Pregled po znanstvenom području: Metalurgija (MB: 2.08)

281.

Zovko Brodarac, Zdenka; Srečec, Ljiljana; Fabijanić, Ana

Centar za ljevarstvo - SIMET // Knjiga sažetaka: Tehnologije proizvodnje kalupa i jezgara u ljevaonicama / Dolić, Natalija ; Zovko Brodarac, Zdenka (ur.).
Sisak: Metalurški fakultet Sveučilišta u Zagrebu, 2019. str. 1-1 (predavanje, sažetak, stručni)

282.

Šnajdar Musa, Mateja; Huljev, Jurica

NOVA VRSTA GRAFITNG KOMPOZITA ZA PRIMJENU U IZMJENJIVAČIMA TOPLINE // Conference Proceedings - 20th International Conference on Materials - MATRIB 2019 / Šolić, Sanja ; Schauperl, Zdravko ; Pugar, Daniel (ur.).
Zagreb: Hrvatsko društvo za materijale i tribologiju (HDMT), 2019. str. 320-320 (pozvano predavanje, međunarodna recenzija, sažetak, znanstveni)

283.

Zovko Brodarac, Zdenka; Stanić, Davor

Effect of cooling rate on characteristic temperatures and microstructure development of AlSi9MgMn alloy // Book of Abstracts of the 5th Central and Eastern Conference on Thermal Analysis and Calorimetry (CEEC-TAC5) and 14th Mediterranean Confrenece on Calorimetry and Thermal Analysis (Medicta2019) / Rotaru, Andrei ; Ciprioti, Stefano Vecchio (ur.).
Rostock: Central and Eastern Conference on Thermal Analysis and Calorimetry (CEEC-TAC), 2019. str. 143-143 (predavanje, međunarodna recenzija, sažetak, znanstveni)

www.ceec-tac.org

284.

Cerinski, Damijan; Baleta, Jakov; Costa, Mário

Application of thermodynamic equilibrium modelling to a pilot-scale updraft gasifier // Book of Abstracts 14th International Conference on Energy for a Clean Environment / Costa, Mário (ur.).
Lisabon: Instituto Superior Técnico, 2019. str. 81-81 (predavanje, sažetak, znanstveni)

285.

Kozina, Franjo; Zovko Brodarac, Zdenka; Petrič, Mitja; Penko, Andrej

The influence of solution hardening on microstructure and mechanical properties of Al- 2.2Mg-2.1Li alloy // Abstract Proceedings WFO - Techincal Forum and 59th IFC Portoroz 2019 / Križman, Alojz (ur.).
Ljubljana: Slovenian Foundrymen Society, 2019. str. 194-195 (predavanje, domaća recenzija, sažetak, znanstveni)

286.

Govorčin Bajsić, Emi; Zdraveva, Emilija; Mijović, Budimir; Holjevac Grgurić, Tamara; Tominac Trcin, Mirna

Study on the properties of electrospun polycaprolactone /silk fibroin scaffolds // Book of abstracts of the 5th Central and Eastern European Conference on Thermal Analysis and Calorimetry (CEEC-TAC5) and 14th Mediterranean Conference on Calorimetry and Thermal Analysis (Medicta2019). / Rotaru, Andrei ; Vecchio Ciprioti, Stefano (ur.).
Rim: Central and Eastern European Committee for Thermal Analysis and Calorimetry (CEEC-TAC), 2019. str. 206-206 (poster, međunarodna recenzija, sažetak, znanstveni)

287.

Kozina, Franjo; Zovko Brodarac, Zdenka; Petrič, Mitja; Leskovar, Blaž

Thermodynamic consideration of Al-2, 2Mg-2, 1Li alloy behaviour // CEEC-TAC5 & Medicta 2019 BOOK OF ABSTRACTS / Rotaru, Andrei ; Vecchio Ciprioti, Stefano (ur.).
Rim: Central and Eastern European Committee for Thermal Analysis and Calorimetry (CEEC-TAC), 2019. str. 145-145 (predavanje, međunarodna recenzija, sažetak, znanstveni)

www.ceec-tac.org

288.

Manasijević, Dragan; Holjevac Grgurić, Tamara; Balanović, Ljubiša; Stamenković, Uroš; Gorgievski, Milan; Gojić, Mirko

Microstructural and thermal analysis of Cu-AI-Mn-Ag shape memory alloys // MME SEE 2019 Book of Abstracts Metallurgical & Materials Engineering Congress of South-East Europe / Glišić, Dragomir ; Marković, Branislav ; Manojlović, Vaso (ur.).
Beograd: Faiulty oTechnolos/ and Metallurgy, University of Bel$ade, 2019. str. 55-55 (poster, sažetak, znanstveni)

289.

Hršak, Damir; Štrkalj, Anita; Jandrlić, Ivan; Slokar, Ljerka; Glavaš, Zoran

Long Term Environmental Threats from Worldwide Industrial Waste // Proceedings of the XIII th International Conference "Preparation of Ceramic Materials" / Plešingerova, Beatrice ; Medved, David (ur.).
Košice: Tehnical university of Košice, Faculty of Materials, Metallurgy and Recycling, 2019. str. 202-203 (poster, međunarodna recenzija, sažetak, znanstveni)

290.

Tarandek, Patrik; Rešković, Stoja; Perković Obućina, Tihana; Kostić, Saša; Brlić, Tin

Cold drawing of steel tubes // 18th International Foundrymen Conference - Coexistence of Material Science and Sustainable Technology in Economic Growth - Students' section / Ljerka Slokar Benić, Zdenka Zovko Brodarac (ur.).
Sisak, 2019. str. 11-11 (predavanje, sažetak, znanstveni)

291.

Skender, Filip; Brlić, Tin; Rešković, Stoja

Influence of stretching rate on the beginning of cold deformation in niobium microalloyed steel // 18th International Foundrymen Conference - Coexistence of Material Science and Sustainable Technology in Economic Growth - Students' section / Slokar Benić, Ljerka ; Zovko Brodarac, Zdenka (ur.).
Sisak, 2019. str. 10-10 (predavanje, sažetak, znanstveni)

292.

Kozina, Franjo; Zovko Brodarac, Zdenka; Petrič, Mitja

Investigation of equilibrium and non-equilibrium solidification of Al-2, 2Mg-2, 1Li alloy // MME SEE 2019 Metallurgical and Materials Engineering Congress of South-East Europe Book of Abstracts / Glišić, Dragomir ; Marković, Branislav ; Manojlović, Vaso (ur.).
Beograd: Association of Metallurgical Engineers of Serbia (AMES), 2019. str. 17-17 (predavanje, sažetak, ostalo)

293.

Krčelić, Blanka; Begić Hadžipašić, Anita

Napetosna korozija metala i metalnih legura kao fenomen prisutan u ljevarstvu // Knjiga sažetaka-Studentska sekcija: 18. Međunarodno savjetovanje ljevača / Slokar Benić, Ljerka ; Zovko Brodarac, Zdenka (ur.).
Sisak: Metalurški fakultet Sveučilišta u Zagrebu, 2019. str. 7-8 (predavanje, sažetak, znanstveni)

294.

Godinić, Juraj; Šolić, Sanja

Proizvodnja i ispitivanje nodularnog lijeva kvalitete EN GJS 400-15 // Book of Abstracts - Students' section 18th International Foundrymen Conference - Coexistence of Material Science and Sustainable Technology in Economic Growth / Slokar Benić, Ljerka ; Zovko Brodarac, Zdenka (ur.).
Sisak: University of Zagreb Faculty of Metallurgy Aleja narodnih heroja 3, Sisak , Croatia, 2019. str. 3-3 (predavanje, sažetak, ostalo)

295.

Brnardić, Ivan; Špada, Vedrana; Stanić, Davor; Holjevac Grgurić, Tamara

Characterization of nanocomposites based on Al- alloy and multiwall carbon nanotubes prepared by industrial High Pressure Die Casting method // Abstract book MultiComp Aveiro Spring Meeting 2019
Portugal, 2019. str. 75-75 (poster, međunarodna recenzija, sažetak, znanstveni)

multicomp.web.ua.pt

296.

Jajčinović, Igor; Brnardić, Ivan; Grčić, Ivana; Tolić , Kristina

Primijena i utjecaj mikrovalova na imobilizaciju fotokatalizatora TiO2 na nosač // 26 Skup kemičara i kemijskih inženjera s međunarodnim sudjelovanjem / 4. simpozij "Vladimir Prelog" / Galić, Nives ; Rogošić, Marko (ur.).
Zagreb: Hrvatsko društvo kemijskih inženjera i tehnologa (HDKI), 2019. str. 202-202 (poster, recenziran, sažetak, znanstveni)

297.

