Pregled po projektu: Procjena ponašanja konstrukcija u graničnim uvjetima rada (STRUBECON) (MB: IP-2013-11-6876)
Pronađeno 88 radova
-
1.Brnić, Josip; Vukelić, GoranExperimental determination of material mechanical properties and modeling of material behaviour in special environmental conditions // Proceedings of the 6th. European Conference on Computational Mechanics (Solids, Structures and Coupled Problems) ECCM 6 and 7th. European Conference on Computational Fluid Dynamics ECFD 7 / Owen, Roger ; de Borst, Rene ; Reese, Jason ; Pearce, Chris (ur.).
Barcelona: International Center for Numerical Methods in Engineerin (CIMNE), 2019. str. 4361-4367 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
2.Vukelić, Goran; Brnić, JosipUsing experimental and numerical characterization in comparing marine exhaust system stainless steels // Proceedings of the 6th. European Conference on Computational Mechanics (Solids, Structures and Coupled Problems) ECCM 6 and 7th. European Conference on Computational Fluid Dynamics ECFD 7 / Owen, Roger ; de Borst, Rene ; Reese, Jason ; Pearce, Chris (ur.).
Barcelona: International Center for Numerical Methods in Engineerin (CIMNE), 2019. str. 4423-4431 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
3.Brnić, Josip; Kršćanski, Sanjin; Brčić, MarinoComparison of the mechanical behavior of materials subjected to specific operating conditions // IOP conference series. Materials science and engineering, 378 (2018), 1; 35-40 doi:10.1088/1757-899X/378/1/012007 (međunarodna recenzija, članak, znanstveni)
-
4.Brčić, Marino; Čanađija, Marko; Brnić, JosipImperfections in carbon nanotubes structure and their impact on the basic mechanical properties // IOP conference series. Materials science and engineering, 378 (2018), 30-34 doi:10.1088/1757-899x/378/1/012006 (međunarodna recenzija, članak, ostalo)
-
5.Turkalj, Goran; Lanc, Domagoj; Banić, Damjan; Kvaternik, SandraFinite element analysis of thin-walled functionally graded open section beams exposed to thermal loading // 4th International Conference on Mechanics of Composites - BOOK OF ABSTRACTS / Ferreira, A. J. M. ; Santiuste, Carlos (ur.).
Madrid: Universidad Carlos III de Madrid, Spain, 2018. str. 33-33 (predavanje, međunarodna recenzija, sažetak, znanstveni) -
6.Lanc, Domagoj; Kršćanski, Sanjin; Turkalj, GoranCreep buckling analysis of the functionally graded beam // 4th International Conference on Mechanics of Composites - BOOK OF ABSTRACTS / Ferreira, A. J. M. ; Santiuste, Carlos (ur.).
Madrid: Universidad Carlos III de Madrid, Spain, 2018. str. 32-32 (predavanje, međunarodna recenzija, sažetak, znanstveni) -
7.Banić, Damjan; Turkalj, Goran; Lanc, DomagojLarge displacement analysis of laminated composite frames considering shear deformation effects // 4th International Conference on Mechanics of Composites - BOOK OF ABSTRACTS / Ferreira, A. J. M. ; Santiuste, Carlos (ur.).
Madrid: Universidad Carlos III de Madrid, Spain, 2018. str. 7-7 (predavanje, međunarodna recenzija, sažetak, znanstveni) -
8.Brnić, Josip; Brčić, Marino; Kršćanski, Sanjin; Lanc, Domagoj; Niu, Jitai; Wang, PengSteel 51CrV4 under high temperatures, short- time creep and high cycle fatigue // Journal of constructional steel research, 147 (2018), 468-476 doi:10.1016/j.jcsr.2018.05.008 (međunarodna recenzija, članak, znanstveni)
-
9.Brnić, JosipAnalysis of Engineering Structures and Material Behavior. Chichester: John Wiley & Sons, 2018 (monografija)
-
10.Turkalj, Goran; Lanc, Domagoj; Banić, Damjan; Brnić, Josip; Vo, Thuc P.A shear-deformable beam model for stability analysis of orthotropic composite semi-rigid frames // Composite structures, 189 (2018), 648-660 doi:10.1016/j.compstruct.2018.01.105 (međunarodna recenzija, članak, znanstveni)
-
11.Čanađija, Marko; Munjas, NevenA Multiscale Framework for Thermoplasticity // Multiscale modeling of heterogeneous structures / Sorić, Jurica ; Wriggers, Peter ; Allix, Olivier (ur.).
