Pregled po znanstvenom području: Strojarstvo (MB: 2.11)

1548.

Horvat, Zvonko; Marušić, Vlatko; Samardžić, Ivan; Opačak, Ivan

Influence of ploughshare surface layers on ploughing efficiency // Metalurgija, 57 (2018), 1-2; 125-127 (podatak o recenziji nije dostupan, članak, znanstveni)

1549.

Lesičar, Tomislav; Sorić Jurica; Tonković Zdenko

On the Scale-Transition in Multiscale Modeling of Ductile Damage // Key engineering materials, 754 (2018), 226-230 doi::10.4028/www.scientific.net/KEM.754.381 (međunarodna recenzija, članak, znanstveni)

doi

1550.

Marinić-Kragić, Ivo; Nižetić, Sandro; Grubišić- Čabo, Filip; Papadopoulos, Agis

Analysis of flow separation effect in the case of the free-standing photovoltaic panel exposed to various operating conditions // Journal of cleaner production, 174 (2018), 10; 53-64 doi:10.1016/j.jclepro.2017.10.310 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

1551.

Duspara, Miroslav; Starčević, Valnea; Samardžić, Ivan

Analiza zona nastalih rezanjem hidro abrazivnim mlazom nehrđajućeg čelika AISI 316L // Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 25 (2018), 2; 616-621 doi:10.17559/TV-20170216095042 (međunarodna recenzija, prethodno priopćenje, znanstveni)

doi hrcak.srce.hr

1552.

Senjanović, Ivo; Ćatipović, Ivan; Alujević, Neven; Vladimir, Nikola; Čakmak, Damjan

A finite strip for the vibration analysis of rotating cylindrical shells // Thin-walled structures, 122 (2018), 158-172 doi:10.1016/j.tws.2017.10.017 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada doi www.fsb.unizg.hr www.fsb.unizg.hr www.sciencedirect.com

1553.

Medica-Viola, Vedran; Pavković, Branimir; Mrzljak, Vedran

Numerical model for on-condition monitoring of condenser in coal-fired power plants // International journal of heat and mass transfer, 117 (2018), 912-923 doi:10.1016/j.ijheatmasstransfer.2017.10.047 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

1554.

Hokamoto, Kazuyuki; Shimomiyab, Koshiro; Nishi, Masatosi; Krstulović-Opara, Lovre; Vesenjak, Matej; Ren, Zoran

Fabrication of unidirectional porous-structured aluminum through explosive compaction using cylindrical geometry // Journal of materials processing technology, 251 (2018), 262-266 doi:10.1016/j.jmatprotec.2017.07.022 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

1555.

Kotarski, Denis; Piljek, Petar; Brezak, Hrvoje; Kasać, Josip

Chattering free tracking control of a fully actuated multirotor with passively tilted rotors // Transactions of FAMENA, 42 (2018), 1; 1-14 doi:10.21278/TOF.42101 (međunarodna recenzija, članak, znanstveni)

doi hrcak.srce.hr

1556.

Ćurković, Milan; Marinić-Kragić, Ivo; Vučina, Damir

A novel projection of open geometry into rectangular domain for 3D shape parameterization // Integrated computer-aided engineering, 25 (2018), 1; 1-14 doi:10.3233/ICA-170553 (međunarodna recenzija, članak, znanstveni)

doi content.iospress.com

1557.

Marinić-Kragić, Ivo; Ćurković, Milan; Vučina, Damir

Adaptive re-parameterization based on arbitrary scalar fields for shape optimization and surface fitting // Engineering applications of artificial intelligence, 67 (2018), 39-51 doi:10.1016/j.engappai.2017.09.004 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com doi.org

1558.

Marušić, Ante; Kozmar, Hrvoje; Pospíšil, Stanislav; Kuznetsov, Sergey

Wake Characteristics of Ice-Accreted Cylindrical Bars in a Cross-Flow at Subcritical Reynolds Numbers // Journal of aerospace engineering, 31 (2018), 2; 06017007, 7 doi:10.1061/(ASCE)AS.1943-5525.0000816 (međunarodna recenzija, kratko priopcenje, znanstveni)

doi ascelibrary.org

1559.

Marinić-Kragić, Ivo; Vučina, Damir; Milas, Zoran

Numerical workflow for 3D shape optimization and synthesis of vertical-axis wind turbines for specified operating regimes // Renewable energy, 115 (2018), 113-127 doi:10.1016/j.renene.2017.08.030 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com doi.org

1560.

Zdraveva, Emilija; Mijović, Budimir; Govorčin Bajsić, Emi; Grozdanić, Vedrana

The efficacy of electrospun polyurethane fibers with TiO2 in a real time weathering condition // Textile research journal, 88 (2018), 21; 2445-2453 doi:10.1177/0040517517723025 (međunarodna recenzija, članak, znanstveni)

doi journals.sagepub.com

1561.

Hoić, Matija; Kranjčević, Nenad; Herold, Zvonko; Deur, Joško; Ivanović, Vladimir

Modeling of dry dual-clutch axial dynamics // Proceedings of the institution of mechanical engineers part d-journal of automobile engineering, 232 (2018), 2; 220-237 doi:10.1177/0954407017694964 (međunarodna recenzija, članak, znanstveni)

doi journals.sagepub.com

1562.

Jurkovic, Zoran; Cukor, Goran; Brezocnik, Miran; Brajkovic, Tomislav

A comparison of machine learning methods for cutting parameters prediction in high speed turning process // Journal of Intelligent Manufacturing, 29 (2018), 8; 1683-1693 doi:10.1007/s10845-016-1206-1 (međunarodna recenzija, članak, znanstveni)

doi link.springer.com

1563.

Peko, Ivan; Gjeldum, Nikola; Bilić, Boženko

Application of AHP, Fuzzy AHP and PROMETHEE method in solving additive manufacturing process selection problem // Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 25 (2018), 2; 453-461 doi:10.17559/TV-20170124092906 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada doi hrcak.srce.hr

1564.

Munjas, Neven; Čanađija, Marko; Brnić, Josip

Thermo-Mechanical Multiscale Modeling in Plasticity of Metals Using Small Strain Theory // Journal of mechanics, 34 (2018), 5; 579-589 doi:10.1017/jmech.2017.37 (međunarodna recenzija, članak, znanstveni)

doi www.cambridge.org

1565.

Kasać, Josip; Žilić, Tihomir; Milić, Vladimir; Jokić, Andrej

Frequency-shifting-based stable on-line algebraic parameter identification of linear systems // Journal of the Franklin Institute, 355 (2018), 18; 9224-9244 doi:10.1016/j.jfranklin.2017.03.008 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada doi www.sciencedirect.com doi.org

1566.

Pavković, Neven; Martinec, Tomislav; Marjanović, Dorian

Consolidation of Methods for Visualization and Management of Engineering Design Data Sets // Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 25 (2018), 1; 26-39 doi:10.17559/TV-20160707093053 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada doi hrcak.srce.hr

1567.

Peko, Ivan; Nedić, Bogdan; Đorđević, Aleksandar; Veža, Ivica

Modelling of kerf width in plasma jet metal cutting process using ANN approach // Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 25 (2018), 2; 401-406 doi:10.17559/TV-20161024093323 (međunarodna recenzija, članak, znanstveni)

doi hrcak.srce.hr

1568.

Nikolić, Mijo; Karavelić, Emir; Ibrahimbegovic, Adnan; Miščević, Predrag

Lattice Element Models and Their Peculiarities // Archives of computational methods in engineering, 25 (2018), 3; 753-784 doi:10.1007/s11831-017-9210-y (međunarodna recenzija, članak, znanstveni)

doi link.springer.com

1569.

Nižetić, Sandro

Design scenarios for renovation of sports complex: A case study // International journal of sustainable energy, 37 (2018), 2; 105-114 doi:10.1080/14786451.2016.1178643 (međunarodna recenzija, članak, znanstveni)

doi

1570.

Jankovich, Dennis; Osman, Krešimir; Milković, Vili

A New Methodology for Temperature Testing of Thermostatic Chambers used in Food Industry // Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 25 (2018), Supplement 2; 319-325 doi:10.17559/TV-20161117070318 (međunarodna recenzija, članak, znanstveni)

doi hrcak.srce.hr

1571.

Bušić, Matija; Kožuh, Zoran; Klobčar, Damjan

Influence of the tool travel speed on friction stir processing of aluminium alloy AlCu4Mg1 // Analele Universităţii, 28 (2017), 11-14 (međunarodna recenzija, članak, znanstveni)

www.gup.ugal.ro

1572.

Žiga, Alma; Kačmarčik, Josip

STRESS STATE IN ROTARY KILN SUPPORT ROLLERS // Mašinstvo, 1 (2017), 14; 3-10 (recenziran, članak, znanstveni)

Pristup cjelovitom tekstu rada mf.unze.ba

1573.

Moro, Luciano; Boscariol, Paolo; De Bona, Francesco; Gasparetto, Alessandro; Srnec Novak, Jelena

Innovative design of fire doors: computational modeling and experimental validation // Fire technology, 53 (2017), 5; 1833-1846 doi:10.1007/s10694-017-0658-y (međunarodna recenzija, članak, znanstveni)

doi link.springer.com

1574.

