Pregled po znanstvenom području: Strojarstvo (MB: 2.11)

1948.

Boldyryev, Stanislav; Mikulčić, Hrvoje; Krajačić, Goran; Duić, Neven

Waste heat utilisation of Croatian cement industry accounting Total Site demands // Computer-aided chemical engineering, 38 (2016), 2223-2228 doi:10.1016/B978-0-444-63428-3.50375-1 (međunarodna recenzija, članak, znanstveni)

doi dx.doi.org

1949.

Vuilleumier, David; Taritaš, Ivan; Wolk, Benjamin; Kozarac, Darko; Saxena, Samveg; Dibble, Robert

Multi-level computational exploration of advanced combustion engine operating strategies // Applied energy, 184 (2016), 1273-1283 doi:10.1016/j.apenergy.2016.05.043 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com doi.org

1950.

Terze, Zdravko; Mueller, Andreas; Zlatar, Dario

Singularity-Free Time Integration of Rotational Quaternions Using Non-Redundant Ordinary Differential Equations // Multibody system dynamics, 38 (2016), 3; 201-225 doi:10.1007/s11044-016-9518-7 (međunarodna recenzija, članak, znanstveni)

doi link.springer.com

1951.

Rauch, Martina; Galović, Antun; Virag, Zdravko

Optimization of combined Brayton-Rankine cycle with respect to the total thermal efficiency // Transactions of FAMENA, 40 (2016), SI-1; 1-10 (međunarodna recenzija, članak, znanstveni)

hrcak.srce.hr

1952.

Strušnik, Dušan; Marčić, Milan; Golob, Marjan; Hribernik, Aleš; Živić, Marija; Avsec, Jurij

Energy efficiency analysis of steam ejector and electric vacuum pump for a turbine condenser air extraction system based on supervised machine learning modelling // Applied energy, 173 (2016), 386-405 doi:10.1016/j.apenergy.2016.04.047 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

1953.

Janković, Zvonimir; Matić, Ivana; Živić, Marija

Mathematical model of a complete vapor compression refrigeration system with helical coil evaporator flooded in the water // Transactions of FAMENA, 40 (2016), SI-1; 33-46 (međunarodna recenzija, članak, znanstveni)

1954.

Pešić, Igor; Lanc, Domagoj; Turkalj, Goran

Non-linear global stability analysis of thin-walled laminated beam-type structures // Computers & structures, 173 (2016), 19-30 doi:10.1016/j.compstruc.2016.05.015 (međunarodna recenzija, članak, znanstveni)

doi

1955.

Marković, Kristina; Vrcan, Željko

Influence of tip relief profile modification on involute spur gear stress // Transactions of FAMENA, 40 (2016), 2; 59-70 doi:10.21278/TOF.40205 (međunarodna recenzija, članak, znanstveni)

doi

1956.

Anđelić, Nikola; Žigulić, Roberto; Čanađija, Marko

On the influence of thermal stresses on eigenvalues of a circular saw blade // Journal of Mechanical Engineering Science, Part C : Proceedings of the Institution of Mechanical Engineers, 231 (2016), 96-108 doi:10.1177/0954406216641148 (međunarodna recenzija, članak, znanstveni)

doi journals.sagepub.com journals.sagepub.com journals.sagepub.com

1957.

Garbatov, Yordan; Parunov, Joško; Kodvanj, Janoš; Saad-Eldeen, S.; Guedes Soares, Carlos

Experimental assessment of tensile strength of corroded steel specimens subjected to sandblast and sandpaper cleaning // Marine structures, 49 (2016), 18-30 doi:10.1016/j.marstruc.2016.05.009 (međunarodna recenzija, članak, znanstveni)

doi

1958.

Barkaoui, Alae-Eddine; Boldyryev, Stanislav; Duić, Neven; Krajačić, Goran; Guzović, Zvonimir

Appropriate integration of geothermal energy sources by Pinch approach : Case study of Croatia // Applied energy, 184 (2016), 1343-1349 doi:10.1016/j.apenergy.2016.04.112 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com dx.doi.org

1959.

Boldyryev, Stanislav; Mikulčić, Hrvoje; Mohorović, Zoran; Vujanović, Milan; Krajačić, Goran; Duić, Neven

The improved heat integration of cement production under limited process conditions: A case study for Croatia // Applied thermal engineering, 105 (2016), SI; 839-848 doi:10.1016/j.applthermaleng.2016.05.139 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

1960.

Wang, Xuebin; Deng, Shuanghui; Tan, Houzhang; Adeosun, Adewale; Vujanović, Milan; Yang, Fuxin; Duić, Neven

Synergetic effect of sewage sludge and biomass co-pyrolysis: a combined study in thermogravimetric analyzer and a fixed bed reactor // Energy conversion and management, 118 (2016), 15; 399-405 doi:10.1016/j.enconman.2016.04.014 (međunarodna recenzija, članak, znanstveni)

doi

1961.

Duarte, Isabel; Vesenjak, Matej; Krstulović-Opara, Lovre

Analysis of performance of in-situ carbon steel bar reinforced Al-alloy foams // Composite structures, 152 (2016), 432-443 doi:10.1016/j.compstruct.2016.05.061 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

1962.

Grigoropoulos, Evangelos; Dimitrios, Anastaselos; Nižetić, Sandro; Papadopoulos, Agis M

Effective ventilation strategies for net zero-energy buildings in Mediterranean climates // International Journal of Ventilation, 14 (2016), 4; 1-17 doi:10.1080/14733315.2016.1203607 (međunarodna recenzija, članak, znanstveni)

doi www.tandfonline.com dx.doi.org

1963.

Andersen, Olaf; Vesenjak, Matej; Fiedler, Thomas; Jehring, Ulrike; Krstulović-Opara, Lovre

Experimental and Numerical Evaluation of the Mechanical Behavior of Strongly Anisotropic Light-Weight Metallic Fiber Structures under Static and Dynamic Compressive Loading // Materials, 9 (2016), 5; 398-1 doi:10.3390/ma9050398 (međunarodna recenzija, članak, znanstveni)

doi www.mdpi.com

1964.

Bvumbe, J. Tatenda; Bujlo, Piotr; Tolj, Ivan; Mouton, Kobus; Swart, Gerhard; Pasupathi, Sivakumar; Pollet G. Bruno

Review on management, mechanisms and modelling of thermal processes in PEMFC // Hydrogen and Fuel Cells, 1 (2016), 1-20 doi:10.1515/hfc-2016-0001 (podatak o recenziji nije dostupan, pregledni rad, znanstveni)

doi www.degruyter.com www.degruyter.com

1965.

Tomić, Tihomir; Ćosić, Boris; Schneider, Daniel Rolph

Influence of legislative conditioned changes in waste management on economic viability of MSW- fuelled district heating system ‒ case study // Thermal science, 20 (2016), 4; 1105-1120 doi:10.2298/TSCI160212114T (međunarodna recenzija, članak, znanstveni)

doi thermalscience.vinca.rs thermalscience.vinca.rs

1966.

Murariu, ‪Alin Constantin; Crâsteţi, Sandu; Samardžić, Ivan

Detection of adherence imperfections at the inteface of substrate-coating layer by using infrared thermography // Metalurgija, 55 (2016), 4; 769-771 (međunarodna recenzija, prethodno priopćenje, znanstveni)

hrcak.srce.hr

1967.

Marušić, Vlatko; Samardžić, Ivan; Opačak, Ivan; Marušić, Luka

Influence of induction hardening parameters on the GS30Mn5 weld properties // Metalurgija, 55 (2016), 4; 730-732 (međunarodna recenzija, prethodno priopćenje, znanstveni)

hrcak.srce.hr

1968.

Milinović, Andrijana; Marušić, Vlatko; Samardžić, Ivan

Research into boride layers growth kinetics on C45 carbon steel // Metalurgija, 55 (2016), 4; 671-678 (međunarodna recenzija, članak, znanstveni)

1969.

Skoblar, Ante; Anđelić, Nikola; Žigulić, Roberto

DETERMINATION OF CRITICAL ROTATIONAL SPEED OF CIRCULAR SAWS FROM NATURAL FREQUENCIES OF ANNULAR PLATE WITH ANALOGOUS DIMENSIONS // International Journal for Quality Research, 10 (2016), 1; 177-192 doi:10.18421/IJQR10.01-09 (međunarodna recenzija, članak, znanstveni)

doi ijqr.net

1970.

Glažar, Vladimir; Perčić, Marko; Marunić, Gordana; Franković, Bernard

A Comparative Study of Evolutionary and Search Algorithms for Optimization of Heat Exchanger with Microchannel Coil // Transactions of FAMENA, 40 (2016), SI-1; 75-84 (međunarodna recenzija, članak, znanstveni)

hrcak.srce.hr

1971.

Zelenika, Saša; Marković, Kristina; Rubeša, Josipa

Issues in the mechanical engineering design of high-precision kinematic couplings // Engineering review : znanstveni časopis za nove tehnologije u strojarstvu, brodogradnji i elektrotehnici, 36 (2016), 3; 303-314 (međunarodna recenzija, članak, znanstveni)

1972.

