Pregled po CROSBI profilu: Zlatan Car (CROSBI Profil: 21372, MBZ: 259465)
Pronađeno 286 radova
Prikaz po CROSBI kategorijama
-
1.RI-STEM-2022 Proceedings / Baressi Šegota, Sandi ; Lorencin, Ivan ; Anđelić, Nikola ; Car, Zlatan (ur.). Rijeka: Tehnički fakultet Sveučilišta u Rijeci, 2022 (zbornik)
-
2.Ri-STEM-2021 Proceedings / Lorencin, Ivan ; Baressi Šegota, Sandi ; Car, Zlatan (ur.). Rijeka: Studentski zbor Sveučilišta u Rijeci, 2021 (zbornik)
-
3.Proceedings of International Conference on Innovative Technologies, IN-TECH 2017 / Pepelnjak, Tomaž ; Car, Zlatan ; Kudláček, Jan (ur.). Ljubljana: Tehnički fakultet Sveučilišta u Rijeci, 2017 (zbornik)
-
4.Proceedings of International Conference on Innovative Technologies, IN-TECH 2016 / Car, Zlatan ; Kudláček, Jan (ur.). Prag: Tehnički fakultet Sveučilišta u Rijeci, 2016 (zbornik)
-
5.Proceedings of International Conference on Innovative Technologies, IN-TECH 2015 / Car, Zlatan ; Kudláček, Jan (ur.). Rijeka: Tehnički fakultet Sveučilišta u Rijeci, 2015 (zbornik)
-
6.Proceedings of International Conference on I nnovative Technologies, IN-TECH 2014 / Zlatan Car, Jan Kudláček, João Rafael da Costa Sanches Galvão (ur.). Prag: Tehnički fakultet Sveučilišta u Rijeci, 2014 (zbornik)
-
7.Proceedings of International Conference on Innovative Technologies IN-TECH 2013 / Car, Zlatan ; Kudláček, Jan ; Szalay, Tibor (ur.). Rijeka: Tehnički fakultet Sveučilišta u Rijeci, 2013 (zbornik)
-
8.Proceedings of International Conference on Innovative Technologies IN-TECH 2012 / Car, Zlatan ; Kudláček, Jan ; Pepelnjak, Tomaž (ur.). Rijeka: Tehnički fakultet Sveučilišta u Rijeci, 2012 (zbornik)
-
9.Proceedings of International Conference on Innovative Technologies IN-TECH 2011 / Kudlaček, Jan ; Car, Zlatan ; Barišić, Branimir ; Pepelnjak, Tomaž ; Pakosta, Michal ; Kršulja, Marko (ur.). Prag: Tisk AS Jaroměř, 2011 (zbornik)
-
1.Edge Detector-Based Hybrid Artificial Neural Network Models for Urinary Bladder Cancer Diagnosis // Studies in Computational Intelligence "Enabling AI Applications in Data Science" / Hassanien, Aboul-Ella ; N. Taha, Mohamed Hamed ; M. Khalifa, Nour Eldeen (ur.).
Cham: Springer, 2021. str. 225-245 doi:10.1007/978-3-030-52067-0_10 -
2.Example of 3D Measurements and Analysis the Optical Eyepiece Holder // Development of Mechanical Engineering as a Tool for Enterprise Logistic Progress / Legutko, Stanislaw (ur.).
Poznań: Poznan University of Technology, 2006. str. 285-291 -
1.Determining the influence and correlation for parameters of flexible forming using the random forest method // Applied soft computing, 144 (2023), 110497, 18 doi:10.1016/j.asoc.2023.110497 (međunarodna recenzija, članak, znanstveni)
-
2.Quality Assessment Assistance of Lateral Knee X-rays: A Hybrid Convolutional Neural Network Approach // Mathematics, (2023), 11(10); 2392, 21 doi:10.3390/math11102392 (međunarodna recenzija, članak, znanstveni)
-
3.Estimation of Interaction Locations in Super Cryogenic Dark Matter Search Detectors Using Genetic Programming-Symbolic Regression Method // Applied sciences (Basel), 13 (2023), 4; 1-23 doi:10.3390/app13042059 (međunarodna recenzija, članak, znanstveni)
-
4.Detection and Classification of Printed Circuit Boards Using YOLO Algorithm // Electronics (Basel), 12 (2023), 3; 667, 21 doi:10.3390/electronics12030667 (međunarodna recenzija, članak, znanstveni)
-
5.On the Use of a Genetic Algorithm for Determining Ho–Cook Coefficients in Continuous Path Planning of Industrial Robotic Manipulators // Machines, 11 (2023), 2; 167, 19 doi:10.3390/machines11020167 (međunarodna recenzija, članak, znanstveni)
-
6.Localization and Classification of Venusian Volcanoes Using Image Detection Algorithms // Sensors, 23 (2023), 3; 1224, 31 doi:10.3390/s23031224 (međunarodna recenzija, članak, znanstveni)
-
7.On Approximating the pIC50 Value of COVID-19 Medicines In Silico with Artificial Neural Networks // Biomedicines, 11 (2023), 2; 284, 22 doi:https:// .org/10.3390/biomedicines11020284 (međunarodna recenzija, članak, znanstveni)
-
8.Development of Symbolic Expressions for the Detection of Hepatitis C Patients and the Disease Progression from Blood Parameters Using Genetic Programming- Symbolic Classification Algorithm // Applied sciences (Basel), 13 (2023), 1; 1-33 doi:10.3390/app13010574 (međunarodna recenzija, članak, znanstveni)
-
9.The Development of Symbolic Expressions for Fire Detection with Symbolic Classifier Using Sensor Fusion Data // Sensors, 23 (2023), 1; 1-27 doi:10.3390/s23010169 (međunarodna recenzija, članak, znanstveni)
-
10.Estimation of Excitation Current of a Synchronous Machine Using Machine Learning Methods // Computers (Basel), 12 (2023), 1; 1-25 doi:10.3390/computers12010001 (međunarodna recenzija, članak, znanstveni)
-
11.Automated Detection and Classification of Returnable Packaging Based on YOLOV4 Algorithm // Applied sciences (Basel), 12 (2022), 21; 11131, 34 doi:10.3390/app122111131 (međunarodna recenzija, članak, znanstveni)
-
12.Prediction of main particulars of container ships using artificial intelligence algorithms // Ocean engineering, 265 (2022), 112571, 14 doi:10.1016/j.oceaneng.2022.112571 (međunarodna recenzija, članak, znanstveni)
-
13.Mean Phase Voltages and Duty Cycles Estimation of a Three-Phase Inverter in a Drive System Using Machine Learning Algorithms // Electronics (Basel), 11 (2022), 16; 2632, 28 doi:10.3390/electronics11162623 (međunarodna recenzija, članak, znanstveni)
-
14.Applying Regressive Machine Learning Techniques in Determination of COVID-19 Vaccinated Patients’ Influence on the Number of Confirmed and Deceased Patients // Mathematics, 10 (2022), 16; 1-24 doi:10.3390/math10162925 (međunarodna recenzija, članak, znanstveni)
-
15.CLASSIFICATION OF DRUG CONSUMERS USING ARTIFICIAL INTELLIGENCE ALGORITHMS // World of health, 4 (2022), 56-63 (domaća recenzija, članak, znanstveni)
-
16.Genetic Algorithm-Based Parametrization of a PI Controller for DC Motor Control // Tehnički glasnik, 16 (2022), 1; 16-22 doi:10.31803//tg-20201119185015 (međunarodna recenzija, članak, znanstveni)
-
17.URINARY BLADDER CANCER DIAGNOSIS USING CUSTOMIZED VGG-16 ARCHITECTURES // World of health, 4 (2022), 64-69 (međunarodna recenzija, članak, znanstveni)
-