Wan, Yuping; Zhang, Pingping; Huang, Zhenyu; Ji, Lin; Jokić, Marko

Parameter Uncertainty Effects of Stiffeners on the Vibration of Plates // Transactions of FAMENA, 41 (2017), 3; 1-12 doi:10.21278/tof.41301 (međunarodna recenzija, članak, znanstveni)

doi

1575.

Zhang, Pingping; Wu, Huaiyu; Ji, Lin; Jokić, Marko

A Study on the Effects of Local Added Masses on the Natural and the Sound Radiation Characteristics of Thin Plate Structures // Transactions of FAMENA, 40 (2017), 4; 25-39 doi:10.21278/tof.40403 (međunarodna recenzija, članak, znanstveni)

doi

1576.

Vidaković, Josip; Jerbić, Bojan; Švaco, Marko; Šuligoj, F ilip; Šekoranja, Bojan

Position planning for collaborating robots and its application in neurosurgery // Tehnicki vjesnik - Technical Gazette, 24 (2017), 6; 190166, 7 doi:10.17559/tv-20170213110534 (podatak o recenziji nije dostupan, članak, znanstveni)

doi hrcak.srce.hr hrcak.srce.hr

1577.

Blum, David H.; Zakula, Tea; Norford, Leslie K.

Opportunity Cost Quantification for Ancillary Services Provided by Heating, Ventilating, and Air-Conditioning Systems // IEEE Transactions on Smart Grid, 8 (2017), 3; 1264-1273 doi:10.1109/tsg.2016.2582207 (međunarodna recenzija, članak, znanstveni)

doi

1578.

Matulić, Nikola; Račić, Nikola; Radica, Gojmir

Supercharged engine using turbine standalone exhaust gas recuperation system // Brodogradnja, 68 (2017), 3; 103-118 doi:10.21278/brod68307 (međunarodna recenzija, članak, znanstveni)

doi

1579.

Greguric, Ivana

Interview: Richard Walker, Human Brain Project // Journal of Evolution and Technology, 27 (2017), 2; 4-11 (međunarodna recenzija, članak, znanstveni)

jetpress.org

1580.

Peržel, Vincent; Flimel, Marián; Krolczyk, Jolanta; Sedmek, Aleksandar; Ruggiero, Alessandro; Kozak, Dražan; Stoić, Antun; Krolczyk; Grzegorz; Hloch, Sergej

MEASUREMENT OF THERMAL EMISSION DURING CUTTING OF MATERIALS USING ABRASIVE WATER JET // Thermal science, 21 (2017), 5; 2197-2203 doi:10.2298/TSCI150212046P (međunarodna recenzija, članak, znanstveni)

doi www.researchgate.net

1581.

Boullosa-Falces, David; Sanchez–Varela, Zaloa; Larrabe-Barrena, Juan Luis; Lopez-Arraiza, Alberto; Gomez-Solaetxe, Miguel Angel

Multivariate Statistical Control Applied in a Marine Propulsion Engine // Journal of maritime research, 14 (2017), 2; 41-46 (recenziran, članak, znanstveni)

www.jmr.unican.es

1582.

Abramović, Luka; Martinović, Dragan; Lenac, Davor

Analysis of Variable Inlet Valve Control in Two-stage Turbocharhed Marine Four-stroke Diesel Engines - Miller Cycle // Pomorstvo : scientific journal of maritime research, 31 (2017), 1; 67-73 doi:10.31217/p.31.1.9 (recenziran, pregledni rad, znanstveni)

Pristup cjelovitom tekstu rada doi hrcak.srce.hr

1583.

Gajšek, Brigita; Vujica Herzog, Nataša; Butlewski, Marcin; Đukić, Goran

Research opportunity : incorporation of human factors in order picking system models // Zeszyty Naukowe Politechniki Poznańskiej. Organizacja i Zarządzanie, 72 (2017), 46-61 doi:10.21008/j.0239-9415.2017.072.04 (međunarodna recenzija, članak, znanstveni)

doi bazekon.icm.edu.pl www.repozytorium.put.poznan.pl

1584.

Smokvina Hanza, Sunčana; Dabo, Dario

Characterization of cast iron using ultrasonic testing // HDKBR INFO Magazin, 7 (2017), 1; 3-7 (međunarodna recenzija, pregledni rad, znanstveni)

1585.

Dlaka, Domagoj; Švaco, Marko; Chudy, Darko; Jerbić, Bojan; Šekoranja, Bojan; Šuligoj, Filip; Vidaković, Josip; Almahariq, Fadi; Romić, Dominik

Brain biopsy performed with the RONNA G3 system: a case study on using a novel robotic navigation device for stereotactic neurosurgery // International journal of medical robotics and computer assisted surgery, 14 (2017), 1; 10.1002/rcs.1884, 7 doi:10.1002/rcs.1884 (međunarodna recenzija, članak, znanstveni)

doi onlinelibrary.wiley.com

1586.

Mlikota, Marijo; Schmauder, Siegfried; Božić, Željko; Hummel, Martin

Modelling of overload effects on fatigue crack initiation in case of carbon steel // Fatigue & Fracture of Engineering Materials & Structures, 40 (2017), 8; 1182-1190 doi:10.1111/ffe.12598 (međunarodna recenzija, članak, znanstveni)

doi onlinelibrary.wiley.com

1587.

Gubeljak; Nenad; Cvetić; Miljenko; Božić, Željko; Predan, Jožef

Application of structural integrity assessment procedure on an axle pin of a wind turbine // Fatigue & Fracture of Engineering Materials & Structures, 40 (2017), 8; 1284-1294 doi:10.1111/ffe.12654 (međunarodna recenzija, članak, znanstveni)

doi onlinelibrary.wiley.com

1588.

Opetuk, Tihomir; Kolar, Davor; Cajner, Hrvoje; Đukić, Goran

Difference and similarity in perception between Green Supply Chain Management in food industry and Green Supply Chain Management in generally in Croatian companies // Zeszyty Naukowe: Organizacja i Zarządzanie, 1 (2017), 70; 49-64 (međunarodna recenzija, članak, znanstveni)

zeszyty.woiz.pl

1589.

Klobas, Vanja; Bognolo, Dario; Kršulja, Marko

Protupožarna zaštita kod LNG terminala // Vatrogastvo i upravljanje požarima, 7 (2017), 2; 29-42 (domaća recenzija, članak, znanstveni)

hrcak.srce.hr hrcak.srce.hr

1590.

Toumi, Noureddine; Maneski, Tasko; Aburuga, Tarek; Nestorovic, Biserka; Kozak, Drazan; Beno, Pavel

Numerical analysis of local and global buckling of a stiffened beam-column // Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 24 (2017), 4; 1221-1226 doi:10.17559/TV-20160118081434 (međunarodna recenzija, članak, znanstveni)

doi hrcak.srce.hr

1591.

Smojver, Ivica; Ivančević, Darko

Application of Numerical Methods in the Improvement of Safety of Aeronautical Structures // Transportation research procedia, 28 (2017), 164-172 doi:10.1016/j.trpro.2017.12.182 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

1592.

Čorić, Mirko; Deur, Joško; Xu, Li; Tseng, H. Eric; Hrovat, Davor

Optimisation of active suspension control inputs for improved performance of active safety systems // Vehicle System Dynamics, 56 (2017), 1; 1-26 doi:10.1080/00423114.2017.1340652 (međunarodna recenzija, članak, znanstveni)

doi

1593.

Kvaternik, Sandra; Turkalj, Goran; Lanc, Domagoj

Analysis of flexure, torsion and buckling of thin-walled frames with a focus on the joint warping behaviour // Transactions of FAMENA, 41 (2017), 4; 1-10 doi:10.21278/TOF.41401 (međunarodna recenzija, članak, znanstveni)

doi hrcak.srce.hr

1594.

Petrović, Ivan; Samardžić, Ivan; Stojkov, Marinko

Utvrđivanje kvalitete vagonskih osovina pomoću NDT metoda // HDKBR INFO Magazin, 7 (2017), 1; 8-12 (domaća recenzija, članak, znanstveni)

hrcak.srce.hr hrcak.srce.hr

1595.

Stazić, Ladislav; Komar, Ivan; Račić, Nikola

Evaluation Methodology for Ship’s Planned Maintenance System Database // Transactions on maritime science, 6 (2017), 2; 109-116 doi:10.7225/toms.v06.n02.002 (međunarodna recenzija, prethodno priopćenje, znanstveni)

doi doi.org www.toms.com.hr hrcak.srce.hr hrcak.srce.hr

1596.

Bošnjaković, Mladen; Čikić, Ante; Muhič, Simon; Stojkov, Marinko

Development of a new type of finned heat exchanger // Tehnički vjesnik, 24 (2017), 6; 1785-1796 doi:10.17559/TV-20171011071711 (međunarodna recenzija, članak, znanstveni)

doi doi.org hrcak.srce.hr

1597.

Koboević, Žarko; Kurtela, Željko; Mišković, Darijo

Terminali za ukapljeni prirodni plin // Suvremeni promet, 37 (2017), 5/6; 201-206 (recenziran, pregledni rad, znanstveni)

Pristup cjelovitom tekstu rada

1598.

