Pregled po projektu: CEEPUS CIII-HR-0108
Pronađeno 30 radova
-
1.Vedran Mrzljak; Jan Kudláček; Đerzija Begić- Hajdarević; Jelena MusulinThe Leakage of Steam Mass Flow Rate through the Gland Seals – Influence on Turbine Produced Power // Pomorski zbornik - Journal of Maritime and Transportation Sciences, 58 (2020), 1; 39-56 doi:10.18048/2020.58.03. (međunarodna recenzija, članak, znanstveni)
-
2.Medica-Viola, Vedran; Baressi Šegota, Sandi; Mrzljak, Vedran; Štifanić, DanielComparison of conventional and heat balance based energy analyses of steam turbine // Pomorstvo : scientific journal of maritime research, 34 (2020), 1; 74-85 doi:10.31217/p.34.1.9 (međunarodna recenzija, članak, znanstveni)
-
3.Prpić-Oršić, Jasna; Mrzljak, Vedran; Baressi Šegota, Sandi; Lorencin, IvanSolver parameter influence on the results of multilayer perceptron for estimating power output of a combined cycle power plant // V INTERNATIONAL SCIENTIFIC CONFERENCE - SUMMER SESSION - INDUSTRY 4.0 - 2020 - PROCEEDINGS / Popov, Georgi ; Ovtcharova, Jivka (ur.).
Sofija: Scientific technical union of mechanical engineering “Industry - 4.0”, 2020. str. 8-11 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
4.Mrzljak, Vedran; Prpić-Oršić, Jasna; Medica- Viola, Vedran; Anđelić, NikolaThe change in energy flow streams for main marine propulsion steam turbine at different loads // XXVIII INTERNATIONAL SCIENTIFIC CONFERENCE - Trans & MOTAUTO 2020 - PROCEEDINGS / Kolev, Petar (ur.).
Sofija: Scientific technical union of mechanical engineering “Industry - 4.0”, 2020. str. 8-11 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
5.Mrzljak, Vedran; Prpić-Oršić, Jasna; Musulin, Jelena; Štifanić, DanielEnergy and exergy analysis of deaerator from combined-cycle power plant // INTERNATIONAL SCIENTIFIC CONFERENCE TECHNICS. TECHNOLOGIES. EDUCATION. SAFETY, 2020 - PROCEEDINGS - VOLUME 1 - TECHNICS AND TECHNOLOGY. INFORMATION TECHNOLOGY / Tokarev, Alexander (ur.).
Sofija: Scientific technical union of mechanical engineering “Industry - 4.0”, 2020. str. 5-8 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
6.Medica-Viola, Vedran; Mrzljak, Vedran; Anđelić, Nikola; Jelić, MaroAnalysis of Low-Power Steam Turbine With One Extraction for Marine Applications // Naše more : znanstveni časopis za more i pomorstvo, 67 (2020), 2; 87-95 doi:10.17818/NM/2020/2.1 (međunarodna recenzija, članak, znanstveni)
-
7.Poljak, Igor; Glavan, Ivica; Orović, Josip; Mrzljak, VedranThree Approaches to Low-Duty Turbo Compressor Efficiency Exploitation Evaluation // Applied Sciences-Basel, 10 (2020), 10; 3373, 20 doi:10.3390/app10103373 (međunarodna recenzija, članak, znanstveni)
-
8.Kocijel, Lino; Poljak, Igor; Mrzljak, Vedran; Car, ZlatanEnergy Loss Analysis at the Gland Seals of a Marine Turbo-Generator Steam Turbine // Tehnički glasnik - Technical Journal, Vol. 14 (2020), No. 1; 19-26 doi:10.31803/tg-20191031094436 (međunarodna recenzija, članak, znanstveni)
-
9.Baressi Šegota, Sandi; Anđelić, Nikola; Lorencin, Ivan; Saga, Milan; Car, ZlatanPath planning optimization of six-degree-of- freedom robotic manipulators using evolutionary algorithms // International journal of advanced robotic systems, 17 (2020), 2; 1-16 doi:10.1177/1729881420908076 (međunarodna recenzija, članak, znanstveni)
-
10.Mrzljak, Vedran; Prpić-Oršić, Jasna; Poljak, Igor; Baressi Šegota, SandiExergy analysis of steam condenser at various loads during the ambient temperature change // INTERNATIONAL SCIENTIFIC CONFERENCE MACHINES. TECHNOLOGIES. MATERIALS 2020 - Winter Session - PROCEEDINGS / Popov, Georgi ; Dikova, Tsanka (ur.).
Sofija: Scientific technical union of mechanical engineering “Industry-4.0”, 2020. str. 14-17 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
11.Mrzljak, Vedran; Prpić-Oršić, Jasna; Lorencin, Ivan; Anđelić, NikolaThermodynamic analysis of three-cylinder steam turbine from combined cycle power plant // INTERNATIONAL CONFERENCE TECHNICAL SCIENCES. INDUSTRIAL MANAGEMENT 2020 - PROCEEDINGS / Angelov, Cyril (ur.).
Sofija: Scientific technical union of mechanical engineering “Industry-4.0”, 2020. str. 23-26 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
12.Mrzljak, Vedran; Baressi Šegota, Sandi; Kocijel, Lino; Prpić-Oršić, JasnaEnergy (isentropic) analysis of three-cylinder steam turbine with re-heating // INTERNATIONAL SCIENTIFIC CONFERENCE HIGH TECHNOLOGIES. BUSINESS. SOCIETY 2020 - VOLUME I “HIGH TECHNOLOGIES” - PROCEEDINGS / Popov, Georgi ; Stavrev, Dimitar (ur.).
