Pregled po projektu: 0152015
Pronađeno 51 radova
-
1.Galeta, Tomislav; Kljajin, Milan; Karakašić; MirkoProduct Model Suited for the ERP System // Design 2006. Zbornik radova / Marjanović, Dorian (ur.).
Zagreb : Glasgow: Faculty of Mechanical Engineering and Naval Architecture & Design Society, 2006. str. 535-540 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
2.Ivandić, Željko; Kljajin, Milan; Duhovnik, JožeThe Model Evaluations of Product Properties in the Conceptual Phase // Proceedings of the Sixth International Sxmposium on Tools and Methods of Competitive Engineering (TMCE 2006) / Horváth, Imre ; Duhovnik, Jože (ur.).
Delft : Ljubljana: University of Technology ; Faculty of Mechanical Engineering, 2006. str. 1439-1451 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
3.Opalić, Milan; Kljajin, MilanBiomechanical Joints as Tribolgy System // Proceedings of the BalkanTrib '05 / Branko Ivkovic (ur.).
Kragujevac: Yugoslav Tribology Society, 2005. str. 415-419 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
4.Marušić, Vlatko; Kljajin, Milan; Penava, AndrijanaPossibility of tribological loss reduction by applying welded layers to the working parts of worm-presses in oil mills // Tehnički vjesnik/Technical Gazette, 12 (2005), 3/4; 11-16 (podatak o recenziji nije dostupan, prethodno priopćenje, znanstveni)
-
5.Galić, ZoranKoncipiranje, oblikovanje i metodička razrada peći na kruto gorivo, 2005., diplomski rad, Strojarski fakultet, Slavonski Brod
-
6.Proceedings of the 4th DAAAM International Conference on Advanced Technologies for Developing Countries - ATDC'05 / Kljajin, Milan ; Katalinić, Branko ; Budić, Ivan (ur.). Beč : Osijek : Slavonski Brod: DAAAM International Vienna ; Strojarski fakultet Sveučilišta u Slavonskom Brodu, 2005 (zbornik)
-
7.Ergić, Todor; Stoić, Antun; Konjatić, PejoDynamic Analysis of Machine and Worpiece Instability in Turning // Proceedings of the 4th International Conference Advanced Technologies for Developing Contries ATDC 2005 / Kljain, Milan ; Katalinić, Branko ; Budić, Ivan (ur.).
Slavonski Brod: Grafika Osijek, 2005. str. 497-502 (poster, međunarodna recenzija, cjeloviti rad (in extenso), ostalo) -
8.Kljajin, Milan; Ivandić, Željko; Karakašić, Mirko; Galić, ZoranConceptual Design in the Solid Fuel Oven Development // Proceedings the 4th DAAAM International Conference on Advanced Technologies for Developing Countries / Kljajin, Milan ; Katalinić, Branko ; Budić, Ivan (ur.).
Slavonski Brod : Beč: Mechanical Engineering Faculty of Mechanical Engineering ; DAAAM International, 2005. str. 109-114 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
9.Tunjić, Đuro; Kljajin, Milan; Maglić LeonUvođenje sustava upravljanja kvalitetom u visokoškolske ustanove // Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 12 (2005), 1/2; 39-47 (podatak o recenziji nije dostupan, članak, stručni)
-
10.Kljajin, MilanQuality Aspects in the Sector of Waste from Electrical and Electronic Equipment (WEEE) // AMST '05 Advanced Manufacturing Systems and Technology / Elso Kuljanic (ur.).
Beč : New York (NY): Springer, 2005. str. 663-672 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
11.Vnučec, Zdravko; Kljajin, MilanTHE ANALYSIS OF FAILURES OF THE LAMINATED COMPOSITE STRUCTURES WITH HOLES // Proceedings / 9th International Research/Expert Conference “ ; ; Trends in the Development of Machinery and Associated Technology” ; ; ; TMT 2005, ISBN 9958-617-28-5 / Dr. Sabahudin Ekinović, dr. Senay Yalcin, dr. Joan Vivancos Calvet (ur.).
Antalya: Faculty of Mechanical Engineering in Zenica, Bosnia and Herzegovina, etc., 2005. str. 1029-1032 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
12.Vnučec, ZdravkoKorištenje informacijske tehnologije u suvremenoj visokoškolskoj nastavi // 55. međunarodna konferencija o proizvodnji, inženjeringu, razvoju i modernizaciji proizvodnje Matematsko modeliranje mehaničkih oscilacija primjenom fenomenološke analize : knjiga sažetaka = 55th International Conference of Producing Engineering, Development and Modernization of Production (RIM 2005) Mathematical modeling of mechanical oscillations by applying phenomenological analysis : abstracts / Isak Karabegović, Milan Jurković, Vlatko Doleček (ur.).
Bihać: Društvo za robotiku BiH, 2005. str. 817-820 (plenarno, međunarodna recenzija, cjeloviti rad (in extenso), ostalo) -
13.Vnučec, ZdravkoANALYSIS OF THE LAMINATED COMPOSITE PLATE UNDER COMBINED LOADS // "RIM 2005 – ; Development and Modernization of Production", ISBN 99589262-0-2 / Isak Karabegović, Milan Jurković, Vlatko Doleček (ur.).