Vizentin, Goran; Vukelić, Goran; Srok, Mateo

Common failures of ship propulsion shafts // Pomorstvo : scientific journal of maritime research, 31 (2017), 2; 85-90 doi:10.31217/p.31.2.1 (recenziran, pregledni rad, znanstveni)

doi hrcak.srce.hr

1599.

Tarandek, Tatjana; Leutar, Zdravka

Neki aspekti neovisnog življenja osoba s invaliditetom // Revija za socijalnu politiku, 24 (2017), 3; 301-319 doi:10.3935/rsp.v24i3.1393 (recenziran, članak, znanstveni)

doi hrcak.srce.hr

1600.

Barretta, Raffaele; Brčić, Marino; Čanađija, Marko; Luciano, Raimondo; Marotti de Sciarra, Francesco

Application of gradient elasticity to armchair carbon nanotubes: Size effects and constitutive parameters assessment // European Journal of Mechanics - A/Solids, 65 (2017), 1-13 doi:10.1016/j.euromechsol.2017.03.002 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

1601.

Šolić, Sanja; Schauperl, Zdravko; Godec, Matjaž; Tropša, Vlado

MICROSTRUCTURAL CHANGES IN HEAT TREATMENT OF PM HIGH-SPEED STEELS // Tehnički glasnik - Technical journal, 11 (2017), 4; 166-170 doi:TG-20171127181040 (međunarodna recenzija, članak, znanstveni)

doi

1602.

Swei, Mohamed; Sedmak, Aleksandar; Petrovski, Blagoje; Golubović, Zoran; Sedmak, Simon; Katinić, Marko; Azzabi, Khaled

CREEP CRACK GROWTH BEHAVIOR OF P91 STEEL WELDMENTS // Thermal science, 21 (2017), Suppl. 2; 240-250 doi:10.2298/TSCI170729240S (međunarodna recenzija, članak, znanstveni)

doi www.doiserbia.nb.rs

1603.

Babić, Zoran Babić; Veža, Ivica; Banduka, Nikola

ASSESSMENT OF INDUSTRIAL MATURITY LEVEL BY MULTI-CRITERIAL ANALYSIS // International Journal ’’Advanced Quality’’, 45 (2017), 4; 13-16 doi:10.25137/IJAQ.n4.v45.y2017.p13-16 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada doi journal.jusk.rs

1604.

Kralj, Predrag; Martinović, Dragan; Tudor, Mato

Analisys of thermodynamic and technological basics of the marine fresh water generator model // Desalination and Water Treatment, 95 (2017), 1; 180-185 doi:10.5004/dwt.2017.21552 (podatak o recenziji nije dostupan, članak, znanstveni)

Pristup cjelovitom tekstu rada doi doi.org www.deswater.com

1605.

Brnčić, Dino; Gregov, Goran

Numerical simulation study of parallel hydraulic hybrid system for a delivery van // Tehnički glasnik, 11 (2017), 1-2; 21-28 (podatak o recenziji nije dostupan, članak, znanstveni)

1606.

Dominković, D.F.; Bačeković, I.; Sveinbjörnsson, D.; Pedersen, A.S.; Krajačić, G.

On the way towards smart energy supply in cities: The impact of interconnecting geographically distributed district heating grids on the energy system // Energy, 137 (2017), 941-960 doi:10.1016/j.energy.2017.02.162 (međunarodna recenzija, članak, znanstveni)

doi

1607.

Novaković, Branko

RAF Theory Extends the Applications of GRT to the Extremely Strong Gravitational Fields // International Journal of New Technology and Research (IJNTR), 3 (2017), 11; 56-62 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada www.ijntr.org

1608.

Novaković, Branko

Are Singularity and Dark Energy Consequences of Vacuum Solution of Field Equation? // International Journal of New Technology and Research (IJNTR), 3 (2017), 11; 47-55 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada www.ijntr.org

1609.

Dubreta, Nikša; Miloš, Damir

Elements of Motivational Structure for Studying Mechanical Engineering // IAFOR Journal of Education, 5 (2017), 3; 89-106 doi:10.22492/ije.5.3.04 (međunarodna recenzija, članak, znanstveni)

doi iafor.org

1610.

Banić, Damjan; Bacciocchi, Michele; Tornabene, Francesco; Ferreira, Antonio

Influence of Winkler-Pasternak Foundation on the Vibrational Behavior of Plates and Shells Reinforced by Agglomerated Carbon Nanotubes // Applied Sciences-Basel, 7 (2017), 12; 1228, 55 doi:10.3390/app7121228 (međunarodna recenzija, članak, znanstveni)

doi www.mdpi.com

1611.

Shirvan , Alireza; Choquet , Isabelle; Nilsson , Hakan; Jasak, Hrvoje

Coupling boundary condition for high-intensity electric arc attached on a non-homogeneous refractory cathode // Computer Physics Communications, 222 (2017), 31-45 doi:10.1016/j.cpc.2017.09.010 (međunarodna recenzija, članak, znanstveni)

doi

1612.

Batas-Bjelić, Ilija; Rajaković, Nikola; Duić, Neven,

Smart municipal energy grid within electricity market // Energy (Oxford), 137 (2017), 1277-1285 doi:.org/10.1016/j.energy.2017.06.177 (podatak o recenziji nije dostupan, članak, znanstveni)

doi doi.org

1613.

Dominković, Dominik Franjo; Bin Abdul Rashid, K.A.; A.Romagnoli, Pedersen; Allan Schrøder, Leong, K.C.; Krajačić, Goran; Duić, Neven,

Potential of district cooling in hot and humid climates // Applied energy, 208 (2017), 49-61 doi:10.1016/j.apenergy.2017.09.052 (podatak o recenziji nije dostupan, članak, znanstveni)

doi doi.org

1614.

Nađ, Nada; Mihaljević, Morana; Keran, Zdenka; Horvatić-Novak, Amalija

THE ACCURACY OF ULTRASONIC THICKNESS MEASUREMENT OF DISTORTED GRAIN STRUCTURE METAL SAMPLES // International Journal of Advanced Quality, 45 (2017), 4; 33-37 doi:10.25137/IJAQ.n4.v45.y2017.p33-37 (podatak o recenziji nije dostupan, članak, znanstveni)

doi journal.jusk.rs

1615.

Perkušić, Milan; Jelaska, Damir; Podrug, Srđan; Tvrdić, Vjekoslav

On the Feasibility of Independently Controllable Transmissions // Energies, 10 (2017), 11; 1835, 13 doi:10.3390/en10111835 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada doi www.mdpi.com

1616.

Buljac, Andrija; Kozmar, Hrvoje; Pospíšil, Stanislav; Macháček, Michael

Flutter and galloping of cable-supported bridges with porous wind barriers // Journal of wind engineering and industrial aerodynamics, 171 (2017), 304-318 doi:10.1016/j.jweia.2017.10.012 (međunarodna recenzija, članak, znanstveni)

doi

1617.

Matijević, Božidar; Sushma, Thota Surya Krishna; Prathvi, B.K.

Effect of heat treatment parameters on the mechanical properties and microstructure of aluminium bronze // Tehnički glasnik - Technical Journal, 11 (2017), 3; 107-110 (međunarodna recenzija, članak, znanstveni)

1618.

Matijevic, Bozidar; Liscic, Bozidar; Totten, George E.; Canale, Lauralice de C. F.

Comparative Measurement and Evaluation of the Quenching Intensity of Palm Oil, Canola Oil and a Conventional Petroleum Oil Quenchant Based on Temperature Gradient Measurements // Materials Performance and Characterization, 6 (2017), 5; 757-776 doi:10.1520/MPC20170041 (međunarodna recenzija, članak, znanstveni)

doi

1619.

Čatić, Igor; Čaloska, Jasmina; Godec, Damir; Kovačić, Marijan; Pilipović, Ana; Skala, Karolj

Fluid-deposition of rocks is natural model for additive production // Interdisciplinary description of complex systems, 15 (2017), 3; 180-189 doi:10.7906/indecs.15.3.2 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada doi hrcak.srce.hr indecs.eu

1620.

Sorić, Jurica; Tonković, Zdenko; Lesičar, Tomislav

Multiscale numerical modeling of deformation responses of heterogeneous materials // Rad Hrvatske akademije znanosti i umjetnosti. Tehničke znanosti, 1 (2017), 1; 1-25 doi:.org/10.21857/9xn31cv46y (domaća recenzija, članak, znanstveni)

doi

1621.

Duspara, Miroslav; Starčević, Valnea; Samardžić, Ivan; Horvat, Marko

Optimization of abrasive waterjet machining process parameters // Tehnički glasnik, 11 (2017), 4; 143-149 (međunarodna recenzija, članak, znanstveni)

hrcak.srce.hr hrcak.srce.hr

1622.

Landek, Darko; Cajner, Franjo; Kovačić, Saša

Wear Resistance of the Multilayer TiN/Ti(B, N) Coating Deposited on Cold Work Tool Steels // Materials performance and characterization, 6 (2017), 5; 1-11 doi:10.1520/MPC20170015 (podatak o recenziji nije dostupan, članak, znanstveni)

doi www.astm.org

1623.

Kovačić, Saša; Cajner, Franjo; Landek, Darko

Influence of Steel Substrate on the Properties of PACVD Gradient Multilayer TiCN Coating // Materials performance and characterization, 6 (2017), 5; 1-11 doi:10.1520/MPC20170013 (podatak o recenziji nije dostupan, članak, znanstveni)

doi www.astm.org

1624.