18.Prediction of Robot Grasp Robustness using Artificial Intelligence Algorithms // Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 29 (2022), 1; 101-107 doi:10.17559/TV-20210204092154 (međunarodna recenzija, članak, znanstveni)
-
19.Thermodynamic Analysis of CO2 Closed-Cycle Gas Turbine for Marine Applications at Various Pressure Ratios // Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 29 (2022), 1; 51-59 doi:10.17559/TV-20200716182721 (međunarodna recenzija, članak, znanstveni)
-
20.CLASSIFICATION OF DRUG CONSUMERS USING ARTIFICIAL INTELLIGENCE ALGORITHMS // World of health, 4 (2021), 56-63 (međunarodna recenzija, članak, znanstveni)
-
21.Determining residuary resistance per unit weight of displacement with Symbolic Regression and Gradient Boosted Tree algorithms // Pomorstvo : scientific journal of maritime research, 35 (2021), 2; 287-296 doi:10.31217/p.35.2.11 (međunarodna recenzija, članak, znanstveni)
-
22.Semantic Segmentation of Urinary Bladder Cancer Masses From CT Images: A Transfer Learning Approach // Biology, 10 (2021), 11; 1134, 25 doi:10.3390/biology10111134 (međunarodna recenzija, članak, znanstveni)
-
23.Epidemiological predictive modeling of COVID-19 infection: development, testing, and implementation on the population of the Benelux union // Frontiers in Public Health, 9 (2021), 727274, 24 doi:10.3389/fpubh.2021.727274 (međunarodna recenzija, članak, znanstveni)
-
24.Semantic segmentation of chest X-ray images based on the severity of COVID-19 infected patients // EAI Endorsed Transactions on Bioengineering and Bioinformatics, 21 (2021), 3; e3, 8 doi:10.4108/eai.7-7-2021.170287 (međunarodna recenzija, članak, znanstveni)
-
25.Use of Genetic Programming for the Estimation of CODLAG Propulsion System Parameters // Journal of marine science and engineering, 9 (2021), 6; 612, 31 doi:10.3390/jmse9060612 (međunarodna recenzija, članak, znanstveni)
-
26.Automated Pipeline for Continual Data Gathering and Retraining of the Machine Learning-Based COVID-19 Spread Models // EAI Endorsed Transactions on Bioengineering and Bioinformatics, 21 (2021), 3; e2, 9 doi:10.4108/eai.4-5-2021.169582 (međunarodna recenzija, članak, znanstveni)
-
27.An Enhanced Histopathology Analysis: An AI- Based System for Multiclass Grading of Oral Squamous Cell Carcinoma and Segmenting of Epithelial and Stromal Tissue // Cancers, 13 (2021), 8; 1-21 doi:10.3390/cancers13081784 (međunarodna recenzija, članak, znanstveni)
-
28.Combined machine learning and finite element simulation approach towards personalized model for prognosis of COVID-19 disease development in patients // EAI Endorsed Transactions on Bioengineering and Bioinformatics, 21 (2021), 2; e6, 10 doi:10.4108/eai.12-3-2021.169028 (međunarodna recenzija, članak, znanstveni)
-
29.Thermodynamic Analysis of a Condensate Heating System from a Marine Steam Propulsion Plant with Steam Reheating // Journal of Marine Science and Application, 20 (2021), 1-11 doi:10.1007/s11804-021-00191-5 (međunarodna recenzija, članak, znanstveni)
-
30.On Urinary Bladder Cancer Diagnosis: Utilization of Deep Convolutional Generative Adversarial Networks for Data Augmentation // Biology, 10 (2021), 3; 175, 27 doi:10.3390/biology10030175 (međunarodna recenzija, članak, znanstveni)
-
31.Estimation of COVID-19 Epidemiology Curve of the United States Using Genetic Programming Algorithm // International journal of environmental research and public health, 18 (2021), 3; 959, 26 doi:10.3390/ijerph18030959 (međunarodna recenzija, članak, znanstveni)
-
32.Estimation of COVID-19 epidemic cruves using genetic programming algorithm // Health informatics journal, 27 (2021), 1; 1-40 doi:10.1177/1460458220976728 (međunarodna recenzija, članak, znanstveni)
-
33.Automatic Evaluation of the Lung Condition of COVID-19 Patients Using X-ray Images and Convolutional Neural Networks // Journal of personalized medicine, 11 (2021), 1; 28, 31 doi:10.3390/jpm11010028 (međunarodna recenzija, članak, znanstveni)
-
34.Use of Convolutional Neural Network for Fish Species Classification // Pomorski zbornik, 59 (2020), 1; 131-142 doi:18048/2020.59.08. (međunarodna recenzija, članak, znanstveni)
-
35.Estimation of gas turbine shaft torque and fuel flow of a CODLAG propulsion system using genetic programming algorithm // Pomorstvo : scientific journal of maritime research, 34 (2020), 2; 323-337 (međunarodna recenzija, članak, znanstveni)
-
36.Comparison of Power Distribution, Losses and Efficiencies of a Steam Turbine with and without Extractions // Tehnički glasnik - Technical journal, 14 (2020), 4; 480-487 doi:10.31803/tg-20200629122146 (međunarodna recenzija, prethodno priopćenje, znanstveni)
-
37.Improvement of Marine Steam Turbine Conventional E xergy Analysis by Neural Network Application // Journal of marine science and engineering, 8 (2020), 11; 884, 38 doi:10.3390/jmse8110884 (međunarodna recenzija, članak, znanstveni)
-
38.Impact of COVID-19 on Forecasting Stock Prices: An Integration of Stationary Wavelet Transform and Bidirectional Long Short-Term Memory // Complexity, 2020 (2020), 1846926, 12 doi:10.1155/2020/1846926 (međunarodna recenzija, članak, znanstveni)
-
39.Modeling the Spread of COVID-19 Infection Using a Multilayer Perceptron // Computational and mathematical methods in medicine, 2020 (2020), 5714714, 10 doi:10.1155/2020/5714714 (međunarodna recenzija, članak, znanstveni)
-
40.Energy Loss Analysis at the Gland Seals of a Marine Turbo-Generator Steam Turbine // Tehnički glasnik - Technical Journal, Vol. 14 (2020), No. 1; 19-26 doi:10.31803/tg-20191031094436 (međunarodna recenzija, članak, znanstveni)
-
41.Path planning optimization of six-degree-of- freedom robotic manipulators using evolutionary algorithms // International journal of advanced robotic systems, 17 (2020), 2; 1-16 doi:10.1177/1729881420908076 (međunarodna recenzija, članak, znanstveni)
-
42.Using multi-layer perceptron with Laplacian edge detector for bladder cancer diagnosis // Artificial Intelligence in Medicine, 102 (2020), 101746, 16 doi:10.1016/j.artmed.2019.101746 (međunarodna recenzija, članak, znanstveni)
-
43.Multilayer Perceptron approach to Condition- Based Maintenance of Marine CODLAG Propulsion System Components // Pomorstvo : scientific journal of maritime research, 33 (2020), 2; 181-190 doi:10.31217/p.33.2.8 (međunarodna recenzija, članak, znanstveni)
-
