Pregled po CROSBI profilu: Tin Brlić (CROSBI Profil: 33439, MBZ: 355181)
Pronađeno 51 radova
-
1.Jandrlić, Ivan; Kozina, Franjo; Brlić, Tin; Mrkobrada, LorenaChanges in structure and properties of copper wire during the production and processing // Abstract Proceedings 62nd IFC Portorož 2022 / Jan-Blažič, Mrjam (ur.).
Ljubljana: Tisk Fleks d.o.o., 2022. 41, 13 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
2.Brlić, Tin; Lazić, Ladislav; Franz, Mladen; Jandrlić, Ivan; Rešković, StojaStress distribution at different deformation degrees in low carbon steel during cold deformation // Engineering review (Technical Faculty University of Rijeka), 42 (2022), 1; 103-108 doi:10.30765/er.1745 (međunarodna recenzija, članak, znanstveni)
-
3.Brlić, Tin; Rešković, Stoja; Jandrlić, Ivan; Aleksandrov Fabijanić, Tamara; Lazić, LadislavApplication of thermography in determining the proportionality limit // Conference proceedings of 11th International scientific-professional conference SBW 2021 „Engineering technologies in manufacturing of welded constructions and products, SBW 2021“ / Samardžić, Ivan ; Duspara, Miroslav ; Marić, Dejan (ur.).
Slavonski Brod: University of Slavonski Brod, Mechanical Engineering Faculty in Slavonski Brod, 2021. str. 15-18 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
4.Jandrlić, Ivan; Kozina, Franjo; Brlić, Tin; Vučenović, MilicaInfluence of cold reduction on the structure and hardness of cold drawn copper wire // 19th INTERNATIONAL FOUNDRYMEN CONFERENCE Humans - Valuable Resource for Foundry Industry Development / Dolić, Natalija ; Zovko Brodarac, Zdenka ; Brajčinović, Sandra (ur.).
Sisak: Metalurški fakultet Sveučilišta u Zagrebu, 2021. str. 314-324 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
5.Rešković, Stoja; Jandrlić, Ivan; Brlić, Tin; Hršak, Damir; Tarandek, PatrikChemical preparation of tubes before cold drawing // Proceedings book of 2nd International Conference „The Holistic Approach to Environment“ Virtual Conference 2021. / Štrkalj, Anita ; Glavaš, Zoran (ur.).
Sisak: Udruga za promicanje cjelovitog pristupa okolišu, 2021. str. 534-542 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
6.Skender, FilipAnizotropno ponašanje toplo valjane trake tijekom hladne deformacije, 2020., diplomski rad, Metalurški fakultet, Sisak
-
7.S. Rešković, I. Jandrlić, T. Brlić, F. VodopivecEffects of preferred grain orientation on the on Lüders bands appearance. // Effects of preferred grain orientation on the on Lüders bands appearance. / Mamuzić ilija (ur.).
Zagreb: Hrvatsko metalurško društvo, 2020. str. 440-440 (poster, međunarodna recenzija, sažetak, znanstveni) -
8.Brlić, TinPojava Lüdersovih linija kod niobijem mikrolegiranoga čelika, 2020., doktorska disertacija, Metalurški fakultet, Sisak
-
9.Grizelj, Branko; Rešković, Stoja; Marić, Dejan; Duspara, Miroslav; Brlić, Tin; Vuletić, Katica; Putnik, IvanSome influences on the mechanical properties of steel // Plin 2020 / Pero RAOS, glavni urednik Tomislav GALETA Dražan KOZAK Marija RAOS Josip STOJŠIĆ Igor SUTLOVIĆ Zlatko TONKOVIĆ (ur.).
Osijek: Sveučilište u Slavonskom Brodu, 2020. str. 224-235 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
10.Brlić, Tin; Rešković, Stoja; Jurkovic, Zoran; Janes, GordanMathematical modeling of influence parameters during formation and propagation of the Lüders bands // Facta Universitatis-Series Mechanical Engineering, 18 (2020), 4; 595-610 doi:10.22190/FUME200416041B (međunarodna recenzija, članak, znanstveni)
-
11.Rešković, Stoja; Brlić, Tin; Skender FilipApplication the Method Digital Image Correlation for Measurement of Small Deformations at the Beginning of Plastic Flow of Materials // New Technologies, Development and Application III / Karabegović, Isak (ur.).
