Pregled po CROSBI profilu: Stoja Rešković (CROSBI Profil: 23401, MBZ: 57806)
Pronađeno 183 radova
-
26.Slokar Benić, Ljerka; Rešković, Stoja; Marciuš, Marijan; Brlić, TinChange of microstructure of Nb microalloyed steel at start of the plastic flow during the cold deformation // Proceedings of The IIER International Conference / Suresh, Parimi (ur.).
Bhubaneswar: IRAJ Research Forum, 2019. str. 17-19 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
27.Grizelj, Branko; Rešković, Stoja; Samardžić, Ivan; Marić, DejanMetallurgy-Metal Forming // 17. SKUP O PRIRODNOM PLINU, TOPLINI I VODI 17th NATURAL GAS, HEAT AND WATER CONFERENCE 10. MEĐUNARODNI SKUP O PRIRODNOM PLINU, TOPLINI I VODI 10th INTERNATIONAL NATURAL GAS, HEAT AND WATER CONFERENCE / Pero RAOS, glavni urednik Tomislav GALETA Dražan KOZAK Marija RAOS Josip STOJŠIĆ Zlatko TONKOVIĆ (ur.).
Osijek: J. J. Strossmayer Universiti of Osijek and University of Pech, 2019. str. 241-250 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
28.Rešković, Stoja; Grizelj, Branko; Brlić, Tin; Balenović, MarijanThe application of a factorial experiment with repeated measurements in the investigation of parameters influencing the properties of niobium microalloyed cold drawn welded steel tubes // Transactions of FAMENA, 43 (2019), 4; 17-26 (međunarodna recenzija, članak, znanstveni)
-
29.Jandrlić, Ivan; Rešković, Stoja; Čurćija, Dušan; Lazić, Ladislav; Brlić, TinModeling of stress distribution on the basis of the measured values of strain and temperature changes // AIMS Materials Science, 6 (2019), 4; 601-609 doi:10.3934/matersci.2019.4.601 (međunarodna recenzija, članak, znanstveni)
-
30.Tarandek, Patrik; Rešković, Stoja; Perković Obućina, Tihana; Kostić, Saša; Brlić, TinCold drawing of steel tubes // 18th International Foundrymen Conference - Coexistence of Material Science and Sustainable Technology in Economic Growth - Students' section / Ljerka Slokar Benić, Zdenka Zovko Brodarac (ur.).
Sisak, 2019. str. 11-11 (predavanje, sažetak, znanstveni) -
31.Skender, Filip; Brlić, Tin; Rešković, StojaInfluence of stretching rate on the beginning of cold deformation in niobium microalloyed steel // 18th International Foundrymen Conference - Coexistence of Material Science and Sustainable Technology in Economic Growth - Students' section / Slokar Benić, Ljerka ; Zovko Brodarac, Zdenka (ur.).
Sisak, 2019. str. 10-10 (predavanje, sažetak, znanstveni) -
32.Slokar Benić, Ljerka; Jandrlić, Ivan; Rešković, StojaEffect of subsequent heating on the microstructure and mechanical properties of Nb microalloyed steel // 18th International foundrymen conference, Coexistence of material science and sustainable technology in economic growth / Dolić, Natalija ; Zovko Brodarac, Zdenka ; Begić Hadžipašić, Anita (ur.).
Sisak: Metalurški fakultet Sveučilišta u Zagrebu, 2019. str. 180-187 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
33.Jandrlić, Ivan; Rešković, Stoja; Lazić, Ladislav; Brlić, Tin; Ćurčija, DušanAppropriate mathematical model for stress calculation based on the measured values of deformation and temperature changes // 18th International foundrymen conference, Coexistence of material science and sustainable technology in economic growth / Dolić, Natalija ; Zovko Brodarac, Zdenka ; Begić Hadžipašić, Anita (ur.).
