Pregled po CROSBI profilu: Gordana Marunić (CROSBI Profil: 18772, MBZ: 29164)
Pronađeno 98 radova
-
51.Marunić, Gordana3D Complex Blank Gear Models // RIM 2005 Development and Modernization of Production / Karabegović, Isak ; Jurković, Milan ; Doleček, Vlatko (ur.).
Bihać: Tehnički fakultet Univerziteta u Bihaću, 2005. str. 317-321 (predavanje, cjeloviti rad (in extenso), znanstveni) -
52.Marunić, GordanaLongitudinal Stress Distribution at Tooth-Root // microCAD 2005 International Scientific Conference / Kovacs, Tiborne (ur.).
Miskolc: University of Miskolc, Innovation and Technology Transfer Centre, 2005. str. 65-68 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
53.Troha, Sanjin; Marunić, GordanaModelling of External Gears // CADAM 2004 : selected papers / 2nd International Conference on Computer Aided Desing and Manufacturing, Šibenik, September 28th-1st October 2004 / Obsieger, Boris (ur.).
Rijeka: Zigo, 2004. str. 165-170 -
54.Marunić, GordanaStress Analysis of Spur Loaded Tooth and its Adjacent Teeth // Proceedings of the 3rd International Conference UPS 2004 Business Systems Management / Majstorović, V ; Katalinić, B. ; Čović, D. ; Višekruna, V. (ur.).
Mostar : Beč: University of Mostar ; DAAAM International Vienna ; Austrian Society of Engineers and Architects OEIAV-1848 ; Scientific and Technical Forum of Mostar, 2004. str. 133-136 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
55.Troha, Sanjin; Marunić, GordanaModelling of External Gears // 2nd International Conference on Computer Aided Design and Manufacturing, Book of Abstracts / Obsieger, Boris (ur.).
Rijeka: Zigo, Rijeka, 2004. str. 57-58 (predavanje, međunarodna recenzija, sažetak, stručni) -
56.Marunić, GordanaEffects of Thin-Rimmed Gear Size upon Tooth-Fillet Stress Alternation // 8th International Research/Expert Conference "Trends in the Development of Machinery and Associated Technology" TMT 2004 / Ekinović, Sabahudin ; Brdarević, Safet ; Calvet, Joan V. ; Sales, Ferran P. (ur.).
Neum: Faculty of Mechanical Engineering in Zenica, Escola Technica Superior D`Enginyeria Industrial de Barcelona, Department d`Enginyeria Mechanica, Universitat Politecnica de Catalunya, 2004. str. 395-398 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
57.Marunić, GordanaTooth Fillet Stress Alternation of Thin-Rimmed Gear // Proceedings of The International Conference On Vehicles Alternative Fuel Systems & Environmental Protection, VAFSEP 2004 / Olabi, Abdul Ghani (ur.).
Dublin: Dublin City University, 2004. str. 416-421 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
58.Marunić, GordanaStress Alternation at Gear Tooth Fillet for Meshing Phase // Tools and Methods of Competitive Engineering, Volume 2 / Horvath, Imre ; Xirouchakis, Paul (ur.).
Rotterdam : Boston (MA) : Taipei: Millpress, 2004. -
59.Marunić, GordanaGear Tooth-Root Stress of Single Pair Contact // microCAD 2004 International Scientific Conference / Gyla, Patko (ur.).
Miskolc: University of Miskolc, Innovation and Technology Transfer Centre, 2004. str. 59-64 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
60.Marunić, GordanaOd tradicionalne do CAD inženjerske grafike // Engineering Review, 23 (2003), 45-51 (podatak o recenziji nije dostupan, članak, stručni)
-
61.Marunić, GordanaStress Variation at Loaded Teeth Bottoms of Thin-Rimmed Gear // CADAM 2003 : selected papers / 1st International Conference on Computer Aided Design and Manufacturing / Obsieger, Boris (ur.).
Ičići: Revelin ; Zigo, 2003. str. 49-55 -
62.Troha, Sanjin; Marunić, GordanaCylindrical and Bevel Gear Geometrical Model // 9. znanstveno-stručni kolokvij
Crikvenica: Hrvatsko društvo za konstruktivnu geometriju i kompjutorsku grafiku, 2003. (predavanje, sažetak, stručni) -
63.Marunić, GordanaStress Variation at Loaded Teeth Bottoms of Thin-Rimmed Gear // 1St International Conference on Computer Aided Design and Manufacturing Book of Abstracts / Obsieger, Boris (ur.).