Cham: Springer, 2020. str. 299-304 doi:10.1007/978-3-030-46817-0_34 -
12.Rešković, Stoja; Jandrlić, Ivan; Brlić, Tin; Vodopivec, FrancEffects of preferred grain orientation on the on lüders bands appearance // Metalurgija, 59 (2020), 1; 59-62 (međunarodna recenzija, članak, znanstveni)
-
13.Brlić, Tin; Rešković, Stoja; Jandrlić, IvanInfluence of Niobium Content on Strain Amount in Lüders Bands in Niobium Microalloyed Steel // Metals and materials international, 26 (2020), 2; 179-187 doi:10.1007/s12540-019-00336-w (međunarodna recenzija, članak, znanstveni)
-
14.Rešković, Stoja; Brlić, Tin; Jandrlić, Ivan; Vodopivec, FrancInfluence of Strip Cooling Rate on Lüders Bands Appearance During Subsequent Cold Deformation // New Technologies, Development and Application II / Karabegović, Isak (ur.).
Cham: Springer, 2020. str. 115-121 doi:10.1007/978-3-030-18072-0_12 -
15.Rešković, Stoja; Brlić, TinUpravljanje kvalitetom / prof.dr.sc. Zoran Glavaš, prof.dr.sc. Biserka Runje (ur.).
Sisak: Metalurški fakultet Sveučilišta u Zagrebu, 2019 -
16.Slokar Benić, Ljerka; Rešković, Stoja; Marciuš, Marijan; Brlić, TinChange of microstructure of Nb microalloyed steel at start of the plastic flow during the cold deformation // International Journal of Mechanical and Production Engineering, 7 (2019), 12; 120-122 (međunarodna recenzija, članak, znanstveni)
-
17.Matvija, Miloš; Rešković, Stoja; Brlić, TinDistribution of dislocations on the Lüders band front during cold deformation in steel // Proceedings from the 14th multinational congress on microscopy / Grbović-Novaković Jasmina, Nestorović Nataša, Rajnović Dragan (ur.).
Beograd: Institute for Biological Research “Siniša Stanković”, 2019. str. 343-345 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
18.Rešković, Stoja; Balenović, Marijan; Jandrlić, Ivan; Brlić, TinThe influence of niobium precipitates in the cold drawing pipe // Conference proceedings METAL 2019 / Different Authors (ur.).
Ostrava: 2019 Tanger, Ltd, 2019. str. 102-102 (poster, međunarodna recenzija, prošireni sažetak, znanstveni) -
19.Jandrlić, Ivan; Rešković, Stoja; Tarandek, Patrik; Slokar Benić, Ljerka; Brlić, TinStudy on strengthening during cold drawing of steel tubes // Proceedings of 9th International Conference Mechanical Technologies and Structural Materials 2019 / Jozić, Sonja ; Lela, Branimir (ur.).
Split: Hrvatsko društvo za strojarske tehnologije, 2019. str. 83-88 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
20.Slokar Benić, Ljerka; Rešković, Stoja; Marciuš, Marijan; Brlić, TinChange of microstructure of Nb microalloyed steel at start of the plastic flow during the cold deformation // Proceedings of The IIER International Conference / Suresh, Parimi (ur.).
Bhubaneswar: IRAJ Research Forum, 2019. str. 17-19 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
21.Rešković, Stoja; Grizelj, Branko; Brlić, Tin; Balenović, MarijanThe application of a factorial experiment with repeated measurements in the investigation of parameters influencing the properties of niobium microalloyed cold drawn welded steel tubes // Transactions of FAMENA, 43 (2019), 4; 17-26 (međunarodna recenzija, članak, znanstveni)
-
22.Jandrlić, Ivan; Rešković, Stoja; Čurćija, Dušan; Lazić, Ladislav; Brlić, TinModeling of stress distribution on the basis of the measured values of strain and temperature changes // AIMS Materials Science, 6 (2019), 4; 601-609 doi:10.3934/matersci.2019.4.601 (međunarodna recenzija, članak, znanstveni)
-
23.Tarandek, Patrik; Rešković, Stoja; Perković Obućina, Tihana; Kostić, Saša; Brlić, TinCold drawing of steel tubes // 18th International Foundrymen Conference - Coexistence of Material Science and Sustainable Technology in Economic Growth - Students' section / Ljerka Slokar Benić, Zdenka Zovko Brodarac (ur.).
Sisak, 2019. str. 11-11 (predavanje, sažetak, znanstveni) -
24.Skender, Filip; Brlić, Tin; Rešković, StojaInfluence of stretching rate on the beginning of cold deformation in niobium microalloyed steel // 18th International Foundrymen Conference - Coexistence of Material Science and Sustainable Technology in Economic Growth - Students' section / Slokar Benić, Ljerka ; Zovko Brodarac, Zdenka (ur.).
Sisak, 2019. str. 10-10 (predavanje, sažetak, znanstveni) -
25.Jandrlić, Ivan; Rešković, Stoja; Lazić, Ladislav; Brlić, Tin; Ćurčija, DušanAppropriate mathematical model for stress calculation based on the measured values of deformation and temperature changes // 18th International foundrymen conference, Coexistence of material science and sustainable technology in economic growth / Dolić, Natalija ; Zovko Brodarac, Zdenka ; Begić Hadžipašić, Anita (ur.).