Bunjan, Ivana; Džomba, Vlado; Zovko Brodarac, Zdenka

Procjena kvalitete odljevka primjenom numeričke simulacije // Knjiga sažetaka, 17th International Foundrymen Conference: Hi-tech casting solution and knowledge based engineering, Studentska sekcija / Slokar Benić, Ljerka ; Zovko Brodarac, Zdenka (ur.).
Sisak: Metalurški fakultet Sveučilišta u Zagrebu, 2018. str. 3-4 (predavanje, sažetak, znanstveni)

ifc.simet.hr

298.

Brajčinović, Sandra

Thermodynamics of Metallurgical Processes of Advanced Metallic Materials // Fourth Annual PhD Workshop PhD Study of Mechanical Engineering, Naval Architecture, Aeronautical Engineering and Metallurgical Engineering / Parunov, Joško ; Kožuh, Stjepan ; Bauer, Branko ; Duić, Neven ; Jokić, Andrej ; Landek, Darko ; Lisjak, Dragutin ; Lulić, Zoran ; Majetić, Dubravko ; Matijević ; Božidar ; Runje, Biserka ; Sorić, Jurica ; Terze, Zdravko (ur.).
Zagreb: Faculty of Mechanical Engineering and Naval Architecture Faculty of Metallurgy, 2018. str. 12-12 (radionica, domaća recenzija, sažetak, ostalo)

www.fsb.unizg.hr

299.

Zovko Brodarac, Zdenka

Suvremeni materijali, tehnologije i menadžment u ljevarstvu // 11. Znanstveno-stručni seminar, Suvremeni materijali, tehnologije i menadžment u ljevarstvu, Knjiga sažetaka / Dolić, Natalija ; Zovko Brodarac, Zdenka (ur.).
Sisak: Metalurški fakultet Sveučilišta u Zagrebu, 2018. str. 1-1 (predavanje, sažetak, stručni)

www.simet.unizg.hr

300.

Biliaieva, V. V.; Dzhepa, V.V.; Kochubey, О.О.; Mamuzić, Ilija

Numerical simulation pollutants transfer in industrial rooms after accidents // 13th International Symposium of Croatian Metallurgical Society "Materials and Metallurgy" SHMD 2018 : Book of Abstracts (tiskano u: Metalurgija 57 (2018) 3) / Mamuzić, Ilija (ur.).
Zagreb: Hrvatsko metalurško društvo, 2018. str. 216-216 (poster, međunarodna recenzija, sažetak, znanstveni)

hrcak.srce.hr

301.

Gubin, O.I.; Kochubey, О.О.; Kovalenko, O.A.; Mamuzić, Ilija; Shcherban, V. V.

Numerical investigation of temperature fi eld of a pipe in the application process of ion-plasma coating on its inner surface // 13th International Symposium of Croatian Metallurgical Society "Materials and Metallurgy" SHMD 2018 : Book of Abstracts (tiskano u: Metalurgija 57 (2018) 3) / Mamuzić, Ilija (ur.).
Zagreb: Hrvatsko metalurško društvo, 2018. str. 216-216 (poster, međunarodna recenzija, sažetak, znanstveni)

hrcak.srce.hr

302.

Siasiev, A.V.; Kochubey, О.О.; Mamuzić, Ilija; Topchii, R.O.

Mathematical model of the process of crystallization of the rod // 13th International Symposium of Croatian Metallurgical Society "Materials and Metallurgy" SHMD 2018 : Book of Abstracts (tiskano u: Metalurgija 57 (2018) 3) / Mamuzić, Ilija (ur.).
Zagreb: Hrvatsko metalurško društvo, 2018. str. 216-216 (poster, međunarodna recenzija, sažetak, znanstveni)

hrcak.srce.hr

303.

Kochubey, O.O.; Brazaluk, Iu.V.; Goman, O.G.; Mamuzić, Ilija; Poliakov, M.V.; Yevdokymov, D.V.

New Approach to Space Debris Problem // 13th International Symposium of Croatian Metallurgical Society "Materials and Metallurgy" SHMD 2018 : Book of Abstracts (tiskano u: Metalurgija 57 (2018) 3) / Mamuzić, Ilija (ur.).
Zagreb: Hrvatsko metalurško društvo, 2018. str. 216-216 (poster, međunarodna recenzija, sažetak, znanstveni)

hrcak.srce.hr

304.

Brazaluk, Iu.V.; Goman, O.G.; Kochubey, O.O.; Mamuzić, Ilija; Poliakov, M.V.; Yevdokymov, D.V.

Space metallurgy: modern aims // 13th International Symposium of Croatian Metallurgical Society "Materials and Metallurgy" SHMD 2018 : Book of Abstracts (tiskano u: Metalurgija 57 (2018) 3) / Mamuzić, Ilija (ur.).
Zagreb: Hrvatsko metalurško društvo, 2018. str. 216-216 (poster, međunarodna recenzija, sažetak, znanstveni)

hrcak.srce.hr

305.

Nechausov, A.; Mamuzić, Ilija; Kuchuk, N.

Synthesis of the air pollution level control system on the basis of hyperconvergent infrastructures // 13th International Symposium of Croatian Metallurgical Society "Materials and Metallurgy" SHMD 2018 : Book of Abstracts (tiskano u: Metalurgija 57 (2018) 3) / Mamuzić, Ilija (ur.).
Zagreb: Hrvatsko metalurško društvo, 2018. str. 215-215 (poster, međunarodna recenzija, sažetak, znanstveni)

hrcak.srce.hr

306.

Usenko, R.; Bichevnik, I.; Mamuzić, Ilija

Porosity of ceramic shell molds // 13th International Symposium of Croatian Metallurgical Society "Materials and Metallurgy" SHMD 2018 : Book of Abstracts (tiskano u: Metalurgija 57 (2018) 3) / Mamuzić, Ilija (ur.).
Zagreb: Hrvatsko metalurško društvo, 2018. str. 214-214 (poster, međunarodna recenzija, sažetak, znanstveni)

307.

Mamuzić, Ilija

Achievements of Croatian Metallurgical Society (CMS) 1952 – 2017 y // 13th International Symposium of Croatian Metallurgical Society "Materials and Metallurgy" SHMD 2018 : Book of Abstracts (tiskano u: Metalurgija 57 (2018) 3) / Mamuzić, Ilija (ur.).
Zagreb: Hrvatsko metalurško društvo, 2018. str. 212-212 (poster, međunarodna recenzija, sažetak, stručni)

hrcak.srce.hr

308.

Mamuzić, Ilija

Extrusion process // 13th International Symposium of Croatian Metallurgical Society "Materials and Metallurgy" SHMD 2018 : Book of Abstracts (tiskano u: Metalurgija 57 (2018) 3) / Mamuzić, Ilija (ur.).
Zagreb: Hrvatsko metalurško društvo, 2018. str. 207-207 (poster, međunarodna recenzija, sažetak, znanstveni)

hrcak.srce.hr

309.

Mamuzić, Ilija

Proporties of superplastically formed aluminium alloy // 13th International Symposium of Croatian Metallurgical Society "Materials and Metallurgy" SHMD 2018 : Book of Abstracts (tiskano u: Metalurgija 57 (2018) 3) / Mamuzić, Ilija (ur.).
Zagreb: Hrvatsko metalurško društvo, 2018. str. 207-207 (poster, međunarodna recenzija, sažetak, znanstveni)

hrcak.srce.hr

310.

Mamuzić, Ilija

Metal motion during filling in ingot mould // 13th International Symposium of Croatian Metallurgical Society "Materials and Metallurgy" SHMD 2018 : Book of Abstracts (tiskano u: Metalurgija 57 (2018) 3) / Mamuzić, Ilija (ur.).
Zagreb: Hrvatsko metalurško društvo, 2018. str. 200-200 (poster, međunarodna recenzija, sažetak, znanstveni)

hrcak.srce.hr

311.

Mamuzić, Ilija

Future of metallurgical industry // 13th International Symposium of Croatian Metallurgical Society "Materials and Metallurgy" SHMD 2018 : Book of Abstracts (tiskano u: Metalurgija 57 (2018) 3) / Mamuzić, Ilija (ur.).
Zagreb: Hrvatsko metalurško društvo, 2018. str. 200-200 (poster, međunarodna recenzija, sažetak, znanstveni)

hrcak.srce.hr

312.

Mamuzić, Ilija

Model of fast cooling processes // 13th International Symposium of Croatian Metallurgical Society "Materials and Metallurgy" SHMD 2018 : Book of Abstracts (tiskano u: Metalurgija 57 (2018) 3) / Mamuzić, Ilija (ur.).
Zagreb: Hrvatsko metalurško društvo, 2018. str. 200-200 (poster, međunarodna recenzija, sažetak, znanstveni)

313.

Mamuzić, Ilija

Effect of heat input on residual stress // 13th International Symposium of Croatian Metallurgical Society "Materials and Metallurgy" SHMD 2018 : Book of Abstracts (tiskano u: Metalurgija 57 (2018) 3) / Mamuzić, Ilija (ur.).
Zagreb: Hrvatsko metalurško društvo, 2018. str. 191-191 (poster, međunarodna recenzija, sažetak, znanstveni)

314.