Cham: Springer, 2018. str. 329-345 doi:10.1007/978-3-319-65463-8_16 -
12.Munjas, Neven; Čanađija, Marko; Brnić, JosipThermo-Mechanical Multiscale Modeling in Plasticity of Metals Using Small Strain Theory // Journal of mechanics, 34 (2018), 5; 579-589 doi:10.1017/jmech.2017.37 (međunarodna recenzija, članak, znanstveni)
-
13.Brčić, Marino; Čanađija, Marko; Brnić, JosipInfluence of imperfections on double walled carbon nanotube mechanical properties // ANM2017, 9th International Conference on Advanced Nano Materials
Aveiro, Portugal, 2017. str. 17397-17403 doi:10.1016/j.matpr.2018.06.041 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
14.Kvaternik, Sandra; Turkalj, Goran; Lanc, DomagojNumerical Buckling Analysis of Thin-walled Frames with Joint Effect // Book of Extended Abstracts – My First Conference 2017. / Kvaternik, Sandra ; Torbarina, Fran ; Vitali, Natalija ; Čanađija, Marko ; Travaš, Vanja ; Vukelić, Goran (ur.).
Rijeka: Tehnički fakultet u Rijeci, 2017. str. 29-30 (predavanje, domaća recenzija, sažetak, znanstveni) -
15.Kvaternik, Sandra; Turkalj, Goran; Lanc, DomagojAnalysis of flexure, torsion and buckling of thin-walled frames with a focus on the joint warping behaviour // Transactions of FAMENA, 41 (2017), 4; 1-10 doi:10.21278/TOF.41401 (međunarodna recenzija, članak, znanstveni)
-
16.Čanađija, Marko; Brčić, MarinoUtjecaj efekta malih veličina na mehaničko ponašanje ugljičnih nanocijevi // Osmi susret Hrvatskog društva za mehaniku / Penava, Davorin ; Guljaš, Ivica ; Bošnjak Klečina, Mirjana (ur.).
Osijek: Hrvatsko društvo za mehaniku (HDM), 2017. str. 27-30 (predavanje, domaća recenzija, kratko priopćenje, znanstveni) -
17.Čanađija, Marko; Munjas, Neven; Brnić, JosipOn homogenization in finite strain thermoplasticity // Book of Abstracts. COMPUTATIONAL PLASTICITY XIV - Fundamentals and Applications / Onate, E. ; Owen, D.R.J. ; Peić, D., Chiumenti, M. (ur.).
