Pregled po projektu: 152002
Pronađeno 172 radova
-
1.Klapan, Ivica; Kovač, Mario; Lončarić, Sven; Šimičić, Ljubimko; Raos, PeroVirtual reality and tele-3D-computer assisted surgery in otorhinolaryngology // Telemedicine and e-Health, Vol. 12, No. 2, Poster Presentations Abstracts P1–P94
San Diego (CA), Sjedinjene Američke Države: Mary Ann Liebert, 2006. str. 259-259 doi:10.1089/tmj.2006.12.250 (poster, međunarodna recenzija, sažetak, znanstveni) -
2.Raos, Pero; Matejiček, Franjo; Lucić, MirjanaNumerical analysis of stresses in adherend of single-lap adhesive joints // Proceedings the 3rd DAAAM International Conference on ATDC '04 / Katalinić, B. ; Veža, I. ; Bilić, B. (ur.).
Split : Beč: University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture ; DAAAM International, 2004. str. 171-176 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
3.Matejiček, Franjo; Raos, Pero; Lucić, MirjanaNumerical Analysis of Single-Lap Adhesive Joint // Extended abstracts of 4th International Congress of Croatian Society of Mechanics / Matejiček, Franjo (ur.).
Zagreb: Hrvatsko društvo za mehaniku (HDM), 2003. str. 323-330 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
4.Raos, Pero; Lucić, Mirjana; Matejiček, FranjoExperimental and Numerical Analysis of Lap Length Influence on Strength of Adhesively Bonded Joint // Proceedings of the 18^th Annual Meeting PPS-18 / Gaspar-Cunha, Antonio ; Nobrega, Joao Miguel (ur.).
Guimaraes: The Polymer Processing Society, 2002. str. P 017/1-P 017/6 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
5.Aračić, Stjepan; Šimunović, Katica; Šimunović, GoranErosion Resistance of Different Materials for Pump Impellers // Frontiers in Corrosion Science and Technology
Granada, 2002. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
6.Krumes, Dragomir; Aračić, Stjepan; Marušić, VlatkoThe effect of steel boriding layers on exposure to H2S // Proceedings of the 13th International DAAAM Symposium / Katalinić, Branko (ur.).
Beč: DAAAM, 2002. str. 289-290 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
7.Krumes, Dragomir; Kolumbić, Zvonimir; Vitez, Ivan; Aračić, StjepanInfluence of the boron phases on the materials ductility // Proceedings 1st DAAAM International Conference on Advanced Technologies for Developing Countries / Katalinić, Branko ; Kljajin, Milan (ur.).
Slavonski Brod: Strojarski fakultet Sveučilišta u Slavonskom Brodu, 2002. str. 211-216 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
8.Kozak, Dražan; Sedmak, Aleksandar; Adžiev Gjorgji; Gubeljak, NenadApplication of J-integral to strength mismatch welded structures // Proceedings of the 6th International Research/Expert Conference 'Trends in the development of machinery and associated technology' / Brdarević, Safet ; Ekinović, Sabahudin ; Compamys, Pascual Ramon (ur.).
Zenica: Mašinski fakultet Univerziteta u Zenici, 2002. str. 353-356 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
9.Kozak, Dražan; Ivandić, ŽeljkoStress triaxility as a measure of constraint by fracture mechanics specimens // Proceedings of the Techical Committee 15 of Youth International Measurements Confederation (IMEKO) Symposium on Experimental Solid Mechanics / Freddi, Alessandro ; Fragassa, Cristiano (ur.).
Bolonja: Bologna University, 2002. str. 65-66 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
10.Šimunović, Katica; Aračić, Stjepan; Šimunović, GoranComparison of Erosion Resistance of Bronzes and Chrome Cast Steel // Annals of DAAAM for 2001 and Proceedings of the 12th International DAAAM Symposium / Katalinić, Branko (ur.).
Beč: DAAAM International Vienna, 2001. str. 445 - 446 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
11.Aračić, Stjepan; Krumes, Dragomir; Budić, IvanEffects of Erosion and Corrosion Wear on construction Material in agresive environment // Zbornik radova Europen Corrosion Congress Eurocorr2001 / Bonora, T.L. (ur.).
Riva del Garda, 2001. str. 1-8 (poster, međunarodna recenzija, cjeloviti rad (in extenso), ostalo) -
12.Krumes, Dragomir; Vitez, Ivan; Marušić, Vlatko; Aračić, StjepanResearch into causes for occurence of microfissures on flank teeth of helical gear // 7th International Scientific Conference on Production Engineering – ; CIM 2001, Book of Procedings / Cebalo, R (ur.).
