Pregled po CROSBI profilu: Mirko Gojić (CROSBI Profil: 19721, MBZ: 63390)
Pronađeno 344 radova
-
151.Kosec, Borut; Nagode, Aleš; Kosec, Gorazd; Hribar, Alenka; Gojić, Mirko; Vidic, Erika; Soković, Mirko; Karpe, BlažSlovenian steel producers and life cycle analysis // Proceedings of the International Scientific Conference ETIKUM 2013 / Doroslovački, Rade (ur.).
Novi Sad, 2013. str. 177-180 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
152.Kosec, Borut; Soković, Mirko; Karpe, Blaž; Gojić, Mirko; Nagode, Aleš; Kosec, GorazdFailure analysis of dies for aluminium alloys die- casting as the key to the quality // Proceedings of the International Scientific Conference ETIKUM 2013 / Doroslovački, Rade (ur.).
Novi Sad, 2013. str. 1-4 (pozvano predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
153.Gojić, Mirko; Kožuh, Stjepan; Ivanić, Ivana; Anžel, Ivan; Kosec, BorutProperties of Cu-Al-Ni shape memory alloys // Contemporary Materials / Kuzmanović, Rajko (ur.).
Banja Luka: Academy of Sciences and Arts of the Republic of Srpska, 2013. str. 157-166 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
154.Ivanić, Ivana; Gojić, Mirko; Anžel, Ivan; Kožuh, Stjepan; Rimac, Milenko; Beganović, Omer; Begović, Kemal; Kosec, BorutMicrostructure and properties of casted CuAlNi and CuAlNiMn shape memory alloys // Proceedings Book of 13th International Foundrymen Conference / Glavaš, Zoran ; Zovko Brodarac, Zdenka ; Dolić, Natalija (ur.).
Sisak: Metalurški fakultet Sveučilišta u Zagrebu, 2013. str. 153-162 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
155.Bizjak, Milan; Kožuh, Stjepan; Kosec, Borut; Gojić, Mirko; Karpe, BlažThe influence of Ti on the sequence of phase precipitation in rapidly solidified Cu-Fe-Ti alloys // Proceedings Book of 13th International Foundrymen Conference / Glavaš, Zoran ; Zovko Brodarac, Zdenka ; Dolić, Natalija (ur.).
Sisak: Metalurški fakultet Sveučilišta u Zagrebu, 2013. str. 24-30 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
156.Kosec, Ladislav; Gojić, Mirko; Kožuh, Stjepan; Kosec, Borut; Dražić, Goran; Šavli, ŠtefanThe effect of long-term annealing at elevated temperature on microstructure and hardness of heat-resistant steel // Abstract Booklet 15th International Symposium on Metallography / Longauerova, Margita (ur.).
Košice: Department of Materials Science, Faculty of Metallurgy, Technical University of Košice, 2013. str. 94-94 (poster, međunarodna recenzija, sažetak, znanstveni) -
157.Kosec, Ladislav; Šavli, Štefan; Kožuh, Stjepan; Holjevac Grgurić, Tamara; Nagode, Aleš; Kosec, Gorazd; Dražić, Goran; Gojić, MirkoTransformation of austenite during isothermal annealing at 600-900 °C for heat-resistant stainless steel // Journal of alloys and compounds, 567 (2013), 59-64 doi:10.1016/j.jallcom.2013.03.102 (međunarodna recenzija, članak, znanstveni)
-
158.Gojić, Mirko; Kožuh, Stjepan; Anžel, Ivan; Lojen, Gorazd; Ivanić, Ivana; Kosec, BorutMicrostructural and phase analysis of CuAlNi shape memory alloy after continuous casting // Materiali in tehnologije, 47 (2013), 2; 149-152 (međunarodna recenzija, članak, znanstveni)
-
159.Kožuh, Stjepan; Gojić, Mirko; Vrsalović, Ladislav; Ivković, BoškoCorrosion failure and microstructure analysis of AISI 316L stainless steels for ship pipeline before and after welding // Kovové materiály, 51 (2013), 1; 53-61 (međunarodna recenzija, članak, znanstveni)
-
160.Matic, Lešnjak; Kosec, Borut; Karpe, Blaž; Janjić, Goran; Gojić, Mirko; Bernetič, Jure; Kosec, GorazdThermal properties of armour steel protac 600 // Advanced Technologies and Materials, 46 (2012), 2; 33-36 (međunarodna recenzija, članak, znanstveni)
-
161.Gojić, Mirko; Vrsalović, Ladislav; Kožuh, Stjepan; Ćubela, Diana; Gudić, SenkaMicrostructure and Corrosion Properties Ni-Ti Alloy after Electrochemical Testing in 0.9 % NaCl Solution // Zaštita materijala, 53 (2012), 4; 345-351 (recenziran, članak, znanstveni)
-
162.Ivanić, Ivana; Gojić, Mirko; Kožuh, Stjepan; Rimac, Milenko; Beganović, Omer; Begović, Kemal; Ćubela, DijanaRazvoj Cu slitina s prisjetljivosti oblika // Zbornik radova TECHNO-EDUCA 2012 / Petković, Darko (ur.).
Zenica: Centar za inovativnost i poduzetništvo Univerziteta u Zenici, 2012. str. 82-87 (poster, cjeloviti rad (in extenso), stručni) -
163.Nagode, Aleš; Klančnik, Grega; Gojić, Mirko; Kosec, Borut; Zorc, Borut; Kosec, LadislavAn investigation of the surface damage of hot plates after black oxide coating // Proceedings of the 11th International Scientific Conference on Advanced Production Technologies / Čosić, Ilija (ur.).
