Pregled po CROSBI profilu: Branimir Barišić (CROSBI Profil: 6168, MBZ: 238642)

101.

Stanić, Damir

Primjena grafometrijskih mjerenja na ambalažnom limu TH 415, 2009., diplomski rad, Tehnički fakultet, Rijeka

102.

Barišić, Branimir; Mamuzić, Ilija; Čep, Robert

Production Supported by Combination of Different Software in Sheet Metal Forming // Management of Technology – Step to Sustainable Production / Čosić, Predrag (ur.).
Zagreb, 2009. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

103.

Plančak, Miroslav; Vilotić, Dragiša; Barišić, Branimir; Movrin, Dejan; Pepelnjak, Tomaž

Die Stressing in Forward Cold Extrusion of Low Carbon Steel // Proceeding of 20th International Conference on Production Research / Ming, Li (ur.).
Shanghai: International Foundation for Production Research (IFPR), 2009. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

104.

Car, Zlatan; Ohkura, Kazuhiro; Barišić, Branimir

Application of Multi-Agent Technology and Heterarhical Architecture for Production Scheduling // Engineering review : znanstveni Časopis za nove tehnologije u strojarstvu, brodogradnji i elektrotehnici, 29 (2009), 1; 1-10 (podatak o recenziji nije dostupan, članak, znanstveni)

105.

Čep, Robert; Sadilek, Marek; Ocenašova, Lenka; Brychta, Josef; Hatala, Michal; Barišić, Branimir

Testing of DISAL D240 and D420 Ceramic Tool Materials with an Interrupted Cut Simulator // Proceedings of World Academy of Science, Engineering and Technology-ICME 2009:"International Conference on Mechanical Engineering" / Brojack, B. (ur.).
Tokyo: World Academy of Science, Engineering and Technology, 2009. str. 334-350 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

106.

Imširović, Davor

Mjerenje debljine stjenke pomoću ultrazvuka, 2009., diplomski rad, Tehnički fakultet, Rijeka

107.

Babić, Ivan

Mjerenje tvrdoće ambalažnih tankostjenih limova metodom HR 30 T, 2009., diplomski rad, Tehnički fakultet, Rijeka

108.

Vilotić, Dragiša; Plančak, Miroslav; Movrin, Dejan; Milutinović, Mladomir; Barišić, Branimir

Theoretical and FE analysis of Contact Stresses at Upsetting of Prismatic Specimen by Cylindrical Dies // Proceeding of 22. MicroCAD International Scientific Conference / Lehoczky Laszlo (ur.).
Miskolc: University of Miskolc, 2009. str. 65-71 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

109.

Car, Zlatan; Barišić, Branimir; Kršulja, Marko

Creating Virtual Models of Production Equipment For Simulation of a Manufacturing Process System // 10th International Scientific Conference, Automation in Production Planning and Manufacturing / Kuric, Ivan (ur.).
Žilina: University of Žilina, Faculty of Mechanical Engineering, 2009. str. 38-44 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

110.

Barišić, Branimir; Čep, Robert; Legutko, Stanislav

Modelling of a Complex Product-Shaker by means of Solidworks Software // Procedings of International Conference ERIN 2009 / P. Milčak ; Robert, Čep ; Jana, Novakova (ur.).
Ostrava: Technical University of Ostrava, Faculty of Mechanical Engineering, 2009. str. 1-9 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

111.

Ungureanu, Nicolae; Năsui, Vasile; Barišić, Branimir; Alexandrescu, Marius

Maintenance Efficiency Indicators of Systems // Scientific Bulletin. Serie C, Fascicle Mechanics, Tribology, Machine Manufacturing Technology, 23 (2009), 1; 357-361 (podatak o recenziji nije dostupan, izvorni znanstveni rad, znanstveni)

112.

Soković, Mirko; Barišić, Branimir; Sladić, Saša

Model of Quality Management of Hard Coatings on Ceramic Cutting Tools // Journal of Materials Processing Technology, 209 (2009), 8; 4207-4216 doi:10.1016/j.jmatprotec.2008.11.026 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

113.

