Pregled po projektu: 0152015
Pronađeno 51 radova
-
26.Ivandić, Željko; Kozak, Dražan; Kljajin, MilanThe Evaluation Procedure of Butt Weld Cruciform Detail // Proceedings of the 7th International Research/Expert Conference 'Trends in the Development of Machinery and Associated Technology' (TMT 2003) / Vivancos Calvet, Joan ; Puerta Sales, Ferran ; Ekinović, Sabahudin ; Brdarević, Safet (ur.).
Zenica : Barcelona: Faculty of Mechanical Engineering ; Escola Tecnica Superiora D'Enginyeria Industrial, 2003. str. 645-648 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
27.Gubeljak, Nenad; Kozak, Dražan; Matejiček, Franjo; Oblak, MaksExperimental and Numerical Analysis of Strength Overmatched Weld Root Passes on the Heat Affected Zone Fracture Behaviour // Extended Abstracts and Proceedings (CD-ROM Edition) of the 4th International Congress of Croatian Society of Mechanics / Matejiček, Franjo (ur.).
Zagreb: Hrvatsko društvo za mehaniku (HDM), 2003. str. 183-190 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
28.Sedmak, Aleksandar; Kozak, Dražan; Adžiev, Gorgi; Matejiček, Franjo; Gubeljak, NenadConservation Law of J Integral Type for Multi-Material Body // Extended Abstracts and Proceedings (CD-ROM Edition)of the 4th International Congress of Croatian Society of Mechanics / Matejiček, Franjo (ur.).
Zagreb: Hrvatsko društvo za mehaniku (HDM), 2003. str. 645-650 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
29.Matejiček, Franjo; Kozak, Dražan; Konjatić, PejoFracture Behaviour of High-Ductile CCT Specimen Under Elastic-Plastic Conditions // Extended Abstracts and Proceedings (CD-ROM Edition)of the 4th International Congress of Croatian Society of Mechanics / Matejiček, Franjo (ur.).
Zagreb: Hrvatsko društvo za mehaniku (HDM), 2003. str. 601-608 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
30.Sebastijanović, Slavko; Ergić, Todor; Ivandić, ŽeljkoDefining the Process of Designing Machine Elements Based on the Distribution of Reliability Factors // Proceedings of the 2nd DAAAM International Conference on Advanced Technologies for Developing Countries (ATDC'03) / Katalinić, Branko ; Tufekčić, Džemo ; Šelo, Ramiz (ur.).
Beč : Tuzla: DAAAM International ; University of Tuzla, 2003. str. 103-108 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
31.Kozak, Dražan; Kljajin, Milan; Semenski, DamirInfluence of the Stress-State on the J-Integral Value by Fracture Toughness Specimens with Medium Thickness // DAAAM International Scientific Book 2003 / Katalinic, Branko (ur.).
Beč: DAAAM International Vienna, 2003. str. 339-346 -
32.Kozak, Dražan; Ivandić, Željko; Kljajin, MilanDecision making model based on grading approach // Proceedings of the International Conference on Industrial Logistics / Barros, L. ; Helo, P. ; Kekäle, T. (ur.).
Vaasa: International Centre for Innovation and Industrial Logistics (ICIIL), 2003. str. 307-312 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
33.Kozak, Dražan; Gubeljak, Nenad; Matejiček, Franjo; Oblak, MaksDistribution of Stresses in the Vicinity of Straight Crack Front with Present Materials Dissimilarity // Proceedings of the 2003 International Conference on Computational & Experimental Engineering & Sciences / C.A. Herrera (ur.).
Encino (CA): Tech Science Press, 2003. (plenarno, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
34.Kozak, Dražan; Kljajin, Milan; Ivandić, ŽeljkoNew engineering concepts of structural integrity // Proceedings of the 2nd DAAAM International Conference on Advanced Technologies for Developing Countries (ATDC'03) / Katalinić, Branko ; Tufekčić, Džemo and Šelo, Ramiz (ur.).
Beč : Tuzla: DAAAM International ; University of Tuzla, 2003. str. 31-36 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
35.Kljajin, MilanFoundation of Information Modelling in Tools Development // ICIT 2003: 4th International Conference on Industrial Tools / Kuzman, Karl (ur.).
Celje: TECOS Slovenian Tool and Die Development Centre, 2003. str. 457-462 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
36.Opalić, Milan; Kljajin, Milan; Sebastijanović, SlavkoTehničko crtanje
Čakovec: Zinski d.d., 2003 -
37.Proceedings of the 1st DAAAM International Conference on Advanced Technologies for Developing Countries - ATDC'02 / Katalinić, Branko ; Kljajin, Milan (ur.). Slavonski Brod: DAAAM International Vienna, 2002 (zbornik)
-
38.Vnučec, ZdravkoINFLUENCE OF LAMINATION ANGLES ON THE STRESSES AND STRAINS VALUES IN THE LAMINATED COMPOSITE PLATES // ATDC’ ; 02 Proceedings of the 1st DAAAM International Conference on Advanced Technologies for Developing Countries / Katalinić, Branko (TU Vienna, Austria) & Kljajin, Milan (TU Osijek, Croatia) (ur.).
