Pregled po znanstvenom području: Strojarstvo (MB: 2.11)

1348.

Gjeldum, Nikola; Mladineo, Marko; Crnjac, Marina; Veža, Ivica; Aljinović, Amanda

Performance analysis of the RFID system for optimal design of the intelligent assembly line in the learning factory // Procedia manufacturing., 23 (2018), 63-68 doi:10.1016/j.promfg.2018.03.162 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada doi

1349.

Jin, Wang; VujanoviĆ, Milan; Bengt, Sunden

A review of multiphase flow and deposition effects in film-cooled gas turbines // Thermal science, 22 (2018), 5; 1905-1921 doi:10.2298/tsci180108258w (međunarodna recenzija, pregledni rad, znanstveni)

doi www.doiserbia.nb.rs

1350.

Barretta, Raffaele; Čanađija, Marko; Luciano, Raimondo; Marotti de Sciarra, Francesco

Stress-Driven Modeling of Nonlocal Thermoelastic Behavior of Nanobeams // International journal of engineering science, 126 (2018), 53-67 doi:10.1016/j.ijengsci.2018.02.012 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

1351.

Barretta, Raffaele; Čanađija, Marko; Feo, Luciano; Luciano, Raimondo; Marotti de Sciarra, Francesco; Penna, Rosa

Exact solutions of inflected functionally graded nano-beams in integral elasticity // Composites. Part B, Engineering, 142 (2018), 273-286 doi:10.1016/j.compositesb.2017.12.022 (međunarodna recenzija, članak, znanstveni)

doi

1352.

Martinić, Frane; Radica, Gojmir; Barbir, Frano

Application and Analysis of Solid Oxide Fuel Cells in Ship Energy System // Brodogradnja, 69 (2018), 4; 53-68 doi:10.21278/brod69405 (međunarodna recenzija, članak, znanstveni)

doi

1353.

Poljak, Ivan; Županović, Paško; Barbir, Frano

Measurement of Proton Concentration in PEM by Hall Effect // Fuel cells, 18 (2018), 4; 408-412 doi:10.1002/fuce.201700189 (međunarodna recenzija, članak, znanstveni)

doi onlinelibrary.wiley.com

1354.

Veić, Mario; Jozić, Sonja; Bajić, Dražen

Surface roughness modelling in super duplex stainless steel turning // International journal for engineering modelling, 31 (2018), 3; 19-34 (međunarodna recenzija, članak, znanstveni)

hrcak.srce.hr

1355.

Runje, Vedran; Mihalić, Tihomir; Kostadin, Tihana

IMPROVEMENT OF A WEEDHOPPER 2 ULTRALIGHT AIRCRAFT BY USING MODERN MATERIALS // Journal Of Energy Technology - JET, 11 (2018), 4; 29-40 doi:2463-7815 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada doi www.fe.um.si

1356.

Švaco, Marko; Vitez, Nikola; Šekoranja, Bojan; Šuligoj, Filip

Tuning of Parameters for Robotic Contouring Based on the Evaluation of Force Deviation // Transactions of FAMENA, 42 (2018), 3; 33-45 doi:10.21278/TOF.42302 (međunarodna recenzija, članak, znanstveni)

doi hrcak.srce.hr

1357.

Miketić, Branimir; Stojanović, Ivan

Utjecaj pripreme površine na prionjivost i potrošnju premaza // Zavarivanje, 61 (2018), 5/6; 143-156 (domaća recenzija, prethodno priopćenje, znanstveni)

1358.

Opetuk, Tihomir; Đukić, Goran; Cajner, Hrvoje; Kolar, Davor

Green supply chain management in Croatian companies // Tehnički glasnik, 12 (2018), 4; 211-220 doi:10.31803/tg-20180207144632 (međunarodna recenzija, članak, znanstveni)

doi hrcak.srce.hr doi.org hrcak.srce.hr

1359.

Đukić, Goran; Opetuk, Tihomir; Cajner, Hrvoje; Jakovljević, Matko

Simulation analysis of models for estimation of empty travel time of vehicles in non-automated material handling systems // FME Transaction, 46 (2018), 3; 336-341 doi:10.5937/fmet1803336d (međunarodna recenzija, članak, znanstveni)

doi

1360.

Heffer, Goran; Samardžić, Ivan; Schauperl, Zdravko; Vidaković, Ivan

Wear of induction cladded coating in the abrasive mass at various speeds and impact angles // Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 25 (2018), 6; 1776-1782 doi:.org/10.17559/TV-20180706121545 (međunarodna recenzija, članak, znanstveni)

doi hrcak.srce.hr hrcak.srce.hr hrcak.srce.hr

1361.

Brnić, Josip; Kršćanski, Sanjin; Brčić, Marino

Comparison of the mechanical behavior of materials subjected to specific operating conditions // IOP conference series. Materials science and engineering, 378 (2018), 1; 35-40 doi:10.1088/1757-899X/378/1/012007 (međunarodna recenzija, članak, znanstveni)

doi iopscience.iop.org

1362.

Delimar, Domagoj; Bohaček, Ivan; Dimnjaković, Damjan; Viderščak, Dalibor; Schauperl, Zdravko

Femoral head wear and metallosis caused by damaged titanium porous coating after primary metal-on-polyethylene total hip arthroplasty: a case report // Croatian medical journal, 59 (2018), 5; 253-257 doi:10.3325/cmj.2018.59.253 (međunarodna recenzija, članak, znanstveni)

doi www.cmj.hr www.ncbi.nlm.nih.gov www.researchgate.net

1363.

Cholewa, Tomasz; Balen, Igor; Siuta-Olcha, Alicja

On the influence of local and zonal hydraulic balancing of heating system on energy savings in existing buildings – Long term experimental research // Energy and buildings, 179 (2018), 15; 156-164 doi:10.1016/j.enbuild.2018.09.009 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

1364.

Cigan, Vesna

Terminological collocations and term variation in mechanical engineering discourse // Fluminensia, 30 (2018), 2; 91-120 doi:10.31820/f.30.2.3 (recenziran, članak, znanstveni)

doi hrcak.srce.hr doi.org hrcak.srce.hr

1365.

Lukša, Francisko; Domazet, Željko

Influence of roll neck design and inlet rolling temperature on roll neck service life // Ironmaking & steelmaking, 32 (2018), 4; 54-64 doi:10.1080/03019233.2018.1540523 (međunarodna recenzija, članak, znanstveni)

doi www.tandfonline.com www.tandfonline.com

1366.

Mehmeti, Blerim; Haliti, Fehim; Azizi Bleron; Kelmendi Jeta; Ilijazi Shahiqi, Donika; Jakovljević, Suzana; Anić- Milošević, Sandra

Influence of different orthodontic brackets and chemical preparations of ceramic crowns on shear bond strength // Australasian medical journal, 11 (2018), 2; 107-112 doi:10.21767/amj.2018.3318 (međunarodna recenzija, članak, znanstveni)

doi amj.net.au doi.org

1367.

Horvat, Marko; Srpak, Dunja; Kondić, Veljko; Pus, Igor

Internal verification of coating quality in conformity with the requirements of the EN 1090 standard // Tehnički glasnik - Technical Journal, 12 (2018), 4; 260-264 doi:.org/10.31803/tg-20181004003142 (međunarodna recenzija, pregledni rad, znanstveni)

doi hrcak.srce.hr

1368.

Pavlović, Darko; Bolanča, Antonijo; Golub, Miroslav

Utjecaj nove regulative EU za korištenje bespilotnih letjelica na tehnologije kartiranja i nadzora plinovoda // Inženjerstvo okoliša, 5 (2018), 1-2; 51-60 (domaća recenzija, pregledni rad, znanstveni)

www.gfv.unizg.hr

1369.

Kostadin, Tihana; Cukor, Goran; Jurković, Zoran

Influence of Cutting Fluids on the Corrosion Resistance of X20Cr13 Martensitic Stainless Steel // International Journal of Electrochemical Science, 13 (2018), 12; 11986-11999 doi:10.20964/2018.12.81 (međunarodna recenzija, članak, znanstveni)

doi www.electrochemsci.org

1370.

Filtz, J-R; Hay, B; Arifovic, N; Sadli, M; Failleau, G; Mac Lochlainn, D; Bojkovski, J; Boles, S; Bourson, F; Cohodarevic, S et al.

Speeding-up Scientific Knowledge Transfer and Improvement of Capabilities of emerging European National Metrology Institutes and Designated Institutes in the field of thermal measurements: Benefits and Impacts // Journal of Physics: Conference Series, 1065 (2018), 022001, 4 doi:10.1088/1742-6596/1065/2/022001 (međunarodna recenzija, članak, znanstveni)

doi iopscience.iop.org

1371.

Hodžić, N; Čohodarević, S; Jandrić, N; Strnad, R; Zvizdić, D; Šestan, D; Fernicola, V; Smorgon, D; Iacomini, L; Simić, S et al.

Improving emerging European NMIs’ capabilities in humidity measurement // Journal of Physics: Conference Series, 1065 (2018), 122019, 4 doi:10.1088/1742-6596/1065/12/122019 (međunarodna recenzija, članak, znanstveni)

doi iopscience.iop.org www.imeko2018.org

1372.

