Pregled po CROSBI profilu: Ivan Jandrlić (CROSBI Profil: 30743, MBZ: 330706, ORCID: 0000-0001-6683-6108)
Pronađeno 63 radova
-
1.Utjecaj brzine razvlačenja na pojavu Portevin-Le Chatelier efekta kod AlMg legure, 2023., diplomski rad, Metalurški fakultet, Sisak
-
2.Karakteristike pojave Portevin-Le Chatelier efekta kod AlMg legura tijekom hladne deformacije, 2022., diplomski rad, Metalurški fakultet, Sisak
-
3.Analytical approach to crack tip plasticity of dental CoCrMo alloy // Machines, Technologies, Materials, 16 (2022), 7; 248-250 (međunarodna recenzija, članak, znanstveni)
-
4.Analytical approach to crack tip plasticity of dental CoCrMo alloy // Machines. Technologies. Materials 2022. Proceedings, Volume III, Machines. Materials. / Popov, Georgi (ur.).
Sofija: Scientific Technical Union of Mechanical Enfineering Industry-4.0, 2022. str. 226-228 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
5.Changes in structure and properties of copper wire during the production and processing // Abstract Proceedings 62nd IFC Portorož 2022 / Jan-Blažič, Mrjam (ur.).
Ljubljana: Tisk Fleks d.o.o., 2022. 41, 13 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
6.Stress distribution at different deformation degrees in low carbon steel during cold deformation // Engineering review (Technical Faculty University of Rijeka), 42 (2022), 1; 103-108 doi:10.30765/er.1745 (međunarodna recenzija, članak, znanstveni)
-
7.Numerical analysis of metallographic preparation effect on the hardness of titanium alloy // Machines. Technologies. Materials., 16 (2022), 2; 66-69 (međunarodna recenzija, članak, znanstveni)
-
8.Numerical analysis of metallographic preparation effect on the hardness of titanium alloy // Machines. Technologies. Materials 2022. Proceedings, Volume I, Machines. Materials. / Popov, Georgi (ur.).
Sofija: Scientific Technical Union of Mechanical Enfineering Industry-4.0, 2022. str. 77-80 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
9.Kontrola zavara pri izradi distributora izmjenjivača topline nedestruktivnim metodama ispitivanja, 2021., diplomski rad, preddiplomski, Metalurški fakultet, Sisak
-
10.Utjecaj deformacije i toplinske obrade na strukturu hladno vučene bakrene žice, 2021., diplomski rad, diplomski, Metalurški fakultet, Sisak
-
11.Mehanička svojstva različitih željeznih ljevova, 2021., diplomski rad, preddiplomski, Metalurški fakultet, Sisak
-
12.Application of thermography in determining the proportionality limit // Conference proceedings of 11th International scientific-professional conference SBW 2021 „Engineering technologies in manufacturing of welded constructions and products, SBW 2021“ / Samardžić, Ivan ; Duspara, Miroslav ; Marić, Dejan (ur.).
Slavonski Brod: University of Slavonski Brod, Mechanical Engineering Faculty in Slavonski Brod, 2021. str. 15-18 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
13.ANALYSIS OF THE CRACK FORMATION IN ASIS M2 HIGH- SPEED TOOL STEEL DURING UTILIZATION // Proceedings book of 19th International Foundrymen Conference / Dolić, Natalija ; Zovko Brodarac, Zdenka ; Brajčinović Sandra (ur.).
Sisak: Metalurški fakultet Sveučilišta u Zagrebu, 2021. str. 345-361 (poster, međunarodna recenzija, cjeloviti rad (in extenso), stručni) -
14.Influence of cold reduction on the structure and hardness of cold drawn copper wire // 19th INTERNATIONAL FOUNDRYMEN CONFERENCE Humans - Valuable Resource for Foundry Industry Development / Dolić, Natalija ; Zovko Brodarac, Zdenka ; Brajčinović, Sandra (ur.).
Sisak: Metalurški fakultet Sveučilišta u Zagrebu, 2021. str. 314-324 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
15.Chemical preparation of tubes before cold drawing // Proceedings book of 2nd International Conference „The Holistic Approach to Environment“ Virtual Conference 2021. / Štrkalj, Anita ; Glavaš, Zoran (ur.).
Sisak: Udruga za promicanje cjelovitog pristupa okolišu, 2021. str. 534-542 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
16.Primjena termografije u optimiranju visokotlačnog lijevanja, 2020., diplomski rad, preddiplomski, Metalurški fakultet, Sisak
-
17.Strukturne promjene pri izvlačenju bakrene žice, 2020., diplomski rad, preddiplomski, Metalurški fakultet, Sisak
-
18.Effects of preferred grain orientation on the on lüders bands appearance // Metalurgija, 59 (2020), 1; 59-62 (međunarodna recenzija, članak, znanstveni)
-
19.Influence of Niobium Content on Strain Amount in Lüders Bands in Niobium Microalloyed Steel // Metals and materials international, 26 (2020), 2; 179-187 doi:10.1007/s12540-019-00336-w (međunarodna recenzija, članak, znanstveni)
-
20.Influence of Strip Cooling Rate on Lüders Bands Appearance During Subsequent Cold Deformation // New Technologies, Development and Application II / Karabegović, Isak (ur.).
Cham: Springer, 2020. str. 115-121 doi:10.1007/978-3-030-18072-0_12 -
21.Analiza svojstava zavarenog niskougljičnog čelika, 2019., diplomski rad, preddiplomski, Metalurški fakultet, Sisak
-
22.The influence of niobium precipitates in the cold drawing pipe // Conference proceedings METAL 2019 / Different Authors (ur.).
Ostrava: 2019 Tanger, Ltd, 2019. str. 102-102 (poster, međunarodna recenzija, prošireni sažetak, znanstveni) -
23.Study on strengthening during cold drawing of steel tubes // Proceedings of 9th International Conference Mechanical Technologies and Structural Materials 2019 / Jozić, Sonja ; Lela, Branimir (ur.).
Split: Hrvatsko društvo za strojarske tehnologije, 2019. str. 83-88 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
24.Long Term Environmental Threats from Worldwide Industrial Waste // Proceedings of the XIII th International Conference "Preparation of Ceramic Materials" / Plešingerova, Beatrice ; Medved, David (ur.).
Košice: Tehnical university of Košice, Faculty of Materials, Metallurgy and Recycling, 2019. str. 202-203 (poster, međunarodna recenzija, sažetak, znanstveni) -
25.Modeling of stress distribution on the basis of the measured values of strain and temperature changes // AIMS Materials Science, 6 (2019), 4; 601-609 doi:10.3934/matersci.2019.4.601 (međunarodna recenzija, članak, znanstveni)