44.On the Traveling Salesman Problem in Nautical Environments: an Evolutionary Computing Approach to Optimization of Tourist Route Paths in Medulin, Croatia // Pomorski zbornik, 57 (2019), 1; 71-87 doi:10.18048/2019.57.05. (međunarodna recenzija, članak, znanstveni)
-
45.Analysis of Gas Turbine Operation before and after Major Maintenance // Pomorski zbornik, 57 (2019), 1; 57-70 doi:10.18048/2019.57.04. (međunarodna recenzija, članak, znanstveni)
-
46.Using multi-layer perceptron with Laplacian edge detector for bladder cancer diagnosis // Artificial intelligence in medicine, 102 (2019), 1-16 doi:10.1016/j.artmed.2019.101746 (međunarodna recenzija, članak, znanstveni)
-
47.Genetic Algorithm Approach to Design of Multi- Layer Perceptron for Combined Cycle Power Plant Electrical Power Output Estimation // Energies, 12 (2019), 22; 4352, 26 doi:10.3390/en12224352 (međunarodna recenzija, članak, znanstveni)
-
48.Marine Objects Recognition Using Convolutional Neural Networks // NAŠE MORE : znanstveno-stručni časopis za more i pomorstvo, 66 (2019), 3; 112-119 doi:10.17818/NM/2019/3.3 (međunarodna recenzija, članak, znanstveni)
-
49.Developing End-to-End Control Policies for Robotic Swarms Using Deep Q-learning // Journal of Advanced Computational Intelligence and Intelligent Informatics, 23 (2019), 5; 920-927 doi:10.20965/jaciii.2019.p0920 (međunarodna recenzija, članak, znanstveni)
-
50.Exergy analysis of marine steam turbine labyrinth (gland) seals // Pomorstvo : scientific journal of maritime research, 33 (2019), 1; 76-83 doi:10.31217/p.33.1.8 (međunarodna recenzija, članak, znanstveni)
-
51.NEMS Resonators for Detection of Chemical Warfare Agents Based on Graphene Sheet // Mathematical problems in engineering, 2019 (2019), 6451861, 23 doi:10.1155/2019/6451861 (međunarodna recenzija, članak, znanstveni)
-
52.Comparison of energy flow stream and isentropic method for steam turbine energy analysis // Acta Polytechnica, 59 (2019), 2; 109-125 doi:10.14311/AP.2019.59.0109 (međunarodna recenzija, članak, znanstveni)
-
53.Autonomous task allocation by artificial evolution for robotic swarms in complex tasks // Artificial Life and Robotics, 24 (2019), 1; 127-134 doi:10.1007/s10015-018-0466-6 (međunarodna recenzija, članak, znanstveni)
-
54.Implementation of Inductive Proximity Sensors in Active Magnetic Bearings // Tehnički vjesnik, 25 (2018), 6; 1638-1641 doi:10.17559/TV-20170515084609 (međunarodna recenzija, članak, znanstveni)
-
55.Magnetic Bearing Control System Based on PI and PID Controllers // Tehnički vjesnik, 25 (2018), 1; 136-140 doi:10.17559/TV-20160726112308 (domaća recenzija, članak, znanstveni)
-
56.MPI applications' performances in native vs. virtualized environments using InfiniBand IPoIB virtualization and live migration // Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 22 (2015), 6; 1495-1503 doi:10.17559/TV-20140819115232 (međunarodna recenzija, članak, znanstveni)
-
57.Scientific Applications in Cloud Computing // The IPSI BGD Transactions on Advanced Research, 10 (2014), 1; 27-33 (podatak o recenziji nije dostupan, članak, znanstveni)
-
58.Zinc-Polytetrafluoroethylene (Zn-PTFE) Composite Coating with Exploitable Tribological Properties // Journal of engineering technology, 30 (2013), 1; 30-36 doi:http://connection.ebscohost.com/c/articles/87688065/zinc-polytetrafluoroethylene-zn-ptfe-composite-coating-exploitable-tribological-properties (podatak o recenziji nije dostupan, članak, znanstveni)
-
59.Experimental Testing of Exchangeable Cutting Inserts Cutting Ability // Tehnicki Vjesnik-Technical Gazette, 20 (2013), 1; 21-26 (međunarodna recenzija, članak, znanstveni)
-
60.Cloud Solutions for High Performance Computing: Oxymoron or Realm? // Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 20 (2013), 1; 177-182 (podatak o recenziji nije dostupan, prethodno priopćenje, znanstveni)
-
61.An analysis of non-axisymmetric backward extrusion // Tehnicki Vjesnik-Technical Gazette, 19 (2012), 4; 953-957 doi:http://hrcak.srce.hr/index.php?show=clanak&id_clanak_jezik=137744 (međunarodna recenzija, članak, znanstveni)
-
62.Design and Planning of Clamping Work-holder Station for Sheet Metal Part of Car Body // Manufacturing and industrial engineering, 11 (2012), 2; 38-43 (podatak o recenziji nije dostupan, članak, znanstveni)
-
63.Possibilities to Measure Contact Friction in Bulk Metal Forming // Tehnicki Vjesnik-Technical Gazette, 19 (2012), 4; 727-734 doi:http://hrcak.srce.hr/index.php?show=clanak&id_clanak_jezik=137660 (međunarodna recenzija, članak, znanstveni)
-
64.Behaviour of X5 CrNiMo 17-12-2 Material During Deep Drawing Process // METALURGIJA, 51 (2012), 2; 203-206 (međunarodna recenzija, članak, znanstveni)
-
65.Upsetting of Bimetallic Components in Closed Die // Engineering review : znanstveni časopis za nove tehnologije u strojarstvu, brodogradnji i elektrotehnici, 31 (2011), 2; 105-109 (međunarodna recenzija, članak, znanstveni)
-
66.Comparative simulations of the heavy machining production system // Engineering review : znanstveni časopis za nove tehnologije u strojarstvu, brodogradnji i elektrotehnici, 31 (2011), 1; 1-11 (međunarodna recenzija, članak, znanstveni)
-
67.Accuracy Inspection of a Milling Machine with Ballbar System // CA systems in production process planning, 12 (2011), 1; 79-82 (podatak o recenziji nije dostupan, članak, znanstveni)
-
68.Emergent Synthesis Based Multi-Objective Design of the Manufacturing System Shop-Floor // Strojniški vestnik, 55 (2009), 9; 523-530 (međunarodna recenzija, članak, znanstveni)
-
69.Simulation and Modelling of Paths Processing Time in a Flexible Manufacturing System // Výrobné inžinierstvo, VIII (2009), 3; 40-45 (podatak o recenziji nije dostupan, članak, znanstveni)
-
70.Application of Multi-Agent Technology and Heterarhical Architecture for Production Scheduling // Engineering review : znanstveni Časopis za nove tehnologije u strojarstvu, brodogradnji i elektrotehnici, 29 (2009), 1; 1-10 (podatak o recenziji nije dostupan, članak, znanstveni)
-
71.GA Based CNC Turning Center Exploitation Process Parameters Optimization // Metalurgija, 48 (2009), 1; 47-50 (podatak o recenziji nije dostupan, prethodno priopćenje, znanstveni)
-
72.Investigation of Forming Force at Backward Extrusion Process on Different Aluminum Materials // Scientific Bulletin. Serie C, Fascicle Mechanics, Tribology, Machine Manufacturing Technology, XXII (2008), 1; 21-27 (podatak o recenziji nije dostupan, članak, znanstveni)