Sofija: Scientific technical union of mechanical engineering “Industry-4.0”, 2020. str. 29-32 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
13.Poljak, Igor; Orović, Josip; Mrzljak, Vedran; Bernečić, DeanEnergy and Exergy Evaluation of a Two-Stage Axial Vapour Compressor on the LNG Carrier // Entropy (Basel. Online), 22 (2020), 1; 1-20 doi:10.3390/e22010115 (međunarodna recenzija, članak, znanstveni)
-
14.Lorencin, Ivan; Anđelić, Nikola; Mrzljak, Vedran; Car, ZlatanMultilayer Perceptron approach to Condition- Based Maintenance of Marine CODLAG Propulsion System Components // Pomorstvo : scientific journal of maritime research, 33 (2020), 2; 181-190 doi:10.31217/p.33.2.8 (međunarodna recenzija, članak, znanstveni)
-
15.Baressi Šegota, Sandi; Lorencin, Ivan; Ohkura, Kazuhiro; Car, ZlatanOn the Traveling Salesman Problem in Nautical Environments: an Evolutionary Computing Approach to Optimization of Tourist Route Paths in Medulin, Croatia // Pomorski zbornik, 57 (2019), 1; 71-87 doi:10.18048/2019.57.05. (međunarodna recenzija, članak, znanstveni)
-
16.Baressi Šegota, Sandi; Anđelić, Nikola; Kudláček, Jan; Čep, RobertArtificial neural network for predicting values of residuary resistance per unit weight of displacement // Pomorski zbornik, 57 (2019), 1; 9-22 doi:10.18048/2019.57.01. (međunarodna recenzija, članak, znanstveni)
-
17.Mrzljak, Vedran; Anđelić, Nikola; Lorencin, Ivan; Car, ZlatanAnalysis of Gas Turbine Operation before and after Major Maintenance // Pomorski zbornik, 57 (2019), 1; 57-70 doi:10.18048/2019.57.04. (međunarodna recenzija, članak, znanstveni)
-
18.Kocijel, Lino; Mrzljak, Vedran; Čohodar Husić, Maida; Čekić, AhmetNumerical Analysis of Fuel Injector Nozzle Geometry - Influence on Liquid Fuel Contraction Coefficient and Reynolds Number // Pomorski zbornik, 57 (2019), 1; 23-45 doi:10.18048/2019.57.02. (međunarodna recenzija, pregledni rad, znanstveni)
-
19.Lorencin, Ivan; Anđelić, Nikola; Španjol, Josip; Car, ZlatanUsing multi-layer perceptron with Laplacian edge detector for bladder cancer diagnosis // Artificial intelligence in medicine, 102 (2019), 1-16 doi:10.1016/j.artmed.2019.101746 (međunarodna recenzija, članak, znanstveni)
-
20.Lorencin, Ivan; Anđelić, Nikola; Mrzljak, Vedran; Car, ZlatanGenetic Algorithm Approach to Design of Multi- Layer Perceptron for Combined Cycle Power Plant Electrical Power Output Estimation // Energies, 12 (2019), 22; 4352, 26 doi:10.3390/en12224352 (međunarodna recenzija, članak, znanstveni)
-
21.Mrzljak, Vedran; Orović, Josip; Poljak, Igor; Lorencin, IvanThe change in exergy efficiencies and losses of low-power steam turbine with steam extractions at three loads // Proceedings of International Conference on Innovative Technologies IN-TECH 2019 / Car, Zlatan ; Kudláček, Jan (ur.).
Rijeka: Faculty of Engineering, University of Rijeka, 2019. str. 33-37 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
22.Mrzljak, Vedran; Orović, Josip; Poljak, Igor; Anđelić, NikolaExergy analysis of high-pressure feed water heating system at three power plant loads // Proceedings of International Conference on Innovative Technologies IN-TECH 2019 / Car, Zlatan ; Kudláček, Jan (ur.).
Rijeka: Faculty of Engineering, University of Rijeka, 2019. str. 27-31 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
23.Mrzljak, Vedran; Taletović, Haris; Orović, Josip; Poljak, IgorSteam re-heating process influence on energy efficiency and losses of two-cylinder steam turbine // Proceedings of International Conference on Innovative Technologies IN-TECH 2019 / Car, Zlatan ; Kudláček, Jan (ur.).
Rijeka: Faculty of Engineering, University of Rijeka, 2019. str. 21-25 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
24.Anđelić, Nikola; Lorencin, Ivan; Mrzljak, Vedran; Car, ZlatanFriction modeling of robot manipulator joints // Proceedings of International Conference on Innovative Technologies IN-TECH 2019 / Car, Zlatan ; Kudláček, Jan (ur.).
Rijeka: Faculty of Engineering, University of Rijeka, 2019. str. 9-12 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
25.Mrzljak, Vedran; Blecich, Paolo; Anđelić, Nikola; Lorencin, IvanEnergy and Exergy Analyses of Forced Draft Fan for Marine Steam Propulsion System during Load Change // Journal of marine science and engineering, 7 (2019), 11; 381, 26 doi:10.3390/jmse7110381 (međunarodna recenzija, članak, znanstveni)
