Pregled po CROSBI profilu: Branimir Lela (CROSBI Profil: 18418, MBZ: 250123)
Pronađeno 58 radova
-
1.Jozić, Sonja; Lela, Branimir; Krolo, Jure; Jakovljević, SuzanaProduction of Open-Cell Metal Foams by Recycling of Aluminum Alloy Chips // Materials, 16 (2023), 11; 3930, 17 doi:10.3390/ma16113930 (međunarodna recenzija, članak, znanstveni)
-
2.Jozić, Sonja; Lela, Branimir; Bajić, DraženCONTRIBUTION TO SUSTAINABILITY BY RECYCLING ALUMINUM ALLOY CHIPS // -
Bratislava, Slovačka, 2022. str. - (pozvano predavanje, međunarodna recenzija, sažetak, znanstveni) -
3.Krolo, Jure; Lela, Branimir; Biba, Nikolay; Šakota, DomagojAnalysis of the tube hydroforming by numerical simulation and Response Surface Methodology // Proceedings of International conference “Mechanical Technologies and Structural Materials” / Jozić, Sonja ; Lela, Branimir ; Gjeldum, Nikola (ur.).
Split, Hrvatska, 2022. str. 81-86 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
4.Grgić, Karla; Lela, Branimir; Jozić, Sonja; Krolo, JureAluminium foams made of various aluminium alloys scrap and various foaming agents // Proceeding of International conference “Mechanical Technologies and Structural Materials” / Jozić, Sonja ; Lela, Branimir ; Gjeldum, Nikola (ur.).
Split, 2022. str. 37-42 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
5.Igor Ćulum; Ivana Dumanić; Sonja Jozić; Dražen Bajić; Branimir LelaInfluence of cutting parameters on cutting forces and surface roughness in milling of aluminum foam // Mechanical Technologies and Structural Materials, MTSM2022
Split, Hrvatska, 2022. str. 21-28 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
6.Vrsalovic, Ladislav; Gudić, Senka; Krolo, Jure; Lela, Branimir; Jozić, Sonja; Bajić, Dražen; Grgić, KarlaCorrosion behavior of Al foams in 0.5 M NaCl solution // 22th International Conference on Materials, Tribology and Recycling - MATRIB 2022 / Bušić, Matija ; Leder Horina, Jasna ; Tropša, Vlado (ur.).
Zagreb: Hrvatsko društvo za materijale i tribologiju (HDMT), 2022. str. 431-440 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
7.Krolo, Jure; Lela, Branimir; Grgić, Karla; Jozić, SonjaProduction of Closed-Cell Foams out of Aluminum Chip Waste: Mathematical Modeling and Optimization // Metals, 12 (2022), 6; 933, 17 doi:10.3390/met12060933 (međunarodna recenzija, članak, znanstveni)
-
8.Krolo, Jure; Lela, BranimirAlternative methods of aluminum alloys recycling in solid and semisolid state // 13th International Conference Structural Materials 2021
Bratislava, Slovačka, 2021. str. 1-1 (pozvano predavanje, međunarodna recenzija, sažetak, znanstveni) -
9.Lela, Branimir; Jozić, Sonja; Krolo, Jure; Dumanić, Ivana; Grgić, KarlaProduction of Open Cell Foams Out of Aluminium Chips // Athens journal of technology & engineering, 8 (2021), 4; 299-310 doi:10.30958/ajte.8-4-2 (međunarodna recenzija, članak, znanstveni)
-
10.Krolo, Jure; Lela, Branimir; Ević, Joze; Biba, Nikolay3D finite element analysis of ECAP processing routes influence on strain homogeneity // Proceedings 30th Anniversary International Conference on Metallurgy and Materials
Ostrava: TANGER Ltd., 2021. str. 235-240 doi:10.37904/metal.2021.4116 (ostalo, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
11.Lela, Branimir; Krolo, Jure; Grgić, Karla; Jozić, Sonja; Dumanić, IvanaProduction of closed cell foams from the aluminium chip waste // Proceedings of International conference “Mechanical Technologies and Structural Materials”
Split, 2021. str. 95-100 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
12.Lela, Branimir; Jozić, Sonja; Krolo, Jure; Dumanić, Ivana; Grgić, KarlaProduction of Open-Cell Foams out of Aluminium Chips // Proceedings of 8th Annual International Conference on Technology & Engineering / Papanikos, Gregory T. (ur.).
