), december; 1858-1869 (podatak o recenziji nije dostupan, članak, znanstveni)

2810.

Ćosić, Boris; Krajačić, Goran; Duić, Neven

A 100% renewable energy system in the year 2050 : The case of Macedonia // Energy (Oxford), 48 (2012), 1; 80-87 doi:10.1016/j.energy.2012.06.078 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com ac.els-cdn.com dx.doi.org

2811.

Šolić, Sanja; Cajner, Franjo; Leskovšek, Vojteh

Effect of deep cryogenic treatment on mechanical and tribological properties of PM S390 MC high-speed steel // Materials Testing, 2012/10 (2012), 688-693 doi:10.3139/120.110380 (međunarodna recenzija, članak, znanstveni)

doi www.hanser-elibrary.com

2812.

Banovac, Eraldo; Pavlović, Darko; Vištica, Nikola

Mathematical Aspects of Acceptance Sampling Procedure // International journal of mathematical models and methods in applied sciences, 6 (2012), 5; 625-633 (međunarodna recenzija, članak, znanstveni)

2813.

Gubeljak, Nenad; Predan, Jožef; Kozak, Dražan

Leak-Before-Break Analysis of a Pressurizer - Estimation of the Elastic-Plastic Semi-elliptical Through Wall Crack Opening Displacement // Structural integrity and life, 12 (2012), 1; 31-34 (podatak o recenziji nije dostupan, članak, znanstveni)

divk.inovacionicentar.rs divk.inovacionicentar.rs

2814.

Lozina, Željan; Sedlar, Damir; Vučina, Damir

Model Update with Observer/Kalman Filter and Genetic Algorithm Approach // Transactions of FAMENA, 36 (2012), 2; 9-22 (međunarodna recenzija, članak, znanstveni)

2815.

Stepanić, Josip; Medić, Srđan; Kondić, Živko

Paralaksa u dinamičkom, beskontaktnom i nerazornom, preciznom mjerenju duljina // Tehnicki Vjesnik-Technical Gazette, 19 (2012), 2; 317-320 (međunarodna recenzija, članak, znanstveni)

2816.

Štefanić, Ivan; Raos, Pero; Samardžić, Ivan; Tintor, Boris; Musser, Edo

Rapid prototyping of casting cores // Tehnicki Vjesnik-Technical Gazette, 19 (2012), 2; 459-464 (međunarodna recenzija, članak, znanstveni)

2817.

Puh, Franko; Šegota, Toni; Jurković, Zoran

Optimization of hard turning process parameters with PCBN tool based on the Taguchi method // Tehnicki Vjesnik-Technical Gazette, 19 (2012), 2; 415-419 (međunarodna recenzija, članak, znanstveni)

2818.

Galeta, Tomislav; Raos, Pero; Somolanji, Marija

Impact of structure and building orientation on strentgh of 3d printed models // KGK-Kautschuk Gummi Kunststoffe, 65 (2012), 10; 36-42 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada www.kgk-rubberpoint.de

2819.

Koboević, Nikša; Jurjević, Mate; Koboević, Žarko

Influence of cutting parameters on thrust force, drilling torque and delamination during drilling of carbon fibre reinforced composites // Tehnicki Vjesnik-Technical Gazette, 19 (2012), 2; 389-396 (podatak o recenziji nije dostupan, prethodno priopćenje, znanstveni)

2820.

Kostelac, Dražen; Vukomanović, Mladen; Ikonić, Milan

Integrating enterprise project portfolio management with the balanced scorecard: a case from the pharmaceutical industry // Tehnicki Vjesnik-Technical Gazette, 19 (2012), 2; 303-314 (međunarodna recenzija, članak, znanstveni)

2821.

Irsag, Bojan; Pukšec, Tomislav; Duić, Neven

Long term energy demand projection and potential for energy savings of Croatian tourism-catering trade sector // Energy (Oxford), 48 (2012), 1; 398-405 doi:10.1016/j.energy.2012.06.069 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com ac.els-cdn.com dx.doi.org

2822.

Gečevska, Valentina; Veža, Ivica; Čuš, Franc; Anišić, Zoran; Štefanić, Nedeljko

Lean PLM - Information Technology Strategy for Innovative and Sustainable Business Environment // International journal of industrial engineering and management, 3 (2012), 1; 15-23 (podatak o recenziji nije dostupan, prethodno priopćenje, znanstveni)

2823.

Cajner, Franjo; Landek, Darko; Rafael, Hrvoje; Kovačić, Saša

Effect of the heating rate in the tempering of EN 100 V1 // Journal of heat treatment and materials, 67 (2012), 2; 118-124 doi:HT110145 (međunarodna recenzija, članak, znanstveni)

doi

2824.

Cajner, Franjo; Landek, Darko; Rafael, Hrvoje; Šolić, Sanja; Kovačić, Saša

Effect of deep cryogenic treatment on dilatometric curve and tribological properties of high speed steel // International heat treatment and surface engineering, 6 (2012), 2; 67-71 doi:10.1179/1749514812Z.00000000018 (međunarodna recenzija, članak, znanstveni)

doi

2825.

Župan, Josip; Filetin, Tomislav; Landek, Darko

The effect of TiO2 nanoparticles on fluid quenching characteristics // International heat treatment and surface engineering, 6 (2012), 2; 56-60 doi:10.1179/1749514812Z.00000000014 (međunarodna recenzija, članak, znanstveni)

doi www.ingentaconnect.com dx.doi.org

2826.

Kršulja, Marko; Mijić, Saša; Barišić, Branimir; Car, Zlatan

Design and Planning of Clamping Work-holder Station for Sheet Metal Part of Car Body // Manufacturing and industrial engineering, 11 (2012), 2; 38-43 (podatak o recenziji nije dostupan, članak, znanstveni)

opac.lib.tuke.sk web.tuke.sk web.tuke.sk

2827.

Mateša, Branko; Samardžić, Ivan; Dunđer, Marko

Effect of cladding procedures on mechanical properties of heat treated dissimilar joint // METALURGIJA, 51 (2012), 4; 441-444 (međunarodna recenzija, članak, znanstveni)

2828.