Pavković, Danijel; Sedić, Almir; Guzović, Zvonimir

Oil Drilling Rig Diesel Power-plant Fuel Efficiency Improvement Potentials through Rule-Based Generator Scheduling and Utilization of Battery Energy Storage System // Energy conversion and management, 121 (2016), 194-211 doi:10.1016/j.enconman.2016.05.022 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

1973.

Mikulčić, Hrvoje; Klemeš, Jiří Jaromír; Vujanović, Milan; Urbaniec, Krzysztof; Duić, Neven

Reducing Greenhouse Gasses Emissions by Fostering the Deployment of Alternative Raw Materials and Energy Sources in the Cleaner Cement Manufacturing Process // Journal of cleaner production, 136 (2016), Part B; 119-132 doi:10.1016/j.jclepro.2016.04.145 (međunarodna recenzija, pregledni rad, znanstveni)

doi www.sciencedirect.com dx.doi.org

1974.

Mikulčić, Hrvoje; von Berg, Eberhard; Vujanović, Milan; Wang, Xuebin; Tan, Houzhang; Duić, Neven

Numerical evaluation of different pulverized coal and solid recovered fuel co-firing modes inside a large- scale cement calciner // Applied energy, 184 (2016), 1292-1305 doi:10.1016/j.apenergy.2016.05.012 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

1975.

Pfeifer, Antun; Dominković, Dominik Franjo; Ćosić, Boris; Duić, Neven

Economic feasibility of CHP facilities fueled by biomass from unused agriculture land: Case of Croatia // Energy conversion and management, 125 (2016), 222-229 doi:10.1016/j.enconman.2016.04.090 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada doi www.sciencedirect.com www.sciencedirect.com dx.doi.org

1976.

Puh, Franko; Jurkovic, Zoran; Perinic, Mladen; Brezocnik, Miran; Buljan, Stipo

Optimization of machining parameters for turning operation with multiple quality characteristics using Grey relational analysis // Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 23 (2016), 2; 377-382 doi:10.17559/TV-20150526131717 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada doi

1977.

Pilipović, Ana; Valentan, Bogdan; Šercer, Mladen

Influence of SLS processing parameters according to the new mathematical model on flexural properties // Rapid prototyping journal, 22 (2016), 2; 258-268 doi:10.1108/RPJ-08-2014-0092 (međunarodna recenzija, članak, znanstveni)

doi www.emeraldinsight.com

1978.

Radočaj, Danijel; Jurica, Maja; Kos, Sebastijan; Pavlic, Tomislav

Programiranje industrijskih robota za potrebe robotiziranog zavarivanja // Zavarivanje, 59 (2016), 1/2; 5-11 (podatak o recenziji nije dostupan, članak, znanstveni)

1979.

Šnajdar Musa, Mateja; Marić, Gojko; Grilec, Krešimir

Nanoindentation of closed cell Al alloy foams subjected to different heat treatment regimes // Composites. Part B, Engineering, 89 (2016), 383-387 doi:10.1016/j.compositesb.2013.12.079 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

1980.

Mandić, Matej; Galeta, Tomislav; Raos, Pero; Jugović, Valentino

Dimensional accuracy of camera casing models 3D printed on Mcor IRIS: A case study // Advances ifn production engineering & practices, 11 (2016), 4; 324-332 doi:10.14743/apem2016.4.230 (međunarodna recenzija, članak, znanstveni)

doi apem-journal.org

1981.

Buljac, Andrija; Kozmar, Hrvoje; Džijan, Ivo

Aerodynamic performance of the underbody and wings of an open-wheel race car // Transactions of FAMENA, 40 (2016), 2; 19-34 doi:10.21278/TOF.40202 (međunarodna recenzija, članak, znanstveni)

doi

1982.

Aleksić, V.; Dojčinović, Miroslava; Milović, Lj.; Samardžić, Ivan

Cavitation damages morphology of high-strength low-alloy steel // Metalurgija, 55 (2016), 3; 423-425 (međunarodna recenzija, prethodno priopćenje, znanstveni)

hrcak.srce.hr

1983.

Samardžić, Ivan; Ćorić, A.; Dunđer, Marko

Weldability investigation of fine-grained S1100QL steel // Metalurgija, 55 (2016), 3; 453-456 (međunarodna recenzija, prethodno priopćenje, znanstveni)

hrcak.srce.hr

1984.

Brnić, Josip; Turkalj, Goran; Čanađija, Marko; Lanc, Domagoj; Kršćanski, Sanjin; Brčić, Marino; Li, Qiang; Niu, Jitai

Mechanical Properties, Short Time Creep and Fatigue of an Austenitic Steel // Materials, 9 (2016), 4; 298-1 doi:10.3390/ma9040298 (međunarodna recenzija, članak, znanstveni)

doi www.mdpi.com

1985.

Bušić, Matija; Kožuh, Zoran; Klobčar, Damjan; Samardžić, Ivan

Friction stir welding (FSW) of aluminium foam sandwich panels // Metalurgija, 55 (2016), 3; 473-476 (međunarodna recenzija, prethodno priopćenje, znanstveni)

Pristup cjelovitom tekstu rada hrcak.srce.hr

1986.

Bećirević, Armin; Kolić, Damir; Matulja, Tin

Izrada gantograma dokovanja na plutajućem doku // Pomorski zbornik, Posebno izdanje (2016), 1; 121-129 (podatak o recenziji nije dostupan, prethodno priopćenje, znanstveni)

Pristup cjelovitom tekstu rada

1987.

Vukman, Marina; Kolić, Damir; Fafandjel, Nikša; Hadjina, Marko

DFP analiza izrade robotiziranih međuproizvoda u brodogradnji // Pomorski zbornik, Posebno izdanje (2016), 1; 111-119 doi:10.18048/2016-00.111 (podatak o recenziji nije dostupan, prethodno priopćenje, znanstveni)

Pristup cjelovitom tekstu rada doi hrcak.srce.hr

1988.

Kolić, Damir; Fafandjel, Nikša; Yao, Y. Lawrence

Data mining methodology for determining the optimal model of cost prediction in ship interim product assembly. // Brodogradnja, 67 (2016), 1; 1-18 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada www.fsb.unizg.hr www.fsb.unizg.hr

1989.

Ivić, Stefan; Grbčić, Luka; Družeta, Siniša

Cooperative Random Walk for Pipe Network Layout Optimization // International Journal of Applied Engineering Research, 11 (2016), 4; 2839-2847 (međunarodna recenzija, članak, znanstveni)

www.ripublication.com

1990.

Dominković, Dominik Franjo; Bačeković, Ivan; Ćosić, Boris; Krajačić, Goran; Pukšec, Tomislav; Duić, Neven; Markovska, Nataša

Zero carbon energy system of South East Europe in 2050 // Applied energy, 184 (2016), 1517-1528 doi:10.1016/j.apenergy.2016.03.046 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada doi www.sciencedirect.com www.sciencedirect.com

1991.

Cho, Dae Seung; Kim, Byung Hee; Kim, Jin Hyeong; Vladimir, Nikola; Choi, Tae Muk

Frequency response of rectangular plates with free-edge openings and carlings subjected to point excitation force and enforced displacement at boundaries // International Journal of Naval Architecture and Ocean Engineering, 8 (2016), 2; 117-126 doi:10.1016/j.ijnaoe.2015.06.001 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada doi www.sciencedirect.com

1992.

Krstulović-Opara, Lovre; Vesenjak, Matej; Duarte, Isabel; Ren, Zoran; Domazet, Željko

Infrared thermography as a method for energy absorption evaluation of metal foams // Materials today: proceedings, 3 (2016), 4; 1025-1030 doi:10.1016/j.matpr.2016.03.041 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

1993.

Kotarski, Denis; Benić, Zoran; Krznar, Matija

Sinteza regulatora bespilotne letjelice s četiri rotora // Interdisciplinary description of complex systems, 14 (2016), 2; 236-245 doi:10.7906/indecs.14.2.12 (podatak o recenziji nije dostupan, članak, znanstveni)

Pristup cjelovitom tekstu rada doi indecs.eu

1994.

Vujanović, Milan; Petranović, Zvonimir; Wilfried, Edelbauer; Duić, Neven

Modelling spray and combustion processes in diesel engine by using the coupled Eulerian- Eulerian and Eulerian- Lagrangian method // Energy conversion and management, 125 (2016), Spec. br.; 15-25 doi:10.1016/j.enconman.2016.03.072 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

1995.

Janjić, Mileta; Avdušinović, Hasan; Jurković, Zoran; Bikić, Farzet; Savićević, Sreten

Influence of austempering heat treatment on mechanical and corrosion properties of ductile iron samples // Metalurgija, 55 (2016), 3; 325-328 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada hrcak.srce.hr

1996.