Kutsova, V. Z.; Ayupova, T. A.; Mamuzić, Ilija

Atomic interaction and choice of modificators for Ak7ch alloy // 13th International Symposium of Croatian Metallurgical Society "Materials and Metallurgy" SHMD 2018 : Book of Abstracts (tiskano u: Metalurgija 57 (2018) 3) / Mamuzić, Ilija (ur.).
Zagreb: Hrvatsko metalurško društvo, 2018. str. 187-187 (poster, međunarodna recenzija, sažetak, znanstveni)

315.

Šolić, Sanja; Schauperl, Zdravko; Tropša, Vlado

Struktura i svojstva materijala za aditivne tehnologije // Book of Abstracts, 22nd International Conference on Printing, Design and Graphic Communications Blaž Baromić 2018 / Mikota, Miroslav (ur.).
Zagreb: Hrvatsko društvo grafičara, 2018. str. 19-19 (predavanje, međunarodna recenzija, sažetak, znanstveni)

316.

Aleksandrov Fabijanić, Tamara; Brlić, Tin; Jandrlić, Ivan; Franz, Mladen; Alar, Željko; Rešković, Stoja

The influence of Nb content on the mechanical properties of micro alloyed low carbon steels // 19th World Congress on Materials Science and Engineering – conference proceedings / Journal of Material Sciences & Engineering, 7
Brisel: Hilaris Publishing, 2018. str. 151-152 doi:10.4172/2169-0022-C8-113 (predavanje, međunarodna recenzija, sažetak, znanstveni)

doi www.hilarispublisher.com www.hilarispublisher.com

317.

Šolić, Sanja; Tropša, Vlado; Godec, Matjaž

Inluence Of Sub-Zero Treatments On The Properties Of Austempered Ductile Cast Iron // 26th INTERNATIONAL CONFERENCE ON MATERIALS AND TECHNOLOGY: PROGRAM AND BOOK OF ABSTRACTS / Godec, Matjaž ; Donik, Črtomir: Kocijan, Aleksandra ; Paulin, Irena (ur.).
Ljubljana: Inštitut za kovinske materiale in tehnologije, Ljubljana, Lepi pot 11, Ljubljana, Slovenija, 2018. str. 126-126 (pozvano predavanje, međunarodna recenzija, sažetak, znanstveni)

mit.imt.si

318.

Ćorić, Danko; Franz, Mladen; Matija, Sakoman

Transformation temperatures and mechanical properties of ausforming treated Cu-Zn-Al shape memory alloy // Book of Abstracts of the 12th European Symposium on Thermal Analysis and Calorimetry (ESTAC12) / Rotaru, Andrei ; Popescu, Crişan (ur.).
Brasov: Central and Eastern European Committee for Thermal Analysis and Calorimetry (CEEC- TAC), 2018. str. 191-191 (poster, međunarodna recenzija, sažetak, znanstveni)

www.estac12.org

319.

Govorčin Bajsić, Emi; Ujčić, Massimo; Holjevac Grgurić, Tamara

Crystallization kinetic of TPU/PP blends // Book of Abstracts of the 12th European Symposium on Thermal Analysis and Calorimetry(ESTAC 12) / Rotaru, Andrei ; Popescu, Crisan (ur.).
Brašov, Rumunjska: Central and Easter European Committee for Thermal Analysis and Calorimetry ( CEEC_TAC), 2018. str. 391-391 (poster, međunarodna recenzija, sažetak, znanstveni)

estac12.org

320.

Vukelić, Goran; Vizentin, Goran; Masar, Aleksandra

Hydraulic Torque Wrench Adapter Failure Analysis // Proceedings of 18th International Conference on New Trends in Fatigue and Fracture / Reis, Luis ; Freitas, Manuel ; Anes, Vitor (ur.).
Lisabon: IDMEC Instituto de Engenharia Mecânica Instituto Superior Técnico University of Lisbon, 2018. str. 213-216 (predavanje, međunarodna recenzija, sažetak, znanstveni)

nt2f.tecnico.ulisboa.pt

321.

Pezer, Robert; Trapić, Ivan; Sorić, Jurica

Molecular dynamics simulation of stress distribution in 2D systems // 16th Edition of the European Mechanics of Material Conference, Book of Abstracts
Nantes, 2018. str. 486-486 (predavanje, međunarodna recenzija, sažetak, znanstveni)

Pristup cjelovitom tekstu rada

322.

Ilić, Ana; Sila, Sara; Švagelj, Anamarija

Procjena kakvoće prehrane u ljetnim izviđačkim kampovima // Book of abstracts of 5th International Congress of Nutritionists / Hrvatski akademski centar primijenjenog nutricionizma (ur.).
Zagreb: Hrvatski akademski centar primijenjenog nutricionizma, 2017. str. 92-92 (poster, međunarodna recenzija, sažetak, znanstveni)

issuu.com

323.

Holjevac Grgurić, Tamara; Kožuh, Stjepan; Ivanić, Ivana; Manasijević, Dragan; Balanović, Ljubiša; Gojić, Mirko

The Effect of Al/Mn Content on the Thermodynamic Parameters of Cu-Al-Mn Alloys // Book of Abstracts - 4th Central and Eastern European Conference on Thermal Analysis and Calorimetry
Kišinjev, Moldavija, 2017. str. 1-1 (poster, međunarodna recenzija, sažetak, znanstveni)

324.

Brnardić, Ivan; Sofilić, Tahir; Mutavdžić Pavlović, Dragana; Udovčić, Anela; Mateša, Sarah; Grčić, Ivana; Rađenović, Ankica

Sorption of pharmaceuticals on waste sludge generated from pickling of steel pipes // 25. Hrvatski skup kemičara i kemijskih inženjera / Ana Šantić, Marijana Đaković (ur.).
Zagreb: Hrvatsko kemijsko društvo / Hrvatsko društvo kemijskih inženjera i tehnologa, 2017. str. 227-227 (poster, sažetak, znanstveni)

325.

Bauer, Branko; Milaković, Miran; Mihalic Pokopec, Ivana

Effect of gating system design parameters on mold filling properties // Proceedings book 16th INTERNATIONAL FOUNDRYMEN CONFERENCE Global Foundry Industry - Perspectives for the Future / Zovko Brodarac, Zdenka ; Dolić, Natalija ; Begić Hadžipašić, Anita (ur.).
Sisak: Sveučilište u Zagrebu, Metalurški fakultet, 2017. str. 10-10 (predavanje, međunarodna recenzija, sažetak, ostalo)

326.

Salopek, Goran; Žic, Samir; Dunđer, Marko; Samardžić, Ivan

Determination of welding parameters in hard surfacing process of AISI 316 stainless steel substrate with fused tungsten carbide iron-based tubular wires // 9. International Scientific-Professional Conference SBW 2017 / Ivan Samardžić, Ivan ; Despotović, Božo (ur.).
Slavonski Brod: Strojarski fakultet Sveučilišta u Slavonskom Brodu, 2017. str. 38-38 (predavanje, međunarodna recenzija, sažetak, znanstveni)

Pristup cjelovitom tekstu rada www.sfsb.unios.hr

327.

Hršak, Damir

Odnos čistoće materijalnog okoliša i psihičke stabilnosti stanovništva // Presentation abstracts of 1st International Transdisciplinary Symposium Bioethics and Aporia of Psyche / Janeš, Luka ; Knorr Lidija, Perušić Luka (ur.).
Zagreb: Hrvatsko bioetičko društvo, 2017. str. 45-45 (predavanje, međunarodna recenzija, sažetak, znanstveni)

328.

Duspara, Miroslav; Starčević, Valnea; Samardžić, Ivan; Horvat, Marko; Marić, Dejan

OPTIMIZATION OF ABRASIVE WATERJET MACHINING PROCESS PARAMETERS // Book of Abstracts / Šolić, Sanja ; Dolić, Natalija (ur.).
Korčula: Sveučilište Sjever, 2017. str. 35-46 (poster, međunarodna recenzija, sažetak, znanstveni)

329.

Brovkin, Vladimir L.; Lazić, Ladislav; Varga, Augustin; Kizek, Jan; Kovtun, A.O.

Teplovaya rabota nagrevatel'noy pechi s shagayushchim podom na smesi prirodnogo i domennogo gaza // Teplotekhnika, energetika i ekologiya v metallurgii kniga vtoraya / Proydak, Yuriy S.. (ur.).
Dnipro: Nova ideolohiya, 2017, 2017. str. 78-78 (predavanje, domaća recenzija, sažetak, znanstveni)

330.

Lazić, Ladislav; Brovkin V.L; Varga, Augustin; Kizek, Jan

Improving energy efficiency of aluminium melting furnace with increase of wall emissivity // Teplotekhnika, energetika i ekologiya v metallurgii Kniga pervaya / Proydak, Yuriy S.. (ur.).
Dnipro: Nova ideolohiya, 2017, 2017. str. 91-91 (predavanje, domaća recenzija, sažetak, znanstveni)

331.