Kralj, Slobodan; Kožuh, Zoran; Garašić, Ivica; Tomić, Tanja

Sklonost čelika API 5L X80 prema hladnim pukotinama // Zavarivanje, 55 (2012), 5-13 (podatak o recenziji nije dostupan, prethodno priopćenje, znanstveni)

2829.

Kozmar, Hrvoje; Procino, Lorenzo; Borsani, Alessandra; Bartoli, Gianni

Sheltering efficiency of wind barriers on bridges // Journal of wind engineering and industrial aerodynamics, 107/108 (2012), 274-284 doi:10.1016/j.jweia.2012.04.027 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com dx.doi.org

2830.

Šoštarić, Damir; Samardžić, Ivan; Pintarić, Antun

Quality monitoring at fusion welding of polyethylene high-density pipes // METALURGIJA, 51 (2012), 4; 505-508 (podatak o recenziji nije dostupan, prethodno priopćenje, znanstveni)

2831.

Valiček, J.; Čep, R.; Rokosz, K.; Lukianowicz, C.; Kozak, Dražan; Zelenak, M.; Koštial, P.; Hloch, S.; Harničarova, M.; Hlavaček, P.; Haluzikova, B.

New way to take control of a structural grain size in the formation of nanomaterials by extrusion // Materialwissenschaft und Werkstofftechnik, 43 (2012), 5; 405-411 doi:10.1002/mawe.201200973 (međunarodna recenzija, članak, znanstveni)

doi onlinelibrary.wiley.com

2832.

Mikulčić, Hrvoje; Vujanović, Milan; Fidaros, Dimitris K.; Priesching, Peter; Minić, Ivica; Tatschl, Reinhard; Duić, Neven; Stefanović, Gordana

The application of CFD modelling to support the reduction of CO2 emissions in cement industry // Energy (Oxford), 45 (2012), 1; 464-473 doi:10.1016/j.energy.2012.04.030 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com ac.els-cdn.com dx.doi.org

2833.

Ivanović, Vladimir; Hoić, Matija; Deur, Joško; Herold, Zvonko; Tseng, Hongtei Eric

Design of Test Rigs for a Dry Dual Clutch and its Electromechanical Actuator // SAE International journal of passenger cars. Mechanical systems, 5 (2012), 1; 612-620 doi:10.4271/2012-01-0807 (međunarodna recenzija, članak, znanstveni)

doi www.saejournals.org

2834.

Medić, Srđan; Kondić, Živko; Runje, Biserka

VALIDATION OF THE REALISED MEASUREMENT UNCERTAINTY IN PROCESS OF PRECISE LINE SCALES CALIBRATION // Tehnicki Vjesnik-Technical Gazette, Vol. 19 (2012), 331-337 (međunarodna recenzija, članak, znanstveni)

2835.

Vesenjak, Matej; Krstulović-Opara, Lovre; Ren, Zoran

Characterization of photopolymer cellular structure with silicone pore filler // Polymer testing, 31 (2012), 5; 705-709 doi:10.1016/j.polymertesting.2012.04.007 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com dx.doi.org

2836.

Plančak, Miroslav; Kacmarcik, Igor; Vilotić, Dragiša; Kršulja, Marko

Compression of Bimetallic Components – Analytical and Experimental Investigation // Annals of the Faculty of Engineering Hunedoara, X (2012), 2; 157-160 (podatak o recenziji nije dostupan, članak, znanstveni)

annals.fih.upt.ro annals.fih.upt.ro

2837.

Milutinović, Milan; Ivanović, Vladimir; Deur, Joško; Ščap, Dragutin

Geometric Analysis of a Dual Clutch Lever-Based Electromechanical Actuator with Application to Actuator Dynamics Modelling // SAE International journal of passenger cars. Mechanical systems, 5 (2012), 2; 865-875 doi:10.4271/2012-01-0631 (međunarodna recenzija, članak, znanstveni)

doi saepcmech.saejournals.org

2838.

Galzina, Vjekoslav; Lujić, Roberto; Šarić, Tomislav

Adaptive fuzzy particle swarm optimization for flow-shop scheduling problem // Tehnicki Vjesnik-Technical Gazette, 19 (2012), 1; 151-157 (podatak o recenziji nije dostupan, prethodno priopćenje, znanstveni)

2839.

Vuherer, Tomaž; Maruschak, P.; Samardžić, Ivan

Behaviour of coarse grain heat affected zone (HAZ) during cycle loading // METALURGIJA, 51 (2012), 3; 301-304 (međunarodna recenzija, članak, znanstveni)

2840.

Zelenak, M.; Valiček, Jan; Hloch, Sergej; Kozak, Dražan; Samardžić, Ivan; Harničarova, M; Klich, J. Hlavaček, P.; Cincio, R.

Comparison of mechanical properties of surface layers with use of nanoindentation and microindentation tests // METALURGIJA, 51 (2012), 3; 309-312 (podatak o recenziji nije dostupan, prethodno priopćenje, znanstveni)

2841.

Karaivanov, Dimitar; Troha, Sanjin; Pavlova, Ralitsa

Investigation into self-locking planetary gear trains throught the lever analogy // Transactions of FAMENA, 36 (2012), 1; 13-24 (međunarodna recenzija, članak, znanstveni)

2842.

Šestan, Ante; Vladimir, Nikola; Vulić, Nenad; Ljubenkov, Boris

A study into resonant phenomena in the catamaran ferry propulsion system // Transactions of FAMENA, 36 (2012), 1; 35-44 (međunarodna recenzija, članak, znanstveni)

2843.

Katić, Marko; Mudronja, Vedran

Final report on EURAMET.L-K1.2: EURAMET comparison of gauge blocks by interferometry // Metrologia, 49 (2012), S; 04005-1 doi:10.1088/0026-1394/49/1A/04005 (međunarodna recenzija, članak, znanstveni)

doi iopscience.iop.org

2844.

