Pregled po projektu: Oblikovanje deformiranjem i svojstva novih metalnih materijala (MB: MZOS-120-1201787-1491)

1.

Bukhanovsky, V.; Rudnitsky, N.; Mamuzić, Ilija

Sloistie elektrokontaknie materiali na osnove medi, hroma i volframa : tehnologija polučenia, struktura, mehaničeskie i služebnie svojstva. Saarbrücken: Lambert Academic Publishing, 2012 (monografija)

2.

Mamuzić, Ilija

Metalurgija, uvijek prosperitet za čovječanstvo. Zagreb: Hrvatsko metalurško društvo, 2012 (monografija)

1.

Mihok, L.; Mamuzić, Ilija

Beginnings of iron metallurgy on territories of Croatia and Slovakia // Carpatica - Karpatika / Vegeš, M. M. et al. (ur.).
Užgorod: Vydavnyctvo UŽNU, 2008. str. 3-14

2.

Budić, Ivan; Vitez, Ivan; Marušić, Vlatko

Residual stresses in iron castings // DAAAM International Scientific Book 2007 / Katalinić, Branko (ur.).
Beč: DAAAM International Vienna, 2007. str. 561-568

1.

Oruč, Mirsada; Muhamedagić, Sulejman; Vitez, Ivan

Metode kontrole procesa i proizvoda - Metalurgija - / Čičak, Faik (ur.).
Zenica: Univerzitet u Zenici, Fakultet za metalurgiju i materijale Zenica, 2011

2.

Vitez, Ivan; Kladarić, Ivica; Marušić, Vlatko

Osnove proizvodnje i sustavi označivanja metala / - (ur.).
Slavonski Brod: Strojarski fakultet Sveučilišta u Slavonskom Brodu, 2008

1.

Kunčicka, L.; Štěpan, P.; Kliber, J.; Mamuzić, Ilija

Influence of heat treatment on properties of ti-nb alloys // Metalurgija, 53 (2014), 2; 186-188 (međunarodna recenzija, članak, znanstveni)

2.

Ćurčija, Dušan; Mamuzić, Ilija

Modelling of the lubricant-layer thickness on a mandrel during rolling seamless tubings // Materiali in tehnologije, 47 (2013), 5; 551-555 (međunarodna recenzija, članak, znanstveni)

mit.imt.si

3.

Prokhorenko, V. M.; Perepichay, A. O.; Mamuzić, Ilija; Čikić, A.

Reduction of longitudinal axial residual stresses in near-root region of circumferential joint of steam pipeline in technological way // Metalurgija, 52 (2013), 4; 449-452 (međunarodna recenzija, članak, znanstveni)

public.carnet.hr

4.

Ćurčija, Dušan; Vodopivec, Franc; Mamuzić, Ilija

Calculation of the lubricant layer for a coarse surface of a band and rolls // Materiali in tehnologije, 47 (2013), 1; 53-57 (međunarodna recenzija, članak, znanstveni)

mit.imt.si

5.

Brezinová, J.; Guzanová, A.; Mamuzić, Ilija

Study of wear resistance of coatings deposited by high velocity oxygen fuel (hvof) technology // Acta metallurgica Slovaca, 18 (2012), 1; 20-27 (međunarodna recenzija, članak, znanstveni)

www.ams.tuke.sk

6.

Fabík, R.; Kliber, J.; Mamuzić, Ilija; Kubina, T. S. A. Aksenov

Mathematical modelling of flat and long hot rolling based on finite element methods (FEM) // Metalurgija, 51 (2012), 3; 341-344 (međunarodna recenzija, pregledni rad, znanstveni)

hrcak.srce.hr

7.

Michel, J.; Buršák, M.; Mamuzić, I.

Degradation of mechanical properties of CrMo creep resistant steel operating under conditions of creep // METALURGIJA, 51 (2012), 1; 79-82 (podatak o recenziji nije dostupan, prethodno priopćenje, znanstveni)

public.carnet.hr public.carnet.hr

8.

Bukhanovs’kyi, V. V.; Rudnyts’kyi, M. P.; Kharchenko, V. V.; Minakova, R. V.; Grechanyuk M. I.; Mamuzić, Ilija

Relationship between composition, structure, and mechanical properties of a condensed composite of copper–tungsten system // Strength of materials, 43 (2011), 4; 426-432 (međunarodna recenzija, članak, znanstveni)

www.springerlink.com

9.

Nemet, Miroslav; Mihalikova, Maria; Mamuzić, Ilija

Porovnanie pevnostanych a deformačnych charakteristyk plechov použivanych v automobilovom priemysle // Chemicke listy, 105 (2011), S.I. 15; s549-s551 (međunarodna recenzija, članak, znanstveni)

www.chemicke-listy.cz

10.

Ćurčija, Dušan; Vodopivec, Franc; Mamuzić, Ilija

Similarity criteria and effect of lubricant inertia at cold rolling // Materiali in tehnologije, 45 (2011), 1; 75-80 (međunarodna recenzija, članak, znanstveni)

www.imt.si

11.

Bukhanovskii, V.V.; Minakova, R.V.; Grechanyuk, I.N.; Mamuzić, Ilija; Rudnitskii, N.P.

Effect of composition and heat treatment on the structure and properties of condensed composites of the Cu – W system // Metal science and heat treatment, 53 (2011), 1-2; 14-23 doi:10.1007/s11041-011-9334-x (međunarodna recenzija, članak, znanstveni)

doi www.springerlink.com

12.

Bukhanovsky, V.V.; Grechanyuk, N.I.; Minakova, R.V.; Mamuzić, Ilija; Kharchenko, V.V.; Rudnitsky, N.P.

Production technology, structure and properties of Cu–W layered composite condensed materials for electrical contacts // International journal of refractory metals & hard materials, 29 (2011), 5; 573-581 doi:10.1016/j.ijrmhm.2011.03.007 (međunarodna recenzija, članak, znanstveni)

doi pdn.sciencedirect.com www.sciencedirect.com dx.doi.org

13.

Kormaníková, E.; Mamuzić, Ilija

Shear deformation laminate theory used for sandwiches // Metalurgija, 50 (2011), 3; 193-196 (međunarodna recenzija, prethodno priopćenje, znanstveni)

public.carnet.hr

14.

Gulyayev, YU. G.; Mamuzić, Ilija; Shyfrin, YE. I.; Buršak, M.; Garmashev, D. YU.

Perfection of processes of seamless steel tubes production // Metalurgija, 50 (2011), 4; 285-288 (međunarodna recenzija, pregledni rad, znanstveni)

public.carnet.hr

15.

Horsinka, J.; Kliber, J.; Drozd, K.; Mamuzić, Ilija

Approximation model of the stress-strain curve for deformation of aluminium alloys // Metalurgija, 50 (2011), 2; 81-84 (međunarodna recenzija, članak, znanstveni)

hrcak.srce.hr public.carnet.hr

16.

Kormaníková, E.; Mamuzić, Ilija

Optimization of laminates subjected to failure criterion // Metalurgija, 50 (2011), 1; 41-44 (recenziran, prethodno priopćenje, znanstveni)

hrcak.srce.hr pubweb.carnet.hr

17.

