Pregled po CROSBI profilu: Branimir Barišić (CROSBI Profil: 6168, MBZ: 238642)

1.

Novak-Marcinčin, Jozef; Kuric, Ivan; Mikac, Tonči; Barišić, Branimir

Computer Support for Improvement of Engineering and Manufacturing Activities. Prešov: Faculty of Manufacturing Technologies with the seat in Prešov, Technical University of Košice, 2009 (prirucnik)

2.

Barišić, Branimir

Concurrent Product and Technology Development. Rijeka: Fintrade & Tours, 2009 (monografija)

1.

Proceedings of International Conference on Innovative Technologies IN-TECH 2011 / Kudlaček, Jan ; Car, Zlatan ; Barišić, Branimir ; Pepelnjak, Tomaž ; Pakosta, Michal ; Kršulja, Marko (ur.). Prag: Tisk AS Jaroměř, 2011 (zbornik)

2.

Proceedings of International Conference on Innovative Technologies IN-TECH 2010 / Kudlaček, Jan ; Barišić, Branimir ; Velay, Xavier ; Ohkura, Kazuhiro (ur.). Prag: Tisk AS, 2010 (zbornik)

1.

Haračić, Senad; Barišić, Branimir; Car, Zlatan

Example of 3D Measurements and Analysis the Optical Eyepiece Holder // Development of Mechanical Engineering as a Tool for Enterprise Logistic Progress / Legutko, Stanislaw (ur.).
Poznań: Poznan University of Technology, 2006. str. 285-291

2.

Barišić, Branimir; Ikonić, Milan; Mikac, Tonči

Strain Energy Approach In Forming Processes Evaluation // Development of Mechanical Engineering as a Tool for the Enterprise Logistic Progress, CEEPUS / Legutko, Stanislaw (ur.).
Poznań: Poznan University of Technology, 2006. str. 177-186

3.

Barišić, Branimir; Pepelnjak, Tomaž; Kuzman, Karl

Modeling and Simulation of Deep Drawing Tinplate Rings // Sheet Metal 2005 / Geiger, M. ; Duflou, J. ; Shirvani, Kals, B. ; Singh, U. P. (ur.).
Zürich: Trans Tech Publications, 2005. str. 329-336

4.

Cukor, Goran; Kuljanić, Elso; Barišić, Branimir

Optimisation of Machining Process Using Evolutionary Algorithms // AMST'05 - Advanced Manufacturing Systems and Technology / Kuljanić, Elso (ur.).
Udine: Springer, 2005. str. 135-142

5.

Jurković, Milan; Tufekčić, Džemo; Barišić, Branimir

Reengineering of Manufacturing Technologies and Processes // Computer Intergrated Manufacturing and High Speed Machining / Cebalo, Roko; Schulz, Herbert (ur.).
Zagreb: Hrvatska udruga proizvodnog strojarstva (HUPS), 2001. str. VI 025 - VI 035

6.

Jurković, Milan; Leš, Peter; Barišić, Branimir; Jurković, Zoran

The Plastic Forming of Thin Walled Profiles From a Strip // Computer Integrated Manufacturing and High Speed Machining / Cebalo, Roko; Schulz, Herbert (ur.).
Zagreb: Hrvatska udruga proizvodnog strojarstva (HUPS), 2001. str. IV 069 - IV 080

7.

Jurković, Zoran; Hriešik, Anton; Barišić, Branimir; Gantar, Gašper

Mathematical Modelling and Minimization of the Tool Loading Force of Machining Process // Computer Integrated Manufacturing and High Speed Machining / Cebalo, Roko; Schulz, Herbert (ur.).
Zagreb: Hrvatska udruga proizvodnog strojarstva (HUPS), 2001. str. IV 059 - IV 067

8.

Jurković, Milan; Barišić, Branimir; Jurković, Zoran

Mathematical Modelling And Optimisation Of Machining Processes // Computer Integrated Manufacturing And High Speed Machining / Cebalo, Roko ; Shulz, Herbert (ur.).
Zagreb: Hrvatska udruga proizvodnog strojarstva (HUPS), 2000. str. I065-I076

1.

Županić Krmek, Dubravka; Barišić, Branimir; Međugorac, Marin

Analiza venskih tromboza liječenih na odjelu hematologije i kogaulacije u kliničkoj bolnici Sveti Duh // Liječnički vjesnik, glasilo hrvatskog liječničkog zbora, suplement, 139:1-106 (2017), 2; 21-22 (podatak o recenziji nije dostupan, članak, znanstveni)

2.

Antabak, Anko; Andabak, Matej; Barišić, Branimir; Papeš, Dino; Romić, Ivan; Fuchs, Nino; Luetić, Tomislav

Prijelomi nadlaktične kosti u djece – okolnosti i uzroci nastanka // Liječnički vjesnik : glasilo Hrvatskoga liječničkog zbora, 138 (2016), 74-78 (recenziran, članak, znanstveni)

hrcak.srce.hr

3.

Antabak, Anko; Brajčinović, Melita; Bradić, Lucija; Barišić, Branimir; Andabak, Matej; Halužan, Damir; Fuchs, Nino; Haramina, Tatjana; Ćurković, Selena; Luetić, Tomislav et al.

Egzotermna reakcija sadrenja - analiza triju vrsta sadrenih zavoja // Liječnički vjesnik : glasilo Hrvatskoga liječničkog zbora, 138 (2016), 250-254 (međunarodna recenzija, članak, znanstveni)

lijecnicki-vjesnik.hlz.hr hrcak.srce.hr

4.

Antabak, Anko; Barišić, Branimir; Andabak, Matej; Papeš, Dino; Romić, Ivan; Fuchs, Nino; Luetić, Tomislav

Prijelom kostiju šake u djece - okolnosti i uzroci nastanka // Liječnički vjesnik : glasilo Hrvatskoga liječničkog zbora, 137 (2015), 306-310 (recenziran, pregledni rad, znanstveni)

hrcak.srce.hr

5.

Antabak, Anko; Barišić, Branimir; Andabak, Matej; Bradić, Lucija; Brajčinovic, Melita; Haramina, Tatjana; Halužan, Damir; Fuchs, Nino; Ćurković, Selena; Luetić, Tomislav et al.

Fizikalna svojstva sadrenih zavoja // Liječnički vjesnik, 137 (2015), 11-12; 372-376 (međunarodna recenzija, članak, znanstveni)

hrcak.srce.hr

6.

Kršulja, Marko; Mijić, Saša; Barišić, Branimir; Car, Zlatan

Design and Planning of Clamping Work-holder Station for Sheet Metal Part of Car Body // Manufacturing and industrial engineering, 11 (2012), 2; 38-43 (podatak o recenziji nije dostupan, članak, znanstveni)

opac.lib.tuke.sk web.tuke.sk web.tuke.sk

7.

Pepelnjak, Tomaž; Magoč, Vladimir; Barišić, Branimir

Analysis of Shear Hat Test in Digital Environment // METALURGIJA, 51 (2012), 2; 153-156 (međunarodna recenzija, članak, znanstveni)

public.carnet.hr public.carnet.hr

8.

Plančak, Miroslav; Barišić, Branimir; Vilotić, Dragiša; Kacmarcik, Igor; Movrin, Dejan; Skakun, Plavka; Milutinović, Maladimir

Analytical and Numerical Solutions for Friction Calibration Curves (FCC) in Bulk Metal Forming // CA systems in production process planning, 12 (2011), 1; 107-110 (podatak o recenziji nije dostupan, članak, znanstveni)

9.

Lazanja, Matej; Barišić, Branimir; Car, Zlatan; Plančak, Miroslav

Accuracy Inspection of a Milling Machine with Ballbar System // CA systems in production process planning, 12 (2011), 1; 79-82 (podatak o recenziji nije dostupan, članak, znanstveni)

10.

Matković, Romeo; Kršulja, Marko; Barišić, Branimir; Plančak, Miroslav

CMM Measurement and Measurement Quality Plan for Dimension Control // CA systems in production process planning, 12 (2011), 1; 87-90 (podatak o recenziji nije dostupan, članak, znanstveni)

Pristup cjelovitom tekstu rada

11.

Budak, Igor; Soković, Mirko; Barišić, Branimir

Accuracy Improvement of Point Data Reduction with Sampling-Based Methods by Fuzzy Logic-Based Decision-Making // Measurement, 44 (2011), 6; 1188-1200 doi:10.1016/j.measurement.2011.03.026 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com pdn.sciencedirect.com dx.doi.org

12.