Pepelnjak, Tomaž; Barišić, Branimir

Computer-assisted engineering determination of the formability limit for thin sheet metals by a modified Marciniak method // Journal of Strain Analysis for Engineering Design, 44 (2009), 6; 459-472 doi:10.1243/03093247JSA503 (međunarodna recenzija, članak, znanstveni)

doi journals.pepublishing.com

114.

Car, Zlatan; Barišić, Branimir; Ikonić, Milan

GA Based CNC Turning Center Exploitation Process Parameters Optimization // Metalurgija, 48 (2009), 1; 47-50 (podatak o recenziji nije dostupan, prethodno priopćenje, znanstveni)

public.carnet.hr

115.

Barišić, Branimir; Ungureanu, Nicolae; Car, Zlatan

Investigation of Forming Force at Backward Extrusion Process on Different Aluminum Materials // Scientific Bulletin. Serie C, Fascicle Mechanics, Tribology, Machine Manufacturing Technology, XXII (2008), 1; 21-27 (podatak o recenziji nije dostupan, članak, znanstveni)

www.nordtech.ubm.ro

116.

Barišić, Branimir; Ungureanu, Mioriţa; Car, Zlatan

A Numerical Approach to the Establishment of a Sheet Metal Forming Process Technology // Annals of University of Petroşani. Mechanical Engineering, 10 (2008), 1; 11-22 (podatak o recenziji nije dostupan, članak, znanstveni)

117.

Ugrin, Andrej

Primjena totalnih stanica za mjernu provjeru off shore konstrukcije procesnog modula, 2008., diplomski rad, Tehnički fakultet, Rijeka

118.

Štimac, Sanjin

Mjerenje buke uređajem PCE - 353, 2008., diplomski rad, preddiplomski, Tehnički fakultet, Rijeka

119.

Car, Zlatan; Barišić, Branimir; Kršulja, Marko

Machining center efficiency optimization based on evolutionary algorithm // Metallurgy, vol. 47, no.3 / Ilija Mamuzić (ur.).
Zagreb: Hrvatsko Metalurško Društvo (8, 2008), 2008. str. 280-280 (predavanje, međunarodna recenzija, sažetak, znanstveni)

hrcak.srce.hr; htpp public.carnet.hr

120.

Kršulja, Marko; Barišić, Branimir; Car, Zlatan

Optimization of 3-2-1 clamping method in milling operations // Metallurgy, vol. 47, no.3 / Mamuzić, Ilija (ur.).
Zagreb: Hrvatsko Metalurško Društvo, 2008. str. 270-270 (predavanje, međunarodna recenzija, sažetak, znanstveni)

hrcak.srce.hr; htpp public.carnet.hr

121.

Čep, Robert; Neslušan, Miroslav; Barišić, Branimir

Chip Formation Analysis During Hard Turning // Strojarstvo, 50 (2008), 6; 337-346 (međunarodna recenzija, članak, znanstveni)

122.

Jančić, Aleksandar

Mjerenje i analiza izmjera kućišta analizatora na koordinatnom mjernom stroju DEA Global Performanse, 2008., diplomski rad, Tehnički fakultet, Rijeka

123.

Mijić, Saša

Izrada ladice tehnologijom oblikovanja deformiranjem, 2008., diplomski rad, Tehnički fakultet, Rijeka

124.

Radošević, Marko

Mjerenje tvrdoće uređajem PCE – 2000, 2008., diplomski rad, preddiplomski, Tehnički fakultet, Rijeka

125.

Borna, Maračić

Mjerenje sile uređajem PCE - FM - 1000, 2008., diplomski rad, preddiplomski, Tehnički fakultet, Rijeka

126.

Barišić, Branimir; Kršulja, Marko

Measurement Technique and E-enviroment // EQIBELT( Education Quality Improvement by E-learning Technology), Workshop 3rd Policy workshop on pedagogical opportunities of E-learning, Workshop on earning support centres, Workshop on course in E-Learning enviroment / Bekić, Zoran ; Kučina Softić, Sandra (ur.).
Rijeka: University Of Zagreb, University Computing Centre Srce, 2008. str. 283-288 (pozvano predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

127.

