Pregled po ustanovi: Tehnički fakultet, Rijeka (MB: 69)

683.

Smoljan, Božo; Iljkić, Dario; Tomašić, Neven

Computer simulation of microstructure of quenched moulding die // Archives of Materials Science and Engineering, 68 (2014), 2; 81-86 (međunarodna recenzija, članak, znanstveni)

684.

Lerga, Jonatan; Franušić, Marino; Sučić, Viktor

Parameters Analysis for the Time-Varying Automatically Adjusted LPA Based Estimators // Journal of automation and control engineering., 2 (2014), 3; 203-208 doi:10.12720/joace.2.3.203-208 (podatak o recenziji nije dostupan, članak, znanstveni)

doi www.joace.org www.joace.org

685.

Grljušić, Mirko; Medica, Vladimir; Račić, Nikola

Thermodynamic Analysis of a Ship Power Plant Operating with Waste Heat Recovery through Combined Heat and Power Production // Energy (Oxford), 7 (2014), 11; 7368-7394 doi:10.3390/en7117368 (međunarodna recenzija, članak, znanstveni)

doi www.mdpi.com

686.

Prpić-Oršić, Jasna; Parunov, Joško; Šikić, Igor

Operation of ULCS - real life // International Journal of Naval Architecture and Ocean Engineering, 6 (2014), 4; 1014-1023 doi:10.2478/IJNAOE-2013-0228 (međunarodna recenzija, članak, znanstveni)

doi dx.doi.org www.sciencedirect.com

687.

Sučić, Viktor; Saulig, Nicoletta; Boashash, Boualem

Analysis of local time-frequency entropy features for nonstationary signal components time supports detection // Digital signal processing, 34 (2014), 56-66 doi:10.1016/j.dsp.2014.07.013 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com dx.doi.org

688.

Štimac, Goranka; Braut, Sanjin; Žigulić, Roberto

Comparative Analysis of PSO Algorithms for PID Controller Tuning // Chinese Journal of Mechanical Engineering, 27 (2014), 5; 928-936 doi:10.3901/CJME.2014.0527.302 (međunarodna recenzija, članak, znanstveni)

doi link.springer.com

689.

Bosner, Tina; Crnković, Bojan; Škifić, Jerko

Tension spline with application on image resampling // Mathematical communications, 19 (2014), 3; 517-529 (međunarodna recenzija, članak, znanstveni)

hrcak.srce.hr www.mathos.unios.hr hrcak.srce.hr

690.

Lanc, Domagoj; Bukša, Mario; Brnić, Josip

Finite element simulation of thin-walled beam type-structure buckling under creep regime // Machines, Technologies, Materials, 2 (2014), 11-14 (podatak o recenziji nije dostupan, članak, znanstveni)

www.mech-ing.com

691.

Prpić-Oršić, Jasna; Slapničar, Vedran; Turk, Anton

Berth operability estimation related to ship motion // Transactions of FAMENA, 38 (2014), 1; 13-25 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada famena.fsb.unizg.hr

692.

Čarija, Zoran; Franković, Bernard; Perčić, Marko; Čavrak, Marko

Heat transfer analysis of fin-and-tube heat exchangers with flat and louvered fin geometries // International journal of refrigeration, 45 (2014), 160-167 doi:10.1016/j.ijrefrig.2014.05.026 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

693.

Ivošević, Tatjana; Mandić, Luka; Orlić, Ivica; Stelcer, Eduard; Cohen, David

Comparison between XRF and IBA techniques in analysis of ﬁne aerosols collected in Rijeka, Croatia // Nuclear Instruments and Methods in Physics Research. B, 337 (2014), 83-89 doi:10.1016/j.nimb.2014.07.020 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

694.