Landek, Darko; Župan, Josip; Filetin, Tomislav

Application of Ultrasound Stirring for Quenching in a Liquid Medium // Materials performance and characterization, 6 (2017), 5; 1-16 doi:10.1520/MPC20170014 (podatak o recenziji nije dostupan, članak, znanstveni)

doi www.astm.org

1625.

Martinec, Tomislav; Škec, Stanko; Savšek, Tomaž; Perišić, Marija Majda

Work sampling for the production development: A case study of a supplier in European automotive industry // Advances in production engineering & management, 12 (2017), 4; 375-387 doi:10.14743/apem2017.4.265 (međunarodna recenzija, članak, znanstveni)

doi apem-journal.org

1626.

Bašić, Josip; Degiuli, Nastia; Ban, Dario

Assessment of d'Alembert's paradox in panel methods by tangency correction // Engineering analysis with boundary elements, 85 (2017), 136-141 doi:10.1016/j.enganabound.2017.10.002 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com doi.org

1627.

Vidaković, Josip; Jerbić, Bojan; Švaco, Marko; Šuligoj, Filip; Šekoranja Bojan

Position planning for collaborating robots and its application in neurosurgery // Znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 24 (2017), 6; 1705-1711 (podatak o recenziji nije dostupan, članak, znanstveni)

hrcak.srce.hr

1628.

Mikulić, Dinko; Marušić, Željko

Istraživanje i razvoj dizajna automobila // Polytechnic and Design, 5 (2017), 1; 1-11 doi:10.19279 (podatak o recenziji nije dostupan, članak, znanstveni)

doi polytechnicanddesign.tvz.hr

1629.

Sattar, Ahmed M.A.; Jasak, Hrvoje; Škurić, Vanja

Three dimensional modeling of free surface flow and sediment transport with bed deformation using automatic mesh motion // Environmental modelling & software, 97 (2017), 303-317 doi:10.1016/j.envsoft.2017.08.005 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com doi.org

1630.

Shirvan, Alireza Javidi; Choquet, Isabelle; Nilsson, Hakan; Jasak, Hrvoje

Coupling boundary condition for high-intensity electric arc attached on a non-homogeneous refractory cathode // Computer physics communications, 222 (2017), 31-45 doi:10.1016/j.cpc.2017.09.010 (međunarodna recenzija, članak, znanstveni)

doi doi.org www.sciencedirect.com

1631.

Vukašinović, Nikola; Pavković, Neven

Use of Virtual Mobility to Facilitate Modern Project-Based NPD Education // International journal of engineering education, 33 (2017), 6(SIB); 2008-2019 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada www.ijee.ie

1632.

Švaco, Marko; Šekoranja, Bojan; Šuligoj, Filip; Vidaković, Josip; Jerbić, Bojan; Chudy, Darko

A novel robotic neuronavigation system: RONNA G3 // Strojniški vestnik, 63 (2017), 12; 725-735 doi:10.5545/sv-jme.2017.4649 (međunarodna recenzija, članak, znanstveni)

doi www.sv-jme.eu

1633.

Mikulčić, Hrvoje; von Berg, Eberhard; Wang, Xuebin; Vujanović, Milan; Tan, Houzhang; Duić, Neven

Using an Advanced Numerical Technique for Improving Pulverized Coal Combustion inside an Industrial Furnace // Chemical engineering transactions, 61 (2017), 235-240 doi:10.3303/CET1761037 (međunarodna recenzija, članak, znanstveni)

doi

1634.

Boldyryev, Stanislav; Mikulcic, Hrvoje; Ulyev, Leonid; Duic, Neven

Time Super Targeting: Planning of Optimal HEN Design Accounting Energy Prices // CHEMICAL ENGINEERING TRANSACTIONS, 61 (2017), 1903-1908 doi:10.3303/CET1761315 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada doi www.aidic.it www.aidic.it

1635.

Pavković, Danijel; Cipek, Mihael; Šprljan, Pavle; Jurišić, Goran

Some Recent Results of Automated Drilling and Torsional Vibration Active Damping R&D Aimed at Mature Drilling Systems Retrofitting // Naftaplin : znanstveno-stručno glasilo Hrvatske udruge naftnih inženjera i geologa, 37 (2017), 151; 110-119 (međunarodna recenzija, članak, znanstveni)

hunig.hr

1636.

Banić, Damjan; Lanc, Domagoj; Kvaternik, Sandra

Creep analysis of elastic beams under constant torque // Мachines. Technologies. Materials, XI (2017), 5/2017; 229-232 (podatak o recenziji nije dostupan, članak, znanstveni)

stumejournals.com

1637.

Kvaternik, Sandra; Turkalj, Goran; Banić, Damjan

Finite element analysis of torsional-flexural behaviour of thin-walled frame considering joint warping conditions // Trans&Motauto World, II (2017), 5/2017; 181-183 (podatak o recenziji nije dostupan, članak, znanstveni)

stumejournals.com

1638.

Calise, Francesco; D’Accadia, Massimo Dentice; Barletta, Carlo; Battaglia, Vittoria; Pfeifer, Antun; Duić, Neven.

Detailed Modelling of the Deep Decarbonisation Scenarios with Demand Response Technologies in the Heating and Cooling Sector: A Case Study for Italy // Energies, 10(10) (2017), 1535-1535 doi:10.3390/en10101535 (međunarodna recenzija, članak, znanstveni)

doi www.mdpi.com

1639.

Milosevic, Mijodrag; Lukic, Dejan; Borojevic, Stevo; Simunovic, Goran; Antic, Aco

A model of collaborative process planning system (e-CAPP) // Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 24 (2017), 1; 97-103 doi:10.17559/TV-20160222122629 (međunarodna recenzija, članak, znanstveni)

doi

1640.

Stefanic, Ivan; Simunovic, Goran; Stefanic, Edita; Campbell, Ronald K.

Entrepreneurial education for students of non-economics educational programs // Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 24 (2017), 4; 1079-1086 doi:10.17559/TV-20161128153529 (međunarodna recenzija, članak, znanstveni)

doi

1641.

Vukelić, Djordje; Tadić, Branko; Džunić, Dragan; Kocović, Vladimir; Brzaković, Ljiljana; Živković, Milutin; Šimunović, Goran

Analysis of ball-burnishing impact on barrier properties of wood workpieces // International journal of advanced manufacturing technology, 92 (2017), 1/4; 129-138 doi:10.1007/s00170-017-0134-3 (međunarodna recenzija, članak, znanstveni)

doi link.springer.com

1642.

Opačak, Ivan; Putnik, Ivan; Samardžić, Mijat

Influence of the soil particles on the wear of ploughshares during ploughing // Machines, technologies, materials, 11 (2017), 4; 157-160 (međunarodna recenzija, članak, znanstveni)

stumejournals.com stumejournals.com

1643.

Opačak, Ivan; Putnik, Ivan; Šakić, Dejan; Marušić, Vlatko

The impact of tribocorrosion on wear of work parts of the screw press // Machines, technologies, materials, 11 (2017), 6; 323-326 (recenziran, članak, znanstveni)

stumejournals.com

1644.

Boutanios, Ziad; Jasak, Hrvoje

Two-way coupled Eulerian-Eulerian simulations of drifting snow with viscous treatment of the snow phase // Journal of wind engineering and industrial aerodynamics, 169 (2017), 67-76 doi:10.1016/j.jweia.2017.07.006 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com doi.org

1645.

Pavičević, Matija; Novosel, Tomislav; Pukšec, Tomislav; Duić, Neven

Hourly optimization and sizing of district heating systems considering building refurbishment – Case study for the city of Zagreb // Energy (Oxford), 137 (2017), 1264-1276 doi:10.1016/j.energy.2017.06.105 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

1646.

Penga, Željko; Pivac, Ivan; Barbir, Frano

Experimental Validation of Variable Temperature Flow Field Concept for Proton Exchange Membrane Fuel Cells // International journal of hydrogen energy, 42 (2017), 41; 26084-26093 doi:10.1016/j.ijhydene.2017.08.135 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com doi.org

1647.

Pivac, Ivan; Šimić, Boris; Barbir, Frano

Experimental diagnostics and modeling of inductive phenomena at low frequencies in impedance spectra of proton exchange membrane fuel cells // Journal of power sources, 365 (2017), 240-248 doi:10.1016/j.jpowsour.2017.08.087 (međunarodna recenzija, članak, znanstveni)

doi doi.org www.sciencedirect.com

1648.

Panić, Nenad; Katana, Branko; Mrčela, Zvonimir Ivan

Determining an Allowable Wear of Worm Wheels // Transactions of FAMENA, 41 (2017), 2; 55-60 doi:10.21278/tof.41205 (međunarodna recenzija, članak, znanstveni)

doi hrcak.srce.hr

1649.

Snider, Chris; Škec, Stanko; Gopsill, James; Hicks, Ben.

The characterisation of engineering activity through email communication and content dynamics, for support of engineering project management // Design Science, 3 (2017), 22, 31 doi:10.1017/dsj.2017.16 (međunarodna recenzija, članak, znanstveni)

doi doi.org

1650.