Šestan, D; Smorgon, D; Rothmund, P; Iacomini, L; Šariri, K; Fernicola, V; Zvizdić, D; Hodžić, N

Development and preliminary investigation of a modular chamber for calibration of relative humidity instruments // Journal of Physics: Conference Series, 1065 (2018), 122017, 4 doi:10.1088/1742-6596/1065/12/122017 (međunarodna recenzija, članak, znanstveni)

doi iopscience.iop.org

1373.

Zvizdić, Davor; Grgec Bermanec, Lovorka; Šestan, Danijel

Distributed structure of Croatian metrology institute // Journal of Physics: Conference Series, 1065 (2018), 112002, 4 doi:10.1088/1742-6596/1065/11/112002 (međunarodna recenzija, članak, znanstveni)

doi iopscience.iop.org

1374.

Ćurković, Lidija; Ašperger, Danijela; Babić, Sandra; Župan, Josip

Adsorption of enrofloxacin onto natural zeolite: kinetics, thermodynamics, isotherms and error analysis // Indian journal of chemical technology, 25 (2018), 6; 565-571 (međunarodna recenzija, članak, znanstveni)

op.niscair.res.in op.niscair.res.in

1375.

Stefanović-Marinović, Jelena; Troha, Sanjin; Anđelković, Boban; Milovančević, MIloš

Efficiency of Planetary Gear Trains as Criterion for Optimal Solution Selection // Machine design, 10 (2018), 3; 93-98 doi:10.24867/MD.10.2018.3.93-98 (međunarodna recenzija, članak, znanstveni)

doi

1376.

Dorotić, Hrvoje; Pukšec, Tomislav; Duić, Neven

Multi-objective optimization of district heating and cooling systems for a one-year time horizon // Energy (Oxford), 169 (2018), 319-328 (međunarodna recenzija, članak, znanstveni)

www.sciencedirect.com

1377.

Ljubas, Davor; Čizmić, Mirta; Vrbat, Katarina; Stipaničev, Draženka; Repec, Siniša; Ćurković, Lidija; Babić, Sandra

Albendazole degradation possibilities by UV-based advanced oxidation processes // International journal of photoenergy, 2018 (2018), 6181747, 6 doi:10.1155/2018/6181747 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada doi dx.doi.org www.hindawi.com

1378.

Poljak, Igor; Orović, Josip; Mrzljak, Vedran

Energy and Exergy Analysis of the Condensate Pump During Internal Leakage from the Marine Steam Propulsion System // Pomorstvo : journal of maritime studies, 32 (2018), 2; 268-280 doi:10.31217/p.32.2.12 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada doi hrcak.srce.hr hrcak.srce.hr

1379.

Bagavac, Petra; Krstulović-Opara, Lovre; Domazet, Željko.

Pulse Phase Thermography: Impact Damage Retrieval // Materials today: proceedings, 5 (2018), 13; 26578-26583 (međunarodna recenzija, članak, znanstveni)

www.sciencedirect.com

1380.

Koboević, Žarko; Kurtela, Željko; Koboević, Nikša

Risk Assessment Model of Coastal Sea Pollution by Black (Sewage) Waters From Vessels // International journal of maritime engineering, 160 (2018), part A4; A311-A323 doi:10.3940/rina.ijme.2018.a4.496 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada doi www.rina.org.uk

1381.

Šarić, Tomislav; Šimunović, Goran; Vukelić, Đorđe; Šimunović, Katica; Lujić, Roberto

Estimation of CNC Grinding Process Parameters Using Different Neural Networks // Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 25 (2018), 6; 1770-1775 doi:10.17559/TV-20180419095119 (međunarodna recenzija, članak, znanstveni)

doi hrcak.srce.hr

1382.

Perić, Mato; Garašić, Ivica; Nižetić, Sandro; Dedić Jandrek, Hrvoje

Numerical Analysis of Longitudinal Residual Stresses and Deflections in a T-joint Welded Structure Using a Local Preheating Technique // Energies, 11 (2018), 12; 1-13 doi:10.3390/en11123487 (međunarodna recenzija, članak, znanstveni)

doi

1383.

Novaković, Branko

Unification of SR and GR and Four Fundamental Interactions in RAF Theory // International Journal of New Technology and Research (IJNTR), 4 (2018), 11; 26-33 doi:10.31871/IJNTR.4.11.11 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada doi www.ijntr.org

1384.

Novakovic, Branko

Physical Properties of Energy-Momentum Tensor of Gravitational Field in RAF Theory // International Journal of New Technology and Research, 4 (2018), 11; 19-25 doi:10.31871/IJNTR.4.11.10 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada doi www.ijntr.org

1385.

Cvijetić, Gregor; Gatin, Inno; Vukčević, Vuko; Jasak, Hrvoje

Harmonic Balance developments in OpenFOAM // Computers & fluids, 172 (2018), 632-643 doi:10.1016/j.compfluid.2018.02.023 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

1386.

Spoerk, Martin; Gonzalez-Gutierrez, Joamin; Lichal, Christof; Cajner, Hrvoje; R. Berger, Gerald; Schuschnigg, Stephan; Cardon, L.; Holzer, Clemens

Optimisation of the Adhesion of Polypropylene- Based Materials during Extrusion-Based Additive Manufacturing // Polymers, 10 (2018), 5; 490, 16 doi:10.3390/polym10050490 (međunarodna recenzija, članak, znanstveni)

doi doi.org

1387.

Ležaić, Dario; Mihalić, Tihomir; Predin, Andrej

Charging a car in motion wirelessly // Journal of Energy Technology, 11 (2018), 1; 61-66 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada www.fe.um.si

1388.

Špiljar, Željko; Schneider, Daniel Rolph; Drakulić, Miodrag

Analysis of Smoke Stratification and Smoke Layer Thickness in Underground Car Parks // Thermal science, 22 (2018), 5; 1963-1972 doi:10.2298/TSCI180120262S (međunarodna recenzija, članak, znanstveni)

doi thermalscience.vinca.rs

1389.

Sever, Ivana; Žmak, Irena; Ćurković, Lidija; Švagelj, Zrinka

Stabilization of Highly Concentrated Alumina Suspensions by Different Dispersants // Transactions of FAMENA, 42 (2018), 3; 61-70 doi:10.21278/TOF.42304 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada doi hrcak.srce.hr doi.org

1390.

Leder Horina, Jasna; van Rietbergen, Bert; Jurčević Lulić, Tanja

Finite element model of load adaptive remodelling induced by orthodontic forces // Medical engineering & physics, 62 (2018), 63-68 doi:10.1016/j.medengphy.2018.10.005 (međunarodna recenzija, članak, znanstveni)

doi doi.org www.sciencedirect.com

1391.

Senjanović, Ivo; Ćatipović, Ivan; Alujević, Neven; Čakmak, Damjan; Vladimir, Nikola.

Free in-plane and out-of-plane vibrations of rotating thin ring based on the toroidal shell theory // Archives of mechanics, 70 (2018), 5; 429-455 doi:10.24423/aom.3013 (međunarodna recenzija, članak, znanstveni)

doi am.ippt.pan.pl am.ippt.pan.pl

1392.

Pilipović, Ana; Brajlih, Tomaž; Drstvenšek, Igor

Influence of Processing Parameters on Tensile Properties of SLS Polymer Product // Polymers, 10 (2018), 11; 1-18 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada www.mdpi.com

1393.

Dorotić, Hrvoje; Doračić, Borna; Dobravec, Viktorija; Pukšec, Tomislav; Krajačić, Goran; Duić, Neven

Integration of transport and energy sectors in island communities with 100% intermittent renewable energy sources // Renewable & sustainable energy reviews, 99 (2018), 109-124 doi:10.1016/j.rser.2018.09.033 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

1394.

Orović, Josip; Mrzljak, Vedran; Poljak, Igor

Efficiency and Losses Analysis of Steam Air Heater from Marine Steam Propulsion Plant // Energies, 11 (2018), 11; 3019, 18 doi:10.3390/en11113019 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada doi www.mdpi.com www.mdpi.com

1395.

Lozina, Željan; Sedlar, Damir; Tomac, Ivan

An Identification of the unbalanced magnetic pull in generator at excitation and the hydropower machine model validation // MATEC Web of Conferences, 211 (2018), 06003, 6 doi:10.1051/matecconf/201821106003 (međunarodna recenzija, članak, znanstveni)

doi www.matec-conferences.org

1396.

Trapić, Ivan; Pezer, Robert; Sorić, Jurica

Atomistic Modelling of 2D Stress Distribution Around Discontinuities // Transactions of FAMENA, 42 (2018), 3; 47-60 doi:10.21278/tof.42303 (međunarodna recenzija, članak, znanstveni)

doi hrcak.srce.hr

1397.

Lund, Henrik; Duić, Neven; Østergaard, Poul Alberg; Mathiesen, Brian Vad

Future district heating systems and technologies: On the role of smart energy systems and 4th generation district heating // Energy (Oxford), 165 (2018), 614-619 doi:10.1016/j.energy.2018.09.115 (međunarodna recenzija, pregledni rad, znanstveni)

doi

1398.