Čanađija, Marko; Guo, Xuefeng; Lanc, Domagoj; Yang, Wenpeng; Brnić, Josip

Low cycle fatigue and mechanical properties of magnesium alloy Mg–6Zn–1Y–0.6Ce–0.6Zr at different temperatures // Materials & design, 59 (2014), 287-295 doi:10.1016/j.matdes.2014.03.001 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com ac.els-cdn.com

695.

Sekulić, Milenko; Kovač, Pavel; Gostimirović, Marin; Hadžistević, Miodrag; Jurković, Zoran

PREDICTION OF THE MAIN CUTTING FORCE IN DRILLING BY KIENZLE EQUATION // Journal of trends in the development of machinery and associated technology, 18 (2014), 1; 27-30 (podatak o recenziji nije dostupan, članak, znanstveni)

Pristup cjelovitom tekstu rada www.tmt.unze.ba

696.

Jurković, Milan; Jurković, Zoran; Cukor, Goran; Brezočnik, Miran; Sekulić, Milenko

Application of Modeling and Simulation in Reengineering of Manufacturing Processes // Journal of trends in the development of machinery and associated technology, 18 (2014), 1; 63-66 (podatak o recenziji nije dostupan, članak, znanstveni)

Pristup cjelovitom tekstu rada www.tmt.unze.ba

697.

Ljubic, Sandi; Glavinic, Vlado; Kukec, Mihael

Predicting upper-bound text entry speeds for discrete-tilt-based input on smartphones // Journal of interaction science, 2 (2014), 3. doi:10.1186/s40166-014-0003-6 (podatak o recenziji nije dostupan, članak, znanstveni)

doi www.journalofinteractionscience.com www.journalofinteractionscience.com

698.

Marunić, Gordana; Glažar, Vladimir

Multimedia Learning and Engineering Students Spatial Ability // Machine Design (Novi Sad), 6 (2014), 2; 35-40 (podatak o recenziji nije dostupan, članak, znanstveni)

www.mdesign.ftn.uns.ac.rs

699.

Siminiati, D.

LOSSES ON HYDROSTATIC LUBRICATION IN WATER HYDRAULIC AXIAL PISTON MACHINES // Advanced engineering, 7 (2014), 125-132 (podatak o recenziji nije dostupan, članak, znanstveni)

700.

Brestovac, Goran; Marin, Dea; Oroz, Tara; Vidović, Aleksandar; Bozóki, Szilárd; Grgurić, Andrej; Mošmondor, Miran; Galinac Grbac, Tihana

Ambient orchestration in assisted environment // Engineering review : znanstveni časopis za nove tehnologije u strojarstvu, brodogradnji i elektrotehnici, 34 (2014), 2; 119-129 (međunarodna recenzija, članak, znanstveni)

er.riteh.hr er.riteh.hr

701.

Galinac Grbac, Tihana; Car, Željka; Huljenić, Darko

A quality cost reduction model for large-scale software development // Software quality journal, 23 (2014), 2; 363-390 doi:10.1007/s11219-014-9240-8 (međunarodna recenzija, članak, znanstveni)

doi link.springer.com

702.

Katić, Višnja; Kamenar, Ervin; Blažević, David; Špalj, Stjepan

Geometrical design characteristics of orthodontic mini-implants predicting maximum insertion torque // Korean Journal of Orthodontics, 44 (2014), 4; 177-183 doi:10.4041/kjod.2014.44.4.177 (međunarodna recenzija, članak, znanstveni)

doi e-kjo.org doi.org

703.

Brnić, Josip; Turkalj, Goran; Čanađija, Marko

Mechanical Testing of the Behavior of Steel 1.7147 at Different Temperatures // Steel and composite structures, 17 (2014), 5; 549-560 doi:10.12989/scs.2014.17.5.549 (međunarodna recenzija, članak, znanstveni)

doi technopress.kaist.ac.kr

704.

