Pregled po CROSBI profilu: Antun Stoić (CROSBI Profil: 27297, MBZ: 190286)

201.

Raos, Pero; Stoić, Antun; Kopač, Janez

Manufacturing of Customized Medical Implants // Proceedings of the 8th International Research/Expert Conference Trends in the Development of Machinery and Associated Technology (TMT 2004) / Ekinović, Sabahudin ; Brdarević, S. ; Vivancos, J. ; Puerta, F. (ur.).
Zenica: Faculty of Mechanical Engineering, 2004. str. 99-102 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

202.

Raos, Pero; Stoić, Antun

Computer Aided Implant Machining // 2^nd Croatian Congress on Telemedicine with International Participation. Book of Abstracts / Klapan, Ivica ; Kovač, Mario (ur.).
Zagreb: Croatian Telemedicine Society of the Croatian Medical Association, 2004. str. 78-79 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

203.

Stiković, Saša

Analiza obradivosti navarenog sloja materijala na čeliku za poboljšanje, 2003., diplomski rad, Strojarski fakultet u Slavonskom Brodu, Slavonski Brod

204.

Stoić, Antun; Raos, Pero

Tool condition monitoring system // Proceedings of 12th International Scientific Conference Achievements in Mechanical and Materials Engineering 2003 / Dobrzanski, Leszek A. (ur.).
Gliwice : Zakopane: Organising Committee of the International Scientific Conferences-Institute of Engineering Materials and Biomaterials of the Silesian University of Technology in Gliwice, 2003. str. 843-846 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

205.

Cukor, Goran; Stoić, Antun

Solving the Face Milling Optimisation Problem by Evolutionary Algorithm // 7th International Research/Expert Conference "Trends in the Development of Machinery and Associated Technology" TMT 2003 / Joan Vivancos, Calvet ; Ferran Puerta, Sales ; Sabahudin, Ekinović ; Safet, Brdarević (ur.).
Barcelona: Faculty of ME in Zenica, Escola Technica Superior D'Enginyeria Industrial de Barcelona, Mechanic, Universitet Politecnica de Catalunya, 2003. str. 29-32 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

206.

Raos, Pero; Stoić, Antun; Kopač, Janez

Identification of cutting conditions in turning by noise recording // Tehnički vjesnik Znanstveno stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 10 (2003), 2; 11-16 (međunarodna recenzija, članak, znanstveni)

207.

Stoić, Antun; Cukor, Goran

Optimisation Method for Laser Beam Cutting // DAAAM International Scientific Book 2003 / Katalinić, Branko (ur.).
Beč: DAAAM International Vienna, 2003. str. 569-582 ; uk. 646

208.

Stoić, Antun; Kopač, Janez; Cukor, Goran

Tool Condition Monitoring and Control // CIM 2003: Computer Integrated Manufacturing and High Speed Machining / 9th International Scientific Conference on Production Engineering / Cebalo, Roko ; Schulz, Herbert (ur.).
Zagreb: Hrvatska udruga proizvodnog strojarstva (HUPS), 2003. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

209.

Cebalo, Roko; Bajić, Dražen; Stoić, Antun

OPTIMIZATION OF AN AXIAL HYDROSTATIC BEARING WORK CONDITION // CIM 2003 Computer Integrated Manufacturing and High Speed Machining / Cebalo R & Schulz H. (ur.).
Zagreb: Hrvatska udruga proizvodnog strojarstva (HUPS), 2003. str. II001-II011 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

210.

Cebalo, Roko; Stoić, Antun; Jurjević, Mate

Benefits and limitations of the coolant application for machining // CIM 2003 Computer Integrated Manufacturing and High Speed Machining / Cebalo, Roko ; Schulz, Herbert (ur.).
Zagreb: Hrvatska udruga proizvodnog strojarstva (HUPS), 2003. (ostalo, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

211.

Cebalo, Roko; Stoić, Antun; Bajić, Dražen

Optimization of ground surface roughness by tool dresing with the pressing roller // CIM 2003 Computer Integrated Manufacturing and High Speed Machining / Cebalo R. &Schulz H. (ur.).
Zagreb: Hrvatska udruga proizvodnog strojarstva (HUPS), 2003. str. I 011- I 019 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

212.

Cebalo, Roko; Stoić, Antun

Optimisation of the roughness of the ground surface by diamond roller dressing // Tehnički vjesnik - Znanstveno stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 9 (2003), 3, 4; 3-8 (međunarodna recenzija, članak, znanstveni)

213.