Dobatkin, S.; Zrnik, J.; Mamuzić, Ilija

Development of SPD continuous processes for strip and rod production // Metalurgija, 49 (2010), 4; 343-347 (međunarodna recenzija, pregledni rad, znanstveni)

hrcak.srce.hr

18.

Gulyayev, YU. G.; Shyfrin, YE. I.; Mamuzić, Ilija; Garmashev, D. YU.; Maximova, N. A.

The modern trends of development of the pipe and tube industry // Metalurgija, 49 (2010), 3; 187-190 (međunarodna recenzija, pregledni rad, znanstveni)

public.carnet.hr

19.

Kliber, J.; Mamuzić, Ilija

Selected new technologies and research themes in materials forming // Metalurgija, 49 (2010), 3; 169-174 (međunarodna recenzija, pregledni rad, znanstveni)

hrcak.srce.hr public.carnet.hr

20.

Chygyryns’kyy, Valeryy Victorovich; Shevchenko, Vladimir Grigorovich; Mamuzić, Ilija; Belikov, Sergey Borisevich

A new solution of the harmonic functions in theory of elasticity // Materiali in tehnologije, 44 (2010), 4; 219-222 (međunarodna recenzija, članak, znanstveni)

21.

Minakova, R. V.; Grechanyuk, I. N.; Bukhanovsky, V.V.; Rudnitsky, N. P.; Mamuzić, Ilija

Structure, electrical conductivity and mechanical characteristics of copper - tungsten composite obtained by electron beam physical vapour deposition (EB - PVD) technique // Transactions of FAMENA, 34 (2010), 2; 37-46 (međunarodna recenzija, članak, znanstveni)

22.

Chygyrynskyy, V. V.; Kachan, A. Ya.; Mamuzić, Ilija; Ben, A. N.

Generalized theory of plasticity // Materiali in tehnologije, 44 (2010), 3; 141-145 (međunarodna recenzija, članak, znanstveni)

www.imt.si

23.

Barišić, Branimir; Mamuzić, Ilija; Nastran, Miha

Improvement of sheet metal forming technology by aplicationof different software aproaches // Transactions of FAMENA, 34 (2010), 1; 29-38 (međunarodna recenzija, članak, znanstveni)

24.

Bukhanovsky, V. V.; Rudnitsky, N. P.; Charchenko, N. P.; Mamuzić, Ilija

Zvjazok miž tverdistju i harakreristikami micnosti mikrošaruvatovo kompozicijnovo materialu mid - hrom pri visokih temperatur // Problemy pročnosti (Kiev), 42 (2010), 2; 80-92 (međunarodna recenzija, članak, znanstveni)

25.

Matysiak, W.; Barišić, B.; Mamuzić, Ilija

Elaboration of the technology of forming a conical product of sheet metal // Metalurgija, 49 (2010), 1; 13-17 (međunarodna recenzija, članak, znanstveni)

hrcak.srce.hr

26.

Aračić, Stjepan; Krumes, Dragomir; Vitez, Ivan

Tribocorrosion of Low Carbon Steel C15E in 5 % NaCl and 5 % NaCl + SiO2 // Metalurgija, 49 (2010), 2; 111-114 (podatak o recenziji nije dostupan, prethodno priopćenje, znanstveni)

27.

Bukhanovskii, V.V.; Rudnitskii, N.P.; Mamuzić, Ilija; Minakova, R.V.; Grechanyuk, N.I.

Effect of composition and process factors on the structure, mechanical properties, and fracture behavior of a composite material of the copper – chromium system // Metal science and heat treatment, 51 (2009), 7/8; 388-393 doi:10.1007/s11041-009-9168-y (međunarodna recenzija, članak, znanstveni)

doi springerlink.metapress.com springerlink.metapress.com commerce.metapress.com

28.

Shramko, Aleksandr; Mamuzić, Ilija; Danchenko, Valentin

The application of the program Qform 2D in the stamping of wheels for railway vehicles // Materiali in tehnologije, 43 (2009), 4; 207-211 (međunarodna recenzija, članak, znanstveni)

29.

Gulyayev, Yu. G.; Shyfrin, Ye. I.; Mamuzić, Ilija

A mathematical model for the stationary process of rolling of tubes on a continuous mill // Materiali in tehnologije, 43 (2009), 2; 63-67 (međunarodna recenzija, članak, znanstveni)

mit.imt.si

30.

Bukhanovsky, V. V.; Rudnitsky, N. P.; Mamuzić, Ilija

Effect of temperature on mechanical characteristics of copper-chromium composite // Materials Science and Technology, 25 (2009), 8; 1057-1061 doi:10.1179/174328408X365829 (međunarodna recenzija, članak, znanstveni)

doi www.ingentaconnect.com

31.

Čurćija, Dušan; Mamuzić, Ilija

Proračun mazivoga sloja kod valjanja cijevi u kavezima // Goriva i maziva, 48 (2009), 1; 3-15 (podatak o recenziji nije dostupan, članak, znanstveni)

32.

Dobatkin, S.; Zrnik, J.; Mamuzić, Ilija

Mechanical and service properties of low carbon steels processed by severe plastic deformation // Metalurgija, 48 (2009), 3; 157-160 (međunarodna recenzija, članak, znanstveni)

hrcak.srce.hr

33.

Ćurčija, Dušan; Mamuzić, Ilija

Schemes of metal-working processes and the related tribological equations of fluid mechanics // Materiali in tehnologije, 43 (2009), 1; 23-30 (međunarodna recenzija, članak, znanstveni)

ctklj.ctk.uni-lj.si

34.

Gigović-Gekić, A.; Oruč, M.; Vitez, Ivan; Vujičić, B.

Analyse and research of nonmetallic inclusions for steel 100Cr6 // Metalurgija, 48 (2009), 1; 29-32 (podatak o recenziji nije dostupan, prethodno priopćenje, znanstveni)

35.

Bukhanovskii, V. V.; Mamuzić, Ilija

Effect of high-temperature gas medium on the structure and mechanical characteristics of niobium alloy 10VMTs // Metal Science and Heat Treatment, 50 (2008), 3-4; 123-128 doi:10.1007/s11041-008-9036-1 (međunarodna recenzija, članak, znanstveni)

doi springerlink.metapress.com

36.

Marušić, Vlatko; Vitez, Ivan; Nedić, Bogdan

Abrasive wear resistance of glass fiber reinforced polyester laminates // Metalurgija, 47 (2008), 4; 351-355 (podatak o recenziji nije dostupan, prethodno priopćenje, znanstveni)

public.carnet.hr

37.

Kvačkaj, T.; Molnárová, M.; Mamuzić, Ilija; Bacsó, J.; Mišičko, R.; Fujda, M.; Škodronová, P.; Kuskulič, T.; Pokorný, I.

Influence of reheating and cooling conditions on structure and mechanical properties of C-Mn-Si steel // Metalurgija, 47 (2008), 3; 187-190 (međunarodna recenzija, članak, znanstveni)

hrcak.srce.hr public.carnet.hr

38.

