Pregled po CROSBI profilu: Juraj Ljubetić (CROSBI Profil: 8178, MBZ: 59924)
Pronađeno 26 radova
-
1.Mikac, Tonči; Ljubetić, JurajOrganizacija i upravljanje proizvodnjom / Benčić, Zvonko (ur.).
Zagreb: Graphis, 2009 -
2.Barić, IvanPROJEKT TEHNOLOŠKOG PROCESA GLAVČINE, 2006., diplomski rad, Tehnički fakultet, Rijeka
-
3.Perinić, MladenOptimizacija ciklusa izrade na fleksibilnom proizvodnom sustavu primjenom genetskih algoritama, 2004., doktorska disertacija, Tehnički fakultet u Rijeci, Rijeka
-
4.Mikac, Tonči; Perinić, Mladen; Ljubetić, JurajApplying genetic algorithms in activities of the cell formation // Annals & Proceedings of the 14th DAAAM International Symposium / Katalinić, Branko (ur.).
Beč: DAAAM International Vienna, 2003. str. 297-298 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
5.Perinić, Mladen; Ljubetić, JurajA genetic algorithm for working orders sequencing // MOTAUTO'01 / Technical University of Varna (ur.).
Varna, 2001. str. 83-85 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
6.Perinić, Mladen; Mikac, Tonči; Ljubetić, JurajApplying genetic alghorithm in process plan selection // Annals of DAAAM for 2001 & Proceedings of the 12th International DAAAM Symposium / Katalinic, Branko (ur.).
Beč: DAAAM International Vienna, 2001. str. 357-358 -
7.Smoljan, Božo; Ljubetić, JurajAn investigation of process planning of heat treatment // Integration of heat treatment and ssurface engineering in the manufacture of engineering components / Croatian Society for Heat Treatment and Surface Engineering (ur.).
Dubrovnik : Cavtat, 2001. str. 127-132 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
8.Mikac, Tonči; Ljubetić, JurajSoftware support for procution system activities // Proceedings / Ostholt, Heinrich (ur.).
Bielefeld: Fachhochschule Bielefeld & Rzeszóv University of Technology, 1999. str. 341-345 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
9.Ljubetić, Juraj; Cukor, GoranSelection program of alternative process plans // Proceedings / Cebalo, Roko (ur.).
Opatija: -, 1999. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
10.Ljubetić, Juraj; Cukor, GoranA Selection Method of Process Plans Set for Part Types Mix Production // AMST'99 - Advanced Manufacturing Systems and Technology / Kuljanić, Elso (ur.).
Beč : New York (NY): Springer, 1999. str. 315-322 -
11.Ljubetić, Juraj; Cukor, GoranSelection Program Of Alternative Process Plans // Computer Integrated Manufacturing And High Speed Machining / Cebalo, Roko ; Schulz, Herbert (ur.).
Zagreb: Hrvatska udruga proizvodnog strojarstva (HUPS), 1999. str. III073-III080 -
12.Mikac, Tonči; Ljubetić, JurajSoftware support for production system design activities // CAx Techniques / Ostholt, Heinrich (ur.)., 1999. str. 341-346
-
13.Ljubetić, JurajProcess plan selection in dynamic production environment // Proceedings of 9th DAAAM International Symposium, Vol.2 / Katalinić, Branko (ur.).
Cluj - Napoca, 1998. str. 275-276 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
14.Ljubetić, JurajProcess plan selection for simultateous production of different parts // Proceedings of 5th International Scientific-Technical Conference on Internal Combustion Engines and Motor Vehicles
Sofija, Bugarska, 1998. str. 119-124 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
15.Mikac, Tonči; Šestan, Anton; Ljubetić, JurajModeling of Manufacturing Structures in the Early projecting Phase // Business system management : proceedings of the 1st International conference Business system management-UPS’ ; 97 / Vlado Majstorović (ur.).
Mostar: University of Mostar, Faculty of Mechanical Engineering, 1997. str. 223-229 (poster, cjeloviti rad (in extenso), znanstveni) -
16.Ljubetić, JurajOptimization of workpiece holding in a precise machining // Proceedings / Damyanov D. (ur.).
Ruse, Bugarska: Union of Mechanical Engineering of Bulgaria, 1997. str. 138-143 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
17.Ljubetić, Juraj; Mikac, TončiComputer aid for machining process planning of high precision holes // Proceedings / Majstorović V, Katalinić B, Čović D. (ur.).
Mostar, Bosna i Hercegovina: University of Mostar and DAAAM International Vienna, 1997. str. 167-170 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
18.Mikac, Tonči; Ljubetić, JurajComputer aid for planning stocks on assembly line // Proceedings / Katalinić B. (ur.).
Dubrovnik, Hrvatska: DAAAM International Vienna, 1997. str. 227-228 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
19.Ljubetić, JurajThe optimization model of the sequence clamping in the precision machining // Proceedings / Oczos K.E. (ur.).
Rzeszów, Poljska: Rzeszow University of Technology, 1997. str. 376-383 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
20.Ljubetić, JurajHoles with increased precision-specific task for computer generation of the machining process // Proceedings / Sastry D.H, Dwarakadasa E.S. (ur.).
Bangalore, Indija: New Age International (P) Limited, Bangalore, 1997. str. 937-943 (pozvano predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
21.Ljubetić, JurajThe influence of some factors on the utilization of FMS // Zebranie sekcji podstaw technologii komitetu budowy maszyn pan, 57 (1997), 163-172 (podatak o recenziji nije dostupan, članak, znanstveni)
-
22.Ljubetić, JurajInfluence of proceeding sequence and working orders structure on the FMS efficiency // Zebranie sekcji podstaw technologii komitetu budowy maszyn pan, 57 (1997), 151-161 (podatak o recenziji nije dostupan, članak, znanstveni)
-
23.Mikac, Tonči; Ljubetić, JurajGroup analysis technique for preplanning cellurar manufacturing systems // Proceedings / Katalinić B. (ur.).
Beč, Austrija: DAAAM International Vienna, 1996. str. 277-278 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
24.Ljubetić, JurajDevelopment of optimization model for workpiece holding in precise machning with a sequence clamping // Bulletins for Applied and Computer Mathematics, 78 (1996), 1191; 103-112 (podatak o recenziji nije dostupan, članak, znanstveni)
-
25.Ljubetić, Juraj; Mikac, TončiComputer generation of the machining process for holes with increase precision // Proceedings / Katalinić B. (ur.).
Beč, Austrija: DAAAM International Vienna, 1996. str. 251-252 (poster, sažetak, znanstveni)