Barcelona: International Center for Numerical Methods in Engineering (CIMNE), 2017. 174, 1 (predavanje, međunarodna recenzija, sažetak, znanstveni) -
18.Barretta, Raffaele; Brčić, Marino; Čanađija, Marko; Luciano, Raimondo; Marotti de Sciarra, FrancescoApplication of gradient elasticity to armchair carbon nanotubes: Size effects and constitutive parameters assessment // European Journal of Mechanics - A/Solids, 65 (2017), 1-13 doi:10.1016/j.euromechsol.2017.03.002 (međunarodna recenzija, članak, znanstveni)
-
19.Banić, Damjan; Bacciocchi, Michele; Tornabene, Francesco; Ferreira, AntonioInfluence of Winkler-Pasternak Foundation on the Vibrational Behavior of Plates and Shells Reinforced by Agglomerated Carbon Nanotubes // Applied Sciences-Basel, 7 (2017), 12; 1228, 55 doi:10.3390/app7121228 (međunarodna recenzija, članak, znanstveni)
-
20.Banić, Damjan; Lanc, Domagoj; Kvaternik, SandraCreep analysis of elastic beams under constant torque // Мachines. Technologies. Materials, XI (2017), 5/2017; 229-232 (podatak o recenziji nije dostupan, članak, znanstveni)
-
21.Kvaternik, Sandra; Turkalj, Goran; Banić, DamjanFinite element analysis of torsional-flexural behaviour of thin-walled frame considering joint warping conditions // Trans&Motauto World, II (2017), 5/2017; 181-183 (podatak o recenziji nije dostupan, članak, znanstveni)
-
22.Vo, Thuc P.; Thai Huu-Tai; Nguyen Trung-Kien; Lanc, Domagoj; Karamanli, ArmaganFlexural analysis of laminated composite and sandwich beams using a four-unknown shear and normal deformation theory // Composite structures, 176 (2017), 388-397 doi:10.1016/j.compstruct.2017.05.041 (međunarodna recenzija, članak, znanstveni)
-
23.Turkalj, Goran; Lanc, Domagoj; Banić, Damjan; Brnić, JosipA shear-flexible beam model for large displacement analysis of composite beam-type structures // MECHCOMP3: 3rd International Conference on Mechanics of Composites / Ferreira, Antonio J. M. ; Viola ; Erasmo ; Tornabene, Francesco ; Fantuzzi, Nicholas (ur.).
Bolonja: Societa Editrice Esculapid, 2017. str. 18-19 (predavanje, međunarodna recenzija, sažetak, znanstveni) -
24.Vukelić, Goran; Brnić, JosipExperimental and Computational Analysis of Pressure Reducer Failure // CFRAC 2017, International Conference on Computational Fracture and Failure of Materials and Structures, Book of Abstracts / Moes, Nicolas ; Oliver, Xavier ; Jirasek, Milan ; Allix, Olivier (ur.).
Nantes: Ecole Centrale de Nantes, 2017. str. 145- (predavanje, međunarodna recenzija, sažetak, znanstveni) -
25.Vukelić, Goran; Brnić, JosipNumerical prediction of fracture behavior for austenitic and martensitic stainless steels // International Journal of Applied Mechanics, 9 (2017), 4; 1750052-1 doi:10.1142/S1758825117500521 (međunarodna recenzija, članak, znanstveni)
-
26.Brnić, Josip; Kršćanski, Sanjin; Lanc, Domagoj; Brčić, Marino; Turkalj, Goran; Čanađija, Marko; Niu, JitaiAnalysis of the Mechanical Behavior, Creep Resistance and Uniaxial Fatigue Strength of Martensitic Steel X46Cr13 // Materials, 10 (2017), 4; 388-406 doi:10.3390/ma10040388 (međunarodna recenzija, članak, znanstveni)
-
27.Čanađija, Marko; Brčić, Marino; Brnić, JosipElastic properties of nanocomposite materials: influence of carbon nanotube imperfections and interface bonding // Meccanica, 52 (2017), 7; 1655-1668 doi:10.1007/s11012-016-0516-x (međunarodna recenzija, članak, znanstveni)
-
28.Vukelić, Goran; Brnić, JosipMarine Shaft Steels (AISI 4140 and AISI 5120) Predicted Fracture Toughness by FE Simulation // Materials Science-Medziagotyra, 23 (2017), 1; 16-20 doi:10.5755/j01.ms.23.1.13823 (međunarodna recenzija, članak, znanstveni)
-
29.Vukelić, Goran; Brnić, JosipNumerically Predicted J-integral as a Measure of Crack Driving force for Steels 1.7147 and 1.4762 // Journal of Theoretical and Applied Mechanics, 55 (2017), 2; 659-666 doi:10.15632/jtam-pl.55.2.659 (međunarodna recenzija, članak, znanstveni)
-
30.Brnić, Josip; Turkalj, Goran; Kršćanski, Sanjin; Vukelić, Goran; Čanađija, MarkoUniaxial Properties versus Temperature, Creep and Impact Energy of an Austenitic Steel // High temperature materials and processes, 36 (2017), 2; 135-143 doi:10.1515/htmp-2015-0174 (međunarodna recenzija, članak, znanstveni)
-
31.Turkalj, Goran; Lanc, Domagoj; Brnić, Josip; Banić, DamjanNumerical simulation of instability behaviour of composite semi-rigid frames using a shear flexible thin-walled beam element // Proceedings of 2nd International Conference on Mechanics of Composites / Ferreira, A.J.M. ; Neves, A.M.A. ; Viola, E. ; Tornabene, F ; Fantuzzi, N. (ur.).