Bukhanovskii, V. V.; Mamuzić, Ilija

The influence of high-temperature gaseous medium on the structure and mechanical characteristic of niobium alloy 10VMTs // Problemy pročnosti (Kiev), 3 (2008), 26-32 (recenziran, članak, znanstveni)

39.

Ćurčija, Dušan; Mamuzić, Ilija

Lubrication flow during the rolling of seamless tubes // Materiali in tehnologije, 42 (2008), 2; 59-63 (međunarodna recenzija, članak, znanstveni)

40.

Zrnik, J.; Dobatkin, S. V.; Mamuzić, Ilija

Processing of metals by severe plastic deformation (SPD) – structure and mechanical properties respond // Metalurgija, 47 (2008), 3; 211-216 (međunarodna recenzija, pregledni rad, znanstveni)

public.carnet.hr

41.

Dobatkin, S.; Zrnik, J.; Mamuzić, Ilija

Ultrafine-grained low carbon steels by severe plastic deformation // Metalurgija, 47 (2008), 3; 181-186 (međunarodna recenzija, članak, znanstveni)

public.carnet.hr

42.

Vodopivec, F.; Arzenšek, B.; Vojvodič Tuma, J.; Celin, R.

The Charpy fracturing process in ductile range // Metalurgija, 47 (2008), 3; 173-179 (međunarodna recenzija, članak, znanstveni)

public.carnet.hr

43.

Mamuzić, Ilija

Pedesetpeta obljetnica utemeljenja Hrvatskog metalurškog društva (HMD) 1952. – 2007. // Metalurgija, 47 (2008), 3; 147-171 (međunarodna recenzija, pregledni rad, znanstveni)

hrcak.srce.hr public.carnet.hr

44.

Bukhanovsky, V. V.; Mamuzić, Ilija; Rudnitsky, N. P.

The effect of temperature on mechanical characteristic of copper - carbonic composite // Kovové materiály, 46 (2008), 1; 33-37 (međunarodna recenzija, članak, znanstveni)

www.kovmat.sav.sk

45.

Kormaníková, E.; Mamuzić, Ilija

Buckling analysis of a laminate plate // Metalurgija, 47 (2008), 2; 129-132 (međunarodna recenzija, članak, znanstveni)

public.carnet.hr

46.

Grechaniuk, N. I.; Mamuzić, Ilija; Minakova, R. V.

Peculiarities of the structure, its deformation and destruction of condensed Cu-Mo-Zr-Y composite material of commercial purity // Metalurgija, 47 (2008), 2; 99-102 (međunarodna recenzija, članak, znanstveni)

public.carnet.hr public.carnet.hr

47.

Rudnitsky, N. P.; Mamuzić, Ilija

Strength of anisotropic nickel-mesh composite materials // Metalurgija, 47 (2008), 1; 57-59 (podatak o recenziji nije dostupan, prethodno priopćenje, znanstveni)

Pristup cjelovitom tekstu rada public.carnet.hr

48.

Buršák, M.; Mamuzić, Ilija; Michel’ , J.

Contribution to evaluation of mechanical properties during impact loading // Metalurgija, 47 (2008), 1; 19-23 (međunarodna recenzija, članak, znanstveni)

public.carnet.hr

49.

Bukhanovskii, V. V.; Kharchenko, V. K.; Mamuzić, Ilija

Harakteristiki žaropročnosti nizkolegirovannogo molibdenovogo splava VM-1 // Problemy pročnosti (Kiev), 388 (2007), 4; 90-98 (recenziran, članak, znanstveni)

50.

Buršák, M.; Mamuzić, Ilija

Fatigue Properties of Galvanized Higher-Strength Steel Sheets // Metalurgija, 46 (2007), 4; 277-280 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada public.carnet.hr

51.

Mamuzić, Ilija; Trebuňa, F.; Buršák, M.; Tomčík, J.

Investigation of Reasons and Possibility of Parameters Elimination Influencing Cracking of Leaf Springs on Continuous Casting Machine // Metalurgija, 46 (2007), 4; 267-271 (podatak o recenziji nije dostupan, prethodno priopćenje, znanstveni)

Pristup cjelovitom tekstu rada public.carnet.hr

52.

Wencel, Z.; Budzik, R.; Križanić, Rade; Kolmasiak, C.

The Synergy of the Surface Layer after Carburizing of Tool Steel as a Measure of Operational Quality // Metalurgija, 46 (2007), 4; 255-260 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada public.carnet.hr

53.

Stepanov, G.; Mamuzić, Ilija; Babutsky, A.

An Increase of Impact Toughness of Low-Carbon Steel Caused by Impulse Electric Current Treatment // Metalurgija, 46 (2007), 4; 251-253 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada public.carnet.hr

54.

Buchanovsky, V. V.; Mamuzić, Ilija; Polishuk, E. P.

The Effect of Heat Treatment on Mechanical Characteristics and Nature of Failure of Sheet Molybdenum Alloys // Metalurgija, 46 (2007), 4; 233-236 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada public.carnet.hr

55.

Ćurčija, Dušan; Mamuzić, Ilija

Lubricating film formation for strip dressing // Goriva i maziva, 46 (2007), 1; 34-44 (recenziran, članak, znanstveni)

56.

Ćurčija, Dušan; Mamuzić, Ilija

Theoretical calculation of the lubrication-layer thickness during metal drawing // Materiali in tehnologije, 41 (2007), 1; 21-27 (međunarodna recenzija, pregledni rad, znanstveni)

57.

Buršak, Marian; Mamuzić, Ilija; Michel', J.

New Approach to Evaluation of Formability of Higher-Strength Steel Strips // Metalurgija, 46 (2007), 1; 37-40 (recenziran, prethodno priopćenje, znanstveni)

pubwww.srce.hr

58.

Zrnik, J.; Mamuzić, Ilija; Dobatkin, S. V.; Stejskal, Z.; Kraus, L.

Low Carbon Steel Processed by Equal Channel Angular Warm Pressing // Metalurgija = Metallurgy, 46 (2007), 1; 21-27 (međunarodna recenzija, članak, znanstveni)

pubwww.srce.hr

59.

Grechanyuk, N. I.; Mamuzić, Ilija; Bukhanovsky, V. V.

Production Technology, Physical, Mechanical and Performance Characteristics of Cu-Zr-Y-Mo Finely-Dispersed Microlayer Composite Materials // Metalurgija = Metallurgy, 46 (2007), 2; 93-96 (međunarodna recenzija, članak, znanstveni)

pubwww.srce.hr

60.

Krivenyuk, V.; Mamuzić, Ilija

Correlation of Creep-Rupture Data for Complex Alloys at Elevated Temperatures // Metalurgija, 46 (2007), 2; 79-85 (međunarodna recenzija, članak, znanstveni)

public.carnet.hr

61.

Devčić, Nikola; Mamuzić, Ilija

Putokazi modernizacije pilger postrojenja // Metalurgija, 46 (2007), 3; 205-209 (međunarodna recenzija, pregledni rad, znanstveni)

Pristup cjelovitom tekstu rada hrcak.srce.hr

62.

Wangyao, P.; Zrnik, J.; Mamuzić, Ilija; Polsilapa, S.; Klaijumrang, S.