Bihać: Društvo za robotiku BiH, 2005. str. 143-148 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
14.Vnučec, Zdravko; Ergić, TodorUnapređenje obrazovne tehnologije u visokoškolskoj nastavi // Zbornik radova 7. međunarodnog naučno-stručnog skupa o dostignućima elektro i mašinske industrije = Proceedings 7th International Conference on Accomplishments of Electrical and Mechanical Industries DEMI 2005 / Rogić, Miroslav (ur.).
Banja Luka: Mašinski fakultet Banja Luka, 2005. str. 59-62 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), pregledni) -
15.Kozak, Dražan; Kljajin, Milan; Ivandić, ŽeljkoYield load solutions for X-shaped weldment with present mechanical heterogeneity // Annals of DAAAM for 2004 & Proceedings of the 15th International DAAAM Symposium / Katalinić, Branko (ur.).
Beč: DAAAM International Vienna, 2004. str. 233-234 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
16.Vojvodič-Tuma, Jelena; Celin, Roman; Šuštaršič, Borivoj; Kmetič, Dimitrij; Gubeljak, Nenad; Kozak, Dražan; Matejiček, Franjo; Kljajin, Milan; Semenski, DamirMedobratovalni pregledi cevovodov in tlačnih posod ter analitična analiza tlačne posode po ASME // Program and Book of abstracts of 12th Conference on Materials and Technology / Jenko, Monika (ur.).
Ljubljana: Inštitut za kovinske materiale in tehnologije, 2004. str. 116-116 (poster, međunarodna recenzija, sažetak, znanstveni) -
17.Kozak, Dražan; Vojvodič-Tuma, Jelena; Gubeljak, Nenad; Semenski, DamirFactors influencing the yielding constraint by cracked welded components // Program and book of abstracts of 12th Conference on Materials and Technology / Jenko, Monika (ur.).
Ljubljana: Inštitut za kovinske materiale in tehnologije, 2004. str. 79-79 (pozvano predavanje, međunarodna recenzija, sažetak, znanstveni) -
18.Kljajin, Milan; Galeta, TomislavMetrics for the PDM functionality of ERP system // Proceedings of the Design 2004 / Marjanović, Dorian (ur.).
Zagreb : Glasgow: Faculty of Mechanical Engineerign and Naval Architecture ; The Design Society, 2004. str. 859-864 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
19.Kljajin, Milan; Opalić, MilanProduct disassembly sequences approach in the early stages of product design // Proceedings of the Design 2004 / Marjanović, Dorian (ur.).
Zagreb : Glasgow: Faculty of Mechanical Engineering and Naval Architecture ; The Design Society, 2004. str. 1093-1098 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
20.Kljajin, Milan; Ivandić, Željko; Kozak, DražanMultiple attribute decision making towards most acceptable variant solution // Proceedings of the Design 2004 / Marjanović, Dorian (ur.).
Zagreb : Glasgow: Faculty of Mechanical Engineering and Naval Architecture ; The Design Society, 2004. str. 1425-1430 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
21.Vnučec, Zdravko; Kljajin, MilanThe influence of stress concentration on design of laminated composite structures // Proceedings of 8th International Research/Expert Conference "Trends in the Development of Machinery and Associated Technology", TMT 2004 / Ekinović, Sabahudin ; Brdarević, Safet ; Vivancos Calvet, Joan ; Puerta Sales, Ferran (ur.).
Zenica: Mašinski fakultet Univerziteta u Zenici, 2004. str. 439-442 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
22.Vnučec, Zdravko; Kozak, Dražan; Ergić, TodorThe influence of human behaviors on the sitting pressure distribution // Proceedings of 8th International Research/Expert Conference "Trends in the Development of Machinery and Associated Technology", TMT 2004 / Ekinović, Sabahudin ; Brdarević, Safet ; Vivancos Calvet, Joan ; Puerta Sales, Ferran (ur.).
Zenica: Mašinski fakultet Univerziteta u Zenici, 2004. str. 431-434 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
23.Kljajin, Milan; Kozak, Dražan; Ivandić, ŽeljkoCopper recovery from waste of electrical and electronic equipment // Annals of DAAAM for 2003 & Proceedings of the 14th INTERNATIONAL DAAAM SYMPOSIUM "Intelligent Manufacturing & Automation: Focus on Reconstruction and Development" / Katalinic, Branko (ur.).
Beč: DAAAM International Vienna, 2003. str. 231-232 (poster, međunarodna recenzija, cjeloviti rad (in extenso), pregledni) -
24.Kozak, Dražan; Blaj, Liliana; Matejiček, FranjoState of Stress Modelling by 2-D Finite Element Analysis of Fracture Toughness Specimens // Proceedings of the 6th International Conference on Boundary and Finite Element / Dobre, Ionel ; Faur, Nicolae (ur.).
Temišvar: Editura Politehnica, 2003. str. 303-312 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
25.Ergić, Todor; Vnučec, Zdravko; Muftić, OsmanTHE INFLUENCE OF THE REDUNDANT MOVING ON THE PRESSURE MAGNITUDE VARIATION BY MEN SITTING // Proceedings of the 4th International Congress of Croatian Society of Mechanics / Matejiček, Franjo (TU Osijek, Croatia) (ur.).
Zagreb: Croatian Society of Mechanics, Zagreb, 2003. str. 151-157 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