Novi Sad: Faculty of Technical Sciences, Department of Production Engineering, 2012. str. 41-44 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
164.Karpe, Blaž; Kosec, Borut; Gojić, Mirko; Anžel, Ivan; Kitak, Sonja; Bizjak, MilanMathematical modeling of the melt cooling rate in the melt-spinning process // Proceedings of the 11th International Scientific Conference on Advanced Production Technologies / Čosić, Ilija (ur.).
Novi Sad: Faculty of Technical Sciences, Department of Production Engineering, 2012. str. 447-452 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
165.Živković, Dragana; Holjevac Grgurić, Tamara; Ćubela, Dijana; Kostov, Ana; Gojić, Mirko; Kožuh, StjepanThermodynamics of Cu-Al-(Ag, Au) shape memory alloys // 44th International October Conference on Mining and Matallurgy : proceedings / Kostov, Ana ; Ljubojev, Milenko (ur.).
Bor: Tehnički fakultet Bor ; Institut za rudarstvo i metalurgiju, 2012. str. 457-460 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
166.Kožuh, Stjepan; Gojić, Mirko; Ivanić, Ivana; Kosec, BorutMicrostructure of welded austenitic stainless steel after annealing at 900°C // Zbornik radova ZAVARIVANJE 2012 & IRB 2012 / Lukić, Branislav ; Radojičić, Dragoljub (ur.).
Beograd: Društvo za unapređivanje zavarivanja u Srbiji, 2012. str. 1-9 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
167.Gojić, Mirko; Kožuh, Stjepan; Anžel, Ivan; Lojen, Gorazd; Ivanić, Ivana; Kosec, BorutMicrostructure of CuAlNi shape memory alloy after continuous casting // MATRIB 2012 / Željko Alar, Suzana Jakovljević (ur.).
Zagreb: Croatian Society for Materials and Tribology, 2012. str. 84-92 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
168.Kožuh, Stjepan; Gojić, Mirko; Kosec, Borut; Pinotić, Damir; Smolčić, DraženAnalysis of weld joint quality and microstructure of duplex stainless steel // Proceedings of the EWT Eurojoin 8 Conference / Kožuh, Zoran (ur.).
Zagreb: European Federation for Welding, Joining and Cutting & Croatian Welding Society, 2012. str. 677-685 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
169.Gojić, Mirko; Kožuh, Stjepan; Šavli, Štefan; Nagode, Aleš; Kosec, Borut; Kosec, LadislavMicrostructure of heat-resistant austenitic steel after isothermal annealing at 700 °C // Proceedings book of 12th International Foundrymen Conference / Dolić, Natalija ; Glavaš, Zoran ; Zovko Brodarac, Zdenka (ur.).
Sisak: Metalurški fakultet Sveučilišta u Zagrebu, 2012. str. 83-91 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
170.Gojić, Mirko; Kožuh, Stjepan; Kosec, Borut; Anžel, IvanProperties and applications of shape memory alloys // Proceedings of 9th Scientific-Research Symposium with International Participation / Muhamedagić, Sulejman (ur.).
Zenica: Univerzitet u Zenici, Fakultet za metalurgiju i materijale, 2012. str. 1-11 (plenarno, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
171.Karpe, Blaž; Kosec, Borut; Bizjak, Milan; Markoli, Boštjan; Gojić, Mirko; Anžel, IvanDetermination of convective variables in free jet melt-spinning process // Proceedings of 9th Scientific-Research Symposium with International Participation / Muhamedagić, Sulejman (ur.).
Zenica: Univerzitet u Zenici, Fakultet za metalurgiju i materijale, 2012. str. 45-52 (poster, međunarodna recenzija, cjeloviti rad (in extenso), stručni) -
172.Gojić, Mirko; Vrsalović, Ladislav; Kožuh, Stjepan; Ćubela, Diana; Gudić, SenkaMicrostructural Analysis of Ti-Ni Shape Memory Alloy after Corrosion Testing in 0.9 % NaCl Solution // Proceedings of XIV YuCorr International Conference / Pavlović, Miomir ; Panić, Vladimir (ur.).
Beograd: Udruženje inženjera Srbije za koroziju i zaštitu materijala, 2012. str. 289-297 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
173.Nagode, Aleš; Klančnik, Grega; Schwarczova, Heidy; Kosec, Borut; Gojić, Mirko; Kosec, LadislavAnalyses of defects on the surface of hot plates for an electric stove // Engineering failure analysis, 23 (2012), 82-89 doi:10.1016/j.engfailanal.2012.03.001 (međunarodna recenzija, članak, znanstveni)
-
174.Kosec, Ladislav; Šavli, Štefan; Kožuh, Stjepan; Holjevac Grgurić, Tamara; Nagode, Aleš; Kosec, Gorazd; Gojić, MirkoTransformation of austenite during isothermal annealing at 600-900°C for heat resistant stainless steel // POLYCHAR 20 : World Forum Advanced Materials : book of abstracts / Rogošić, Marko ; Macan, Jelena (ur.).
Zagreb: University of Zagreb ; Faculty of Chemical Engineering and Technology, 2012. str. 268-268 (poster, međunarodna recenzija, sažetak, znanstveni) -
175.Gojić, Mirko; Lazić, Ladislav; Kožuh, Stjepan; Kosec, BorutThe effect of defects on tensile strength of the continuous steel casting products // RMZ - Materials and geoenvironment, 58 (2011), 3; 241-252 (recenziran, članak, znanstveni)