-
73.A Numerical Approach to the Establishment of a Sheet Metal Forming Process Technology // Annals of University of Petroşani. Mechanical Engineering, 10 (2008), 1; 11-22 (podatak o recenziji nije dostupan, članak, znanstveni)
-
74.New Trends in Intelligent Manufacturing // Engineering review : znanstveni casopis za nove tehnologije u strojarstvu, brodogradnji i elektrotehnici, 28 (2008), 2; 91-100 (podatak o recenziji nije dostupan, članak, znanstveni)
-
75.Analysis of different modeling approach at determining of backward extrusion force on AlCu5PbBi material // Metalurgija, 47 (2008), 4; 313-316 (međunarodna recenzija, članak, znanstveni)
-
76.Evolutionary approach for solving cell-formation problem in cell manufacturing // Advanced Engineering Informatics, 20 (2006), 3; 227-232 (međunarodna recenzija, članak, znanstveni)
-
77.Strain Energy Approach In Stamping Process Design // Journal of Manufacturing Engineering, 4 (2005), 1; 79-81 (podatak o recenziji nije dostupan, članak, znanstveni)
-
78.Numerical Simulation of Tinplate Rings Forming // Manufacturing Engineering, III (2005), 3; 39-42 (podatak o recenziji nije dostupan, članak, znanstveni)
-
79.Reconfiguration of Manufacturing Systems Based on Virtual BMS // CIRP Journal of Manufacturing Systems, 33 (2004), 1; 15-24 (podatak o recenziji nije dostupan, članak, znanstveni)
-
80.Stochastic and Genetic Algorithm Comparison for Production Scheduling in a Flexible Manufacturing System // Engineering Review, 23 (2003), 31-44 (podatak o recenziji nije dostupan, članak, znanstveni)
-
1.Artificial intelligence approach towards assessment of condition of COVID-19 patients - Identification of predictive biomarkers associated with severity of clinical condition and disease progression // Computers in biology and medicine, 138 (2021), 104869, 11 doi:10.1016/j.compbiomed.2021.104869 (međunarodna recenzija, članak, ostalo)
-
2.Utilization of multilayer perceptron for determining the inverse kinematics of an industrial robotic manipulator // International Journal of Advanced Robotic Systems, 2021 (2021), July-August; 1-11 doi:10.1177/1729881420925283 (međunarodna recenzija, članak, ostalo)
-
3.Intelligent Automation System for Vessels Recognition: Comparison of SIFT and SURF Methods // Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 28 (2021), 4; 1221-1226 doi:10.17559/TV-20200522115821 (međunarodna recenzija, članak, ostalo)
-
4.Neural Network-Based Model for Classification of Faults During Operation of a Robotic Manipulator // Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 28 (2021), 4; 1380-1387 (međunarodna recenzija, prethodno priopćenje, ostalo)
-
5.Comparison Of Three Artificial Intelligence Algorithms For Sepsis Prediction // World of Health, 3 (2020), 20-25 (domaća recenzija, članak, ostalo)
-
6.Dataset Size-Based Approach In Design Of Artificial Neural Network For Breast Cancer Diagnosis // World of Health, 3 (2020), 13-19 (domaća recenzija, članak, ostalo)
-
7.Use of Artificial Neural Network for Estimation of Propeller Torque Values in a CODLAG Propulsion System // Pomorski zbornik - Journal of Maritime and Transportation Sciences, 58 (2020), 1; 25-3/ doi:10.18048/2020.58.02. (međunarodna recenzija, prethodno priopćenje, ostalo)
-
8.Frigate Speed Estimation Using CODLAG Propulsion System Parameters and Multilayer Perceptron Procjena brzine fregate pomoću parametara CODLAG pogonskog sustava i višeslojnog perceptrona // Naše more : znanstveni časopis za more i pomorstvo, 67 (2020), 2; 117-125 doi:10.17818/NM/2020/2.4 (međunarodna recenzija, prethodno priopćenje, ostalo)
-
9.Multy Objective Evolutionary Based Scheduling // Jourrnal Manufacturing Engineering, 7 (2008), 2; 47-51 (podatak o recenziji nije dostupan, izvorni znanstveni rad, znanstveni)
-
10.Analysis of Digitizing and Traditional Measuring System at Surface Measurement of Lids // Key Engineering Materials, 381-382 (2008), 217-221 (podatak o recenziji nije dostupan, izvorni znanstveni rad, znanstveni)
-
1.Material Classification of Underground Objects From GPR Recordings Using Deep Learning Approach // The Second Serbian International Conference on Applied Artificial Intelligence (SICAAI) - Book of Abstracts / Filipović, Nenad (ur.).
Kragujevac: University of Kragujevac, Serbia, 2023. str. /-/ (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
2.On Differentiating Synthetic and Real Data in Medical Applications // The Second Serbian International Conference on Applied Artificial Intelligence (SICAAI) - Book of Abstracts / Filipović, Nenad (ur.).
Kragujevac: University of Kragujevac, 2023. 61, 4 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
3.Determining normalized friction torque of an industrial robotic manipulator using the symbolic regression method // XVI International Conference for Young Researchers "Technical Sciences. Industrial Management 2023" - PROCEEDINGS / Angelov, Cyril (ur.).
Sofija: Scientific technical union of mechanical engineering “Industry - 4.0”, 2023. str. 5-8 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
4.Determining the Influence of Hardware on the Execution Times of Trained Machine Learning Models // RI-STEM-2022
Rijeka, 2022. str. 88-90 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
5.Country-level factor influence on COVID-19 excess mortality rates determined using Random Forest algorithm // Ri-STEM-2022 - proceedings / Baressi Šegota, Sandi ; Lorencin, Ivan ; Anđelić, Nikola ; Car, Zlatan (ur.).
Rijeka: Studentski zbor Sveučilišta u Rijeci ; Tehnički fakultet Rijeka ; Riteh AI and Robotics Group, 2022. str. 16-18 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
6.Mathematical modeling of COVID-19 spread using genetic programming algorithm // 1st Serbian International Conference on Applied Artificial Intelligence (SICAAI) - book of abstracts / Filipović, Nenad (ur.).
Kragujevac: Univerzitet u Kragujevcu, 2022. 41, 4 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
7.COVID-19 disease severity prediction model based on blood biomarkers: a machine learning approach // 1st Serbian International Conference on Applied Artificial Intelligence (SICAAI) - book of abstracts / Filipović, Nenad (ur.).