Jakovljević, Suzana; Lisjak, Dragutin; Alar, Željko; Penava, Frano

The influence of humidity on mechanical properties of bamboo for bicycles // Construction and building materials, 150 (2017), 35-48 doi:10.1016/j.conbuildmat.2017.05.189 (međunarodna recenzija, članak, znanstveni)

doi dx.doi.org www.sciencedirect.com

1651.

Miler, Daniel; Lončar, Antonio; Žeželj, Dragan; Domitran, Zoran

Influence of profile shift on the spur gear pair optimization // Mechanism and machine theory, 117 (2017), 189-197 doi:10.1016/j.mechmachtheory.2017.07.001 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com doi.org

1652.

Kotarski, Denis; Piljek, Matija; Tevčić, Marina; Vyroubal, Vedran

Mathematical Modelling and Dynamics Analysis of Flat Multirotor Configurations // WSEAS transactions on systems, 16 (2017), 47-52 (podatak o recenziji nije dostupan, članak, znanstveni)

wseas.org www.wseas.org

1653.

Wang, Xuebin; Li, Shuaishuai; Adeosun, Adewale; Li, Yan; Vujanović, Milan; Tan, Houzhang; Duić, Neven

Effect of potassium-doping and oxygen concentration on soot oxidation in O2/CO2 atmosphere : A kinetics study by thermogravimetric analysis // Energy conversion and management, 149 (2017), 686-697 doi:10.1016/j.enconman.2017.01.003 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com doi.org

1654.

Sremec, Mario; Taritaš, Ivan; Sjerić, Momir; Kozarac, Darko

Numerical Investigation of Injection Timing Influence on Fuel Slip and Influence of Compression Ratio on Knock Occurrence in Conventional Dual Fuel Engine // Journal of sustainable development of energy, water and environment systems, 5 (2017), 4; 518-532 doi:10.13044/j.sdewes.d5.0163 (međunarodna recenzija, članak, znanstveni)

doi www.sdewes.org

1655.

Marzi, Giacomo; Dabić, Marina; Daim, Tugrul; Garces, Edwin

Product and process innovation in manufacturing firms : a 30-year bibliometric analysis // Scientometrics, 113 (2017), 2; 673-704 doi:10.1007/s11192-017-2500-1 (međunarodna recenzija, članak, znanstveni)

doi link.springer.com

1656.

Ćurković, Lidija; Jukić, Mirela; Šokčević, Zrinka; Majić Renjo, Marijana

Woody biomass fly ash as a low-cost sorbent for the removal of ionic dye from aqueous solution: Isotherm, kinetic modelling and thermodynamics // Desalination and Water Treatment, 89 (2017), 171-180 doi:10.5004/dwt.2017.21374 (međunarodna recenzija, članak, znanstveni)

doi doi.org

1657.

Vo, Thuc P.; Thai Huu-Tai; Nguyen Trung-Kien; Lanc, Domagoj; Karamanli, Armagan

Flexural analysis of laminated composite and sandwich beams using a four-unknown shear and normal deformation theory // Composite structures, 176 (2017), 388-397 doi:10.1016/j.compstruct.2017.05.041 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com doi.org

1658.

Gatin, Inno; Vukčević, Vuko; Jasak, Hrvoje; Rusche, Henrik

Enhanced coupling of solid body motion and fluid flow in finite volume framework // Ocean engineering, 143 (2017), 295-304 doi:10.1016/j.oceaneng.2017.08.009 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada doi www.sciencedirect.com doi.org

1659.

Janes, Gordan; Perinic, Mladen; Jurkovic, Zoran

APPLYING IMPROVED GENETIC ALGORITHM FOR SOLVING JOB SHOP SCHEDULING PROBLEMS // Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 24 (2017), 4; 1243-1247 doi:10.17559/TV-20150527133957 (podatak o recenziji nije dostupan, prethodno priopćenje, znanstveni)

doi hrcak.srce.hr

1660.

Spoerk, Martin; Arbeiter, Florian; Cajner, Hrvoje; Sapkota, Janak; Holzer, Clemens

Parametric optimization of intra- and inter- layer strengths inparts produced by extrusion- based additive manufacturing ofpoly(lactic acid) // Journal of applied polymer science, 134 (2017), 41; 45401-1 doi:10.1002/app.45401 (međunarodna recenzija, članak, znanstveni)

doi onlinelibrary.wiley.com

1661.

Virag, Lana; Wilson, John S.; Humphrey, Jay D.; Karšaj, Igor

Potential biomechanical roles of risk factors in the evolution of thrombus-laden abdominal aortic aneurysms // International Journal for Numerical Methods in Biomedical Engineering, 33 (2017), 12; e2893 - 1 doi:10.1002/cnm.2893 (međunarodna recenzija, članak, znanstveni)

doi onlinelibrary.wiley.com

1662.

Marenić, Eduard; Brancherie, Delphine; Bonnet, Marc

Application of asymptotic analysis to the two-scale modeling of small defects in mechanical structures // International journal of solids and structures, 128 (2017), 199-209 doi:10.1016/j.ijsolstr.2017.08.029 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada doi www.sciencedirect.com doi.org hal.archives-ouvertes.fr

1663.

Pehilj, Anida; Krstulović-Opara, Lovre; Bagavac, Petra; Vesenjak, Matej; Duarte, Isabel; Domazet, Željko

The detection of plastic flow propagation based on the temperature gradient // Materials today: proceedings, 4 (2017), 5; 5925-5930 doi:10.1016/j.matpr.2017.06.071 (međunarodna recenzija, članak, znanstveni)

doi

1664.

Franulović, Marina; Basan, Robert; Prebil, Ivan; Trajkovski, Ana; Marohnić, Tea

Materials characterization – From metals to soft tissues // Materials discovery, 7 (2017), 1-7 doi:10.1016/j.md.2017.05.001 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

1665.

Tomić, Davor; Fudurić, Ana; Mihalić, Tihomir; Šimunić, Nikola

DIMENSIONAL ACCURACY OF PROTOTYPES MADE WITH FDM TECHNOLOGY // Journal of energy technology, 10 (2017), 2; 51-59 (podatak o recenziji nije dostupan, članak, znanstveni)

Pristup cjelovitom tekstu rada

1666.

Balić, Dražen; Maljković, Danica; Lončar, Dražen

Multi-criteria analysis of district heating system operation strategy // Energy conversion and management, 144 (2017), 414-428 doi:10.1016/j.enconman.2017.04.072 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com doi.org

1667.

Živković, Dražen; Mišina, Nedjeljko; Ljumović, Petar

Corrosion Damage of Seam Welded Galvanized Hot Water Pipelines // Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 24 (2017), 4; 1007-1012 doi:10.17559/TV-20170112142442 (međunarodna recenzija, članak, znanstveni)

doi

1668.

Mihaljević, Morana; Cajner, Hrvoje; Runje, Biserka; Markučič, Damir; Keran, Zdenka

Analysis of the couplant influence on the ultrasonic thickness measurement of the steel grade S355J0 = Untersuchung des Einflusses des Koppelmittels auf die Ultraschall-Messung der Probendicke des Stahls S355J0 // Materialwissenschaft und Werkstofftechnik, 48 (2017), 8; 803-813 doi:10.1002/mawe.201700050 (međunarodna recenzija, članak, znanstveni)

doi onlinelibrary.wiley.com onlinelibrary.wiley.com

1669.

Milovancevic, Milos; Nikolic, Vlastimir; Pavlovic, Nenad T.; Veg, Aleksandar; Troha, Sanjin

Vibration prediction of pellet mills power transmission by artificial neural network // Assembly Automation, 37 (2017), 4; 01-08 doi:10.1108/AA-06-2016-060 (međunarodna recenzija, članak, znanstveni)

doi

1670.

Stefanović-Marinović, Jelena; Troha, Sanjin; Milovančević, Miloš

An application of multicriteria optimization to the two-carrier two-speed planetary gear trains // Facta Universitatis. Series: mechanical engineering, 15 (2017), 1; 85-95 doi:10.22190/FUME160307002S (međunarodna recenzija, članak, znanstveni)

doi casopisi.junis.ni.ac.rs

1671.

Horvatić Novak, Amalija; Runje, Biserka; Stepanić, Josip

Capabilities of industrial computed tomography in the field of dimensional measurements // Advances ifn production engineering & practices, 12 (2017), 3; 245-253 doi:10.14743/apem2017.3.255 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada doi apem-journal.org doi.org

1672.

Žmak, Irena; Hartmann, Carina

Current state of the plastic waste recycling system in the European Union and in Germany // Tehnički glasnik - Technical Journal, 11 (2017), 3; 138-142 (međunarodna recenzija, članak, znanstveni)

1673.

Šuligoj, Filip; Švaco, Marko; Jerbić, Bojan; Šekoranja, Bojan; Vidaković, Josip

Automated marker localization in the planning phase of robotic neurosurgery // IEEE access, 5 (2017), 12265-12274 doi:10.1109/ACCESS.2017.2718621 (međunarodna recenzija, članak, znanstveni)

doi ieeexplore.ieee.org

1674.

Damjanović, Darko; Kozak, Dražan; Matvienko, Yuriy; Gubeljak, Nenad

Correlation of Pipe Ring Notched Bend (PRNB) specimen and Single Edge Notch Bend (SENB) specimen in determination of fracture toughness of pipe material // Fatigue & fracture of engineering materials & structures, 40 (2017), 8; 1251-1259 doi:10.1111/ffe.12581 (međunarodna recenzija, članak, znanstveni)

doi onlinelibrary.wiley.com

1675.

