Pregled po CROSBI profilu: Maja Stanić (CROSBI Profil: 27155, MBZ: 322336)
Pronađeno 37 radova
-
1.Plenković, Mario; Stanić, MajaMOROCCO – STILL UNDER FRENCH INFLUENCE // Media, culture and public relations, 4 (2013), 2; 215-218 (podatak o recenziji nije dostupan, vijest, stručni)
-
2.Stanić, Maja; Lozo, Branka; Gregor Svetec, DianaColorimetric Properties and Stability of 3D Prints // Rapid prototyping journal, 18 (2012), 2; 120-128 doi:10.1108/13552541211212104 (međunarodna recenzija, članak, znanstveni)
-
3.Mazalik, MartinaKromogene boje s ireverzibilnom promjenom za indikatorske etikete valjanosti proizvoda, 2011., diplomski rad, diplomski, Grafički fakultet, Zagreb
-
4.Stanić, Maja; Lozo, BrankaPermanence and Color Stability in 3D Ink-Jet Printing, 2010. (podatak o recenziji nije dostupan, izvještaj).
-
5.Stanić. Maja; Lozo, BrankaPermanence and Color Stability in 3D Ink-jet Printing // 26th International Conference on Digital Printing Technologies / Bruch, Xavier (ur.).
Springfield: Society for Imaging Science and Technology, 2010. str. 541-544 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
6.Stanić, MajaStructure, Surface and Permanence Properties of Three Dimensional Printing Materials, 2010., doktorska disertacija, Grafički fakultet, Zagreb
-
7.Pavic, Maja; Stanic, Maja; Lozo BrankaReadability of 2D QR Codes Depending on Selected Code Parameters // International Joint Conference on Environmental and Light Industry Technologies Abstracts / Rudas, Imre (ur.).
Budimpešta: Obuda University, 2010. str. 157-164 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
8.Odobašić, MarijanaPrimjena 3D tiska u dizajnu ambalaže, 2010., diplomski rad, diplomski, Grafički fakultet, Zagreb
-
9.Meter, MajaOblikovanje uporabnih predmeta 3D modeliranjem, 2010., diplomski rad, preddiplomski, Grafički fakultet, Zagreb
-
10.Rajić, KatarinaKreiranje dizajnerskog QR koda, 2010., diplomski rad, preddiplomski, Grafički fakultet, Zagreb
-
11.Lozo, Branka; Stanić, Maja3D Ink Jet Printing / Stasiak W, James (ur.).
Springfield (VA): Society for Imaging Science and Technology, 2010 -
12.Odobašić, Marijana; Lozo, Branka; Stanić, MajaApplication of 3D printing in packaging design // Active & Intelligent Packaging
Enspijk, Nizozemska, 2010. (predavanje, pp prezentacija, stručni) -
13.Pavić, MajaČitljivost QR 2D kodova s obzirom na oštećenja koda, 2010., diplomski rad, preddiplomski, Grafički fakultet, Zagreb
-
14.Stanić, Maja; Lozo, BrankaImage Analysis in 3D Printing Reproduction // Book of Proceedings / Simončić, Barbara ; Hladnik, Aleš ; Pavko - Čuden, Alenka ; Ahtik, Jure ; Luštek, Barbara ; Demšar, Andrej ; Urbas, Raša (ur.).
Ljubljana: University og Ljubljana, 2010. str. 130-137 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
15.Levlin, Jan-Erik; Grossmann, Harald; Read, Barry; Ervasti, Ilpo; Hooimeijer, Arie; Lozo, Branka; Sain-Armand, Francois Julien; Cochaux, Alain; Faul, Andreas; Ringman, Jori et al.The Future of Paper Recycling in Europe: Opportunities and Limitations / Stawicki, Bartek ; Read, Barry (ur.).
Carlton: PITA, 2010 -
16.Stanić, Maja; Lozo, Branka; Walters, PeterReproduction in Three-Dimensional Ink-Jet Printing // The Journal of imaging science and technology, 54 (2010), 6; 60201-1 (međunarodna recenzija, članak, znanstveni)
-
17.Jamnicki, Sonja; Pèlach Serra, Maria Àngels; Lozo, Branka; Stanić, Maja; Barušić, LidijaDeinking flotation of recycled linerboard for food packaging applications // Cellulose chemistry and technology, 44 (2010), 10; 481-488 (međunarodna recenzija, članak, znanstveni)
-
18.Stanić, Maja; Lozo, Branka; Baučić, Teo3D Printing – Effect of Object Orientation on Print Elements Reproduction // Impact Print Conference 2009 / Hoskins, Stephens (ur.).
Bristol: University of the West England, 2009. str. 95-99 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
19.Stanić, Maja; Walters, Peter; Lozo, BrankaImage Analysis of Surface Elements Reproduction Quality in 3D Ink-jet Printing // 25th International Conference on Digital Printing Technologies / Sakai, Shinri (ur.).
Springfield: The Society for Imaging Science and Technology, 2009. str. 813-816 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
20.Lukić, BrankaInterakcija materijala u 3D ink jet tisku, 2009., diplomski rad, Grafički fakultet, Zagreb, Hrvatska
-
21.Lovrić, NeraKreacija 3D ink jet objekata, 2009., diplomski rad, Grafički fakultet, Zagreb, Hrvatska
-
22.Stanić, Maja; Lozo, Branka; Lovrić, NeraTHREE-DIMENSIONAL PRINTING AND GRAPHIC TECHNOLOGY: HOW DO THEY FIT IN? // Management of Technology Step to Sustainable Production Conference Proceedings / Čosić, Predrag (ur.).