Marušić, Vlatko; Samardžić, Ivan; Opačak, Ivan; Šakić, Dejan

The Influence of Water on the Properties of Polyester Laminates Made by Manual Air Extrusion // Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 25 (2018), 5; 1395-1398 doi:10.17559/TV-20170628133614 (međunarodna recenzija, prethodno priopćenje, znanstveni)

doi hrcak.srce.hr

1399.

Bebić, Dragan; Stazić, Ladislav; Mišura, Antonija; Komar, Ivan

EDD – economic benefit analysis of extending dry docking interval // Transactions on maritime science, 7 (2018), 2; 164-173 doi:10.7225/toms.v07.n02.006 (međunarodna recenzija, prethodno priopćenje, znanstveni)

doi www.toms.com.hr hrcak.srce.hr

1400.

Pavković, Danijel; Cipek, Mihael; Kljaić, Zdenko; Mlinarić, Tomislav-Josip; Hrgetić, Mario; Zorc, Davor

Damping Optimum-Based Design of Control Strategy Suitable for Battery/Ultracapacitor Electric Vehicles // Energies, 11 (2018), 10; 2854, 26 doi:10.3390/en11102854 (međunarodna recenzija, članak, znanstveni)

doi www.mdpi.com

1401.

Domitran, Zoran; Brezak, Danko; Staroveški, Tomislav; Klaić, Miho; Bruketa, Tomislav

Experimental and finite element analysis of surgical drill bits with and without irrigation channel – A case study approach // Medical engineering & physics, 62 (2018), 29-35 doi:10.1016/j.medengphy.2018.10.004 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

1402.

Tomac, Nikola; Sørby, Knut; Doboviček, Sandro

Formation of Built-Up Layer on the Tool in Turning Operation of Magnesium Alloys // Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 25 (2018), 3; 940-943 (međunarodna recenzija, pregledni rad, znanstveni)

doi.org

1403.

Nyallang Nyamsi, Serge; Tolj, Ivan; Lototskyy, Mykhaylo

Selection of metal hydrides-based thermal energy storage: energy storage efficiency and density targets // International journal of hydrogen energy, 43 (2018), 50; 22568-22583 doi:10.1016/j.ijhydene.2018.10.100 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com www.sciencedirect.com

1404.

Cho, Dae Seung; Kim, Jin Hyeong; Choi, Tae Muk; Kim, Byung Hee; Vladimir, Nikola

Free and forced vibration analysis of arbitrarily supported rectangular plate systems with attachments and openings // Engineering structures, 171 (2018), 1036-1046 doi:10.1016/j.engstruct.2017.12.032 (međunarodna recenzija, članak, znanstveni)

doi

1405.

Monge Soria, Joao Carlos; Mantari Laureano, Jose Luis; Charca Mamani, Samuel; Vladimir, Nikola

An axiomatic/asymptotic evaluation of the best theories for free vibration of laminated and sandwich shells using non-polynomial functions // Engineering structures, 172 (2018), 1011-1024 doi:10.1016/j.engstruct.2018.06.020 (međunarodna recenzija, članak, znanstveni)

doi

1406.

Seleš, Karlo; Lesičar, Tomislav; Tonković, Zdenko; Sorić, Jurica

A Residual Control Staggered Solution Scheme for the Phase-Field Modeling of Brittle Fracture // Engineering fracture mechanics, 205 (2018), 1; 370-386 doi:10.1016/j.engfracmech.2018.09.027 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

1407.

Šuligoj, F.; Jerbić, B.; Švaco, M.; Šekoranja, B.

Fully Automated Point-Based Robotic Neurosurgical Patient Registration Procedure // International Journal of Simulation Modelling, 17 (2018), 3; 458-471 doi:10.2507/ijsimm17(3)442 (međunarodna recenzija, članak, znanstveni)

doi www.ijsimm.com

1408.

Marić, Dejan; Duspara, Miroslav; Cumin, Josip; Samardžić, Ivan

Metalock crack sanation // International journal of advanced manufacturing technology, 97 (2018), 5-8; 2557-2562 doi:10.1007/s00170-018-2155-y (međunarodna recenzija, članak, znanstveni)

doi link.springer.com

1409.

Mustapić, Nenad; Brkić, Vladislav; Kerin, Matija

Subcritical organic ranking cycle based geothermal power plant thermodynamic and economic analysis // Thermal science, 22 (2018), 5; 2137-2150 doi:10.2298/TSCI180104275M (međunarodna recenzija, članak, znanstveni)

doi doi.org

1410.

Jesic, Dusan; Kovac, Pavel; Savkovic, Borislav; Gostimirovic, Marin; Sarjanovic, Dražen; Stanivuk, Tatjana; Taric, Mirfad

Equipment for Towing - BOLLARD 200 T // Machine Design (Novi Sad), 10 (2018), 1; 21-24 doi:10.24867/MD.10.2018.1.21-24 (međunarodna recenzija, članak, znanstveni)

doi www.mdesign.ftn.uns.ac.rs

1411.

Brajković, Tomislav; Perinić, Mladen; Ikonić, Milan

Production planning and optimization of work launch orders using genetic algorithm // Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 25 (2018), 5; 1278-1285 doi:10.17559/TV-20161207195125 (međunarodna recenzija, članak, znanstveni)

doi

1412.

Bedoić, Robert; Filipan, Veljko

Heating Performance Analysis of a Geothermal Heat Pump Working with Different Zeotropic and Azeotropic Mixtures // Journal of sustainable development of energy, water and environment systems, 6 (2018), 2; 240-253 doi:10.13044/j.sdewes.d5.0189 (međunarodna recenzija, članak, znanstveni)

doi www.sdewes.org

1413.

Qi, Fengsheng; Wang, Zisong; Li, Baokuan; He, Zhu; Baleta, Jakov; Vujanovic, Milan

Numerical study on characteristics of combustion and pollutant formation in a reheating furnace // Thermal science, 22 (2018), 5; 1-11 doi:10.2298/tsci180118277q (međunarodna recenzija, članak, znanstveni)

doi thermalscience.vinca.rs

1414.

Baleta, Jakov; Qi, Fengsheng; Živić, Marija; Lovrenić-Jugović, Martina

Numerical investigation of the transient spray cooling process for quenching applications // Thermal science, 22 (2018), 5; 1-11 doi:10.2298/tsci180120261b (međunarodna recenzija, članak, znanstveni)

doi thermalscience.vinca.rs

1415.

Lund, Henrik; Alberg Østergaard, Poul; Chang, Miguel; Werner, Sven; Svendsen, Svend; Sorknæs, Peter; Thorsen, Jan Eric; Hvelplund, Frede; Ole Gram Mortensen, Bent; Vad Mathiesenf, Brian et al.

The status of 4th generation district heating: Research and results // Energy (Oxford), 164 (2018), 147-159 doi:10.1016/j.energy.2018.08.206 (međunarodna recenzija, pregledni rad, znanstveni)

doi

1416.

Calise, Francesco; Costa, Mário; Wang, Qiuwang; Zhang, Xiliang; Duić, Neven

Recent Advances in the Analysis of Sustainable Energy Systems // Energies, 11 (2018), 10; 1-30 doi:10.3390/en11102520 (međunarodna recenzija, pregledni rad, znanstveni)

doi www.mdpi.com

1417.

Šumiga, Ivan; Srpak, Dunja; Kondić, Živko

APPLICATION OF THERMOELECTRIC MODULES AS RENEWABLE ENERGY SOURCES // Tehnički glasnik - Technical Journal, 12 (2018), 3; 151-158 doi:.org/10.31803/tg-20180301181527 (međunarodna recenzija, članak, znanstveni)

doi hrcak.srce.hr

1418.

Blecich, Paolo; Senčić, Tomislav; Wolf, Igor; Bonefačić, Igor

NUMERICAL INVESTIGATION OF HEAT AND MASS TRANSFER INSIDE A WET COOLING TOWER // Tehnički glasnik, 12 (2018), 3; 131-138 doi:10.31803/tg-20171017145907 (recenziran, članak, znanstveni)

Pristup cjelovitom tekstu rada doi hrcak.srce.hr

1419.

Mrzljak, Vedran

LOW POWER STEAM TURBINE ENERGY EFFICIENCY AND LOSSES DURING THE DEVELOPED POWER VARIATION // Tehnički glasnik - Technical Journal, 12 (2018), 3; 174-180 doi:10.31803/tg-20180201002943 (međunarodna recenzija, prethodno priopćenje, znanstveni)

Pristup cjelovitom tekstu rada doi hrcak.srce.hr hrcak.srce.hr

1420.

Wang, Jin; Ke, Tian; Zhang, Kai; Baleta, Jakov; Sundén, Bengt

Effect of spherical blockage configurations on film cooling // Thermal science, 22 (2018), 5; 1111, 10 doi:10.2298/tsci171229257w (međunarodna recenzija, članak, znanstveni)

doi www.doiserbia.nb.rs

1421.