Wierczorowski, Kazimier; Legutko, Stanislav; Barišić, Branimir

Spotters Wear Investigation // Proceeding of International Symposium ‘ ’ Progresive Methods in Manufacturing Technologies’ ’ / Stančekova, dana (ur.).
Žilina: Scientific-Tehnical Society University of Zilina, 2008. str. 118-122 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

128.

Kršulja, Marko; Barišić, Branimir; Kudlaček, Jan

Locating, Study of a Workholding Solution // Proceedings 2008, 6th International conference on Computer Aided Design and Manufacturing / Obsieger Boris (ur.).
Rijeka: Zigo, 2008. str. 31-32 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

129.

Kršulja, Marko; Barišić, Branimir; Car, Zlatan

Considerations and Use of the Genetic Algorithm in Optimization of Standard Fixture Components // The 19th International DAAAM SYMPOSIUM "Intelligent Manufacturing & Automation: Focus on Next Generation of Intelligent Systems and Solutions" / Katalinić, Branko (ur.).
Beč: DAAAM International Vienna, 2008. str. 731-732 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

130.

Damir Petretić

Mjerenje tvrdoće zupčanika uređajem Duramin 5, 2008., diplomski rad, Tehnički fakultet, Rijeka

131.

Sladić, Saša; Barišić, Branimir; Ungureanu, Nicolae

Adoption of active power H-bridge filter to vibration compensator for machining processes // Journal Manufacturing Engineering, 7 (2008), 3; 80-86 (podatak o recenziji nije dostupan, izvorni znanstveni rad, znanstveni)

132.

Barišić, Branimir; Kuric, Ivan; Legutko, Stanislaw

Lüders’ Bands And Hall-Patch Equation // Proceedings of the International Conference System-Equipment-Processes SOP 2008 / Jan Duda (ur.).
Krakov: Cracow University of Technology, 2008. str. 11-18 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

133.

Hrivnak, Radovan; Barišić, Branimir; Bečka, Jan

The Contactless Scanning of Objects-Virtual 3D Model Creating // Proceedings of the International Conference System-Equipment-Processes SOP 2008 / Jan Duda (ur.).
Krakov: Cracow University of Technology, 2008. str. 128-132 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

134.

Car, Zlatan; Barišić, Branimir; Sladic, Saša

GA Based Design and Production Planing // Proceedings of the 9th International Scientific Conference ” New Ways in Manufacturing Technologies” / Karol Vasilko (ur.).
Prešov: Technical University Kosiciach, 2008. str. 15-19 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

135.

Sladić, Saša; Car, Zlatan; Barišić, Branimir

Evolutionary Based Production Planning // Proceedings of 9th International Scientific Conference "Automation in Production Planning and Manufacturing" / Ivan Kuric (ur.).
Žilina: University of Zilina, 2008. str. 252-258 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

136.

Car, Zlatan; Barišić, Branimir; Novak; Jozef

Multy Objective Evolutionary Based Scheduling // Jourrnal Manufacturing Engineering, 7 (2008), 2; 47-51 (podatak o recenziji nije dostupan, izvorni znanstveni rad, znanstveni)

137.

Mijić, Saša; Barišić, Branimir; Kudlaček, Jan

Technology of Metal Drawer Manufacture by Implemention of CAD-CAM Connection // Engineering Review, 28 (2008), 1; 73-83 (podatak o recenziji nije dostupan, prethodno priopćenje, znanstveni)

www.riteh.hr

138.

Cep, Robert; Barišić, Branimir

Testing of Ceramic Cutting Tools with an Interrupted Cut Simulator // Engineering Review, 28 (2008), 1; 11-16 (podatak o recenziji nije dostupan, izvorni znanstveni rad, znanstveni)

www.riteh.hr

139.

Rucki, Miroslaw; Barišić, Branimir

Improvement of Air Gauges Metrological Properties through Constructional Changes // Proceedings of the 2nd International Scientific Conference New Technology Knowledge and Information / Novak Martin (ur.).
Ústí na Labi: University J. E. Purkyne-Usti nad Labem, 2008. str. 120-122 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

140.

Dražić, Ivan; Barišić, Branimir; Mujaković, Nermina

The implementation of iterative outer approximation method for elasto-plastic torsion problem // Technologické inžinierstvo / Technological engineering, 5 (2008), 1; 37-39 (podatak o recenziji nije dostupan, članak, znanstveni)

141.

