Pregled po projektu: 0152014
Pronađeno 177 radova
-
151.Proceedings of the 1st DAAAM International Conference on Advanced Technologies for Developing Countries - ATDC'02 / Katalinić, Branko ; Kljajin, Milan (ur.). Slavonski Brod: DAAAM International Vienna, 2002 (zbornik)
-
152.Lujić, RobertoDoprinos modelu terminiranja u sustavu upravljanja pojedinačnom proizvodnjomn, 2002., doktorska disertacija, Strojarski fakultet, Slavonski Brod, Slavonski Brod
-
153.Sebastijanović, Nebojša; Ergić, Todor; Sebastijanović, SlavkoPlant reconstruction aimed at process rationalization // The 13th INTERNATIONAL DAAAM SYMPOSIUM “ ; ; Intelligent Manufacturing & Automation: Focus on Precision Engineering” ; ;
Beč, 2002. str. 23-26 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), pregledni) -
154.Dašić, Predrag; Wasilkowska, A.; Sebastijanović, Slavko; Blagojević, D.Development of the international standards in fields of manufacturing engineering // Research and development in mechanical industry RaDMI 2002 / Dašić, V. Predrag ; Radovanović, R. Miroslav (ur.).
Vrnjačka Banja: Institute IMK Kruševac, High technical mechanical school Trstenik, 2002. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), stručni) -
155.Lujić, Roberto; Šimunović, Goran; Matičević, GordanaScheduling in single production through the applying of 3-tournament steady-state selection genetic algorithm // 1st International Conference on Advanced Technologies for Developing Countries / Katalinić, Branko ; Kljajin, Milan (ur.).
Slavonski Brod: DAAAM International, Vienna, University of J.J. Strossmayer in Osijek, Mechanical engineering Faculty in Slavonski Brod, 2002. str. 331-337 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
156.Šarić, Tomislav; Majdandžić, Niko; Lujić, RobertoApplying of neural networks for determining the frequency of condition monitoring tasks // 13th International DAAAM Symposium “ ; ; Inteligent Manufacturing & Automation: Learning from Nature” ; ;
Beč, 2002. str. 487-489 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
157.Šarić, Tomislav; Majdandžić, NikoDetermining the frequency of condition based maintenance tasks with neural network // 1st DAAAMInternationalConference on Advanced Technologies for Developing Countries / Katalinić, Branko (ur.).
Slavonski Brod, 2002. str. 533 - 539 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
158.Matičević, Gordana; Majdandžić, Niko; Lujić, RobertoProject planning with impact of project risk // 1st DAAAMInternationalConference on Advanced Technologies for Developing Countries / Katalinić, Branko (ur.).
Slavonski Brod, 2002. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
159.Majdandžić, NikoERP sistemi za proizvodna preduzeća // 2nd International Conference “ ; ; ; Research and development in mechanical industry” ; ; ; RaDMI 2002
Vrnjačka Banja, 2002. str. 1293-1299 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
160.Majdandžić, NikoTechnological assumptions for entrance of countries in transition on demanding worldwide market // 2nd International Conference “ ; ; Research and development in mechanical industry” ; ; RaDMI 2002
Vrnjačka Banja, 2002. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), pregledni) -
161.Majdandžić, NikoTechnological development : precondition for entrance on international market // 1st DAAAM International Conference on Advanced Technologies for Developing Countries : preoceedings / Katalinić, Branko (ur.).
Slavonski Brod, 2002. str. 323-330 (pozvano predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
162.Sebastijanović, Slavko; Ivandić, Željko; Ergić, TodorContribution to the Research on Sealing Large Surfaces // Proceedings of the 1st DAAAM International Conference Advanced Technologies for Developing Countries (ATDC'02) / Katalinić, Branko ; Kljajin, Milan (ur.).
Beč : Osijek: DAAAM International ; Mechanical Engineering Faculty of Slavonski Brod, 2002. str. 45-50 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
163.Hnatko, Emil; Majdandžić, Niko; Ergić, Todor; Stoić, Antun; Šarić, Tomislav; Jozić, Marko; Tadijanović, AdamApplication of the Milling Machine Vibration Signal for Cutter Condition Monitoring // Proceedings of the 1st DAAAM International Conference, Advanced Technologies for Developing Countries, ATDC'02 / Katalinić, Branko ; Kljajin, Milan (ur.). (ur.).