Kragujevac: Univerzitet u Kragujevcu, 2022. 67, 4 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
8.Comparison of Image Augmentation Techniques in Urinary Bladder Cancer Diagnostics // 1st Serbian International Conference on Applied Artificial Intelligence (SICAAI) / - (ur.).
Kragujevac: Sveučilište u Kragujevcu, 2022. str. 1-8 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
9.Analysis of COVID-19 disease using machine learning - personalized model // 1st Serbian International Conference on Applied Artificial Intelligence (SICAAI) - book of abstracts / Filipović, Nenad (ur.).
Kragujevac: Univerzitet u Kragujevcu, 2022. 25, 4 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
10.ENERGY ANALYSIS OF A GAS TURBINE UPGRADED WITH HEAT REGENERATOR // Technological forum 2021 Proceedings / Suchánek, Jan ; Kreibich, Viktor (ur.).
Prag, 2021. str. 198-205 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
11.Thermodynamic analysis of steam turbines from geothermal double flash power system // Technological forum 2021 Proceedings / Suchánek, Jan ; Kreibich, Viktor (ur.).
Prag, 2021. str. 229-236 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
12.Automated Grading of Oral Squamous Cell Carcinoma into Multiple Classes Using Deep Learning Methods // The 21st IEEE International Conference on BioInformatics and BioEngineering / Filipović, Nenad (ur.).
Kragujevac: Institute of Electrical and Electronics Engineers (IEEE), 2021. T.1A.2, 6 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
13.APPLICATION OF ARTIFICIAL INTELLIGENCE-BASED IMAGE ANALYSIS IN BIOINFORMATICS // Book of proceedings 1st International Conference on Chemo and BioInformatics (ICCBIKG 2021) / Zoran Marković, Nenad Filipović (ur.).
Kragujevac: Institute for Information Technologies, University of Kragujevac, 2021. str. 47-54 (plenarno, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
14.Semantic segmentation of oral squamous cell carcinoma on epithellial and stromal tissue // Book of proceedings 1st International Conference on Chemo and BioInformatics (ICCBIKG 2021) / Zoran Marković, Nenad Filipović (ur.).
Kragujevac: Institute for Information Technologies, University of Kragujevac, 2021. str. 194-197 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
15.Multiclass Classification of Oral Squamous Cell Carcinoma // Proceedings of the International Scientific Student Conference RI-STEM-2021 / Lorencin, Ivan ; Baressi Šegota, Sandi (ur.).
Rijeka, 2021. str. 7-11 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
16.Z4 HPC Cluster // Ri-STEM-2021 Preceedings / Lorencin, Ivan ; Baressi Šegota, Sandi ; Car, Zlatan (ur.).
Rijeka, 2021. str. 51-56 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
17.Dual-flow dissymmetrical low pressure steam turbine energy analysis – comparison of both turbine cylinders // V INTERNATIONAL SCIENTIFIC CONFERENCE "INDUSTRY 4.0" - PROCEEDINGS 2020 - VOLUME 3 (DOMINANT TECHNOLOGIES IN “INDUSTRY 4.0”) / Popov, Georgi ; Ovtcharova, Jivka (ur.).
Sofija: Scientific technical union of mechanical engineering “Industry - 4.0”, 2020. str. 119-122 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
18.Friction modeling of robot manipulator joints // Proceedings of International Conference on Innovative Technologies IN-TECH 2019 / Car, Zlatan ; Kudláček, Jan (ur.).
Rijeka: Faculty of Engineering, University of Rijeka, 2019. str. 9-12 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
19.NEMS RESONATOR FOR DETECTION OF CHEMICAL WARFARE AGENTS BASED ON SINGLE LAYER GRAPHENE SHEET // Proceedings of International Conference on Innovative Technologies IN-TECH 2019 / Car, Zlatan ; Kudláček, Jan (ur.).
Rijeka: Faculty of Engineering, University of Rijeka, 2019. str. 5-8 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
20.Comparison of edge detectors for urinary bladder cancer diagnostic // Proceedings of International Conference on Innovative Technologies IN-TECH 2019 / Car, Zlatan ; Kudláček, Jan (ur.).
Rijeka: Faculty of Engineering, University of Rijeka, 2019. str. 13-16 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
21.Analysis of two methods for steam turbine developed power calculation in Industry 4.0 // 10th International Technical Conference - Technological Forum 2019 - Proceedings / Kudláček, Jan (ur.).
Prag: Czech technical university in Prague, 2019. str. 103-110 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
22.Estimation of combined cycle power plant power output using multilayer perceptron variations // 10th International Technical Conference - Technological Forum 2019 - Proceedings / Kudláček, Jan (ur.).
Prag: Czech technical university in Prague, 2019. str. 94-98 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
23.NEMS rezonator za detekciju kemijskog oružja za masovno uništenje temeljen na dvoslojnom grafenu // Hrvatsko Društvo za Mehaniku / Skozrit, Ivica ; Tonković, Zdenko ; Karšaj, Igor ; Lesičar, Tomislav (ur.).
Zagreb, 2019. str. 1-6 (predavanje, domaća recenzija, cjeloviti rad (in extenso), znanstveni) -
24.ARTIFICIAL INTELLIGENCE-BASED METHOD FOR URINARY BLADDER CANCER DIAGNOSTIC // Internarional Conference on Inovative Technologies (IN-TECH 2018) / Car, Zlatan ; Kudláček, Jan (ur.).
Zagreb: Faculty of Engineering, University of Rijeka, 2018. str. 51-53 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
25.SEPSIS PREDICTION USING ARTIFICIAL INTELLIGENCE ALGORITHMS // Internarional Conference on Inovative Technologies (IN-TECH 2018) / Car, Zlatan ; Kudláček, Jan (ur.).
Zagreb: Faculty of Engineering, University of Rijeka, 2018. str. 47-50 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
26.TRAJECTORY PLANNING USING GENETIC ALGORITHM FOR THREE JOINTS ROBOT MANIPULATOR // Internarional Conference on Inovative Technologies (IN-TECH 2018) / Car, Zlatan ; Kudláček, Jan (ur.).
Jaromer: Faculty of Engineering, University of Rijeka, 2018. str. 25-27 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
27.EXHAUST GAS EMISSIONS FROM TURBOCHARGED DIRECT INJECTION DIESEL ENGINE DURING THE FUEL MASS FLOW VARIATION // Proceedings of International Conference on Innovative Technologies, IN-TECH 2018 / Car, Zlatan ; Kudláček, Jan (ur.).
Zagreb: Faculty of Engineering, University of Rijeka, 2018. str. 35-38 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
28.ANTISTATIC WATER-SOLUBLE PAINTS // International Conference on Innovative Technologies, IN-TECH 2017 / Pepelnjak, Tomaž ; Car, Zlatan ; Kudláček, Jan (ur.).
Ljubljana, 2017. str. 271-274 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
29.MODIFIED GENETIC ALGORITHM IN CHABOCHE MODEL PARAMETERS IDENTIFICATION // International Conference on Innovative Technologies, IN-TECH 2017 / Pepelnjak, Tomaž ; Car, Zlatan ; Kudláček, Jan (ur.).