Dražić, Ivan; Barišić, Branimir; Mujaković, Nermina

The implementation of iterative outer approximation method for elasto-plastic torsion problem // Progressive Methods in Manufacturing Technologies / Stančekova, Dana (ur.).
Žilina: Scientific-technical society by University of Zilina and Department of Maching and Automation, 2008. str. 11-15 (ostalo, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

142.

Barišić, Branimir; Pepelnjak, Tomaz; Math, Miljenko

Predicting of the Lueders bands in the processing of TH material in computer environment by means of stochastic modeling // Journal of Materials Processing Technology, 203 (2008), 1-3; 154-165 doi:10.1016/j.jmatprotec.2007.09.054 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada doi www.sciencedirect.com

143.

Ikonić, Milan; Barišić, Branimir; Blažević, Dalibor

IDENTIFICATION AND QUANTIFICATION OF RAW MATERIALS DURING DESIGNING OF CAST PRODUCING PROCESS // Metallurgy, vol.47, no.3 / Ilija Mamuzić (ur.).
Šibenik, Hrvatska: Hrvatsko Metalurško Društvo, 2008. str. 280-280 (predavanje, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

144.

Ungeruanu, Nicolae; Barišić, Branimir; Ungeruanu, Miorita

Consideration about Reliability of Gears // CA systems in production process planning, 9 (2008), 1; 77-80 (podatak o recenziji nije dostupan, članak, znanstveni)

145.

Car, Zlatan; Barišić, Branimir; Ikonić, Milan

CNC TURNING CENTER GA BASED OPTIMIZATION // Metallurgy, vol.47, no.3 / Ilija Mamuzić (ur.).
Zagreb: Hrvatsko Metalurško Društvo, 2008. str. 280-280 (predavanje, međunarodna recenzija, sažetak, znanstveni)

146.

Barišić, Branimir; Car, Zlatan; Ikonić, Milan

Analysis of different modeling approach at determining of backward extrusion force on AlCu5PbBi material // 8th International Symposium of the Croatian Metallurgical Society / Metalurgija, 47(3) / Mamuzić, Ilija (ur.).
Zagreb: Hrvatsko metalurško društvo, 2008. str. 269-269 (predavanje, međunarodna recenzija, sažetak, znanstveni)

147.

Barišić, Branimir; Car, Zlatan; Kršulja, Marko; Ikonić, Milan

MATHEMATICAL MODELING, SIMULATION AND OPTIMIZATION OF BULK METAL FORMING PROCESS // Metallurgy, vol.47, no.3, / Ilija Mamuzić (ur.).
Zagreb: Hrvatsko Metalurško Društvo, 2008. str. 269-269 (predavanje, međunarodna recenzija, sažetak, znanstveni)

public.carnet.hr

148.

Barišić, Branimir; Car, Zlatan; Ikonić, Milan

Analysis of different modeling approach at determining of backward extrusion force on AlCu5PbBi material // Metalurgija, 47 (2008), 4; 313-316 (međunarodna recenzija, članak, znanstveni)

hrcak.srce.hr

149.

Sladić, Saša; Barišić, Branimir; Soković, Mirko

Cost-Effective Power Converter for Thin Film Solar Cell Technology and Improved Power Quality // Journal of Materials Processing Technology, 201 (2008), 1-3; 786-792 doi:10.1016/j.jmatprotec.2007.11.161 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

150.

Barišić, Branimir; Rucki, Miroslaw; Car, Zlatan

Analysis of Digitizing and Traditional Measuring System at Surface Measurement of Lids // Key Engineering Materials, 381-382 (2008), 217-221 (podatak o recenziji nije dostupan, izvorni znanstveni rad, znanstveni)

151.

Grizelj, Branko; Plančak, Miroslav; Barišić, Branimir

Numerical Simulation of Combined Forward-Backward Extrusion // Key Engineering Materials, 367 (2008), 193-201 (podatak o recenziji nije dostupan, izvorni znanstveni rad, znanstveni)

152.