Zagreb: Hrvatska udruga proizvodnog strojarstva, 2001. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
13.Raos, Pero; Lucić, Mirjana; Matejiček, FranjoUtjecaj duljine prijeklopa na mehaničke karakteristike jednostrukog lijepljenog spoja // Tehnički vjesnik, 8 (2001), 3, 4; 15-22 (podatak o recenziji nije dostupan, prethodno priopćenje, znanstveni)
-
14.Kozak, DražanDoprinos numeričkoj i eksperimentalnoj analizi lomnog ponašanja heterogenih struktura, 2001., doktorska disertacija, Fakultet strojarstva i brodogradnje, Zagreb
-
15.Matejiček, Franjo; Kozak, DražanSome Remarks About 2-D and 3-D Finite Element Modelling of Fracture Toughness Specimens with Material and Geometric Mismatch // Proceedings of the second Slovenian-Japanese joint Seminar 'Welding Fracture Mechanics and Dynamic Loading' / Oblak, Maks ; Praunseis, Zdravko ; Toyoda, Masao ; Ohata, Mitsuri (ur.).
Maribor: Faculty of Mechanical Engineering, 2001. str. 1-8 (pozvano predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
16.Kozak, Dražan; Ivandić, ŽeljkoNumerical Determination of Stress Concentration and Material Yielding Factors for Welded Joints // Proceedings of the 7th International Scientific Conference on Production Engineering : Computer Integrated Manufacturing and High Speed Machining (CIM 2001) / Cebalo, Roko ; Schulz, Herbert (ur.).
Zagreb: Hrvatska udruga proizvodnog strojarstva (HUPS), 2001. str. V-019 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
17.Raos, Pero; Samardžić, Ivan; Tonković, ZlatkoExperimental investigation on aplication of anaerobic polymeric sealants in gas installations // Annals of DAAAM for 2001 & Proceedings of the 12th International DAAAM Symposium / Katalinić, Branko (ur.).
Beč: DAAAM International Vienna, 2001. str. 397-398 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
18.Schulz, Herbert; Stoić, Antun; Alexandar, SahmImprovement of cutting process in accordance with process disturbances // 7th International conference on production engineering CIM2001 / Cebalo R., Schulz H. (ur.).
Zagreb: Hrvatska udruga proizvodnog strojarstva, 2001. str. I123-I131 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
19.Cebalo, Roko; Stoić, AntunOptimization of the cutting speed at milling // 7th International scientific conference on production engineering CIM2001 / Cebalo R., Schulz, H. (ur.).
Zagreb: Hrvatska udruga proizvodnog strojarstva, 2001. str. I037-I045 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
20.Matejiček, Franjo; Gubeljak, Nenad; Kozak, Dražan; Kocak, MustafaStress-strain state at the vicinity of the crack tip in strength mis-match welded joint // Proceedings of the XIII European Conference on Fracture (CD-Room), Fracture Mechanics: Applications and Challenges / Fuentes, Manuel ; Elices, Manuel ; Meizoso, Antonio-Martin (ur.).
Oxford: Elsevier, 2000. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
21.Gubeljak, Nenad; Kozak, Dražan; Matejiček, FranjoPrediction of Strength Mis-match Welded Joints Failure by Using of Crack Driving Force Curve and Crack Tip Opening Displacement (CTOD) Resistance Curve // STROJARSTVO, 42 (2000), 3, 4; 85-101 (međunarodna recenzija, članak, znanstveni)
-
22.Grizelj, Branko; Math, MiljenkoTHE INFLUENCE OF PRESS ON ENHANCEMENT OF BENDING ACCURACY // 11th International DAAAM Sxmposium / Branko, Katalinić (ur.).
Beč: DAAAM International Vienna, 2000. str. 163-164 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), ostalo) -
23.Grizelj, Branko; Kenter, I.Muhlis; Grizelj, DejanCOMPUTER AIDED TOOL PLANNING FOR BENT COMPONENTS FOR SHET METAL // 5th International Research/Expert conference "Trends in the Development of Machinery and Associated Technology" / Satef, Brdarević ; Sabahudin, Ekinović (ur.).
Zenica: Mašinsku fakultet u Zenici, 2000. str. 154-161 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
24.Miljenko, Math; Grizelj, BrankoNUMERICAL SIMULATION OF COMBINED FORWARD-BACKWARD EXTRUSION TFHE BODY OF AUTOMATIC VALVE // ECCOMAS 2000 European Congress on computational Methods in Applied Science and Engineering - Proceeding on the CD ROM / - (ur.).
Barcelona: -, 2000. str. - (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
25.Grizelj, BrankoTHE INFLUENCE OF PRESS AND DIE ON ENHANCEMENT OF BENDING ACCURACY // 3rd International Congress of Croatian Society of Mechanics / Pavao, Marović (ur.).
Zagreb: Croatian society of mechanics, 2000. str. 651-658 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