Ungureanu, Nicolae; Ungureanu, Miorita; Cotetiu, Adriana; Barišić, Branimir; Grozav, Sorin

Principles of the Maintenance Management // Scientific Bulletin. Serie C, Fascicle Mechanics, Tribology, Machine Manufacturing Technology, 14 (2010), 1; 69-72 (podatak o recenziji nije dostupan, članak, znanstveni)

www.nordtech.ubm.ro www.nordtech.ubm.ro

13.

Kuric, Ivan; Barišić, Branimir

Trends of Computer Support in Pre-Production Stage // Scientific Bulletin. Serie C, Fascicle Mechanics, Tribology, Machine Manufacturing Technology, 14 (2010), 43-48 (podatak o recenziji nije dostupan, članak, znanstveni)

www.nordtech.ubm.ro www.nordtech.ubm.ro

14.

Kršulja, Marko; Barišić, Branimir; Plančak, Miroslav; Čep, Robert;

Investigation Of Alluminium Alloy Composition AlSi9Cu3 Alloy In Foundury Process // Technologické inžinierstvo / Technological engineering, 7 (2010), 2; 53-56 (podatak o recenziji nije dostupan, članak, znanstveni)

Pristup cjelovitom tekstu rada

15.

Barišić, Branimir; Mamuzić, Ilija; Nastran, Miha

Improvement of sheet metal forming technology by aplicationof different software aproaches // Transactions of FAMENA, 34 (2010), 1; 29-38 (međunarodna recenzija, članak, znanstveni)

16.

Plančak, Miroslav; Kuzman, Karl; Barišić, Branimir; Vilotić, Dragiša; Čupković, Djordje

Analysis of the Double Backward Extrusion Process // Cercetări metalurgice şi de noi materiale, VIII (2010), 2; 15-21 (podatak o recenziji nije dostupan, članak, znanstveni)

17.

Rucki, Miroslaw; Barišić, Branimir; Ocenasova, Lenka

Dynamic Calibration of Air Gauges // Archiwum Technologii Maszyn i Automatyzacji, 30 (2010), 2; 129-135 (podatak o recenziji nije dostupan, članak, znanstveni)

www.atmia.put.poznan.pl

18.

Dražić, Ivan; Barišić, Branimir; Mujaković, Nermina; Čep, Robert

Implementation of Shishkin mesh in the modelling of spring-mass system // Sborník vědeckých prací Vysoké školy báňské-Technické univerzity Ostrava. Řada strojní (1992), LVI (2010), 1; 49-52 (podatak o recenziji nije dostupan, članak, znanstveni)

19.

Barišić, Branimir; Cukor, Goran; Radošević, Marko

Hardness Measurement by Means of PCE 2000 Hardness Tester Using Leeb Method // Výrobné inžinierstvo, IX (2010), 3; 77-80 (podatak o recenziji nije dostupan, članak, znanstveni)

20.

Benčić, Marijan; Barišić, Branimir; Varga, Gyula; Miroslav Plančak

Technology of Roller Bed Belt Conveyor Manufacture by Implemention of CAD-CAM Connection // Engineering review : znanstveni časopis za nove tehnologije u strojarstvu, brodogradnji i elektrotehnici, 30 (2010), 1; 1-12 (podatak o recenziji nije dostupan, članak, znanstveni)

21.

Jermak, Czeslaw Janusz; Barišić, Branimir; Rucki, Miroslaw

Correction of the Metrological Properties of the Pneumatic Length Measuring Gauges through Changes of the Measuring Nozzle Head Surface Shape // Measurement, 43 (2010), 9; 1217-1227 doi:10.1016/j.measurement.2010.06.001 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com www.sciencedirect.com

22.

Matysiak, Waldemar; Barišić, Branimir; Mamuzić, Ilija

Elaboration of The Technology of Forming a Conical Product of Sheet Metal // Metalurgija, 49 (2010), 1; 13-18 (međunarodna recenzija, članak, znanstveni)

public.carnet.hr

23.

Barišić, Branimir; Mamuzić, Ilija; Nastran, Miha;

Improvement in Sheet Metal Forming Technology due to the Use of Different Software Aproaches // Transactions of FAMENA, 34 (2010), 1; 29-38 (međunarodna recenzija, članak, znanstveni)

famena.fsb.unizg.hr

24.

Matysiak, W.; Barišić, B.; Mamuzić, Ilija

Elaboration of the technology of forming a conical product of sheet metal // Metalurgija, 49 (2010), 1; 13-17 (međunarodna recenzija, članak, znanstveni)

hrcak.srce.hr

25.

Rucki, Miroslaw; Barišić, Branimir; Varga, Gyula

Air Gauges as a Part of the Dimensional Inspection Systems // Measurement, 43 (2010), 1; 83-91 doi:10.1016/j.measurement.2009.07.001 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com www.sciencedirect.com

26.

Unguraenu, Nicolae; Ungureanu, Miorita; Cotetiu, Radu; Barišić, Branimir

Planning and Scheduling in Maintenance // Scientific Bulletin. Serie C, Fascicle Mechanics, Tribology, Machine Manufacturing Technology, XXIII (2009), serie c; 169-173 (podatak o recenziji nije dostupan, članak, znanstveni)

nordtech.ubm.ro

27.

Deželjin, Dejan; Barišić, Branimir; Szalay, Tibor; Kršulja, Marko

Creating A Palette Bow Tipper With Technology Of Deformation // Engineering review : znanstveni časopis za nove tehnologije u strojarstvu, brodogradnji i elektrotehnici, 29 (2009), 1; 71-79 (podatak o recenziji nije dostupan, prethodno priopćenje, znanstveni)

www.riteh.hr

28.

Rucki, Miroslaw; Barišić, Branimir

Response Time of Air Gauges With Different Volumes of The Measuring Chambers // Metrology and Measurement Systems, XVI (2009), 2; 289-298 (međunarodna recenzija, članak, znanstveni)

29.

Car, Zlatan; Barišić, Branimir; Rucki, Miroslaw

Emergent Synthesis Based Multi-Objective Design of the Manufacturing System Shop-Floor // Strojniški vestnik, 55 (2009), 9; 523-530 (međunarodna recenzija, članak, znanstveni)

www.sv-jme.eu

30.

Kršulja, Marko; Barišić, Branimir; Kudlaček, Jan

Assembly Setup for Modular Fixture Machining Process // Advanced engineering, 3 (2009), 1; 39-51 (podatak o recenziji nije dostupan, članak, znanstveni)

Pristup cjelovitom tekstu rada

31.

Car, Zlatan; Barišić, Branimir; Kršulja, Marko

Simulation and Modelling of Paths Processing Time in a Flexible Manufacturing System // Výrobné inžinierstvo, VIII (2009), 3; 40-45 (podatak o recenziji nije dostupan, članak, znanstveni)

Pristup cjelovitom tekstu rada opac.lib.tuke.sk

32.

Kršulja, Marko; Štefančić, Mauro; Barišić, Branimir

Forming Processes in Manufacture of An Access Cover and Control of Position Tolerances // Výrobné inžinierstvo, VIII (2009), 3; 33-39 (podatak o recenziji nije dostupan, članak, znanstveni)

Pristup cjelovitom tekstu rada

33.

Plančak, Miroslav; Kuzman, Karl; Barišić, Branimir; Vilotić, Dragiša; Lužanin, Ognjan

Non - Homogeneity of Wall Thickness In Tube Hydroforming // Cercetări metalurgice şi de noi materiale, XVII (2009), 4; 1-8 (podatak o recenziji nije dostupan, članak, znanstveni)

34.

Dražić, Ivan; Barišić, Branimir; Jurasić, Katica

Modeling of orthoptic curve associated to couple of circles // Technologické inžinierstvo / Technological engineering, 6 (2009), 2; 13-16 (podatak o recenziji nije dostupan, članak, znanstveni)

35.

Car, Zlatan; Ohkura, Kazuhiro; Barišić, Branimir

Application of Multi-Agent Technology and Heterarhical Architecture for Production Scheduling // Engineering review : znanstveni Časopis za nove tehnologije u strojarstvu, brodogradnji i elektrotehnici, 29 (2009), 1; 1-10 (podatak o recenziji nije dostupan, članak, znanstveni)

36.

Soković, Mirko; Barišić, Branimir; Sladić, Saša

Model of Quality Management of Hard Coatings on Ceramic Cutting Tools // Journal of Materials Processing Technology, 209 (2009), 8; 4207-4216 doi:10.1016/j.jmatprotec.2008.11.026 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

37.

Pepelnjak, Tomaž; Barišić, Branimir

Computer-assisted engineering determination of the formability limit for thin sheet metals by a modified Marciniak method // Journal of Strain Analysis for Engineering Design, 44 (2009), 6; 459-472 doi:10.1243/03093247JSA503 (međunarodna recenzija, članak, znanstveni)

doi journals.pepublishing.com

38.