Brnić, Josip; Turkalj, Goran; Kršćanski, Sanjin; Lanc, Domagoj; Čanađija, Marko; Brčić, Marino

Information relevant for the design of structure : Ferritic – Heat resistant high chromium steel X10CrAlSi25 // Materials and design, 63 (2014), 508-518 doi:10.1016/j.matdes.2014.06.051 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

705.

Brnić, Josip; Turkalj, Goran; Čanađija, Marko; Niu, Jitai

Experimental determination and prediction of the mechanical properties of steel 1.7225 // Materials science and engineering : a structural materials : properties, microstructure and processing, 600 (2014), 47-52 doi:10.1016/j.msea.2014.01.097 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

706.

Brnić, Josip; Turkalj, Goran; Lanc, Domagoj; Čanađija, Marko; Brčić, Marino; Vukelić, Goran

Comparison of material properties: Steel 20MnCr5 and similar steels // Journal of constructional steel research, 95 (2014), 81-89 doi:10.1016/j.jcsr.2013.11.024 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

707.

Delač, Boris; Trp, Anica; Lenić, Kristian

Numerical investigation of heat transfer enhancement in a fin and tube heat exchanger using vortex generators // International journal of heat and mass transfer, 78 (2014), 662-669 doi:10.1016/j.ijheatmasstransfer.2014.07.027 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

708.

Brnić, Josip; Turkalj, Goran; Niu, Jitai; Čanađija, Marko; Lanc, Domagoj

Significance of Experimental Data in the Design of Structures Made from 1.4057 Steel // Journal of Wuhan University of Technology-Mater. Sci. Ed., 29 (2014), 1; 131-136 doi:10.1007/s11595-014-0880-0 (međunarodna recenzija, članak, znanstveni)

doi www.springer.com

709.

Marunić, Gordana; Glažar, Vladimir

Improvement and assessment of spatial ability in engineering education // Engineering review : znanstveni časopis za nove tehnologije u strojarstvu, brodogradnji i elektrotehnici, 34 (2014), 2; 139-150 (međunarodna recenzija, pregledni rad, znanstveni)

710.

Kukec, Mihael; Glavinic, Vlado; Ljubic, Sandi

Measuring the Effect of First Encounter with Source Code Entry for Instruction Set Architectures Using Touchscreen Devices: Evaluation of Usability Components // Lecture Notes in Computer Science, 8514 (2014), 358-369 doi:10.1007/978-3-319-07440-5_33 (međunarodna recenzija, članak, znanstveni)

doi link.springer.com

711.

Ljubic, Sandi; Glavinic, Vlado; Kukec, Mihael

Effects of Interaction Style and Screen Size on Touchscreen Text Entry Performance: An Empirical Research // Lecture Notes in Computer Science, 8514 (2014), 68-79 doi:10.1007/978-3-319-07440-5_7 (međunarodna recenzija, članak, znanstveni)

doi link.springer.com

712.

Marasović, Ivan; Milanović, Željka; Betti, Tihomir

Resistance Fluctuations in GaAs Nanowire Grids // Journal of nanomaterials, 2014 (2014), 428390-1 doi:10.1155/2014/428390 (međunarodna recenzija, članak, znanstveni)

doi www.hindawi.com dx.doi.org

713.

Jonatan Lerga; Edi Grbac; Viktor Sučić

An ICI Based Algorithm for Fast Denoising of Video Signals // Automatika : časopis za automatiku, mjerenje, elektroniku, računarstvo i komunikacije, 55 (2014), 3; 351-358 doi:10.7305/automatika.2014.12.525 (međunarodna recenzija, članak, znanstveni)

doi automatika.korema.hr automatika.korema.hr

714.

Lanc, Domagoj; Turkalj, Goran; Pešić, Igor

Global buckling analysis model for thin-walled composite laminated beam type structures // Composite structures, 111 (2014), 371-380 doi:10.1016/j.compstruct.2014.01.020 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

715.