Marković, Marija; Stojanović, Ivan; Runje, Biserka

Propagation of nonlinear phenomena in a measurement sequence // Interdisciplinary description of complex systems, 10 (2012), 1; 50-56 doi:10.7906/indecs.10.1.4 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada doi hrcak.srce.hr

2845.

Milinović, Andrijana; Krumes, Dragomir; Marković, Radojka

An investigation of boride layers growth kinetics on carbon steels // Tehnicki Vjesnik-Technical Gazette, 19 (2012), 1; 27-31 (međunarodna recenzija, članak, znanstveni)

2846.

Valíček, Jan; Harničárová, Marta; Čep, Robert; Rokosz, Krzysztof; Łukianowicz, Czesław; Kozak, Dražan; Zeleňák, Michal; Koštial, Pavol

Surface Quality Control of Materials Being Cut by Laser with Respect to Corrosion Resistance // Diffusion and defect data, solid state data. Part A, Defect and diffusion forum, 326-328 (2012), 324-329 doi:10.4028/www.scientific.net/DDF.326-328.324 (podatak o recenziji nije dostupan, članak, znanstveni)

doi www.scientific.net

2847.

Brillová, Kateřina; Ohlídal, Miloslav; Valíček, Jan; Kozak, Dražan; Hloch, Sergej; Zeleňák, Michal; Harničárová, Marta; Hlaváček, Petr

Spectral analysis of metallic surfaces topography generated by abrasive waterjet // Tehnicki Vjesnik-Technical Gazette, 19 (2012), 1; 1-9 (međunarodna recenzija, članak, znanstveni)

2848.

Jurjević, Mate; Jurjević, Nataša; Koboević, Nikša

Modelling of dynamic reliability stages of a ship propulsion system with safety and exhaust emission // Tehnicki Vjesnik-Technical Gazette, 19 (2012), 1; 159-165 (podatak o recenziji nije dostupan, prethodno priopćenje, znanstveni)

2849.

Staniša, Branko; Schauperl, Zdravko; Šnajdar, Mateja

Erosion process of 66 MW steam turbine rotor blades // Materials Testing, 54 (2012), 157-162 (međunarodna recenzija, članak, znanstveni)

www.materialstesting.de

2850.

Šercer, Mladen; Godec, Damir; Raos, Pero

From an Idea to the Final Polymer Product // Engineering review : znanstveni časopis za nove tehnologije u strojarstvu, brodogradnji i elektrotehnici, 32 (2012), 1; 41-47 (međunarodna recenzija, članak, znanstveni)

2851.

Tomić, Mladen; Perković, Luka; Živković, Predrag; Duić, Neven; Stefanović, Gordana

Closed vessel combustion modelling by using pressure-time evolution function derived from two- zonal approach // Thermal Science, 16 (2012), 2; 561-572 doi:10.2298/TSCI110916014T (međunarodna recenzija, članak, znanstveni)

doi

2852.

Stanković, Tino; Štorga, Mario; Marjanović, Dorian

Synthesis of Truss Structure Designs by NSGA-II and NodeSort Algorithm // STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING, 58 (2012), 3; 203-212 doi:10.5545/sv-jme.2011.042 (međunarodna recenzija, članak, znanstveni)

doi en.sv-jme.eu en.sv-jme.eu

2853.

Marenić, Eduard; Sorić, Jurica; Tonković, Zdenko

Nano-submodelling technique based on overlapping domain decomposition method // Transactions of FAMENA, 36 (2012), 1-12 (međunarodna recenzija, članak, znanstveni)

2854.

Baršić, Gorana; Mahović, Sanjin; Zorc, Hrvoje

Development of nano-roughness calibration standards // Measurement science & technology, 23 (2012), 3; 035009-1 doi:10.1088/0957-0233/23/3/035009 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada doi iopscience.iop.org iopscience.iop.org

2855.

Majić, Marijana; Ćurković, Lidija

Fracture toughness of alumina ceramics determined by Vickers indentation technique // Materials Testing, 54 (2012), 4; 228-231 (međunarodna recenzija, članak, znanstveni)

2856.

Alar, Vesna; Stojanović, Ivan; Židov, Bruno

Dependence of steel workpiece corrosion rate on the emulsion concentration for machining // Materials Testing, 54 (2012), 314-317 (međunarodna recenzija, članak, znanstveni)

2857.

Alar, Vesna; Baršić, Gorana; Runje, Biserka; Alar, Željko

The influence of the surface finishing on the electrochemical behavior of austenitic and superaustenitic steels // Materialwissenschaft und Werkstofftechnik, 43 (2012), 8; 725-732 doi:10.1002/mawe.201200854 (međunarodna recenzija, članak, znanstveni)

doi onlinelibrary.wiley.com

2858.

Liščić, Božidar; Filetin, Tomislav

Measurement of Quenching Intensity, Calculation of Heat Transfer Coefficient and Global Database of Liquid Quenchants // Materiálové inžinierstvo, 19 (2012), 2; 52-63 (podatak o recenziji nije dostupan, članak, znanstveni)

ojs.mateng.sk www.mateng.sk fstroj.uniza.sk

2859.

Niu, Jitai; Luo, Xiangwei; Tian, Hao; Brnić, Josip

Vacuum brazing of aluminium metal matrix composite (55 vol.% SiCp/A356) using aluminium-based filler alloy // Materials Science and Engineering B-Advanced Functional Solid-State Materials, 177 (2012), 19; 1707-1711 doi:10.1016/j.mseb.2011.12.042 (međunarodna recenzija, članak, znanstveni)

doi ac.els-cdn.com www.sciencedirect.com dx.doi.org

2860.

Ninić, Neven; Klarin, Branko; Tolj, Ivan

Hybrid wind-power-distillation plant // Thermal Science, 16 (2012), 1; 249-259 doi:10.2298/TSCI111022032N (međunarodna recenzija, članak, znanstveni)

doi www.doiserbia.nb.rs www.doiserbia.nb.rs

2861.

Lovrenić-Jugović, Martina; Tonković, Zdenko; Skozrit, Ivica

Numerical Modelling of Damage Accumulation in Cortical Bone Tissue // Tehnicki Vjesnik-Technical Gazette, 19 (2012), 1; 83-91 (međunarodna recenzija, članak, znanstveni)

2862.

