Pregled po CROSBI profilu: Jelena Srnec Novak (CROSBI Profil: 36394, MBZ: 383463)
Pronađeno 34 radova
-
1.Experimental investigation of mechanical properties of the AISI 316L stainless steel: macro- and microscale // Conference Proceedings of the 23rd International EUSPEN Conference / Riemer, R. ; Nisbet, C. ; Phillips, D. (ur.).
Northampton, UK: EUSPEN, 2023. str. 67-70 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
2.Structured approach towards correlation of finite element models and nanoindentation measurement data // 1st General Meeting of the MecaNano COST Action CA21121
Madrid, Španjolska, 2023. sciencesconf.org:mecanano-gm23:455770, 1 (poster, sažetak, znanstveni) -
3.Strain-controlled fatigue loading of an additively manufactured AISI 316L steel: Cyclic plasticity model and strain–life curve with a comparison to the wrought material // Fatigue and Fracture of Engineering Materials and Structures, (2023), 2023; 1-17 doi:10.1111/ffe.13992 (međunarodna recenzija, članak, znanstveni)
-
4.Cyclic Plasticity and Low-Cycle Fatigue of an AISI 316L Stainless Steel Tested at Room Temperature // Fatigue and Fracture of Materials and Structures / Lesiuk, Grzegorz ; Duda, Szymon ; Correia, Jose A.F.O. ; De Jusus, Abilio M.P. (ur.).
Cham: Springer, 2022. str. 359-365 doi:10.1007/978-3-030-97822-8_42 -
5.On the factors influencing the elastoplastic cyclic response and low cycle fatigue failure of AISI 316L steel produced by laser-powder bed fusion // International Journal of Fatigue, 165 (2022), 1-12 doi:10.1016/j.ijfatigue.2022.107224 (međunarodna recenzija, članak, znanstveni)
-
6.Distortion after solubilization treatment of X12CrNiMoV12-3 beam-like samples: A novel FE modelling technique supported by experiments // Engineering Failure Analysis, 135 (2022), 106141, 15 doi:10.1016/j.engfailanal.2022.106141 (međunarodna recenzija, članak, znanstveni)
-
7.Cyclic Plasticity and Low Cycle Fatigue of an AISI 316L Stainless Steel: Experimental Evaluation of Material Parameters for Durability Design // Materials, 14 (2021), 13; 3588, 20 doi:10.3390/ma14133588 (međunarodna recenzija, članak, znanstveni)
-
8.Methodological correlation of finite element models to nanoindentation measurements on Si (100) // Proceedings of the 21th International Conference of the European Society for Precision Engineering and Nanotechnology / Leach, R. K. ; Nisbet, C. Philips, D. (ur.).
online: EUSPEN, 2021. str. 105-108 (plenarno, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
9.On the damage mechanism of a cold rolling roll: Finite element analysis and material characterization // AIP Conference Proceedings
Mallorca, Španjolska, 2020. str. 020013-1 doi:10.1063/5.0034964 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
10.Modeling the cyclic plasticity behavior of 42CrMo4 steel with an isotropic model calibrated on the whole shape of the evolution curve // 1st Virtual European Conference on Fracture - VECF1
Madeira, Portugal: Elsevier BV, 2020. str. 53-60 doi:10.1016/j.prostr.2020.10.007 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), ostalo) -
11.Lower bound estimate for buckling in axially graded cantilever rods // Engineering Research Express, 2 (2020), 3; 1-10 doi:10.1088/2631-8695/abb4f1 (međunarodna recenzija, članak, znanstveni)
-
12.Benchmarks for Accelerated Cyclic Plasticity Models with Finite Elements // Metals, 10 (2020), 6; 1-19 doi:10.3390/met10060781 (međunarodna recenzija, članak, znanstveni)
-
13.Failure analysis of cemented carbide roller for cold rolling: Material characterisation, numerical analysis, and material modelling // Engineering Failure Analysis, 116 (2020), 1-12 doi:10.1016/j.engfailanal.2020.104755 (međunarodna recenzija, članak, znanstveni)
-
14.Metal Plasticity and Fatigue at High Temperature // Metals, 10 (2020), 3; 1-3 doi:10.3390/met10030326 (međunarodna recenzija, uvodnik, znanstveni)
-
15.Numerical simulation of cyclic plasticity in mechanical components under low cycle fatigue loading: accelerated material models // Fatigue Design 2019: 8th edition of the International conference on fatigue design
Senlis, Francuska: Elsevier BV, 2019. str. 548-555 doi:10.1016/j.prostr.2019.12.059 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
16.Techniques to accelerate thermo-mechanical simulations in large-scale FE models with nonlinear plasticity and cyclic input // 2nd International Conference on Material Strength and Applied Mechanics (MSAM 2019)
Kijev, Ukrajina: IOP Publishing, 2019. str. 1-8 doi:10.1088/1757-899x/629/1/012008 (pozvano predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
17.FEM strategies for Large Scale Thermo-Mechanical Simulations with Material Non-linearity // World Symposium on Smart Materials and Applications (WSSMA 2019)
Harbin, Kina: IOP Publishing, 2019. str. 1-6 doi:10.1088/1757-899x/649/1/012022 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
18.Turbine Blade Distortion after Heat Treatment: Preliminary Experimental Investigation and FEM Analysis // 18th International Conference on Fracture and Damage Mechanics (FDM 2019)
Rodos, Grčka: Trans Tech Publications, Ltd., 2019. str. 98-103 doi:10.4028/www.scientific.net/kem.827.98 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), ostalo) -
19.Thermal distortion in copper moulds for continuous casting of steel: numerical study on creep and plasticity effect // Ironmaking & Steelmaking, 46 (2019), 1; 97-103 doi:10.1080/03019233.2017.1371425 (međunarodna recenzija, članak, znanstveni)
-
20.An Isotropic Model for Cyclic Plasticity Calibrated on the Whole Shape of Hardening/Softening Evolution Curve // Metals, 9 (2019), 9; 1-13 doi:10.3390/met9090950 (međunarodna recenzija, članak, ostalo)
-
21.Metallurgical and surface damage analysis in a copper mold after service // 34th Danubia Adria Symposium on Advances in Experimental Mechanics (DAS 2017)
Trst, Italija: Elsevier BV, 2018. str. 26709-26714 doi:10.1016/j.matpr.2018.08.140 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), ostalo) -
22.How Material Properties Affect the Thermal Distortion of a Mold for Continuous Casting of Steel // 17th International Conference on Fracture and Damage Mechanics (FDM 2018)
Bangkok, Tajland: Trans Tech Publications, Ltd., 2018. str. 429-434 doi:10.4028/www.scientific.net/kem.774.429 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
23.Material Modelling in Multi-Physics FEM Simulation // 3rd International Conference on Material Science and Engineering (ICMSE 2018)
Jeju City, Republika Koreja: Trans Tech Publications, Ltd., 2018. str. 41-45 doi:10.4028/www.scientific.net/kem.783.41 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
24.Acceleration techniques for the numerical simulation of the cyclic plasticity behaviour of mechanical components under thermal loads // 12th International Fatigue Congress (FATIGUE 2018) / Henaff, G (ur.).
Poitiers, Francuska: EDP Sciences, 2018. str. 1-8 doi:10.1051/matecconf/201816519010 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
25.Experimental characterization of a CuAg alloy for thermo-mechanical applications: non-linear plasticity models and low-cycle fatigue curves // 7th International Conference on Fatigue Design (Fatigue Design 2017)
Senlis, Francuska, 2018. str. 743-753 doi:10.1016/j.proeng.2018.02.070 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