Hrelja, Marko; Klančnik, Simon; Irgolič, Tomaž; Paulić, Matej; Jurković, Zoran; Balić, Jože; Brezočnik, Miran

Particle swarm optimization approach for modelling a turning process // Advances in production engineering & management, 9 (2014), 1; 21-30 doi:10.14743/apem2014.1.173 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada doi apem-journal.org apem-journal.org

716.

Ogrizović, Dario; Car, Zlatan; Kovačić, Božidar

Scientific Applications in Cloud Computing // The IPSI BGD Transactions on Advanced Research, 10 (2014), 1; 27-33 (podatak o recenziji nije dostupan, članak, znanstveni)

ipsitransactions.org

717.

Delač, Boris; Prelec, Zmagoslav; Pavković, Branimir

Tehnološka, ekonomska i ekološka analiza zamjene energenta u bolničkom energetskom sustavu // KGH. Klimatizacija, grejanje, hlađenje, 43 (2014), 1; 93-100 (podatak o recenziji nije dostupan, članak, znanstveni)

718.

Mujaković, Nermina; Dražić, Ivan

3-D flow of a compressible viscous micropolar fluid with spherical symmetry: uniqueness of a generalized solution // Boundary value problems, 2014 (2014), 226, 17 doi:10.1186/s13661-014-0226-z (međunarodna recenzija, članak, znanstveni)

doi link.springer.com link.springer.com

719.

Štimac, Goranka; Braut, Sanjin; Žigulić, Roberto

Optimization of the machine foundation using frequency constraints // Structural and multidisciplinary optimization, 50 (2014), 1; 147-157 doi:10.1007/s00158-014-1052-8 (međunarodna recenzija, članak, znanstveni)

doi link.springer.com www.springerlink.com

720.

Sučić, Viktor; Lerga, Jonatan; Boashash, Boualem

Multicomponent Noisy Signal Adaptive Instantaneous Frequency Estimation Using Components Time Support Information // IET signal processing, 8 (2014), 3; 277-284 doi:10.1049/iet-spr.2013.0349 (međunarodna recenzija, članak, znanstveni)

doi digital-library.theiet.org dx.doi.org

721.

Troha, Sanjin; Žigulić, Roberto; Karaivanov, Dimitar

Kinematic operating modes of two-speed two-carrier planetary gear trains with four external shafts // Transactions of FAMENA, 38 (2014), 1; 63-76 (međunarodna recenzija, članak, znanstveni)

722.

Zamarin, Albert; Matulja, Tin; Hadjina, Marko

Methodology for Optimal Mast and Standing Rigging Selection of a Racing Yacht using AHP and FEM // Brodogradnja, 64 (2013), 1; 11-21 (međunarodna recenzija, članak, znanstveni)

hrcak.srce.hr

723.

Obsieger, Boris; Obsieger, Josip

Design of Gear Pumps With Reduced Flow Fluctuation // Advanced engineering, 7 (2013), 101-106 (podatak o recenziji nije dostupan, članak, znanstveni)

724.

Pomenić, Loreta; Jurac, Zlatko

The influence of mthyl esters on viscosity of biodiesel from waste and rapeseed oil blends // Archives of Materials Science and Engineering, 62 (2013), 2; 73-77 (međunarodna recenzija, članak, znanstveni)

725.

Jurac, Zlatko; Pomenić, Loreta

Impact of residual glycerides on viscosity of biodiesel(waste and rapeseed oil blends) // Journal of Achievements in Materials and Manufacturing Engineeringts, 59 (2013), 2; 75-79 (podatak o recenziji nije dostupan, članak, znanstveni)

726.

Matulja, Tin; Bogdanović, Miroslav; Udovičić, Nickol

SELECTION OF THE RACING MULTIHULL SAILING BOAT EQUIPMENT BY THE AHP METHOD – A CASE STUDY // Pomorstvo : journal of maritime studies, 27 (2013), 2; 313-324 (podatak o recenziji nije dostupan, prethodno priopćenje, znanstveni)

727.