Atena, 2021. 7, 13 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
13.Krolo, Jure; Dumanić, Ivana; Jozić, Sonja; Lela, BranimirInfluence of semi-solid metal processing and artificial aging on microstructure and hardness of the AlSi9Cu3(Fe) // Proceeding book of the 19th International Foundryman Conference entitled: Humans - Valuable Resource for Foundry Industry Development / Dolić, Natalija ; Zovko Brodarac, Zdenka ; Brajčinović, Sandra (ur.).
Sisak: Faculty of Metallurgy, 2021. str. 186-193 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
14.Krolo, Jure; Gudić, Senka; Vrsalović, Ladislav; Lela, Branimir; Dadić, ZvonimirFatigue and corrosion behavior of solid state recycled aluminum alloy EN AW 6082 // Journal of materials engineering and performance, 29 (2020), 4310-4321 doi:10.1007/s11665-020-04975-8 (međunarodna recenzija, članak, znanstveni)
-
15.Dumanić, Ivana; Krolo, Jure; Lela, Branimir; Jozić, SonjaThermomechanical treatment of A380 aluminum alloy for globular thixo feedstock // Materialwissenschaft und Werkstofftechnik, 51 (2020), 1047-1057 doi:10.1002/mawe.202000076 (međunarodna recenzija, članak, znanstveni)
-
16.Krolo, Jure; Dumanić, Ivana; Jozić, Sonja; Lela, BranimirMicrostructure of the extruded aluminium AlSi9Cu3(Fe) machining chips reheated in the semisolid state // "Mechanical Technologies and Structural Materials 2019” Conference Proceedings / Jozić, Sonja ; Lela, Branimir (ur.).
Split: Hrvatsko društvo za strojarske tehnologije, 2019. str. 109-114 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
17.Dumanić, Ivana; Krolo, Jure; Jozić, Sonja; Lela, Branimir; Bajić, Dražen; Ljumović, PetarINFLUENCE OF THE PROCESSING ROUTE ON THE MICROSTRUCTURE FORMATION AT SEMI-SOLID TEMPERATURES FOR ALUMINUM ALLOY A380 // CONFERENCE PROCEEDINGS of the 20th International Conference on Materials / Šolić, Sanja ; Schauperl, Zdravko ; Pugar, Daniel (ur.).
Zagreb: Hrvatsko društvo za materijale i tribologiju (HDMT), 2019. str. 137-144 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
18.Krolo, Jure; Lela, Branimir; Dumanić, Ivana; Kozina, FranjoStatistical Analysis of the Combined ECAP and Heat Treatment for Recycling Aluminum Chips Without Remelting // Metals, 9 (2019), 6; 660, 14 doi:10.3390/met9060660 (međunarodna recenzija, članak, znanstveni)
-
19.Lela, Branimir; Krolo, Jure; Mirić, TeaMathematical modeling of an experimental- analytical method for friction coefficient determination in deep drawing // Materialwissenschaft und Werkstofftechnik, 50 (2019), 372-381 doi:10.1002/mawe.201800018 (međunarodna recenzija, članak, znanstveni)
-
20.Krolo, Jure; Lela, Branimir; Ljumović, Petar; Bagavac, PetraEnhanced Mechanical Properties of Aluminium Alloy EN AW 6082 Recycled without Remelting // Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 26 (2019), 5; 1253-1259 (međunarodna recenzija, članak, znanstveni)
-
21.Krolo, Jure; Lela, Branimir; Švagelj, Zrinka; Jozić, SonjaAdaptive neuro-fuzzy and regression models for predicting microhardness and electrical conductivity of solid-state recycled EN AW 6082 // International journal of advanced manufacturing technology, 100 (2019), 9/12; 2981-2993 doi:10.1007/s00170-018-2893-x (međunarodna recenzija, članak, znanstveni)
-
22.Lela, Branimir; Krolo, JureRecycling of EN AW 2011 Aluminum Chips without Remelting // Encyclopedia of Aluminum and Its Alloys / Totten, G.E. ; Tiryakioglu, M ; Kessler, O. (ur.).
