Pregled po znanstvenom području: Metalurgija (MB: 2.08)
Pronađeno 4134 radova
-
776.Šolić, Sanja; Schauperl, Zdravko; Ćatić, Amir; Tropša, VladoPrimjena aditivnih tehnologija u izradi CoCr dentalnih fiksno-protetskih konstrukcija // Conference proceedings 20th International Conference on Materials MATRIB 2019 / Šolić, Sanja ; Schauperl, Zdravko ; Pugar, Daniel (ur.).
Zagreb: Hrvatsko društvo za materijale i tribologiju (HDMT), 2019. str. 287-294 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
777.Bogeljić, IvanMikrostrukturna karakterizacija Cu-Al-Mn-Zn legure, 2019., diplomski rad, diplomski, Metalurški fakultet, Sisak
-
778.Hršak, Damir; Štrkalj, Anita; Jandrlić, Ivan; Slokar, Ljerka; Glavaš, ZoranLong Term Environmental Threats from Worldwide Industrial Waste // Proceedings of the XIII th International Conference "Preparation of Ceramic Materials" / Plešingerova, Beatrice ; Medved, David (ur.).
Košice: Tehnical university of Košice, Faculty of Materials, Metallurgy and Recycling, 2019. str. 202-203 (poster, međunarodna recenzija, sažetak, znanstveni) -
779.Lazić, Ladislav; Cerinski, Damijan; Baleta, Jakov; Lovrenić-Jugović, MartinaImproving fuel utilisation efficiency by oxygen- enriched air combustion // Proceedings 27th International Conference Ecological Truth and Environmental Research - EcoTER’19 / Šerbula, Snežana (ur.).
Bor, 2019. str. 529-534 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
780.Gojić, Mirko; Ivanić, Ivana; Holjevac Grgurić, Tamara; Kožuh, Stjepan; Beganović, Omer; Ćubela, DijanaMicrostructural properties and dynamic-mechanical behaviour of CuAlMn shape memory alloy // Proceedings 27th International Conference Ecological Truth and Environmental Research / Šerbula, Snežana (ur.).
Borsko jezero: University of Belgrade, Technical Faculty in Bor, 2019. str. 337-342 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
781.Sponsel, Paul; Žmak, Irena; Vukšić, MilanThe characteristics and environmental aspects of magnesium thixomolding versus die casting process // Proceedings book - 18th International foundrymen conference - Coexistence of material science and sustainable technology in economic growth / Dolić, Natalija ; Zovko Brodarac, Zdenka ; Begić Hadžipašić, Anita (ur.).
Sisak: University of Zagreb, Faculty of Metallurgy, Aleja narodnih heroja 3, Sisak, Croatia, 2019. str. 349-362 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
782.Jandrlić, Ivan; Rešković, Stoja; Čurćija, Dušan; Lazić, Ladislav; Brlić, TinModeling of stress distribution on the basis of the measured values of strain and temperature changes // AIMS Materials Science, 6 (2019), 4; 601-609 doi:10.3934/matersci.2019.4.601 (međunarodna recenzija, članak, znanstveni)
-
783.Tarandek, Patrik; Rešković, Stoja; Perković Obućina, Tihana; Kostić, Saša; Brlić, TinCold drawing of steel tubes // 18th International Foundrymen Conference - Coexistence of Material Science and Sustainable Technology in Economic Growth - Students' section / Ljerka Slokar Benić, Zdenka Zovko Brodarac (ur.).
Sisak, 2019. str. 11-11 (predavanje, sažetak, znanstveni) -
784.Skender, Filip; Brlić, Tin; Rešković, StojaInfluence of stretching rate on the beginning of cold deformation in niobium microalloyed steel // 18th International Foundrymen Conference - Coexistence of Material Science and Sustainable Technology in Economic Growth - Students' section / Slokar Benić, Ljerka ; Zovko Brodarac, Zdenka (ur.).