Barborak, Oto; Stodola, Jiri; Jurković, Zoran

Operation Reliability and Diagnostics of Complex Mechanical Systems // Strojarstvo : časopis za teoriju i praksu u strojarstvu, 55 (2013), 3; 189-195 (međunarodna recenzija, članak, znanstveni)

728.

Tomić, Mladen; Seršić, Damir

Point-Wise Adaptive Wavelet Transform for Signal Denoising // Informatica, 24 (2013), 4; 637-656 doi:10.15388/Informatica.2013.08 (međunarodna recenzija, članak, znanstveni)

doi content.iospress.com

729.

Škifić, Jerko; Radošević, Adrijana; Brajković, Đani; Družeta, Siniša; Čavrak, Marko

Numerical simulations of hydraulic transients in hydropower plant Jajce II // Engineering review : znanstveni časopis za nove tehnologije u strojarstvu, brodogradnji i elektrotehnici, Vol 33 (2013), No.1 (2013); 51-56 (podatak o recenziji nije dostupan, članak, znanstveni)

730.

Micev, Goran; Mrakovčić, Tomislav

Analysis of the ship piping installation effect on the mounting and operation of pumps // Pomorstvo : journal of maritime studies, 27 (2013), 1; 21-37 (podatak o recenziji nije dostupan, prethodno priopćenje, znanstveni)

731.

Marunić, Gordana

CONTRIBUTION OF GEAR BODY TO TOOTH DEFORMATION // Machines, Technologies, Materials, 4 (2013), 7-10 (podatak o recenziji nije dostupan, članak, znanstveni)

732.

Matulja, Dunja; Dejhalla, Roko

Optimization of the Ship Hull Hydrodynamic Characteristics in Calm Water // Brodogradnja, 4/2013 (2013), 425-436 (međunarodna recenzija, članak, znanstveni)

http

733.

Pavković, Branimir

Refrigerants - Part 2: Past, present and future perspectives of refrigerants in air-conditioning applications // Rehva Journal, 50 (2013), 6; 28-33 (podatak o recenziji nije dostupan, članak, znanstveni)

734.

Pavković, Branimir

Refrigerants - Part 1: Properties and air - conditioning applications // Rehva Journal, 50 (2013), 5; 7-11 (podatak o recenziji nije dostupan, članak, znanstveni)

735.

Brčić, Marino; Čanađija, Marko; Brnić, Josip

Multiscale Modeling of Nanocomposite Structures with Defects // Key engineering materials, 577-578 (2013), 141-144 doi:10.4028/www.scientific.net/KEM.577-578.141 (međunarodna recenzija, članak, znanstveni)

doi www.scientific.net

736.

Crnković, Dean; Rukavina, Sanja; Simčić, Loredana

Binary doubly-even self-dual codes of length 72 with large automorphism groups // Mathematical communications, 18 (2013), 2; 297-308 (međunarodna recenzija, članak, znanstveni)

737.

Smoljan, Božo; Iljkić, Dario; Pomenić, Loreta

Input physical properties in mathematical model of steel quenching // Journal of achievements in materials and manufacturing engineering, 58 (2013), 2; 81-86 (podatak o recenziji nije dostupan, članak, znanstveni)

738.

Bulat, Hrvoje; Skok, Srđan; Kirinčić, Vedran

Synchronized phasor measurements in a dual layer hybrid state estimator = Sinkronizirana mjerenja fazora u dvoslojnom hibridnom procjenitelju stanja // Tehnički vjesnik, 20 (2013), 6; 1043-1050 (međunarodna recenzija, članak, znanstveni)

739.

Doboviček, Sandro; Mikac, Tonči; Damiani, Dani

Logical procedure for determining the appropriate method of calculating process capability // Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 20 (2013), 5; 739-746 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada

740.