Boca Raton (FL): Taylor & Francis, 2018. str. 2361-2369 doi:10.1201/9781351045636-140000244 -
23.Nižetić, Sandro; Radica, Gojmir; Zanki, Vlasta; Lela, BranimirLaboratory investigation of the market available biomass pellet fuels for residential applications: A Croatian case // 3rd International Conference on Smart and Sustainable Technologies, SpliTech 2018
Split: Fakultet elektrotehnike, strojarstva i brodogradnje Sveučilišta u Splitu, 2018. str. 1-3 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
24.Krolo, Jure; Lela, Branimir; Kojundžić, Domagoj; Šerić, JelenaCompressive flow stress and hardness determination for composites based on aluminum waste // Mechanical Technologies and Structural Materials 2018, Conference Proceedings / Jozić, Sonja ; Gjeldum, Nikola (ur.).
Split, 2018. str. 111-117 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
25.Krolo, Jure; Lela, Branimir; Ljumović, PetarElectrical conductivity and mechanical properties of the solid state recycled EN AW 6082 alloy // “Mechanical Technologies and Structural Materials 2017” Conference Proceedings / Jozić, Sonja ; Lela, Branimir (ur.).
Split: Hrvatsko društvo za strojarske tehnologije, 2017. str. 71-76 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
26.Lela, Branimir; Krolo, JureAn experimental-analytical method for determination of friction factor in deep drawing // Computer integrated manufacturing and high speed machining / E. Abele, T. Udiljak, D. Ciglar (ur.).
Zagreb, 2017. str. 181-187 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
27.Lela, Branimir; Krolo, Jure; Jozić, SonjaMathematical modeling of solid-state recycling of aluminum chips // International journal of advanced manufacturing technology, 87 (2016), 1; 1125-1133 doi:10.1007/s00170-016-8569-5 (međunarodna recenzija, članak, znanstveni)
-
28.Krolo, Jure; Lela, Branimir; Vuleta, RafaelaPreliminary study of severe plastic deformation tool for production of solid state recycled materials // Proceedings of 6th International Conference Mechanical Technologies and Structural Materials / Jozić, Sonja ; Lela, Branimir (ur.).
Split, 2016. str. 79-84 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
29.Lela, Branimir; Duplančić, Igor; Krolo, JureInfluence of Billet Processing on Extruded Section Properties // Proceedings of Eleventh International Aluminum Extrusion Technology
Chicago (IL), Sjedinjene Američke Države, 2016. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
30.Lela, Branimir; Barišić, Marin; Nižetić, SandroCardboard/sawdust briquettes as biomass fuel : Physical-Mechanical and thermal characteristics // Waste management, 47 (2016), Part B; 236-245 doi:10.1016/j.wasman.2015.10.035 (međunarodna recenzija, članak, znanstveni)
-
31.Lela, Branimir; Rogante, Massimo; Živković, Dražen; Šapina, IvonaEFFETI SUGLI ACCIAI A BASSO CONTENUTO DI CARBONIO E LORO CARATTERIZZAZIONE // Trattamenti & Finiture, 5 (2015), 26-34 (podatak o recenziji nije dostupan, prethodno priopćenje, znanstveni)
-
32.Lela, Branimir; Krolo, Jure; Dragičević, MarioSOLID-STATE RECYCLING OF EN AW 2011 ALUMINIUM CHIPS // Proceedings of 5th International Conference Mechanical Technologies and Structural Materials 2015 / Jozić, Sonja ; Lela, Branimir (ur.).
Split: Croatian society for mechanical technologies, 2015. str. 101-106 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
33.Celent, Luka; Bajić, Dražen; Jozić, Sonja; Lela, BranimirPerformance of environmentally friendly machining using compressed cold air cooling: focusing on process level activities and improvements // Trends in the Development of Machinery and Associated Technology - TMT 2015 / Sabahudin, Ekinović (ur.).