Sisak, 2019. str. 10-10 (predavanje, sažetak, znanstveni) -
785.Kozina, Franjo; Zovko Brodarac, Zdenka; Drobnjak, Dalibor; Jukić, IvanInvestigation of iron containing intermetallics in AlSi12 alloy with w (Mn/Fe) = 0.99 // Proceedings Book 18th international foundrymen conference entitled: Coexistence of material science and sustainable technology in economic growth / Dolić, Natalija ; Zovko Brodarac, Zdenka ; Begić Hadžipašić, Anita (ur.).
Sisak: Sveučilište u Zagrebu Metalurški Fakultet, 2019. str. 255-275 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
786.Kozina, Franjo; Zovko Brodarac, Zdenka; Petrič, MitjaInvestigation of equilibrium and non-equilibrium solidification of Al-2, 2Mg-2, 1Li alloy // MME SEE 2019 Metallurgical and Materials Engineering Congress of South-East Europe Book of Abstracts / Glišić, Dragomir ; Marković, Branislav ; Manojlović, Vaso (ur.).
Beograd: Association of Metallurgical Engineers of Serbia (AMES), 2019. str. 17-17 (predavanje, sažetak, ostalo) -
787.Krčelić, Blanka; Begić Hadžipašić, AnitaNapetosna korozija metala i metalnih legura kao fenomen prisutan u ljevarstvu // Knjiga sažetaka-Studentska sekcija: 18. Međunarodno savjetovanje ljevača / Slokar Benić, Ljerka ; Zovko Brodarac, Zdenka (ur.).
Sisak: Metalurški fakultet Sveučilišta u Zagrebu, 2019. str. 7-8 (predavanje, sažetak, znanstveni) -
788.Cerinski , Damijan; Baleta, Jakov; Lovrenić - Jugović , MartinaUtilizing a neural network modelling approach in the fixed bed biomass gasifier // Proceedings of the 14th International Conference on Accomplishments of Electrical and Mechanical Industries / Gvero, Petar ; Prochalska, Biljana ; Stipanović , Milivoj (ur.).
Banja Luka: Faculty of Mechanical Engineering University of Banja Luka, 2019. 28, sekcija 2/2, 1 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
789.Davor Stanić; Vedrana Špada; Dario IljkićInfluence of natural aging on the mechanical properties of high pressure die casting (HPDC) EN AC 46000-AlSi9Cu3(Fe) Al alloy // Materials Testing, Volume 61 (2019), Issue 5 (May 2019); 448-454 doi:10.3139/120.111341 (međunarodna recenzija, članak, znanstveni)
-
790.Book of Abstracts 18th International Foundrymen Conference, Coexistence of Materials Science and Sustainable Technology in Economic Growth, Students' section / Slokar Benić, Ljerka ; Zovko Brodarac Zdenka (ur.). Sisak: Metalurški fakultet Sveučilišta u Zagrebu, 2019 (zbornik)
-
791.Slokar Benić, Ljerka; Jandrlić, Ivan; Rešković, StojaEffect of subsequent heating on the microstructure and mechanical properties of Nb microalloyed steel // 18th International foundrymen conference, Coexistence of material science and sustainable technology in economic growth / Dolić, Natalija ; Zovko Brodarac, Zdenka ; Begić Hadžipašić, Anita (ur.).
Sisak: Metalurški fakultet Sveučilišta u Zagrebu, 2019. str. 180-187 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
792.Kožuh, Stjepan; Pavičić, Katarina; Ivanić, Ivana; Bizjak, Milan; Gojić, MirkoThe effect of annealing time on microstructure and impact energy of stainless steel AISI 316L // Proceedings Book 18th International Foundrymen Conference / Dolić, Natalija ; Zovko Brodarac, Zdenka ; Begić Hadžipašić, Anita (ur.).