Drasnar, Petr; Kudláček, Jan; Pepelnjak, Tomaž; Car, Zlatan; Pazderova, Martina

Zinc-Polytetrafluoroethylene (Zn-PTFE) Composite Coating with Exploitable Tribological Properties // Journal of engineering technology, 30 (2013), 1; 30-36 doi:http://connection.ebscohost.com/c/articles/87688065/zinc-polytetrafluoroethylene-zn-ptfe-composite-coating-exploitable-tribological-properties (podatak o recenziji nije dostupan, članak, znanstveni)

doi www.engtech.org

741.

Ikonić, Milan; Kostelac, Dražen; Mikac, Tonči

SELECTION OF KEY PERFORMANCE INDICATORS AS A KEY FOR SUCCESFULL IMPLEMENTATION OF EPPM-BSC MODEL IN PHARMACEUTICAL INDUSTRY // Machine Design (Novi Sad), 50 (2013), 2; 65-74 (podatak o recenziji nije dostupan, prethodno priopćenje, znanstveni)

742.

Štimac, Goranka; Braut, Sanjin; Bulić, Neven; Žigulić, Roberto

Modeling and experimental verification of a flexible rotor/AMB system // COMPEL : The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, 32 (2013), 4; 1244-1254 (međunarodna recenzija, članak, znanstveni)

www.emeraldinsight.com

743.

Brnić, Josip; Niu, Jitai; Turkalj, Goran; Čanađija, Marko; Lanc, Domagoj; Brčić, Marino; Kršćanski, Sanjin; Vukelić, Goran

Comparison of Material Properties and Creep Behavior of 20MnCr5 and S275JR Steels // Materials science forum, 762 (2013), 47-54 doi:10.4028/www.scientific.net/MSF.762.47 (podatak o recenziji nije dostupan, članak, znanstveni)

doi http

744.

Brnić, Josip; Turkalj, Goran; Kršćanski, Sanjin

Experimental Research and Analysis of Non-alloy Structural Steel Response Exposed to High Temperature Conditions // High temperature materials and processes, 32 (2013), 2; 163-169 doi:10.1515/htmp-2012-0108 (međunarodna recenzija, članak, znanstveni)

doi www.degruyter.com

745.

Kramar, Davorin; Sekulić, Milenko; Jurković, Zoran; Kopač, Janez

The Machinability of Nickel-Based Alloys in High-Pressure Jet Assisted (HPJA) Turning // Metalurgija, 52 (2013), 4; 512-514 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada

746.

Crnković, Dean; Rodrigues, Bernardo Gabriel; Rukavina, Sanja; Simčić, Loredana

Self-orthogonal codes from orbit matrices of 2- designs // Advances in mathematics of communications, 7 (2013), 2; 161-174 doi:10.3934/amc.2013.7.161 (međunarodna recenzija, članak, znanstveni)

doi www.aimsciences.org

747.

Smoljan, Božo; Iljkić, Dario; Traven, Furio

Mathematical modelling of mechanical properties of quenched and tempered steel // International heat treatment and surface engineering, 7 (2013), 1; 16-22 (međunarodna recenzija, članak, znanstveni)

748.

Smoljan, Božo; Iljkić, Dario; Pomenić, Loreta

Mathematical modelling and computer simulation of mechanical properties of quenched and tempered steel // International journal of microstructure and materials properties, 8 (2013), 1/2; 97-112 (podatak o recenziji nije dostupan, članak, znanstveni)

749.

Jemrić, Tomislav; Fruk, Goran

Postharvest quality of nectarine cv. ‘Venus’ as affected by hot water dips and length of storage // Agroznanje, 14 (2013), 1; 19-28 doi:10.7251/AGREN1301019J (podatak o recenziji nije dostupan, članak, znanstveni)

doi

750.