Zenica: Mašinski fakultet Univerziteta u Zenici, 2015. str. 9-12 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
34.Jozić, Sonja; Lela, Branimir; Bajić, DraženA New Mathematical Model for Flank Wear Prediction Using Functional Data Analysis Methodology // Advances in Materials Science and Engineering, 2014 (2014), 138168-1 doi:10.1155/2014/138168 (međunarodna recenzija, članak, znanstveni)
-
35.Cvitanić, Vedrana; Ivandić, Daniel; Lela, BranimirComparison of orthotropic constitutive models in predicting square cup deep drawing process of AA2090-T3 sheet // Proceedings of 4th International Conference Mechanical Technologies and Structural Materials 2014 / Živković, Dražen (ur.).
Split: Croatian society for mechanical technologies, 2014. str. 61-70 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
36.Lela, Branimir; Musa, Ante; Zovko, OliverModel-based controlling of extrusion process // International journal of advanced manufacturing technology, 74 (2014), 9; 1267-1273 doi:10.1007/s00170-014-6054-6 (međunarodna recenzija, članak, znanstveni)
-
37.Lela, Branimir; Barišić, MarinCARDBOARD BRIQUETTES FOR HEAT ENERGY PRODUCTION // Proceedings of 4th International Conference Mechanical Technologies and Structural Materials 2014 / Živković, Dražen (ur.).
Split: Croatian society for mechanical technologies, 2014. str. 83-86 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
38.Lela, Branimir; Živković, Dražen; Šapina, IvonaANNEALING INFLUENCE ON GRAIN SIZE AND MECHANICAL PROPERTIES IN LOW CARBON STEELS // Mechanical technologies and structural materials conference proceedings / Živković, Dražen (ur.).
Split: Croatian society for mechanical technologies, 2013. str. 127-132 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
39.Duplancic, Igor; Lela, Branimir; Musa, Ante; Zovko, OliverFunctional Data Analyses in Control of Extrusion Process // Proceedings of the Tenth International Aluminum Extrusion Technology Seminar
Wauconda (IL): ET Foundation, 2012. str. 655-663 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
40.Duplančić, Igor; Krstić Vukelja, Elizabeta; Lela, BranimirA study on continuous roll casting for production of aluminium alloys strips // Aluminium two thousand : From Bologna to the Future : proceedings / Dalla Barba, Walter (ur.).
Modena: Interal srl, 2011. str. 23-33 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
41.Lela, Branimir; Duplančić, Igor; Šupe, MiroslavFunctional data analysis and its application in production processes // Conference Proceedings ''Mechanical Technologies and Structural Materials'' / Dražen Živković (ur.).
Split: CROATIAN SOCIETY FOR MECHANICAL TECHNOLOGIES, 2011. str. 93-98 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
42.Lela, Branimir; Duplančić, Igor; Šupe, MiroslavROLLING FORCE PREDICTION FOR ALUMINIUM STRIP HOT ROLLING PROCESS BY MEANS OF FUNCTIONAL DATA ANALYSES // CONFERENCE PROCEEDINGS of the 7th World Congress Aluminium Two Thousand / Walter Dalla Barba (ur.).
Modena: Interall, 2011. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
43.Lela, BranimirPredviđanje parametara upravljanja proizvodnih procesa analizom funkcijskih podataka, 2010., doktorska disertacija, Fakultet elektrotehnike, strojarstva i brodogradnje, Split
-
44.Elizabeta, Krstić Vukelja; Igor, Duplančić; Branimir, LelaROLL SHELL QUALITY FOR ALUMINIUM CONTINUOUS ROLL CASTERS–MECHANICAL FEATURES ANALYSIS // Proceedings book of the 10th International Foundrymen Conference, Casting Production-Progress through Knowledge, Quality and Environmental Protection / Unkić, Faruk (ur.).