Barišić, Branimir; Grizelj, Branko; Plancak, Miroslav

Modeling Approach for Determination of Backward Extrusion Strain Energy on AlCu5PbBi // Key Engineering Materials, 367 (2008), 221-230 (podatak o recenziji nije dostupan, izvorni znanstveni rad, znanstveni)

153.

Rucki, Miroslaw; Barišić, Branimir; Szalay, Tibor

Analysis of Air Gage Inaccuracy Caused by Flow Instability // Measurement, 41 (2008), 6; 655-661 doi:10.1016/j.measurement.2007.10.001 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

154.

Bužan, Marko

Mjerenje i analiza izmjera kućišta vijčanog kompresora, 2007., diplomski rad, Tehnički fakultet, Rijeka

155.

Pauletić, Nenad

Izrada stalka upravljačke ploče tehnologijom oblikovanja deformiranjem, 2007., diplomski rad, Tehnički fakultet, Rijeka

156.

Gyenge, Csaba; Barišić, Branimir; Boca, Valentin

The Analyse of Contact Contour and the Relative Spiral Feed During Orbital Deformation // Proceedings of the 8th International Conference „ Modern Technologies in manufacturing” MTeM / Gyenge Csaba (ur.).
Cluj - Napoca: MTeM, 2007. str. 179-183 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

157.

Balc, Nicolae; Berce, Petru; Pacurar, Razvan; Barišić, Branimir

Using the CAD Compensation Factors to Improve the Accuracy of the SLS Parts // Proceedings of the 8th International Conference „ Modern Technologies in manufacturing” / Gyenge Csaba (ur.).
Cluj - Napoca: MTeM, 2007. str. 42-48 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

158.

Kršulja, Marko; Barišić, Branimir; Sladić, Saša

Optimization of Deformation for Milling Operation Using 3-2-1 Clamping Method // Proceedings of the 12th International DAAAM Workshop CA Systems and Technologies / Katalinic Branko ; Kuric Ivan (ur.).
Beč: UŽ-Faculty of Mechanical Engineering, 2007. str. 97-104 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

159.

Barišić, Branimir; Rucki, Miroslaw; Čalić, Bruno; Gomerčić, Mladen

The Measuring Comparison between Nocontact Digitizing System and Contact Coordinate Measuring System // Proceedings of the 9th International Conference on Management of Innovative Technologies / Junkar Mihael (ur.).
Piran: TAVO Slovene Society for Abrasive Water Jet Technology, 2007. str. 144-151 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

160.

Barišić, Branimir; Sladić, Saša; Soković, Mirko

Numerical Approach for DC 01 Sheet Metal Drawer Forming // Proceedings of the 10th Advances in Materials and Processing Technologies / Im. Y. T ; M. S. J. Hashmi (ur.).
Daejeon: by Korea Advanced Institute of Science and Technology-KAIST, 2007. str. 629-639 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

161.

Barišić, Branimir; Gyenge, Csaba; Balc, Nicolae

Production Philosophy for Modern Manufacturing on Trumph Trumatic Presses in Computer Environment // Proceedings of the 8th International Conference „ Modern Technologies in manufacturing” MTeM / Gyenge Csaba (ur.).
Cluj - Napoca: MTeM, 2007. str. 47-52 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

162.

Barišić, Branimir; Car, Zlatan; Kuzman, Karl

Evaluation of Different Analytic Models Accuracy at Backward Extrusion Force on AlCu5PbBi // Proceedings of the 12th International Conference On Tools ICT-2007 / Dudas Illes, Szabo Otto, Varga Gyula (ur.).
Miskolc: Department of Production Engineering-University of Miskolc, 2007. str. 287-293 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

163.

Rucki, Miroslaw; Barišić, Branimir

Improvement of Air Gauges Metrological Properties through Constructional Changes // Strojírenská technologie, 5 (2007), XII; 199-203 (podatak o recenziji nije dostupan, izvorni znanstveni rad, znanstveni)

164.

Dusevic, Hrvoje: Car, Zlatan: Barišić, Branimir

Machining Center Efficiency Optimization Using Artificial Intelligence // Annals of DAAAM for 2007 & Proceedings of the 18th International DAAAM Symposium / B. Katalinic (ur.).
Beč: DAAAM International Vienna, 2007. str. 132-133 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

165.

