Pregled po CROSBI profilu: Stoja Rešković (CROSBI Profil: 23401, MBZ: 57806)
Pronađeno 183 radova
-
1.Brlić, Tin; Lazić, Ladislav; Franz, Mladen; Jandrlić, Ivan; Rešković, StojaStress distribution at different deformation degrees in low carbon steel during cold deformation // Engineering review (Technical Faculty University of Rijeka), 42 (2022), 1; 103-108 doi:10.30765/er.1745 (međunarodna recenzija, članak, znanstveni)
-
2.Vodopivec, F.; Rešković, S.; Mamuzić, IlijaThe influence of Nb content on the crystal latice distortion of a final thermomechanical treatment microalloyed steel // Book of abstracts of the 15th International Symposium of Croatian Metallurgical Society - SHMD '2022, Materials and metallurgy (published in: Metalurgija 61 (2022) 2) / Mamuzić, Ilija (ur.).
Zagreb: Hrvatsko metalurško društvo, 2022. str. 553-554 (poster, međunarodna recenzija, sažetak, znanstveni) -
3.Rešković, Stoja; Balenović, Marijan; Grizelj, Branko; Samardžić, Ivan; Lazić, Ladislav; Duspara, MiroslavPERFORMANCE OF THE DEVICE FOR REMOVING THE INTERNAL EXCESS OF WELDING ON SEAM PIPES // 11. INTERNATIONAL SCIENTIFIC-PROFESSIONAL CONFERENCE SBW 2021 „ENGINEERING TECHNOLOGIES IN MANUFACTURING OF WELDED CONSTRUCTIONS AND PRODUCTS, SBW 2021“ / Samardžić, Ivan ; Duspara, Miroslav ; Marić, Dejan (ur.).
Slavonski Brod: University of Slavonski Brod, Mechanical Engineering Faculty in Slavonski Brod, 2021. str. 31-35 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
4.Brlić, Tin; Rešković, Stoja; Jandrlić, Ivan; Aleksandrov Fabijanić, Tamara; Lazić, LadislavApplication of thermography in determining the proportionality limit // Conference proceedings of 11th International scientific-professional conference SBW 2021 „Engineering technologies in manufacturing of welded constructions and products, SBW 2021“ / Samardžić, Ivan ; Duspara, Miroslav ; Marić, Dejan (ur.).
Slavonski Brod: University of Slavonski Brod, Mechanical Engineering Faculty in Slavonski Brod, 2021. str. 15-18 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
5.Grizelj, Branko; Rešković, Stoja, Samardžić, Ivan; Marić, Dejan; Duspara, Miroslav; Špoljarić, Lidija; Vuletić, Katica; Putnik, IvanThermally activated processes - metal forming // PLIN2021 19. skup o prirodnom plinu, toplini i vodi 12. međunarodni skup o prirodnom plinu, toplini i vodi 19th Natural Gas, Heat and Water Conference 12th International Natural Gas, Heat and Water Conference / Raus, Pero glavni urednik ; Galeta, Tomislav ; Kozak, Dražan ; Raus, Marija ; Stojšić, Josip ; Sutlović, Igor ; Tonković, Zlatko (ur.).
Osijek, 2021. str. 157-163 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
6.Rešković, Stoja; Jandrlić, Ivan; Brlić, Tin; Hršak, Damir; Tarandek, PatrikChemical preparation of tubes before cold drawing // Proceedings book of 2nd International Conference „The Holistic Approach to Environment“ Virtual Conference 2021. / Štrkalj, Anita ; Glavaš, Zoran (ur.).
Sisak: Udruga za promicanje cjelovitog pristupa okolišu, 2021. str. 534-542 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
7.Skender, FilipAnizotropno ponašanje toplo valjane trake tijekom hladne deformacije, 2020., diplomski rad, Metalurški fakultet, Sisak
-
8.Brlić, TinPojava Lüdersovih linija kod niobijem mikrolegiranoga čelika, 2020., doktorska disertacija, Metalurški fakultet, Sisak
-
9.Grizelj, Branko; Rešković, Stoja; Marić, Dejan; Duspara, Miroslav; Brlić, Tin; Vuletić, Katica; Putnik, IvanSome influences on the mechanical properties of steel // Plin 2020 / Pero RAOS, glavni urednik Tomislav GALETA Dražan KOZAK Marija RAOS Josip STOJŠIĆ Igor SUTLOVIĆ Zlatko TONKOVIĆ (ur.).
Osijek: Sveučilište u Slavonskom Brodu, 2020. str. 224-235 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
10.Brlić, Tin; Rešković, Stoja; Jurkovic, Zoran; Janes, GordanMathematical modeling of influence parameters during formation and propagation of the Lüders bands // Facta Universitatis-Series Mechanical Engineering, 18 (2020), 4; 595-610 doi:10.22190/FUME200416041B (međunarodna recenzija, članak, znanstveni)
-
11.Rešković, stojaOsnove teorije oblikovanja deformiranjem / Ljerka Slokar Benić, Ivan Jandrlić (ur.).
Sisak: Metalurški fakultet Sisak, 2020 -
12.Rešković, Stoja; Brlić, Tin; Skender FilipApplication the Method Digital Image Correlation for Measurement of Small Deformations at the Beginning of Plastic Flow of Materials // New Technologies, Development and Application III / Karabegović, Isak (ur.).