Franulović, Marina; Marković, Kristina; Vrcan, Željko; Šoban, Matija

Experimental and analytical investigation of the influence of pitch deviations on the loading capacity of HCR spur gears // Mechanism and machine theory, 117 (2017), 96-113 doi:10.1016/j.mechmachtheory.2017.07.006 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com doi.org

1676.

Tomić, Tihomir; Schneider, Daniel Rolph

Municipal solid waste system analysis through energy consumption and return approach // Journal of environmental management, 203 (2017), Part 3; 973-987 doi:10.1016/j.jenvman.2017.06.070 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com doi.org www.sciencedirect.com

1677.

Cvitanić, Vedrana; Kovačić, Maja

Algorithmic Formulations of Evolutionary Anisotropic Plasticity Models based on Non-Associated Flow Rule // Latin American Journal of Solids and Structures, 14 (2017), 10; 1853-1871 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada

1678.

Kuznetsov, Sergey; Ribičić, Matko; Pospíšil, Stanislav; Plut, Mihael; Trush, Arsenii; Kozmar, Hrvoje

Flow and turbulence control in a boundary layer wind tunnel using passive hardware devices // Experimental techniques, 41 (2017), 6; 643-661 doi:10.1007/s40799-017-0196-z (međunarodna recenzija, članak, znanstveni)

doi link.springer.com

1679.

Maretić, Mauro; Smoljan, Božo; Iljkić, Dario

Heat treatment of electroless Ni-P layers on an austenitic stainless-steel substrate // Materiali in tehnologije, 51 (2017), 3; 413-417 doi:10.17222/mit.2016.010 (međunarodna recenzija, članak, znanstveni)

doi

1680.

Jakovljević, Suzana; Alar, Vesna; Ivanković, Antonio

Electrochemical Behaviour of PACVD TiN-Coated CoCrMo Medical Alloy // Metals, 7 (2017), 7; 231-245 doi:10.3390/met7070231 (međunarodna recenzija, članak, znanstveni)

doi www.mdpi.com www.mdpi.com

1681.

Gjeldum, Nikola; Crnjac, Marina; Bilić, Boženko

Simulation of Bullwhip Effect in a Supply Chain for Lean Learning Factory Purposes // International journal of simulation modelling, 16 (2017), 4; 576-589 doi:Int j simul model 16 (2017) 4, 576 - 589 ISSN 1726 - 4529 Original scientific paper https://.org/ 10.2507/ IJSIMM16(4)2.390 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada doi www.ijsimm.com

1682.

Bajić, Darko; Momčilović, Nikola; Maneski, Taško; Balać, Martina; Kozak, Dražan; Ćulafić, Stefan

Numerical and experimental determination of stress concentration factor for a pipe branch model // Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 24 (2017), 3; 687-692 doi:10.17559/TV-20151126222916 (međunarodna recenzija, članak, znanstveni)

doi

1683.

Perović, Milenko; Baloš, Sebastian; Kozak, Dražan; Bajić, Darko; Vuherer, Tomaž

Influence of kinematic factors of friction stir welding on the characteristics of welded joints of forged plates made of EN AW 7049 A aluminium alloy // Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 24 (2017), 3; 723-728 doi:10.17559/TV-20160417122830 (međunarodna recenzija, članak, znanstveni)

doi

1684.

Shneba, Giuma Ali; Veg, Aleksandar; Kozak, Dražan; Sedmak, Aleksandar

Mechatronic approach to inventing a novel kind of deformeter // Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 24 (2017), 3; 737-743 doi:10.17559/TV-20160711123437 (međunarodna recenzija, članak, znanstveni)

doi

1685.

Damjanović, Darko; Kozak, Dražan; Marsoner, Stefan; Gubeljak, Nenad

Residual stress state in pipe cut ring specimens for fracture toughness testing // Materialprufung, 59 (2017), 530-535 doi:10.3139/120.111038 (međunarodna recenzija, članak, znanstveni)

doi www.hanser-elibrary.com

1686.

Mrzljak, Vedran; Medica, Vladimir; Bukovac, Ozren

QUASI-DIMENSIONAL DIESEL ENGINE MODEL WITH DIRECT CALCULATION OF CYLINDER TEMPERATURE AND PRESSURE // Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 24 (2017), 3; 681-686 doi:10.17559/TV-20151116115801 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada doi

1687.

Piljek, Petar; Runje, Biserka; Keran, Zdenka; Škunca, Marko

Monte Carlo Simulation of Measurement Uncertainty in Modified Hydraulic Bulging Determination of Flow Stress // Technical Gazette, 24 (2017), 3; 649-653 doi:10.17559/TV-20140828211548 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada doi

1688.

Cardiff, Philip; Tuković, Željko; DeJaeger, Peter; Clancy, Michael; Ivanković, Alojz

A Lagrangian cell-centred finite volume method for metal forming simulation // International journal for numerical methods in engineering, 109 (2017), 13; 1777-1803 doi:10.1002/nme.5345 (međunarodna recenzija, članak, znanstveni)

doi onlinelibrary.wiley.com

1689.

Kostadin, Tihana; Cukor, Goran; Jakovljević, Suzana

Analysis of corrosion resistance when turning martensitic stainless steel X20Cr13 under chilled air-cooling // Advances ifn production engineering & practices, 12 (2017), 2; 105-114 doi:10.14743/apem2017.2.243 (međunarodna recenzija, članak, znanstveni)

doi apem-journal.org doi.org

1690.

Xiong, Yingying; Tan, Houzhang; Wang, Yibin; Xu, Weigang; Mikulčić, Hrvoje; Duić, Neven

Pilot-scale study on water and latent heat recovery from flue gas using fluorine plastic heat exchangers // Journal of cleaner production, 161 (2017), 1416-1422 doi:10.1016/j.jclepro.2017.06.081 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com doi.org

1691.

Grljušić, Mirko; Tolj, Ivan; Radica, Gojmir

An Investigation of the Composition of the Flow in and out of a Two-stroke Diesel engine and Air Consumption Ratio // Energies, 10 (2017), 6; 805-1 doi:10.3390/en10060805 (međunarodna recenzija, članak, znanstveni)

doi www.mdpi.com

1692.

Barković, Denis; Kunica, Zoran; Belić, Damir

Sustav za automatsko sortiranje otpada - rješenje za Zagreb? // EGE (Energetika, gospodarstvo, ekologija i etika), XXV. (2017), 4; 102-105 (podatak o recenziji nije dostupan, članak, znanstveni)

www.ege.hr

1693.

Pospíšil, Stanislav; Kuznetsov, Sergey; Kozmar, Hrvoje, Michalcová, Vladimíra

Wind-tunnel simulation of thermally unstable atmospheric flow in complex terrain // Procedia engineering, 190 (2017), 575-580 doi:10.1016/j.proeng.2017.05.382 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

1694.

Baleta, Jakov; Martinjak, Matija; Vujanović, Milan; Pachler, Klaus; Wang, Jin; Duić, Neven

Numerical analysis of ammonia homogenization for selective catalytic reduction application // Journal of environmental management, 203 (2017), Part 3; 1047-1061 doi:10.1016/j.jenvman.2017.04.103 (međunarodna recenzija, članak, znanstveni)

doi doi.org www.sciencedirect.com

1695.

Alar, Vesna; Žmak, Irena; Stojanović, Ivan; Šimunović, Vinko; Čeralinac, Zoran

Abrasion and erosion wear of electrodeposited nickel – silicon carbide nanocomposite coatings = Abrasiv- und Erosionsverschleiß von galvanisch Nickel-Siliciumkarbid Nanokomposit-Beschichtungen // Materialwissenschaft und Werkstofftechnik, 48 (2017), 8; 785-791 doi:10.1002/mawe.201700017 (međunarodna recenzija, članak, znanstveni)

doi onlinelibrary.wiley.com

1696.

Zorc, Davor

Internet of Things (IoT) in Industrial Engineering Education // Acta Technica Corviniensis, 10 (2017), 2; 97-102 (podatak o recenziji nije dostupan, prethodno priopćenje, znanstveni)

acta.fih.upt.ro acta.fih.upt.ro

1697.

Žmak, Irena; Žalac, Elizabeta; Surjak, Martin; Ćorić, Danko

Properties of biocomposites from waste seashells and PMMA = Eigenschaften von Bioverbundwerkstoffen aus Muschelabfällen und Polymethylmethacrylat // Materialwissenschaft und Werkstofftechnik, 48 (2017), 8; 779-784 doi:10.1002/mawe.201700022 (međunarodna recenzija, članak, znanstveni)

doi onlinelibrary.wiley.com

1698.

Žmak, Irena; Vurnek, Vjekoslav; Šundrica, Jadran

Morphology and flexural properties of biocomposites from Miscanthus × giganteus in polyester resin // Structural integrity and life, 17 (2017), 1; 33-37 (međunarodna recenzija, članak, znanstveni)

1699.

