Pregled po CROSBI profilu: Hrvoje Rafael (CROSBI Profil: 10677, MBZ: 316920)
Pronađeno 17 radova
-
1.Cajner, Franjo; Landek, Darko; Rafael, Hrvoje; Jačan, Jurica; Bogdanić, DinoWear resistance of TiN/TiCN and TiN/Ti-B-N multilayers coatings fabricated by the pulsed DC PACVD process on k390 mc cold work tool steel // Proceedings of the European Conference on Heat Treatment 2015 & 22nd IFHTSE Congress
Milano: Associazone Italiana di Metallurgia, 2015. (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
2.Cajner, Franjo; Kovačić, Saša; Rafael, Hrvoje; Vugrinčić, Amalija; Šimunović, Vinko; Gržeta, BiserkaInfluence of nitriding on corrosion resistance of martensitic X17CrNi16-2 stainless steel // Materialwissenschaft und Werkstofftechnik, 46 (2015), 1; 69-77 doi:10.1002/mawe.201400386 (međunarodna recenzija, članak, znanstveni)
-
3.Johnson S; Stojanovic J; Ariceta G, Bitzan M; Besbas N; Frieling M; Karpman D; Landau D; Langman C; Licht C; Pecoraro C et al.An audit analysis of a guideline for the investigation and initial therapy of diarrhea negative (atypical) hemolytic uremic syndrome // Pediatric nephrology, 29 (2014), 1967-1978 doi:10.1007/s00467-014-2817-4 (međunarodna recenzija, pregledni rad, znanstveni)
-
4.Cajner, Franjo; Landek, Darko; Kumić, Ivan; Kovačić, Saša; Rafael, HrvojeTribological and microstructural investigations of the influence of deep cryogenic treatment on the properties of PM S390 MC high speed steel // Proceedings of European Conference on Heat Treatment and 21st IFHTSE Congress / Zoch, Hans-Werner ; Schneider, Reinhold ; Lübben, Thomas (ur.).
München: Arbeitsgemeinschaft Wärmbehandlung und Werkstofftechnik e. V. (AWT), 2014. str. 459-466 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
5.Cajner, Franjo; Landek, Darko; Cajner, Hrvoje; Rafael, Hrvoje; Kovačić, SašaCharacteristics of Warm Baths for the quenching of Tool Steels // Conference Proceedings of 9th International Conference on Industrial Tools and Material Processing Technologies / Hančič, Aleš ; Grum, Janez ; Gantar, Gašper ; Pulko, Irena (ur.).
Ljubljana: TECOS – Slovenian Tool and Die Development Center, 2014. str. 207-214 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
6.Landek, Darko; Cajner, Franjo; Rafael, Hrvoje; Ćavar, AntonioEffect of Application of Deep-cryogenic Treatment on the Pproperties of High Speed Steel PM S390 MC // Conference Proceedings of 9th International Conference on Industrial Tools and Material Processing Technologies / Hančič, Aleš ; Grum, Janez ; Gantar, Gašper ; Pulko, Irena (ur.).
Ljubljana: TECOS – Slovenian Tool and Die Development Center, 2014. str. 191-196 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
7.Cajner, Franjo; Kovačić, Saša; Rafael, Hrvoje; Vugrinčić, Amalija; Šimunović, VinkoInfluence of nitriding on corrosion resistance of martensitic X17CrNi16-2 stainless steel // 2nd Mediterranean Conference & New Chalenges on Heat Treatment and Surface Engineering - Proceedings / Smoljan, Božo ; Matijević, Božidar (ur.).
Zagreb: Hrvatsko društvo za toplinsku obradu i inženjerstvo površina, 2013. str. 127-132 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
8.Landek, Darko; Cajner, Franjo; Rafael, Hrvoje; Kovačić, SašaInfluence of heat treatment parameters on the mechanical properties and wear resistance of hs10-2-5-8 high speed steel // The proceedings of 2nd mediterranean conference & new challenges on heat treatment and surface engineering / Smoljan, Božo ; Matijević, Božidar (ur.).
Zagreb: CSHTSE, 2013. str. 293-300 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
9.Cajner, Franjo; Landek, Darko; Kumić, Ivan; Vugrinčić, AmalijaInfluential factors in the surface hardness testing of a nitrided layer // Materiali in tehnologije, 47 (2013), 4; 531-533 doi:UDK 621.785.53:519.233.4 (međunarodna recenzija, članak, znanstveni)
-
10.Cajner, Franjo; Landek, Darko; Rafael, Hrvoje; Kovačić, SašaEffect of the heating rate in the tempering of EN 100 V1 // Journal of heat treatment and materials, 67 (2012), 2; 118-124 doi:HT110145 (međunarodna recenzija, članak, znanstveni)
-
11.Cajner, Franjo; Landek, Darko; Rafael, Hrvoje; Šolić, Sanja; Kovačić, SašaEffect of deep cryogenic treatment on dilatometric curve and tribological properties of high speed steel // International heat treatment and surface engineering, 6 (2012), 2; 67-71 doi:10.1179/1749514812Z.00000000018 (međunarodna recenzija, članak, znanstveni)
-
12.Cajner, Franjo; Landek, Darko; Rafael, Hrvoje; Šolić, Sanja; Kovačić, SašaEffect of deep cryogenic treatment on dilatometric curve and tribological properties of high speed steel // Proceeding of The 19th IFHTSE Congress
Glasgow: IFHTSE, 2011. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
13.Cajner, Franjo; Landek, Darko; Rafael, Hrvoje; Kovačić, SašaEffect of the heating rate in the tempering of steel grade EN 100 V1 // Proceedings of the 3rd International IFHTSE Conference on “Heat Treatment and Surface Engineering of Tools and Dies” / Schneider, Reinhold S. E. (ur.).
Wels: ASMET, 2011. str. 160-168 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
14.Cajner, Franjo; Landek, Darko; Rafael, HrvojeUsing salt bath nitrocarburizing with post-oxidation for achieving better properties of steel parts // Journal of Engineering and Technology, 1 (2010), 1; 1-9 (podatak o recenziji nije dostupan, članak, znanstveni)
-
15.Šolić, Sanja; Cajner, Franjo; Leskovšek, Vojteh; Rafael, HrvojeUtjecaj parametara toplinske obrade na svojstva brzoreznog čelika PM S390 MC // Zbornik sažetaka MATRIB 2010 / Schauperl, Z. ; Šnajdar, M. (ur.).
Zagreb: Hrvatsko društvo za materijale i tribologiju (HDMT), 2010. str. 436-443 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
16.Cajner, Franjo; Landek, Darko; Rafael, HrvojeUsing salt bath nitrocarburizing with post-oxidation for achieving better properties of steel parts // Proceedings of 10th International Scientific Conference New Ways in Manufacturing Technologies / Monka, Peter ; Monkova, Katarina (ur.).
Prešov: Technical University of Košice & Faculty of Manufacturing Technologies, 2010. str. 85-94 (pozvano predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
17.Rafael, HrvojeAnaliza udarnih oštećenja pretkrilca velikog putničkog zrakoplova, 2008., diplomski rad, diplomski, Fakultet strojarstva i brodogradnje, Zagreb