Ikonić, Milan; Barišić, Branimir; Blažević, Dalibor

Identifikacija i kvantifikacija materijala izrade tijekom projektiranja proizvodnje odljevaka // Metalurgija, 46 (2007), 3; 179-184 (međunarodna recenzija, pregledni rad, znanstveni)

pubwww.srce.hr

166.

Ikonić, Milan; Barišić, Branimir; Mikac, Tonči

Organizational Forms // Manufacturing Engineering, 6 (2007), 1; 59-61 (podatak o recenziji nije dostupan, članak, znanstveni)

167.

Grizelj, Branko; Barišić, Branimir; Math, Miljenko

FEM in Plate Bending // Key Engineering Materials, 344 (2007), -; 269-276 (podatak o recenziji nije dostupan, izvorni znanstveni rad, znanstveni)

www.scientific.net www.scientific.net

168.

Barišić, Branimir; Math, Miljenko; Grizelj, Branko

Analytic, Numerical, And Stochastic Comparison Of Forming Force Modeling At Deep Drawing And Backward Extrusion On The Same Al 99.5 F7 Parts // Key engineering materials, 344 (2007), 419-426 doi:10.4028/www.scientific.net/KEM.344.419 (međunarodna recenzija, članak, znanstveni)

doi www.scientific.net

169.

Juričić, Ivan

Mjerenje na optičko-digitalizacijskom mobilnom koordinatnom sustavu TRITOP, 2006., diplomski rad, Tehnički fakultet, Rijeka

170.

Komar, Sanjin

Mjerenje i analiza izmjera poklopca vijčanog kompresora, 2006., diplomski rad, Tehnički fakultet, Rijeka

171.

Komar, Sanjin; Barišić, Branimir; Matković, Romeo

Measurement and Analysis of Twin-Screw Supercharger Cover Measures // Engineering Review, 26 (2006), 49-62 (podatak o recenziji nije dostupan, članak, stručni)

172.

Juričić, Ivan; Barišić, Branimir; Hercigonja, Tomislav; Šćulac, Loris

Measurement of Jig For Inspection of Fan-Housing by Means of Optical 3D Coordinate Measuring System Tritop // Engineering Review, 26 (2006), 39-48 (podatak o recenziji nije dostupan, članak, stručni)

173.

Haračić, Senad; Barišić, Branimir; Car, Zlatan

Example of 3D Measurements and Analysis the Optical Eyepiece Holder // Development of Mechanical Engineering as a Tool for Enterprise Logistic Progress / Legutko, Stanislaw (ur.).
Poznań: Poznan University of Technology, 2006. str. 285-291

174.

Barišić, Branimir; Ikonić, Milan; Mikac, Tonči

Strain Energy Approach In Forming Processes Evaluation // Development of Mechanical Engineering as a Tool for the Enterprise Logistic Progress, CEEPUS / Legutko, Stanislaw (ur.).
Poznań: Poznan University of Technology, 2006. str. 177-186

175.

Ikonić, Milan; Car, Zlatan; Barišić, Branimir

Modern Organizational Concepts and Methods of Production Management // Proceedings of the 5th DAAAM International Conference on Advanced Technologies for Developing Countries : ATDC 2006 / Mikac, Tonči ; Katalinić, Branko (ur.).
Rijeka : Beč: University of Rijeka, Faculty of Engineering ; DAAAM, 2006. str. 291-297 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

176.

Barišić, Branimir; Kršulja, Marko; Car, Zlatan

Preliminary GA Based Optimization In Process Of Jig Design For Milling Processes // Proceedings of the 17th International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Mechatronics & Robotics" / Katalinic, B. (ur.).
Beč: DAAAM International Vienna, 2006. str. 029-030 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

177.

Crljenko, Domagoj; Barišić, Branimir; Car, Zlatan

Optimization Of Tool Motion On A 2-Dimensional Surface By Means Of The Genetic Algorithm // Proceedings of the 5th International DAAAM Conference Advanced Technologies for Developing Countries-ATDC 2006 / Mikac, T. ; Katalinić, B (ur.).
Rijeka: University of Rijeka-Faculty of Engineering, DAAAM International Vienna, 2006. str. 159-164 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

178.