Car, Zlatan; Barišić, Branimir; Ikonić, Milan

GA Based CNC Turning Center Exploitation Process Parameters Optimization // Metalurgija, 48 (2009), 1; 47-50 (podatak o recenziji nije dostupan, prethodno priopćenje, znanstveni)

public.carnet.hr

39.

Barišić, Branimir; Ungureanu, Nicolae; Car, Zlatan

Investigation of Forming Force at Backward Extrusion Process on Different Aluminum Materials // Scientific Bulletin. Serie C, Fascicle Mechanics, Tribology, Machine Manufacturing Technology, XXII (2008), 1; 21-27 (podatak o recenziji nije dostupan, članak, znanstveni)

www.nordtech.ubm.ro

40.

Barišić, Branimir; Ungureanu, Mioriţa; Car, Zlatan

A Numerical Approach to the Establishment of a Sheet Metal Forming Process Technology // Annals of University of Petroşani. Mechanical Engineering, 10 (2008), 1; 11-22 (podatak o recenziji nije dostupan, članak, znanstveni)

41.

Čep, Robert; Neslušan, Miroslav; Barišić, Branimir

Chip Formation Analysis During Hard Turning // Strojarstvo, 50 (2008), 6; 337-346 (međunarodna recenzija, članak, znanstveni)

42.

Mijić, Saša; Barišić, Branimir; Kudlaček, Jan

Technology of Metal Drawer Manufacture by Implemention of CAD-CAM Connection // Engineering Review, 28 (2008), 1; 73-83 (podatak o recenziji nije dostupan, prethodno priopćenje, znanstveni)

www.riteh.hr

43.

Dražić, Ivan; Barišić, Branimir; Mujaković, Nermina

The implementation of iterative outer approximation method for elasto-plastic torsion problem // Technologické inžinierstvo / Technological engineering, 5 (2008), 1; 37-39 (podatak o recenziji nije dostupan, članak, znanstveni)

44.

Barišić, Branimir; Pepelnjak, Tomaz; Math, Miljenko

Predicting of the Lueders bands in the processing of TH material in computer environment by means of stochastic modeling // Journal of Materials Processing Technology, 203 (2008), 1-3; 154-165 doi:10.1016/j.jmatprotec.2007.09.054 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada doi www.sciencedirect.com

45.

Ungeruanu, Nicolae; Barišić, Branimir; Ungeruanu, Miorita

Consideration about Reliability of Gears // CA systems in production process planning, 9 (2008), 1; 77-80 (podatak o recenziji nije dostupan, članak, znanstveni)

46.

Barišić, Branimir; Car, Zlatan; Ikonić, Milan

Analysis of different modeling approach at determining of backward extrusion force on AlCu5PbBi material // Metalurgija, 47 (2008), 4; 313-316 (međunarodna recenzija, članak, znanstveni)

hrcak.srce.hr

47.

Sladić, Saša; Barišić, Branimir; Soković, Mirko

Cost-Effective Power Converter for Thin Film Solar Cell Technology and Improved Power Quality // Journal of Materials Processing Technology, 201 (2008), 1-3; 786-792 doi:10.1016/j.jmatprotec.2007.11.161 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

48.

Rucki, Miroslaw; Barišić, Branimir; Szalay, Tibor

Analysis of Air Gage Inaccuracy Caused by Flow Instability // Measurement, 41 (2008), 6; 655-661 doi:10.1016/j.measurement.2007.10.001 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

49.

Ikonić, Milan; Barišić, Branimir; Blažević, Dalibor

Identifikacija i kvantifikacija materijala izrade tijekom projektiranja proizvodnje odljevaka // Metalurgija, 46 (2007), 3; 179-184 (međunarodna recenzija, pregledni rad, znanstveni)

pubwww.srce.hr

50.

Ikonić, Milan; Barišić, Branimir; Mikac, Tonči

Organizational Forms // Manufacturing Engineering, 6 (2007), 1; 59-61 (podatak o recenziji nije dostupan, članak, znanstveni)

51.

Barišić, Branimir; Math, Miljenko; Grizelj, Branko

Analytic, Numerical, And Stochastic Comparison Of Forming Force Modeling At Deep Drawing And Backward Extrusion On The Same Al 99.5 F7 Parts // Key engineering materials, 344 (2007), 419-426 doi:10.4028/www.scientific.net/KEM.344.419 (međunarodna recenzija, članak, znanstveni)

doi www.scientific.net

52.

Barišić, Branimir; Pepelnjak, Tomaž; Kuzman, Karl

Numerical-Stochastic Modeling and Simulation of Deep Drawing Tinplate Rings // Advanced Materials Research, 6-8 (2005), 329-336 (međunarodna recenzija, članak, znanstveni)

53.

Ikonić, Milan; Barišić, Branimir; Car, Zlatan

Strain Energy Approach In Stamping Process Design // Journal of Manufacturing Engineering, 4 (2005), 1; 79-81 (podatak o recenziji nije dostupan, članak, znanstveni)

54.

Barišić, Branimir; Spaić, Savo; Markoli, Boštjan

Effect Of Temperature-Rate Parameters On Mechanical And Metallographic Properties Of Tinplates T4 And T5 // Journal of Manufacturing Engineering, III (2005), 3; 23-26 (podatak o recenziji nije dostupan, članak, znanstveni)

55.

Mikac, Tonči; Barišić, Branimir; Car, Zlatan

Numerical Simulation of Tinplate Rings Forming // Manufacturing Engineering, III (2005), 3; 39-42 (podatak o recenziji nije dostupan, članak, znanstveni)

56.

Barišić, Branimir; Cukor, Goran; Math, Miljenko

Estimate of consumed energy at backward extrusion process by means of modelling approach // Journal of materials processing technology, 153-154 (2004), 907-912 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada

57.

Maričić, Sven; Barišić, Branimir; Car, Zlatan

Stochastic and Genetic Algorithm Comparison for Production Scheduling in a Flexible Manufacturing System // Engineering Review, 23 (2003), 31-44 (podatak o recenziji nije dostupan, članak, znanstveni)

1.

Komar, Sanjin; Barišić, Branimir; Matković, Romeo

Measurement and Analysis of Twin-Screw Supercharger Cover Measures // Engineering Review, 26 (2006), 49-62 (podatak o recenziji nije dostupan, članak, stručni)

2.

Juričić, Ivan; Barišić, Branimir; Hercigonja, Tomislav; Šćulac, Loris

Measurement of Jig For Inspection of Fan-Housing by Means of Optical 3D Coordinate Measuring System Tritop // Engineering Review, 26 (2006), 39-48 (podatak o recenziji nije dostupan, članak, stručni)

3.

Petohleb, Milenko; Barišić, Branimir; Bužan, Marko

3D-Measurement and Analysis of Measures for the Housing of a Turbo-Charger // Engineering Review, 25 (2005), 49-62 (podatak o recenziji nije dostupan, članak, stručni)

1.

Međugorac, Marin; Barišić, Branimir; Županić Krmek, Dubravka

Iskustvo našeg centra u primjeni ibrutiniba u liječenju relapsno-refraktorne kronične limfocitne leukemije-prikaz slučaja // Liječnički vjesnik: glasilo Hrvatskog liječničko društva, suplement, 139 (2017), 2; 77-77 (podatak o recenziji nije dostupan, članak, ostalo)

2.

Ungureanu, Nicolae; Năsui, Vasile; Barišić, Branimir; Alexandrescu, Marius

Maintenance Efficiency Indicators of Systems // Scientific Bulletin. Serie C, Fascicle Mechanics, Tribology, Machine Manufacturing Technology, 23 (2009), 1; 357-361 (podatak o recenziji nije dostupan, izvorni znanstveni rad, znanstveni)

3.

Sladić, Saša; Barišić, Branimir; Ungureanu, Nicolae

Adoption of active power H-bridge filter to vibration compensator for machining processes // Journal Manufacturing Engineering, 7 (2008), 3; 80-86 (podatak o recenziji nije dostupan, izvorni znanstveni rad, znanstveni)

4.

Car, Zlatan; Barišić, Branimir; Novak; Jozef

Multy Objective Evolutionary Based Scheduling // Jourrnal Manufacturing Engineering, 7 (2008), 2; 47-51 (podatak o recenziji nije dostupan, izvorni znanstveni rad, znanstveni)

5.

Cep, Robert; Barišić, Branimir

Testing of Ceramic Cutting Tools with an Interrupted Cut Simulator // Engineering Review, 28 (2008), 1; 11-16 (podatak o recenziji nije dostupan, izvorni znanstveni rad, znanstveni)

www.riteh.hr

6.