Kozina, Franjo; Zovko Brodarac, Zdenka; Petrič, Mitja

Thermodynamic evaluation of Al-2, 5 wt.%Mg-0, 7wt.%Li // Book Of Abstract of 4th CEntral and Eastern European Conference on Thermal Analysis and Calorimetry / Rotaru Andrei ; Lupascu Tudor ; Paladi Florentin (ur.).
Kišinjev, Moldavija: Academica Greifswald, 2017. str. 124-124 (predavanje, međunarodna recenzija, sažetak, ostalo)

332.

Kozina, Franjo; Zovko Brodarac, Zdenka; Mrvar, Primož; Petrič, Mitja

The Al-2.5wt%Mg-0.7wt%Li alloy mechanical properties // ABstract Proceedings, 57th International Foundry Conference / Križman, Alojz ; Mrvar, Primož ; Medved, Jožef ; Schumacher Peter ; Deike, Rudiger ; Jan-Blažić Mirjam ; Petrič, Mitja (ur.).
Ljubljana: Društvo Livarjev Slovenije, 2017. str. 84-85 (poster, sažetak, ostalo)

333.

Kozina, Franjo; Zovko Brodarac, Zdenka; Petrič, Mitja

Microstructure development in as-cast Al-Mg-Li alloy // Book of Abstracts, 13th Multinational Congress on Microscopy / Gajović, Andreja ; Weber, Igor ; Kovačević, Goran ; Čadež, Vida ; Šegota, Suzana ; Vidoš, Ana (ur.).
Zagreb: Institut Ruđer Bošković ; Hrvatsko mikroskopijsko društvo, 2017. str. 549-550 (poster, međunarodna recenzija, sažetak, ostalo)

mcm2017.irb.hr

334.

Hršak, Damir; Bermanec, Vladimir; Štrkalj, Anita; Glavaš, Zoran

The Possibilities of Titanium Dioxide Obtaining from Red Mud // Proceedings of the XII th International Conference "Preparation of Ceramic Materials" / Plešingerova, Beata ; Hnatko Mirostav ; Fabian, Martin ; Horkavcova, Diana ; Popovič, Luboš ; Lofaj, František ; Sučik, Gabriel (ur.).
Košice: Technical University of Košice Faculty of Metallurgy, 2017. str. 176-177 (poster, međunarodna recenzija, sažetak, stručni)

335.

Holjevac Grguric, Tamara; Govorčin Bajsić, Emi; Persić, Ana; Grozdanić, Vedrana; Mijović, Budimir; Zdraveva, Emilija; Brnardić, Ivan

The influence of different content of CNT on the thermal properties of PCL // COST CA15107
Zagreb, Hrvatska, 2017. str. - (poster, sažetak, znanstveni)

336.

Jandrlić, Ivan; Rešković, Stoja; Vodopivec, Franc

Determining the amount of Lüders deformation in niobium microalloyed steel. 12th international symposium of croatian metallurgical society // Book of abstracts, Materials – Section “C”, Metalurgija 55 (2016) 3 / Mamuzić Ilija (ur.).
Zagreb: Hrvatsko metalurško društvo, 2016. str. 567-567 (poster, međunarodna recenzija, sažetak, znanstveni)

337.

Zovko Brodarac, Zdenka

Uvodnik: Lean proizvodnja odljevaka // 9. znanstveno-stručni seminar, Lean proizvodnja odljevaka, Knjiga sažetaka / Dolić, Natalija ; Zovko Brodarac, Zdenka (ur.).
Sisak: Metalurški fakultet Sveučilišta u Zagrebu, 2016. str. 1-1 (predavanje, sažetak, stručni)

www.simet.unizg.hr www.simet.unizg.hr

338.

Šolić, Sanja; Podgornik, Bojan; Godec, Matjaž

ULTRA ČVRSTI BAINITNI ČELICI ZA AUTOMOBILSKU INDUSTRIJU // Proceedings of the 17th International conference MATRIB 2016 - Materials, Tribology, Recycling / Žmak, Irena ; Aleksandrov Fabijanić, Tamara ; Ćorić, Danko (ur.).
Zagreb: Hrvatsko društvo za materijale i tribologiju (HDMT), 2016. str. 395-395 (pozvano predavanje, međunarodna recenzija, sažetak, znanstveni)

339.

Živković, Dragana; Stanojević Šimšić, Zdenka; Manasijević, Dragan; Holjevac Grgurić, Tamara

Experimental investigation of Cu-Al-Au shape memory alloys // 25th Symposium of Thermal Analysis and Calorimetry-Eugen Segal / Budrugeac, Petru ; Rotaru, Andrei (ur.).
Bukurešt: SITECH, 2016. str. 28-28 (poster, međunarodna recenzija, sažetak, ostalo)

340.

Stanić, Davor; Grozdanić, Vedrana; Brnardić, Ivan; Holjevac Grgurić, Tamara; Unkić, Faruk; Smoljan, Božo

Nanocomposites based on AlSi9Cu3(Fe) alloy and cabon nanotubes, preparation and properties // 15th International Foundrymen Conference / Dolić, Natalija ; Zovko Brodoarac, Zdenka (ur.).
Sisak: Metalurški fakultet Sveučilišta u Zagrebu, 2016. str. 178-185 (predavanje, međunarodna recenzija, sažetak, znanstveni)

341.

Zovko Brodarac, Zdenka

PREDGOVOR: Inovacije u službi konkurentnosti // Book of Abstract, 8th SCIENTIFIC-EXPERT SEMINAR: Innovations as a measure of competitiveness / Zovko Brodarac, Zdenka ; Vanić, Lana (ur.).
Sisak: Metalurški fakultet Sveučilišta u Zagrebu, 2015. str. 1-2 (predavanje, sažetak, stručni)

342.

Jerčinović, Marko; Radić, Nikola; Salamon, Krešimir; Čekada, Miha; Drnovšek, Aljaž; Panjan, Peter

Structure and nanohardness of TaNx thin films prepared by reactive magnetron sputtering // 22nd International Scientific Meeting on Vacuum Science and Technique: Programme and Book of Abstracts / Kovač, Janez ; Jakša, Gregor (ur.).
Ljubljana: Slovenian Society for Vacuum Technique, 2015. str. 29-29 (poster, međunarodna recenzija, sažetak, znanstveni)

343.

Holjevac Grgurić, Tamara; Gojić, Mirko; Živković, Dragana; Kostov, Ana; Kožuh, Stjepan

Characterization of Cu-based shape memory alloys // XXIV. Hrvatski skup kemičara i kemijskih inženjera 2015 / Ukić, Šime ; Bolanča Tomislav (ur.).
Zagreb: Hrvatsko društvo kemijskih inženjera i tehnologa / Hrvatsko kemijsko društvo, 2015. str. - (poster, domaća recenzija, sažetak, znanstveni)

344.

Jašarević, Aleksandar; Blečić Kavur, Martina; Ćubela, Diana

Special Edition: Studies of Late Bronze Age hoards from northern Bosnia // Archaeometallurgy in Europe IV, Madrid 2015. Abstract book
Madrid: Universidad Autónoma de Madrid, 2015. str. 71-72 (predavanje, međunarodna recenzija, sažetak, znanstveni)

Pristup cjelovitom tekstu rada

345.

Lazić, Ladislav; Lovrenić-Jugović, Martina; Grubišić, Željko

The calculation of temperature increment during the cross roll piercing operation // Proceedings of 14th Internatial Scientific Conference : Energy Transformations in Industry (ETiI 2015) / Varga, A., Jandačka, J. Kizek, J. Repašova, M., Lukač, L. et al. (ur.).
Stará Ľubovňa: Editorial centre of faculty BERG TU of Košice, 2015. str. 98-99 (plenarno, međunarodna recenzija, sažetak, znanstveni)

346.

Šolić, Sanja; Schauperl, Zdravko; Kolednjak, Davor

Phase Transformations in HSLA Steel Welds Relative to Welding Parameters // Program and Book of Abstracts of 23rd INTERNATIONAL CONFERENCE ON MATERIALS AND TECHNOLOGY / Godec, Matjaž ; Donik, Črtomir ; Paulin, Irena ; Kocijan, Aleksandra (ur.).
Ljubljana: Inštitut za kovinske materiale in tehnologije, Ljubljana, 2015. str. 220-220 (poster, međunarodna recenzija, sažetak, znanstveni)

icmt23.com

347.

Holjevac Grgurić, Tamara; Gojić, Mirko; Živković, Dragana; Kostov, Ana; Anžel, Ivan

Thermoelastic Martensitic Transformation in Cu-Al- Mn alloy // Book of Abstracts 3rd Central and European Conference on Thermal Analysis and Calorimetry / Rotaru, Andrei, Cerc Korošec, Romana (ur.).
Greifswald: Academia Greisfwald, 2015. str. 269-269 (poster, sažetak, znanstveni)

348.