Restoration and Thermal Stability Investigation of Intermetllic Phase in Exposed Nickel Base Superalloy Udimet 500 Turbine Blades // Metalurgija, 46 (2007), 3; 195-199 (međunarodna recenzija, prethodno priopćenje, znanstveni)

Pristup cjelovitom tekstu rada public.carnet.hr

63.

Vitez, Ivan; Oruč, M.; Krumes, Dragomir; Kladarić, Ivica

Damage to railway rails caused by exploitation // Metalurgija, 46 (2007), 2; 123-128 (međunarodna recenzija, pregledni rad, znanstveni)

1.

Globa, Larisa; Novogrudska, Rina; Mamuzić, Ilija

Development of a model for the internet portal "Strength of materials" // Materiali in tehnologije, 46 (2012), 4; 407-410 (recenziran, članak, stručni)

mit.imt.si

2.

Mamuzić, Ilija

Success raises expectation: Print of Monography also with »Bibliography of Journal Metalurgija 1962 - 2012« // Metalurgija, 51 (2012), 1; 5-8 (domaća recenzija, članak, stručni)

hrcak.srce.hr public.carnet.hr

3.

Mamuzić, Ilija

50-a godina tiskanja časopisa Metalurgija // Metalurgija, 50 (2011), 1; 3-7 (domaća recenzija, članak, stručni)

hrcak.srce.hr public.carnet.hr

4.

Kharlamov, Yuriy; Dal, Vladimir; Mamuzić, Ilija; Lopata, Larysa; Pisarenko, G. S.

The selection and development of tribological coatings // Materiali in tehnologije, 44 (2010), 5; 283-287 (recenziran, članak, stručni)

mit.imt.si www.imt.si

5.

Babutsky, A. P.; Chrysanthou, A.; Ioannou, J.; Mamuzić, Ilija

Correlation between corrosion resistance and hardness scattering of structural metals treated by pulse electric current // Materiali in tehnologije, 44 (2010), 2; 99-102 (recenziran, članak, stručni)

www.imt.si

6.

Mamuzić, Ilija

Hrvatsko metalurško društvo (HMD) - 55. obljetnica utemeljenja (2. dio) // Zavarivanje, 52 (2009), 3/4; 127-130 (recenziran, članak, stručni)

7.

Mamuzić, Ilija

Hrvatsko metalurško društvo (HMD) - 55. obljetnica utemeljenja (1. dio) // Zavarivanje, 52 (2009), 1/2; 35-38 (recenziran, članak, stručni)

1.

Mamuzić, Ilija

Acknowledgement to Reviewers for 2011 // Metalurgija, 50 (2011), 4; 244-244 (podatak o recenziji nije dostupan, ostalo)

public.carnet.hr

2.

Mamuzić, Ilija

10^th International Symposium of Croatian Metallurgical Society "Materials and Metallurgy" SHMD '2012 : First Circular - Call for Papers // Metalurgija, 50 (2011), 2; 75-80 (podatak o recenziji nije dostupan, ostalo)

public.carnet.hr

3.

Mamuzić, Ilija

Acknowledgement to Reviewers for 2010 // Metalurgija, 50 (2011), 1; 8-8 (podatak o recenziji nije dostupan, zahvala, ostalo)

public.carnet.hr

4.

Mamuzić, Ilija

150th anniversary of VDEh, Stahl Institute // Stahl und Eisen, 130 (2010), 11; 74-74 (međunarodna recenzija, uvodnik, stručni)

5.

Mamuzić, Ilija

Acknowledgements to Reviewers for 2009 // Metalurgija, 48 (2009), 4; 228-228 (podatak o recenziji nije dostupan, ostalo)

public.carnet.hr

6.

Mamuzić, Ilija

Acknowledgements to Reviewers for 2008 // Metalurgija, 48 (2009), 1; 14-14 (zahvala, ostalo)

public.carnet.hr

7.

Mamuzić, Ilija

First Circular - Call for Papers, 9^th International Symposium of Croatian Metallurgical Society SHMD’ 2010 // Metalurgija, 48 (2009), 1; 3-8 (podatak o recenziji nije dostupan, ostalo)

public.carnet.hr

8.

Zrnik, J.; Vitez, Ivan; Kovarik, T., Cieslar, M.

Forming of ultrafine grained structure in aluminium by CGP method // Metalurgija, 48 (2009), 1; 15-18 (recenziran, izvorni znanstveni rad, znanstveni)

1.

Kliber, Jiri; Kunčicka, Lenka; Mamuzić, Ilija

Review of peak stress setting // METAL 2013 : Summaries of Lectures / Kliber, Jiri (ur.).
Brno, 2013. str. 37-44 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

2.

Lackova, Petra; Hagarova, Maria; Mamuzić, Ilija

Tests of paintings applied on the KONOX 315 S steel // Proceedings "Corrosion in power industry 2012" / J. Kocich (ur.).
Košice: Technical University of Košice, Faculty of Metallurgy, 2012. str. 81-84 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

3.

Mamuzić, Ilija

9000 godina metalurgije // Zbornik radova, Okrugli sto - Značaj i uloga Metalurškog instituta "Kemal Kapetanović" Zenica u razvoju obrazovnog i privrednog sistema BiH : povodom 50 godina postojanja i rada Metalurškog instituta / Mirsada Oruč, Milenko Rimac, Neira Delić, Faik Čičak (ur.).
Zenica: Univerzitet u Zenici, Metalurški institut, 2012. str. 15-24 (pozvano predavanje, domaća recenzija, cjeloviti rad (in extenso), znanstveni)

4.

Drozd, Kamil; Horsinka, Jaromir; Kliber, Jori, Černi, Martin; Ostroushko, Dmytro; Mamuzić, Ilija

Study of development of strain in plane strain compression test // Metal 2011 / Kliber, Jiri (ur.).
Hradec nad Moravici: Tanger, 2011. str. 55-62 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

5.

Ćurčija, Dušan; Mamuzić, Ilija , Brušak, M.

The lubricating layer modelling and simulating at band dressing // MATRIB 2010 / Grilec, Krešimir ; Marić, Gojko (ur.).
Vela Luka: Hrvatsko društvo za materijale i tribologiju (HDMT), 2010. str. 1-12 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

6.

Kliber, Jiri; Mamuzić, Ilija

Torsion plastomer results used for determination of degree of softening in steel // Proceedings of International Conference on Progresivnyje technologii plasticeskoj deformaciji
Moskva: MISIS Moskva, OOOTrumpf, 2009. str. 445-451 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

7.

Madunić, Božo; Vitez, Ivan

Postupci ispitivanja vrelovoda // Zbornik radova 7. skup o prirodnom plinu, toplini i vodi / Klarić, Štefanija ; Kozak, Dražan ; Samardžić, Ivan ; Stoić, Antun ; Stojšić, Josip (ur.).
Osijek: HEP Plin Osijek, Strojarski fakultet u Slavonskom brodu, HEP Toplinarstvo Osijek, Vodovod Osijek, 2009. str. - (predavanje, domaća recenzija, cjeloviti rad (in extenso), znanstveni)

8.