Marunić, Gordana; Gregov, Goran; Glažar, Vladimir

Comparison between 3D FEM and Standard ISO Tooth Root Stresses // Key engineering materials, 488-489 (2012), 85-88 doi:10.4028/www.scientific.net/KEM.488-489.85 (podatak o recenziji nije dostupan, članak, znanstveni)

doi www.scientific.net

2863.

Augustin, Goran; Davila, Slavko; Udiljak, Toma; Staroveški, Tomislav; Brezak, Danko; Babić, Slaven

Temperature changes during cortical bone drilling with a newly designed step drill and an internally cooled drill // International orthopaedics, 36 (2012), 7; 1449-1456 doi:10.1007/s00264-012-1491-z (međunarodna recenzija, članak, znanstveni)

doi www.ncbi.nlm.nih.gov www.springerlink.com

2864.

Gečevska, Valentina; Štefanić, Nedeljko; Veža, Ivica; Čuš, Franc

SUSTAINABLE BUSINESS SOLUTIONS THROUGH LEAN PRODUCT LIFECYCLE MANAGEMENT // Acta Technica Corviniensis, 5 (2012), 1; 135-142 (podatak o recenziji nije dostupan, pregledni rad, znanstveni)

Pristup cjelovitom tekstu rada

2865.

Trkmić, Marija; Ćurković, Lidija; Ašperger, Danijela

Chemical analysis of solid residue from liquid and solid fuel combustion : Method development and validation // Materialwissenschaft und Werkstofftechnik, 43 (2012), 6; 503-510 doi:10.1002/mawe.201200860 (međunarodna recenzija, članak, znanstveni)

doi onlinelibrary.wiley.com

2866.

Panjan, Peter; Čekada, M.; Panjan, M.; Kek-Merl, D.; Zupanič, F.; Ćurković, Lidija; Paskvale, S.

Surface density of growth defects in different PVD hard coatings prepared by sputtering // Vacuum, 86 (2012), 6; 794-798 doi:10.1016/j.vacuum.2011.07.013 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com ac.els-cdn.com dx.doi.org

2867.

Wiedemair, Wolfgang; Tuković, Željko; Jasak, Hrvoje; Poulikakos, Dimos; Kurtcuoglu, Vartan

On ultrasound-induced microbubble oscillation in a capillary blood vessel and its implications for the blood–brain barrier // Physics in medicine and biology, 57 (2012), 4; 1019-1045 doi:10.1088/0031-9155/57/4/1019 (međunarodna recenzija, članak, znanstveni)

doi iopscience.iop.org

2868.

Tuković, Željko; Jasak, Hrvoje

A moving mesh finite volume interface tracking method for surface tension dominated interfacial fluid flow // Computers & fluids, 55 (2012), 70-84 doi:10.1016/j.compfluid.2011.11.003 (međunarodna recenzija, članak, znanstveni)

doi ac.els-cdn.com www.sciencedirect.com dx.doi.org

2869.

Brnić, Josip; Turkalj, Goran; Vukelić, Goran; Brčić, Marino

Analysis of the Dependence of Material Properties on Temperature – Steel 1.4122 // High temperature materials and processes, 31 (2012), 3; 259-266 doi:10.1515/htmp-2012-0003 (međunarodna recenzija, članak, znanstveni)

doi www.degruyter.com

2870.

Salopek Čubrić, Ivana; Skenderi, Zenun; Mihelić Bogdanić, Alka; Andrassy, Mladen

Experimental Study of Thermal Resistance of Knitted Fabrics // Experimental thermal and fluid science, 38 (2012), 223-228 doi:10.1016/j.expthermflusci.2011.12.010 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com ac.els-cdn.com dx.doi.org

2871.

Pukšec, Tomislav; Duić, Neven

Economic viability and geographic distribution of centralized biogas plants: case study Croatia // Clean technologies and environmental policy, 14 (2012), 3; 427-433 doi:10.1007/s10098-012-0460-y (međunarodna recenzija, članak, znanstveni)

doi www.springerlink.com

2872.

Sedlar, Damir; Lozina, Željan; Vučina, Damir

An implementation of structural change detection procedure based on experimental and numerical model correlation // Journal of sound and vibration, 331 (2012), 13; 3068-3082 doi:10.1016/j.jsv.2012.02.019 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com ac.els-cdn.com dx.doi.org

2873.

Mikulčić, Hrvoje; Berg, Eberhard von; Vujanović, Milan; Priesching, Peter; Perković, Luka; Tatschl, Reinhard; Duić, Neven

Numerical Modelling of Calcination Reaction Mechanism for Cement Production // Chemical engineering science, 69 (2012), 1; 607-615 doi:10.1016/j.ces.2011.11.024 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com ac.els-cdn.com dx.doi.org

2874.

Talar, R.; Stoić, Antun

FINISH MACHINING OF HARDENED GEARS WHEELS USING CUBIC BORON NITRIDE (CBN) INSERTS // METALURGIJA, 51 (2012), 2; 253-256 (podatak o recenziji nije dostupan, prethodno priopćenje, znanstveni)

2875.

Mateša, Branko; Samardžić, Ivan; Dunđer, Marko

The influence of the heat treatment on delta ferrite transformation in austenitic stainless steel welds // Metalurgija, 51 (2012), 2; 229-232 (podatak o recenziji nije dostupan, prethodno priopćenje, znanstveni)

2876.

Stanković, Igor; Perinić, Mladen; Jurković, Zoran; Mandić, Vesna; Maričić, Sven

USAGE OF NEURAL NETWORK FOR THE PREDICTION OF SURFACE ROUGHNESS AFTER THE ROLLER BURNISHING // METALURGIJA, 51 (2012), 2; 207-210 (podatak o recenziji nije dostupan, prethodno priopćenje, znanstveni)

2877.

