Pregled po CROSBI profilu: Franjo Cajner (CROSBI Profil: 20110, MBZ: 76181)
Pronađeno 195 radova
-
1.Landek, Darko; Jakovljević, Suzana; Kovačić, Saša; Cajner, FranjoWear resistance of PVD TiAlN coating applied on high-speed steel S390 MC // 24th IFHTSE CONGRESS 2017 European Conference on Heat Treatment and Surface Engineering / Jacky LESAGE (ur.).
Nica: Association de Traitement Thermique et de Traitement de Surface, 2017. (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
2.Kovačić, Saša; Landek, Darko; Cajner, FranjoApplication of PACVD gradient multilayer TiCN coating: from laboratory tests to industrial trials // 24th IFHTSE CONGRESS 2017 - European Conference on Heat Treatment and Surface Engineering - A3TS CONGRESS / Jacky LESAGE (ur.).
Nica: Association de Traitement Thermique et de Traitement de Surface, 2017. (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
3.Landek, Darko; Cajner, Franjo; Kovačić, SašaWear Resistance of the Multilayer TiN/Ti(B, N) Coating Deposited on Cold Work Tool Steels // Materials performance and characterization, 6 (2017), 5; 1-11 doi:10.1520/MPC20170015 (podatak o recenziji nije dostupan, članak, znanstveni)
-
4.Kovačić, Saša; Cajner, Franjo; Landek, DarkoInfluence of Steel Substrate on the Properties of PACVD Gradient Multilayer TiCN Coating // Materials performance and characterization, 6 (2017), 5; 1-11 doi:10.1520/MPC20170013 (podatak o recenziji nije dostupan, članak, znanstveni)
-
5.Second Annual PhD Workshop, Zagreb, July 1, 2016. : PhD study of mechanical engineering, naval architecture, aeronautical engineering and metallurgical engineering : book of abstracts / Parunov, Joško ; Zovko Brodarac, Zdenka ; Duić, Neven ; Lulić, Zoran ; Đukić, Goran ; Cajner, Franjo ; Runje, Biserka ; Terze, Zdravko ; Jokić, Andrej ; Bauer, Branko ; Sorić, Jurica ; Matijević, Božidar ; Majetić, Dubravko (ur.). Zagreb: Fakultet elektrotehnike i računarstva Sveučilišta u Zagrebu ; Metalurški fakultet Sveučilišta u Zagrebu, 2016 (zbornik)
-
6.Kovačić, Saša; Cajner, Franjo; Landek, DarkoInfluence of steel substrate on the properties of PACVD gradient multilayer TiCN coating // Proceedings of the 3th Mediterranean Conference on Heat Treatment and Surface Engineering
Portorož, Slovenija, 2016. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
7.Pustaić, Dragan; Cajner, Franjo; Leskovšek, VojtehInvestigation of Heat Treatment Influence on Microstructure of High-Speed Steel and its Resulting Mechanical Properties // ABSTRACT BOOKLET - 8th International Conference on MATERIALS STRUCTURE & MICROMECHANICS OF FRACTURE - MSMF8 / Šandera, Pavel (ur.).
Brno: VUTIUM Brno, 2016. str. 225-225 (poster, međunarodna recenzija, sažetak, znanstveni) -
8.First Annual PhD Workshop, Zagreb, July 3, 2015 : PhD study of mechanical engineering, naval architecture, aeronautical engineering and metallurgical engineering : book of abstracts / Parunov, Joško ; Zovko Brodarac, Zdenka ; Duić, Neven ; Pustaić, Dragan ; Đukić, Goran ; Cajner, Franjo ; Runje, Biserka ; Terze, Zdravko ; Jokić, Andrej ; Bauer, Branko ; Sorić, Jurica ; Matijević, Božidar ; Majetić, Dubravko (ur.). Zagreb: Fakultet elektrotehnike i računarstva Sveučilišta u Zagrebu ; Metalurški fakultet Sveučilišta u Zagrebu, 2015 (zbornik)
-
9.Kovačić, SašaUtjecaj nitriranja i prevlačenja na svojstva alatnih čelika za topli rad, 2015., doktorska disertacija, Fakultet strojarstva i brodogradnje, Zagreb
-
10.Cajner, Franjo; Landek, Darko; Kovačić, SašaIntroduction and application of new tehnologies of plasma nitriding and PACVD coating // The Proceedings of the 5th International Conference „Mechanical Technologies and Structural Materials
Split, Hrvatska, 2015. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
11.Kovačić, Saša; Cajner, Franjo; Landek, DarkoWear resistance of TiN/TiCN and TiN/TiBN multilayer coatings applied on hot work tool steel // Engineering Materials and Tribology / Hussainova, Irina ; Veinthal, Renno (ur.).