Ćurčija, Dušan

Modeliranje mazivoga sloja kod dresiranja trake s utjecajem hrapavosti površina // Stručna izdanja Hrvatskog društva za goriva i maziva = Croatian society for fuels and lubricants Symposium proceedings / Legiša, Ivo (ur.).
Rovinj, 2009. str. C9-C9 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

9.

Vitez, Ivan; Krumes, Dragomir; Pecić, Vladimir

RAZREDBA VRSTA ČELIKA PREMA HRN EN 10020 // Quality 2009, Proceedings / Brdarević, Safet (ur.).
Neum: Univerzitet u Zenici, Fakultet za metalurgiju i materijale, 2009. str. 935-940 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

10.

Vitez, Ivan; Pecić, Vladimir; Vujčić, Branimir

PREGLED OŠTEĆENJA ŽELJEZNIČKIH TRAČNICA OD GREŠAKA ZAVARIVANJA I NAVARIVANJA // Zbornik radova, ROBOTIZACIJA I AUTOMATIZACIJA U ZAVARIVANJU I OSTALIM TEHNIKAMA / Samardžić, Ivan (ur.).
Slavonski Brod: Strojarski fakultet Sveučilišta u Slavonskom Brodu, 2009. str. 333-341 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

11.

Ćurčija, D.; Mamuzić, Ilija; Buršak, M.

Modeliranje mazivoga sloja kod dresiranja trake // MATRIB 2009 / Grilec, Krešimir ; Marić, Gojko (ur.).
Zagreb: Hrvatsko društvo za materijale i tribologiju (HDMT), 2009. str. 1-12 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

12.

Barišić, Branimir; Mamuzić, Ilija; Čep, Robert

Production Supported by Combination of Different Software in Sheet Metal Forming // Management of Technology – Step to Sustainable Production / Čosić, Predrag (ur.).
Zagreb, 2009. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

13.

Kliber, Jiri; Drozd, Kamil; Mamuzić, Ilija

Plastometricke vysledky napetovo-deformačnih chovani a stupne zmekčeni feromanganove twip oceli // METAL 2009 / Kliber, Jiri (ur.).
Hradec nad Moravici: TANGER, 2009. str. 19-21 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

14.

Štaba, Jan; Mamuzić, Ilija; Bernathova, Izabela

Vplyv deformacie na degradaciu pozinkovanej vrstvy // Korozia uložnych zariadeni 2009 : Zbornik / Halama, Maroš ; Ševičkova, Jarmila (ur.).
Košice: Technical Universyti of Košice, 2009. str. 124-132 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

15.

Voločko, A. T.; Mamuzić, Ilija

Kompozicionnye aljuminievye materialy armirovannye dispersnymi časticami, perospektivy iz sozdanija // Sovremennye metody i tehnologii sozdanija i obrabotki materijalov : kniga 1 : mnogofunkcionaljnye materialy v sovremennoj tehnike, mikro- i nanoelektronike / P. A. Vitjaz ; N. V. Spiridonov (ur.).
Minsk: Fti Nan, 2008. str. 81-86 (plenarno, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

16.

Ćurčija, Dušan

Modeliranje mazivog sloja kod valjanja bešavnih cijevi // MATRIB 2008 Abstracts book / Grilec, Krešimir ; Marić, Gojko ; Jakovljević, Suzana (ur.).
Zagreb: Hrvatsko društvo za materijale i tribologiju (HDMT), 2008. str. 35-50 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

17.

Aksenova, Sergey; Kliberb, Jiří; Fabíkc, Richard; Mamuzić, Ilija

An Experimental And Computer Study Of The Influence Of Deformation Conditions On Microalloyed Strip Steel Microstructure Evolution // 17th International Metallurgical & Materials Conference Proceedings : METAL 2008 / Kliber, Jiri (ur.).
Hradec nad Moravicí, Češka Republika, 2008. 19, 7 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

metal2014.tanger.cz

18.

Krumes, Dragomir; Kladarić, Ivica; Vitez, Ivan

Mechanical properties of boronizing steels as repercussion of boron phases // Materials and technology, 2nd International Conference on Heat Treatment and Surface Engineering of Tools and Dies / Leskovšek, Vojteh ; Smoljan, Božo ; Jager, Heimo ; Jenko, Monika (ur.).
Bled: Institute of Metals and Technology, 2008. str. 112-113 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

19.

Vitez, Ivan; Krumes, Dragomir; Pecić, Vladimir; Oruč, Mirsada; Madunić, Božo

Vrste i oznake konstrukcijskih čelika prema novoj europskoj normi // VII Naučno/stručni simpozij sa međunarodnim učešćem, Metalni i nemetalni materijali - proizvodnja - osobine - primjena / Begovac, Fuad (ur.).
Zenica: Univerzitet u Zenici, Fakultet za metalurgiju i materijale, 2008. str. 161-161 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

20.

Buršak, Marian; Mamuzić, Ilija; Bernatova, Izabela

Analyza pričiny porušenia potrubia pomocneho vstreku // Material v inžinierskej praxi 2008 / Maria Mihalikova, Jan Štaba (ur.).
Košice: tehnical University of Košice, Faculty of Metallurgy, 2008. str. 155-158 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

21.

Vitez, Ivan; Oruč, Mirsada; Begovac, Fuad

Prilog označivanju željeznih ljevova po europskim standardima // 6th International Scientific Conference RIM 2007, Development and modernization of production / Karabegović, Isak ; Jurković, Milan ; Doleček, Vlatko (ur.).
Plitvička jezera: Tehnički fakultet Univerziteta u Bihaću, 2007. str. A75, 1-6 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

22.

Budić, Ivan; Novoselović, Daniel; Vitez, Ivan

The influence of mold humidity and pouring temperature on occurrence of residual stresses in iron castings // Annals of DAAAM for 2007 & Proceedings of the 18th International DAAAM symposium "Intelligent Manufacturing & Automation : Focus on Creativity, Responsibility and Ethics of Engineers" / Katalinić ; Branko (ur.).
Beč: Annual by DAAAM International Vienna, 2007. str. 117-118 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

23.

Begovac, Fuad; Oruč, Mirsada; Vitez, Ivan

The influence of forging temperature, deformation degree and heat treatment on the mechanical properties of ship axles // 11th International Research/Expert Conference TRENDS IN THE DEVELOPMENT OF MACHINERY AND ASSOCIATED TECHNOLOGY, TMT 2007, Proceedings / Ekinović, Sabahudin ; Yalcin, Senay ; Vivancos Calvet, Joan (ur.).
Hammamet: Faculty of Mechanical Engineering in Zenica, Fakultetska 1, Zenica, BiH ; Escola Tecnica Superior D'Enginyeria Industrial de Barcelona, Department d' Enginyeria Mechanica, Universitat Politecnica de Catalunya, Spain, Bahcesehit University Istanbul, Muhendislik Fakultesi, Turkey, 2007. str. 99-102 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

24.