Vučina, Damir; Lozina, Željan; Pehnec, Igor

Computational procedure for optimum shape design based on chained Bezier surfaces parameterization // Engineering applications of artificial intelligence, 25 (2012), 3; 648-667 doi:10.1016/j.engappai.2011.11.007 (međunarodna recenzija, članak, znanstveni)

doi ac.els-cdn.com www.sciencedirect.com dx.doi.org

2878.

Matijević, Božidar; Pedišić, Ljiljana

The influence of quenchant composition on the cooling rate // Journal of heat treatment and materials, 67 (2012), 2; 100-105 (međunarodna recenzija, članak, znanstveni)

2879.

Matijević, Božidar; Župan, Josip; Pedišić, Ljiljana

Properties of different compositions of oils as quenchants // International heat treatment and surface engineering, 6 (2012), 1; 15-18 doi:10.1179/1749514811Z.0000000007 (međunarodna recenzija, članak, znanstveni)

doi www.ingentaconnect.com dx.doi.org

2880.

Matijević, Božidar; Kumić, Ivan; Belić, Tomislav

The low temperature aluminizing kinetic of hot work tool steels // Journal of heat treatment and materials, 67 (2012), 2; 133-139 (međunarodna recenzija, članak, znanstveni)

2881.

Matijević, Božidar; Kumić, Ivan; Alar, Vesna

Modification of the hot work tool steel surface by different thermochemical treatments // International heat treatment and surface engineering, 6 (2012), 1; 38-42 doi:10.1179/1749514811Z.0000000006 (međunarodna recenzija, članak, znanstveni)

doi www.ingentaconnect.com

2882.

Augustin, Goran; Zigman, Tomislav; Davila, Slavko; Udiljak, Toma; Staroveški, Tomislav; Brezak, Danko; Babić, Slaven

Cortical bone drilling and thermal osteonecrosis // Clinical biomechanics, 27 (2012), 4; 313-325 doi:10.1016/j.clinbiomech.2011.10.010 (međunarodna recenzija, članak, znanstveni)

doi ac.els-cdn.com www.sciencedirect.com dx.doi.org

2883.

Plančak, Miroslav; Car, Zlatan; Kršulja, Marko; Vilotić, Dragiša; Kačmarcik, Igor; Movrin, Dejan

Possibilities to Measure Contact Friction in Bulk Metal Forming // Tehnicki Vjesnik-Technical Gazette, 19 (2012), 4; 727-734 doi:http://hrcak.srce.hr/index.php?show=clanak&id_clanak_jezik=137660 (međunarodna recenzija, članak, znanstveni)

doi

2884.

Pepelnjak, Tomaž; Magoč, Vladimir; Barišić, Branimir

Analysis of Shear Hat Test in Digital Environment // METALURGIJA, 51 (2012), 2; 153-156 (međunarodna recenzija, članak, znanstveni)

public.carnet.hr public.carnet.hr

2885.

Kršulja, Marko; Car, Zlatan; Radelja, Hrvoje

Behaviour of X5 CrNiMo 17-12-2 Material During Deep Drawing Process // METALURGIJA, 51 (2012), 2; 203-206 (međunarodna recenzija, članak, znanstveni)

public.carnet.hr public.carnet.hr

2886.

Cipek, Mihael; Deur, Joško; Petrić, Joško

Bond graph modelling and power flow analysis of series–parallel HEV transmissions // International journal of powertrains, 1 (2012), 4; 396-419 doi:10.1504/IJPT.2012.049628 (podatak o recenziji nije dostupan, članak, znanstveni)

doi www.inderscience.com

2887.

Deur, Joško; Ivanović, Vladimir; Herold, Zvonko; Kostelac, Milan; Tseng, Hongtei Eric

Dry clutch control based on electromechanical actuator position feedback loop // International journal of vehicle design, 60 (2012), 3/4; 305-326 doi:10.1504/IJVD.2012.050086 (međunarodna recenzija, članak, znanstveni)

doi www.inderscience.com

2888.

Karšaj, Igor; Humphrey, Jay D.

A multilayered wall model of arterial growth and remodeling // Mechanics of materials, 44 (2012), 110-119 doi:10.1016/j.mechmat.2011.05.006 (međunarodna recenzija, članak, znanstveni)

doi ac.els-cdn.com www.sciencedirect.com dx.doi.org

2889.

Čanžar, Predrag; Tonković, Zdenko; Kodvanj, Janoš

Microstructure influence on fatigue behaviour of nodular cast iron // Materials Science and Engineering : A, 556 (2012), 30; 88-99 doi:10.1016/j.msea.2012.06.062 (međunarodna recenzija, članak, znanstveni)

doi ac.els-cdn.com www.sciencedirect.com dx.doi.org

2890.

Ćosić, Boris; Markovska, Natasa; Krajačić, Goran; Taseska, Verica; Duić, Neven

Environmental and economic aspects of higher RES penetration into Macedonian power system // Applied thermal engineering, 43 (2012), 158-162 doi:10.1016/j.applthermaleng.2011.10.042 (međunarodna recenzija, članak, znanstveni)

doi ac.els-cdn.com www.sciencedirect.com dx.doi.org

2891.

Smojver, Ivica; Ivančević, Darko

Advanced Modelling of Bird Strike on High Lift Devices Using Hybrid Eulerian-Lagrangian Formulation // Aerospace science and technology, 23 (2012), 1; 224-232 doi:10.1016/j.ast.2011.07.010 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com ac.els-cdn.com dx.doi.org

2892.

Vučina, Damir; Milas, Zoran; Pehnec, Igor

Reverse Shape Synthesis of the Hydropump Volute using Stereo-Photogrammetry, Parameterization and Geometric Modeling // Journal of computing and information science in engineering, 12 (2012), 2; 021001-1 doi:10.1115/1.4005719 (međunarodna recenzija, članak, znanstveni)

doi dx.doi.org scitation.aip.org

2893.

Landek, Darko; Župan, Josip; Filetin, Tomislav

Systematical analysis of cooling curves for liquid quenchants // International heat treatment and surface engineering, 6 (2012), 2; 51-55 doi:10.1179/1749514812Z.00000000019 (međunarodna recenzija, članak, znanstveni)

doi www.ingentaconnect.com

2894.