Talin, Estonija, 2015. str. 257-262 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
12.Landek, Darko; Cajner, Franjo; Kovačić, Saša; Alar, Vesna; Macura, VladimirMicrostructure and corrosion behavior of duplex coating fabricated by plasma nitriding and TiN/TiCN pulsed DC PACVD method on K390 MC cold work tool steel // Proceedings of the European Conference on Heat Treatment 2015 & 22nd IFHTSE Congress
Venecija: Associazone Italiana di Metallurgia, 2015. (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
13.Cajner, Franjo; Landek, Darko; Rafael, Hrvoje; Jačan, Jurica; Bogdanić, DinoWear resistance of TiN/TiCN and TiN/Ti-B-N multilayers coatings fabricated by the pulsed DC PACVD process on k390 mc cold work tool steel // Proceedings of the European Conference on Heat Treatment 2015 & 22nd IFHTSE Congress
Milano: Associazone Italiana di Metallurgia, 2015. (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
14.Cajner, Franjo; Kovačić, Saša; Rafael, Hrvoje; Vugrinčić, Amalija; Šimunović, Vinko; Gržeta, BiserkaInfluence of nitriding on corrosion resistance of martensitic X17CrNi16-2 stainless steel // Materialwissenschaft und Werkstofftechnik, 46 (2015), 1; 69-77 doi:10.1002/mawe.201400386 (međunarodna recenzija, članak, znanstveni)
-
15.Zoričić, MateOtpornost čelika X155CrVMo12-1 na abrazivnu eroziju, 2014., diplomski rad, preddiplomski, Fakultet strojarstva i brodogradnje, Zagreb
-
16.Smolčić, JurajUtjecaj površine implantata na vezu s koštanim cementom, 2014., diplomski rad, diplomski, Fakultet strojarstva i brodogradnje, Zagreb
-
17.Pajan, MatijaMehanizmi dotrajavanja kalupa za tlačni lijev, 2014., diplomski rad, preddiplomski, Fakultet strojarstva i brodogradnje, Zagreb
-
18.Cajner, Franjo; Landek, Darko; Kumić, Ivan; Kovačić, Saša; Rafael, HrvojeTribological and microstructural investigations of the influence of deep cryogenic treatment on the properties of PM S390 MC high speed steel // Proceedings of European Conference on Heat Treatment and 21st IFHTSE Congress / Zoch, Hans-Werner ; Schneider, Reinhold ; Lübben, Thomas (ur.).
München: Arbeitsgemeinschaft Wärmbehandlung und Werkstofftechnik e. V. (AWT), 2014. str. 459-466 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
19.Cajner, Franjo; Landek, Darko; Cajner, Hrvoje; Rafael, Hrvoje; Kovačić, SašaCharacteristics of Warm Baths for the quenching of Tool Steels // Conference Proceedings of 9th International Conference on Industrial Tools and Material Processing Technologies / Hančič, Aleš ; Grum, Janez ; Gantar, Gašper ; Pulko, Irena (ur.).
Ljubljana: TECOS – Slovenian Tool and Die Development Center, 2014. str. 207-214 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
20.Landek, Darko; Cajner, Franjo; Rafael, Hrvoje; Ćavar, AntonioEffect of Application of Deep-cryogenic Treatment on the Pproperties of High Speed Steel PM S390 MC // Conference Proceedings of 9th International Conference on Industrial Tools and Material Processing Technologies / Hančič, Aleš ; Grum, Janez ; Gantar, Gašper ; Pulko, Irena (ur.).