Zhu, Yiming; Tan, Houzhang; Niu, Yanqing; Wang, Yibin; Mikulčić, Hrvoje; Vujanović, Milan; Duić, Neven

Modelling study on the effect of ash fusion characteristics on the biomass slagging behavior // Thermal science, 22 (2018), 5; 2113-2121 doi:10.2298/tsci171229268z (međunarodna recenzija, članak, znanstveni)

doi www.doiserbia.nb.rs

1422.

Tian, Ke; Wang, Jin; Liu, Chao; Baleta, Jakov; Yang, Li-Chen; Sunden Bengt

Effect of combined hole configuration on film cooling with and without mist injection // Thermal science, 22 (2018), 5; 1-10 doi:10.2298/TSCI171228266T (međunarodna recenzija, članak, znanstveni)

doi thermalscience.vinca.rs

1423.

Kasać, Josip; Majetić, Dubravko; Brezak, Danko

An algebraic approach to on-line signal denoising and derivatives estimation // Journal of the franklin institute-engineering and applied mathematics, 355 (2018), 15; 7799-7825 doi:10.1016/j.jfranklin.2018.08.016 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada doi www.sciencedirect.com doi.org

1424.

Obrovac, Karlo; Raos, Pero; Galeta, Tomislav; Nižetić, Josip; Mutka, Alan; Vuković Obrovac, Jadranka; Vrhovski, Zoran

A New Approach to the Design of a CNC Machine for Making Orthotic Moulds // Tehnički vjesnik, 25 (2018), Supplement 2; 460-465 doi:10.17559/TV-20180511191214 (međunarodna recenzija, članak, znanstveni)

doi hrcak.srce.hr hrcak.srce.hr

1425.

Seleš, Karlo; Lesičar, Tomislav; Tonković, Zdenko; Sorić, Jurica

A Phase Field Staggered Algorithm for Fracture Modeling in Heterogeneous Microstructure // Key Engineering Materials, 774 (2018), 632-637 doi:10.4028/www.scientific.net/kem.774.632 (međunarodna recenzija, članak, znanstveni)

doi www.scientific.net

1426.

Hegedić, Miro; Gudlin, Mihael; Štefanić, Nedeljko

Relationship between lean and green management in Croatian manufacturing companies // Interdisciplinary description of complex systems, 16 (2018), 1; 21-39 doi:10.7906/indecs.16.1.2 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada doi indecs.eu hrcak.srce.hr

1427.

Tomić, Tihomir; Schneider, Daniel Rolph

The role of energy from waste in circular economy and closing the loop concept – Energy analysis approach // Renewable & sustainable energy reviews, 98 (2018), 268-287 doi:10.1016/j.rser.2018.09.029 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com doi.org

1428.

Rešetar, Marko; Pejić, Goran; Lulić, Zoran

Changes and trends in the Croatian road vehicle fleet – Need for change of policy measures // Transport policy, 71 (2018), 92-105 doi:10.1016/j.tranpol.2018.08.005 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

1429.

Novaković, Branko

Quantum Gravity in Relativistic Alpha Field Theory (QG in RAFT) // International Journal of New Technology and Research (IJNTR), 4 (2018), 6; 46-51 doi:10.31871/IJNTR.4.6.4 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada doi doi.org www.researchgate.net

1430.

Lindič, Maja; Podlipec, Boštjan; Bušić, Matija; Klobčar, Damjan

Toplotna obdelava maraging jekla, navarjenega s postopkom oblikovnega obločnega navarjanja z žico // Ventil, 24 (2018), 4; 302-307 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada

1431.

Vukelić, Đorđe; Šimunović, Goran; Šarić, Tomislav; Matin, Ivan; Savkovic, Borislav; Lazarevic, Milovan; Tadic, Branko

COMPUTER-AIDED DESIGN AND OPTIMIZATION OF FIXTURES FOR PLASTIC PARTS MACHINING // Journal of Production Engineering, 21 (2018), 1; 49-54 doi:10.24867/JPE-2018-01-049 (međunarodna recenzija, članak, znanstveni)

doi www.jpe.ftn.uns.ac.rs

1432.

Hegedić, Miro; Štefanić, Nedeljko; Nikšić, Mladen

Assessing the Environmental Impact of the Self- propelled Bulk Carriage through LCA // Promet - Traffic & Transportation, 30 (2018), 3; 257-266 doi:10.7307/ptt.v30i3.2445 (međunarodna recenzija, članak, znanstveni)

doi traffic.fpz.hr

1433.

Šotola, Dubravko; Ivandić, Željko; Grgić, Ivan

Generating different constructional solutions on the hubless wheel example // IOP conference series. Materials science and engineering, 393 (2018), 1; 1-8 doi:10.1088/1757-899X/393/1/012124 (međunarodna recenzija, članak, znanstveni)

doi iopscience.iop.org

1434.

Pfeifer, Antun; Dobravec, Viktorija; Pavlinek, Luka; Krajačić, Goran; Duić, Neven

Integration of renewable energy and demand response technologies in interconnected energy systems // Energy (Oxford), 161 (2018), 15; 447-455 doi:10.1016/j.energy.2018.07.134 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

1435.

Aleksandrov Fabijanic, Tamara; Katic, Marko; Menelao, Febo

Metrological characteristics of newly developed reference Vickers hardness block for the high hardness range // Metrologia, 55 (2018), 5; - doi:10.1088/1681-7575/aadd78 (međunarodna recenzija, članak, znanstveni)

doi iopscience.iop.org

1436.

Ančić, Ivica; Vladimir, Nikola; Cho, Dae Seung

Determining environmental pollution from ships using Index of Energy Efficiency and Environmental Eligibility (I4E) // Marine policy, 95 (2018), 1-7 doi:10.1016/j.marpol.2018.06.019 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

1437.

Štimac Rončević, Goranka; Rončević, Branimir; Skoblar, Ante; Braut, Sanjin

A Comparative Evaluation of Some Solution Methods in Free Vibration Analysis of Elastically Supported Beams // Zbornik Veleučilišta u Rijeci / Journal of the Polytechnic of Rijeka, 6 (2018), 1; 285-298 (recenziran, članak, znanstveni)

1438.

Alar, Željko; Mandić, Davor

Comparasion of Impact and Tensile Properties of High-Strength Steel // Metals, 8 (2018), 511; 1-7 doi:10.3390/met8070511 (međunarodna recenzija, članak, znanstveni)

doi www.mdpi.com

1439.

Majdandžić, Ljubomir; Buljić, Dalibor; Buljac, Andrija; Kozmar, Hrvoje

Aerodynamic design of a solar road vehicle // International journal of automotive technology, 19 (2018), 6; 949-957 doi:10.1007/s12239−018−0092−2 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada doi ijat.ksae.org

1440.

Araújo, M.S.B.; Fernandes, C.; Ferrás, L.L.; Tuković, Ž.; Jasak, H.; Nóbrega, J.M.

A stable numerical implementation of integral viscoelastic models in the OpenFOAM ® computational library // Computers & Fluids, 172 (2018), 728-740 doi:10.1016/j.compfluid.2018.01.004 (međunarodna recenzija, članak, znanstveni)

doi

1441.

Šuligoj, Filip; Jerbić, Bojan; Šekoranja, Bojan; Vidaković, Josip; Švaco, Marko

Influence of the Localization Strategy on the Accuracy of a Neurosurgical Robot System // Transactions of FAMENA, 42 (2018), 2; 27-38 doi:10.21278/tof.42203 (međunarodna recenzija, članak, znanstveni)

doi hrcak.srce.hr

1442.

Hadžić, Neven

Analytical solution of the serial Bernoulli production line steady-state performance and its application in the shipbuilding process // International journal of production research, 56 (2018), 12; 1, 14 doi:10.1080/00207543.2018.1500042 (međunarodna recenzija, članak, znanstveni)

doi

1443.

Delač, Boris; Pavković, Branimir; Lenić, Kristian

Design, monitoring and dynamic model development of a solar heating and cooling system // Applied thermal engineering, 142 (2018), 489-501 doi:10.1016/j.applthermaleng.2018.07.052 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

1444.

Esih, Ivan; Stojanović, Ivan; Šimunović, Vinko; Alar, Vesna

Korozija pocinčanih cijevi izloženih vodi // Zavarivanje, 61 (2018), 1/2; 15-19 (domaća recenzija, prethodno priopćenje, znanstveni)

1445.

Banduka, N.; Tadić, D.; Mačužić, I.; Crnjac, Marina

Extended process failure mode and effect analysis (PFMEA) for the automotive industry: The FSQC‐PFMEA // Advances in production engineering & management, Volume 13 (2018), No. 2; 206-215 doi:10.14743/apem2018.2.285 (međunarodna recenzija, članak, znanstveni)

doi apem-journal.org

1446.

Li, Qianqian; Wang, Jin; Wang, Jiansheng; Baleta, Jakov; Min, Chunhua; Sundén, Bengt

Effects of gravity and variable thermal properties on nanofluid convective heat transfer using connected and unconnected walls // Energy conversion and management, 171 (2018), 1440-1448 doi:10.1016/j.enconman.2018.06.097 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

1447.