Barišić, Branimir; Rucki, Miroslaw; Car, Zlatan

Analysis of Digitizing and Traditional Measuring System at Surface Measurement of Lids // Key Engineering Materials, 381-382 (2008), 217-221 (podatak o recenziji nije dostupan, izvorni znanstveni rad, znanstveni)

7.

Grizelj, Branko; Plančak, Miroslav; Barišić, Branimir

Numerical Simulation of Combined Forward-Backward Extrusion // Key Engineering Materials, 367 (2008), 193-201 (podatak o recenziji nije dostupan, izvorni znanstveni rad, znanstveni)

8.

Barišić, Branimir; Grizelj, Branko; Plancak, Miroslav

Modeling Approach for Determination of Backward Extrusion Strain Energy on AlCu5PbBi // Key Engineering Materials, 367 (2008), 221-230 (podatak o recenziji nije dostupan, izvorni znanstveni rad, znanstveni)

9.

Rucki, Miroslaw; Barišić, Branimir

Improvement of Air Gauges Metrological Properties through Constructional Changes // Strojírenská technologie, 5 (2007), XII; 199-203 (podatak o recenziji nije dostupan, izvorni znanstveni rad, znanstveni)

10.

Grizelj, Branko; Barišić, Branimir; Math, Miljenko

FEM in Plate Bending // Key Engineering Materials, 344 (2007), -; 269-276 (podatak o recenziji nije dostupan, izvorni znanstveni rad, znanstveni)

www.scientific.net www.scientific.net

1.

Kršulja, Marko; Barišić, Branimir.; Pomenić, Loreta; Car, Zlatan; Šikulec, Leon.

Thin Metal Material TH 415 Composition Testing // 13th International Scientific Conference Automation in Production Planning and Manufacturing / Kuric, Ivan (ur.).
Žilina: Scientific and Technical Society at the University of Žilina, 2012. str. 133-139 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

2.

Hodak, Marko; Barišić, Branimir; Katalinić, Branko; Kršulja, Marko; Car, Zlatan

Flatness of Mechanical Interface of Housing Filter: Comparing Methods // Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAM Symposium / Katalinić, Branko (ur.).
Beč: DAAAM International Vienna, 2011. str. 1381-1382 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

3.

Jurjević, Marin; Barišić, Branimir; Katalinić, Branko; Kršulja, Marko; Car, Zlatan

Suitable Devices for Measuring Roughness on Oil Filter Housing // Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAM Symposium / Katalinić, Branko (ur.).
Beč: DAAAM International Vienna, 2011. str. 1351-1352 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

4.

Despot, Veselka; Barišić, Branimir; Katalinić, Branko; Kršulja, Marko; Car, Zlatan;

Radioscopic measurement on fuel filter support: inspection for health of material // Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAM Symposium / Katalinić, Branko (ur.).
Beč: DAAAM International Vienna, 2011. str. 1359-1360 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

5.

Bogović, Iva-Nicol; Barišić, Branimir; Katalinić, Branko; Kršulja, Marko; Car, Zlatan

Digitizing system ATOS - measuring turbo compressor housing // Annals of DAAAM for 2011 & Procedingd of the 22nd International DAAAM Symposium / Katalinić, Branko (ur.).
Beč: DAAAM International Vienna, 2011. str. 1367-1368 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

6.

Barišić, Branimir; Kuzmanović, Siniša; Rackov, Milan

Effect of External Loads at the Output Shaft End of Universal Worm Gear Reductor on its Thermal Capacity // International Scientific Conference ''Research and Development of Mechanical Elements and Systems'' / Miltenović, Vojislav (ur.).
Niš: SVEN, Niš, University of Niš, Mechanical Engineering Faculty, 2011. str. 535-540 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

7.

Barišić, Branimir; Jurjević, Marin; Plančak, Miroslav

Comparison of Device for Measuring Surface Roughness // Proceedings / Kuric, Ivan (ur.).
Žilina: University of Zilina, 2011. str. 9-14 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

8.

Éles, Imre; Szalay, Tibor; Barišić, Branimir

Adjustable Positioning Using Deformation of V-Blocks // International Conference on Innovative Technologies IN-TECH / Kudlaček, Jan ; Car, Zlatan ; Barišić, Branimir ; Pepelnjak, Tomaž ; Pakosta, Michal ; Kršulja, Marko (ur.).
Prag: Tisk AS Jaroměř, 2011. str. 183-187 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

9.

Lazanja, Matej; Barišić, Branimir; Car, Zlatan

Considerations on the use of Ballbar System in Accuracy Assessment of the Triaxial CNC Machine Tool // International Conference on Innovative Technologies IN-TECH / Kudlaček, Jan ; Car, Zlatan ; Barišić, Branimir ; Pepelnjak, Tomaž ; Pakosta, Michal ; Kršulja, Marko (ur.).
Prag: Tisk AS Jaroměř, 2011. str. 762-764 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

10.

Gregov, Goran; Žic, Samir; Kršulja, Marko; Barišić, Branimir; Kudlaček, Jan

Some Considerations on a Molding Simulation for a Polyethylene Product // International Conference on Innovative Technologies IN-TECH / Kudlaček, Jan ; Car, Zlatan ; Barišić, Branimir ; Pepelnjak, Tomaž ; Pakosta, Michal ; Kršulja, Marko (ur.).
Prag: Tisk AS Jaroměř, 2011. str. 790-793 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

11.

Božić, Denis; Kršulja, Marko; Barišić, Branimir; Matković, Romeo; Lazanja, Matej

Investigation of an a Quallity Measurement Plan for an Alternator Carrier on a CMM Machine // Quality and Innovation in Engineering and Management / Sorin Popescu, Stelian Brad & Daniela Popescu (ur.).
Cluj - Napoca: Editura U.T.Press, 2011. str. 27-30 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

12.

Gregov, Goran; Kršulja, Marko; Barišić, Branimir; Lukovics, Imrich

A Study of Plastic Processing and Tool Design for a Polypropylene Product // 8th International Tools Conference, Procedings ITC 2011 / Composite autors (ur.).
Zlín: Tomas Bata University in Zlin, Faculty of Technology, 2011. str. 156-161 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

13.

Plančak, Miroslav; Vilotić, Dragiša; Kuzman, Karl; Barišić, Branimir

Experimental Determination of Friction Coefficient in Tube Hydroforming // Proceedings of 1st International Scientific Conference on Engineering ”Manufacturing and Advanced Technologies” / Rahmić, Samir (ur.).
Mostar: University Djemal Bijedic of Mostar, 2010. str. 211-217 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

14.

Barišić, Branimir; Plančak, Miroslav; Kuzman, Karl

Sheet Metal Forming Strategy for Advanced Production in Computer Aided Manufacturing // Proceedings of 10th International Scientific Conference "New Ways in Manufacturing" Technologies / Karol, Vasilko (ur.).
Prešov: Technical University Kosiciach, 2010. str. 52-61 (pozvano predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

15.

Barišić, Branimir; Math, Dino Miljenko; Plančak, Miroslav

Implementation of Different Sheet Metal Forming Methods for Development of Mobile Holder Production // Proceedings of 11th International Conference Automation in Production Planning and Manufacturing / Kuric, Ivan (ur.).
Žilina: University of Žilina, 2010. str. 9-18 (pozvano predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

16.

Barišić, Branimir; Miroslav, Plančak; Car, Zlatan

Analysis of Nonhomogeneous Yielding by Means of Different Intelligent System Based on Stochastic and Finite Element Method // Proceeding of The 14th Asia Pacific Symposium on Intelligent and Evolutionary Systems / Ohkura, Kazuhiro (ur.).
Hiroshima: Hiroshima University, 2010. str. 326-334 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

17.

Plančak, Miroslav; Vilotić, Dragiša; Barišić, Branimir

FE Simulation of Inhomogeneity in Tube Hydroforming // Proceeding of 13th International Scientific Conference Mechanical Engineering 2010 / Roland, Janco (ur.).
Bratislava: Slovak University of Technology in Bratislava, 2010. str. 102-110 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

18.

Štimac, Sanjin; Katalinić, Branko; Cesarec, Paulina; Radošević, Marko; Barišić, Branimir

Measurement of the closing force on the medical bottles // Annals of DAAAM for 2010 & Proceedings / Katalinić, Branko (ur.).
Beč: DAAAM International Vienna 2010, 2010. str. 1523-1524 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

19.

