Pregled po CROSBI profilu: Zoran Jurković (CROSBI Profil: 17257, MBZ: 232474)
Pronađeno 305 radova
-
226.Jurković, Zoran; Brezočnik, Miran; Sekulić, MilenkoOptimization of Cutting Conditions for Surface Roughness Based on Orthogonal Arrays // Trends in the Development of Machinery and Associated Technology / Ekinović, S. ; Yalcin, S. ; Vivancos, J. (ur.).
Zenica: Faculty of Mechanical Engineering, 2009. str. 41-44 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
227.Jurković, ZoranModelling and Optimization Methods Prerequisite for Implementation in the Intelligent Machining Systems // Development and Modernization of Production / Karabegović, Isak ; Jurković, Milan ; Doleček, Vlatko (ur.).
Bihać: Faculty of Technical Engineering, 2009. str. 43-55 (pozvano predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
228.Buljan, Stipo; Jurković, Zoran; Jurković, Milan; Đukić, HimzoOptimization of the Results of Deep Drawing Explosion by Using the Taguchi Method // Development and Modernization of Production / Karabegović, Isak ; Jurković, Milan ; Doleček, Vlatko (ur.).
Bihać: Faculty of Technical Engineering, 2009. str. 255-256 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
229.Sekulić, Milenko; Gostimirović, Marin; Jurković, Zoran; Kovač, PavelCalibration of Cutting Force Coefficients in Face Milling // Development and Modernization of Production / Karabegović, Isak ; Jurković, Milan ; Doleček, Vlatko (ur.).
Bihać: Faculty of Technical Engineering, 2009. str. 17-18 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
230.Jurković, Zoran; Brezočnik, Miran; Sekulić, MilenkoModeliranje procesa obrade rezanjem primenom genetskih algoritama // 33rd Conference on Production Engineering of Serbia 2009 / Tanović, Lj (ur.).
Beograd: Faculty of Mechanical Engineering, 2009. str. 199-202 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
231.Buljan, Stipo; Dukić, Himzo; Jurković, ZoranGenetic Modeling of Explosion-Induced Deep Drawing Process // Trends in the Development of Machinery and Associated Technology-TMT 2008 / Ekinović, S. ; Yalcin, S. ; Vivancos, J. (ur.).
Zenica: Faculty of Mechanical Engineering, 2008. str. 181-184 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
232.Jurković, Milan; Jurković, Zoran; Mahmić, Mehmed; Karabegović, EdinaMachining and Manufacturing Systems Evolution // Trends in the Development of Machinery and Associated Technology-TMT 2008 / Ekinović, S. ; Yalcin, S. ; Vivancos, J. (ur.).
Zenica: Faculty of Mechanical Engineering, Zenica, 2008. str. 85-88 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
233.Krizek, Željko; Jurković, Zoran; Brezočnik, MiranAnalytical Study of Different Approaches to Determine Optimal Cutting Force Model // Trends in the Development of Machinery and Associated Technology-TMT 2008 / Ekinović, S. ; Yalcin, S. ; Vivancos, J. (ur.).
Zenica: Faculty of Mechanical Engineering, Zenica, 2008. str. 21-24 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
234.Jurković, Zoran; Cukor, Goran; Meštrović, TomislavDetermination of optimal cutting parameters to improve surface roughness based on different optimization approaches // AMST'05 Advanced Manufacturing Systems and Technology : Proceedings of the Seventh International Conference / Kuljanić, Elso (ur.).
Udine: CISM, 2008. str. 105-110 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
235.Jurković, Milan; Jurković, ZoranMachine Tools and Machining Systems Evolution // Machine Design / Kuzmanović, Siniša (ur.)., 2008. str. 329-334
-
236.Željko Križek; Zoran Jurković; Miran BrezočnikAnalytical Study of Different Approaches to Determine Optimal Cutting Force Model // Archives of Materials Science, 28 (2007), 1-4; 69-74 (podatak o recenziji nije dostupan, članak, znanstveni)
-
237.Karabegović, Edina; Jurković, Milan; Jurković, ZoranTheoretical Analysis of Hydroforming of Tubes // The 3rd International Conference - MSE 2007 / Duse, D. M. & Brindasu, P. D. (ur.).