Zovko Brodarac, Zdenka; Holjevac Grgurić, Tamara; Šuica, Vanja; Kalinić, Josip

Thermodynamic stability of microconstituents in AlSi11 alloy // Book of Abstracts 3rd Central and European Conference on Thermal Analysis and Calorimetry / Rotaru, Andrei ; Cerc Korošec, Romana (ur.).
Greifswald: Central and European Comittee for Thermal Analysisi and Calorimetry, 2015. str. 109-109 (predavanje, međunarodna recenzija, sažetak, znanstveni)

349.

Hršak, Damir; Bermanec, Vladimir; Štrkalj, Anita; Slokar, Ljerka; Glavaš, Zoran; Mašinović, Dario

The Possibilities of Hydrometalurgical Using of Manganese Ore from Bihać Region // Proceedings book of XI. International Conference Preparation of Ceramic Materials / Lofaj, František ; Hnatko, Miroslav ; Plešingerova, Beatrice, Sučik, Gabriel ; Horkavcova, Diana ; Fabian, Martin (ur.).
Herl'any: Technical University of Košice, 2015. str. 128-130 (poster, međunarodna recenzija, sažetak, stručni)

350.

Slokar, Ljerka; Štrkalj, Anita; Glavaš, Zoran; Maldini, Krešimir; Hršak, Damir

The influence of grain size of waste foundry sands on removal percentage of Copper ions // 3rd Croatian Microscopy Congress with International Participation, Book of Abstract / Ambriović Ristov, Andreja ; Gajović, Andreja ; Weber Igor ; Vidoš, Ana (ur.).
Zagreb: Institut Ruđer Bošković ; Hrvatsko mikroskopijsko društvo, 2015. str. 76-77 (predavanje, međunarodna recenzija, sažetak, znanstveni)

Pristup cjelovitom tekstu rada

351.

Stanojević Šimšić, Zdenka; Živković, Dragana; Holjevac Grgurić, Tamara; Marković, Ivana; Marković, Desimir; Todorović, Radiša; Manasijević, Dragan; Kostov, Ana Mirko Gojić, KatarinaTerzić

Investigation of microstructural and mechanical characteristics of the alloys from section with 90 at % Cu in ternary Cu-Al-Ag system // Proceedings Book of 14th International Foundrymen Conference-Development and Optimatization of the Castings Production Processes / Faruk, Unkić (ur.).
Zagreb: Metalurški fakultet Sveučilišta u Zagrebu, 2014. str. 1-1 (poster, sažetak, znanstveni)

352.

Jenko, Darja; Šolić, Sanja; Dražić, Goran; Leskovšek, Vojteh; Jenko, Monika

Transmission Electron Microscopy Characterization of PM S390 MC high-speed steel // Programme schedule and book of abstracts / 15th Joint Vacuum Conference, JVC15, Vienna / Werner, Wolfgang S.M ; .Bellissimo, Alessandra (ur.).
Beč: JVC 15 2014, 2014. str. 176-176 (predavanje, međunarodna recenzija, sažetak, znanstveni)

www.iap.tuwien.ac.at

353.

Malina, Jadranka; Labidi, May; Slokar, Ljerka

The effect of lactic acid on local corrosion of orthopedic stainless steel // Book of Abstracts-23rd Congress of Chemists and Technologists of Macedonia
Ohrid, Sjeverna Makedonija, 2014. (poster, međunarodna recenzija, sažetak, ostalo)

354.

Gojić, Mirko; Kosec, Borut; Kožuh, Stjepan

Correlation of microstructure and functional properties of shape memory alloys // Programme and The Book of Abstracts the Rosov Pin 2014 / Jokanović, Vukoman (ur.).
Novi Sad: Vinča Institute of Nuclear Sciences ; Engineering Academy of Serbia, 2014. str. 25-26 (plenarno, sažetak, znanstveni)

355.

Slokar, Ljerka

Research infrastructure at Faculty of Metallurgy in Sisak // Programme and the Book of Abstracts METGLASS Workshop, Metallic glasses: past, present & future / Salčinović Fetić, Amra (ur.).
Sarajevo: Bosnian Physical Society, 2014. str. 22-22 (pozvano predavanje, sažetak, ostalo)

Pristup cjelovitom tekstu rada www.pmf.unsa.ba

356.

Kump A., Nikolaš J., Obreht B., Gojsević M. G., Mrvar P.

TOPLINSKA ANALIZA KAO METODA KONTROLE I UPRAVLJANJA TALJEVINE SIVIH LJEVOV // Development and Optimization of the Casting Production Processes / F. Unkić (ur.).
Sisak: Metalurški Fakultet Sisak, 2014. str. 1-1 (predavanje, sažetak, znanstveni)

357.

Kump A., Obreht B, Nikolaš J, Gojsević M. G., Mrvar P.

Control of nucleating potential with a dynamic inoculation of cast iron with lamellar graphite // 53. International Foundry Conference Portorož 2013
Portorož, Slovenija, 2014. str. 1-1 (predavanje, sažetak, znanstveni)

358.

G. Gojsević Marić, D. Žveglić, B. Dikić, B. Gošnjak, F. Unkić

Iskustva u razvoju prototipnog kočionog diska za željeznice od vermikularnog lijeva // 14 Međunarodno savjetovanje ljevača, Opatija 2014 / F. Unkić (ur.).
Sisak: Metalurški Fakultet Sisak, 2014. str. 9-9 (predavanje, sažetak, znanstveni)

359.

Rešković, Stoja; Jandrlić, Ivan; Vodopivec, Franc

Influence of strain rate on the beginning of plastic deformation in niobium microalloyed steel // Summaries of absracts of 11th International Symposium of Croatian Metallurgical Society "Materials and Metallurgy" ; u Metalurgija 53 (2014) (3)3 / Mamuzić, Ilija (ur.).
Zagreb: Hrvatsko metalurško društvo, 2014. str. 421-421 (poster, međunarodna recenzija, sažetak, znanstveni)

360.

Jandrlić, Ivan; Rešković, Stoja; Lovrenić- Jugović, Martina

On the thermoelastic behaviour of low carbon steel // Summaries of abstracts from 11th International Symposium of Croatian Metallurgical Society "Materials and Metallurgy", tiskano u Metalurgija 53(2014)3, 421 / Mamuzić, Ilija (ur.).
Zagreb: Hrvatsko metalurško društvo, 2014. str. 421-421 (poster, međunarodna recenzija, sažetak, znanstveni)

361.

Muzyka, N.R.; Shvets, V.P.; Mamuzić, Ilija

Determination of Stresses and Strains in an Elasto-plastically Deformed Product from the Hardness Characteristics // Summaries of lectures of the 11th international symposium of Croatian Metallurgical Society SHMD '2014 : Materials and Metallurgy, published in Metalurgija 53 (2014) 3 / Mamuzić, Ilija (ur.). -
Zagreb: Hrvatsko metalurško društvo, 2014. str. x-x (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

362.

Shvets, V.P.; Bulakh, P.A.; Maslo, A.N.; Mamuzić, Ilija

Damageafaility of Steel 25Kh1M1FA under Long-term Loading at Elevated Temperatures // Summaries of lectures of the 11th international symposium of Croatian Metallurgical Society SHMD '2014 : Materials and Metallurgy, published in Metalurgija 53 (2014) 3 / Mamuzić, Ilija (ur.). -
Zagreb: Hrvatsko metalurško društvo, 2014. str. x-x (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

363.

Grechanyuk, N.I.; Minakova, R.V.; Bukhanovskii*, V.V.; Rudnitsky, N.P.; Mamuzić, Ilija

Microlayered Condensed Materials on Basis of Copper, Refractory, Rare-earth Metals, and Carbon for Electrodes and Electrical Contacts // Summaries of lectures of the 11th international symposium of Croatian Metallurgical Society SHMD '2014 : Materials and Metallurgy, published in Metalurgija 53 (2014) 3 / Mamuzić, Ilija (ur.). -
Zagreb: Hrvatsko metalurško društvo, 2014. str. x-x (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

364.

Kravchyk, R.V.; Mamuzić, Ilija

Deformation Behavior of Thin Aluminum Plate under Equibiaxial Tension // Summaries of lectures of the 11th international symposium of Croatian Metallurgical Society SHMD '2014 : Materials and Metallurgy, published in Metalurgija 53 (2014) 3 / Mamuzić, Ilija (ur.). -
Zagreb, 2014. str. x-x (poster, sažetak, znanstveni)

365.

Netrebskii, M.A.; Rabkina, M.D.; Mutas; V.V.; Mamuzić, Ilija

Service Defects and Assessment of their Influence on Strength of Pressure Vessels and Pipelines in Petroleum Processing Production Systems // Summaries of lectures of the 11th international symposium of Croatian Metallurgical Society SHMD '2014 : Materials and Metallurgy, published in Metalurgija 53 (2014) 3 / Mamuzić, Ilija (ur.). -
Zagreb: Hrvatsko metalurško društvo, 2014. str. x-x (poster, međunarodna recenzija, sažetak, ostalo)

366.