Brnić, Josip; Turkalj, Goran; Čanađija, Marko; Lanc, Domagoj; Kršćanski, Sanjin

Responses of Austenitic Stainless Steel American Iron and Steel Institute (AISI) 303 (1.4305) Subjected to Different Environmental Conditions // Journal of testing and evaluation, 40 (2012), 2; 319-328 doi:10.1520/JTE104160 (međunarodna recenzija, članak, znanstveni)

doi www.astm.org

2895.

Vukelić, Goran; Brnić, Josip

Pressure Vessel Steels Crack Driving Force Assessment Using Different Models // Journal of constructional steel research, 72 (2012), 29-34 doi:10.1016/j.jcsr.2011.09.015 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com ac.els-cdn.com dx.doi.org

2896.

Stubljar, Sanja; Jemrić, Tomislav; Fruk, Goran; Ivić, Dario; Žutić, Ivanka; Fabek, Sanja; Benko, Božidar; Toth, Nina

Postharvest fruit quality and occurrence intensity of pathogenic fungi on nectarine // Savremena poljoprivreda, 61 (2012), special; 37-44 (podatak o recenziji nije dostupan, članak, znanstveni)

2897.

Lovrenić-Jugović, Martina; Tonković, Zdenko; Skozrit, Ivica

Modelling of Nonlinear Creep and Recovery Behaviour of Cortical Bone // Key engineering materials, 488-489 (2012), 186-189 doi:10.4028/www.scientific.net/KEM.488-489.186 (podatak o recenziji nije dostupan, članak, znanstveni)

doi www.scientific.net

2898.

Konjatić, Pejo; Kozak, Dražan; Gubeljak, Nenad

The Influence of The Weld Width on Fracture Behaviour of The Heterogeneous Welded Joint // Key engineering materials, 488-489 (2012), 367-370 doi:10.4028/www.scientific.net/KEM.488-489.367 (podatak o recenziji nije dostupan, članak, znanstveni)

doi

2899.

Opalić, Milan; Galić, Ivica; Vučković, Krešimir

Influence of the wall thickness on the allowable and failure pressures of two- and tree-way globe valve bodies // Key Engineering Materials, 488-489 (2012), 646-649 doi:10.4028/www.scientific.net/KEM.488-489.646 (međunarodna recenzija, članak, znanstveni)

doi www.scientific.net

2900.

Opalić, Milan; Vučković, Krešimir; Žeželj, Dragan

Effect of rotational speed on thin-rim gear bending fatigue crack initiation life // Key Engineering Materials, 488-489 (2012), 456-459 doi:10.4028/www.scientific.net/KEM.488-489.456 (međunarodna recenzija, članak, znanstveni)

doi www.scientific.net

2901.

Krstulović-Opara, Lovre; Garafulić, Endri; Klarin, Branko; Domazet, Željko

Application of gradient based IR thermography to the GRP structures inspection // Key engineering materials, 488-489 (2012), 682-685 doi:10.4028/www.scientific.net/KEM.488-489.682 (podatak o recenziji nije dostupan, članak, znanstveni)

doi www.scientific.net

2902.

Brillova, K.; Ohlidal, M.; Valiček, J.; Hloch, S.; Kozak, D; Ivandić, Ž.

Evaluation of abrasive waterjet produced titan surfaces topography by spectral analysis techniques // METALURGIJA, 51 (2012), 1; 39-42 (međunarodna recenzija, članak, znanstveni)

2903.

Ninić, Neven; Grljušić, Mirko; Jelić, Maro

Decomposition Method as a New Type of Second Law Analysis of the Combustion Process at Internal Combustion Engines // International Journal of Exergy, 10 (2012), 1; 1-21 doi:10.1504/IJEX.2012.045058 (međunarodna recenzija, članak, znanstveni)

doi www.inderscience.com

2904.

Vučina, Damir; Lozina, Željan; Pehnec, Igor

Ad-Hoc Cluster and Workflow for Parallel Implementation of Initial-Stage Evolutionary Optimum Design // Structural and multidisciplinary optimization, 45 (2012), 2; 197-222 doi:10.1007/s00158-011-0687-y (međunarodna recenzija, članak, znanstveni)

doi www.springerlink.com

2905.

Glažar, Vladimir; Trp, Anica; Lenić, Kristian

Numerical Study of Heat Transfer and Analysis of Optimal Fin Pitch in a Wavy Fin-and-Tube Heat Exchanger // HEAT TRANSFER ENGINEERING, 33 (2012), 2; 88-96 doi:10.1080/01457632.2011.589312 (međunarodna recenzija, članak, znanstveni)

doi www.tandfonline.com

2906.

Jemrić, Tomislav; Zoran, Ilić

Present state of cold chain and postharvest loss of fruits and vegetables in Croatia and Serbia // Agriculturae Conspectus Scientificus, 77 (2012), 1; 1-4 (međunarodna recenzija, pregledni rad, znanstveni)

Pristup cjelovitom tekstu rada acs.agr.hr www.agr.unizg.hr

2907.

Alujević, Neven; Tomac, Ivan; Gardonio, Paolo

Tuneable Vibration Absorber using Acceleration and Displacement Feedback // Journal of sound and vibration, 331 (2012), 12; 2713-2728 doi:10.1016/j.jsv.2012.01.012 (međunarodna recenzija, članak, znanstveni)

doi ac.els-cdn.com www.sciencedirect.com dx.doi.org

2908.

Rastović, Danilo

Targeting and synchronization at tokamak with recurrent artificial neural networks // Neural computing & applications, 21 (2012), 5; 1065-1069 doi:10.1007/s00521-011-0527-4 (međunarodna recenzija, članak, znanstveni)

doi www.springerlink.com

2909.

Brezak, Danko; Majetić, Dubravko; Udiljak, Toma; Kasać, Josip

Tool Wear Estimation using an Analytic Fuzzy Classifier and Support Vector Machines // Journal of intelligent manufacturing, 23 (2012), 3; 797-809 doi:10.1007/s10845-010-0436-x (međunarodna recenzija, članak, znanstveni)

doi www.springerlink.com

2910.