Ljubljana, 2017. str. 85-88 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
30.COMBINATION OF CONTACT AND OPTICAL 3D DIGITIZING METHODS FOR THEIR APPLICATION IN REVERSE ENGINEERING // International Conference on Innovative Technologies, IN-TECH 2017 / Pepelnjak, Tomaž ; Car, Zlatan ; Kudláček, Jan (ur.).
Ljubljana: Jaromer, Czech Republic : Faculty of Engineering, University of Rijeka, 2017. str. 65-68 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
31.In silico testing of the toxicity for some anticancer herbal compounds // Proceedings of International Conference on Innovative Technologies / Pepelnjak Tomaž ; Car Zlatan ; Kudláček Jan (ur.).
Jaromer: Faculty of Engineering, University of Rijeka, 2017. str. 217-220 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
32.Determination of Natural Vibrations of Simply Supported Single Layer Graphene Sheet using Non-Local Kirchhoff Plate Theory // Proceedings of International Conference on Innovative Technologies / Pepelnjak Tomaž ; Car Zlatan ; Kudláček Jan (ur.).
Jaromer: Faculty of Engineering, University of Rijeka, 2017. str. 33-36 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
33.Research of Unstable Behavior of Iterative Path Planning Algorithm for Robot Manipulator // Proceedings of International Conference on Innovative Technologies / Pepelnjak Tomaž ; Car Zlatan ; Kudláček Jan (ur.).
Jaromer: Faculty of Engineering, University of Rijeka, 2017. str. 57-60 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
34.Running HPC applications on many million cores Cloud // MIPRO 2017 40th International Convention Proceedings / Skala, Karolj ; Trobec, Roman (ur.).
Opatija: Hrvatska udruga za informacijsku i komunikacijsku tehnologiju, elektroniku i mikroelektroniku - MIPRO, 2017. str. 226-231 doi:10.23919/MIPRO.2017.7973420 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
35.Study of influence of geometry, rotational speed and heat generated by wood cutting on vibrations of circular saw blade // International Conference on Innovative Technologies IN-TECH 2016 / Car, Zlatan ; Kudláček, Jan (ur.).
Prag: Tehnički fakultet Sveučilišta u Rijeci, 2016. str. 105-109 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
36.Modification on active magnetic bearings test-rig for implementing different control algorithms // Proceedings of International Conference on Innovative Technologies / Car, Zlatan ; Kudláček, Jan (ur.).
Prag: Tehnički fakultet Sveučilišta u Rijeci, 2016. str. 89-92 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
37.OVERVIEW OF AN OPEN SOURCE SOLUTION FOR FINITE ELEMENT METHOD ELECTROMAGNETIC SIMULATIONS // Proceedings of International Conference on Innovative Technologies, IN-TECH 2015,
Dubrovnik, Hrvatska, 2015. str. 128-142 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
38.THEORY AND SIMULATION OF INDUCTION MACHINE BRAKING USING THE HIGH SLIP BRAKING METHOD // Proceedings of International Conference on Innovative Technologies, IN-TECH 2015
Dubrovnik, Hrvatska, 2015. str. 128-142 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
39.A Compressive Sensing Based Method for Cross-Terms Suppression in the Time-Frequency Plane // Bioinformatics and Bioengineering (BIBE), 2015 IEEE 15th International Conference on
Beograd, Srbija, 2015. str. 383-386 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
40.Analysis of Corkscrew Electrode Failure Origins // Proceedings of International Conference on Innovative Technologies (IN-TECH 2015)
Dubrovnik, Hrvatska, 2015. (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
41.Optimizing the Reference Signal in the Cross Wigner-ville Distribution Based Instantaneous Frequency Estimation Method // Procedia Engineering / Katalinic, Branko (ur.).
Beč: Elsevier, 2015. str. 1657-1664 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
42.Accelerators on parallel roads to exascale computing // Proceedings of International Conference on I nnovative Technologies / Zlatan Car, Jan Kudláček, João Rafael (ur.).
Prag: Tehnički fakultet Sveučilišta u Rijeci, 2014. str. 333-337 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
43.The development, implementation and comparison of models of industrial robot using Modelica modeling language // Proceedings of International Conference on Innovative Technologies / Zlatan Car, Jan Kudláček, João Rafael (ur.).
Prag: Tehnički fakultet Sveučilišta u Rijeci, 2014. str. 329-333 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
44.Doing Science in the Cloud // International Conference on Innovative Technologies IN-TECH / Car, Zlatan ; Kudláček, Jan ; Szalay, Tibor (ur.).
Rijeka: Tehnički fakultet Sveučilišta u Rijeci, 2013. str. 385-388 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
45.A Fast Genetic Algorithm Based on Single Gene Evaluation Fitness Mechanism for Job-Shop Scheduling Problem // International Conference on Innovative Technologies IN-TECH / Car, Zlatan ; Kudláček, Jan ; Szalay, Tibor (ur.).
Rijeka: Tehnički fakultet Sveučilišta u Rijeci, 2013. str. 345-348 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
46.Orbital Forging of Cross Joint Component // International Conference on Innovative Technologies IN-TECH / Car, Zlatan ; Kudláček, Jan ; Szalay, Tibor (ur.).
Rijeka: Tehnički fakultet Sveučilišta u Rijeci, 2013. str. 265-268 (pozvano predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
47.The New Wear-Resistant Coating Systems Containing Carbon Nanotubes // International Conference on Innovative Technologies IN-TECH / Car, Zlatan ; Kudláček, Jan ; Szalay, Tibor (ur.).
Rijeka: Tehnički fakultet Sveučilišta u Rijeci, 2013. str. 173-176 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
48.Analyzing Anomalies of Injection Tooling Mold Design // International Conference on Innovative Technologies IN-TECH / Car, Zlatan ; Kudláček, Jan ; Szalay, Tibor (ur.).
Rijeka: Tehnički fakultet Sveučilišta u Rijeci, 2013. str. 425-428 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
49.Finite Analysis of Deep Drawing Tool Geometry for Thin Walled Tin Can // International Conference on Innovative Technologies IN-TECH / Car, Zlatan ; Kudláček, Jan ; Szalay, Tibor (ur.).
Rijeka: Tehnički fakultet Sveučilišta u Rijeci, 2013. str. 401-404 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
50.Investigation of Dry and Combined Method Used for Measurement and Maintenance Control of Liquid Storage Tank Capacity // Proceedings PLIN2012 / Raos, Pero (ur.).
Slavonski Brod: Strojarski fakultet Sveučilišta u Slavonskom Brodu, 2012. str. 5-1 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
51.Automatic Measurement of Rotational Speeds and Lathe Maintenance // Annals of DAAAM for 2012. & Proceedings of the 23rd International DAAAM Symposium / Katalinic, Branko (ur.).
Beč: DAAAM International Vienna, 2012. str. 775-778 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
52.Forward Extrusion of Bi-metallic Components // Proceedings of 4th International Scientific and Expert Conference of the International TEAM Society / Marija Živić ; Tomislav Galeta (ur.).
Osijek: Mechanical Engineering Faculty in Slavonski Brod, Josip Juraj Strossmayer University of Osijek and International TEAM Society, 2012, 2012. str. 125-128 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
53.Investigation of Single Point Incremental Forming Process Applied on Thin Sheet Metal // International Conference on Innovative Technologies IN-TECH / Car, Zlatan ; Kudláček, Jan ; Pepelnjak, Tomaž ; (ur.).