Ban’ko, S.M.; Kharchenko, V.V.; Kobelsky, S.V.; Kravchenko, V.I.; Chirkov, A.Yu.; Mamuzić, Ilija

Stress State of the Header-to-PGV-1000M Steam Generator Connector Weldment with a Cavity // Summaries of lectures of the 11th international symposium of Croatian Metallurgical Society SHMD '2014 : Materials and Metallurgy, published in Metalurgija 53 (2014) 3 / Mamuzić, Ilija (ur.). -
Zagreb: Hrvatsko metalurško društvo, 2014. str. x-x (poster, sažetak, znanstveni)

public.carnet.hr

367.

Kharchenko, V.V.; Kondryakov, E.A.; Panasenko, A.V.; Mamuzić, ilija

Investigation of the Crack Propagation in the Charpy Specimens Under Impact Loading on Vertical Instrumented Drop-weight Impact Testing Machine // Summaries of lectures of the 11th international symposium of Croatian Metallurgical Society SHMD '2014 : Materials and Metallurgy, published in Metalurgija 53 (2014) 3 / Mamuzić, Ilija (ur.). -
Zagreb: Hrvatsko metalurško društvo, 2014. str. x-x (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

368.

Makaev, A.G.; Kharchenko, V.V.; Bukhanovskii, V.V.; Mamuzić, Ilija

Finite Element Simulation of the Small Punch Test // Summaries of lectures of the 11th international symposium of Croatian Metallurgical Society SHMD '2014 : Materials and Metallurgy, published in Metalurgija 53 (2014) 3 / Mamuzić, Ilija (ur.). -
Zagreb: Hrvatsko metalurško društvo, 2014. str. x-x (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

369.

Ivana Mihalić; Faruk Unkić; Branko Bauer

Čvorićasti grafit u debelostijenim odljevcima - mehanizmi nastanka i utjecajni faktori // Proceedings book of 13th International foundryman conference / Glavaš, Zoran ; Zovko Brodarac, Zdenka ; Dolić, Natalija (ur.).
Sisak: Metalurški fakultet Sveučilišta u Zagrebu, 2013. str. 257-276 (predavanje, sažetak, znanstveni)

370.

Holjevac Grgurić, Tamara; Mehinović, Almir; Brnardić, Ivan; Mandić, Vilko

Toplinska stabilnost komercijalnih bentonita // Knjiga sažetaka / Andrea Hadžiev, Zdenko Blažeković (ur.).
Zagreb: Hrvatsko društvo kemijskih inženjera i tehnologa: Hrvatsko kemijsko društvo, 2013. str. 223-223 (poster, sažetak, znanstveni)

371.

Jekić Dragica, Rešković Stoja, Gotal Dalibor

Utjecaj inhibitora korozije na parametre procesa dekapiranja cijevi // Scientific Symposium 46th International Symposium FUELS & LUBRICANTS
Zagreb, 2013. str. 123-123 (poster, međunarodna recenzija, sažetak, znanstveni)

372.

Rešković, Stoja; Pedišić, Ljiljana; Topolovec Josip

Examination of corrosion cause of welded pipes // Scientific Symposium 46th International Symposium FUELS & LUBRICANTS
Zagreb: Croatian Society for Fuels and Lubricants, 2013. str. 99-99 (predavanje, međunarodna recenzija, sažetak, znanstveni)

373.

Rešković, Stoja; Brlić, Tin; Jakovljević, Suzana; Sladojević, Milan

Investigation of causes of product surface contamination in production of alumina ceramics // 46th International Symposium Fuels & Lubricants Scientific
Zagreb: Croatian Society for Fuels and Lubricants, 2013. str. 123-123 (poster, međunarodna recenzija, sažetak, znanstveni)

374.

Slokar, Ljerka; Matković, Tanja; Matković, Prosper

Microstructural and mechanical characterization of as-cast Ti-Nb-Zr alloys for biomedical applications // Programme and abstracts Intermetallics 2013 / Deutsche Gesellschaft fuer Metallkunde (DGM) (ur.).
Bad Staffelstein: DGM, 2013. str. 98-98 (poster, međunarodna recenzija, sažetak, znanstveni)

375.

Hršak, Damir; Bermanec, Vladimir; Žigovečki Gobac, Željka; Štrkalj, Anita; Dolić, Natalija

Hydrometallurgical Treatment of Covellite Rich Ore by Iron (III) Sulfate // Proceedings book of Xth International Conference Preparation of Ceramics Materials / Plešingerová, Beatrice ; Sučik, Gabriel ; Hršak, Damir ; Horkavcová, Diana (ur.).
Herl'any: Technical University of Košice, 2013. str. 74-75 (predavanje, međunarodna recenzija, sažetak, stručni)

376.

Hršak, Damir; Lazić, Ladislav; Štrkalj, Anita; Slokar, Ljerka; Glavaš, Zoran

Industrial Waste Treatment from Holistic Environmentalism Point of View // Proceedings book of Xth International Conference Preparation of Ceramic Materials / Plešingerova, Beatrice ; Sučik, Gabriel ; Hršak, Damir ; Horkavcova, Diana (ur.).
Herl'any: Technical University of Košice, 2013. str. 68-68 (predavanje, međunarodna recenzija, sažetak, stručni)

377.

Malina, Jadranka; Rađenović, Ankica

Potential of metallurgical waste in methylene blue removal // Simpozij Vladimir Prelog / Hadžiev, Andrea ; Blažeković, Zdenko (ur.).
Osijek, 2013. str. 253-253 (poster, domaća recenzija, sažetak, znanstveni)

378.

Kosec, Ladislav; Gojić, Mirko; Kožuh, Stjepan; Kosec, Borut; Dražić, Goran; Šavli, Štefan

The effect of long-term annealing at elevated temperature on microstructure and hardness of heat-resistant steel // Abstract Booklet 15th International Symposium on Metallography / Longauerova, Margita (ur.).
Košice: Department of Materials Science, Faculty of Metallurgy, Technical University of Košice, 2013. str. 94-94 (poster, međunarodna recenzija, sažetak, znanstveni)

379.

Malina, Jadranka; Radošević, Jagoda; Dolić, Natalija; Zovko Brodarac, Zdenka

Passive behaviour of Al-Mg-Si alloy under the influence of chloride ions // Book of Abstracts, 23. hrvatski skup kemičara i kemijskih inženjera / Hadžiev, Andrea ; Blažeković, Zdenko (ur.).
Osijek, Hrvatska, 2013. str. 48-48 (poster, domaća recenzija, sažetak, znanstveni)

380.

Rokhlin, L. A.; Matrosov, D. I.; Mamuzić, Ilija

Effect of Microsegregation on Quantity and Morphology of Secondary Phases During Solidification of Al-Fe-Si Alloys // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 409-409 (poster, međunarodna recenzija, sažetak, znanstveni)

381.

Globa, L. S.; Novogrudskaya, R. L.; Mamuzić, Ilija

Computational resources of Internet portal “Strength of materials” // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 387-387 (poster, međunarodna recenzija, sažetak, znanstveni)

382.

Rađenović, Ankica; Malina, Jelena; Holjevac Grgurić, Tamara

Toplinska analiza komponenti kalupne mješavine // Proceedings book of the 12th International Foundrymen Conference / Dolić, Natalija ; Glavaš, Zoran ; Zovko Brodarac, Zdenka (ur.). (ur.).
Sisak: Faculty of Metallurgy, 2012. (poster, međunarodna recenzija, sažetak, znanstveni)

383.

Holjevac-Grgurić, Tamara; Radoš, Martina; Brnardić, Ivan

Characterization of bentonites for green sand mixtures // Proceedings book of 12th International Foundrymen Conference / Dolić, Natalija ; Glavaš, Zoran ; Zovko Brodarac, Zdenka (ur.).
Sisak: Metalurški fakultet Sveučilišta u Zagrebu, 2012. str. 135-135 (poster, sažetak, znanstveni)

384.

Rešković Stoja

Distribution of Nb precipitates by phase transformation of stee // Distribution of Nb precipitates by phase transformation of stee / Gajović, Andreja ; Tomašić, Nenad (ur.).
Zagreb: Hrvatsko mikroskopsko društvo, 2012. str. 99-101 (predavanje, međunarodna recenzija, sažetak, znanstveni)

385.

Holjevac Grgurić, Tamara; Radoš, Martina; Unkić, Faruk; Grozdanić, Vedrana; Brnardić, Ivan

Characterization and Thermal Stability of Bentonites // POLYCHAR 20 World Forum on Advanced Materials / Rogošić, Marko, Mcana, Jelena (ur.).
Zagreb: Fakultet kemijskog inženjerstva i tehnologije Sveučilišta u Zagrebu, 2012. str. 1-1 (poster, sažetak, znanstveni)

386.