Radošević, Marko; Katalinić, Branko; Cesarec, Paulina; Štimac, Sanjin; Barišić, Branimir

Making device for torque initiation which is appliedin torquewrench calibration // Annals of DAAAM for 2010 & Proceedings / Katalinić, Branko (ur.).
Beč: DAAAM International Vienna 2010, 2010. str. 1521-1522 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

20.

Pilvousek, Tomáš; Tatíček, František; Roleček, Lubomír; Barišić, Branimir

The Effect of Strain Rate on the Propreties and Microstructure of the DC 06 Steel // Proceedings of International Conference on Innovative Technologies IN-TECH / Kudlaček, Jan ; Barišić, Branimir ; Velay, Xavier ; Ohkura, Kazuhiro (ur.).
Prag: Tisk AS Jaroměř, 2010. str. 628-637 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

21.

Kudláček, Jan; Chaber, Petr; Barišić, Branimir

New Possibilities of Degreasing Process Evaluation // Proceedings of International Conference on Innovative Technologies IN-TECH / Kudlaček, Jan ; Barišić, Branimir ; Velay, Xavier ; Ohkura, Kazuhiro (ur.).
Prag: Tisk AS Jaroměř, 2010. str. 624-631 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

22.

Szalay, Tibor; Székely, Ferenc; Barišić, Branimir

Some Experimental Results in Moulding of Glass Lenses // International Conference on Innovative Technologies IN-TECH 2010 / Kudlaček, Jan ; Barišić, Branimir ; Velay, Xavier ; Ohkura, Kazuhiro (ur.).
Prag: Tisk AS Jaroměř, 2010. str. 453-462 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

23.

Dražić, Ivan; Mujaković, Nermina; Barišić, Branimir

The Numerical Approximations of the Solution for the Piston Problem With Viscous Compressible Micropolar Fluid // Proceedings of International Conference on Innovative Technologies (IN-TECH) / Kudlaček, Jan ; Barišić, Branimir ; Velay, Xavier ; Ohkura, Kazuhiro (ur.).
Prag: Tisk AS Jaroměř, 2010. str. 375-384 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

24.

Czeslaw, Janusz; Rucki, Miroslaw; Barisic, Branimir

Examinations of Characteristics of Pneumatic Follower for Profile Measurement // Proceedings of International Conference on Innovative Technologies IN-TECH / Kudlaček, Jan ; Barišić, Branimir ; Velay, Xavier ; Ohkura, Kazuhiro (ur.).
Prag: Tisk AS Jaroměř, 2010. str. 197-202 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

25.

Plančak, Miroslav; Barišić, Branimir; Vilotić, Dragiša; Lužanin, Ognjen

Radial Stress in Cold Backward Extrusion: Upper Bound and Analytical Solution // Proceedings of International Conference on Innovative Technologies IN-TECH / Kudlaček, Jan ; Barišić, Branimir ; Velay, Xavier ; Ohkura, Kazuhiro (ur.).
Prag: Tisk AS Jaroměř, 2010. str. 14-19 (pozvano predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

26.

Plančak, Miroslav; Barišić, Branimir; Vilotić, Dragiša; Mladomir, Milutinović; Lužanin, Ognjen

Identification of Stress State in Cold Backward Extrusion of Steel // Proceeding of 7th International Conference on Mechanical Engineering 2010 / Gabor, Stepan (ur.).
Budimpešta: Budapest University of Technology and Economics, Faculty of Mechanical Engineering, 2010. str. 294-300 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

27.

Barišić, Branimir; Rucki, Miroslaw; Čep, Robert; Čepová, Lenka; Náprstková, Natasa

Application of Total Station for Measuring Purpose in Shipbuilding Industry // New Technology Knowledge and Information / Náprstková, Natasa ; Novák, Martin (ur.).
Ústí na Labi: Department of Technology and Material Engineering, Faculty of Production Technology and Management, J.E. Purkyne University in Ústi nad Labem, Czech Republic., 2010. str. 20-28 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

28.

Fulop, Istvan; Gyenge, Csaba; Barišić, Branimir

Some Practical Aspects of Risk Based Maintenance Implementation in Paper Industry // Proceeding of 9th International Conference Modern Technologies In Manufacturing / Gyenge, Csaba (ur.).
Cluj - Napoca: Technical University Of Cluj-Napoca, 2009. str. 95-98 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

29.

Šegan, Danijel; Kršulja, Marko; Barišić, Branimir; Gyenge, Csaba

Flexible Program for Continuos Temperature Monitoring With the Use Of a Thermocouple // Proceeding of 9th International Conference Modern Technologies In Manufacturing / Gyenge, Csaba (ur.).
Cluj - Napoca: Technical University Of Cluj-Napoca, 2009. str. 269-272 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

30.

Lužanin, Ognjan; Plančak, Miroslav; Barišić, Branimir

Gesture Recognition Using Data Glove and Ann-Based Processor // Proceeding of 10th International Scientific Conference MMA 2009 Flexible Technologies / Kovač, Pavel (ur.).
Novi Sad: Univerzitet u Novom Sadu, 2009. str. 214-217 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

31.

Rucki, Miroslaw; Barišić, Branimir; Ocenašova, Lenka

Dynamic Calibration Of Air Gauges // Proceedings of the 13th National & 4th International Conference „Metrology in Production Engineering” / Wieczorowski, Michal (ur.).
Poznań: Agencja Reklamowa COMPRINT, 2009. str. 403-407 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

32.

Kršulja, Marko; Barišić, Branimir; Kudlaček, Jan

Comprehensive Study of Strip Selection and Weld Errors in a Steel Tube Erw Welding Process // The 20th INTERNATIONAL DAAAM SYMPOSIUM / Katalinić, Branko (ur.).
Beč: DAAAM International Vienna, 2009. str. 683-684 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

33.

Ocenašova, Lenka; Gapinski, Bartosz; Čep, Robert; Gregova, Linda; Barišić, Branimir; Novakova, Jana; Petrkovska, Lenka

Roundness Deviation Measuring Strategy at Coordination Measuring Machines and Conventional Machines // Proceedings of World Academy of Science, Engineering and Technology-WCSET 2009: "World Congress on Science, Engineering and Technology 2009" / Ardil, Cemal (ur.).
Singapur: World Academy of Science, Engineering and Technology, 2009. str. 629-632 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

34.

Barišić, Branimir; Plancak, Miroslav; Nastran, Miha

Computer Aided Development of Forming Technologies For Tool Holder Module Production // 7. International Conference on Industrial Tools and Material Processing Technologies / Gasper, Gantar (ur.).
Celje: TECOS-Slovenian Tool and Die Development Centre, 2009. str. 283-287 (pozvano predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

35.

Dražić, Ivan; Barišić, Branimir; Jurasić, Katica

Modeling of orthoptic curve associated to couple of circles // Progressive Methods in Manufacturing Technologies / Stančekova, Dana (ur.).
Žilina: Scientific-technical society by University of Zilina and Department of Machining and Manufacturing Engineering, 2009. str. 21-24 (ostalo, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

36.

Barišić, Branimir; Mamuzić, Ilija; Čep, Robert

Production Supported by Combination of Different Software in Sheet Metal Forming // Management of Technology – Step to Sustainable Production / Čosić, Predrag (ur.).
Zagreb, 2009. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

37.

Plančak, Miroslav; Vilotić, Dragiša; Barišić, Branimir; Movrin, Dejan; Pepelnjak, Tomaž

Die Stressing in Forward Cold Extrusion of Low Carbon Steel // Proceeding of 20th International Conference on Production Research / Ming, Li (ur.).
Shanghai: International Foundation for Production Research (IFPR), 2009. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

38.

Čep, Robert; Sadilek, Marek; Ocenašova, Lenka; Brychta, Josef; Hatala, Michal; Barišić, Branimir

Testing of DISAL D240 and D420 Ceramic Tool Materials with an Interrupted Cut Simulator // Proceedings of World Academy of Science, Engineering and Technology-ICME 2009:"International Conference on Mechanical Engineering" / Brojack, B. (ur.).
Tokyo: World Academy of Science, Engineering and Technology, 2009. str. 334-350 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

39.

Vilotić, Dragiša; Plančak, Miroslav; Movrin, Dejan; Milutinović, Mladomir; Barišić, Branimir

Theoretical and FE analysis of Contact Stresses at Upsetting of Prismatic Specimen by Cylindrical Dies // Proceeding of 22. MicroCAD International Scientific Conference / Lehoczky Laszlo (ur.).
Miskolc: University of Miskolc, 2009. str. 65-71 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

40.