Rijeka: Tehnički fakultet Sveučilišta u Rijeci, 2012. str. 583-586 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
54.Mathematical Modelling of Surface Grease Deposits // International Conference on Innovative Technologies IN-TECH / Car, Zlatan ; Kudláček, Jan ; Pepelnjak, Tomaž ; (ur.).
Rijeka: Tehnički fakultet Sveučilišta u Rijeci, 2012. str. 335-338 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
55.Introduction of New Surface Treatment Technologies Into Practice - Zinc Based Composite Coating with PTFE Particles (Zn-PTFE Coating) // International Conference on Innovative Technologies IN-TECH / Car, Zlatan ; Kudláček, Jan ; Pepelnjak, Tomaž ; (ur.).
Rijeka: Tehnički fakultet Sveučilišta u Rijeci, 2012. str. 339-342 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
56.Investigation of Coatings Friction Coefficient Used in Production of Deep Drawn Packaging Cans // International Conference on Innovative Technologies IN-TECH / Car, Zlatan ; Kudláček, Jan ; Pepelnjak, Tomaž ; (ur.).
Rijeka: Tehnički fakultet Sveučilišta u Rijeci, 2012. str. 443-446 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
57.BI-Metallic Cold Backward Extrusion – Numerical Simulation with Experimental Verification // International Conference on Innovative Technologies IN-TECH / Car, Zlatan ; Kudláček, Jan ; Pepelnjak, Tomaž ; (ur.).
Rijeka: Tehnički fakultet Sveučilišta u Rijeci, 2012. str. 417-420 (pozvano predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
58.DSP-based control system for excitation control of synchronous generator // Proceedings of International Conference on Innovative Technologies IN-TECH / Zlatan Car, Jan Kudláček, Tomaž Pepelnjak (ur.).
Rijeka: Tehnički fakultet Sveučilišta u Rijeci, 2012. str. 567-570 (pozvano predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
59.Thin Metal Material TH 415 Composition Testing // 13th International Scientific Conference Automation in Production Planning and Manufacturing / Kuric, Ivan (ur.).
Žilina: Scientific and Technical Society at the University of Žilina, 2012. str. 133-139 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
60.Concept for online web machine tool control based on open source // Proceedings of 8th International Conference of DAAAM Baltic INDUSTRIAL ENGINEERING / Otto, T. (ur.).
Talin: Tallinn University of Technology, 2012. str. 216-221 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
61.Vehicle Beam Light Assistant System // Annals of DAAAM for 2011 & PROCEEDINGS of the 22nd International DAAAM Symposium / Katalinić, Branko (ur.).
Beč: DAAAM International Vienna, 2011. str. 1653-1654 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
62.Flatness of Mechanical Interface of Housing Filter: Comparing Methods // Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAM Symposium / Katalinić, Branko (ur.).
Beč: DAAAM International Vienna, 2011. str. 1381-1382 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
63.Suitable Devices for Measuring Roughness on Oil Filter Housing // Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAM Symposium / Katalinić, Branko (ur.).
Beč: DAAAM International Vienna, 2011. str. 1351-1352 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
64.Radioscopic measurement on fuel filter support: inspection for health of material // Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAM Symposium / Katalinić, Branko (ur.).
Beč: DAAAM International Vienna, 2011. str. 1359-1360 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
65.Digitizing system ATOS - measuring turbo compressor housing // Annals of DAAAM for 2011 & Procedingd of the 22nd International DAAAM Symposium / Katalinić, Branko (ur.).
Beč: DAAAM International Vienna, 2011. str. 1367-1368 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
66.Simulation of Product Logistic, Investigation of Facility Layout Capabilities // International Conference on Innovative Technologies IN-TECH / Kudlaček, Jan ; Car, Zlatan ; Barišić, Branimir ; Pepelnjak, Tomaž ; Pakosta, Michal ; Kršulja, Marko (ur.).
Prag: Tisk AS Jaroměř, 2011. str. 759-761 (pozvano predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
67.The Tribological Properties of Zn-PTFE Composite Coating // International Conference on Innovative Technologies IN-TECH / Kudlaček, Jan ; Car, Zlatan ; Barišić, Branimir ; Pepelnjak, Tomaž ; Pakosta, Michal ; Kršulja, Marko (ur.).
Prag: Tisk AS Jaroměř, 2011. str. 142-146 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
68.Considerations on the use of Ballbar System in Accuracy Assessment of the Triaxial CNC Machine Tool // International Conference on Innovative Technologies IN-TECH / Kudlaček, Jan ; Car, Zlatan ; Barišić, Branimir ; Pepelnjak, Tomaž ; Pakosta, Michal ; Kršulja, Marko (ur.).
Prag: Tisk AS Jaroměř, 2011. str. 762-764 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
69.Comparison in Production Planning of the Classical Method and RL Advanced Algorithms // Proceedings of International Conference on Innovative Technologies IN-TECH / Kudlaček, Jan ; Car, Zlatan ; Barišić, Branimir ; Pepelnjak, Tomaž ; Pakosta, Michal ; Kršulja, Marko (ur.).
Prag: Tisk AS Jaroměř, 2011. str. 778-780 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
70.Measurements Data Analysis and Defect Classification Using NN // Proceedings of International Conference on Innovative Technologies IN-TECH / Kudlaček, Jan ; Car, Zlatan ; Barišić, Branimir ; Pepelnjak, Tomaž ; Pakosta, Michal ; Kršulja, Marko (ur.).
Prag: Tisk AS Jaroměř, 2011. str. 770-772 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
71.Introduction of Scientific Cloud Concept for Industry Application // 14th Asia Pacific Symposium on Intelligent and Evolutionary Systems : proceedings / Ohkura, Kazuhiro (ur.).
Hiroshima: Hiroshima University, 2010. str. 213-220 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
72.Analysis of Nonhomogeneous Yielding by Means of Different Intelligent System Based on Stochastic and Finite Element Method // Proceeding of The 14th Asia Pacific Symposium on Intelligent and Evolutionary Systems / Ohkura, Kazuhiro (ur.).
Hiroshima: Hiroshima University, 2010. str. 326-334 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
73.Creating Virtual Models of Production Equipment For Simulation of a Manufacturing Process System // 10th International Scientific Conference, Automation in Production Planning and Manufacturing / Kuric, Ivan (ur.).
Žilina: University of Žilina, Faculty of Mechanical Engineering, 2009. str. 38-44 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
74.Considerations and Use of the Genetic Algorithm in Optimization of Standard Fixture Components // The 19th International DAAAM SYMPOSIUM "Intelligent Manufacturing & Automation: Focus on Next Generation of Intelligent Systems and Solutions" / Katalinić, Branko (ur.).
Beč: DAAAM International Vienna, 2008. str. 731-732 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
75.GA Based Design and Production Planing // Proceedings of the 9th International Scientific Conference ” New Ways in Manufacturing Technologies” / Karol Vasilko (ur.).
Prešov: Technical University Kosiciach, 2008. str. 15-19 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
76.Evolutionary Based Production Planning // Proceedings of 9th International Scientific Conference "Automation in Production Planning and Manufacturing" / Ivan Kuric (ur.).