Fruk, Goran; Jemrić, Tomislav

Acoustic Impulse Method Can not Determine Nectarine Fruit Quality // Acta Horticulturae, 934 (2012), 133-138 (međunarodna recenzija, članak, znanstveni)

2911.

Turkalj, Goran; Brnić, Josip; Lanc, Domagoj; Kravanja, Stojan

Updated Lagrangian formulation for nonlinear stability analysis of thin-walled frames with semi-rigid connections // International Journal of Structural Stability and Dynamics, 12 (2012), 3; 1250013-1 doi:10.1142/S0219455412500137 (međunarodna recenzija, članak, znanstveni)

doi www.worldscientific.com

2912.

Ćurković, Petar; Jerbić, Bojan; Stipančić, Tomislav

Swarm-based Approach to Path Planning Using Honey Bees Mating Algorithm and Adaptive Resonance Theory (ART1) // International review of mechanical engineering, 5 (2012), 5; 624-629 (međunarodna recenzija, članak, znanstveni)

www.praiseworthyprize.org

2913.

Žilić, Tihomir; Kasać, Josip; Essert, Mario; Novaković, Branko; Šitum, Željko

Performance Comparison of Different Control Algorithms for Robot Manipulators // Strojarstvo, 54 (2012), 5; 399-407 (međunarodna recenzija, članak, znanstveni)

2914.

Bajić, Dražen; Celent, Luka; Jozić, Sonja

Modeling of the influence of cutting parameters on the surface roughness, tool wear and the cutting force in face milling in off-line process control // STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING, 58 (2012), 11; 673-682 doi:10.5545/sv-jme.2012.456 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada doi

2915.

Matika, Dario; Mihanović, Luka

Reliability of a Light High Speed Marine Diesel Engine // Brodogradnja : Teorija i praksa brodogradnje i pomorske tehnike, 62 (2011), 1; 28-36 (međunarodna recenzija, članak, znanstveni)

hrcak.srce.hr

2916.

Obucina, Murco; Smajic, Selver; Skaljic, Nedim

Effect of adhesive strength of bonded area surface // Annals of DAAAM for ... & proceedings of the ... International DAAAM Symposium ..., Volume 22 (2011), No.1; 343-345 (međunarodna recenzija, članak, znanstveni)

scholar.google.com www.daaam.info www.daaam.info

2917.

Soldo, Vladimir; Ruševljan, Miroslav; Lepoša, Leon; Grozdek, Marino; Ćurko, Tonko

Prvo terensko mjerenje toplinskih svojstava tla u Hrvatskoj u svrhu projektiranja toplinskog sustava s dizalicom topline // EGE : energetika, gospodarstvo, ekologija, etika, 5 (2011), 90-92 (podatak o recenziji nije dostupan, pregledni rad, stručni)

2918.

Tovazhnyansky, L.; Kapustenko, P; Ulyev, L.; Boldyryev, S.

Heat Integration Improvement for Benzene Hydrocarbons Extraction from Coke-Oven Gas // Chemical Engineering transactions, 25 (2011), 153-158 doi:10.3303/CET1125026 (međunarodna recenzija, članak, znanstveni)

doi www.aidic.it

2919.

Bošnjaković, Mladen; Martinović, Marko; Džeba, Dajana

Informatička podrška upravljanju materijalom // Zbornik radova (Veleučilište u Slavonskom Brodu), 2 (2011), 1; 25-39 (domaća recenzija, pregledni rad, stručni)

2920.

Ghose, Joyjeet; Sharma, Vinay; Kumar, Nitin; Krishnamurthy, Ajay; Kumar, Surender; Botak, Zlatko

Taguchi-fuzzy based mapping of EDM-machinability of aluminium foam // Tehnički vjesnik, 18 (2011), 4; 595-600 (međunarodna recenzija, članak, znanstveni)

2921.

Kostelac, Milan; Tepić, Jovan; Ćular, Nedjeljko

Justification of the application of tightening elements in the shaft- hub joint // Metalurgija, 50 (2011), 1; 57-61 (recenziran, pregledni rad, stručni)

2922.

Stamenković, Dragi; Perić, Mato

Determination of Residual Stresses in Welded Pipes Using a Simplified Heat Source // Scientific Technical Review, 61 (2011), 1; 12-16 (podatak o recenziji nije dostupan, članak, znanstveni)

2923.

Osman, Krešimir; Stamenković, Dragi; Lazarević, Mihailo

Robust Product Architecture Development Combining Matrix-Based Approaches and Function-Based Failure Propagation Method – M-FBFP Framework // FME Transaction, 39 (2011), 1; 145-156 (međunarodna recenzija, članak, znanstveni)

2924.

Smoljan, Božo; Iljkić, Dario; Traven, Furio

Fracture of Jaw Arm Made of Cast Steel GS-42CrMo4 // Strojarstvo : časopis za teoriju i praksu u strojarstvu, 53 (2011), 4; 307-310 (podatak o recenziji nije dostupan, prethodno priopćenje, znanstveni)

2925.

Marunić, Gordana

Tooth Root Stress Modifying Factors of Webbed Gears // Machines, Technologies, Materials, 10 (2011), 38-41 (podatak o recenziji nije dostupan, članak, znanstveni)

2926.

Heinonen, Martti; Zvizdić, Davor; Šestan, Danijel

Intercomparison of the Dew-Point Temperature Realizations at LPM and MIKES in the Range from −70 ◦C to +20 ◦C // International journal of thermophysics, 33 (2011), 8/9; 1451-1457 doi:10.1007/s10765-011-1105-9 (međunarodna recenzija, članak, znanstveni)

doi link.springer.com

2927.

Smoljan, Božo; Iljkić, Dario; Novak, Hrvoje

Prediction of quenched and tempered steel and cast steel properties // Journal of achievements in materials and manufacturing engineering, 49 (2011), 2; 369-374 (podatak o recenziji nije dostupan, članak, znanstveni)

2928.