Car, Zlatan; Barišić, Branimir; Kršulja, Marko

Creating Virtual Models of Production Equipment For Simulation of a Manufacturing Process System // 10th International Scientific Conference, Automation in Production Planning and Manufacturing / Kuric, Ivan (ur.).
Žilina: University of Žilina, Faculty of Mechanical Engineering, 2009. str. 38-44 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

41.

Barišić, Branimir; Čep, Robert; Legutko, Stanislav

Modelling of a Complex Product-Shaker by means of Solidworks Software // Procedings of International Conference ERIN 2009 / P. Milčak ; Robert, Čep ; Jana, Novakova (ur.).
Ostrava: Technical University of Ostrava, Faculty of Mechanical Engineering, 2009. str. 1-9 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

42.

Barišić, Branimir; Kršulja, Marko

Measurement Technique and E-enviroment // EQIBELT( Education Quality Improvement by E-learning Technology), Workshop 3rd Policy workshop on pedagogical opportunities of E-learning, Workshop on earning support centres, Workshop on course in E-Learning enviroment / Bekić, Zoran ; Kučina Softić, Sandra (ur.).
Rijeka: University Of Zagreb, University Computing Centre Srce, 2008. str. 283-288 (pozvano predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

43.

Wierczorowski, Kazimier; Legutko, Stanislav; Barišić, Branimir

Spotters Wear Investigation // Proceeding of International Symposium ‘ ’ Progresive Methods in Manufacturing Technologies’ ’ / Stančekova, dana (ur.).
Žilina: Scientific-Tehnical Society University of Zilina, 2008. str. 118-122 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

44.

Kršulja, Marko; Barišić, Branimir; Kudlaček, Jan

Locating, Study of a Workholding Solution // Proceedings 2008, 6th International conference on Computer Aided Design and Manufacturing / Obsieger Boris (ur.).
Rijeka: Zigo, 2008. str. 31-32 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

45.

Kršulja, Marko; Barišić, Branimir; Car, Zlatan

Considerations and Use of the Genetic Algorithm in Optimization of Standard Fixture Components // The 19th International DAAAM SYMPOSIUM "Intelligent Manufacturing & Automation: Focus on Next Generation of Intelligent Systems and Solutions" / Katalinić, Branko (ur.).
Beč: DAAAM International Vienna, 2008. str. 731-732 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

46.

Barišić, Branimir; Kuric, Ivan; Legutko, Stanislaw

Lüders’ Bands And Hall-Patch Equation // Proceedings of the International Conference System-Equipment-Processes SOP 2008 / Jan Duda (ur.).
Krakov: Cracow University of Technology, 2008. str. 11-18 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

47.

Hrivnak, Radovan; Barišić, Branimir; Bečka, Jan

The Contactless Scanning of Objects-Virtual 3D Model Creating // Proceedings of the International Conference System-Equipment-Processes SOP 2008 / Jan Duda (ur.).
Krakov: Cracow University of Technology, 2008. str. 128-132 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

48.

Car, Zlatan; Barišić, Branimir; Sladic, Saša

GA Based Design and Production Planing // Proceedings of the 9th International Scientific Conference ” New Ways in Manufacturing Technologies” / Karol Vasilko (ur.).
Prešov: Technical University Kosiciach, 2008. str. 15-19 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

49.

Sladić, Saša; Car, Zlatan; Barišić, Branimir

Evolutionary Based Production Planning // Proceedings of 9th International Scientific Conference "Automation in Production Planning and Manufacturing" / Ivan Kuric (ur.).
Žilina: University of Zilina, 2008. str. 252-258 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

50.

Rucki, Miroslaw; Barišić, Branimir

Improvement of Air Gauges Metrological Properties through Constructional Changes // Proceedings of the 2nd International Scientific Conference New Technology Knowledge and Information / Novak Martin (ur.).
Ústí na Labi: University J. E. Purkyne-Usti nad Labem, 2008. str. 120-122 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

51.

Dražić, Ivan; Barišić, Branimir; Mujaković, Nermina

The implementation of iterative outer approximation method for elasto-plastic torsion problem // Progressive Methods in Manufacturing Technologies / Stančekova, Dana (ur.).
Žilina: Scientific-technical society by University of Zilina and Department of Maching and Automation, 2008. str. 11-15 (ostalo, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

52.

Gyenge, Csaba; Barišić, Branimir; Boca, Valentin

The Analyse of Contact Contour and the Relative Spiral Feed During Orbital Deformation // Proceedings of the 8th International Conference „ Modern Technologies in manufacturing” MTeM / Gyenge Csaba (ur.).
Cluj - Napoca: MTeM, 2007. str. 179-183 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

53.

Balc, Nicolae; Berce, Petru; Pacurar, Razvan; Barišić, Branimir

Using the CAD Compensation Factors to Improve the Accuracy of the SLS Parts // Proceedings of the 8th International Conference „ Modern Technologies in manufacturing” / Gyenge Csaba (ur.).
Cluj - Napoca: MTeM, 2007. str. 42-48 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

54.

Kršulja, Marko; Barišić, Branimir; Sladić, Saša

Optimization of Deformation for Milling Operation Using 3-2-1 Clamping Method // Proceedings of the 12th International DAAAM Workshop CA Systems and Technologies / Katalinic Branko ; Kuric Ivan (ur.).
Beč: UŽ-Faculty of Mechanical Engineering, 2007. str. 97-104 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

55.

Barišić, Branimir; Rucki, Miroslaw; Čalić, Bruno; Gomerčić, Mladen

The Measuring Comparison between Nocontact Digitizing System and Contact Coordinate Measuring System // Proceedings of the 9th International Conference on Management of Innovative Technologies / Junkar Mihael (ur.).
Piran: TAVO Slovene Society for Abrasive Water Jet Technology, 2007. str. 144-151 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

56.

Barišić, Branimir; Sladić, Saša; Soković, Mirko

Numerical Approach for DC 01 Sheet Metal Drawer Forming // Proceedings of the 10th Advances in Materials and Processing Technologies / Im. Y. T ; M. S. J. Hashmi (ur.).
Daejeon: by Korea Advanced Institute of Science and Technology-KAIST, 2007. str. 629-639 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

57.

Barišić, Branimir; Gyenge, Csaba; Balc, Nicolae

Production Philosophy for Modern Manufacturing on Trumph Trumatic Presses in Computer Environment // Proceedings of the 8th International Conference „ Modern Technologies in manufacturing” MTeM / Gyenge Csaba (ur.).
Cluj - Napoca: MTeM, 2007. str. 47-52 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

58.

Barišić, Branimir; Car, Zlatan; Kuzman, Karl

Evaluation of Different Analytic Models Accuracy at Backward Extrusion Force on AlCu5PbBi // Proceedings of the 12th International Conference On Tools ICT-2007 / Dudas Illes, Szabo Otto, Varga Gyula (ur.).
Miskolc: Department of Production Engineering-University of Miskolc, 2007. str. 287-293 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

59.

Dusevic, Hrvoje: Car, Zlatan: Barišić, Branimir

Machining Center Efficiency Optimization Using Artificial Intelligence // Annals of DAAAM for 2007 & Proceedings of the 18th International DAAAM Symposium / B. Katalinic (ur.).
Beč: DAAAM International Vienna, 2007. str. 132-133 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

60.

Ikonić, Milan; Car, Zlatan; Barišić, Branimir

Modern Organizational Concepts and Methods of Production Management // Proceedings of the 5th DAAAM International Conference on Advanced Technologies for Developing Countries : ATDC 2006 / Mikac, Tonči ; Katalinić, Branko (ur.).
Rijeka : Beč: University of Rijeka, Faculty of Engineering ; DAAAM, 2006. str. 291-297 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

61.

Barišić, Branimir; Kršulja, Marko; Car, Zlatan

Preliminary GA Based Optimization In Process Of Jig Design For Milling Processes // Proceedings of the 17th International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Mechatronics & Robotics" / Katalinic, B. (ur.).
Beč: DAAAM International Vienna, 2006. str. 029-030 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

62.

Crljenko, Domagoj; Barišić, Branimir; Car, Zlatan

Optimization Of Tool Motion On A 2-Dimensional Surface By Means Of The Genetic Algorithm // Proceedings of the 5th International DAAAM Conference Advanced Technologies for Developing Countries-ATDC 2006 / Mikac, T. ; Katalinić, B (ur.).
Rijeka: University of Rijeka-Faculty of Engineering, DAAAM International Vienna, 2006. str. 159-164 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

63.

Blažević, Dalibor; Mikac, Tonči; Barišić, Branimir

Manufacturing Execution System For Continuous Casting // Automation in production planning and manufacturing : proceedings of the 7th International scientific conference / Kuric, I. (ur.).
Žilina: University of Zilina, 2006. str. 17-22 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

64.