Žilina: University of Zilina, 2008. str. 252-258 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
77.Evaluation of Different Analytic Models Accuracy at Backward Extrusion Force on AlCu5PbBi // Proceedings of the 12th International Conference On Tools ICT-2007 / Dudas Illes, Szabo Otto, Varga Gyula (ur.).
Miskolc: Department of Production Engineering-University of Miskolc, 2007. str. 287-293 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
78.Machining Center Efficiency Optimization Using Artificial Intelligence // Annals of DAAAM for 2007 & Proceedings of the 18th International DAAAM Symposium / B. Katalinic (ur.).
Beč: DAAAM International Vienna, 2007. str. 132-133 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
79.Numerical Strategy for Ust 13 Sheet Metal DVD Holder Production // 6th International Conference on Industrial Tools and Materials Processing Technologies / Kuzman, Karl (ur.).
Celje: TECOS, 2007. str. 337-343 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
80.MES System Data Acquisition in Rolling Mill Plant Automation // Proceedings of the 5th DAAAM International Conference on Advanced Technologies for Developing Countries / Mikac, T. ; Katalinić, B (ur.).
Rijeka: University of Rijeka-Faculty of Engineering, 2006. str. 287-290 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
81.3D Measurements And Analysis Of Measuring Results For The Optical Eyepiece Holder // TPP 2006-Technological Process Planning / Legutko, S (ur.).
Poznań: Comitee of the Mechanical Engineering, Polish Academy of Science-Division Poznan, 2006. str. 111-117 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
82.Modern Organizational Concepts and Methods of Production Management // Proceedings of the 5th DAAAM International Conference on Advanced Technologies for Developing Countries : ATDC 2006 / Mikac, Tonči ; Katalinić, Branko (ur.).
Rijeka : Beč: University of Rijeka, Faculty of Engineering ; DAAAM, 2006. str. 291-297 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
83.Preliminary GA Based Optimization In Process Of Jig Design For Milling Processes // Proceedings of the 17th International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Mechatronics & Robotics" / Katalinic, B. (ur.).
Beč: DAAAM International Vienna, 2006. str. 029-030 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
84.Optimization Of Tool Motion On A 2-Dimensional Surface By Means Of The Genetic Algorithm // Proceedings of the 5th International DAAAM Conference Advanced Technologies for Developing Countries-ATDC 2006 / Mikac, T. ; Katalinić, B (ur.).
Rijeka: University of Rijeka-Faculty of Engineering, DAAAM International Vienna, 2006. str. 159-164 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
85.Stochastic Algorithm Application In Project Management For Limited Series Production // Proceedings of the 5th International DAAAM Conference "Advanced Technologies for Developing Countries" (ATDC 2006) / Mikac, T. ; Katalinić, Branko (ur.).
Rijeka: University of Rijeka, Faculty of Engineering, 2006. str. 281-286 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
86.New Method of Choosing the Optimal Organization Structure // Proceedings of 6th International Workshop on Emergent Synthesis : IWES ´06 / Ueda, Kanji (ur.).
Tokyo: University of Tokyo Press, 2006. str. 25-34 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
87.Modeling And Simulation Of Tinplate Container Lids Stamping Process // Trends in the Development of Machinery and Associated Technology / Ekinović, S. ; Vivancos, J. ; Yalcin, S. (ur.).
Barcelona : Lloret de Mar: Escola Tecnica Superior D Enginyeria Industrial de Barcelona ; Faculty of Mechanical Engineering in Zenica ; Bahcesehir University Istanbul, 2006. str. 173-176 (poster, cjeloviti rad (in extenso), znanstveni) -
88.Utilization of GA for Optimization of Tool Path on a 2D Surface // Proceedings of the 6th International Workshop on Emergent Synthesis / Ueda, Kanji (ur.).
Tokyo: University of Tokyo Press, 2006. str. 231-236 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
89.Multi-Agent Manufacturing System Design Based on Emergent Synthesis Approach // AMST'05 Advanced Manufacturing Systems and Technology: Proceedings of the Seventh International Conference / Kuljanić, Elso (ur.).
Udine: Springer, 2005. str. 307-316 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
90.Computer Simulation of Hollow Tinplate Part Manufacturing // Proceedings of 6th International Scientific-Technical Conference Automation and CA Systems in Technology Planning and in Manufacturing / Novak-Marcincin, Josef (ur.).
Herl'any: TU Košice, 2005. str. 16-20 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
91.Evolutionary approach for solving cell formation problem IN CELL MANUFACTURING // Proceedings of the 5th International Workshop on Emergent Synthesis / Ueda, Kanji ; Monostori, Laslo ; Markus, Andreas (ur.).
Budimpešta: Computer and Automation Research Institute (SZTAKI), 2004. str. 79-84 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
92.Emergent Synthesis based model for adaptable reconfiguration of the Manufacturing System Shop-floor // Proceedings of 7th International Conference New ways in manufacturing technologies 2004 / Vasilko, Karol (ur.).
Prešov: TU Košice, 2004. str. 449-454 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
93.Multi-objective design and online adaptable reconfiguration of the manufacturing system shop-floor // Proceedings of 4th International Congress Mechanical Engineering Technologies '04 / Sabotinov, Nikola (ur.).
Varna: Scientific-Technical Union of Mechanical Engineering, 2004. str. 126-129 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
94.Utilization of modified genetic algorithm for solving classical job shop scheduling problem // Annals & Proceedings of 15th DAAAM International Symposium / Katalinić, Branko (ur.).
Beč: DAAAM International Vienna, 2004. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
95.Multi-objective Design and Adaptable Reconfiguration of the Manufacturing System Shop-floor // Progres in Virtual Manufacturing Systems, Proceedings of The 36th CIRP International Seminar on Manufacturing Systems / Prof. Dr.-Ing. Helmut Bley (ur.).
Saarbrücken: Published by CIRP ISMS, 2003. str. 493-500 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
1.Utilization of Convolutional Neural Networks for Urinary Bladder Cancer Diagnosis Recognition From CT Imagery // 2021 IEEE 21st International Conference on Bioinformatics and Bioengineering (BIBE)
Kragujevac: Institute of Electrical and Electronics Engineers (IEEE), 2021. str. 1-6 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), ostalo) -
2.Preparation of Simplified Molecular Input Line Entry System Notation Datasets for use in Convolutional Neural Networks // The 21st IEEE International Conference on BioInformatics and BioEngineering / Nenad Filipović (ur.).
Kragujevac: Institute of Electrical and Electronics Engineers (IEEE), 2021. Paper ID #1 44, 6 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), ostalo) -
3.Determining Inverse Kinematics of a Serial Robotic Manipulator Through the Use of Genetic Programming Algorithm // 8th International Congress of Serbian Society of Mechanics
Kragujevac, 2021. str. 1-6 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), ostalo) -
4.A Brief Note on the Influence of Storage Choices on Machine Learning Algorithm Training Times // Ri-STEM-2021 Proceedings / Lorencin, Ivan ; Baressi Šegota, Sandi ; Car, Zlatan (ur.).
Rijeka, 2021. str. 19-25 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), ostalo)