Rosi, Bojan; Grašić, Leon; Đukić, Goran; Opetuk, Tihomir; Lerher, Tone

Simulation-based performance analysis of automated single-tray vertical lift module // International journal of simulation modelling, 15 (2016), 1; 97-108 doi:10.2507/IJSIMM15(1)8.328 (međunarodna recenzija, članak, znanstveni)

doi repozitorij.fsb.hr

1997.

Wang, Jin; Cui, Pei; Vujanović, Milan; Baleta, Jakov; Duić, Neven; Guzović, Zvonimir

Effects of surface deposition and droplet injection on film cooling // Energy conversion and management, 125 (2016), specijalni br.; 51-58 doi:10.1016/j.enconman.2016.03.038 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

1998.

Lototsky, Michael; Tolj, Ivan; Parsons, Adrian; Smith, Fahmida; Sita, Cordellia; Linkov, Vladimir

Performance of electric forklift with low- temperature polymer exchange membrane fuel cell power module and metal hydride hydrogen storage extension tank // Journal of power sources, 316 (2016), 239-250 doi:10.1016/j.jpowsour.2016.03.058 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

1999.

Cumin, Josip; Stoić, Antun; Duspara, Miroslav

Bending accuracy of the HC260Y steel in different V-tool configurations // Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 23 (2016), 1; 229-236 (međunarodna recenzija, članak, znanstveni)

2000.

Ivančević, Darko; Smojver, Ivica

Explicit Multiscale Modelling of Impact Damage on Laminated Composites – Part II: Multiscale Analyses // Composite structures, 145 (2016), 259-268 doi:10.1016/j.compstruct.2016.02.049 (međunarodna recenzija, članak, znanstveni)

doi

2001.

Ivančević, Darko; Smojver, Ivica

Explicit Multiscale Modelling of Impact Damage on Laminated Composites – Part I: Validation of the Micromechanical Model // Composite structures, 145 (2016), 248-258 doi:10.1016/j.compstruct.2016.02.048 (međunarodna recenzija, članak, znanstveni)

doi

2002.

Deng, Shuanghui; Wang, Xuebin; Tan, Houzhang; Mikulčić, Hrvoje; Yang, Fuxin; Li, Zhifeng; Duić, Neven

Thermogravimetric Study on the Co-combustion Characteristics of Oily Sludge with Plant Biomass // Thermochimica acta, 633 (2016), 69-76 doi:10.1016/j.tca.2016.03.006 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

2003.

Michal, P.; Vagaska, A.; Fechova, E.; Gombar M.; Kozak, Drazan

Effect of electrolyte temperature on the thickness of anodic aluminum oxide (AAO) layer // Metalurgija, 55 (2016), 3; 403-406 (međunarodna recenzija, članak, znanstveni)

hrcak.srce.hr

2004.

Rozing, Goran; Alar, Vesna; Marušić, Vlatko; Samardžić, Ivan

Tribocorrosion wear of austenitic and martensitic steels // Metalurgija, 55 (2016), 3; 441-444 (međunarodna recenzija, prethodno priopćenje, znanstveni)

hrcak.srce.hr

2005.

Alar, Vesna; Runje, Biserka; Ivušić, Franjo; Horvatić, Amalija; Mihaljević, Morana

Corrosion behaviour of stainless steel in contact with wine and beer // Metalurgija, 55 (2016), 3; 437-440 (podatak o recenziji nije dostupan, prethodno priopćenje, znanstveni)

hrcak.srce.hr

2006.

Benić, Zoran; Piljek, Petar; Kotarski, Denis

Matematičko modeliranje bespilotne letjelice s četiri rotora // Interdisciplinary description of complex systems, 14 (2016), 1; 88-100 doi:10.7906/indecs.14.1.9 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada doi hrcak.srce.hr indecs.eu

2007.

Buljac, Andrija; Džijan, Ivo; Korade, Ivan; Krizmanić, Severino; Kozmar, Hrvoje

Automobile aerodynamics influenced by airfoil-shaped rear wing // International journal of automotive technology, 17 (2016), 3; 377-385 doi:10.1007/s12239-016-0039-4 (međunarodna recenzija, članak, znanstveni)

doi link.springer.com

2008.

Nguyen, Hoang X.; Lee, Jaehong; Vo, Thuc, P.; Lanc, Domagoj

Vibration and lateral buckling optimisation of thin-walled laminated composite channel-section beams // Composite structures, 143 (2016), 84-92 doi:10.1016/j.compstruct.2016.02.011 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com dx.doi.org

2009.

Senjanović, Ivo; Vladimir, Nikola; Tomić, Marko

On new first-order shear deformation plate theories // Mechanics research communications, 73 (2016), 31-38 doi:10.1016/j.mechrescom.2016.02.005 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com dx.doi.org

2010.

Sjerić, Momir; Taritaš, Ivan; Tomić, Rudolf; Blažić, Mislav; Kozarac, Darko; Lulić, Zoran

Efficiency improvement of a spark-ignition engine at full load conditions using exhaust gas recirculation and variable geometry turbocharger - Numerical study // Energy conversion and management, 125 (2016), 26-39 doi:10.1016/j.enconman.2016.02.047 (međunarodna recenzija, članak, znanstveni)

doi dx.doi.org www.sciencedirect.com

2011.

Medić, Srđan; Groš, Josip; Horvatić, Amalija; Kondić, Živko; Maglić, Leon

Measurement of casting parameters in ZnAlCu3 molds created by additive technology // Metalurgija, 55 (2016), 4; 705-708 (međunarodna recenzija, članak, znanstveni)

hrcak.srce.hr

2012.

Vukelić, Goran; Brnić, Josip

Predicted Fracture Behavior of Shaft Steels with Improved Corrosion Resistance // Metals, 6 (2016), 2; 40-1 doi:10.3390/met6020040 (međunarodna recenzija, članak, znanstveni)

doi www.mdpi.com www.mdpi.com

2013.

Marinić-Kragić, Ivo; Vučina, Damir; Milas, Zoran

3D shape optimization of fan vanes for multiple operating regimes subject to efficiency and noise related excellence criteria and constraints // Engineering Applications of Computational Fluid Mechanics, 10 (2016), 1; 209-227 doi:10.1080/19942060.2016.1149101 (međunarodna recenzija, članak, znanstveni)

doi www.tandfonline.com dx.doi.org

2014.

Barretta, Raffaele; Čanađija, Marko; Marotti de Sciarra, Francesco

A higher-order Eringen model for Bernoulli--Euler nanobeams // Archive of applied mechanics, 68 (2016), 3; 483-495 doi:10.1007/s00419-015-1037-0 (međunarodna recenzija, članak, znanstveni)

doi dx.doi.org link.springer.com

2015.

Čanađija, Marko; Barretta, Raffaelle; Marotti De Sciarra, Francesco

A gradient elasticity model of Bernoulli-Euler nanobeams in non-isothermal environments // European journal of mechanics. A, Solids, 55 (2016), 243-255 doi:10.1016/j.euromechsol.2015.09.008 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com dx.doi.org

2016.

Čanađija, Marko; Barretta Raffaelle; Marroti de Sciarra, Francesco

On functionally graded Timoshenko nonisothermal nanobeams // Composite structures, 135 (2016), 286-296 doi:10.1016/j.compstruct.2015.09.030 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com dx.doi.org

2017.

Penava, Frano; Jakovljević, Suzana; Alar, Željko

Bamboo bicycle - past or future? // Interdisciplinary description of complex systems, 14 (2016), 1; 70-79 doi:10.7906/indecs.14.1.7 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada doi hrcak.srce.hr indecs.eu

2018.

Mikulčić, Hrvoje; Cabezas, Heriberto; Vujanović, Milan; Duić, Neven

Environmental Assessment of Different Cement Manufacturing Processes Based on Emergy and Ecological Footprint Analysis // Journal of cleaner production, 130 (2016), 213-221 doi:10.1016/j.jclepro.2016.01.087 (međunarodna recenzija, članak, znanstveni)

doi dx.doi.org www.sciencedirect.com

2019.

Glavan, Ivica; Prelec, Zmagoslav; Pavković, Branimir

The techno-economic justification for the changing of a system for separate heating/cooling and electrical energy production with a CCHP system with a micro-turbine and absorption refrigeration unit // Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 23 (2016), 1; 99-106 doi:10.17559/TV-20150702122617 (podatak o recenziji nije dostupan, članak, znanstveni)

Pristup cjelovitom tekstu rada doi

2020.

Lototskyy, Mykhaylo V.; Tolj, Ivan; Davids, M. Wafeeq; Parsons, Adrian; Klochko, Yevgeniy; Swanepoel, Dana; Ehlers, Righardt; Louw, Gerhard; van der Westhuizen, Burt; Smith, Fahmida et al.

Metal hydride hydrogen storage and supply systems for electric forklift with low- temperature proton exchange membrane fuel cell power module // International journal of hydrogen energy, 41 (2016), 31; 13831-13842 doi:10.1016/j.ijhydene.2016.01.148 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com dx.doi.org

2021.