Malina, Jadranka; Ivaniš, Krešimir; Jakovljević, Suzana

Fractographic characteristics of hydrogen charged CSP steel // Book of Abstracts / Gajović, Andreja ; Tomašić, Nenad (ur.).
Zagreb, 2012. str. 88-89 (ostalo, međunarodna recenzija, sažetak, znanstveni)

387.

Malina, Jadranka; Begić Hadžipašić, Anita; Jakopović, Branka

Characterization of coatings on hot dip galvanized steel by optical microscopy // Book of Abstracts / Gajović, Andreja ; Tomašić, Nenad (ur.).
Zagreb, 2012. str. 88-87 (ostalo, međunarodna recenzija, sažetak, znanstveni)

388.

Zovko Brodarac, Zdenka; Mrvar, Primož; Unkić, Faruk

Investigation of AlMg9 alloy microscopic features related to cooling rate // Croatian Microscopy Symposium, Book of Abstract / Gajović, A. ; Tomašić, N. (ur.).
Zagreb: Hrvatsko mikroskopijsko društvo, 2012. str. 37-38 (predavanje, domaća recenzija, sažetak, znanstveni)

389.

Rađenović, Ankica; Malina, Jadranka; Slokar, Ljerka

Citric acid as a modifier of blast furnace sludge // Croatian Microscopy Symposium-Book of Abstracts / Gajović, Andreja ; Tomašić, Nenad (ur.).
Zagreb: Hrvatsko mikroskopijsko društvo, 2012. str. 97-98 (poster, međunarodna recenzija, sažetak, znanstveni)

390.

Rađenović, Ankica; Terzić Katarina

Microstructure of anode butts // 22th Congress of Chemists and Technologists-BOOK of ABSTRACTS / Hadzi Jordanov, Svetomir ; Paunovic, Perica (ur.).
Ohrid, 2012. (poster, međunarodna recenzija, sažetak, znanstveni)

391.

Malina, Jadranka; Rađenović, Ankica; Štrkalj, Anita

Waste mould sand as adsorbent for polluted waters treatment // 22th Congress of Chemists and Technologists of Macedonia, Book of abstracts / Hadzi Jordanov, Svetomir (ur.).
Ohrid: Society of Chemists and Technologists of Macedonia, 2012. str. 184-184 (poster, međunarodna recenzija, sažetak, znanstveni)

392.

Rudenko, N. P.; Ćurćija, D.

Mathematical model of acid etching // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 430-430 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

393.

Momot, J. G.; Devčić, N.

Cost management industry in crisis // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 430-430 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

394.

Sivoplyas, U. V.; Karmazina, L. L.; Križanić, Rade

Knowledge management in project management area at industrial enterprises // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 429-429 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

395.

Sivoplyas, U. V.; Jurković, M.

Internal innovations as intangible project assets of industrial enterprises // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 429-429 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

396.

Dolzhanskiy, A. M.; Mos’pan, N. N.; Ćurćija, D.

Quality evaluation of modeling of virtual experiment // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 429-429 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

397.

Doldzhanskiy, A. M.; Bondarenko, O. A.; Mamuzić, Ilija

Method of quality complex index maximizing for product and process // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 429-429 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

398.

Zhurba, A. A.; Mikhalyov, A. I.; Vitez, Ivan

Fractal analysis of surfaces of penrose // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 429-429 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

399.

Sharabura, Т. А.; Pinchuk, V. A.; Devčić, N.

Ecological aspects of the thermal processing of water-coal fuel // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 429-429 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

400.

Kormanikova, E.; Mamuzić, Ilija

Shear deformation laminate theory used for sandwiches // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 425-425 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

401.

Kormanikova, E.; Mamuzić, Ilija

Optimization of laminates subjected to failure criterion // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 425-425 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

402.

Shlomchak, G.; Mamuzić, Ilija; Sosnev, I.

Materials for modeling of the plastic forming processes of rheologically complex metals with low plasticity // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 423-423 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

403.

Markevich. I. V.; Grigorenko, V. U.; Drojja, P. V.; Križanić, R.

Determination of the radius riding in the uneven distribution of normal contact stresses along the perimeter of the fire // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 420-420 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

404.

Hamidov, F. G.; Mamedov, Z. G.; Rakhmanov, S. R.; Mamuzić, Ilija

Combined deformation and heat treatment of steel with a bainitic structure // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 420-420 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

405.

Pinchuk, S. I.; Balakin, V. F.; Tishkevich. D. G.; Mamuzić, Ilija

The increasing of the corrosion resistance of the tubing // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 419-419 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

406.

Balakin, V. F.; Nikolaenko, J. N.; Solov`eva, I. A.; Sergeeva, O. V.; Jurković, M.

Computer designing оf process production cold-deformed tubes // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 419-419 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

407.

Popov, M. V.; Balakin, V. F.; Perchanik, V. V.; Bilan, K. S.; Mamuzić, Ilija

New scheme of pilger rolling of tubes – a perspective way to obtain the required structure-sensitive properties // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 419-419 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

408.

Rakhmanov, S. R.; Topolov, V. L; Jurković, M.

The dynamics of unsteady processes in helical rolling mill drives // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 419-419 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

409.

Karasik, T. L.; Jurković, M.

Research of sheetings for processing of metals by pressure at heats // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 419-419 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

410.

Zhuravel, V. P.; Karasik, A. O.; Mamuzić, Ilija

Technological processing at hot pressing of pipes // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 419-419 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

411.

Myronova, T. M.; Ruden, D. A.; Mamuzić, Ilija

The influence of matrix structure on the deformed cast irons properties // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 418-418 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

412.

Balakan, M. A.; Mamuzić, Ilija

Effect of plastic deformation on microstructure and poperties of Al-Cu alloy // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 418-418 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

413.

Kuznetsov, D. A.; Mamuzić, Ilija

Effect of fine grained ferrite in surface layers on fatigue behavior of low carbon steel plates // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 418-418 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

414.

Korshunov, Yu. A.; Mamuzić, Ilija

Strain hardening and steady state deformation of Al–Mg alloys // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 418-418 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

415.

Grechishkina, A. M.; Piskun, G. I.; Živković, V.

Transformation of textures in hot rolled microalloyed steel // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 418-418 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

416.

Berezyanko, G. V.; Chukhno, V. Yu.; Mamuzić, Ilija

Behaviour of metal flow in the spreading extrusion process // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 418-418 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

417.

Furmanchuk, V. P.; Šipalo Žuljević, J.

Deformation of aluminium alloy AL20 in semisolid state // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 418-418 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

418.

Tymchenko, V. A.; Sigalov, B. R.; Devčić, N.

Temperature changes occurring during extrusion of metals // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 418-418 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

419.

Borisoglebsky, L. T. : Gordeev, A. S.; Devčić, N.

Fabrication of alumina dispersion strengthened copper strips by internal oxidation and hot rolling // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 418-418 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

420.

Chyorny, A. A.; Demchenko, V. P.; Devčić, N.

Hot plane strain compression testing of aluminium specimens // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 417-417 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

421.

Kuleshov, A. K.; Kucherenko, R. T.; Ćurćija, Dušan

Influence of titanium on hot ductility of C–Mn–Al steels // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 417-417 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

422.

Safargalov, K. M.; Polonsky, M. S.; Jurković, M.

Evolution of microstructure and plastic stability during superplastic flow in a 1201 aluminium alloy // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 417-417 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

423.

Zhmachenko, T. A.; Kristopchuk, F. O.; Mamuzić, Ilija

Computational modelling of effects of roll gap geometry in hot rolling // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 417-417 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

424.

Solov`eva, I. A.; Tereschenko, V. S.; Golubitsky, A. S.; Sergeeva, O. V.; Tkalčić, D.

Prediction planned targets extended periods of melting // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 411-411 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

425.

Rudenko, N. P.; Šipalo Žuljević, J.

Kinetics of cathode processes on iron and steels in acid etchant // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 411-411 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

426.

Gasik, M. I.; Zubov, V. L.; Šipalo Žuljević, J.

Problem questions of physics and chemistry of the concentration of radionuclides in the slag charging materials smelting ferrosilicon // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 410-410 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

427.

Kamkina, L. V.; Stovba, Y. V.; Križanić, R.

Physico-chemical analysis of nonequilibrium phase interactions in obtaining high-carbon ferromanganese // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 410-410 (poster, sažetak, znanstveni)

public.carnet.hr

428.

Naumov, O. S.; Fomenko, G. V.; Ćurćija, D.

Working out of structures of astringents compositions with use of a waste of a metallurgical complex // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 410-410 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

429.

Rybalchenko, M. A.; Golovko, V. I.; Devčić, N.

Management features by the processes of mixing of materials on a conveyer // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 410-410 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

430.

Repyakh, S. I.; Mamuzić, Ilija

Wax model for casting // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 410-410 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

431.

Usenko, R. V.; Tkalčić, D.

Viscosity phosphate slurry to produce ceramic shell molds // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 410-410 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

432.

Zhegur, A. A.; Repyakh, S. I.; Šipalo Žuljević, J.