Ljubljana: TECOS – Slovenian Tool and Die Development Center, 2014. str. 191-196 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
21.Cajner, Franjo; Leskovšek, Vojteh; Pustaić, DraganInfluence of Heat Treatment of High-Speed Steel on its Microstructure, Hardness and Fracture Toughness // Key Engineering Materials - MATERIALS STRUCTURE & MICROMECHANICS OF FRACTURE - MSMF7, 592-593 (2014), 680-683 doi:10.4028/www.scientific.net/KEM.592-593.680 (podatak o recenziji nije dostupan, original scientific paper, znanstveni)
-
22.Pustaić, Dragan; Cajner, FranjoInfluence of Heat Treatment on Crack Tip Opening Displacement and on Resistance of Crack Propagation of Alloyed Steel // Key Engineering Materials - MATERIALS STRUCTURE & MICROMECHANICS OF FRACTURE - MSMF7, 592-593 (2014), 660-663 doi:10.4028/www.scientific.net/KEM.592-593.660 (podatak o recenziji nije dostupan, original scientific paper, znanstveni)
-
23.Prlić, KrešimirUtjecaj dubokog hlađenja na trošenje čelika X155CrVMo12-1, 2013., diplomski rad, preddiplomski, Fakultet strojarstva i brodogradnje, Zagreb
-
24.Vugrinčić, AmalijaUtjecaj nitriranja na korozijsku postojanost čelika X17CrNi16-2, 2013., diplomski rad, diplomski, Fakultet strojarstva i brodogradnje, Zagreb
-
25.Stojić, MarinAnaliza otkazivanja endoproteze zgloba koljena, 2013., diplomski rad, diplomski, Fakultet strojarstva i brodogradnje, Zagreb
-
26.Starčević, MartinOtpornost na eroziju brzoreznog čelika PM S390 MC, 2013., diplomski rad, preddiplomski, Fakultet strojarstva i brodogardnje, Zagreb
-
27.Cajner, Franjo; Kovačić, Saša; Rafael, Hrvoje; Vugrinčić, Amalija; Šimunović, VinkoInfluence of nitriding on corrosion resistance of martensitic X17CrNi16-2 stainless steel // 2nd Mediterranean Conference & New Chalenges on Heat Treatment and Surface Engineering - Proceedings / Smoljan, Božo ; Matijević, Božidar (ur.).
Zagreb: Hrvatsko društvo za toplinsku obradu i inženjerstvo površina, 2013. str. 127-132 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
28.Cajner, Franjo; Leskovšek, Vojteh; Pustaić, DraganCORRELATION BETWEEN MICROSTRUCTURE, HARDNESS AND FRACTURE TOUGHNESS OF HEAT-TREATED HIGH-SPEED STEEL // Proceedings of The 30th DANUBIA-ADRIA Symposium on Advances in Experimental Mechanics / Alfirević, Ivo ; Semenski, Damir (ur.).
Zagreb: Croatian Society of Mechanics, Zagreb ; STUDIO HRG, Zagreb, Croatia, 2013. str. 276-277 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
29.Cajner, Franjo; Leskovšek, Vojteh; Pustaić, DraganInfluence of Heat Treatment of High-Speed Steel on its Microstructure, Hardness and Fracture Toughness // ABSTRACT BOOKLET - 7th International Conference on MATERIALS STRUCTURE & MICROMECHANICS OF FRACTURE - MSMF7 / Pavel Šandera (ur.).
Brno: VUTIUM Brno, 2013. str. 230-230 (poster, međunarodna recenzija, sažetak, znanstveni) -
30.Pustaić, Dragan; Cajner, FranjoInfluence of Heat Treatment on Crack Tip Opening Displacement and on Resistance of Crack Propagation of Alloyed Steel // ABSTRACT BOOKLET - 7th International Conference on MATERIALS STRUCTURE & MICROMECHANICS OF FRACTURE - MSMF7 / Pavel Šandera (ur.).
Brno: VUTIUM Brno, 2013. str. 225-225 (poster, međunarodna recenzija, sažetak, znanstveni) -
31.Cajner, Franjo; Kovačić Saša; Kumić, Ivan; Cajner HrvojeThe influence of deep cooling treatment on the properties of X155CrVMo 12-1 steel // The proceedings of 2nd mediterranean conference & new challenges on heat treatment and surface engineering / Smoljan, Božo ; Matijević, Božidar (ur.).
Zagreb, 2013. str. 323-330 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
32.Jenko, Darja; Šolić, Sanja; Leskovšek, Vojteh; Cajner, Franjo; Jenko, MonikaTransmission electron microscopy of PM S390 MC high- speed steel // Proceedings of the 19th International Vacuum Congress IVC - 19
Pariz: International Union for Vacuum Science, Technique and Applications, 2013. str. 1538-1539 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
33.Šolić, Sanja; Cajner, Franjo; Panjan, PeterInfluence of deep cryogenic treatment of high speed steel substrate on TiAlN coating properties // Materialwissenschaft und Werkstofftechnik, 44 (2013), 12; 950-958 doi:10.1002/mawe.201300168 (međunarodna recenzija, članak, znanstveni)
-
34.Landek, Darko; Cajner, Franjo; Rafael, Hrvoje; Kovačić, SašaInfluence of heat treatment parameters on the mechanical properties and wear resistance of hs10-2-5-8 high speed steel // The proceedings of 2nd mediterranean conference & new challenges on heat treatment and surface engineering / Smoljan, Božo ; Matijević, Božidar (ur.).
Zagreb: CSHTSE, 2013. str. 293-300 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
35.Landek, Darko; Petrič, Branko; Cajner, FranjoThe induction coils and power supplies for modern heating processes // The proceedings of 2nd mediterranean conference & new challenges on heat treatment and surface engineering / Smoljan, Božo ; Matijević, Božidar (ur.).
