Pregled po CROSBI profilu: Amalija Horvatić Novak (CROSBI Profil: 33229, MBZ: 348172)
Pronađeno 73 radova
-
51.Nađ, Nada; Mihaljević, Morana; Keran, Zdenka; Horvatić Novak, AmalijaThe accuracy of ultrasonic thickness measurement of distorted grain structure metal samples // Total Quality Management Advanced and Intelligent Approaches Proceedings / Majstorović, V. (ur.).
Beograd: Mechanical Engineering Faculty, Beograd, 2017. str. 133-137 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
52.Orošnjak, Marko; Karanović, Velibor; Horvatić Novak, Amalija; Peković, Tamara, Jocanović, MitarMaintenance of a hydraulic system through oil monitoring and contamination control // Computer integrated manufacturing and high speed machining - CIM 2017 / Abele, E. ; Udiljak, T. ; Ciglar, D. (ur.).
Zagreb: Denona, 2017. str. 195-202 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
53.Horvatić Novak, Amalija; Runje, Biserka; Novak, Igor; Groš, Josip; Medić, SrđanUse of different fitting methods in computed tomography dimensional measurements // Computer integrated manufacturing and high speed machining - CIM 2017 / Abele, E. ; Udiljak, T. ; Ciglar, D. (ur.).
Zagreb: Denona, 2017. str. 111-114 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
54.Orošnjak, M.; Peković, T.; Jocanović, M.; Karanović, V.; Horvatić Novak, A.Using contamination control in condition based maintenance of a hydraulic system // 42nd Maintenance Forum on Maintenance and Asset Management : Conference proceedings / Branko Vasić (ur.).
Beograd, 2017. str. 102-111 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
55.Horvatić Novak, Amalija; Runje, BiserkaInfluence of object surface roughness in CT dimensional measurements // iCT 2017
Leuven: KU Leuven, 2017. str. 159-160 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
56.Runje, Biserka; Horvatić Novak, Amalija; Alar, Vesna; Medić, Srđan; Bošnjaković, AlenExamples of measurement uncertainty evaluations in accordance with the revised GUM // Journal of Physics: Conference Series Metrology across the Sciences: Wishful Thinking?
Berkeley (CA), 2016. str. 128-142 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
57.Runje, Biserka; Horvatić Novak, AmalijaCalibration and Measurement Capabilities (CMCs) of NMIs in light of the new revised GUM // Laboratory competence 2016 / Lovorka Grgec Bermanec (ur.).
Zagreb: CROLAB - Hrvatski laboratoriji, 2016. (predavanje, međunarodna recenzija, sažetak, znanstveni) -
58.Horvatić Novak, Amalija; Runje, Biserka; Butković, DanijelINFLUENCE OF GEOMETRICAL MAGNIFICATION ON COMPUTED TOMOGRAPHY DIMENSIONAL MEASUREMENTS // 27th DAAAM International Symposium Intelligent Manufacturing & Automation: Focus on Sustainability
Mostar, 2016. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
59.Horvatić Novak, Amalija; Runje, BiserkaDimensional measurement with usage of computed tomography method // Conference proceedings: Mechanical technologies and structural materials / Jozić, Sonja ; Lela, Branimir (ur.).
Split: Croatian society for mechanical technologies, 2016. str. 51-54 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
60.Runje, Biserka; Stepanić, Josip; Mihaljević, Morana; Horvatić, Amalija; Kondić, VeljkoSimulation modelling of a company providing two qualitatively different services to market // International journal of simulation modelling, 15 (2016), 3; 473-484 (međunarodna recenzija, članak, znanstveni)
-
61.Alar, Vesna; Žmak, Irena; Runje, Biserka; Horvatić, AmalijaDevelopment of Models for Prediction of Corrosion and Pitting Potential on AISI 304 Stainless Steel in Different Environmental Conditions // International Journal of Electrochemical Science, 11 (2016), 7674-7689 doi:10.20964/2016.09.26 (međunarodna recenzija, članak, znanstveni)
-
62.Horvatić, AmalijaTraceability assurance in computed tomography dimensional measurements // Second Annual PhD Workshop, PhD study of Mechanical Engineering, Naval Architecture, Aeronautical Engineering and Metallurgical Engineerin, Book of Abstracts / Parunov, Joško ; Zovko Brodarac, Zdenka ; Bauer, Branko ; Cajner, Franjo ; Duić, Neven ; Đukić, Goran ; Jokić, Andrej ; Lulić, Zoran ; Majetić, Dubravko ; Matijević, Božidar ; Runje, Biserka ; Sorić, Jurica ; Terze, Zdravko (ur.).