Vitez, Ivan; Budić, Ivan, Marušić, Vlatko

Treatment regarding the maintenance of railway rails // 11th International Research/Expert Conference Trends in the development of machinery and associated technology (TMT 2007) : proceedings / Ekinović, Sabahudin ; Yalcin, Senay ; Vivancos Calvet, Joan (ur.).
Zenica : Barcelona : Istanbul: Faculty of Mechanical Engineering ; Escola Tecnica Superior D'Enginyeria Industrial ; Muhendislik Fakultesi, 2007. str. 1515-1518 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

25.

Krumes, Dragomir; Vitez, Ivan; Aračić, Stjepan

Investigation of corrosion resistance of steels with and without boride layers // CONFERENCE PROCEEDINGS ICIT&MPT 2007, 6th International Conference on Industrial Tools and Material Processing Technologies / Kuzman, Karl (ur.).
Bled: TECOS Slovenian Tool and Die Development Centre, Celje, 2007. str. 219-222 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

26.

Gajdzica, Tomáš; Aksenov, Sergey; Kliber, Jiří; Svider, Radim; Mamuzić, Ilija

Vliv ohřevu z hlediska přípravy materiálu k válcování vytypovaných značek Cr-Mo ocelí // METAL 2007 / Kliber, Jiri (ur.).
Hradec nad Moravici: TANGER, 2007. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

27.

Gajdzica, Tomáš; Kliber, Jiří; Žáček, Ondřej; Mamuzić, Ilija

Válcování za studena trip oceli po termomechanickém zpracování // METAL 2007 / Kliber, Jiri (ur.).
Hradec nad Moravici: TANGER, 2007. 148, 11 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

metal2014.tanger.cz

28.

Vitez, Ivan; Krumes, Dragomir; Pecić, Vladimir; Penava, Andrijana

Principi dijagnosticiranja i eliminacije oštećenja tračnica // 5th Research/Expert Conference with International Participation, Quality 2007, Proceedings / Brdarević, Safet (ur.).
Neum: Faculty of Mechanical Engineering in Zenica, Fakultetska 1, Zenica, BiH, 2007. str. 221-226 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

29.

Damjanović, Darko; Vitez, Ivan

Označivanje čelika po europskim normama // Zbornik radova "TECHNO-EDUCA 2007" - Savremene tehnologije za mali i veliki biznis, Proceedings Studentska naučno-stručna konferencija u okviru sajma ZEPS Intermetal / Petković, Darko (ur.).
Zenica: Univerzitet u Zenici, Mašinski fakultet, 2007. str. 48-60 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1.

Vitez, Ivan; Krumes, Dragomir; Kosec, Borut; Dolovčak, Dražen

Označivanje željeznih ljevova po europskim standardima // MATRIB 2008, Vela Luka, Korčula / Grilec, Krešimir ; Marić, Gojko ; Jakovljević, Suzana (ur.).
Vela Luka: Hrvatsko društvo za materijale i tribologiju, Zagreb, 2008. str. 397-402 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), ostalo)

1.

Muzyka, N.R.; Shvets, V.P.; Mamuzić, Ilija

Determination of Stresses and Strains in an Elasto-plastically Deformed Product from the Hardness Characteristics // Summaries of lectures of the 11th international symposium of Croatian Metallurgical Society SHMD '2014 : Materials and Metallurgy, published in Metalurgija 53 (2014) 3 / Mamuzić, Ilija (ur.). -
Zagreb: Hrvatsko metalurško društvo, 2014. str. x-x (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

2.

Shvets, V.P.; Bulakh, P.A.; Maslo, A.N.; Mamuzić, Ilija

Damageafaility of Steel 25Kh1M1FA under Long-term Loading at Elevated Temperatures // Summaries of lectures of the 11th international symposium of Croatian Metallurgical Society SHMD '2014 : Materials and Metallurgy, published in Metalurgija 53 (2014) 3 / Mamuzić, Ilija (ur.). -
Zagreb: Hrvatsko metalurško društvo, 2014. str. x-x (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

3.

Grechanyuk, N.I.; Minakova, R.V.; Bukhanovskii*, V.V.; Rudnitsky, N.P.; Mamuzić, Ilija

Microlayered Condensed Materials on Basis of Copper, Refractory, Rare-earth Metals, and Carbon for Electrodes and Electrical Contacts // Summaries of lectures of the 11th international symposium of Croatian Metallurgical Society SHMD '2014 : Materials and Metallurgy, published in Metalurgija 53 (2014) 3 / Mamuzić, Ilija (ur.). -
Zagreb: Hrvatsko metalurško društvo, 2014. str. x-x (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

4.

Kravchyk, R.V.; Mamuzić, Ilija

Deformation Behavior of Thin Aluminum Plate under Equibiaxial Tension // Summaries of lectures of the 11th international symposium of Croatian Metallurgical Society SHMD '2014 : Materials and Metallurgy, published in Metalurgija 53 (2014) 3 / Mamuzić, Ilija (ur.). -
Zagreb, 2014. str. x-x (poster, sažetak, znanstveni)

5.

Netrebskii, M.A.; Rabkina, M.D.; Mutas; V.V.; Mamuzić, Ilija

Service Defects and Assessment of their Influence on Strength of Pressure Vessels and Pipelines in Petroleum Processing Production Systems // Summaries of lectures of the 11th international symposium of Croatian Metallurgical Society SHMD '2014 : Materials and Metallurgy, published in Metalurgija 53 (2014) 3 / Mamuzić, Ilija (ur.). -
Zagreb: Hrvatsko metalurško društvo, 2014. str. x-x (poster, međunarodna recenzija, sažetak, ostalo)

6.

Ban’ko, S.M.; Kharchenko, V.V.; Kobelsky, S.V.; Kravchenko, V.I.; Chirkov, A.Yu.; Mamuzić, Ilija

Stress State of the Header-to-PGV-1000M Steam Generator Connector Weldment with a Cavity // Summaries of lectures of the 11th international symposium of Croatian Metallurgical Society SHMD '2014 : Materials and Metallurgy, published in Metalurgija 53 (2014) 3 / Mamuzić, Ilija (ur.). -
Zagreb: Hrvatsko metalurško društvo, 2014. str. x-x (poster, sažetak, znanstveni)

public.carnet.hr

7.

Kharchenko, V.V.; Kondryakov, E.A.; Panasenko, A.V.; Mamuzić, ilija

Investigation of the Crack Propagation in the Charpy Specimens Under Impact Loading on Vertical Instrumented Drop-weight Impact Testing Machine // Summaries of lectures of the 11th international symposium of Croatian Metallurgical Society SHMD '2014 : Materials and Metallurgy, published in Metalurgija 53 (2014) 3 / Mamuzić, Ilija (ur.). -
Zagreb: Hrvatsko metalurško društvo, 2014. str. x-x (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

8.

Makaev, A.G.; Kharchenko, V.V.; Bukhanovskii, V.V.; Mamuzić, Ilija

Finite Element Simulation of the Small Punch Test // Summaries of lectures of the 11th international symposium of Croatian Metallurgical Society SHMD '2014 : Materials and Metallurgy, published in Metalurgija 53 (2014) 3 / Mamuzić, Ilija (ur.). -
Zagreb: Hrvatsko metalurško društvo, 2014. str. x-x (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

9.

Rudenko, N. P.; Ćurćija, D.