Cham: Springer, 2020. str. 299-304 doi:10.1007/978-3-030-46817-0_34 -
13.Vodopivec, F.; Mamuzić, Ilija; Rešković, StojaCreep resisting steels, nanoparticles, interparticles matrix stresses, mobile dislocations motion and creep rate // Book of abstracts of the 14th International Symposium of Croatian Metallurgical Society - SHMD '2020, Materials and metallurgy (tiskano u: Metalurgija 59 (2020) 3) / Mamuzić, Ilija (ur.).
Zagreb: Hrvatsko metalurško društvo, 2020. str. 425-425 (poster, međunarodna recenzija, sažetak, znanstveni) -
14.Rešković, Stoja; Slokar Benić, Ljerka; Lovrenić- Jugović, MartinaThe Interdependence of the Degree of Precipitation and Dislocation Density during the Thermomechanical Treatment of Microalloyed Niobium Steel // Metals, 10 (2020), 2; 1-11 doi:10.3390/met10020294 (međunarodna recenzija, članak, znanstveni)
-
15.Rešković, Stoja; Jandrlić, Ivan; Brlić, Tin; Vodopivec, FrancEffects of preferred grain orientation on the on lüders bands appearance // Metalurgija, 59 (2020), 1; 59-62 (međunarodna recenzija, članak, znanstveni)
-
16.Brlić, Tin; Rešković, Stoja; Jandrlić, IvanInfluence of Niobium Content on Strain Amount in Lüders Bands in Niobium Microalloyed Steel // Metals and materials international, 26 (2020), 2; 179-187 doi:10.1007/s12540-019-00336-w (međunarodna recenzija, članak, znanstveni)
-
17.Rešković, Stoja; Brlić, Tin; Jandrlić, Ivan; Vodopivec, FrancInfluence of Strip Cooling Rate on Lüders Bands Appearance During Subsequent Cold Deformation // New Technologies, Development and Application II / Karabegović, Isak (ur.).
Cham: Springer, 2020. str. 115-121 doi:10.1007/978-3-030-18072-0_12 -
18.Rešković, Stoja; Brlić, TinUpravljanje kvalitetom / prof.dr.sc. Zoran Glavaš, prof.dr.sc. Biserka Runje (ur.).
Sisak: Metalurški fakultet Sveučilišta u Zagrebu, 2019 -
19.Slokar Benić, Ljerka; Rešković, Stoja; Marciuš, Marijan; Brlić, TinChange of microstructure of Nb microalloyed steel at start of the plastic flow during the cold deformation // International Journal of Mechanical and Production Engineering, 7 (2019), 12; 120-122 (međunarodna recenzija, članak, znanstveni)
-
20.Rešković, Stoja; Balenović, Marijan; Grizelj, Branko; Duspara, MiroslavINFLUENCE OF NIOBI ON QUALITY HIGH-FREQUENCY WELDED PIPE // „STROJARSKE TEHNOLOGIJE U IZRADI ZAVARENIH KONSTRUKCIJA I PROIZVODA, SBZ 2019.“ „ENGINEERING TECHNOLOGIES IN MANUFACTURING OF WELDED CONSTRUCTIONS AND PRODUCTS, SBW 2019.“ / Samardžić, Ivan ; Duspara, Miroslav (ur.).
Slavonski Brod: Strojarski fakultet u Slavonskom Brodu Mechanical Engineering Faculty in Slavonski Brod, 2019. str. 51-59 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
21.Rešković Stoja, Balenović Marijan, Grizelj Branko, Duspara MiroslavInfluence of niobi on quality high-frequency welded pipe // PROCEEDINGS OF FULL PAPER:10. International scientific-professional conference SBW 2019 „Engineering technologies in manufacturing of welded constructions and products, SBW 2019“ / Samardžić Iva, Duspara Miroslav (ur.).
Slavonski Brod: , Mechanical Engineering Faculty in Slavonski Brod, J. J. Strossmayer University of Osijek,, 2019. str. ¨51-105 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
22.Aleksandrov-Fabijanić Tamara, Franz Mladen, Rešković StojaDetermination of mechanical properties of niobium micro-Alloyed steel using instrumented indentation test // PROCEEDINGS from the 18th International foundrymen conference, Coexistence of material science and sustainable technology in economic growth / Dolić, Natalija ; Zovko Brodarac, Zdenka ; Begić Hadžipašić, Anita (ur.).
Sisak: Metalurški fakultet Sveučilišta u Zagrebu, 2019. str. 95-105 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
23.Matvija, Miloš; Rešković, Stoja; Brlić, TinDistribution of dislocations on the Lüders band front during cold deformation in steel // Proceedings from the 14th multinational congress on microscopy / Grbović-Novaković Jasmina, Nestorović Nataša, Rajnović Dragan (ur.).
Beograd: Institute for Biological Research “Siniša Stanković”, 2019. str. 343-345 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
24.Rešković, Stoja; Balenović, Marijan; Jandrlić, Ivan; Brlić, TinThe influence of niobium precipitates in the cold drawing pipe // Conference proceedings METAL 2019 / Different Authors (ur.).
Ostrava: 2019 Tanger, Ltd, 2019. str. 102-102 (poster, međunarodna recenzija, prošireni sažetak, znanstveni) -
25.Jandrlić, Ivan; Rešković, Stoja; Tarandek, Patrik; Slokar Benić, Ljerka; Brlić, TinStudy on strengthening during cold drawing of steel tubes // Proceedings of 9th International Conference Mechanical Technologies and Structural Materials 2019 / Jozić, Sonja ; Lela, Branimir (ur.).
Split: Hrvatsko društvo za strojarske tehnologije, 2019. str. 83-88 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