Zagreb, 2016. (predavanje, domaća recenzija, sažetak, ostalo) -
63.Runje, Biserka; Horvatić, Amalija; Mudronja, VedranMethods for risk assessment // Conference Proceedings - 16th Croatian Conference on Quality and 7th Scientific Conference of the Croatian Society for Quality, International Professional and Scientific Conference / Šimunec, Krunoslav (ur.).
Poreč: Hrvatsko društvo za kvalitetu, 2016. str. 356-365 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), stručni) -
64.Horvatić, Amalija; Runje, Biserka; Novak, IgorComputed tomography: Influence of part position on measurement results // Dimensional X-ray Computed Tomography Conference 2016
Teddington: National Physical Laboratory, 2016. str. 11-11 (poster, međunarodna recenzija, sažetak, znanstveni) -
65.Morana, Mihaljević; Zdenka Keran; Amalija, HorvatićTHE INFLUENCE OF TEST PIECE SURFACE ROUGHNESS ON ULTRASONIC THICKNESS MEASUREMENTS // 22. Međunarodno savjetovanje o zaštiti materijala i industrijskom finišu "KORMAT 2016" / Stojanović, I ; Alar, V ; Šimunović, V (ur.).
Zagreb: Hrvatsko društvo za zaštitu materijala (HDZaMa), 2016. str. 29-34 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
66.Runje, Biserka; Horvatić, Amalija; Stepanić, JosipComputed tomography in dimensional metrology and material analysis // 22. International conference of materials protection and industrial finish / Stojanović, Ivan ; Alar, Vesna ; Šimunović, Vinko (ur.).
Zagreb: Hrvatsko društvo za zaštitu materijala (HDZaMa), 2016. str. 1-8 (pozvano predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
67.Alar, Vesna; Runje, Biserka; Ivušić, Franjo; Horvatić, Amalija; Mihaljević, MoranaCorrosion behaviour of stainless steel in contact with wine and beer // Metalurgija, 55 (2016), 3; 437-440 (podatak o recenziji nije dostupan, prethodno priopćenje, znanstveni)
-
68.Medić, Srđan; Groš, Josip; Horvatić, Amalija; Kondić, Živko; Maglić, LeonMeasurement of casting parameters in ZnAlCu3 molds created by additive technology // Metalurgija, 55 (2016), 4; 705-708 (međunarodna recenzija, članak, znanstveni)
-
69.Runje, Biserka; Horvatić, Amalija; Stepanić, Josip; Mihaljević, MoranaPredložena revizija Vodiča za iskazivanje mjerne nesigurnosti // Laboratory Competence 2015
Zadar, 2015. (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
70.Runje, Biserka; Krstić Vukelja, Elizabeta; Horvatić, AmalijaComparison of different simulations methods in case of service-providing companies // Interdisciplinary description of complex systems, 13 (2015), 3; 472-478 doi:10.7906/indecs.13.3.11 (međunarodna recenzija, članak, znanstveni)
-
71.Horvatić, Amalija; Runje, BiserkaCALIBRATION METHODS OF THE DIMENSIONAL METROLOGY X- RAY CT SYSTEM // 15. International scientific conference on production engineering COMPUTER INTEGRATED MANUFACTURING AND HIGH SPEED MACHINING CIM 2015
Vodice, 2015. str. 123-126 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
72.Horvatić, Amalija; Bošnjaković, Alen; Runje, BiserkaOSIGURAVANJE SLJEDIVOSTI KOD PRIMJENE RAČUNALNE TOMOGRAFIJE U DIMENZIONALNOM MJERITELJSTVU // 15th Croatian Conference on Quality and 6th scientific meeting of the Croatian Society for Quality
Primošten, 2015. str. 79-82 (poster, međunarodna recenzija, cjeloviti rad (in extenso), stručni) -
73.Runje, Biserka; Baršić, Gorana; Katić, Marko; Šimunović, Vedran; Horvatić, AmalijaStatistics in Metrology // 10th INTERNATIONAL CONFERENCE LABORATORY COMPETENCE 2014
Šibenik, 2014. (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