Baleta, Jakov; Mikulčić, Hrvoje; Petranović, Zvonimir; Vujanović, Milan; Duić, Neven

Numerical simulation of urea based selective non-catalytic reduction deNOx process for industrial applications // Energy conversion and management, 125 (2016), 59-69 doi:10.1016/j.enconman.2016.01.062 (međunarodna recenzija, članak, znanstveni)

doi dx.doi.org www.sciencedirect.com

2022.

Soldo, Vladimir; Borović, Staša; Lepoša, Leon; Boban, Luka

Comparison of different methods for ground thermal properties determination in a clastic sedimentary environment // Geothermics, 61 (2016), 1-11 doi:10.1016/j.geothermics.2015.12.010 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com dx.doi.org

2023.

Domitran, Zoran; Žeželj, Dragan; Katana, Branko

Influence of contact pressure and sliding speed on the temperature and coefficient of friction in sliding contact between two PET samples // Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 23 (2016), 2; 389-396 doi:10.17559/TV-20151124163215 (međunarodna recenzija, članak, znanstveni)

doi

2024.

Vrsalović, Ladislav; Paić, Tomislav; Alar, Vesna; Stojanović, Ivan; Jakovljević, Suzana; Gudić, Senka; Smoljko, Ivana

The effect of surface treatment AISI 316L welded joints on its corrosion behaviour in chloride solution // Kovové materiály, 54 (2016), 3; 167-174 doi:10.4149/km_2016_3_167 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada doi www.kovmat.sav.sk www.elis.sk

2025.

Safari, Ashkan; Tuković, Željko; Cardiff, Philip; Walter, Maik; Casey, Eoin; Ivanković, Alojz

Interfacial separation of a mature biofilm from a glass surface - A combined experimental and cohesive zone modelling approach // Journal of the mechanical behavior of biomedical materials, 54 (2016), 205-218 doi:10.1016/j.jmbbm.2015.09.013 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

2026.

Safari, Ashkan; Tuković, Željko; Walter, Maik; Casey, Eoin; Ivanković, Alojz

Mechanical properties of a mature biofilm from a wastewater system : from microscale to macroscale level // Biofouling, 31 (2016), 8; 651-664 doi:10.1080/08927014.2015.1075981 (međunarodna recenzija, članak, znanstveni)

doi dx.doi.org www.tandfonline.com

2027.

Jelaska, Damir; Perkušić, Milan; Podrug, Srđan

Kinematic Synthesis of a Novel Type of the Series of Transmissions with Independently Controllable Output Speed // Mechanism and machine theory, 103 (2016), 189-201 doi:10.1016/j.mechmachtheory.2016.02.019 (međunarodna recenzija, članak, znanstveni)

doi dx.doi.org www.sciencedirect.com

2028.

Cho, Dae Seung; Kim, Byung Hee; Vladimir, Nikola; Choi, Tae Muk

Natural vibration analysis of vertical rectangular plates and stiffened panels in contact with fluid on one side // Proceedings of the Institution of Mechanical Engineers Part M-Journal of Engineering for the Maritime Environment, 230 (2016), 1; 114-125 doi:10.1177/1475090214533955 (međunarodna recenzija, članak, znanstveni)

doi journals.sagepub.com

2029.

Kozmar, Hrvoje; Allori, Davide; Bartoli, Gianni; Borri, Claudio

Complex terrain effects on wake characteristics of a parked wind turbine // Engineering structures, 110 (2016), 363-374 doi::10.1016/j.engstruct.2015.11.033 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com dx.doi.org

2030.

Milić Kralj, Dalija; Klarin, Branko

Wing Sails for Hybrid Propulsion of a Ship // Journal of sustainable development of energy, water and environment systems, 4 (2016), 1; 1-13 doi:10.13044/j.sdewes.2016.04.0001 (međunarodna recenzija, članak, znanstveni)

doi www.sdewes.org

2031.

Kamenar, Ervin; Zelenika, Saša; Blažević, David; Maćešić, Senka; Gregov, Goran; Marković, Kristina; Glažar, Vladimir

Harvesting of river flow energy for wireless sensor network technology // Microsystem technologies-micro-and nanosystems-information storage and processing systems, 22 (2016), 7; 1557-1574 doi:10.1007/s00542-015-2778-y (međunarodna recenzija, članak, znanstveni)

doi link.springer.com doi.org

2032.

Perković, Luka; Novosel, Tomislav; Pukšec, Tomislav; Ćosić, Boris; Mustafa, Manal; Krajačić, Goran; Duić, Neven

Modeling of optimal energy flows for systems with close integration of sea water desalination and renewable energy sources: Case study for Jordan // Energy conversion and management, 110 (2016), 249-259 doi:10.1016/j.enconman.2015.12.029 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com dx.doi.org

2033.

Senjanović, Ivo; Vladimir, Nikola; Hadžić, Neven; Tomić, Marko

New first order shear deformation beam theory with in-plane shear influence // Engineering structures, 110 (2016), 169-183 doi:10.1016/j.engstruct.2015.11.032 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com dx.doi.org

2034.

Lesičar, Tomislav; Tonković, Zdenko; Sorić, Jurica

Second-Order Computational Homogenization Approach Using Higher-Order Gradients at Microlevel // Key engineering materials, 665 (2016), 181-184 doi:10.4028/www.scientific.net/KEM.665.181 (međunarodna recenzija, članak, znanstveni)

doi www.scientific.net

2035.

Gao, Zeng; Chen, Z.R.; Wu, Y. H.; Niu, Jitai; Brnić, Josip

Structure and properties of welded joint of high- strength wear-resistant steel NM360 // Materials science and technology, 32 (2016), 4; 299-302 doi:10.1080/02670836.2015.1126425 (međunarodna recenzija, članak, znanstveni)

doi http

2036.

Vesenjak, Matej; Hokamoto, Kazuyuki; Sakamoto, Motoki; Nishi, Takuya; Krstulović-Opara, Lovre; Ren, Zoran

Mechanical and microstructural analysis of unidirectional porous (UniPore) copper // Materials and design, 90 (2016), 867-880 doi:10.1016/j.matdes.2015.11.038 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

2037.

Vesenjak, Matej; Sulong, Mohd Ayub; Krstulović-Opara, Lovre; Borovinšek, Matej; Mathier, Vincent; Fiedler, Thomas

Dynamic compression of aluminium foam derived from infiltration casting of salt dough // Mechanics of materials, 93 (2016), 96-108 doi:10.1016/j.mechmat.2015.10.012 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

2038.

Buljac, Andrija; Pospišil, Stanislav; Kozmar, Hrvoje; Kuznetsov, Sergey; Kral, Radomil

Flutter derivatives of the Kao-Pin Hsi cable- supported bridge // Applied Mechanics and Materials, 821 (2016), 172-179 doi:10.4028/www.scientific.net/AMM.821.172 (podatak o recenziji nije dostupan, članak, znanstveni)

doi www.scientific.net

2039.

Lela, Branimir; Barišić, Marin; Nižetić, Sandro

Cardboard/sawdust briquettes as biomass fuel : Physical-Mechanical and thermal characteristics // Waste management, 47 (2016), Part B; 236-245 doi:10.1016/j.wasman.2015.10.035 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com dx.doi.org

2040.

Vučina, Damir; Marinić-Kragić, Ivo; Milas, Zoran

Numerical models for robust shape optimization of wind turbine blades // Renewable energy, 87 (2016), 2; 849-862 doi:10.1016/j.renene.2015.10.040 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

2041.

Ruggiero, Alessandro; Hloch, Sergej; Kozak, Drazan and Valasek Petr

Analytical fluid film force calculation in the case of short bearing with a fully developed turbulent flow // Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 230 (2016), 4; 395-401 doi:10.1177/1350650115602510 (međunarodna recenzija, članak, znanstveni)

doi pij.sagepub.com

2042.

Lesičar, Tomislav; Sorić, Jurica; Tonković, Zdenko

Large strain, two-scale computational approach using C1 continuity finite element employing a second gradient theory // Computer methods in applied mechanics and engineering, 298 (2016), 303-324 doi:10.1016/j.cma.2015.09.017 (međunarodna recenzija, članak, znanstveni)

doi dx.doi.org www.sciencedirect.com

2043.

Stevanović, Milan; Marjanović, Dorian; Štorga, Mario

Idea Assessment and Selection in Product Innovation - the Empirical Research Results // Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 23 (2016), 6; 1707-1716 doi:10.17559/TV-20151103120545 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada doi

2044.

Stevanović, Milan; Marjanović, Dorian; Štorga, Mario

Idea management in product innovation - the empirical research results // Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 23 (2016), 5; 1285-1294 doi:10.17559/TV-20150603223629 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada doi

2045.

Dadić, Zvonimir; Živković, Dražen; Čatipović, Nikša

Tribological wear mechanisms of molds for high pressure die casting // Metalurgija, 55 (2016), 2; 249-252 (međunarodna recenzija, pregledni rad, znanstveni)

hrcak.srce.hr

2046.