Zagreb: Faculty of Mechanical Engineering and Naval Architecture, Zagreb and Faculty of Management, Koper, 2009. str. 190-195 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), ostalo) -
23.Ćosić, MarijaPrimjena slikovne analize u karakterizaciji papira za Ink Jet tisak, 2009., diplomski rad, Grafički fakultet, Zagreb
-
24.Guteša, AleksandraTermalni papiri – primjena i karakteristike, 2009., diplomski rad, Grafički fakultet, Zagreb
-
25.Trezner, ŽeljkoReceptivna turistička agencija kao destinacijska menadžment kompanija (Destination management company) - DMC // Destinacijske menadžment kompanije: razumijevanje poslovanja i uspješni marketing / Stanić, Maja (ur.).
Zagreb: Udruga hrvatskih putničkih agencija (UHPA), 2008. str. 49-60 -
26.Hladnik, Aleš; Muck, Tadeja; Stanić, MajaAnalysis of the Paper Formation and Periodic Structures by FFT Processing // ImageJ User & Developer Conference / Jahnen, Andreas ; Moll, Christian (ur.) (ur.).
Luxembourg: Centre de Recherche Public Henri Tudor, 2008. (poster, međunarodna recenzija, sažetak, znanstveni) -
27.Stanić, Maja; Muck, Tadeja; Hladnik, Aleš; Lozo, BrankaApplication of ImageJ in Printing Technology – Use of Macros for Automation of Analysis Procedures // ImageJ User & Developer Conference / Jahnen, Andreas ; Moll, Christian (ur.).
Luxembourg: Centre de Recherche Public Henri Tudor, 2008. (poster, međunarodna recenzija, sažetak, znanstveni) -
28.Baučić, TeoKarakterizacija Ink Jet 3D otisaka slikovnom analizom, 2008., diplomski rad, Grafički fakultet, Zagreb
-
29.Stanić, Maja; Lozo, Branka; Muck, Tadeja; Jamnicki, Sonja; Kulčar, RahelaColor Measurements of Three-dimensional Ink-jet Prints // 24th International Conference on Digital Printing Technologies (NIP24) : Digital Fabrication 2008 : Technical Programm and Proceednigs / Yuh, Huoy-Jen ; Baumann, Reinhard (ur.).
Springfield: The Society for Imaging Science and Technology, 2008. str. 623-626 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
30.Jamnicki, Sonja; Barbarić Mikočević, Željka; Stanić, Maja; Lozo, Branka; Muck, TadejaIntroduction of Computer Print-outs in the Recycling Process of Printed Folding Box-Board // Progress in paper recycling, 18 (2008), 1; 4-8 (međunarodna recenzija, članak, znanstveni)
-
31.Lozo, Branka; Stanić, Maja; Muck, Tadeja; Jamnicki, Sonja; Mahović Poljaček, SanjaThree-Dimensional Ink Jet Prints - Impact of Infiltrants // The Journal of imaging science and technology, 52 (2008), 5; 051004-1 (međunarodna recenzija, članak, znanstveni)
-
32.Paulenka, Marina; Kulčar, Rahela; Stanić, MajaEvaluation of Color Reproduction and Print Quality Elements of Ink-jet Prints on Uncoated // Printing future days 2007 / Schuhmann, Conny ; Baumann, Reinhard R. (ur.).
Chemnitz: Chemnitz University of Technology, 2007. str. 97-103 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
33.Stanić, Maja; Jamnicki, Sonja; Lozo, Branka; Muck, TadejaThe interpretation of IGT Fluff test results by image analysis // International Meeting of Slovene Paper Industry : 11th Days of Slovene Paper Industry and 34th International Annual Symposium DITP / Iglič, Božo (ur.).
Ljubljana: Društvo inžinirjev in tehnikov Slovenije, 2007. (predavanje, međunarodna recenzija, sažetak, znanstveni) -
34.Barbarić Mikočević, Željka; Jamnicki, Sonja; Stanić, Maja; Muck, Tadeja; Lozo, BrankaRecycling of Varnished Offset Printed Packaging Prints // Celulosa i hartia, 37 (2007), 4; 16-20 (podatak o recenziji nije dostupan, članak, znanstveni)
-
35.Lozo, Branka; Stanić, Maja; Jamnicki, Sonja; Muck, Tadeja3D Printing as a Function of 2D Printing // Digital Fabrication 2007 : Proceedings / Creagh, Linda (ur.).
Springfield: The Society for Imaging Science and Technology, 2007. str. 902 - 907 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
36.Lozo, Branka; Stanić, MajaUniverzalnost jednog muzejskog predmeta : Tisak poštanskih maraka, 2007. (podatak o recenziji nije dostupan, popularni rad).
-
37.Jamnicki, Sonja; Stanić, Maja; Barbarić Mikočević, Željka; Muck, Tadeja; Lozo, BrankaMulti-Stage Chemical Flotation of Food Packaging Prints // Investigacion y tecnica del papel / Villar, J. (ur.).
Madrid: IPE - Instituto Papelero Espanol, 2007. str. 98 - 103 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