Wang, Fei; Li, Kangping; Duić, Neven; Mi, Zegqiang; Hodge, Bri-Mathias, Shafie-khak, Miadreza; Catalão, Joãoa

Association rule mining based quantitative analysis approach of household characteristics impacts on residential electricity consumption patterns // Energy conversion and management, 171 (2018), 839-854 doi:10.1016/j.enconman.2018.06.017 (međunarodna recenzija, članak, znanstveni)

doi

1448.

Vučković, Krešimir; Galić, Ivica; Božić, Željko; Glodež, Srečko

Effect of friction in a single-tooth fatigue test // International journal of fatigue, 114 (2018), 148-158 doi:10.1016/j.ijfatigue.2018.05.005 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

1449.

Božić, Željko; Schmauder, Siegfried; Wolf, Hinko

The effect of residual stresses on fatigue crack propagation in welded stiffened panels // Engineering failure analysis, 84 (2018), 346-357 doi:10.1016/j.engfailanal.2017.09.001 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

1450.

Mlikota, Marijo; Schmauder, Siegfried; Božić, Željko

Calculation of the Wöhler (S-N) curve using a two-scale model // International journal of fatigue, 114 (2018), 289-297 doi:10.1016/j.ijfatigue.2018.03.018 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

1451.

Jurjević, Mate; Koboević, Nikša; Bošnjaković, Mladen

Modelling the Stages of Turbocharger Dynamic Reliability by Application of Exploitation Experience // Tehnički vjesnik, 25 (2018), 3; 792-797 doi:10.17559/TV-20171031075126 (međunarodna recenzija, članak, znanstveni)

doi hrcak.srce.hr doi.org hrcak.srce.hr

1452.

Piazzullo, Daniele; Costa, Michela; Petranović, Zvonimir; Vujanović, Milan; La Villetta, Maurizio; Caputo, Carmine; Cirillo, Domenico

CFD Modelling of a Spark Ignition Internal Combustion Engine Fuelled with Syngas for a mCHP System // Chemical engineering transactions, 65 (2018), 13-18 doi:10.3303/CET1865003 (međunarodna recenzija, članak, znanstveni)

doi www.aidic.it www.aidic.it

1453.

Dunđer, Marko; Samardžić Ivan; Ćorić Anto; Salopek Goran

Effects of real welding parameters of high- strength S1100QL steel on hardness and impact energy properties // Metalurgija, 57 (2018), 4; 242-244 (međunarodna recenzija, članak, znanstveni)

1454.

Katulić, Stjepko; Čehil, Mislav; Schneider, Daniel Rolph

Exergoeconomic optimization of a combined cycle power plant’s bottoming cycle using organic working fluids // Energy conversion and management, 171 (2018), 171; 1721-1736 doi:10.1016/j.enconman.2018.06.103 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

1455.

Mrzljak, Vedran; Senčić, Tomislav; Žarković, Božica

Turbogenerator steam turbine variation in developed power: analysis of exergy efficiency and exergy destruction change // Modelling and Simulation in Engineering, 2018 (2018), 2945325, 12 doi:10.1155/2018/2945325 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada doi www.hindawi.com www.hindawi.com

1456.

Babic, Zoran; Veza, Ivica; Balic, Andjela; Crnjac, Marina

Application of De Novo Programming Approach for Optimizing the Business Process // World Academy of Science, Engineering and Technology, International Journal of Industrial and Systems Engineering, 12 (2018), 5; 519-524 doi:urn:dai:10.1999/1307-6892/10008915 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada doi waset.org

1457.

Boral, Piotr; Stoić, Antun; Kljajin, Milan

Machining of Spur Gears Using a Special Milling Cutter // Tehnički vjesnik, 25 (2018), 3; 798-802 doi:10.17559/TV-20171120121636 (međunarodna recenzija, članak, znanstveni)

doi hrcak.srce.hr

1458.

Tadic, Branko; Matejic, Marija; Simunovic, Goran; Kljajin, Milan; Kocovic, Vladimir; Bogdanovic, Bojan; Vukelic, Djordje

Increasing Stiffness of Constructions through Application of Enhancing Elements // Tehnički vjesnik, 25 (2018), 2; 479-485 doi:10.17559/TV-20171229212528 (međunarodna recenzija, članak, znanstveni)

doi hrcak.srce.hr

1459.

Škurić, Vanja; De Jaeger, Peter; Jasak, Hrvoje

Lubricated elastoplastic contact model for metal forming processes in OpenFOAM // Computers & fluids, 172 (2018), 226-240 doi:10.1016/j.compfluid.2018.06.011 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

1460.

Marušić, Vlatko; Milinović, Andrijana; Opačak, Ivan; Putnik, Ivan

Research into possibilities of reducing the X155CrVMo12-1 tool steel fragility // Metalurgija, 57 (2018), 4; 330-332 (međunarodna recenzija, članak, znanstveni)

hrcak.srce.hr

1461.

Mrzljak, Vedran; Prpić-Oršić, Jasna; Poljak, Igor

Energy Power Losses and Efficiency of Low Power Steam Turbine for the Main Feed Water Pump Drive in the Marine Steam Propulsion System // Pomorski zbornik, 54 (2018), 1; 37-51 doi:10.18048/2018.54.03 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada doi hrcak.srce.hr hrcak.srce.hr

1462.

Pivac, Ivan; Bezmalinović, Dario; Barbir, Frano

Catalyst degradation diagnostics of proton exchange membrane fuel cells using electrochemical impedance spectroscopy // International journal of hydrogen energy, 43 (2018), 29; 13512-13520 doi:10.1016/j.ijhydene.2018.05.095 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

1463.

Čatipović, Nikša; Živković, Dražen; Dadić, Zvonimir; Krolo, Jure

Influence of austempering temperature and salt bath agitation on microstructure and mechanical properties of austempered ductile iron // Kovové materiály, 56 (2018), 3; 137-144 doi:10.4149/km_2018_3_137 (međunarodna recenzija, članak, znanstveni)

doi

1464.

Šolić, Tomislav; Marić, Dejan; Duspara, Miroslav; Samardžić, Ivan

Analysis of plated layer’s effects on the structure resistance to corrosion // Metalurgija, 57 (2018), 4; 327-329 (međunarodna recenzija, prethodno priopćenje, znanstveni)

1465.

Boban, Luka; Soldo, Vladimir; Stošić, Jure; Filipović, Eugen; Tremac, Filip

Ground Thermal Response and Recovery after Heat Injection: Experimental Investigation // Transactions of FAMENA, 42 (2018), SI-1; 39-50 doi:10.21278/TOF.42Si104 (međunarodna recenzija, članak, znanstveni)

doi hrcak.srce.hr

1466.

Pavković, Danijel; Sedić, Almir; Katulić, Stjepko

Modeliranje i simuliranje dinamike generatora pare u rafineriji nafte // Naftaplin : znanstveno-stručno glasilo Hrvatske udruge naftnih inženjera i geologa, 38 (2018), 154; 62-78 (domaća recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada www.hunig.hr

1467.

Ulyev, Leonid; Vasiliev, Mikhail; Boldyryev, Stanislav

Process integration of crude oil distillation with technological and economic restrictions // Journal of environmental management, 222 (2018), 454-464 doi:10.1016/j.jenvman.2018.05.062 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada doi www.sciencedirect.com

1468.

Mrzljak, Vedran; Prpić-Oršić, Jasna; Senčić, Tomislav

Change in Steam Generators Main and Auxiliary Energy Flow Streams During the Load Increase of LNG Carrier Steam Propulsion System // Pomorstvo : journal of maritime studies, 32 (2018), 1; 121-131 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada hrcak.srce.hr hrcak.srce.hr

1469.

Ruggiero, Alessandro; D’Amato, Roberto; Magliano, Emanuele; Kozak, Drazan

Dynamical simulations of a flexible rotor in cylindrical uncavitated and cavitated lubricated journal bearings // Lubricant, 2018 (2018), 6 (2); 40, 29 doi:10.3390/lubricants6020040 (međunarodna recenzija, članak, znanstveni)

doi www.mdpi.com doi.org

1470.

Ančić, Ivica; Vladimir, Nikola; Runko Luttenberger, Lidija

Energy efficiency of ro-ro passenger ships with integrated power systems // Ocean engineering, 166 (2018), 350-357 doi:10.1016/j.oceaneng.2018.05.042 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

1471.

Liu, Xing; Tan, Houzhang; Wang, Yibin; Yang, Fuxin; Mikulčić, Hrvoje; Vujanović, Milan; Duić, Neven

Low NOx combustion and SCR flow field optimization in a low volatile coal fired boiler // Journal of environmental management, 220 (2018), 30-35 doi:10.1016/j.jenvman.2018.05.009 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

1472.

Jokić, Stela; Aladić, Krunoslav; Šubarić, Drago

Subcritical water extraction laboratory plant design and application // Annual of the Croatian Academy of Engineering, 2018 (2018), 21; 247-258 (recenziran, pregledni rad, stručni)

hrcak.srce.hr hrcak.srce.hr

1473.