Cipek, Mihael; Škugor, Branimir; Čorić, Mirko; Kasać, Josip; Deur, Joško

Control variable optimisation for an extended range electric vehicle // International journal of powertrains, 5 (2016), 1; 30-54 doi:10.1504/IJPT.2016.075183 (podatak o recenziji nije dostupan, članak, znanstveni)

doi www.inderscience.com

2047.

Janjić, Mileta; Vukčević, Milan; Jurković, Zoran; Šibalić, Nikola; Savičević, Sreten

PHYSICAL MODELLING AND NUMERICAL FINITE ELEMENT METHOD (FEM) SIMULATION OF FORGING IN OPEN DIE OF ALLOY AIMgSi0, 5 // Metalurgija, 55 (2016), 2; 181-184 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada

2048.

Tomić, Tanja; Kožuh, Zoran; Garašić, Ivica; Samardžić, Ivan

Effects of hydrogen upon the properties of thermo mechanical controlled process (TMCP) steel // Metalurgija, 55 (2016), 1; 99-102 (međunarodna recenzija, pregledni rad, znanstveni)

2049.

Lazić, V.; Sedmak, Aleksandar; Samardžić, Ivan; Aleksandrović, Srbislav; Milosavljević, Dragan; Arsić, Dušan; Đorđević, M.

Determination of bond strength between the hard-faced (HF) layer and the base material (BM) of forging dies // Metalurgija, 55 (2016), 1; 91-94 (međunarodna recenzija, prethodno priopćenje, znanstveni)

hrcak.srce.hr

2050.

Cumin, Josip; Samardžić, Ivan; Maglić, Leon

Statistical analysis of the V-tool bending process parameters in the bending of HC260Y steel // Metalurgija, 55 (2016), 2; 200-202 (međunarodna recenzija, prethodno priopćenje, znanstveni)

hrcak.srce.hr

2051.

Škec, Stanko; Štorga, Mario; Tečec Ribarić, Zlatka

Work sampling of product development activities // Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 23 (2016), 6; 1547-1554 doi:10.17559/TV-20150606151030 (međunarodna recenzija, članak, znanstveni)

doi

2052.

Aleksandrov Fabijanić, Tamara; Franz, Mladen; Alar, Željko

Influential factors on hardness uniformity of Vickers hardness blocks for high hardness range // Measurement, 78 (2016), 358-365 doi:10.1016/j.measurement.2015.07.030 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com dx.doi.org

2053.

Zubić, Alen; Bojčetić, Nenad; Žeželj, Dragan

Integration of private social network in PLM systems // Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 23 (2016), 2; 611-616 doi:10.17559/TV-20150430143932 (međunarodna recenzija, članak, znanstveni)

doi

2054.

Aleksandrov Fabijanić, Tamara; Alar, Željko; Ćorić, Danko

Influence of Consolidation Process and Sintering Temperature on Microstructure and Mechanical properties of Near Nano- and Nanostructured WC-Co Cemented Carbides // International journal of refractory metals & hard materials, 54 (2016), 82-89 doi:10.1016/j.ijrmhm.2015.07.017 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

2055.

Brnić, Josip; Turkalj, Goran; Kršćanski, Sanjin; Niu, Jitai; Li, Qiang

Changes in the Material Properties of Steel 1.4762 Depending on the Temperature // High temperature materials and processes, 35 (2016), 8; 761-767 doi:10.1515/htmp-2015-0075 (međunarodna recenzija, članak, znanstveni)

doi www.degruyter.com www.degruyter.com

2056.

Gracin, Leo; Režek Jambrak, Anet; Juretić, Hrvoje; Dobrović, Slaven; Barukčić, Irena; Grozdanović, Martin; Smoljanić, Goran

Influence of high power ultrasound on Brettanomyces and lactic acid bacteria in wine in continuous flow treatment // Applied acoustics, 103 (2016), Part B; 143-147 doi:10.1016/j.apacoust.2015.05.005 (međunarodna recenzija, članak, znanstveni)

doi dx.doi.org www.sciencedirect.com

2057.

Sjerić, Momir; Kozarac, Darko; Ormuž, Krunoslav

Cycle-simulation turbulence modelling of IC engines // International journal of automotive technology, 17 (2016), 1; 51-61 doi:10.1007/s12239-016-0004-2 (međunarodna recenzija, članak, znanstveni)

doi link.springer.com

2058.

Vukčević, Vuko; Jasak, Hrvoje; Malenica, Šime

Decomposition Model for Naval Hydrodynamic Applications. Part II: Verification and Validation // Ocean engineering, 121 (2016), 76-88 doi:10.1016/j.oceaneng.2016.05.021 (međunarodna recenzija, članak, znanstveni)

doi dx.doi.org www.sciencedirect.com

2059.

Stipančić, Tomislav; Jerbić, Bojan; Ćurković, Petar

A context-aware approach in realization of socially intelligent industrial robots // Robotics and computer-integrated manufacturing, 37 (2016), 79-89 doi:10.1016/j.rcim.2015.07.002 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com dx.doi.org

2060.

Zhao, Guoying; Pinte, Gregory; Alujević, Neven; Depraetere, Bruno; Sas, Paul

Adaptive-passive control of structure-borne noise of rotating machinery using a pair of shunted inertial actuators // Journal of intelligent material systems and structures, 27 (2016), 12; 1584-1599 doi:10.1177/1045389X15600080 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada doi jim.sagepub.com

2061.

Tomić, Tanja; Kožuh, Zoran; Garašić, Ivica; Samardžić, Ivan

Effects of hydrogen upon the properties of thermo mechanical controlled process (TMCP) steel // Metalurgija, 55 (2016), 1; 99-102 (recenziran, pregledni rad, stručni)

hrcak.srce.hr

2062.

Stojšić, Josip; Raos, Pero; Kalendova, Alena

A study of structure and tensile properties of polyamide 12/clay nanocomposites // Polymer composites, 37 (2016), 3; 684-691 doi:10.1002/pc.23225 (međunarodna recenzija, članak, znanstveni)

doi onlinelibrary.wiley.com

2063.

Vukelić, Goran; Brnić, Josip

Analysis of Austenitic Stainless Steels (AISI 303 and AISI 316Ti) Regarding Crack Driving Forces and Creep Responses // Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 230 (2016), 3; 699-704 doi:10.1177/1464420714565635 (međunarodna recenzija, članak, znanstveni)

doi pil.sagepub.com pil.sagepub.com

2064.

Glažar, Vladimir; Marunić, Gordana; Perčić, Marko; Butković, Zlatko

Application of glyph-based techniques for multivariate engineering visualization // Engineering optimization, 48 (2016), 1; 39-52 doi:10.1080/0305215X.2014.994866 (međunarodna recenzija, članak, znanstveni)

doi www.tandfonline.com www.tandfonline.com

2065.

Škugor, Branimir; Deur, Joško

Delivery Vehicle Fleet Data Collection, Analysis, and Naturalistic Driving Cycles Synthesis // International journal of innovation and sustainable development, 10 (2016), 1; 19-39 doi:10.1504/IJISD.2016.073412 (međunarodna recenzija, članak, znanstveni)

doi

2066.

Klapan, Ivica; Raos, Pero; Galeta, Tomislav; Kubat, Goranka

Virtual reality in rhinology – a new dimension of clinical experience // ENT - ear nose & throat journal, 95 (2016), 7; E23-E28 (međunarodna recenzija, članak, znanstveni)

www.entjournal.com

2067.

Mihanović, Luka; Matika, Dario; Bernečić, Dean

High speed radial marine diesel engine suitability maintenance model // Pomorstvo : scientific journal of maritime research, 29 (2015), 2; 133-142 (međunarodna recenzija, članak, znanstveni)

hrcak.srce.hr

2068.

Sušić, Aleksandar; Žokalj, Martina; Kasović, Mario

Nestabilnost slabinske kralježnice kao faktor rizika pri dizanju gabaritnog tereta // Sigurnost : časopis za sigurnost u radnoj i životnoj okolini, 57 (2015), 1; 1-9 (međunarodna recenzija, članak, znanstveni)

hrcak.srce.hr hrcak.srce.hr

2069.

Askarova, A; Bolegenova, S; Jankoski, Zlatko; Bekmukhamet, A; Ospanova, Sh.; Tolymkanova, B.; Nagashybay Zh.

Numerical investigation of heat transfer characteristics of pulverized coal in the combustion chambers of the heat energy centers of Kazakhstan // Physical Sciences and Technology, 2 (2015), 2; 33-42 doi:10.26577/2409-6121-2015-2-2-33-42 (recenziran, članak, znanstveni)

Pristup cjelovitom tekstu rada doi

2070.

Curtis, Maria do Carmo; Roldo, Liane

Desenho Técnico Nível Básico a Mão Livre: um instrumento didático // Educação Gráfica, 19 (2015), 03; 55-66 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada www.educacaografica.inf.br

2071.

Bojanić, Branislav

Analiza nadzora sustava upravljanja kvalitetom od strane najvišeg vodstva organizacije // Tehnički glasnik, Vol.9 (2015), No.3; 321-326 (međunarodna recenzija, pregledni rad, znanstveni)

2072.