Sisak: Metalurški fakultet Sveučilišta u Zagrebu, 2019. str. 145-152 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
26.Brlić, Tin; Debruyne, Dimitri; Lava, Pascal; Rešković, Stoja; Jandrlić, IvanIdentification of Lüders bands using digital image correlation // The Holistic Approach to Environment, 9 (2019), 1; 8-11 doi:.org/10.33765/thate.9.1.2 (međunarodna recenzija, članak, znanstveni)
-
27.Komosar, KarloUtjecaj mikrolegirajućeg elementa niobija na raspodjelu naprezanja kod hladne deformacije, 2018., diplomski rad, preddiplomski, Metalurški fakultet, Sisak
-
28.Skender, FilipUtjecaj mikrostrukture i brzine deformacije na početak hladne deformacije čelika mikrolegiranog niobijem, 2018., diplomski rad, preddiplomski, Metalurški fakultet, Sisak
-
29.Rešković, Stoja; Jandrlić, Ivan; Brlić, TinThe influence of niobium content and initial microstructure of steel on the occurrence of Lüders band at the start of the plastic flow during cold deformation // IOP conference series. Materials science and engineering, 461 (2018), 1; 1-6 doi:10.1088/1757-899X/461/1/012070 (međunarodna recenzija, članak, znanstveni)
-
30.Brlić, Tin; Rešković, Stoja; Jandrlić, Ivan; Skender, FilipInfluence of strain rate on stress changes during Lüders bands formation and propagation // IOP conference series. Materials science and engineering, 461 (2018), 1; 1-6 doi:10.1088/1757-899X/461/1/012007 (međunarodna recenzija, članak, znanstveni)
-
31.Jandrlić, Ivan; Rešković, Stoja; Brlić, Tin; Furlan, VjeranEffect of deformation rate on low carbon steels mechanical properties // IOP conference series. Materials science and engineering, 461 (2018), 1; 1-6 doi:10.1088/1757-899X/461/1/012030 (međunarodna recenzija, članak, znanstveni)
-
32.Aleksandrov Fabijanić, Tamara; Brlić, Tin; Jandrlić, Ivan; Franz, Mladen; Alar, Željko; Rešković, StojaThe influence of Nb content on the mechanical properties of micro alloyed low carbon steels // 19th World Congress on Materials Science and Engineering – conference proceedings / Journal of Material Sciences & Engineering, 7
Brisel: Hilaris Publishing, 2018. str. 151-152 doi:10.4172/2169-0022-C8-113 (predavanje, međunarodna recenzija, sažetak, znanstveni) -
33.Jandrlić, Ivan; Rešković, Stoja; Brlić, Tin; Hršak, DamirThe Possibility of Using Adhesive for Bonding Steel with Ceramics // Acta mechanica Slovaca, 22 (2018), 2; 30-33 doi:10.21496/ams.2018.014 (međunarodna recenzija, članak, stručni)
-
34.Brlić, Tin; Rešković, Stoja; Vodopivec, Franc; Jandrlić, IvanLüders bands at the beginning of the plastic flow of materials // Metalurgija, 57 (2018), 4; 357-359 (međunarodna recenzija, pregledni rad, znanstveni)
-
35.Aleksandrov Fabijanić, Tamara; Brlić, Tin; Jandrlić, Ivan; Franz, Mladen; Alar, Željko; Rešković, StojaThe influence of Nb content on the mechanical properties of micro alloyed low carbon steels // Proceedings of 19th World Congress on Materials Science and Engineering
London : Delhi: Conference Series Ilc LTD, 2018. str. 151-152 (predavanje, međunarodna recenzija, prošireni sažetak, znanstveni) -
36.Jandrlić, Ivan; Rešković, Stoja; Brlić, TinDistribution of stress in deformation zone of niobium microalloyed steel // Metals and materials international, 24 (2018), 4; 746-751 doi:10.1007/s12540-018-0099-2 (međunarodna recenzija, članak, znanstveni)
-
37.Jandrlić, Ivan; Rešković, Stoja; Lazić, Ladislav; Alar, Željko; Udiljak, Toma; Brlić, TinPossibility of using thermography and digital image correlation for determination of stress and strain distribution in deformation zone // Proceeding MTECH 2017 / Kovačić, Saša ; Kurtela, Marin ; Markučić, Damir ; Sakoman, Matija (ur.).
Zagreb: Croatian Socitey for Materials and Tribology, 2017. str. 35-43 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
38.Rešković, Stoja; Brlić, Tin; Jakovljević, Suzana; Jandrlić IvanSurface contamination of alumina ceramics by carbon // Engineering review (Technical Faculty University of Rijeka), 37 (2017), 3; 335-340 (međunarodna recenzija, članak, znanstveni)
-
39.Lazić, Ladislav; Rešković, Stoja; Jandrlić, Ivan; Brlić, TinDetermination of the emissivity of coatings for preparation of samples in thermographic testings // Proceedings of the 25th International Conference on Ecological Truth / Radoje V. Pantovic, Zoran S. Markovic (ur.).