Lalić, Branko; Račić, Nikola; Radica, Gojmir

Two-Stroke Low Speed Diesel Engine Simulation Model for NOx Analysis // Transactions on maritime science, Vol.6 (2017), No.1.; 14-23 doi:: 10.7225/toms.v06.n01.002 (međunarodna recenzija, članak, znanstveni)

doi www.toms.com.hr www.toms.com.hr

1700.

Mijović, Budimir

A Structural Analysis of Carbon Nanotubes // Journal of multidisciplinary engineering science and technology, 4 (2017), 3; 6881-6884 (podatak o recenziji nije dostupan, članak, znanstveni)

www.jmest.org

1701.

Ćorić, Danko

Svojstva i primjena titana i njegovih legura (Drugi dio) // Zavarivanje, 60 (2017), 1/2; 5-14 (podatak o recenziji nije dostupan, članak, znanstveni)

1702.

Lepri, Petra; Večenaj, Željko; Kozmar, Hrvoje; Grisogono, Branko

Bora wind characteristics for engineering applications // Wind and structures, 24 (2017), 6; 579-611 doi:10.12989/was.2017.24.6.579 (međunarodna recenzija, članak, znanstveni)

doi www.techno-press.org

1703.

Trush, Arsenii; Pospíšil, Stanislav; Kuznetsov, Sergey; Kozmar, Hrvoje

Wind-Tunnel Experiments on Vortex-Induced Vibration of Rough Bridge Cables // Journal of bridge engineering, 22 (2017), 10; 06017001-1 doi:10.1061/(ASCE)BE.1943-5592.0001104 (međunarodna recenzija, kratko priopcenje, znanstveni)

doi ascelibrary.org

1704.

Pavlović, Berislav; Pavičević, Matija; Buljac, Andrija; Džijan, Ivo; Kozmar, Hrvoje

Design Curves for Gas Pressure Drop in Excess Flow Safety Valve // Journal of Pipeline Systems Engineering and Practice, 8 (2017), 4; 06017005-1 doi:10.1061/(ASCE)PS.1949-1204.0000288 (međunarodna recenzija, kratko priopcenje, znanstveni)

doi ascelibrary.org

1705.

Živić, Marija; Virag, Zdravko; Galović, Antun

Another view on the optimization of the Brayton cycle with recuperator // Tehnički vjesnik (Strojarski fakultet), 24 (2017), 2; 419-425 doi:10.17559/TV-20160520115040 (međunarodna recenzija, članak, znanstveni)

doi

1706.

Mikulić, Dinko; Košir, Goran

Istraživanje povećanja sigurnosti motornih vozila // Suvremeni promet, 37 (2017), 3/4; 105-115 (podatak o recenziji nije dostupan, prethodno priopćenje, znanstveni)

1707.

Kirinčić, Mateo; Trp, Anica; Lenić, Kristian

Numerical investigation and experimental validation of heat transfer in a small size shell and tube heat exchanger // Engineering review (Technical Faculty University of Rijeka), 37 (2017), 2; 122-133 (međunarodna recenzija, članak, znanstveni)

1708.

Beckstein, Pascal; Galindo, Vladimir; Vukčević, Vuko

Efficient solution of 3D electromagnetic eddy-current problems within the finite volume framework of OpenFOAM // Journal of computational physics, 344 (2017), 623-646 doi:10.1016/j.jcp.2017.05.005 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com doi.org

1709.

Blecich, Paolo; Bonefačić, Igor; Wolf, Igor

Space heating and cooling energy demand in energy efficient single-family house with mechanical ventilation system // Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 24 (2017), Suppl. 1; 119-126 doi:10.17559/TV-20150112153930 (međunarodna recenzija, članak, znanstveni)

doi www.tehnicki-vjesnik.com

1710.

Masatović, Melani; Ciliga, Elvis; Kršulja, Marko

Ispitivanje zvučne izolacije u novoizgrađenoj zgradi // Zbornik Veleučilišta u Rijeci / Journal of the Polytechnic of Rijeka, 5 (2017), 1; 159-174 doi:10.31784/zvr.5.1.11 (međunarodna recenzija, članak, znanstveni)

doi

1711.

Putar, Filip; Sorić, Jurica; Lesičar, Tomislav; Tonković, Zdenko

Damage modeling employing strain gradient continuum theory // International journal of solids and structures, 120 (2017), 171-185 doi:10.1016/j.ijsolstr.2017.04.039 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada doi www.sciencedirect.com doi.org

1712.

Sjerić, Momir; Taritaš, Ivan; Kozarac, Darko

Effect of Spark Plug Geometry on the Cyclic Combustion Variability and Fuel Consumption of Gasoline Engine // Journal of energy engineering, 143 (2017), 6; 04017063, 11 doi:10.1061/(ASCE)EY.1943-7897.0000492 (međunarodna recenzija, članak, znanstveni)

doi ascelibrary.org

1713.

Šolić, Tomislav; Marić, Dejan; Jagodić, Željko; Samardžić, Ivan

Testing of the shopprimer’s influence on the quality of welded joint // Metalurgija, 56 (2017), 3-4; 357-360 (međunarodna recenzija, članak, znanstveni)

hrcak.srce.hr

1714.

Cao, Ruijie; Tan, Houzhang; Xiong, Yingying; Mikulčić, Hrvoje; Vujanović, Milan; Wang, Xuebin; Duić, Neven

Improving the removal of particles and trace elements from coal-fired power plants by combining a wet phase transition agglomerator with wet electrostatic precipitator // Journal of cleaner production, 161 (2017), 1459-1465 doi:10.1016/j.jclepro.2017.05.046 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com doi.org

1715.

Mrzljak, Vedran; Poljak, Igor; Medica-Viola, Vedran

Dual fuel consumption and efficiency of marine steam generators for the propulsion of LNG carrier // Applied thermal engineering, 119 (2017), 331-346 doi:10.1016/j.applthermaleng.2017.03.078 (međunarodna recenzija, članak, znanstveni)

doi doi.org www.sciencedirect.com

1716.

Mrzljak, Vedran; Poljak, Igor; Mrakovčić, Tomislav

Energy and exergy analysis of the turbo-generators and steam turbine for the main feed water pump drive on LNG carrier // Energy conversion and management, 140 (2017), 307-323 doi:10.1016/j.enconman.2017.03.007 (međunarodna recenzija, članak, znanstveni)

doi doi.org www.sciencedirect.com

1717.

Mrzljak, Vedran; Poljak, Igor; Medica-Viola, Vedran

Thermodynamical analysis of high-pressure feed water heater in steam propulsion system during exploitation // Brodogradnja, 68 (2017), 2; 45-61 doi:10.21278/brod68204 (domaća recenzija, prethodno priopćenje, znanstveni)

doi hrcak.srce.hr doi.org hrcak.srce.hr

1718.

Mrzljak, Vedran; Poljak, Igor; Medica-Viola, Vedran

Energy and Exergy Efficiency Analysis of Sealing Steam Condenser in Propulsion System of LNG Carrier // Naše more, 64 (2017), 1; 20-25 doi:10.17818/NM/2017/1.4 (domaća recenzija, prethodno priopćenje, znanstveni)

doi hrcak.srce.hr doi.org

1719.

Ranogajec, Vanja; Deur, Joško

An Automated Model-Order Reduction Method for Automatic Transmissions // Journal of dynamic systems, measurement, and control, 139 (2017), 7; 071004-1 doi:10.1115/1.4035607 (međunarodna recenzija, članak, znanstveni)

doi dynamicsystems.asmedigitalcollection.asme.org

1720.

Vukčević, Vuko; Jasak, Hrvoje; Gatin, Inno

Implementation of the Ghost Fluid Method for Free Surface Flows in Polyhedral Finite Volume Framework // Computers & fluids, 153 (2017), 1-19 doi:10.1016/j.compfluid.2017.05.003 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com doi.org

1721.

Vukasović, Marko; Pavazza, Radoslav; Vlak, Frane

Analytic solution for torsion of thin-walled laminated composite beams of symmetrical open cross sections with influence of shear // Archive of applied mechanics, 87 (2017), 8; 1371-1384 doi:10.1007/s00419-017-1256-7 (međunarodna recenzija, članak, znanstveni)

doi link.springer.com

1722.

Hadžić, Neven; Tomić, Marko

Analytical solution of steady-state behavior of Bernoulli production line with two finite buffers // Brodogradnja, 68 (2017), 3; 85-102 doi:10.21278/brod68306 (međunarodna recenzija, članak, znanstveni)

doi doi.org

1723.

Blažević, Sebastijan; Braut, Sanjin; Skoblar, Ante; Žigulić, Roberto

Electromechanical Vibrations of the Vertical Lathe Machining Centre Caused by the Fault of the Working Table Rolling Bearing // FME Transaction, 45 (2017), 3; 374-381 doi:10.5937/fmet1703374B (međunarodna recenzija, članak, znanstveni)

doi www.mas.bg.ac.rs

1724.

Skoblar, Ante; Žigulić, Roberto; Braut, Sanjin; Blažević, Sebastijan

Dynamic Response to Harmonic Transverse Excitation of Cantilever Euler-Bernoulli Beam Carrying a Point Mass // FME Transaction, 45 (2017), 3; 367-373 doi:10.5937/fmet1703367S (međunarodna recenzija, članak, znanstveni)

doi www.mas.bg.ac.rs

1725.