Osijek: DAAAM International Vienna& Mech. eng. Faculty Slav. Brod & Grafika Osijek, 2002. str. 483-488 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), pregledni) -
164.Ivandić, ŽeljkoKoncepcijsko vrednovanje konstrukcijskih značajki, 2002., doktorska disertacija, Fakultet strojarstva i brodogradnje, Zagreb
-
165.Šimunović, GoranDoprinos modelu za automatiziranu izradu tehnologije u popjedinačnoj metaloprerađivačkoj industriji, 2002., doktorska disertacija, Strojarski fakultet, Slavonski Brod
-
166.Vitez, Ivan; Sebastijanović, Slavko; Tufekčić, DžemoThe conclusion messages from European annual conferences on quality // Proceedings Volume 2: Research and development in mechanical industry RaDMI 2002 / Dašić, V. Predrag ; Radovanović, R. Miroslav (ur.).
Vrnjačka Banja: Institute IMK Kruševac, High technical mechanical school Trstenik, 2002. str. 820-825 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), pregledni) -
167.Šimunović, Goran; Šimunović, KaticaStruktura integriranog varijantno-generativnog sustava za projektiranje tehnoloških procesa // ATDC 02 Proceedings of the 1st DAAAM International Conference on Advanced Technologies for Developing Countries / Katalinić, Branko ; Kljajin, Milan (ur.).
Slavonski Brod: DAAAM International Vienna, 2002. str. 363-368 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
168.Kljajin, MilanApproaches to System Complexity in the Early Stage of Product Design // Proceedings of ESDA2002: 6th Biennial Conference on Engineering Systems Design and Analysis
Istanbul: ASME International, 2002. str. 1-6 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
169.Kljajin, MilanEvaluation of DFX Tools in Ecodesign // Proceedings of the 6th International Conference on Advanced Manufacturing Systems and Technology - AMST2002 / Kuljanic, Elso (ur.).
Beč : New York (NY): Springer, 2002. str. 679-686 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
170.Ivandić, Željko; Kljajin, Milan; Ergić, TodorThe Procedure For Defining Weight In Evaluation Conceptual Design // Annals of DAAAM for 2002 & Proceedings of the 13th International DAAAM Symposium "Inteligent Manufacturing & Automation : Learning from Nature" / Katalinic, Branko (ur.).
Beč: DAAAM International Vienna, 2002. str. 227-228 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
171.Kljajin, MilanSome Methods for Finding Product Solutions // Annals of DAAAM for 2002 & Proceedings of the 13th International DAAAM Symposium / Katalinic, Branko (ur.).
Beč: DAAAM International Vienna, 2002. str. 265-266 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
172.Šimunović, Katica; Ivušić, Vinko; Grilec, KrešimirAbrasion Resistance Improvement of Vertical Turbine Pump Parts // Proceedings of the 3rd Aimeta International Tribology Conference : AITC 2002
Salerno: Italian Association for Theoretical and Applied Mechanics, 2002. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
173.Šimunović, Katica; Grilec, Krešimir; Šimunović, GoranAbrazijska otpornost NiCr i NiCrWC prevlaka // Proceedings of the 1st DAAAM International Conference on Advanced Technologies for Developing Countries / Katalinić, Branko ; Kljajin Milan (ur.).
Slavonski Brod: DAAAM International Vienna, 2002. str. 239-244 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
174.Aračić, Stjepan; Šimunović, Katica; Šimunović, GoranErosion Resistance of Different Materials for Pump Impellers // Frontiers in Corrosion Science and Technology
Granada, 2002. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
175.Kozak, Dražan; Kljajin, Milan; Semenski, DamirInfluence of the stress state on the J-integral value by fracture toughness specimens with medium thickness // Annals of DAAAM for 2002 & Proceedings of the 13th International DAAAM Symposium 'Intelligent Manufacturing & Automation: Learning from Nature' / Katalinić, Branko (ur.).
Beč: DAAAM International Vienna, 2002. str. 287-288 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
176.Siewert, Thomas; Samardžić, Ivan; Klarić, ŠtefanijaApplication of on-line weld monitoring system // Proceedings of the 1st DAAAM International Conference on Advanced Technologies for Developing Countries / Katalinić, Branko ; Kljajin, Milan (ur.).
Slavonski Brod: DAAAM International, Viena, 2002. str. 227-232 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
177.Samardžić, Ivan; Kolumbić, Zvonimir; Baotić, MarkoDoprinos primjeni praškom punjenih žica za zavarivanje MAG postupkom // Tehnički vijesnik, 8 (2002), 3, 4; 23-37 (podatak o recenziji nije dostupan, prethodno priopćenje, znanstveni)