Ičići: Revelin Ičići, 2003. str. 35-36 (predavanje, međunarodna recenzija, sažetak, znanstveni) -
64.Troha, Sanjin; Marunić, Gordana3D geometrijsko modeliranje zupčastog reduktora // International Scientific Conference on Production Engineering (RIM 2003) : proceedings / Karabegović, Isak ; Jurković, Milan ; Dolenček, Vlatko (ur.).
Bihać: Faculty of Technical Engineering, 2003. str. 55-60 (poster, cjeloviti rad (in extenso), stručni) -
65.Marunić, GordanaChanges of Spur Tooth Stress with Change of Meshing Phase // 4th International Scientific Conference on Production Engineering (RIM 2003) : proceedings / Karabegović, Isak ; Jurković, Milan ; Doleček, Vlatko (ur.).
Bihać: University of Bihać Faculty of Technical Engineering Bihać ; International Biographical Centre Cambridge, 2003. str. 61-66 (poster, sažetak, znanstveni) -
66.Marunić, GordanaSpur Tooth-root Maximum Stress of Meshing Phase // Proceeding of the 7th International Research/Expert Conference Trends in the Development of Machinery and Associated Technology (TMT 2003) / Vivancos, Juan ; Puerta, Feran ; Ekinović, Sabahudin ; Brdarević, Safet (ur.).
Lloret de Mar: Faculty of Mechanical Engineering in Zenica, Escola Technica Superior D´Enginyeria de Barcelona, Universitat Politecnica de Catalunya, 2003. str. 633-636 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
67.Marunić, GordanaMaximum Fillet Stress of Thin-Rimmed Gear During One Engagement Cycle // DAAAM International Scientific Book 2003 / Katalinić, Branko (ur.).
Beč: DAAAM International Vienna, 2003. -
68.Marunić, GordanaComparison of Gear Tooth-Root Stresses Obtained by Different Numerical Models // Proceedings of the 2nd DAAAM International Conference on Advanced Technologies for Developing Countries / Katalinić, B ; Tufekčić, Dž. ; Šelo, R. (ur.).
Tuzla: University of Tuzla Faculty of Mechanical Engineering in Tuzla ; DAAAM International Vienna, 2003. str. 53-58 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
69.Marunić, GordanaFillet Stress Related to Non-Uniformly Loaded Gear Tooth Geometry // AMST`02 Advanced Manufacturing System and Technology / Kuljanic, Elso (ur.).
Udine: Springer, 2002. str. 825-831 -
70.Marunić, GordanaMaximum Fillet Stress of Thin-Rimmed Gear During One Engagement Cycle // Annals of DAAAM for 2002&Proceedings of the 13th International DAAAM Symposium / Katalinić, B. (ur.).
Beč: DAAAM International Vienna, 2002. str. 345-346 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
71.Marunić, GordanaComplex 3D Pinion-Gear Model // 6th International Research/Expert Conference Trends in the Development of Machinery and Associated Technology TMT2002 / Brdarević,Safet;Ekinović,Sabahudin;Pascual,Ramon C.;Calvet,Joan (ur.).
Neum: University of Sarajevo; Universitat Politecnica de Catalunya, 2002. str. 445-448 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
72.Marunić, GordanaRim Thickness Influence on Maximum Fillet Stress Position of Non-Uniformly Loaded Gear Tooth // UMTIK 2002 CD / Erden,Abdulkadir; Akkok,Metin;Kilic, S. Engin (ur.).
Carlton: Matimaren, 2002. str. 85-92 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
73.Marunić; GordanaMaximum Stress Position of Non-Uniformly Loaded Spur Tooth // MicroCAD 2001 International Scientific Conference / Patko, Gyla (ur.).
Miskolc: Miskolci Egyetem es Technlogia Tranzfer Centrum, 2001. str. 19-23 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
74.Marunić, GordanaDeformation of a Solid Gear Tooth Foundation // RIM 2001-Revitalization and Modernization of Production / Jurković, Milan, Karabegović, Isak (ur.).
Bihać: Tehnički fakultet Univerziteta u Bihaću, 2001. str. 147-152 -
75.Marunić, GordanaEffects of Foundation upon Spur Tooth Deformation // Proceedings of Third International Congress Mechanical Engineering Technolgies` 01 / Damianov, D. (ur.).
Sofija: Scientific - Technical Union of Mechanical Engineering, 2001. str. 100-102 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