Slavonski Brod: DAAAM International Vienna ; University of Josip Juraj Strossmayer in Osijek ; Mechanical Engineering Faculty in Slavonski Brod ; Grafika Osijek, 2002. str. 93-98 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
39.Sebastijanović, Slavko; Ivandić, Željko; Ergić, TodorContribution to the Research on Sealing Large Surfaces // Proceedings of the 1st DAAAM International Conference Advanced Technologies for Developing Countries (ATDC'02) / Katalinić, Branko ; Kljajin, Milan (ur.).
Beč : Osijek: DAAAM International ; Mechanical Engineering Faculty of Slavonski Brod, 2002. str. 45-50 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
40.Hnatko, Emil; Majdandžić, Niko; Ergić, Todor; Stoić, Antun; Šarić, Tomislav; Jozić, Marko; Tadijanović, AdamApplication of the Milling Machine Vibration Signal for Cutter Condition Monitoring // Proceedings of the 1st DAAAM International Conference, Advanced Technologies for Developing Countries, ATDC'02 / Katalinić, Branko ; Kljajin, Milan (ur.). (ur.).
Osijek: DAAAM International Vienna& Mech. eng. Faculty Slav. Brod & Grafika Osijek, 2002. str. 483-488 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), pregledni) -
41.Ivandić, ŽeljkoKoncepcijsko vrednovanje konstrukcijskih značajki, 2002., doktorska disertacija, Fakultet strojarstva i brodogradnje, Zagreb
-
42.Kljajin, MilanApproaches to System Complexity in the Early Stage of Product Design // Proceedings of ESDA2002: 6th Biennial Conference on Engineering Systems Design and Analysis
Istanbul: ASME International, 2002. str. 1-6 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
43.Kljajin, MilanEvaluation of DFX Tools in Ecodesign // Proceedings of the 6th International Conference on Advanced Manufacturing Systems and Technology - AMST2002 / Kuljanic, Elso (ur.).
Beč : New York (NY): Springer, 2002. str. 679-686 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
44.Ivandić, Željko; Kljajin, Milan; Ergić, TodorThe Procedure For Defining Weight In Evaluation Conceptual Design // Annals of DAAAM for 2002 & Proceedings of the 13th International DAAAM Symposium "Inteligent Manufacturing & Automation : Learning from Nature" / Katalinic, Branko (ur.).
Beč: DAAAM International Vienna, 2002. str. 227-228 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
45.Kljajin, MilanSome Methods for Finding Product Solutions // Annals of DAAAM for 2002 & Proceedings of the 13th International DAAAM Symposium / Katalinic, Branko (ur.).
Beč: DAAAM International Vienna, 2002. str. 265-266 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
46.Raos, Pero; Matejiček, Franjo; Lucić, MirjanaExperimental investigation on mechanical characteristics of adhesively bonded single-lap joints // Proceedings of the 1st DAAAM International Conference, Advanced Technologies for Developing Countries, ATDC'02, / Katalinić, B. ; Kljajin, M. (ur.).
Slavonski Brod: DAAAM International & Mech. eng. Faculty Slav. Brod, 2002. str. 517-520 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
47.Kozak, Dražan; Kljajin, Milan; Semenski, DamirInfluence of the stress state on the J-integral value by fracture toughness specimens with medium thickness // Annals of DAAAM for 2002 & Proceedings of the 13th International DAAAM Symposium 'Intelligent Manufacturing & Automation: Learning from Nature' / Katalinić, Branko (ur.).
Beč: DAAAM International Vienna, 2002. str. 287-288 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
48.Kozak, Dražan; Gubeljak, Nenad; Matejiček, Franjo; Oblak, MaksSpreading of Plastic Zones by Heterogeneous Fracture Toughness Specimens Cracked in the HAZ // Proceedings of the 1st DAAAM International Conference on Advanced Technologies for Developing Countries / Katalinić, Branko ; Kljajin, Milan (ur.).
Osijek: Grafika Osijek, 2002. str. 35-40 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
49.Kozak, Dražan; Sedmak, Aleksandar; Adžiev Gjorgji; Gubeljak, NenadApplication of J-integral to strength mismatch welded structures // Proceedings of the 6th International Research/Expert Conference 'Trends in the development of machinery and associated technology' / Brdarević, Safet ; Ekinović, Sabahudin ; Compamys, Pascual Ramon (ur.).
Zenica: Mašinski fakultet Univerziteta u Zenici, 2002. str. 353-356 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
50.Stoić, AntunObradivost tvrdih materijala visokobrzinskim tokarenjem, 2002., doktorska disertacija, Fakultet strojarstva i brodogradnje, Zagreb