Bolonja: Societa Editrice Esculapio, 2016. str. 120-120 (predavanje, međunarodna recenzija, sažetak, znanstveni) -
32.Lanc, Domagoj; Turkalj, Goran; Vo, P. Thuc; Pešić, IgorGlobal buckling analysis of thin-walled functionally graded box beams // Proceedings of 2nd International Conference on Mechanics of Composites / Ferreira, A.J.M. ; Neves, A.M.A. ; Viola, E. ; Tornabene, F ; Fantuzzi, N. (ur.).
Bolonja: Societa Editrice Esculapio, 2016. str. 32-32 (predavanje, međunarodna recenzija, sažetak, znanstveni) -
33.Brčić, Marino; Čanađija, Marko; Brnić, JosipInfluence of imperfections on carbon nanotube properties // PROCEEDINGS OF THE 8TH INTERNATIONAL CONFERENCE ON PHYSICAL AND NUMERICAL SIMULATION OF MATERIALS PROCESSING / Zeng, Jianmin ; Sun, Dongke ; Han, Qingyou (ur.).
Seattle (WA): Purdue University Press, 2016. str. 85-85 (pozvano predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
34.Čanađija, Marko; Munjas, Neven; Brnić, JosipA multiscale approach to thermoplastic deformation // Book of Abstracts of Joint Annual Meeting of DMV-GAMM 2016
Braunschweig, 2016. str. 857-858 (predavanje, međunarodna recenzija, sažetak, znanstveni) -
35.Čanađija, Marko; Munjas, Neven; Brnić, JosipA multiscale approach to thermoplastic deformation // PAMM : Proceedings in applied mathematics and mechanics, 16 (2016), 435-436 (podatak o recenziji nije dostupan, članak, znanstveni)
-
36.Čanađija, Marko; Mosler, JoernA variational formulation for thermomechanically coupled low cycle fatigue at finite strains // International journal of solids and structures, 100/101 (2016), 388-398 doi:10.1016/j.ijsolstr.2016.09.009 (međunarodna recenzija, članak, znanstveni)
-
37.Čanađija, MarkoA Multiscale Approach to Thermoplasticity // Multiscale modelling of heterogenous structures, MUMO 2016 / Sorić, Jurica ; Allix, O. ; Wriggers, Peter (ur.).