Zagreb: CSHTSE, 2013. str. 277-284 (poster, međunarodna recenzija, cjeloviti rad (in extenso), stručni) -
36.Cajner, Franjo; Landek, Darko; Kumić, Ivan; Vugrinčić, AmalijaInfluential factors in the surface hardness testing of a nitrided layer // Materiali in tehnologije, 47 (2013), 4; 531-533 doi:UDK 621.785.53:519.233.4 (međunarodna recenzija, članak, znanstveni)
-
37.Cajner, Franjo; Landek, DarkoPosebnosti toplinske obrade alatnih čelika // Proceeding of the International Conference on Heat Treatment and Surface Engineering – European Opportunities for Croatian Economy / Smoljan, Božo ; Iljkić, Dario (ur.).
Rijeka: Hrvatsko društvo za toplinsku obradu i inženjerstvo površina, 2012. str. 57-66 (pozvano predavanje, domaća recenzija, cjeloviti rad (in extenso), stručni) -
38.Cajner, Franjo; Landek, Darko; Kumić, Ivan; Vugrinčić, AmalijaInfluential factors in the surface hardness testing of a nitrided layer // 20th Jubilee Conference on Materials and Technology - Program and Book of Abstracts / Godec, M. ; Donik, Č. ; Paulin, I. ; Kocijan, A. (ur.).
Ljubljana: Institute of Metals and Technology, Ljubljana, Slovenia, 2012. str. 185-185 (poster, sažetak, stručni) -
39.Bajkovec, DragoRekonstrukcija uređaja za plinsko nitriranje, 2012., diplomski rad, diplomski, Fakultet strojarstva i brodogradnje, Zagreb
-
40.Vugrinčić, AmalijaUtjecajni čimbenici pri ispitivanju površinske tvrdoće nitriranog sloja, 2012., diplomski rad, diplomski, Fakultet strojarstva i brodogradnje, Zagreb
-
41.Smolčić, JurajKorozija metalnih implantata, 2012., diplomski rad, diplomski, Fakultet strojarstva i brodogradnje, Zagreb
-
42.Stojić, MarinPregled materijala i postupaka modificiranja i prevlačenja površina u izradi medicinskih implantata, 2012., diplomski rad, preddiplomski, Fakultet strojarstva i brodogradnje, Zagreb
-
43.Šolić, Sanja; Cajner, Franjo; Leskovšek, VojtehEffect of deep cryogenic treatment on mechanical and tribological properties of PM S390 MC high-speed steel // Materials Testing, 2012/10 (2012), 688-693 doi:10.3139/120.110380 (međunarodna recenzija, članak, znanstveni)
-
44.Cajner, Franjo; Landek, Darko; Rafael, Hrvoje; Kovačić, SašaEffect of the heating rate in the tempering of EN 100 V1 // Journal of heat treatment and materials, 67 (2012), 2; 118-124 doi:HT110145 (međunarodna recenzija, članak, znanstveni)
-
45.Cajner, Franjo; Landek, Darko; Rafael, Hrvoje; Šolić, Sanja; Kovačić, SašaEffect of deep cryogenic treatment on dilatometric curve and tribological properties of high speed steel // International heat treatment and surface engineering, 6 (2012), 2; 67-71 doi:10.1179/1749514812Z.00000000018 (međunarodna recenzija, članak, znanstveni)
-
46.Šimac, NikšaUtjecaj dubokog hlađenja na mikrostrukturu i svojstva čelika X155CrVMo12-1, 2011., diplomski rad, Fakultet strojarstva i brodogradnje, Zagreb
-
47.Faltis, KristianVakuumske peći za toplinsku obradu, 2011., diplomski rad, preddiplomski, Fakultet strojarstva i brodogradnje, Zagreb
-
48.Demeter, IzidorKeramički alatni materijali, 2011., diplomski rad, preddiplomski, Fakultet strojarstva i brodogradnje, Zagreb
-
49.Cajner, Franjo; Landek, Darko; Rafael, Hrvoje; Šolić, Sanja; Kovačić, SašaEffect of deep cryogenic treatment on dilatometric curve and tribological properties of high speed steel // Proceeding of The 19th IFHTSE Congress
Glasgow: IFHTSE, 2011. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
50.Cajner, Franjo; Šolić, Sanja; Kumić, Ivan; Leskovšek, VojtehEffect of Heat Treatment on Tribological Properties of PM S390MC High-Speed Steel // Proceedings of the 3rd International IFHTSE Conference on "Heat treatment and Surface engineering of Tools and Dies" / Schneider, Reinhold S. E. (ur.).
Leoben: ASMET, 2011. str. 143-150 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