Maričić, Sven; Barišić, Branimir; Car, Zlatan

Stochastic Algorithm Application In Project Management For Limited Series Production // Proceedings of the 5th International DAAAM Conference "Advanced Technologies for Developing Countries" (ATDC 2006) / Mikac, T. ; Katalinić, Branko (ur.).
Rijeka: University of Rijeka, Faculty of Engineering, 2006. str. 281-286 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

65.

Ikonić, Milan; Mikac, Tonči; Barišić, Branimir

Organic Structures // 8th international scientific conference New Ways in Manufacturing Technologies 2006 : proceedings / Monka, Peter (ur.).
Prešov: Technical University Kosiciach-Preshov, 2006. str. 311-316 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

66.

Car, Zlatan; Barišić, Branimir; Math, Miljenko Dino

Modeling And Simulation Of Tinplate Container Lids Stamping Process // Trends in the Development of Machinery and Associated Technology / Ekinović, S. ; Vivancos, J. ; Yalcin, S. (ur.).
Barcelona : Lloret de Mar: Escola Tecnica Superior D Enginyeria Industrial de Barcelona ; Faculty of Mechanical Engineering in Zenica ; Bahcesehir University Istanbul, 2006. str. 173-176 (poster, cjeloviti rad (in extenso), znanstveni)

67.

Barišić, Branimir; Sladić, Saša; Gomerčić, Mladen

Digitizing Measurement And Shapes Inspection By Means Of Advanced Topometric Optical Sensors (ATOS) // 10th International Research/Expert Conference Trends in the Development of Machinery and Associated Technology (TMT 2006) : proceedings / Ekinović, S. ; Vivancos, J. ; Yalcin, S. (ur.).
Barcelona : Lloret de Mar: Escola Tecnica Superior D Enginyeria Industrial de Barcelona ; Faculty of Mechanical Engineering in Zenica ; Bahcesehir University Istanbul, 2006. str. 637-641 (poster, cjeloviti rad (in extenso), znanstveni)

68.

Blažević, Dalibor; Barišić, Branimir; Ikonić, Milan

Optimization of Continuous Casting Workflow // Annals of DAAAM for 2005 & Proceedings of the 16th International DAAAM Symposium / Katalinić, Branko (ur.).
Beč: DAAAM International Vienna, 2005. str. 29-30 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

69.

Barišić, Branimir; Car, Zlatan; Mikac, Tonči, Ikonić, Milan

Computer Simulation of Hollow Tinplate Part Manufacturing // Proceedings of 6th International Scientific-Technical Conference Automation and CA Systems in Technology Planning and in Manufacturing / Novak-Marcincin, Josef (ur.).
Herl'any: TU Košice, 2005. str. 16-20 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

70.

Barišić, Branimir; Cukor, Goran; Sladić, Saša

Analysis and Simulation of Active Power Filter Including Fuzzy Logic Controller // Proceedings of the Asian Conference on Industrial Automation and Robotics / Afzulpukar, Nitin (ur.).
Bangkok: The Asian Institute of Technology, 2003. str. 183-188 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

71.

Barišić, Branimir; Jurković, Milan; Kostan, Ivan

Numerical-experimental analysis of deep drawing process on Al99.5F7 // Trends in the Development of Machinery and Associated Technology, TMT 2003 / Calvet, Joan Vivancos ; Sales, Ferran Puerta ; Ekinović, Sabahudin ; Brdarević, Safet (ur.).
Zenica : Barcelona: Faculty of Mechanical Engineering in Zenica ; Escola Tecnica Superior D Enginyeria Industrial de Barcelona, 2003. str. 137-140 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

72.

Barišić, Branimir; Jurković, Milan; Kuzman, Karl

Numerical-experimental analysis of backward extrusion Al 99.5 F7 // Computer Integrated Manufacturing and High Speed Machining ISBN 953-97181-4-7 / Cebalo, Roko ; Schulz, Herbert (ur.).
Zagreb: Hrvatska udruga proizvodnog strojarstva, 2002. str. IV001-IV009 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

73.

Barišić, Branimir; Jurković, Milan; Bračić, Zoran

Stochastic Modeling Of Backward Extrusion Force on Al 99.5 F7 // Forming Technology, Tools and Machines ISBN: 80-214-2162-2 / Forejt, Milan (ur.).
Brno: Institute of Technology, Faculty of Mechanical Engineering, University of Technology, 2002. str. 201-206 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

74.

Barišić, Branimir

Modeling Approach for the Determining of Backward Extrusion Force // Intelligent Manufacturing & Automation: Learning from Nature ISBN: 3-901509-29-1 / Katalinić, Branko (ur.).
Beč: DAAAM International Vienna, 2002. str. 023-024 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

75.

Jurković, Milan; Šestan, Anton; Barišić, Branimir

Modelling Of Stress State In Metal Forming Processes // FORM 98 / Forejt, Milan (ur.).
Brno: Technical Univerity of Brno, 1998. str. 55-60 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1.

Barišić, Branimir; Zupančić-Šalek, Silva; Županić Krmek, Dubravka; Međugorac, Marin; Galić, Edvard; Faletar, J.

Characteristics of venous thromboembolism following COVID-19 in Croatia // Thrombosis research, 200 (2021), Suppl 1
online, 2021. str. S47-S47 doi:10.1016/S0049-3848(21)00230-9 (poster, recenziran, sažetak, znanstveni)

doi

2.

Car, Zlatan; Barišić, Branimir; Kršulja, Marko

Machining center efficiency optimization based on evolutionary algorithm // Metallurgy, vol. 47, no.3 / Ilija Mamuzić (ur.).
Zagreb: Hrvatsko Metalurško Društvo (8, 2008), 2008. str. 280-280 (predavanje, međunarodna recenzija, sažetak, znanstveni)

hrcak.srce.hr; htpp public.carnet.hr

3.

Kršulja, Marko; Barišić, Branimir; Car, Zlatan

Optimization of 3-2-1 clamping method in milling operations // Metallurgy, vol. 47, no.3 / Mamuzić, Ilija (ur.).
Zagreb: Hrvatsko Metalurško Društvo, 2008. str. 270-270 (predavanje, međunarodna recenzija, sažetak, znanstveni)

hrcak.srce.hr; htpp public.carnet.hr

4.

Ikonić, Milan; Barišić, Branimir; Blažević, Dalibor

IDENTIFICATION AND QUANTIFICATION OF RAW MATERIALS DURING DESIGNING OF CAST PRODUCING PROCESS // Metallurgy, vol.47, no.3 / Ilija Mamuzić (ur.).
Šibenik, Hrvatska: Hrvatsko Metalurško Društvo, 2008. str. 280-280 (predavanje, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

5.

Car, Zlatan; Barišić, Branimir; Ikonić, Milan

CNC TURNING CENTER GA BASED OPTIMIZATION // Metallurgy, vol.47, no.3 / Ilija Mamuzić (ur.).
Zagreb: Hrvatsko Metalurško Društvo, 2008. str. 280-280 (predavanje, međunarodna recenzija, sažetak, znanstveni)

6.

Barišić, Branimir; Car, Zlatan; Ikonić, Milan

Analysis of different modeling approach at determining of backward extrusion force on AlCu5PbBi material // 8th International Symposium of the Croatian Metallurgical Society / Metalurgija, 47(3) / Mamuzić, Ilija (ur.).
Zagreb: Hrvatsko metalurško društvo, 2008. str. 269-269 (predavanje, međunarodna recenzija, sažetak, znanstveni)

7.

Barišić, Branimir; Car, Zlatan; Kršulja, Marko; Ikonić, Milan

MATHEMATICAL MODELING, SIMULATION AND OPTIMIZATION OF BULK METAL FORMING PROCESS // Metallurgy, vol.47, no.3, / Ilija Mamuzić (ur.).
Zagreb: Hrvatsko Metalurško Društvo, 2008. str. 269-269 (predavanje, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

8.

Barišić, Branimir; Kuzman, Karl; Mikac, Tonči

Numerical-Stochastic Investigations Of Backward Extrusion Proces Force Based On Variations Of Different Materials And Process Parameters // Proceedings of 11th DAAAM International Workshop “ ; CA Systems and Technologies” ; / Duda, Jan ; Kurić, Ivan ; Katalinić, Branko (ur.).
Krakov: Cracow University of Technology, 2006. str. 8-12 (poster, sažetak, znanstveni)

9.

Car, Zlatan; Barišić, Branimir; Mikac, Tonči

Evolutionary Computation Based Multi-Objective Reconfiguration Of Shop-Floor Layout // CIM 2005 : Computer Intergrated Manufacturing and High Speed Machining / Cebalo, Roko ; Schulz, Herbert (ur.).
Zagreb: Hrvatska udruga proizvodnog strojarstva (HUPS), 2005. (poster, sažetak, znanstveni)

10.