Blažević, Dalibor; Mikac, Tonči; Barišić, Branimir

Manufacturing Execution System For Continuous Casting // Automation in production planning and manufacturing : proceedings of the 7th International scientific conference / Kuric, I. (ur.).
Žilina: University of Zilina, 2006. str. 17-22 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

179.

Maričić, Sven; Barišić, Branimir; Car, Zlatan

Stochastic Algorithm Application In Project Management For Limited Series Production // Proceedings of the 5th International DAAAM Conference "Advanced Technologies for Developing Countries" (ATDC 2006) / Mikac, T. ; Katalinić, Branko (ur.).
Rijeka: University of Rijeka, Faculty of Engineering, 2006. str. 281-286 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

180.

Ikonić, Milan; Mikac, Tonči; Barišić, Branimir

Organic Structures // 8th international scientific conference New Ways in Manufacturing Technologies 2006 : proceedings / Monka, Peter (ur.).
Prešov: Technical University Kosiciach-Preshov, 2006. str. 311-316 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

181.

Car, Zlatan; Barišić, Branimir; Math, Miljenko Dino

Modeling And Simulation Of Tinplate Container Lids Stamping Process // Trends in the Development of Machinery and Associated Technology / Ekinović, S. ; Vivancos, J. ; Yalcin, S. (ur.).
Barcelona : Lloret de Mar: Escola Tecnica Superior D Enginyeria Industrial de Barcelona ; Faculty of Mechanical Engineering in Zenica ; Bahcesehir University Istanbul, 2006. str. 173-176 (poster, cjeloviti rad (in extenso), znanstveni)

182.

Barišić, Branimir; Sladić, Saša; Gomerčić, Mladen

Digitizing Measurement And Shapes Inspection By Means Of Advanced Topometric Optical Sensors (ATOS) // 10th International Research/Expert Conference Trends in the Development of Machinery and Associated Technology (TMT 2006) : proceedings / Ekinović, S. ; Vivancos, J. ; Yalcin, S. (ur.).
Barcelona : Lloret de Mar: Escola Tecnica Superior D Enginyeria Industrial de Barcelona ; Faculty of Mechanical Engineering in Zenica ; Bahcesehir University Istanbul, 2006. str. 637-641 (poster, cjeloviti rad (in extenso), znanstveni)

183.

Barišić, Branimir; Kuzman, Karl; Mikac, Tonči

Numerical-Stochastic Investigations Of Backward Extrusion Proces Force Based On Variations Of Different Materials And Process Parameters // Proceedings of 11th DAAAM International Workshop “ ; CA Systems and Technologies” ; / Duda, Jan ; Kurić, Ivan ; Katalinić, Branko (ur.).
Krakov: Cracow University of Technology, 2006. str. 8-12 (poster, sažetak, znanstveni)

184.

Petohleb, Milenko

3-D Mjerenje i analiza izmjera kućišta turbo-puhala, 2006., diplomski rad, Tehnički fakultet, Rijeka

185.

Petohleb, Milenko; Barišić, Branimir; Bužan, Marko

3D-Measurement and Analysis of Measures for the Housing of a Turbo-Charger // Engineering Review, 25 (2005), 49-62 (podatak o recenziji nije dostupan, članak, stručni)

186.

Barišić, Branimir; Pepelnjak, Tomaž; Kuzman, Karl

Modeling and Simulation of Deep Drawing Tinplate Rings // Sheet Metal 2005 / Geiger, M. ; Duflou, J. ; Shirvani, Kals, B. ; Singh, U. P. (ur.).
Zürich: Trans Tech Publications, 2005. str. 329-336

187.

Barišić, Branimir; Pepelnjak, Tomaž; Kuzman, Karl

Numerical-Stochastic Modeling and Simulation of Deep Drawing Tinplate Rings // Advanced Materials Research, 6-8 (2005), 329-336 (međunarodna recenzija, članak, znanstveni)

188.

Car, Zlatan; Barišić, Branimir; Mikac, Tonči

Evolutionary Computation Based Multi-Objective Reconfiguration Of Shop-Floor Layout // CIM 2005 : Computer Intergrated Manufacturing and High Speed Machining / Cebalo, Roko ; Schulz, Herbert (ur.).
Zagreb: Hrvatska udruga proizvodnog strojarstva (HUPS), 2005. (poster, sažetak, znanstveni)

189.