Mathematical model of acid etching // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 430-430 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

10.

Momot, J. G.; Devčić, N.

Cost management industry in crisis // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 430-430 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

11.

Sivoplyas, U. V.; Karmazina, L. L.; Križanić, Rade

Knowledge management in project management area at industrial enterprises // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 429-429 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

12.

Sivoplyas, U. V.; Jurković, M.

Internal innovations as intangible project assets of industrial enterprises // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 429-429 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

13.

Dolzhanskiy, A. M.; Mos’pan, N. N.; Ćurćija, D.

Quality evaluation of modeling of virtual experiment // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 429-429 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

14.

Doldzhanskiy, A. M.; Bondarenko, O. A.; Mamuzić, Ilija

Method of quality complex index maximizing for product and process // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 429-429 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

15.

Zhurba, A. A.; Mikhalyov, A. I.; Vitez, Ivan

Fractal analysis of surfaces of penrose // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 429-429 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

16.

Sharabura, Т. А.; Pinchuk, V. A.; Devčić, N.

Ecological aspects of the thermal processing of water-coal fuel // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 429-429 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

17.

Kormanikova, E.; Mamuzić, Ilija

Shear deformation laminate theory used for sandwiches // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 425-425 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

18.

Kormanikova, E.; Mamuzić, Ilija

Optimization of laminates subjected to failure criterion // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 425-425 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

19.

Shlomchak, G.; Mamuzić, Ilija; Sosnev, I.

Materials for modeling of the plastic forming processes of rheologically complex metals with low plasticity // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 423-423 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

20.

Markevich. I. V.; Grigorenko, V. U.; Drojja, P. V.; Križanić, R.

Determination of the radius riding in the uneven distribution of normal contact stresses along the perimeter of the fire // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 420-420 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

21.

Hamidov, F. G.; Mamedov, Z. G.; Rakhmanov, S. R.; Mamuzić, Ilija

Combined deformation and heat treatment of steel with a bainitic structure // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 420-420 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

22.

Pinchuk, S. I.; Balakin, V. F.; Tishkevich. D. G.; Mamuzić, Ilija

The increasing of the corrosion resistance of the tubing // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 419-419 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

23.

Balakin, V. F.; Nikolaenko, J. N.; Solov`eva, I. A.; Sergeeva, O. V.; Jurković, M.

Computer designing оf process production cold-deformed tubes // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 419-419 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

24.

Popov, M. V.; Balakin, V. F.; Perchanik, V. V.; Bilan, K. S.; Mamuzić, Ilija

New scheme of pilger rolling of tubes – a perspective way to obtain the required structure-sensitive properties // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 419-419 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

25.

Rakhmanov, S. R.; Topolov, V. L; Jurković, M.

The dynamics of unsteady processes in helical rolling mill drives // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 419-419 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

26.

Karasik, T. L.; Jurković, M.

Research of sheetings for processing of metals by pressure at heats // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 419-419 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

27.

Zhuravel, V. P.; Karasik, A. O.; Mamuzić, Ilija

Technological processing at hot pressing of pipes // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 419-419 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

28.

Myronova, T. M.; Ruden, D. A.; Mamuzić, Ilija

The influence of matrix structure on the deformed cast irons properties // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 418-418 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

29.

Balakan, M. A.; Mamuzić, Ilija

Effect of plastic deformation on microstructure and poperties of Al-Cu alloy // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 418-418 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

30.

Kuznetsov, D. A.; Mamuzić, Ilija

Effect of fine grained ferrite in surface layers on fatigue behavior of low carbon steel plates // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 418-418 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

31.

Korshunov, Yu. A.; Mamuzić, Ilija

Strain hardening and steady state deformation of Al–Mg alloys // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 418-418 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

32.

Grechishkina, A. M.; Piskun, G. I.; Živković, V.

Transformation of textures in hot rolled microalloyed steel // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 418-418 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

33.

Berezyanko, G. V.; Chukhno, V. Yu.; Mamuzić, Ilija

Behaviour of metal flow in the spreading extrusion process // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 418-418 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

34.

Furmanchuk, V. P.; Šipalo Žuljević, J.

Deformation of aluminium alloy AL20 in semisolid state // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 418-418 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

35.

Tymchenko, V. A.; Sigalov, B. R.; Devčić, N.

Temperature changes occurring during extrusion of metals // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 418-418 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

36.

Borisoglebsky, L. T. : Gordeev, A. S.; Devčić, N.

Fabrication of alumina dispersion strengthened copper strips by internal oxidation and hot rolling // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 418-418 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

37.

Chyorny, A. A.; Demchenko, V. P.; Devčić, N.

Hot plane strain compression testing of aluminium specimens // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 417-417 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

38.

Kuleshov, A. K.; Kucherenko, R. T.; Ćurćija, Dušan

Influence of titanium on hot ductility of C–Mn–Al steels // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 417-417 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

39.

Safargalov, K. M.; Polonsky, M. S.; Jurković, M.

Evolution of microstructure and plastic stability during superplastic flow in a 1201 aluminium alloy // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 417-417 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

40.

Zhmachenko, T. A.; Kristopchuk, F. O.; Mamuzić, Ilija

Computational modelling of effects of roll gap geometry in hot rolling // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 417-417 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

41.

Solov`eva, I. A.; Tereschenko, V. S.; Golubitsky, A. S.; Sergeeva, O. V.; Tkalčić, D.

Prediction planned targets extended periods of melting // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 411-411 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

42.

Rudenko, N. P.; Šipalo Žuljević, J.

Kinetics of cathode processes on iron and steels in acid etchant // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 411-411 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

43.

Gasik, M. I.; Zubov, V. L.; Šipalo Žuljević, J.

Problem questions of physics and chemistry of the concentration of radionuclides in the slag charging materials smelting ferrosilicon // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 410-410 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

44.

Kamkina, L. V.; Stovba, Y. V.; Križanić, R.

Physico-chemical analysis of nonequilibrium phase interactions in obtaining high-carbon ferromanganese // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 410-410 (poster, sažetak, znanstveni)

public.carnet.hr

45.

Naumov, O. S.; Fomenko, G. V.; Ćurćija, D.

Working out of structures of astringents compositions with use of a waste of a metallurgical complex // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 410-410 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

46.

Rybalchenko, M. A.; Golovko, V. I.; Devčić, N.

Management features by the processes of mixing of materials on a conveyer // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 410-410 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

47.

Repyakh, S. I.; Mamuzić, Ilija

Wax model for casting // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 410-410 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

48.

Usenko, R. V.; Tkalčić, D.

Viscosity phosphate slurry to produce ceramic shell molds // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 410-410 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

49.

Zhegur, A. A.; Repyakh, S. I.; Šipalo Žuljević, J.

On reducing the cost of preparation of ceramic shell molds for casting // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 409-409 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

50.

Kalinin, V. T.; Syslo, N. V.; Vitez, Ivan

Studies on the use in the manufacture of iron nano-modifier grinding balls // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 409-409 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

51.

Kiriya, R. V.; Braginec, D. D.; Tkalčić, D.

Adaptive control by an usrednyayushim bunker working in the conditions of coal mines // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 409-409 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

52.