Kukec, Goran

Decreasing Engineering Time with Variable CAD Models: Parametric Approach to Process Optimization // Computer-Aided Design and Applications, 12 (2015), 5; 651-661 doi:10.1080/16864360.2015.1014744 (međunarodna recenzija, članak, znanstveni)

doi doi.org

2073.

Marušić, Ante; Lončar, Dražen

Model predictive control in small family house: extravagance or future of energy consumption in households // IFAC-PapersOnLine (Kidlington), 48 (2015), 1; 701-702 doi:10.1016/j.ifacol.2015.05.200 (međunarodna recenzija, članak, znanstveni)

doi

2074.

Alar, Željko; Mandić, Davor; Dugorepec, Andrija; Sakoman, Matija

Application of instrumented Charpy method in characterisation of materials // Interdisciplinary description of complex systems, 13 (2015), 3; 479-487 doi:10.7906/indecs.13.3.12 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada doi hrcak.srce.hr indecs.eu

2075.

Jakovljević, Ivan; Perčić, Marko

Dependence of changes in pressure of superheated steam upon reducing heat drop in the throttling regulation of steam turbines // Engineering review, 35 (2015), 2; 205-210 (recenziran, članak, znanstveni)

hrcak.srce.hr hrcak.srce.hr

2076.

Michael, Jee Joe; Iniyan, S.; Goić, Ranko

Flat plate solar photovoltaic–thermal (PV/T) systems : A reference guide // Renewable & sustainable energy reviews, 51 (2015), 62-88 doi:10.1016/j.rser.2015.06.022 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com doi.org

2077.

Zvizdić, Davor; Heinonen, Martti; Sestan, Danijel

Investigation of Primary Dew-Point Saturator Efficiency in Two Different Thermal Environments // International journal of thermophysics, 36 (2015), 8; 2215-2230 doi:10.1007/s10765-015-1899-y (međunarodna recenzija, članak, znanstveni)

doi link.springer.com

2078.

Ochkov, Valerij; Pisačić, Katarina

Journey from St. Petersburg to Moscow or model of gravity train in Mathcad // Tehnički glasnik, 9 (2015), 1; 1-5 (podatak o recenziji nije dostupan, članak, znanstveni)

Pristup cjelovitom tekstu rada

2079.

Marušić, Vlatko; Kovalevskyy, Sergiy; Samardžić, Ivan; Opačak, Ivan; Marušić, Luka

Pipes life prolonging possibility in boilers fired up by municipal waste // Applied mechanics and materials, 806 (2015), 30-39 doi:10.4028/www.scientific.net/AMM.806.30 (međunarodna recenzija, članak, znanstveni)

doi www.scientific.net

2080.

Kram, Mateja; Tošanović, Nataša; Hegedić, Miro

Kaizen Approach to Supply Chain Management: First Step for Transforming Supply Chain into Lean Supply Chain // Annals of the Faculty of Engineering Hunedoara, 13 (2015), 1; 161-164 (podatak o recenziji nije dostupan, članak, znanstveni)

Pristup cjelovitom tekstu rada annals.fih.upt.ro annals.fih.upt.ro

2081.

Đukić, Predrag; Wolf, Hinko; Jani, Barle

Simple dynamic model of wind turbine tower with experimental verification // International journal for engineering modelling, 28 (2015), 1-4; 49-59 (podatak o recenziji nije dostupan, članak, znanstveni)

repozitorij.fsb.hr

2082.

Tomašić, Danijel; Ilinčić, Petar; Pilipović, Ana

Influence of layers lay-up on the mechanical properties of hybrid composites in field of aeronautics // Polimeri : časopis za plastiku i gumu, 36 (2015), 1-2; 5-10 (međunarodna recenzija, članak, znanstveni)

2083.

Čulig-Tokić, Dario; Krajačić, Goran; Doračić, Borna; Mathiesen, Brian Vad; Krklec, Robert; Larsen, Jesper Møller

Comparative analysis of the district heating systems of two towns in Croatia and Denmark // Energy (Oxford), 92 (2015), 435-443 doi:10.1016/j.energy.2015.05.096 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

2084.

Baličević, Pavo; Baličević, Vedrana; Livazović, Aleksandar

Energy efficiency of biogas-solar plant // Bulletin of University of Agricultural Sciences and Veterinary Medicine Cluj-Napoca Agriculture., 72 (2015), 2; 339-346 (podatak o recenziji nije dostupan, članak, znanstveni)

2085.

Milovančević, Miloš; Vračar, Ljubomir; Troha, Sanjin

APPLICABLE IMPORTANCE OF VIBRO_DIAGNOSTICS IN PREDICTABLE MAINTENANCE OF "NAISUS" AQUEDUCT SYSTEM // Machine Design (Novi Sad), 7 (2015), 3; 97-100 (podatak o recenziji nije dostupan, članak, znanstveni)

2086.

Miljković, Dubravko

Brief Review of Vibration Based Machine Condition Monitoring // HDKBR info, 16 (2015), 14-23 (međunarodna recenzija, pregledni rad, znanstveni)

Pristup cjelovitom tekstu rada www.crsntdjournal.hdkbr.hr

2087.

Vukelić, Goran

Failure study of a cracked speed boat steering wheel // Case studies in engineering failure analysis, 4 (2015), 76-82 doi:10.1016/j.csefa.2015.09.002 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com www.sciencedirect.com

2088.

Djurović, Dušan; Bulatovic, Miodrag; Soković, Mirko; Stoić, Antun

MEASUREMENT OF MAINTENANCE EXCELLENCE // Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 22 (2015), 5; 1263-1268 doi:10.17559/TV-20140922094945 (međunarodna recenzija, članak, znanstveni)

doi

2089.

Maruda, Radoslaw; Legutko, Stanislaw; Krolczyk, Grzegorz; Lukianowicz, Czeslaw; Stoić, Antun

EFFECT OF ANTI-WEAR ADDITIVE ON CUTTING TOOL AND SURFACE LAYER OF WORKPIECE STATE UNDER MQCL CONDITIONS // Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 53 (2015), 2; 1219-1223 doi:10.17559/TV-20140905132417 (međunarodna recenzija, članak, znanstveni)

doi

2090.

Bošnjaković, Alen; Pollinger, Florian; Meiners- Hagen, Karl.

Improving the traceability chain in geodetic length measurements by the new robust interferometer TeleYAG // Journal of trends in the development of machinery and associated technology, 19 (2015), 117-120 (podatak o recenziji nije dostupan, članak, znanstveni)

www.tmt.unze.ba

2091.

Meiners-Hagen, Karl; Bošnjaković, Alen; Köchert, Paul; Pollinger, Florian.

Air index compensated interferometer as a prospective novel primary standard for baseline calibrations // Measurement science & technology, 26 (2015), 8; 084002/1-084002/8 doi:10.1088/0957-0233/26/8/084002 (međunarodna recenzija, članak, znanstveni)

doi iopscience.iop.org

2092.

Zima, Antonija; Pugar, Daniel; Haramina, Tatjana

Toplinski aktivirano samoobnavljanje ionomera nakon balističkog testa - mehanička svojstva // Tehnički glasnik, 9 (2015), 4; 410-414 (podatak o recenziji nije dostupan, članak, znanstveni)

www.unin.hr

2093.

Antabak, Anko; Barišić, Branimir; Andabak, Matej; Bradić, Lucija; Brajčinovic, Melita; Haramina, Tatjana; Halužan, Damir; Fuchs, Nino; Ćurković, Selena; Luetić, Tomislav et al.

Fizikalna svojstva sadrenih zavoja // Liječnički vjesnik, 137 (2015), 11-12; 372-376 (međunarodna recenzija, članak, znanstveni)

hrcak.srce.hr

2094.

Tudić, Vladimir; Marochini, Mario

DC Conductivity of Composite Silicon Thin Films // Scientific review (Rahim Yar Khan), 1 (2015), 5; 92-98 (podatak o recenziji nije dostupan, članak, znanstveni)

www.arpgweb.com ideas.repec.org www.arpgweb.com

2095.

Rastović, Danilo

From Non-Markovian Processes to Stochastic Real Time Control for Tokamak Plasma Turbulence Via Artificial Intelligence Techniques // Journal of fusion energy, 34 (2015), 2; 207-215 doi:10.1007/s10894-014-9791-5 (međunarodna recenzija, članak, znanstveni)

doi link.springer.com

2096.

Ivić, Stefan

Sensitivity analysis of S-lay pipe-laying configuration // International Journal of Applied Engineering Research, 10 (2015), 22; 43250-43255 (međunarodna recenzija, članak, znanstveni)

www.ripublication.com

2097.

Veža, Ivica; Gjeldum, Nikola; Mladineo, Marko; Peko, Ivan

Analiza postojećeg stanja hrvatske industrije u odnosu na Industriju 4.0 // Zavarivanje, 58 (2015), 133-138 (podatak o recenziji nije dostupan, prethodno priopćenje, znanstveni)

2098.