Dubrovnik, Hrvatska, 2016. (pozvano predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
38.Mihelčić, IvanAnaliza nosivosti čeličnog rešetkastog stupa za dalekovode 35 kV metodom konačnih elemenata, 2016., diplomski rad, preddiplomski, Tehnički fakultet, Rijeka
-
39.Vidoš, MatijaProračun nosača kranske staze mosne dizalice nosivosti 350 kN, 2016., diplomski rad, preddiplomski, Tehnički fakultet, Rijeka
-
40.Ugljarević, TomislavStatička analiza čeličnog rešetkastog stupa za dalekovode 10 kV metodom konačnih elemenata, 2016., diplomski rad, preddiplomski, Tehnički fakultet, Rijeka
-
41.Sikirica AnteStatička analiza čeličnog rešetkastog stupa dalekovoda 20 kV metodom konačnih elemenata, 2016., diplomski rad, preddiplomski, Tehnički fakultet, Rijeka
-
42.Čanađija, Marko; Munjas, Neven; Brnić, JosipA multiscale approach to thermoplastic deformation // PAMM : Proceedings in applied mathematics and mechanics, 16 (2016), 1; 435-436 doi:10.1002/pamm.201610206 (podatak o recenziji nije dostupan, članak, znanstveni)
-
43.Čanađija, Marko; Munjas, Neven; Brnić, JosipA multiscale approach to thermoplastic deformation // Book of Abstracts, GAMM Conference / Bach, V ; Ehlers, W. (ur.).
Braunschweig: DMV & GAMM, 2016. str. 857-858 (predavanje, međunarodna recenzija, sažetak, znanstveni) -
44.Pešić, Igor; Lanc, Domagoj; Turkalj, GoranNelinearna analiza toplinskog izvijanja tankostjenih greda // Zbornik radova Sedmog susreta Hrvatskoga društva za mehaniku / Marović, Pavao ; Galić, Mirela ; Krstulović-Opara, Lovre (ur.).
Split: Hrvatsko društvo za mehaniku (HDM), 2016. str. 163-168 (predavanje, domaća recenzija, cjeloviti rad (in extenso), ostalo) -
45.Banić, Damjan; Turkalj, Goran; Lanc, DomagojAnaliza elasto-plastičnih grednih nosača pri uvijanju s ograničenim vitoperenjem // Zbornik radova Sedmog susreta Hrvatskoga društva za mehaniku / Marović, Pavao ; Galić, Mirela ; Krstulović-Opara, Lovre (ur.).
Split: Hrvatsko društvo za mehaniku (HDM), 2016. str. 19-24 (predavanje, domaća recenzija, cjeloviti rad (in extenso), znanstveni) -
46.Brnić, Josip; Čanađija, Marko; Turkalj, Goran; Kršćanski, Sanjin; Lanc, Domagoj; Brčić, Marino; Zeng, GaoShort-Time Creep, Fatigue and Mechanical Properties of 42CrMo4 - Low Alloy Structural Steel // Steel and composite structures, 22 (2016), 4; 875-888 doi:10.12989/scs.2016.22.4.875 (međunarodna recenzija, članak, znanstveni)
-
47.Banić, Damjan; Turkalj, Goran; Brnić, JosipFinite element stress analysis of elastic beams under non-uniform torsion // Transactions of FAMENA, 40 (2016), 2; 71-82 doi:10.21278/TOF.40206 (međunarodna recenzija, članak, znanstveni)
-
48.Lanc, Domagoj; Turkalj, Goran; Vo, Thuc P.; Brnić, JosipNonlinear buckling behaviours of thin-walled functionally graded open section beams // Composite structures, 152 (2016), 829-839 doi:10.1016/j.compstruct.2016.06.023 (međunarodna recenzija, članak, znanstveni)
-
49.Pešić, Igor; Lanc, Domagoj; Turkalj, GoranNon-linear global stability analysis of thin-walled laminated beam-type structures // Computers & structures, 173 (2016), 19-30 doi:10.1016/j.compstruc.2016.05.015 (međunarodna recenzija, članak, znanstveni)
-
50.Anđelić, Nikola; Žigulić, Roberto; Čanađija, MarkoOn the influence of thermal stresses on eigenvalues of a circular saw blade // Journal of Mechanical Engineering Science, Part C : Proceedings of the Institution of Mechanical Engineers, 231 (2016), 96-108 doi:10.1177/0954406216641148 (međunarodna recenzija, članak, znanstveni)