Hnatko, Emil; Majdandžić, Niko; Ergić, Todor; Stoić, Antun; Šarić, Tomislav; Jozić, Marko; Tadijanović, Adam

Application of the Milling Machine Vibration Signal for Cutter Condition Monitoring // Proceedings of the 1st DAAAM International Conference, Advanced Technologies for Developing Countries, ATDC'02 / Katalinić, Branko ; Kljajin, Milan (ur.). (ur.).
Osijek: DAAAM International Vienna& Mech. eng. Faculty Slav. Brod & Grafika Osijek, 2002. str. 483-488 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), pregledni)

214.

Cukor, Goran; Stoić, Antun

A Probabilistic Surface Roughness Model in Laser Cutting Optimisation // Annals of DAAAM for 2002 & Proceedings of the 13th International DAAAM Symposium "Intelligent Manufacturing & Automation: Learning From Nature" / Katalinic, Branko (ur.).
Beč: DAAAM International Vienna, 2002. str. 115-116 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

215.

Stoić, Antun; Cukor, Goran

Optimisation Strategy for Laser Beam Cutting // Annals of DAAAM for 2002 & Proceedings of the 13th International DAAAM Symposium "Intelligent Manufacturing & Automation: Learning From Nature" / Katalinic, Branko (ur.).
Beč: DAAAM International Vienna, 2002. str. 537-538 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

216.

Hnatko, Emil; Majdandžić, Niko; Ergić, Todor; Stoić, Antun; Šarić, Tomislav; Jozić, Marko; Tadijanović, Adam

Application of the milling machine vibration signal for cutter condition monitoring // Proceedings of the 1st DAAAM International Conference on Advanced Technologies for Developing Countries / Katalinić, B ; Kljajin, Milan (ur.).
Slavonski Brod: DAAAM International Vienna ; Mechanical Engineering Faculty S.B., 2002. str. 483-488 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

217.

Kopač, Janez; Stoić, Antun; Šali, Samo; Samardžić, Ivan

The relation between the sound pressure and tool vibrations during the turning process // Proceedings of the 8th International Conference on production engineering / Cebalo R., Schulz H. (ur.).
Zagreb: Croatian association of Production Engineering, 2002. str. I 081- I 091 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

218.

Marušić, Vlatko; Vitez, Ivan; Stoić, Antun

Usporedba otpornosti trošenju po dubini sloja cementiranog i površinski zakaljenog čelika // Proceedings of the 7. Savjetovanje o materijalima, tehnologijama, trenju i trošenju / Ćurković, L. ; Grilec K. (ur.).
Zagreb: Hrvatsko društvo za materijale i tribologiju (HDMT), 2002. str. 119-123 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), pregledni)

219.

Stoić, Antun

Obradivost tvrdih materijala visokobrzinskim tokarenjem, 2002., doktorska disertacija, Fakultet strojarstva i brodogradnje, Zagreb

220.

Raos, Pero; Stoić, Antun; Kopač, Janez

Identification of cutting conditions in turning by noise recording // Proceedings of the 1st DAAAM International Conference on Advanced Technologies for Developing Countries / Katalinić B. & Kljajin M. (ur.).
Slavonski Brod: DAAAM International & Mech. eng. Faculty Slav. Brod, 2002. str. 527-532 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

221.

Cebalo, Roko; Stoić, Antun

Optimization of the roughness of the grinded surface by tool dressing with the diamond roll // Proceedings of the 1st DAAAM International Conference on Advanced Technologies for Developing Countries / Katalinić B.&Kljajin M. (ur.).
Slavonski Brod: DAAAM International &Mechanical Engineering faculty Slavonski Br, 2002. str. 155-160 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

222.

Schulz, Herbert; Stoić, Antun; Alexandar, Sahm

Improvement of cutting process in accordance with process disturbances // 7th International conference on production engineering CIM2001 / Cebalo R., Schulz H. (ur.).
Zagreb: Hrvatska udruga proizvodnog strojarstva, 2001. str. I123-I131 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

223.

Cebalo, Roko; Stoić, Antun

Optimization of the cutting speed at milling // 7th International scientific conference on production engineering CIM2001 / Cebalo R., Schulz, H. (ur.).
Zagreb: Hrvatska udruga proizvodnog strojarstva, 2001. str. I037-I045 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

224.

Milinović, Mario

Tehnologija izrade proizvoda iz lima na kombiniranoj laserskoj rezačici, 2000., diplomski rad, Strojarski fakultet, Slavonski Brod

225.

Samardžić, Ivan; Stoić, Antun; Šarić, Đuro

On line recognition of turning disturbances // Inteligent manufacturing & automation / Katalinić, Branko (ur.).
Beč: DAAAM International, Vienna, 2000. str. 417-418 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)