Milovanović, Vladimir; Živković, Miroslav; Jovičić, Gordana; Živković, Jelena; Kozak, Dražan

The Influence of Wagon Structure Part Shape Optimization on Ultimate Fatigue Strength // Transactions of FAMENA, 39 (2015), 4; 23-35 (međunarodna recenzija, članak, znanstveni)

www.fsb.unizg.hr

2099.

Marotti de Sciarra, Francesco; Čanađija, Marko; Barretta, Raffaelle

A gradient model for torsion of nanobeams // Comptes rendus. Mécanique, 343 (2015), 4; 289-300 doi:10.1016/j.crme.2015.02.004 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com dx.doi.org

2100.

Bartels, Alexander; Bartel, Thorsten; Čanađija, Marko; Mosler, Jörn

On the thermomechanical coupling in dissipative materials : A variational approach for generalized standard materials // Journal of the mechanics and physics of solids, 82 (2015), 218-234 doi:10.1016/j.jmps.2015.04.011 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com dx.doi.org

2101.

Pavković, Danijel; Lobrović, Mihael; Hrgetić, Mario; Komljenović, Ante

A Design of Cascade Control System and Adaptive Load Compensator for Battery/Ultracapacitor Hybrid Energy Storage-based Direct Current Microgrid // Energy conversion and management, 114 (2015), 154-167 doi:10.1016/j.enconman.2016.02.005 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com dx.doi.org

2102.

Samardžić, Ivan; Čikić, Ante; Dunđer, Marko

ANALYTICAL HEAT CONDUCTION MODELS AT ARC FUSION WELDING // Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 22 (2015), 6; 1641-1647 (međunarodna recenzija, pregledni rad, znanstveni)

2103.

Pandilov, Zoran; Milecki, Andrzej; Nowak, Amadeusz; Górski, Filip; Grajewski, Damian; Ciglar, Damir; Mulc, Tihomir; Klaić, Miho

Virtual Modelling and Simulation of a CNC Machine Feed Drive System // Transactions of FAMENA, 39-4 (2015), 37-54 (međunarodna recenzija, članak, znanstveni)

2104.

Smoljan, Božo; Iljkić, Dario; Tomašić, Neven

Mathematical modelling of hardness of quenched and tempered steel // Archives of Materials Science and Engineering, 74 (2015), 2; 85-93 (međunarodna recenzija, članak, znanstveni)

2105.

Smoljan, Božo; Iljkić, Dario; Totten, George E.

Mathematical Modeling and Simulation of Hardness of Quenched and Tempered Steel // Metallurgical and materials transactions. B, 46 (2015), 6; 2666-2673 doi:10.1007/s11663-015-0451-6 (međunarodna recenzija, članak, znanstveni)

doi link.springer.com

2106.

Cash, Phillip; Štorga, Mario

Multifaceted assessment of ideation: using networks to link ideation and design activity // Journal of engineering design, 26 (2015), 10-12; 391-415 doi:10.1080/09544828.2015.1070813 (međunarodna recenzija, članak, znanstveni)

doi www.tandfonline.com

2107.

Borić, Andrej; Maričić, Sven; Cukor, Goran

Application of the CAD/CAM System in the Production of the Anatomic Insole // Applied Mechanics and Materials, 808 (2015), 221-225 doi:10.4028/www.scientific.net/AMM.808.221 (međunarodna recenzija, članak, znanstveni)

doi

2108.

Matijašević, Dubravko; Terze, Zdravko; Vrdoljak, Milan

Composed Fluid-Structure Interaction Spatial Interface for Horizontal Axis Wind Turbine Rotor // Journal of computational and nonlinear dynamics, 10 (2015), 4; 041009-1 doi:10.1115/1.4029749 (međunarodna recenzija, članak, znanstveni)

doi computationalnonlinear.asmedigitalcollection.asme.org

2109.

Jurčević Lulić, Tanja

Ergonomija i sigurnost djece // Paediatria Croatica. Supplement, 59 (2015), 155-160 (podatak o recenziji nije dostupan, pregledni rad, znanstveni)

2110.

Godec, Damir; Vidović, Ivan; Šercer, Mladen

Optimiranje parametara niskobudžetnog 3D tiskanja // Tehničke znanosti : glasnik Akademije tehničkih znanosti Hrvatske, 19 (2015), 1; 3-8 (podatak o recenziji nije dostupan, članak, znanstveni)

2111.

Mikulandrić, Robert; Krajačić, Goran; Duić, Neven; Khavin, Gennadii; Lund, Hendrik; Mathiesen, Brian Vad;

Performance Analysis of a Hybrid District Heating System: a Case Study of a Small town in Croatia // Journal of sustainable development of energy, water and environment systems, 3 (2015), 282-302 doi:10.13044/j.sdewes.2015.03.0022 (međunarodna recenzija, članak, znanstveni)

doi

2112.

Mikulandrić, Robert; Lončar, Dražen; Böhning, Dorith; Böhme, Rene; Beckmann, Michael

Process performance improvement in a co- current, fixed bed biomass gasification facility by control system modifications // Energy conversion and management, 104 (2015), 135-146 doi:10.1016/j.enconman.2015.05.048 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com dx.doi.org

2113.

Žakula, Tea; Armstrong, Peter; Norford Leslie

Advanced cooling technology with thermally activated building surfaces and model predictive control // Energy and buildings, 86 (2015), 640-650 doi:10.1016/j.enbuild.2014.10.054 (međunarodna recenzija, članak, znanstveni)

doi dx.doi.org www.sciencedirect.com

2114.

Perevertaylenko, Oleksandr; Tovazhnyanskyy, Leonid; Boldyryev, Stanislav; Krajačić, Goran; Kapustenko, Petro; Arsenyeva, Olga; Arsenyev, Pavel

СРАВНЕНИЕ КАНАЛОВ КОМПАКТНЫХ ТЕПЛООБМЕННЫХ АППАРАТОВ ДЛЯ УТИЛИЗАЦИИ НИЗКОПОТЕНЦИАЛЬНОГО ТЕПЛА ПРОМЫШЛЕННЫХ ПРЕДПРИЯТИЙ // Ìntegrovanì tehnologìï ta energozberežennâ, 4 (2015), 27-34 (podatak o recenziji nije dostupan, članak, znanstveni)

Pristup cjelovitom tekstu rada

2115.

Mateša, Branko; Kožuh, Zoran; Dunđer, Marko; Samardžić, Ivan

Determination of clad plates residual stresses by x-ray diffraction method // Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 22 (2015), 6; 1533-1538 doi:10.17559/TV-20150115105238 (međunarodna recenzija, članak, znanstveni)

doi

2116.

Jelaska, Damir

Fatigue Behaviour of Ti−6al−4v Alloy Subjected to Combined HCF/LCF Loading // Advanced engineering, 9 (2015), 25-36 (podatak o recenziji nije dostupan, članak, znanstveni)

2117.

Župan, Josip; Majić Renjo, Marijana

Thermal and Rheological Properties of Water- based Ferrofluids and Their Applicability as Quenching Media // Physics procedia, 75 (2015), 1458-1467 doi:10.1016/j.phpro.2015.12.166 (podatak o recenziji nije dostupan, članak, znanstveni)

doi www.journals.elsevier.com www.sciencedirect.com

2118.

Kovačić, Saša; Cajner, Franjo; Landek, Darko

Wear resistance of TiN/TiCN and TiN/TiBN multilayer coatings applied on hot work tool steel // Key Engineering Materials, 674 (2015), 257-262 (međunarodna recenzija, članak, znanstveni)

2119.

Hloch, Sergej; Foldyna, Josef; Pude, Frank; Kľoc, Ján; Zeleňák, Michal; Hvizdoš, Pavol; Monka, Peter; Smolko, Igor; Ščučka, Jiří; Kozak, Dražan et al.

Experimental in-vitro bone cements disintegration with ultrasonic pulsating water jet for revision arthroplasty // Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 22 (2015), 6; 1609-1615 doi:10.17559/TV-20150822145550 (međunarodna recenzija, članak, znanstveni)

doi

2120.

Čelović, Sevket; Tipsarević, Miloš; Maneski, Taško; Vuherer, Tomaž; Kozak, Dražan

Numerical-Experimental Analysis of the Foldable Containers Strength // Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 22 (2015), 6; 1527-1532 doi:10.17559/TV-20150112100813 (međunarodna recenzija, članak, znanstveni)

doi dx.doi.org

2121.

Glavan, Ivica; Prelec, Zmagoslav; Pavković, Branimir

Modelling, Simulation and Optimization of smalscalle CCHP energy systems // International journal of simulation modelling, 14 (2015), 4; 683-696 doi:10.2507/IJSIMM14(4)10.336 (međunarodna recenzija, članak, znanstveni)

doi www.ijsimm.com

2122.

Novaković, Branko

Is Positive Gravitational Force Source of Dark Energy? // International journal of new technology and research, Volume-1 (2015), Issue-7; 6-13 (podatak o recenziji nije dostupan, članak, znanstveni)

Pristup cjelovitom tekstu rada www.ijntr.org www.ijntr.org

2123.