Urbaniec, Krzysztof; Mikulčić, Hrvoje; Wang, Yutao; Duić, Neven

System integration is a necessity for sustainable development // Journal of cleaner production, 195 (2018), 122-132 doi:10.1016/j.jclepro.2018.05.178 (međunarodna recenzija, pregledni rad, znanstveni)

doi www.sciencedirect.com

1474.

Merlone, Andrea; Sanna, Francesca; Beges, Gaber; Bell, Stephanie; Beltramino, Giulio; Bojkovski, Jovan; Brunet, Manola; Del Campo, Dolores; Castrillo, Antonio; Chiodo, Nicola et al.

The MeteoMet2 project—highlights and results // Measurement science & technology, 29 (2018), 2; 025802, 27 doi:10.1088/1361-6501/aa99fc (međunarodna recenzija, članak, znanstveni)

doi iopscience.iop.org

1475.

Šestan, Danijel; Zvizdić, Davor; Šariri, Kristina

New Submersed Chamber for Calibration of Relative Humidity Instruments at HMI/FSB-LPM // International journal of thermophysics, 39 (2018), 2; 27, 8 doi:10.1007/s10765-017-2348-x (međunarodna recenzija, članak, znanstveni)

doi link.springer.com

1476.

Klaic, Miho; Murat, Zrinka; Staroveski, Tomislav; Brezak, Danko

Tool wear monitoring in rock drilling applications using vibration signals // Wear, 409 (2018), 222-227 doi:10.1016/j.wear.2018.05.012 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

1477.

Šolić, Sanja; Podgornik, Bojan; Leskovšek, Vojteh

The occurrence of quenching cracks in high- carbon tool steel depending on the austenitizing temperature // Engineering failure analysis, 92 (2018), 140-148 doi:10.1016/j.engfailanal.2018.05.008 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

1478.

Petranović, Zvonimir; Sjerić, Momir; Taritaš, Ivan; Vujanović, Milan; Kozarac, Darko

Study of Advanced Engine Operating Strategies on a Turbocharged Diesel Engine by Using Coupled Numerical Approaches // Energy conversion and management, 171 (2018), 1; 1-11 doi:10.1016/j.enconman.2018.05.085 (međunarodna recenzija, članak, znanstveni)

doi

1479.

Špiljar, Željko; Schneider, Daniel Rolph; Drakulić, Miodrag

Analysis of Jet Fan Ventilation System installed in an Underground Car Park with Partition Walls // Journal of sustainable development of energy, water and environment systems, 6 (2018), 2; 228-239 doi:10.13044/j.sdewes.d5.0180 (međunarodna recenzija, članak, znanstveni)

doi

1480.

Ranogajec, Vanja; Ivanović, Vladimir; Deur, Joško; Tseng, H. Eric

Optimization-based assessment of automatic transmission double-transition shift controls // Control engineering practice, 76 (2018), 155-166 doi:10.1016/j.conengprac.2018.04.016 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

1481.

Brnić, Josip; Brčić, Marino; Kršćanski, Sanjin; Lanc, Domagoj; Niu, Jitai; Wang, Peng

Steel 51CrV4 under high temperatures, short- time creep and high cycle fatigue // Journal of constructional steel research, 147 (2018), 468-476 doi:10.1016/j.jcsr.2018.05.008 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

1482.

Horvat, Ivan; Dović, Damir

Combustion of Agricultural Biomass - Issues and Solutions // Transactions of FAMENA, 42 (2018), SI-1; 75-86 doi:10.21278/TOF.42Si107 (međunarodna recenzija, članak, znanstveni)

doi hrcak.srce.hr

1483.

Dominković, D.F.; Dobravec, Viktorija; Jiang, Y.; Nielsen, P.S.; Krajačić, Goran

Modelling smart energy systems in tropical regions // Energy (Oxford), 155 (2018), 15; 592-609 doi:10.1016/j.energy.2018.05.007 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

1484.

Šafran, Branimir; Jug, Matija; Radmanović, Kristijan; Hasan, Marijan; Augustinović, Kristijan; Vučković, Krešimir; Risović, Stjepan

Doprinos istraživanju svojstava peleta od drva turopoljskog kraja // Šumarski list : znanstveno-stručno i staleško glasilo Hrvatskoga šumarskog društva, 142 (2018), 3-4; 149-158 doi:10.31298/sl.142.3-4.3 (podatak o recenziji nije dostupan, članak, znanstveni)

doi www.sumari.hr hrcak.srce.hr

1485.

Rauch, Martina; Galović, Antun; Ferdelji, Nenad; Mudrinić, Saša

Local Entropy Production of the Parallel Flow and Counterflow Heat Exchanger // Transactions of FAMENA, 42 (2018), SI-1; 13-25 doi:10.21278/TOF.42Si102 (međunarodna recenzija, članak, znanstveni)

doi hrcak.srce.hr

1486.

Čatipović, Nikša; Živković, Dražen; Dadić, Zvonimir

The Effects of Molybdenum and Manganese on the Mechanical Properties of Austempered Ductile Iron // Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 25 (2018), 2; 635-642 doi:10.17559/TV-20170124120729 (međunarodna recenzija, pregledni rad, znanstveni)

doi

1487.

Holik, Mario; Živić, Marija; Virag, Zdravko; Barac, Antun

Comparison of finned tube and plate-finned heat exchangers in waste heat recovery // Transactions of FAMENA, 42 (2018), SI-1; 1-12 doi:10.21278/TOF.42Si101 (međunarodna recenzija, članak, znanstveni)

doi hrcak.srce.hr

1488.

Rauter, M.; Tuković, Željko

A finite area scheme for shallow granular flows on three-dimensional surfaces // Computers & fluids, 166 (2018), 184-199 doi:10.1016/j.compfluid.2018.02.017 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

1489.

Tuković, Željko; Perić, Milovan; Jasak, Hrvoje

Consistent second-order time-accurate non-iterative PISO-algorithm // Computers & fluids, 166 (2018), 78-85 doi:10.1016/j.compfluid.2018.01.041 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

1490.

Doračić, Borna; Novosel, Tomislav; Pukšec, Tomislav; Duić, Neven

Evaluation of Excess Heat Utilization in District Heating Systems by Implementing Levelized Cost of Excess Heat // Energies, 11 (2018), 3; 575, 14 doi:10.3390/en11030575 (međunarodna recenzija, članak, znanstveni)

doi www.mdpi.com

1491.

Špelić, Ivana; Rogale, Dubravko; Mihelić - Bogdanić, Alka

The laboratory investigation of the clothing microclimatic layers in accordance with the volume quantification and qualification // The Journal of the Textile Institute, 110 (2018), 1; 26-36 doi:10.1080/00405000.2018.1462087 (međunarodna recenzija, članak, znanstveni)

doi www.tandfonline.com

1492.

Senjanović, Ivo; Alujević, Neven; Ćatipović, Ivan; Čakmak, Damjan; Vladimir, Nikola

Vibration analysis of rotating toroidal shell by the Rayleigh-Ritz method and Fourier series // Engineering structures, 173 (2018), 870-891 doi:10.1016/j.engstruct.2018.07.029 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada doi www.fsb.unizg.hr authors.elsevier.com

1493.

Stazić, Ladislav; Komar, Ivan; Mihanović, Luka; Mišura, Antonija

Shipowner’s Impact on Planned Maintenance System Database Quality Grades Resemblance Equalization // Transactions on maritime science, 7 (2018), 1; 5-22 doi:10.7225/toms.v07.n01.001 (međunarodna recenzija, prethodno priopćenje, znanstveni)

doi

1494.

Miler, Daniel; Žeželj, Dragan; Lončar, Antonio; Vučković, Krešimir

Multi-objective spur gear pair optimization focused on volume and efficiency // Mechanism and machine theory, 125 (2018), July; 185-195 doi:10.1016/j.mechmachtheory.2018.03.012 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

1495.

Deng, Shuanghui; Wang, Xuebin; Zhang, Jiaye; Liu, Zihan; Mikulčić, Hrvoje; Vujanović, Milan; Tan, Houzhang; Duić, Neven

A kinetic study on the catalysis of KCl, K2SO4, and K2CO3 during oxy-biomass combustion // Journal of environmental management, 218 (2018), 50-58 doi:10.1016/j.jenvman.2018.04.057 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

1496.

Šomođi, Željko; Zdraveva, Emilija

On a relationship between normal-shear coefficients and tensile moduli in anisotropic materials // Transactions of FAMENA, 42 (2018), 1; 51-60 doi:10.21278/TOF.42105 (međunarodna recenzija, članak, znanstveni)

doi hrcak.srce.hr

1497.

Müslüm, Arici; Feyza, Bilgin; Nižetić, Sandro; Papadopoulos, Agis

Phase change material based cooling of photovoltaic panel: A simplified numerical model for the optimization of the phase change material layer and general economic evaluation // Journal of cleaner production, 189 (2018), 738-745 doi:10.1016/j.jclepro.2018.04.057 (međunarodna recenzija, članak, znanstveni)

doi

1498.