Gubenko, Sv.; Križanić, R.

Melting and crystallization of non-metallic inclusions under laser treatment of steels // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 409-409 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

53.

Karpov, V. V.; Karpov, V. U.; Vitez, Ivan

Reception of cast porous alloys – gazers // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 409-409 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

54.

Pankov, R. V.; Mamuzić, Ilija

Structural transformation during the heat treatment of chromium coatings // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 400-400 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

55.

Polyakova, N.; Boyko, M.; Mamuzić, Ilija

The influence structural peculiarities of high-chromium cast iron on it’s quality as wear-resistance material // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 400-400 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

56.

Kavats, A. A.; Devčić, N.

Modelling of microstructure formation of metallic alloys with external vibro influence // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 400-400 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

57.

Synytsina, Yu. P.; Ćurćija, D.

The metallographic analysis of iron sulfide thin films which have been obtained using high-speed evaporation method // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 400-400 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

58.

Rudenko, N. P.; Shevchenko, G. I.; Vitez, I.

Оn structural transformations of silicon carbide in aluminosilicate media under heating // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 400-400 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

59.

Myronova, T. M.; Devčić, N.

The use of carbide transformations for white cast irons ductility improvement // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 400-400 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

60.

Seliverstov, V. U.; Loevskaya, A. A.; Jurković, M.

Prospects for the use of recycled iron-man-made origin of cold-forming mixtures // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 399-399 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

61.

Movchan, A.; Mamuzić, Ilija

Formation of three-phase composite materials of ferritic iron alloys by carburization // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 399-399 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

62.

Levko, O.; Kylyvnyk, K.; Ćurćija, D.

The electrochemical properties of LiMn₂O₄ electrodes deposited by the hpvds method of condensation – solidification // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 399-399 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

63.

Galushko, I. M.; Danilenko, V. A.; Mamuzić, Ilija

Criterion for peritectic reaction // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 399-399 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

64.

Galushko, I. M.; Dvornikova, K. A.; Jurković, M.

Calculation of the number of phase constituents in peritectic systems with separate crystallization of phases // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 399-399 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

65.

Mazorchuk, V. F.; Mamuzić, Ilija

Research of the microstructure of cast metal obtained by using floating top insert // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 399-399 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

66.

Kalinina, N. Ju.; Šipalo Žuljević, J.

Methods of identification of the structural components of alloys on their color images // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 399-399 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

67.

Gul, Iurii; Chmeleva, V.; Mamuzić, Ilija

Efficiency of use of stationary and non-stationary coolers at heat treatment of metal products: theory and directions of practical use // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 398-398 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

68.

Ivchenko, Z. A.; Lunev, V.V.; Križanić, R.

Factors of the mechanical properties of cast titanium alloy VT5L (VT5L-MS) // Summaries of lectures of the 10^th international symposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 398-398 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

69.

Malinovsky, L. F.; Križanić, R.

Stress induced martensite transformation texture in austenitic stainless steel // Summaries of lectures of the 10^th international simposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 398-398 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

70.

Chumachenko, L. K.; Mamuzić, Ilija

Study on effect of residual stress distributions on kinetics of static strain aging after cold rolling // Summaries of lectures of the 10^th international simposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 398-398 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

71.

Blumkin, G. M.; Jakšić, D.

Influence of homogenisation treatment on microstructure and hot ductility of aluminium alloy AL 27. // Summaries of lectures of the 10^th international simposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 398-398 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

72.

Baumshtein, D. V.; Mamuzić, Ilija

Mechanical behaviour of stainless steel under warm working conditions // Summaries of lectures of the 10^th international simposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 398-398 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

73.

Korshunov, P. I.; Shishkov, G. L.; Jakšić, D.

Effect of heat treatment on fatigue of aluminium alloy // Summaries of lectures of the 10^th international simposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 397-397 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

74.

Shorshorov, E. I.; Mamuzić, Ilija

Effect of sulphur on impact properties of bainitic or martensitic steels // Summaries of lectures of the 10^th international simposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 397-397 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

75.

Marchuk, P. I.; Mirovich, O. P.; Jakšić, D.

Effect of thermomechanical treatment on flow behaviour, microstructure and texture development of aluminium alloy in semisolid state // Summaries of lectures of the 10^th international simposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 397-397 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

76.

Mitrofanov, H. L.; Jakšić, D.

Failure of ultra high strength low alloy steel // Summaries of lectures of the 10^th international simposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 396-396 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

77.

Gotsman, D. M.; Mamuzić, Ilija

Effect of austenite grain size on isothermal bainite transformation in low carbon microalloyed steel // Summaries of lectures of the 10^th international simposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 396-396 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

78.

Datsenko, Yu. I.; Jakšić, D.

Processing, microstructure, and properties of Mg–SiC composites // Summaries of lectures of the 10^th international simposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 395-395 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

79.

Gudyma, M. I.; Jakšić, D.

Behaviour of binary Al–2Li alloy at high temperature, high strain forging // Summaries of lectures of the 10^th international simposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 395-395 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

80.

Derkach, A. S.; Mishakov, A. L; Jakšić, D.

Computer modelling of dendritic grain structures // Summaries of lectures of the 10^th international simposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 395-395 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

81.

Krivsha, M. A.; Machulenko, L. I.; Mamuzić, Ilija

Microstructure and mechanical properties of a Ti–14Mo based beta titanium alloy // Summaries of lectures of the 10^th international simposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 395-395 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

82.

Safargallin, L. M.; Mamuzić, Ilija

Microstructure and tensile properties of 8Cr–1, 5Mo steel // Summaries of lectures of the 10^th international simposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 395-395 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

83.

Rabinovitch, A. M.; Chushko, P. I.; Živković, V.

Rejuvenation process for nickel base superalloys // Summaries of lectures of the 10^th international simposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 395-395 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

84.

Mayevsky, G. V.; Živković, V.

Microstructure and mechanical properties of C–Si–Mn steels after simulated thermomechanical processing // Summaries of lectures of the 10^th international simposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 394-394 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

85.

Goshovsky, V. O.; Potyomkin, S. M.; Šipalo Žuljević, J.

Influence of nitriding on fatigue strength of chromium-molybdenum steels // Summaries of lectures of the 10^th international simposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 394-394 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

86.

Marchenko, L. I.; Ćurćija, D.

Effect of alumina particle size and thermal condition of casting on microstructure and mechanical properties of stir cast Al-Al₂O₃ composites // Summaries of lectures of the 10^th international simposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society, 2012. str. 394-394 (poster, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

Pregled po projektu: Oblikovanje deformiranjem i svojstva novih metalnih materijala (MB: MZOS-120-1201787-1491)

Knjige i poglavlja u knjigama

Autorske knjige

Poglavlja u knjigama

Obrazovni materijali

Ostalo

Radovi u časopisima

Znanstveni i pregledni radovi

Stručni radovi

Drugi radovi u časopisima

Radovi u zbornicima skupova

Znanstveni radovi u zbornicima skupova

Drugi radovi u zbornicima skupova

Sažeci sa skupova

Sažeci u zbornicima i časopisima