Vukelić, Goran; Brnić, Josip

Numerical prediction of fracture behavior for austenitic and martensitic stainless steels // International Journal of Applied Mechanics, 9 (2017), 4; 1750052-1 doi:10.1142/S1758825117500521 (međunarodna recenzija, članak, znanstveni)

doi www.worldscientific.com doi.org

1726.

Taritaš, Ivan; Sremec, Mario; Kozarac, Darko; Blažić, Mislav; Lulić, Zoran

The Effect of Operating Parameters on Dual Fuel Engine Performance and Emissions – An Overview // Transactions of FAMENA, 41 (2017), 1; 1-14 doi:10.21278/TOF.41101 (međunarodna recenzija, članak, znanstveni)

doi doi.org hrcak.srce.hr

1727.

Wang, Jin; Li , QianQian; Sundén , Bengt; Baleta, Jakov; Vujanović, Milan

Two-phase flow simulation of mist film cooling with deposition for various boundary conditions // Numerical heat transfer. Part A : Applications, 71 (2017), 9; 895-909 doi:10.1080/10407782.2017.1326790 (međunarodna recenzija, članak, znanstveni)

doi www.tandfonline.com doi.org

1728.

Wang, Jin; Liu, Yiwei; Sundén, Bengt; Yang, Ran; Baleta, Jakov; Vujanović, Milan

Analysis of slab heating characteristics in a reheating furnace // Energy conversion and management, 149 (2017), 928-936 doi:10.1016/j.enconman.2017.04.005 (međunarodna recenzija, članak, znanstveni)

doi doi.org www.sciencedirect.com

1729.

Jakopčić, Mirko; Landek, Darko

Abrasion resistance of surface-modified steels used for artillery weapon barrels // Transactions of FAMENA, XLI (2017), 1; 15-20 doi:10.21278/TOF.41102 (međunarodna recenzija, članak, znanstveni)

doi

1730.

Tomić, Tihomir; Dominković, Dominik Franjo; Pfeifer, Antun; Schneider, Daniel Rolph; Pedersen, Allan Schrøder; Duić, Neven

Waste to energy plant operation under the influence of market and legislation conditioned changes // Energy (Oxford), 137 (2017), 1119-1129 doi:10.1016/j.energy.2017.04.080 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com doi.org

1731.

Ranogajec, Vanja; Deur, Joško

Bond graph analysis and optimal control of the hybrid dual clutch transmission shift process // Proceedings of the institution of mechanical engineers part k-journal of multi-body dynamics, 231 (2017), 3; 480-492 doi:10.1177/1464419317705989 (međunarodna recenzija, članak, znanstveni)

doi journals.sagepub.com

1732.

Aleksandrov Fabijanić, Tamara; Ćorić, Danko; Šnajdar Musa, Mateja; Sakoman, Matija

Vickers indentation fracture toughness of near- nano and nanostructured WC-Co cemented carbides // Metals, 7 (2017), 143; 143-1 doi:10.3390/met7040143 (međunarodna recenzija, članak, znanstveni)

doi www.mdpi.com

1733.

Smoljan, Božo; Iljkić, Dario; Štic, Lovro; Kolumbić, Zvonimir

Mathematical modelling of steel quenching // Materials science forum, 879 (2017), 1813-1818 (podatak o recenziji nije dostupan, članak, znanstveni)

1734.

Taritaš, Ivan; Kozarac, Darko; Sjerić, Momir; Sierra Aznar, Miguel; Vuilleumier, David; Tatschl, Rainhard

Development and Validation of a Quasi-Dimensional Dual Fuel (Diesel – Natural Gas) Combustion Model // SAE International journal of engines, 10 (2017), 2; 483-500 doi:10.4271/2017-01-0517 (međunarodna recenzija, članak, znanstveni)

doi papers.sae.org papers.sae.org

1735.

Brnić, Josip; Kršćanski, Sanjin; Lanc, Domagoj; Brčić, Marino; Turkalj, Goran; Čanađija, Marko; Niu, Jitai

Analysis of the Mechanical Behavior, Creep Resistance and Uniaxial Fatigue Strength of Martensitic Steel X46Cr13 // Materials, 10 (2017), 4; 388-406 doi:10.3390/ma10040388 (međunarodna recenzija, članak, znanstveni)

doi www.mdpi.com

1736.

Čehil, Mislav; Katulić, Stjepko; Schneider, Daniel Rolph

Novel method for determining optimal heat-exchanger layout for heat recovery steam generators // Energy conversion and management, 149 (2017), 851-859 doi:10.1016/j.enconman.2017.03.033 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

1737.

Ćurković, Milan; Vučina, Damir; Ćurković, Andrijana

Enhanced 3D parameterization for integrated shape synthesis by fitting parameter values to point sets // Integrated computer-aided engineering, 24 (2017), 3; 241-260 doi:10.3233/ICA-170541 (međunarodna recenzija, članak, znanstveni)

doi content.iospress.com content.iospress.com

1738.

Ranogajec, Vanja; Deur, Joško

A Bond Graph-Based Method of Automated Generation of Automatic Transmission Mathematical Model // SAE International journal of engines, 10 (2017), 3; 1367-1374 doi:10.4271/2017-01-1142 (podatak o recenziji nije dostupan, članak, znanstveni)

doi repozitorij.fsb.hr

1739.

Ćurković, Lidija; Žmak, Irena; Kurajica, Stanislav; Tonković, Martina Eva; Šokčević, Zrinka; Majić Renjo, Marijana

From eggshells biowaste to hydroxyapatite biomaterial = Von Eierschalen als Bioabfall bis zum Hydroxylapatit-Biomaterial // Materialwissenschaft und Werkstofftechnik, 48 (2017), 8; 797-802 doi:10.1002/mawe.201700052 (međunarodna recenzija, članak, znanstveni)

doi onlinelibrary.wiley.com

1740.

Ćorić, Danko; Majić Renjo, Marijana; Žmak, Irena

Critical evaluation of indentation fracture toughness measurements with Vickers indenter on yttria-stabilized zirconia dental ceramics = Kritische Bewertung der mittels Vickers-Indentierung ermittelten Bruchzähigkeit von mit Yttriumoxid stabilisierten tetragonalen Zirkonoxid-Dentalkeramiken // Materialwissenschaft und Werkstofftechnik, 48 (2017), 8; 767-772 doi:10.1002/mawe.201700026 (međunarodna recenzija, članak, znanstveni)

doi onlinelibrary.wiley.com

1741.

Lesičar, Tomislav; Tonković, Zdenko; Sorić, Jurica

Two-Scale Computational Approach Using Strain Gradient Theory at Microlevel // International journal of mechanical sciences, 126 (2017), 67-68 doi:10.1016/j.ijmecsci.2017.02.017 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com dx.doi.org

1742.

Petranović, Zvonimir; Bešenić, Tibor; Vujanović, Milan; Duić, Neven

Modelling pollutant emissions in diesel engines, influence of biofuel on pollutant formation // Journal of environmental management, 203 (2017), Part 3; 1038-1046 doi:10.1016/j.jenvman.2017.03.033 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com doi.org

1743.

Rujnić-Sokele, Maja; Pilipović, Ana

Challenges and opportunities of biodegradable plastics: A mini review // Waste management & research, 35 (2017), 2; 132-140 doi:10.1177/0734242X16683272 (međunarodna recenzija, pregledni rad, znanstveni)

doi journals.sagepub.com

1744.

Vukelić, Djordje; Budak, Igor; Tadić, Branko; Šimunović, Goran; Kljajić, Vladimir; Agarski, Boris

Multi-criteria decision-making and life cycle assessment model for optimal product selection: case study of knee support // International Journal of Environmental Science and Technology, 14 (2017), 2; 353-364 doi:10.1007/s13762-016-1151-8 (međunarodna recenzija, članak, znanstveni)

doi link.springer.com

1745.

Hokamoto, Kazuyuki; Shimomiya, Koshiro; Nishi, Masatoshi; Krstulović-Opara, Lovre; Vesenjak, Matej; Ren, Zoran

Synthesis of Unidirectional Porous-Structured Aluminium through Explosive Compaction Using Cylindrical Geomatry // Journal of the Japan Society for Technology of Plasticity, 58 (2017), 673; 156-160 (podatak o recenziji nije dostupan, članak, znanstveni)

e-journal.jstp.or.jp

1746.

Banduka, Nikola; Mladineo, Marko; Eric, Milan

Designing a layout using a Schmigalla method combined with software tool visTable // International journal of simulation modelling, 16 (2017), 3; 375-385 doi:10.2507/IJSIMM16(3)1.379 (međunarodna recenzija, članak, znanstveni)

doi www.ijsimm.com

1747.

Cho, Dae Seung; Kim, Byung Hee; Kim, Jin Hyeong; Vladimir, Nikola; Choi, Tae Muk

Simplified dynamic analysis of stepped thickness rectangular plate structures by the assumed mode method // Proceedings of the Institution of Mechanical Engineers Part M-Journal of Engineering for the Maritime Environment, 231 (2017), 1; 177-187 doi:10.1177/1475090216630001 (međunarodna recenzija, članak, znanstveni)

doi journals.sagepub.com

Pregled po znanstvenom području: Strojarstvo (MB: 2.11)

Radovi u časopisima

Znanstveni i pregledni radovi