Sibiu: Faculty of Engineering, University of Sibiu, 2007. str. 123-124 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
238.Mahmić, Mehmed; Jurković, Zoran; Jurković, MilanTehno-ekonomska opravdanost primjene tehnologije brze izrade // Development and Modernization of Production / Karabegović, I. ; Jurković, M. ; Doleček, V. (ur.).
Bihać: University of Bihać, Faculty of Technical Engineering, 2007. str. 25-26 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
239.Karabegović, Edina; Jurković, Milan; Jurković, ZoranEksperimentalni uređaj za analizu parametara procesa hidrooblikovanja cijevi // Development and Modernization of Production / Karabegović, I. ; Jurković, M. ; Doleček, V. (ur.).
Bihać: University of Bihać, Faculty of Technical Engineering, 2007. str. 23-24 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
240.Grizelj, Branko; Jurković, Zoran; Šolto Grizelj, Vilma;Simulation of process in metal forming // RIM 2007 - 6th International Scienticifc Conference on Production Engineering (ROM 2007) : proceedings / Karabegović, Isak ; Jurković, Milan ; Doleček, Vlatko (ur.).
Sarajevo, 2007. str. 1-6 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
241.Jurković, Milan; Karabegović, Edina; Jurković, Zoran; Mahmić, MehmedTheoretical Analysis of the Tube Hydroforming Process Parameters and a Suggestion for Experimental Equipment // Trends in the Development of Machinery and Associated Technology-TMT 2007 / Ekinović, S. ; Yalcin, S. ; Vivancos, J. (ur.).
Zenica, 2007. str. 83-86 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
242.Jurković, Milan; Brezočnik, Miran; Jurković, Zoran; Mahmić, MehmedStochastic and Genetic Modelling of Tool Life // Trends in the Development of Machinery and Associated Technology-TMT 2007 / Ekinović, S. ; Yalcin, S. ; Vivancos, J. (ur.).
Zenica, 2007. str. 75-78 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
243.Karabegović, Edina; Jurković, Milan; Jurković, ZoranTheoretical Analysis of Hydroforming of Tubes // Academic Journal of Manufacturing Engineering, 3 (2007), 58-62 (podatak o recenziji nije dostupan, članak, znanstveni)
-
244.Jurković, ZoranModeliranje i optimizacija parametara obrade primjenom evolucijskih algoritama kod inteligentnih obradnih sustava, 2007., doktorska disertacija, Tehnički fakultet, Rijeka
-
245.Jurković, Zoran; Jurković, Milan; Brezočnik, Miran; Buljan, StipoExtrusion Parameters Determination Based on Different Optimization Approaches // Journal for Technology of Plasticity, 31 (2006), 1-2; 79-89 (podatak o recenziji nije dostupan, članak, znanstveni)
-
246.Jurković, Milan; Karabegović, Edina; Jurković, ZoranFormability Limit of Materials in the Hydroforming Processes // Trends in the Development of Machinery and Associated Technology-TMT 2006
Barcelona : Zenica, 2006. str. 117-120 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
247.Buljan, Stipo; Dukić, Himzo; Jurković, ZoranImpact Wave Pressure Modeling in the Explosion Based Deep-Drawing Process // Trends in the Development of Machinery and Associated Technology-TMT 2006
Barcelona : Zenica, 2006. str. 117-180 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
248.Buljan, Stipo; Jurković, Milan; Jurković, ZoranCalculation of Dynamicity Coefficient in Explosive-Induced Deep Drawing // Advanced Technologies for Developing Countries – ; ; ; ATDC 2006 / Mikac Tonči ; Katalinić, Branko (ur.).
Rijeka: Tehnički fakultet & DAAAM, 2006. str. 165-170 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), ostalo) -
249.Buljan, Stipo; Jurković, Milan; Jurković, ZoranMarket Challenges // Proceedings 9th International Scientific Conference - MMA 2006 – ; ; Fleksible technologies
Novi Sad, 2006. str. 87-88 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), stručni) -
250.Jurković, Milan; Jurković, Zoran; Buljan, StipoThe Tribological State Test in Metal Forming Processes Using Experiment and Modelling // Journal of Achievements in Materials and Manufacturing Engineering, 18 (2006), 1-2; 383-386 (podatak o recenziji nije dostupan, članak, znanstveni)