Sisak: Metalurški fakultet Sveučilišta u Zagrebu, 2019. str. 275-287 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
793.Ivanić, Ivana; Kožuh, Stjepan; Pavičić, Nikolina; Čubela, Dijana; Beganović, Omer; Kosec, Borut; Gojić, MirkoMicrostructural analysis of cold drawn CuAlMn shape memory alloy wire // Proceedings book 18th International Foundrymen Conference / Dolić, Natalija ; Zovko Brodarac, Zdenka ; Begić Hadžipašić, Anita (ur.).
Sisak: Metalurški fakultet Sveučilišta u Zagrebu, 2019. str. 237-246 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
794.Proceedings Book of 18th International Foundrymen Conference Coexistence of Material Science and Sustainable Technology in Economic Growth / Dolić, Natalija ; Zovko Brodarac, Zdenka ; Begić Hadžipašić, Anita (ur.). Sisak: Metalurški fakultet Sveučilišta u Zagrebu, 2019 (zbornik)
-
795.Book of Abstracts of 18th International Foundrymen Conference: Coexistence of Material Science and Sustainable Tehnology in Economic Growth / Dolić, Natalija ; Zovko Brodarac, Zdenka ; Begić Hadžipašić, Anita (ur.). Sisak: Metalurški fakultet Sveučilišta u Zagrebu, 2019 (zbornik)
-
796.Brajčinović, Sandra; Begić Hadžipašić, Anita; Medved, Jožef; Kožuh, StjepanInfluence of medium on corrosion and microstructural properties of HTCS-130 tool steel for hot work // 18th International Foundrymen Conference Coexistence of material science and sustainable technology in economic growth / Dolić, Natalija ; Zovko Brodarac, Zdenka ; Begić Hadžipašić, Anita (ur.).
Sisak : Zagreb: University of Zagreb Faculty of Metallurgy, Sisak, Croatia, 2019. str. 188-205 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
797.Baleta, Jakov; Cerinski, Damijan; Qi, Fengsheng; Wang, Fang; Wang, Jin; Wang, XuebinThe influence of water mist injection on the film cooling process of casted turbine blades // Proceedings book 18th International Foundrymen Conference / Dolić, Natalija ; Zovko Brodarac, Zdenka ; Begić Hadžipašić, Anita (ur.).
Sisak: Metalurški fakultet Sveučilišta u Zagrebu, 2019. str. 106-121 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
798.Jandrlić, Ivan; Rešković, Stoja; Lazić, Ladislav; Brlić, Tin; Ćurčija, DušanAppropriate mathematical model for stress calculation based on the measured values of deformation and temperature changes // 18th International foundrymen conference, Coexistence of material science and sustainable technology in economic growth / Dolić, Natalija ; Zovko Brodarac, Zdenka ; Begić Hadžipašić, Anita (ur.).
Sisak: Metalurški fakultet Sveučilišta u Zagrebu, 2019. str. 145-152 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
799.Jajčinović, Igor; Brnardić, Ivan; Kožuh, Stjepan; Tolić, KristinaThe impact of multiwall carbon nanotubes on the photocatalytic properties of imobilizied TiO2 // Coexistence of material science and sustainable technology in economic growth / Dolić, Natalija ; Brodara Zovko, Zdenka ; Begić Hadžipašić, Anita (ur.).
Sisak: Metalurški fakultet Sveučilišta u Zagrebu, 2019. str. 247-254 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
800.Gudić, Senka; Rakuljić, Blanka; Vrsalović, Ladislav; Bizjak, Milan; Ivanić, Ivana; Kožuh, Stjepan; Gojić, MirkoInfluence of Mn on the corrosion behavior of CuAlMn alloy in NaCl solution // Proceedings book 18th International Foundryman Conference, Coexistence of material science and sustainable technology in economic growth / Dolić, Natalija ; Zovko Brodarac, Zdenka ; Begić Hadžipašić, Anita (ur.).
Sisak: Metalurški fakultet Sveučilišta u Zagrebu, 2019. str. 227-236 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