Sisak: Faculty of Metallurgy, University of Zagreb, 2010. str. ?-? (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
45.Krstić Vukelja, Elizabeta; Duplančić, Igor; Lela, BranimirContinuous roll casting of aluminium alloys– casting parameters analysis // Metalurgija, 49 (2010), 2; 115-118 (podatak o recenziji nije dostupan, prethodno priopćenje, znanstveni)
-
46.Lela, Branimir; Bajić, Dražen; Jozić, SonjaRegression analysis, support vector machines and Bayesian neural network approaches to modeling surface roughness in face milling // International Journal of Advanced Manufacturing Technology, 42 (2009), 11-12; 1082-1088 doi:10.1007/s00170-008-1678-z (međunarodna recenzija, članak, znanstveni)
-
47.Lela, Branimir; Duplančić, Igor; Bajić, DraženParametric and nonparametric modelling of earing and hardness of deep drawn cups // Materials Science and Technology, 25 (2009), 8; 969-975 (međunarodna recenzija, članak, znanstveni)
-
48.Lela, Branimir; Duplančić, Igor; Prgin, JerePossibility of grain size prediction in AA5754 aluminium ingots using neural networks // International Journal of Cast Metals Research, 21 (2008), 5; 357-363 doi:10.1179/136404608X334053 (međunarodna recenzija, članak, znanstveni)
-
49.Duplančić, Igor; Lela, Branimir; Vlak, Frane; Prgin, JereAnalysis of Mechanical Properties of 2xxx T3 and T8 Aluminum Extruded Rods by Means of Neural Networks // Proceedings of ninth International Aluminum Extrusion Technology Seminar Vol. II / ET Foundation (ur.).
Orlando (FL): ET Foundation, 2008. str. 377-386 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
50.Bajić, Dražen; Lela, Branimir; Živković, DraženModeling of machined surface roughness and optimization of cutting parameters in face milling // Metallurgy-Metalurgija / Mamuzić, Ilija (ur.).
Zagreb: Croatian Metallurgical Society (CMS), 2008. str. 281-281 (poster, međunarodna recenzija, sažetak, znanstveni) -
51.Živković, Dražen; Ursić, Tonći; Lela, BranimirMicrostructure and properties of aluminium alloy cast piston // MATRIB 2008 / Grilec, Krešimir ; Marić, Gojko ; Suzana, Jakovljević (ur.).
Zagreb: Hrvatsko društvo za materijale i tribologiju (HDMT), 2008. str. 421-430 (poster, domaća recenzija, cjeloviti rad (in extenso), znanstveni) -
52.Bajić, Dražen; Lela, Branimir; Živković, DraženMODELING OF MACHINED SURFACE ROUGHNESS AND OPTIMIZATION OF CUTTING PARAMETERS IN FACE MILLING // Metalurgija, 47 (2008), 4; 331-334 (međunarodna recenzija, članak, znanstveni)
-
53.Bajić, Dražen; Lela, Branimir; Cukor, GoranExamination and modelling of the influence of cutting parameters on the cutting force and the surface roughness in longitudinal turning // Strojniški vestnik - Journal of Mechanical Engineering, 54 (2008), 5; 322-333 (međunarodna recenzija, članak, znanstveni)
-
54.Lela, Branimir; Duplančić, Igor; Prar, PetarInfluence of blank holder force and annealing time and temperature of aluminum AA8011A sheet on earing and hardness of deep drawn cups // ICIT&MPT 2007 6th Internatinal Conference on Industrial Tools and Material Processing Technologies / Kuzman, Karl (ur.).
Celje: TECOS slovenian Tool and Die Development Centre, 2007. str. 121-124 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
55.Mišina, Nedjeljko; Lela, Branimir; Polajnar, IvanWELDABILITY OF MICROALLOYED STEEL NIOMOL 490 // Computer integrated manufacturing and high speed machining / E. Abele, T. Udiljak, D. Ciglar (ur.).
Zagreb: DENONA d.o.o., 2007. str. 229-236 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
56.Lela, Branimir; Duplančić, Igor; Prgin, JereApplication of neural networks in microstructure prediction of aluminum DC cast ingots // 6th International Congres "Aluminium Two Thousand" : proceedings
Firenca, Italija, 2007. str. xx-yy (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
57.Lela, Branimir; Duplančić, Igor; Prgin, Jere; Markotić, AnteSimulation of grain size behavior in microstructure of AA5251 aluminum ingots by neural networks // 7th International Foundrymen Conference
Opatija, 2006. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
58.Lozina, Željan; Duplančić, Igor; Lela, BranimirOptimization of aluminum extrusion and die design using neural networks and genetic algorithms // Aluminium Two Thousand
Rim, 2003. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