Barišić, Branimir; Car, Zlatan; Mikac, Tonči

Evolutionary Computation Based Design and Reconfiguration of Shop-Floor Layout // Proceedings of the 4th DAAAM International Conference on Advanced Technologies for Developing Countries / Milan Kljajin, Branko Katalinic, Ivan Budic (ur.).
Beč: DAAAM International Vienna, 2005. str. 361-366 (poster, sažetak, znanstveni)

190.

Blažević, Dalibor; Barišić, Branimir; Ikonić, Milan

Optimization of Continuous Casting Workflow // Annals of DAAAM for 2005 & Proceedings of the 16th International DAAAM Symposium / Katalinić, Branko (ur.).
Beč: DAAAM International Vienna, 2005. str. 29-30 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

191.

Ikonić, Milan; Barišić, Branimir; Car, Zlatan

Strain Energy Approach In Stamping Process Design // Journal of Manufacturing Engineering, 4 (2005), 1; 79-81 (podatak o recenziji nije dostupan, članak, znanstveni)

192.

Barišić, Branimir; Spaić, Savo; Markoli, Boštjan

Effect Of Temperature-Rate Parameters On Mechanical And Metallographic Properties Of Tinplates T4 And T5 // Journal of Manufacturing Engineering, III (2005), 3; 23-26 (podatak o recenziji nije dostupan, članak, znanstveni)

193.

Barišić, Branimir; Car, Zlatan; Cukor, Goran; Mikac, Tonči

Analytical, Numerical, and Experimental Modeling and Simulation of Backward Extrusion Force on AlMgSi 1 // ICIT 2005 : conference proceedings / Kuzman, Karl (ur.).
Velenje : Celje: TECOS-Celje, 2005. str. 341-346 (poster, sažetak, znanstveni)

194.

Barišić, Branimir; Car, Zlatan; Mikac, Tonči, Ikonić, Milan

Computer Simulation of Hollow Tinplate Part Manufacturing // Proceedings of 6th International Scientific-Technical Conference Automation and CA Systems in Technology Planning and in Manufacturing / Novak-Marcincin, Josef (ur.).
Herl'any: TU Košice, 2005. str. 16-20 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

195.

Mikac, Tonči; Barišić, Branimir; Car, Zlatan

Numerical Simulation of Tinplate Rings Forming // Manufacturing Engineering, III (2005), 3; 39-42 (podatak o recenziji nije dostupan, članak, znanstveni)

196.

Cukor, Goran; Kuljanić, Elso; Barišić, Branimir

Optimisation of Machining Process Using Evolutionary Algorithms // AMST'05 - Advanced Manufacturing Systems and Technology / Kuljanić, Elso (ur.).
Udine: Springer, 2005. str. 135-142

197.

Barišić, Branimir; Cukor, Goran; Math, Miljenko

Estimate of consumed energy at backward extrusion process by means of modelling approach // Journal of materials processing technology, 153-154 (2004), 907-912 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada

198.

Maričić, Sven; Barišić, Branimir; Car, Zlatan

Stochastic and Genetic Algorithm Comparison for Production Scheduling in a Flexible Manufacturing System // Engineering Review, 23 (2003), 31-44 (podatak o recenziji nije dostupan, članak, znanstveni)

199.

Barišić, Branimir; Cukor, Goran; Sladić, Saša

Analysis and Simulation of Active Power Filter Including Fuzzy Logic Controller // Proceedings of the Asian Conference on Industrial Automation and Robotics / Afzulpukar, Nitin (ur.).
Bangkok: The Asian Institute of Technology, 2003. str. 183-188 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

200.

Barišić, Branimir; Cukor, Goran

Estimate of Consumed Energy at Backward Extrusion Process // Proceedings of the international conference on advances in materials and processing technologies -AMPT 2003 / Olabi, A. G. ; Hashmi, M. S. J. (ur.).
Dublin: Dublin City University, 2003. str. 1166-1169 (poster, sažetak, znanstveni)