Gatin, Inno; Cvijetić, Gregor; Vukcevic, Vuko; Jasak, Hrvoje; Malenica, Šime

Harmonic Balance method for nonlinear and viscous free surface flows // Ocean engineering, 157 (2018), 164-179 doi:10.1016/j.oceaneng.2018.03.050 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada doi www.sciencedirect.com

1499.

Botak, Zlatko; Pisačić, Katarina; Horvat, Marko; Mađerić, Damir

The influence of drill point geometry on tool life // Tehnički glasnik, 12 (2018), 1; 1-4 (recenziran, članak, znanstveni)

hrcak.srce.hr

1500.

Barkaoui, A. E.; Duić, Neven; Krajačić, Goran

Geothermal energy into District Heating Systems in Zagreb, Croatia // Journal of Materials and Environmental Sciences, 9 (2018), 5; 1411-1417 doi:10.26872/jmes.2018.9.5.154 (međunarodna recenzija, članak, znanstveni)

doi www.jmaterenvironsci.com

1501.

Krajačić, Goran; Vujanović, Milan; Duić, Neven; Kılkış, Şiir; Rosen, Marc A.; Al-Nimd, Moh'd Ahmad,

Integrated approach for sustainable development of energy, water and environment systems // Energy conversion and management, 159 (2018), 398-412 doi:10.1016/j.enconman.2017.12.016 (međunarodna recenzija, članak, znanstveni)

doi

1502.

Bešenić, Tibor; Mikulčić, Hrvoje; Vujanović, Milan; Duić, Neven

Numerical modelling of emissions of nitrogen oxides in solid fuel combustion // Journal of Environmental Management, 215 (2018), 177-184 doi:10.1016/j.jenvman.2018.03.014 (međunarodna recenzija, članak, znanstveni)

doi

1503.

Keran, Zdenka; Kondić, Živko; Piljek, Petar; Runje, Biserka

Accuracy of Model Force Prediction in Closed Die Coining Process // Strojniški vestnik, 64 (2018), 4; 225-232 doi:10.5545/sv-jme.2017.5103 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada doi

1504.

Marohnić, Tea; Basan, Robert

Estimation of cyclic behavior of unalloyed, low‐ alloy and high‐alloy steels based on relevant monotonic properties using artificial neural networks // Materialwissenschaft und Werkstofftechnik, 49 (2018), 3; 368-380 doi:10.1002/mawe.201700192 (međunarodna recenzija, članak, znanstveni)

doi onlinelibrary.wiley.com

1505.

Srivastava, Madhulika; Hloch, Sergej; Tripathi, Rupam; Kozak, Drazan; Chattopadhyaya, Somnath; Dixit, Amit Rai; Foldyna, Josef; Hvizdos, Pavol; Fides, Martin; Adamcik, Pavel

Ultrasonically generated pulsed water jet peening of austenitic stainless-steel surfaces // Journal of Manufacturing Processes, 32 (2018), 455-468 doi:10.1016/j.jmapro.2018.03.016 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

1506.

Wang, Xuebin; Jin, Qiming; Zhang, Jiaye; Li, Yan; Li, Shuaishuai; Mikulčić, Hrvoje; Vujanović, Milan; Tan, Houzhang; Duić, Neven.

Soot formation during polyurethane (PU) plastic pyrolysis: The effects of temperature and volatile residence time // Energy conversion and management, 164 (2018), 353-362 doi:10.1016/j.enconman.2018.02.082 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

1507.

Ćurković, Milan; Ćurković, Andrijana; Vučina, Damir

Novel re-parameterization for shape optimization and comparison with knot-based gradient fitting method // Computer methods in applied mechanics and engineering, 336 (2018), 304-332 doi:10.1016/j.cma.2018.03.018 (međunarodna recenzija, članak, znanstveni)

doi

1508.

Sremec, Mario; Božić, Mladen; Vučetić, Ante; Kozarac, Darko

Influence of High Compression Ratio and Excess Air Ratio on Performance and Emissions of Natural Gas Fuelled SI Engine // Thermal science, 22 (2018), 5; 931681, 13 doi:10.2298/TSCI171222219S (međunarodna recenzija, članak, znanstveni)

doi thermalscience.vinca.rs

1509.

Vučetić, Ante; Božić, Mladen; Kozarac, Darko; Lulić, Zoran

Characterisation of the Combustion Process In the Spark Ignition and HCCI Engine // Thermal science, 22 (2018), 5; 1-13 doi:10.2298/TSCI171230263V (međunarodna recenzija, članak, znanstveni)

doi

1510.

Božić, Mladen; Vučetić, Ante; Sjerić, Momir; Kozarac, Darko; Lulić, Zoran

Experimental Study on Knock Sources in Spark Ignition Engine with Exhaust Gas Recirculation // Energy conversion and management, 165 (2018), 1; 35-44 doi:10.1016/j.enconman.2018.03.053 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

1511.

Opačak, Ivan; Marić, Alen; Dašić, Predrag; Marušić, Vlatko

The laboratory testing of steel 20MnCr5 // International journal for science, technics and innovations for the industry "MACHINЕS. TECHNOLОGIES. MATERIALS", 12 (2018), 3; 132-135 (međunarodna recenzija, članak, znanstveni)

stumejournals.com

1512.

Beno, Pavel; Krilek, Jozef; Kovač, Jan; Kozak, Dražan; Fragassa, Cristiano

The Analysis of the New Conception Transportation Cableway System Based on the Tractor Equipment // FME Transactions, 46 (2018), 1; 17-22 doi:10.5937/fmet1801017B (međunarodna recenzija, članak, znanstveni)

doi www.mas.bg.ac.rs

1513.

Eder, Lucas; Ban, Marko; Pirker, Gerhard; Vujanović, Milan; Priesching, Peter; Wimmer, Andreas

Development and Validation of 3D-CFD Injection and Combustion Models for Dual Fuel Combustion in Diesel Ignited Large Gas Engines // Energies, 11 (2018), 3; 643, 23 doi:10.3390/en11030643 (međunarodna recenzija, članak, znanstveni)

doi www.mdpi.com

1514.

Duarte, Isabel; Vesenjak, Matej; Krstulović-Opara, Lovre; Ren, Zoran

Crush performance of multifunctional hybrid foams based on an aluminium alloy open-cell foam skeleton // Polymer testing, 67 (2018), 246-256 doi:10.1016/j.polymertesting.2018.03.009 (međunarodna recenzija, članak, znanstveni)

doi

1515.

Mrzljak, Vedran; Poljak, Igor; Žarković, Božica

Exergy Analysis of Steam Pressure Reduction Valve in Marine Propulsion Plant on Conventional LNG Carrier // Naše more : znanstveni časopis za more i pomorstvo, 65 (2018), 1; 24-31 doi:10.17818/NM/2018/1.4 (međunarodna recenzija, prethodno priopćenje, znanstveni)

Pristup cjelovitom tekstu rada doi hrcak.srce.hr hrcak.srce.hr

1516.

Stojanović, Ivan; Šimunović, Vinko; Alar, Vesna; Kapor, Frankica

Experimental Evaluation of Polyester and Epoxy– Polyester Powder Coatings in Aggressive Media // Coatings, 8 (2018), 98; 1-12 doi:10.3390/coatings8030098 (međunarodna recenzija, članak, znanstveni)

doi www.mdpi.com

1517.

Krznar, Matija; Kotarski, Denis; Piljek, Petar; Pavković, Danijel

On-line inertia measurement of unmanned aerial vehicles using on-board sensors and a bifilar pendulum // Interdisciplinary description of complex systems, 16 (2018), 1; 149-161 doi:10.7906/indecs.16.1.12 (međunarodna recenzija, članak, znanstveni)

doi hrcak.srce.hr indecs.eu

1518.

Uroić, Tessa; Jasak, Hrvoje

Block-selective algebraic multigrid for implicitly coupled pressure-velocity system // Computers & fluids, 167 (2018), 1; 100-110 doi:10.1016/j.compfluid.2018.02.034 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

1519.

Sjerić, Momir; Kozarac, Darko; Schuemie, Henrik; Tatschl, Reinhard

A New Quasi-Dimensional Flame Tracking Combustion Model for Spark Ignition Engines // Energy conversion and management, 165 (2018), 1; 263-275 doi:10.1016/j.enconman.2018.03.008 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

1520.

Vladimir, Nikola; Ančić, Ivica; Šestan, Ante

Effect of ship size on EEDI requirements for large container ships // Journal of marine science and technology, 23 (2018), 1; 42-51 doi:10.1007/s00773-017-0453-y (međunarodna recenzija, članak, znanstveni)

doi

1521.

Pavković, Danijel; Cipek, Mihael; Hrgetić, Mario; Sedić, Almir

Modeling, Parameterization and Damping Optimum-based Control System Design for an Airborne Wind Energy Ground Station Power Plant // Energy conversion and management, 164 (2018), C; 262-276 (međunarodna recenzija, članak, znanstveni)

1522.