Blažević, David; Kamenar, Ervin; Zelenika, Saša

Load optimised piezoelectric generator for powering battery-less TPMS // Proceedings of SPIE, the International Society for Optical Engineering, 8763 (2013), 87631K-1 (podatak o recenziji nije dostupan, članak, znanstveni)

751.

Brčić, Marino; Čanađija, Marko; Brnić, Josip

Estimation of material properties of nanocomposite structures // Meccanica, 48 (2013), 9; 2209-2220 doi:10.1007/s11012-013-9738-3 (međunarodna recenzija, članak, znanstveni)

doi link.springer.com

752.

Čep, Robert; Janásek, Adam; Čepová, Lenka; Petrů, Jana; Hlavatý, Ivo; Car, Zlatan; Hatala, Michal

Experimental Testing of Exchangeable Cutting Inserts Cutting Ability // Tehnicki Vjesnik-Technical Gazette, 20 (2013), 1; 21-26 (međunarodna recenzija, članak, znanstveni)

753.

Čanađija, Marko; Brčić, Marino; Brnić, Josip

Bending behaviour of single-layered graphene nanosheets with vacancy defects // Engineering Review, 33 (2013), 1; 9-14 (međunarodna recenzija, članak, znanstveni)

er.riteh.hr er.riteh.hr

754.

Brnić, Josip; Turkalj, Goran; Lanc, Domagoj; Čanađija, Marko; Brčić, Marino; Vukelić, Goran; Munjas, Neven

Testing and Analysis of X39CrMo17-1 Steel Properties // Construction and building materials, 44 (2013), 293-301 (međunarodna recenzija, članak, znanstveni)

www.journals.elsevier.com

755.

Čanađija, Marko; Brčić, Marino; Brnić, Josip

A Finite element model for thermal dilatation of carbon nanotubes // Reviews on advanced materials science, 33 (2013), 1; 1-6 (međunarodna recenzija, članak, znanstveni)

www.ipme.ru

756.

Kirinčić, Vedran; Skok, Srđan; Terzija, Vladimir

A Hybrid State Estimator with Pseudo-Flows and Pseudo-Injections // International review on modelling and simulations, 6 (2013), 2; 218-226 (međunarodna recenzija, članak, znanstveni)

www.praiseworthyprize.com

757.

Kirinčić, Vedran; Skok, Srđan; Marušić , Ante

A hybrid constrained state estimator with pseudo injection measurements // Przegląd elektrotechniczny, 2013 (2013), 8; 137-142 (međunarodna recenzija, članak, znanstveni)

pe.org.pl

758.

Gradišnik, Vera; Linić, Antonio

Defects characterization in p-i-n a-Si:H photodiode i-layer // Journal of non-crystalline solids, 363 (2013), 193-198 doi:10.1016/j.jnoncrysol.2012.12.032 (međunarodna recenzija, pregledni rad, znanstveni)

doi www.sciencedirect.com ac.els-cdn.com dx.doi.org

759.

Kravanja, Stojan; Turkalj, Goran; Šilih, Simon; Žula, Tomaž

Optimal design of single-story steel building structures based on parametric MINLP optimization // Journal of constructional steel research, 81 (2013), 86-103 doi:10.1016/j.jcsr.2012.11.008 (međunarodna recenzija, članak, znanstveni)

doi www.journals.elsevier.com ac.els-cdn.com dx.doi.org

760.

Tomić, Draško; Ogrizović, Dario; Car, Zlatan

Cloud Solutions for High Performance Computing: Oxymoron or Realm? // Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 20 (2013), 1; 177-182 (podatak o recenziji nije dostupan, prethodno priopćenje, znanstveni)

761.

Arbula, Damir; Lenac, Kristijan

Pymote: high level Python library for event based simulation and evaluation of distributed algorithms // International journal of distributed sensor networks, 2013 (2013), 797354-1 doi:10.1155/2013/797354 (međunarodna recenzija, članak, znanstveni)

doi downloads.hindawi.com www.hindawi.com dx.doi.org

762.