Stojkov, Marinko; Hnatko, Emil; Kljajin, Milan; Živić, Marija; Hornung, Krunoslav

CHP and CCHP today // International journal of electrical and computer engineering systems, 2 (2011), 2; 75-79 (međunarodna recenzija, pregledni rad, znanstveni)

ijeces.ferit.hr

2929.

Ćosić, Predrag; Lisjak, Dragutin; Antolić, Dražen

Regression analysis and neural networks as methods for production time estimation // Tehnički vjesnik, 18 (2011), 4; 479-484 (međunarodna recenzija, članak, znanstveni)

2930.

Štimac, Goranka; Braut, Sanjin; Žigulić, Roberto

Structural Optimization of Turbine Generator Foundation with Frequency Constraint // Strojarstvo, 53 (2011), 5; 389-398 (međunarodna recenzija, članak, znanstveni)

2931.

Stojkov, Marinko; Hnatko, Emil; Šljivac, Damir; Topić, Danijel

MOGUĆNOSTI ISKORIŠTAVANJA ENERGIJE SUNCA I ENERGIJE VJETRA ZA NAVODNJAVANJE POLJOPRIVREDNIH ZEMLJIŠTA // Journal of Scientific Society of Power Machines, Tractors and Maintenance, 16 (2011) (podatak o recenziji nije dostupan, članak, znanstveni)

2932.

Šimunović, Katica; Draganjac, Tomislav; Lujić, Roberto

Supplier Selection using a Multiple Criteria Decision Making Method // Strojarstvo, 53 (2011), 4; 293-300 (međunarodna recenzija, članak, znanstveni)

2933.

Vesenjak, Matej; Gačnik, Franci; Krstulović-Opara, Lovre; Ren, Zoran

Behavior of composite advanced pore morphology foam // Journal of composite materials, 45 (2011), 26; 2823-2831 doi:10.1177/0021998311410489 (međunarodna recenzija, članak, znanstveni)

doi jcm.sagepub.com

2934.

Grilec, Krešimir; Hrabrić, Ivan; Marić, Gojko

Energy Absorption of Reinforced Aluminium Foams // Strojarstvo, 53 (2011), 4; 259-264 (međunarodna recenzija, članak, znanstveni)

2935.

Živković, Dražen; Gabrić, Igor; Šitić, Slaven

Popravak zavarivanjem konstrukcija iz titanovih legura // Strojarstvo : časopis za teoriju i praksu u strojarstvu, 53 (2011), 4; 319-326 (podatak o recenziji nije dostupan, prethodno priopćenje, znanstveni)

hrcak.srce.hr

2936.

Banovac, Eraldo; Tešnjak, Sejid; Pavlović, Darko

Analyzing the Properties of Mobius Capacitors // International review on modelling and simulations, 4 (2011), 6; 3292-3300 (međunarodna recenzija, članak, znanstveni)

2937.

Krajinović, Mario; Marić, Gojko; Šnajdar, Mateja

Design of Natural Fiber Reinforced Polymer Composite // Strojarstvo, 53 (2011), 4; 265-270 (međunarodna recenzija, članak, znanstveni)

2938.

Šimunović, Goran; Šarić, Tomislav; Svalina, Ilija

Adaptive Neuro-Fuzzy Inference System Model for Technological Parameters Prediction // Strojarstvo, 53 (2011), 4; 311-318 (podatak o recenziji nije dostupan, prethodno priopćenje, znanstveni)

2939.

Rubeša, Rajko; Fafandjel, Nikša; Kolić, Damir

Procedure for estimating the effectiveness of ship modular outfitting // Engineering review : znanstveni časopis za nove tehnologije u strojarstvu, brodogradnji i elektrotehnici, 31 (2011), 1; 55-62 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada

2940.

Kolić, Damir; Fafandjel, Nikša; Rubeša, Rajko

Applying lean quality with risk analysis to aid shipyard block assembly decision making // Strojarstvo, 53 (2011), 2; 73-82 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada

2941.

Jelaska, Damir

On the Goodman's Fatigue Safety Factor // Advanced engineering, 5 (2011), 1; 27-34 (podatak o recenziji nije dostupan, članak, znanstveni)

Pristup cjelovitom tekstu rada

2942.

Novaković, Branko; Kasać, Josip; Kirola, Marijo

Dynamic Model of Nanorobot Motion in Multipotential Field // Strojarstvo, 53 (2011), 2; 103-111 (podatak o recenziji nije dostupan, prethodno priopćenje, znanstveni)

2943.

Gordić, Borislav

Doprinos određivanju kriterija i mjerila za ocjenjivanje operativnog planiranja i praćenja proizvodnje // Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 18 (2011), 109-115 (međunarodna recenzija, članak, znanstveni)

2944.

Vukelić, Goran; Brnić, Josip; Brčić, Marino

Numerical Assessment of Crack Driving force for Two Types of Steel // Transactions of FAMENA, 35 (2011), 4; 15-20 (međunarodna recenzija, članak, znanstveni)

2945.

Budić, Ivan; Cvjetko, Igor; Novoselović, Daniel

Poroznost odljevaka pri skrućivanju aluminijskih slitina u vakuumu // Ljevarstvo : glasilo Hrvatskog udruženja za ljevarstvo, 53 (2011), 3-4; 77-81 (podatak o recenziji nije dostupan, članak, znanstveni)

2946.

Bilić, Boženko; Radojičić, Miroslav; Veža, Ivica; Nešić, Zoran

Some considerations on the development of the information subsystem for production planning // Journal of Engineering Mangement and Competitiveness, 1 (2011), 1-2; 10-15 (podatak o recenziji nije dostupan, članak, znanstveni)

www.tfzr.uns.ac.rs

2947.

Bakić, Ante; Semenski, Damir; Jecić, Stjepan

Contact caustics measurements expanded to anisotropic materials // Archives of Civil and Mechanical Engineering, XI (2011), 3; 497-505 (međunarodna recenzija, članak, znanstveni)

Pregled po znanstvenom području: Strojarstvo (MB: 2.11)

Radovi u časopisima

Znanstveni i pregledni radovi