Bor: University of Belgrade - Technical Faculty in Bor, 2017. str. 100-107 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
40.Rešković, Stoja; Brlić, Tin; Vodopivec, Franc; Novosel-Radović, Vjera; Franz, MladenInfluence of Finish Rolling Temperature on the Mechanical Properties of Niobium Microalloyed Tubes // Proceedings of 16th International Scientific Conference on Production Engineering - CIM 2017 / E. Abele, T. Udiljak, D. Ciglar (ur.).
Zagreb: Hrvatska udruga proizvodnog strojarstva, 2017. str. 213-216 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
41.Brlić, Tin; Rešković, Stoja; Jandrlić, IvanStudy of Inhomogeneous Plastic Deformation Using Thermography // Proceedings of 16th International Scientific Conference on Production Engineering - CIM 2017 / E. Abele, T. Udiljak, D. Ciglar (ur.).
Zagreb: Hrvatska udruga proizvodnog strojarstva, 2017. str. 65-68 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
42.Jandrlić, Ivan; Rešković, Stoja; Brlić, Tin; Lazić, Ladislav; Aleksandrov Fabijanić, TamaraInvestigation of deformation by digital image correlation // Proceedings of 16th International Foundrymen Conference, Global Foundry Industry - Perspectives for the Future / Zovko Brodarac, Zdenka ; Dolić, Natalija ; Begić Hadžipašić, Anita (ur.).
Sisak: Metalurški fakultet Sveučilišta u Zagrebu, 2017. str. 115-121 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
43.Rešković, Stoja; Jandrlić, Ivan; Brlić, TinStress distribution in deformation zone // Proceedings of "48th International October Conference on Mining and Metallurgy" / Štrbac, Nada ; Živković, Dragana (ur.).
Bor: Technical Faculty in Bor, 2016. str. 339-342 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
44.Brlić, Tin; Rešković, Stoja; Jakovljević, Suzana; Jandrlić, IvanDistribution control of trace elements in aluminium oxide ceramics by scanning electron microscope equipped with EDS detector // Proceedings of international conference MATRIB 2016 / Žmak, Irena ; Aleksandrov Fabijanić, Tamara ; Ćorić, Danko (ur.).
Zagreb: Croatian Society for Materials and Tribology, 2016. str. 52-58 (poster, međunarodna recenzija, cjeloviti rad (in extenso), stručni) -
45.Jandrlić, Ivan; Brlić, Tin; Rešković, StojaApplication of thermography in the production and processing of metallic materials // Proceedings Book of 15th International Foundrymen Conference / Dolić, Natalija ; Zovko Brodarac, Zdenka (ur.).
Sisak: Metalurški fakultet Sveučilišta u Zagrebu, 2016. str. 99-108 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), ostalo) -
46.Brlić, TinKarakterizacija površinski aktivnih tvari u frakcijama atmosferskih lebdećih čestica elektrokemijskom metodom, 2014., diplomski rad, diplomski, Fakultet kemijskog inženjerstva i tehnologije, Zagreb
-
47.Brlić, Tin; Borić, Marina; Kaselj, Ivona (mentor: Vesna Tomašić)Fotokatalitička razgradnja pesticida, 2013. (domaća recenzija, rektorova nagrada).
-
48.Rešković, Stoja; Brlić, Tin; Jakovljević, Suzana; Sladojević, MilanInvestigation of causes of product surface contamination in production of alumina ceramics // 46th International Symposium Fuels & Lubricants Scientific
Zagreb: Croatian Society for Fuels and Lubricants, 2013. str. 123-123 (poster, međunarodna recenzija, sažetak, znanstveni) -
49.Brlić, TinIstraživanje uzroka pojave kontaminacija na aluminij oksidnoj keramici tijekom procesa proizvodnje, 2013., diplomski rad, diplomski, Metalurški fakultet, Sisak
-
50.Brlić, Tin; Rešković, Stoja; Pinotić, DamirUltrazvučna kontrola izmjenjivača topline // PROCEEDINGS BOOK of 11th INTERNATIONAL FOUNDRYMEN CONFERENCE Foundry Industry – Significance and Future Challenges / Unkić, Faruk (ur.).
Sisak: Metalurški fakultet Sveučilišta u Zagrebu, 2011. str. 205-215 (poster, cjeloviti rad (in extenso), stručni) -
51.Brlić, TinUltrazvučna kontrola izmjenjivača topline, 2010., diplomski rad, preddiplomski, Metalurški fakultet, Sisak