Runje, Biserka; Krstić Vukelja, Elizabeta; Stepanić, Josip

Agent-Based Simulation of Measuring the Quality of Services // Tehnički vjesnik – Technical Gazette: Scientific professional Journal of technical faculties of the Josip Juraj Strossmayer University of Osijek., Vol. 22 (2015), No. 6; 1561-1566 doi:10.17559/TV-20150416093602 (međunarodna recenzija, članak, znanstveni)

doi

2124.

Alfirević, Ivo; Žeželj, Dragan; Skozrit, Ivica

Smooth Yield Surfaces of Isotropic Materials // Transactions of FAMENA, 39 (2015), 3; 1-8 (međunarodna recenzija, članak, znanstveni)

2125.

Škugor, Branimir; Deur, Joško

Dynamic Programming-based Optimisation of Charging an Electric Vehicle Fleet System Represented by an Aggregate Battery Model // Energy (Oxford), 92 (2015), Part 3; 456-465 doi:10.1016/j.energy.2015.03.057 (međunarodna recenzija, članak, znanstveni)

doi dx.doi.org www.sciencedirect.com

2126.

Škugor, Branimir; Deur, Joško

A novel model of electric vehicle fleet aggregate battery for energy planning studies // Energy (Oxford), 92 (2015), Part 3; 444-455 doi:10.1016/j.energy.2015.05.030 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com dx.doi.org

2127.

Grgec Bermanec, Lovorka; Zvizdic, Davor

Interlaboratory comparison in the pressure range from 0 to 2 MPa for accredited calibration laboratories // International journal of metrology and quality engineering, 6 (2015), 3; 307-p1 doi:10.1051/ijmqe/2015021 (međunarodna recenzija, članak, znanstveni)

doi

2128.

Motalleb, Miri; Đukić, Ankica; Firak, Mihajlo

Solar hydrogen power system for isolated passive house // International journal of hydrogen energy, 40 (2015), 46; 16001-16009 doi:10.1016/j.ijhydene.2015.09.134 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com authors.elsevier.com

2129.

Lesičar, Tomislav; Tonković, Zdenko; Sorić, Jurica

Second-Order Computational Homogenization Scheme Preserving Microlevel C1 Continuity // Key engineering materials, 627 (2015), 381-384 doi:10.4028/www.scientific.net/KEM.627.381 (međunarodna recenzija, članak, znanstveni)

doi www.scientific.net

2130.

Šoda, Joško; Vujović, Igor; Kulenović, Zlatan

Analysis of the Vibration Signal Using Time- Frequency Methods // Transactions of FAMENA, 39 (2015), 3; 23-34 (međunarodna recenzija, članak, znanstveni)

2131.

Šare, Anamarija; Krajačić, Goran; Pukšec, Tomislav; Duić, Neven

The integration of renewable energy sources and electric vehicles into the power system of the Dubrovnik region // Energy, sustainability and society, 5 (2015), 1; 1-16 doi:10.1186/s13705-015-0055-7 (međunarodna recenzija, kratko priopcenje, znanstveni)

doi doi.org energsustainsoc.biomedcentral.com

2132.

Ostojic, Gordana; Jovanovic, Vukica; Kozak, Drazan; Ivandic, Zeljko; Stankovski, Stevan

Mechatronic education at the Faculty of Technical Sciences Novi Sad // Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 22 (2015), 3; 805-812 doi:10.17559/TV-20140225111636 (međunarodna recenzija, pregledni rad, znanstveni)

doi

2133.

Cho, Dae Seung; Vladimir, Nikola; Choi, Tae Muk

Natural vibration analysis of stiffened panels with arbitrary edge constraints using the assumed mode method // Proceedings of the Institution of Mechanical Engineers Part M-Journal of Engineering for the Maritime Environment, 229 (2015), 4; 340-349 doi:10.1177/1475090214521179 (međunarodna recenzija, članak, znanstveni)

doi journals.sagepub.com

2134.

Ljubas, Davor; Ćurković, Lidija; Marinović, Veronika; Bačić, Ivana; Tavčar, Branka

Photocatalytic degradation of azo-dyes by sol- gel TiO2 films: effects of polyethylene glycol addition, reaction temperatures and irradiation wavelengths // Reaction Kinetics Mechanisms and Catalysis, 116 (2015), 2; 563-576 doi:10.1007/s11144-015-0917-1 (međunarodna recenzija, članak, znanstveni)

doi link.springer.com

2135.

Mikulčić, Hrvoje; Wang, Xuebin; Vujanović, Milan; Tan, Houzhang; Duić, Neven

Mitigation of Climate Change by Reducing Carbon Dioxide Emissions in Cement Industry // Chemical Engineering transactions, 45 (2015), 649-654 doi:10.3303/CET1545109 (podatak o recenziji nije dostupan, članak, znanstveni)

doi www.aidic.it

2136.

Boldyryev, Stanislav; Krajačić, Goran; Duić, Neven; Varbanov, Petar, Sabev

Cost Minimisation for Total Site Heat Recovery // Chemical Engineering transactions, 45 (2015), 157-162 doi:10.3303/CET1545027 (podatak o recenziji nije dostupan, članak, znanstveni)

doi www.aidic.it

2137.

Nagy, Andre; Mizsey, Péter; Hancsók, Jenő; Boldyryev, Stanislav; Varbanov, Petar

Analysis of energy saving by combination of distillation and pervaporation for biofuel production // Chemical engineering and processing, 98 (2015), 86-94 doi:10.1016/j.cep.2015.10.010 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

2138.

Boldyryev, Stanislav; Varbanov, Petar Sabev

Low potential heat utilization of bromine plant via integration on process and Total Site levels // Energy (Oxford), 90 (2015), 1; 47-55 doi:10.1016/j.energy.2015.05.071 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

2139.

Lela, Branimir; Rogante, Massimo; Živković, Dražen; Šapina, Ivona

EFFETI SUGLI ACCIAI A BASSO CONTENUTO DI CARBONIO E LORO CARATTERIZZAZIONE // Trattamenti & Finiture, 5 (2015), 26-34 (podatak o recenziji nije dostupan, prethodno priopćenje, znanstveni)

2140.

Ćorić, Danko; Begović, Toni; Aleksandrov- Fabijanić, Tamara

Karakterizacija morfologije metalnih pjena // Tehnički glasnik, 9 (2015), 3; 285-290 (podatak o recenziji nije dostupan, članak, znanstveni)

2141.

Pešić, Igor; Lanc, Domagoj; Turkalj, Goran

Non-linear thermal buckling analysis of thin- walled beam structures // Engineering review : znanstveni časopis za nove tehnologije u strojarstvu, brodogradnji i elektrotehnici, 35 (2015), 3; 239-245 (međunarodna recenzija, članak, znanstveni)

er.riteh.hr

2142.

Metelski, Andrej; Krile; Srećko; Maruda, Radoslaw; Legutko, Stanislaw; Krolczyk, Grzegorz

Taguchi design of experiment versus dynamic programming approach in the optimization of turning process // Applied Mechanics and Materials, 808 (2015), 66-71 doi:10.4028/www.scientific.net/AMM.808.66 (podatak o recenziji nije dostupan, članak, znanstveni)

doi

2143.

Deur, Joško; Škugor, Branimir; Cipek, Mihael

Integration of Electric Vehicles into Energy and Transport Systems // Automatika : časopis za automatiku, mjerenje, elektroniku, računarstvo i komunikacije, 56 (2015), 4; 395-410 doi:10.7305/automatika.2016.01.1106 (međunarodna recenzija, članak, znanstveni)

doi automatika.korema.hr automatika.korema.hr

2144.

Bonefačić, Igor; Blecich Paolo

Two-color temperature measurement method using BPW34 PIN photodiodes // Engineering review : znanstveni časopis za nove tehnologije u strojarstvu, brodogradnji i elektrotehnici, 35 (2015), 3; 259-266 (međunarodna recenzija, članak, znanstveni)

er.riteh.hr

2145.

Novaković, Branko

Relativistic Alpha Field Theory – Part III: Does Gravitational Force Becomes Positive if (GM/rc2) > 1? // International journal of new technology and research, 1 (2015), 5; 39-47 (podatak o recenziji nije dostupan, članak, znanstveni)

Pristup cjelovitom tekstu rada

2146.

Novaković, Branko

Relativistic Alpha Field Theory – Part II: Does a Gravitational Field Could be Without Singularity? // International journal of new technology and research, 1 (2015), 5; 31-38 (podatak o recenziji nije dostupan, članak, znanstveni)

Pristup cjelovitom tekstu rada

2147.

Novaković, Branko

Relativistic Alpha Field Theory – Part I: Determination of Field Parameters // International journal of new technology and research, 1 (2015), 5; 23-30 (podatak o recenziji nije dostupan, članak, znanstveni)

Pristup cjelovitom tekstu rada

Pregled po znanstvenom području: Strojarstvo (MB: 2.11)

Radovi u časopisima

Znanstveni i pregledni radovi