Pregled po projektu: Primjena tehnologija inkrementalnog oblikovanja u individualnoj proizvodnji izradaka iz naprednih polimernih materijala (MB: NadSve-Sveučilište u Rijeci-uniri-tehnic-18-100)
Pronađeno 10 radova
-
1.Janeš, Gordan; Ištoković, David; Jurković, Zoran; Perinić, MladenApplication of Modified Steady-State Genetic Algorithm for Batch Sizing and Scheduling Problem with Limited Buffers // Applied sciences (Basel), 12 (2022), 22; 11512, 12 doi:10.3390/app122211512 (međunarodna recenzija, članak, znanstveni)
-
2.Hozdić, Elvis; Kendić, Sulejman; Jurković, ZoranComplex Adaptive Manufacturing System Concept as a Cyber-Physical System: Solutions to the Covid – 19 Pandemic Challenges // Cyber-Physical Systems Solution to Pandemic Challenges / Semwal, Tushar ; Iqbal, Faiz (ur.).
Boca Raton (FL): CRC Press ; Taylor & Francis, 2022. str. 129-157 doi:10.1201/9781003186380 -
3.Hozdić, Elvis; Jurković, ZoranThe Electro-Pneumatic System as a Cyber - Physical System: The Concept // New Technologies, Development and Application IV. NT 2021 / Karabegović, I. (ur.)., 2021. str. 239-250 doi:10.1007/978-3-030-75275-0_28
-
4.Ištoković, David; Perinić, Mladen; Borić, AndrejDetermining the Minimum Waiting Times in a Hybrid Flow Shop Using Simulation-Optimization Approach // Tehnicki vjesnik - Technical Gazette, 28 (2021), 2; 568-575 doi:10.17559/tv-20210216132702 (međunarodna recenzija, članak, znanstveni)
-
5.Ištoković, David; Perinić, Mladen; Vlatković, Maja; Brezočnik, MiranMinimizing Total Production Cost in a Hybrid Flow Shop: a Simulation-Optimization Approach // International Journal of Simulation Modelling, 19 (2020), 4; 559-570 doi:10.2507/ijsimm19-4-525 (međunarodna recenzija, članak, znanstveni)
-
6.Brlić, Tin; Rešković, Stoja; Jurkovic, Zoran; Janes, GordanMathematical modeling of influence parameters during formation and propagation of the Lüders bands // Facta Universitatis-Series Mechanical Engineering, 18 (2020), 4; 595-610 doi:10.22190/FUME200416041B (međunarodna recenzija, članak, znanstveni)
-
7.Ištoković, David; Perinić, Mladen; Jurković, ZoranMinimizing the makespan in the flowshop with sequence-dependent setup times: simulation approach // Proceedings of 9th International Conference "Mechanical Technologies and Structural Materials" MTSM 2019 / Jozić, Sonja ; Lela, Branimir (ur.).
Split: Croatian Society for Mechanical Technologies, 2019. str. 77-82 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
8.Borić, Andrej; Kalendová, Alena; Urbanek, Michal; Pepelnjak, TomažCharacterisation of Polyamide (PA)12 Nanocomposites with Montmorillonite (MMT) Filler Clay Used for the Incremental Forming of Sheets // Polymers, 11 (2019), 8; 1248, 20 doi:10.3390/polym11081248 (međunarodna recenzija, članak, znanstveni)
-
9.Ištoković, David; Perinić, Mladen; Doboviček, Sandro; Bazina, TomislavSimulation framework for determining the order and size of the product batches in the flow shop: A case study // Advances in production engineering & management, 14 (2019), 2; 166-176 doi:10.14743/apem2019.2.319 (međunarodna recenzija, članak, znanstveni)
-
10.Hozdic, Elvis; Jurkovic, ZoranCybernetization of Industrial Product-Service Systems in Network Environment // New Technologies, Development and Application / Karabegovic, Isak (ur.)., 2019. str. 262-270 doi:10.1007/978-3-319-90893-9