Sisak: Metalurški fakultet Sveučilišta u Zagrebu, 2019. str. 145-152 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
34.Brlić, Tin; Debruyne, Dimitri; Lava, Pascal; Rešković, Stoja; Jandrlić, IvanIdentification of Lüders bands using digital image correlation // The Holistic Approach to Environment, 9 (2019), 1; 8-11 doi:.org/10.33765/thate.9.1.2 (međunarodna recenzija, članak, znanstveni)
-
35.Vodopivec, Franc; Mamuzić, Ilija; Rešković, StojaCreep resisting steels, nanoparticles, interparticles matrix stresses, mobile dislocations motion and creep rate // Metalurgija, 58 (2019), 1-2; 103-105 (međunarodna recenzija, članak, znanstveni)
-
36.Komosar, KarloUtjecaj mikrolegirajućeg elementa niobija na raspodjelu naprezanja kod hladne deformacije, 2018., diplomski rad, preddiplomski, Metalurški fakultet, Sisak
-
37.Skender, FilipUtjecaj mikrostrukture i brzine deformacije na početak hladne deformacije čelika mikrolegiranog niobijem, 2018., diplomski rad, preddiplomski, Metalurški fakultet, Sisak
-
38.Rešković, Stoja; Jandrlić, Ivan; Brlić, TinThe influence of niobium content and initial microstructure of steel on the occurrence of Lüders band at the start of the plastic flow during cold deformation // IOP conference series. Materials science and engineering, 461 (2018), 1; 1-6 doi:10.1088/1757-899X/461/1/012070 (međunarodna recenzija, članak, znanstveni)
-
39.Brlić, Tin; Rešković, Stoja; Jandrlić, Ivan; Skender, FilipInfluence of strain rate on stress changes during Lüders bands formation and propagation // IOP conference series. Materials science and engineering, 461 (2018), 1; 1-6 doi:10.1088/1757-899X/461/1/012007 (međunarodna recenzija, članak, znanstveni)
-
40.Jandrlić, Ivan; Rešković, Stoja; Brlić, Tin; Furlan, VjeranEffect of deformation rate on low carbon steels mechanical properties // IOP conference series. Materials science and engineering, 461 (2018), 1; 1-6 doi:10.1088/1757-899X/461/1/012030 (međunarodna recenzija, članak, znanstveni)
-
41.Aleksandrov Fabijanić, Tamara; Brlić, Tin; Jandrlić, Ivan; Franz, Mladen; Alar, Željko; Rešković, StojaThe influence of Nb content on the mechanical properties of micro alloyed low carbon steels // 19th World Congress on Materials Science and Engineering – conference proceedings / Journal of Material Sciences & Engineering, 7
Brisel: Hilaris Publishing, 2018. str. 151-152 doi:10.4172/2169-0022-C8-113 (predavanje, međunarodna recenzija, sažetak, znanstveni) -
42.Jandrlić, Ivan; Rešković, Stoja; Brlić, Tin; Hršak, DamirThe Possibility of Using Adhesive for Bonding Steel with Ceramics // Acta mechanica Slovaca, 22 (2018), 2; 30-33 doi:10.21496/ams.2018.014 (međunarodna recenzija, članak, stručni)
-
43.Brlić, Tin; Rešković, Stoja; Vodopivec, Franc; Jandrlić, IvanLüders bands at the beginning of the plastic flow of materials // Metalurgija, 57 (2018), 4; 357-359 (međunarodna recenzija, pregledni rad, znanstveni)
-
44.Aleksandrov Fabijanić, Tamara; Brlić, Tin; Jandrlić, Ivan; Franz, Mladen; Alar, Željko; Rešković, StojaThe influence of Nb content on the mechanical properties of micro alloyed low carbon steels // Proceedings of 19th World Congress on Materials Science and Engineering
London : Delhi: Conference Series Ilc LTD, 2018. str. 151-152 (predavanje, međunarodna recenzija, prošireni sažetak, znanstveni) -
45.Jandrlić, Ivan; Rešković, Stoja; Brlić, TinDistribution of stress in deformation zone of niobium microalloyed steel // Metals and materials international, 24 (2018), 4; 746-751 doi:10.1007/s12540-018-0099-2 (međunarodna recenzija, članak, znanstveni)
-
46.Ević, DarkoUtjecaj kemijskog sastava i parametara deformacije na mehanička svojstva cijevi, 2017., diplomski rad, Metalurški fakultet, Sisak, Hrvatska
-
47.Jandrlić, Ivan; Rešković, Stoja; Lazić, Ladislav; Alar, Željko; Udiljak, Toma; Brlić, TinPossibility of using thermography and digital image correlation for determination of stress and strain distribution in deformation zone // Proceeding MTECH 2017 / Kovačić, Saša ; Kurtela, Marin ; Markučić, Damir ; Sakoman, Matija (ur.).
Zagreb: Croatian Socitey for Materials and Tribology, 2017. str. 35-43 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
48.Rešković, Stoja; Brlić, Tin; Jakovljević, Suzana; Jandrlić IvanSurface contamination of alumina ceramics by carbon // Engineering review (Technical Faculty University of Rijeka), 37 (2017), 3; 335-340 (međunarodna recenzija, članak, znanstveni)
-
49.Lazić, Ladislav; Rešković, Stoja; Jandrlić, Ivan; Brlić, TinDetermination of the emissivity of coatings for preparation of samples in thermographic testings // Proceedings of the 25th International Conference on Ecological Truth / Radoje V. Pantovic, Zoran S. Markovic (ur.).
Bor: University of Belgrade - Technical Faculty in Bor, 2017. str. 100-107 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
50.Rešković, Stoja; Brlić, Tin; Vodopivec, Franc; Novosel-Radović, Vjera; Franz, MladenInfluence of Finish Rolling Temperature on the Mechanical Properties of Niobium Microalloyed Tubes // Proceedings of 16th International Scientific Conference on Production Engineering - CIM 2017 / E. Abele, T. Udiljak, D. Ciglar (ur.).
Zagreb: Hrvatska udruga proizvodnog strojarstva, 2017. str. 213-216 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