On reducing the cost of preparation of ceramic shell molds for casting // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 409-409 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

433.

Kalinin, V. T.; Syslo, N. V.; Vitez, Ivan

Studies on the use in the manufacture of iron nano-modifier grinding balls // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 409-409 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

434.

Kiriya, R. V.; Braginec, D. D.; Tkalčić, D.

Adaptive control by an usrednyayushim bunker working in the conditions of coal mines // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 409-409 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

435.

Gubenko, Sv.; Križanić, R.

Melting and crystallization of non-metallic inclusions under laser treatment of steels // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 409-409 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

436.

Karpov, V. V.; Karpov, V. U.; Vitez, Ivan

Reception of cast porous alloys – gazers // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 409-409 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

437.

Pankov, R. V.; Mamuzić, Ilija

Structural transformation during the heat treatment of chromium coatings // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 400-400 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

438.

Polyakova, N.; Boyko, M.; Mamuzić, Ilija

The influence structural peculiarities of high-chromium cast iron on it’s quality as wear-resistance material // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 400-400 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

439.

Kavats, A. A.; Devčić, N.

Modelling of microstructure formation of metallic alloys with external vibro influence // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 400-400 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

440.

Synytsina, Yu. P.; Ćurćija, D.

The metallographic analysis of iron sulfide thin films which have been obtained using high-speed evaporation method // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 400-400 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

441.

Rudenko, N. P.; Shevchenko, G. I.; Vitez, I.

Оn structural transformations of silicon carbide in aluminosilicate media under heating // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 400-400 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

442.

Myronova, T. M.; Devčić, N.

The use of carbide transformations for white cast irons ductility improvement // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 400-400 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

443.

Seliverstov, V. U.; Loevskaya, A. A.; Jurković, M.

Prospects for the use of recycled iron-man-made origin of cold-forming mixtures // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 399-399 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

444.

Movchan, A.; Mamuzić, Ilija

Formation of three-phase composite materials of ferritic iron alloys by carburization // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 399-399 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

445.

Levko, O.; Kylyvnyk, K.; Ćurćija, D.

The electrochemical properties of LiMn₂O₄ electrodes deposited by the hpvds method of condensation – solidification // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 399-399 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

446.

Galushko, I. M.; Danilenko, V. A.; Mamuzić, Ilija

Criterion for peritectic reaction // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 399-399 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

447.

Galushko, I. M.; Dvornikova, K. A.; Jurković, M.

Calculation of the number of phase constituents in peritectic systems with separate crystallization of phases // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 399-399 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

448.

Mazorchuk, V. F.; Mamuzić, Ilija

Research of the microstructure of cast metal obtained by using floating top insert // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 399-399 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

449.

Kalinina, N. Ju.; Šipalo Žuljević, J.

Methods of identification of the structural components of alloys on their color images // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 399-399 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

450.

Gul, Iurii; Chmeleva, V.; Mamuzić, Ilija

Efficiency of use of stationary and non-stationary coolers at heat treatment of metal products: theory and directions of practical use // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 398-398 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

451.

Ivchenko, Z. A.; Lunev, V.V.; Križanić, R.

Factors of the mechanical properties of cast titanium alloy VT5L (VT5L-MS) // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 398-398 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

452.

Malinovsky, L. F.; Križanić, R.

Stress induced martensite transformation texture in austenitic stainless steel // Summaries of lectures of the 10^th international simposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 398-398 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

453.

Chumachenko, L. K.; Mamuzić, Ilija

Study on effect of residual stress distributions on kinetics of static strain aging after cold rolling // Summaries of lectures of the 10^th international simposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 398-398 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

454.

Blumkin, G. M.; Jakšić, D.

Influence of homogenisation treatment on microstructure and hot ductility of aluminium alloy AL 27. // Summaries of lectures of the 10^th international simposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 398-398 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

455.

Baumshtein, D. V.; Mamuzić, Ilija

Mechanical behaviour of stainless steel under warm working conditions // Summaries of lectures of the 10^th international simposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 398-398 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

456.

Korshunov, P. I.; Shishkov, G. L.; Jakšić, D.

Effect of heat treatment on fatigue of aluminium alloy // Summaries of lectures of the 10^th international simposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 397-397 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

457.

Shorshorov, E. I.; Mamuzić, Ilija

Effect of sulphur on impact properties of bainitic or martensitic steels // Summaries of lectures of the 10^th international simposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 397-397 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

458.

Marchuk, P. I.; Mirovich, O. P.; Jakšić, D.

Effect of thermomechanical treatment on flow behaviour, microstructure and texture development of aluminium alloy in semisolid state // Summaries of lectures of the 10^th international simposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 397-397 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

459.

Mitrofanov, H. L.; Jakšić, D.

Failure of ultra high strength low alloy steel // Summaries of lectures of the 10^th international simposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 396-396 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

460.

Gotsman, D. M.; Mamuzić, Ilija

Effect of austenite grain size on isothermal bainite transformation in low carbon microalloyed steel // Summaries of lectures of the 10^th international simposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 396-396 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

461.

Datsenko, Yu. I.; Jakšić, D.

Processing, microstructure, and properties of Mg–SiC composites // Summaries of lectures of the 10^th international simposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 395-395 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

462.

Gudyma, M. I.; Jakšić, D.

Behaviour of binary Al–2Li alloy at high temperature, high strain forging // Summaries of lectures of the 10^th international simposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 395-395 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

463.

Derkach, A. S.; Mishakov, A. L; Jakšić, D.

Computer modelling of dendritic grain structures // Summaries of lectures of the 10^th international simposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 395-395 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

464.

Krivsha, M. A.; Machulenko, L. I.; Mamuzić, Ilija

Microstructure and mechanical properties of a Ti–14Mo based beta titanium alloy // Summaries of lectures of the 10^th international simposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 395-395 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

465.

Safargallin, L. M.; Mamuzić, Ilija

Microstructure and tensile properties of 8Cr–1, 5Mo steel // Summaries of lectures of the 10^th international simposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 395-395 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

466.

Rabinovitch, A. M.; Chushko, P. I.; Živković, V.

Rejuvenation process for nickel base superalloys // Summaries of lectures of the 10^th international simposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 395-395 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

467.

Mayevsky, G. V.; Živković, V.

Microstructure and mechanical properties of C–Si–Mn steels after simulated thermomechanical processing // Summaries of lectures of the 10^th international simposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 394-394 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

468.

Goshovsky, V. O.; Potyomkin, S. M.; Šipalo Žuljević, J.

Influence of nitriding on fatigue strength of chromium-molybdenum steels // Summaries of lectures of the 10^th international simposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 394-394 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

469.

Marchenko, L. I.; Ćurćija, D.

Effect of alumina particle size and thermal condition of casting on microstructure and mechanical properties of stir cast Al-Al₂O₃ composites // Summaries of lectures of the 10^th international simposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 394-394 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

470.

Fomichev, S. L.; Ćurćija, D.

Mechanical properties and microstructure of high strength bainitic steels // Summaries of lectures of the 10^th international simposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 393-393 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

471.

Timofeev, N. M.; Šipalo Žuljević, J.

Flow transitions in vacuum arc remelting // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 393-393 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

472.

Andronov, I. N.; Ćurćija, D.

Hydrogen embrittlement of shipbuilding steel in sea water // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 393-393 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

473.

Prityka, М. L.; Yatsenko, P. I.; Šipalo Žuljević, J.

Shear ligament phenomena in Al–Si alloys // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 393-393 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

474.

Kucherenko, B. A.; Bilozir, L. M; Živković, V.

Effect of phosphorus on modification of eutectic silicon in Al–Si–Mg alloy // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 393-393 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

475.

Kuroles, L. M.; Pyontkovsky, F. K.; Živković, V.

Degradation of microstructure in plain and platinum aluminide coatings on superalloy ZhS6U during isothermal oxidation // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 392-392 (poster, sažetak, znanstveni)

pubweb.carnet.hr

476.

Chushkov, A. P.; Šipalo Žuljević, J.

The overaging kinetics of Al–Zn–Mg–Cu alloy // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 392-392 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

477.

Serenbogen, S. P.; Mashtalir, P. I.; Ćurćija, D.

Structure and microtexture changes during solution nitriding in ferritic–austenitic stainless steel // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 392-392 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

478.

Zvereva, V. M.; Jurković, M.

Fatigue performance and microanalysis of heat treated KhN35VT stainless steel // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 391-391 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

479.

Shtorm, A. A.; Zapashnaya, I. S.; Trusevitch, G. I.; Mamuzić, Ilija

Cast and aged structures of heat resistant steel solidified in an electromagnetic field and under different cooling conditions // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 391-391 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

480.

Belobrov, N. A.; Jurković, N.

Prediction of embrittlement during aging of stainless steel welds // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 391-391 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

Pregled po znanstvenom području: Metalurgija (MB: 2.08)

Sažeci sa skupova

Sažeci u zbornicima i časopisima