Barišić, Branimir; Car, Zlatan; Mikac, Tonči

Evolutionary Computation Based Design and Reconfiguration of Shop-Floor Layout // Proceedings of the 4th DAAAM International Conference on Advanced Technologies for Developing Countries / Milan Kljajin, Branko Katalinic, Ivan Budic (ur.).
Beč: DAAAM International Vienna, 2005. str. 361-366 (poster, sažetak, znanstveni)

11.

Barišić, Branimir; Car, Zlatan; Cukor, Goran; Mikac, Tonči

Analytical, Numerical, and Experimental Modeling and Simulation of Backward Extrusion Force on AlMgSi 1 // ICIT 2005 : conference proceedings / Kuzman, Karl (ur.).
Velenje : Celje: TECOS-Celje, 2005. str. 341-346 (poster, sažetak, znanstveni)

12.

Barišić, Branimir; Cukor, Goran

Estimate of Consumed Energy at Backward Extrusion Process // Proceedings of the international conference on advances in materials and processing technologies -AMPT 2003 / Olabi, A. G. ; Hashmi, M. S. J. (ur.).
Dublin: Dublin City University, 2003. str. 1166-1169 (poster, sažetak, znanstveni)

13.

Jurković, Milan; Hriešik, Andrej; Barišić, Branimir

Deep Drawing Stress Modelling With Wall Thickness Reduction // CIM '99 - Computer Integrated Manufacturing and High Speed Machining / Cebalo, Roko ; Schulz, Herbert (ur.).
Zagreb: Hrvatska udruga proizvodnog strojarstva (HUPS), 1999. str. IV109-IV119 (poster, sažetak, znanstveni)

1.

Antabak, Anko; Brajčinović, Melita; Bradić, Lucija; Barišić, Branimir; Andabak, Matej; Halužan, Damir; Fuchs, Nino; Haramina, Tatjana; Ćurković, Selena; Luetić, Tomislav et al.

Physical properties of plaster casts // 7th Croatian Congress of Pediatric Surgery with International participation: Book of Abstracts
Osijek, 2015. (predavanje, domaća recenzija, neobjavljeni rad, znanstveni)

2.

Antabak, Anko; Brajčinović, Melita; Bradić, Lucija; Barišić, Branimir; Andabak, Matej; Halužan, Damir; Fuchs, Nino; Haramina, Tatjana; Ćurković, Selena; Luetić, Tomislav et al.

Exothermal reaction during plaster casting – analysis of three types of plaster casts // 7th Croatian Congress of Pediatric Surgery with International participation: Book of Abstracts
Osijek, 2015. (predavanje, domaća recenzija, neobjavljeni rad, znanstveni)

1.

Barišić, Branimir

Analiza procesa izvlačenja i istiskivanja primjenom stohstičkog i numeričkog modeliranja, 2002., magistarski rad, Tehnički fakultet, Rijeka

1.

Pašić, Milorad

Mjerenje brzine vrtnje obradnih strojeva, 2011., diplomski rad, diplomski, Tehnički fakultet, Rijeka

2.

Mofardin, Ivan

Analiza i implementacija naprednih sustava za grafičku simulaciju i programiranje CNC strojeva, 2011., diplomski rad, Tehnički Fakultet, Rijeka

3.

Omeragić, Marko Jasmin

Mjerenje osvjetljenosti pored strojeva/radnih mjesta, 2011., diplomski rad, Tehnički fakultet, Rijeka

4.

Božić, Denis

Mjerenje nosača alternatora na Trokoordinatnom mjernome stroju Gage max 755 navigator, 2011., diplomski rad, preddiplomski, Tehnički fakultet, Rijeka

5.

Maračić, Borna

Umjeravanje neautomatskih mjerila za vaganje, 2010., diplomski rad, diplomski, Tehnički fakultet, Rijeka

6.

Maksim, Ćirić

Modeliranje i simulacija proizvodnih sustava, 2010., diplomski rad, Tehnički fakultet, Rijeka

7.

Albert, Mjeda

Umjeravanje uređaja za istakanje tekućih goriva i plinova, 2010., diplomski rad, Tehnički fakultet, Rijeka

8.

Miljenko, Jurasić

Primjena Totalnih stanica za kontrolu kranskih staza, 2010., diplomski rad, Tehnički fakultet, Rijeka

9.

Emir, Vehabović

Mjerenje i kontrola tehničkih karakteristika prozora prema HRN EN 14351-1, 2010., diplomski rad, preddiplomski, Tehnički fakultet, Rijeka

10.

Poje, Dražen

Izrada okvira Combi Electra 100 R-50 tehnologijom oblikovanja deformiranjem, 2010., diplomski rad, diplomski, Tehnički fakultet, Rijeka

11.

Štimac, Sanjin

Mjerno rješenje određivanje sile i momenta automatiziranog procesa zatvaranja medicinskih bočica, 2010., diplomski rad, diplomski, Tehnički fakultet, Rijeka

12.

Lazanja, Kristijan

Mjerna kontrola i mjerenje na vagi za brojanje PCE - CBS 15, 2010., diplomski rad, diplomski, Tehnički fakultet, Rijeka

13.

Radošević, Marko

Umjeravanje moment ključeva pomoću Burster mjernog sustava, 2010., diplomski rad, diplomski, Tehnički fakultet, Rijeka

14.

Proleta, Danijel

Spektrometrijska mjerenja strukture ambalažnog lima, 2010., diplomski rad, preddiplomski, Tehnički fakultet, Rijeka

15.

Novković, Duško

Izrada podizne platforme uz podršku programskog paketa Solidworks korištenjem tehnologije obrade deformiranjem, 2010., diplomski rad, diplomski, Tehnički fakultet, Rijeka

16.

Lazanja, Matej

Mjerna kontrola točnosti CNC glodalice pomoću Ballbar QC10 sustava, 2010., diplomski rad, diplomski, Tehnički fakultet, Rijeka

17.

Zubović, Josip

Mjerenje buke različitih izvora u proizvodnji, 2009., diplomski rad, preddiplomski, Tehnički fakultet, Rijeka

18.

Ban, Damir

Mjerna kontrola broda-rafinerije primjenom totalne stanice, 2009., diplomski rad, preddiplomski, Tehnički fakultet, Rijeka

19.

Brentin, Arian

Utjecaj procesnih parametara kod savijanja u V matrici, 2009., diplomski rad, preddiplomski, Tehnički fakultet, Rijeka

20.

Svetličić, Branimir

Mjerna kontrola hrapavosti obrađenih površina, 2009., diplomski rad, preddiplomski, Tehnički fakultet, Rijeka

21.

Benčić, Marijan

Izrada trakastog transportera korištenjem tehnologije obrade deformiranjem, 2009., diplomski rad, Tehnički fakultet, Rijeka

22.

Deželjin, Dejan

Izrada prekretača paleta korištenjem tehnologije obrade deformiranjem, 2009., diplomski rad, Tehnički fakultet, Rijeka

23.

Šegan, Danijel

Računalom podržana mjerenja termoparom, 2009., diplomski rad, preddiplomski, Tehnički fakultet, Rijeka

24.

Stanić, Damir

Primjena grafometrijskih mjerenja na ambalažnom limu TH 415, 2009., diplomski rad, Tehnički fakultet, Rijeka

25.

Imširović, Davor

Mjerenje debljine stjenke pomoću ultrazvuka, 2009., diplomski rad, Tehnički fakultet, Rijeka

26.

Babić, Ivan

Mjerenje tvrdoće ambalažnih tankostjenih limova metodom HR 30 T, 2009., diplomski rad, Tehnički fakultet, Rijeka

27.

Ugrin, Andrej

Primjena totalnih stanica za mjernu provjeru off shore konstrukcije procesnog modula, 2008., diplomski rad, Tehnički fakultet, Rijeka

Pregled po CROSBI profilu: Branimir Barišić (CROSBI Profil: 6168, MBZ: 238642)

Knjige i poglavlja u knjigama

Autorske knjige

Uredničke knjige

Poglavlja u knjigama

Radovi u časopisima

Znanstveni i pregledni radovi

Stručni radovi

Drugi radovi u časopisima

Radovi u zbornicima skupova

Znanstveni radovi u zbornicima skupova

Sažeci sa skupova

Sažeci u zbornicima i časopisima

Druga sudjelovanja na skupovima

Ocjenski radovi

Magistarski radovi

Diplomski radovi (uključujući i diplomske radove starog programa)