Glodež, Srečko; Šori, Marko; Vučković, Krešimir; Risović, Stjepan

Determination of Service Life of Sintered Powder Metallurgy Gears in Regard to Tooth Bending Fatigue // Croatian journal of forest engineering, 39 (2018), 1; 129-137 (podatak o recenziji nije dostupan, članak, znanstveni)

www.crojfe.hr

1523.

Turkalj, Goran; Lanc, Domagoj; Banić, Damjan; Brnić, Josip; Vo, Thuc P.

A shear-deformable beam model for stability analysis of orthotropic composite semi-rigid frames // Composite structures, 189 (2018), 648-660 doi:10.1016/j.compstruct.2018.01.105 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

1524.

Užarević, Krunoslav; Ferdelji, Nenad; Mrla, Tomislav; Julien, Patrick A.; Halasz, Boris; Friščić, Tomislav; Halasz, Ivan

Enthalpy vs. friction: heat flow modelling of unexpected temperature profiles in mechanochemistry of metal–organic frameworks // Chemical Science, 9 (2018), 2525-2532 doi:10.1039/c7sc05312f (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada doi pubs.rsc.org pubs.rsc.org fulir.irb.hr

1525.

Matulić, Nikola; Radica, Gojmir; Nižetić, Sandro

Thermodynamic analysis of active modular internal combustion engine concept: targeting efficiency increase and carbon dioxide emissions reduction of gasoline engines // International journal of energy research, SI (2018), 1-13 doi:10.1002/er.4055 (međunarodna recenzija, članak, znanstveni)

doi

1526.

Belić, Damir; Kunica, Zoran; Opetuk, Tihomir; Đukic, Goran

Optimization of the Plant Layout in the Production of the Special Transformers - Case Study // FME Transactions, 46 (2018), 2; 285-290 doi:10.5937/fmet1802285B (međunarodna recenzija, članak, znanstveni)

doi www.mas.bg.ac.rs scindeks.ceon.rs

1527.

Anđelić, Nikola; Braut, Sanjin; Pavlović, Ana

Variation of natural frequencies by circular saw blade rotation // Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 25 (2018), 1; 10-17 doi:10.17559/TV-20160210110559 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada doi hrcak.srce.hr

1528.

Buzjak, Domagoj; Kunica, Zoran

Towards immersive designing of production processes using virtual reality techniques // Interdisciplinary description of complex systems, 16 (2018), 1; 110-123 doi:10.7906/indecs.16.1.8 (recenziran, članak, znanstveni)

Pristup cjelovitom tekstu rada doi hrcak.srce.hr indecs.eu

1529.

Gonzalez-Gutierrez, Joamin; Godec, Damir; Guráň, Radoslav; Spoerk, Martin; Kukla, Christian; Holzer, Clemens

3D printing conditions determination for feedstock used in fused filament fabrication (FFF) of 17-4PH stainless steel parts // Metalurgija, 57 (2018), 1/2; 117-120 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada hrcak.srce.hr

1530.

Pivac, Nikolina; Nižetić, Sandro; Zanki, Vlasta

Occupant behavior and thermal comfort field analysis in typical educational research institution: A case study // Thermal science, 22 (2018), 3; 785-795 doi:10.2298/TSCI170915013P (međunarodna recenzija, članak, znanstveni)

doi

1531.

Lajqi, Naser; Kyçyku, Azem; Lajqi, Shpetim; Đurin, Bojan

Modeling and simulation of heat transfer in turbocharged diesel engines // International Journal of Mechanical Engineering and Technology, 9 (2018), 1; 308-319 doi:https://www.iaeme.com/citearticle.asp?Ed=10239&Jtype=IJMET&VType=9&Itype=1 (međunarodna recenzija, članak, znanstveni)

doi www.iaeme.com

1532.

Lajqi, Naser; Lajqi, Shpetim; Đurin, Bojan

Diagnostic methods of rear drive axle of the passenger cars // International journal of mechanical engineering and technology, 9 (2018), 1; 297-307 (međunarodna recenzija, članak, znanstveni)

iaeme.com

1533.

Uran, Valter; Pavletić, Duško; Doboviček, Sandro

An approach to the capability analysis of a multi- spindle machining centre // Engineering review, 38 (2018), 1; 86-97 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada er.riteh.hr

1534.

Berberović, Edin; Schremb, Markus; Tuković, Željko; Jakirlić, Suad; Tropea, Cameron

Computational modeling of freezing of supercooled water using phase-field front propagation with immersed points // International journal of multiphase flow, 99 (2018), 329-346 doi:10.1016/j.ijmultiphaseflow.2017.11.005 (međunarodna recenzija, članak, znanstveni)

doi doi.org www.sciencedirect.com

1535.

Mihalic Pokopec, Ivana; Mrvar, Primož; Bauer, Branko

Influence of chunky graphite on latent heat // Materiali in tehnologije, 52 (2018), 1; 59-65 (međunarodna recenzija, članak, znanstveni)

1536.

Tan, Houzhang; Waang, Yibin; Cao, Ruijie; Xiong, Yingying; Ruan, Renhui; Vujanović, Milan; Duić, Neven.

Development of wet phase transition agglomerator for multi-pollutant synergistic removal // Applied thermal engineering, 130 (2018), 1208-1214 doi:10.1016/j.applthermaleng.2017.11.112 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com doi.org

1537.

Katulić, Stjepko; Čehil, Mislav; Schneider, Daniel Rolph

Thermodynamic efficiency improvement of combined cycle power plant's bottom cycle based on organic working fluids // Energy (Oxford), 147 (2018), 36-50 doi:10.1016/j.energy.2018.01.033 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com doi.org

1538.

Puškarić, Miroslav; Car, Zlatan; Bulić, Neven

Magnetic Bearing Control System Based on PI and PID Controllers // Tehnički vjesnik, 25 (2018), 1; 136-140 doi:10.17559/TV-20160726112308 (domaća recenzija, članak, znanstveni)

doi hrcak.srce.hr doi.org

1539.

Pavlović, Darko; Banovac, Eraldo; Vištica, Nikola

Defining a composite index for measuring natural gas supply security - The Croatian gas market case // Energy policy, 114 (2018), 30-38 doi:10.1016/j.enpol.2017.11.029 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com doi.org

1540.

Dominković, Dominik Franjo; Bačeković, Ivan; Pedersen, Allan Schrøder; Krajačić, Goran

The future of transportation in sustainable energy systems: Opportunities and barriers in a clean energy transition // Renewable & sustainable energy reviews, 82 (2018), 1823-1838 doi:10.1016/j.rser.2017.06.117 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

1541.

Kozina, Ante; Radica, Gojmir; Nižetić, Sandro

Increasing engine efficiency at part load with the exhaust valve control: A simplified modelling approach // International journal of exergy, 26 (2018), 1/2; 131-152 doi:10.1504/IJEX.2018.092510 (međunarodna recenzija, članak, znanstveni)

doi www.inderscience.com

1542.

Alujević, Neven; Čakmak, Damjan; Wolf, Hinko; Jokić, Marko

Passive and active vibration isolation systems using inerter // Journal of sound and vibration, 418 (2018), 163-183 doi:10.1016/j.jsv.2017.12.031 (međunarodna recenzija, članak, znanstveni)

doi app.box.com www.fsb.unizg.hr doi.org www.sciencedirect.com

1543.

Ančić, Ivica; Theotokatos, Gerasimos; Vladimir, Nikola

Towards improving energy efficiency regulations of bulk carriers // Ocean engineering, 148 (2018), 193-201 doi:10.1016/j.oceaneng.2017.11.014 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

1544.

Gatin, Inno; Vukčević, Vuko; Jasak, Hrvoje; Seo, Jeonghwa; Hyung Rhee, Shin

CFD verification and validation of green sea loads // Ocean engineering, 148 (2018), 500-515 doi:10.1016/j.oceaneng.2017.10.026 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada doi www.sciencedirect.com

1545.

Cumin, Josip; Samardžić, Ivan; Dunđer, Marko

Mechanical clinching process stress and strain in the clinching of EN-AW5754 (AlMg3), and EN AW-5019 (AlMg5) metal plates // Metalurgija, 57 (2018), 1-2; 107-110 (međunarodna recenzija, članak, znanstveni)

1546.

Režek Jambrak, Anet; Šimunek, Marina; Evačić, Silva; Markov, Ksenija; Smoljanić, Goran; Frece, Jadranka

Influence of high power ultrasound on selected moulds, yeasts and Alicyclobacillus acidoterrestris in apple, cranberry and blueberry juice and nectar // Ultrasonics, 83 (2018), 3-17 doi:10.1016/j.ultras.2017.02.011 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

1547.

Janković, Zvonimir; Sierea Atienza, Jaime; Cerdeira Perez, Fernando; Pavković, Branimir

Analysis of the impact of different operating conditions on the performance of a reversible heat pump with domestic hot water production // International journal of refrigeration, 86 (2018), 282-291 doi:10.1016/j.ijrefrig.2017.11.005 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com doi.org

Pregled po znanstvenom području: Strojarstvo (MB: 2.11)

Radovi u časopisima

Znanstveni i pregledni radovi