Brnić, Josip; Turkalj, Goran; Niu, Jitai; Čanađija, Marko; Lanc, Domagoj

Analysis of Experimental Data on the Behavior of Steel S275JR - Reliability of Modern Design // Materials & design, 47 (2013), 497-504 doi:10.1016/j.matdes.2012.12.037 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com ac.els-cdn.com dx.doi.org

763.

Carović-Stanko, Klaudija; Fruk, Goran; Šatović, Zlatko; Ivić, Dario; Politeo, Olivera; Sever, Zdravka; Grdiša, Martina; Strikić, Frane; Jemrić, Tomislav

Effects of Ocimum spp. essential oil on Monilinia laxa in vitro // The Journal of essential oil research, 25 (2013), 2; 143-148 doi:10.1080/10412905.2012.751057 (međunarodna recenzija, članak, znanstveni)

doi www.tandfonline.com

764.

Sučić, Viktor; Lerga, Jonatan; Vrankić, Miroslav

Adaptive Filter Support Selection for Signal Denoising Based on the Improved ICI Rule // Digital signal processing, 23 (2013), 1; 65-74 doi:10.1016/j.dsp.2012.06.014 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com dx.doi.org

765.

Marunić, Gordana; Glažar, Vladimir

Spatial ability through engineering graphics education // INTERNATIONAL JOURNAL OF TECHNOLOGY AND DESIGN EDUCATION, 23 (2013), 3; 703-715 doi:10.1007/s10798-012-9211-y (međunarodna recenzija, članak, znanstveni)

doi link.springer.com link.springer.com

766.

Prelec, Zmagoslav; Dragičević, Viktor; Mrakovčić, Tomislav

Performance Study of Fuel Oil Additives in Real Power Plant Operating Conditions // Fuel processing technology, 110 (2013), 176-183 doi:10.1016/j.fuproc.2012.12.010 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

767.

Tomić, Mladen; Seršić, Damir

Adaptive edge-preserving denoising by point-wise wavelet basis selection // IET signal processing, 6 (2012), 1; 1-7 doi:10.1049/iet-spr.2010.0240 (međunarodna recenzija, članak, znanstveni)

doi

768.

Bartovčak, David; Vrankić, Miroslav

Video Denoising Based on Adaptive Temporal Averaging // Engineering review (Technical Faculty University of Rijeka), 32 (2012), 2; 64-69 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada hrcak.srce.hr

769.

Komen, Vitomir; Blasina, Mateo; Ćućić, Renato

Research on the power grid operation improvement by static VAR compensators // Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 19 (2012), 1; 57-64 (međunarodna recenzija, članak, znanstveni)

770.

Valentine, David; Mezić, Igor; Maćešić, Senka; Črnjarić-Žic, Nelida; Ivić, Stefan; Hogan, Patrick; Fonoberov, Vladimir A.; Loire Sophie

Dynamic autoinoculation and the microbial ecology of a deep water hydrocarbon irruption // Proceedings of the National Academy of Sciences of the United States of America, 109 (2012), 50; 20286-20291 doi:10.1073/pnas.1108820109 (međunarodna recenzija, članak, znanstveni)

doi www.pnas.org

771.

Kstelac, Dražen; Vukomanović Mladen; Ikonić Milan

Integrating Enterprise Project Portfolio Management with the Balanced Scorecard: a Case from the Pharmaceutical Industry // Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 2 (2012), 303-316 (međunarodna recenzija, članak, znanstveni)

772.

Plančak, Miroslav; Vilotić, Dragiša; Ivanišević, Aljoša; Movrin, Dejan; Kršulja, Marko

BACKWARD COLD EXTRUSION OF ALUMINUM AND STEEL BILLETS BY NON - CIRCULAR PUNCH // Transfer inovácií, 22 (2012), 1; 179-182 doi:http://www.sjf.tuke.sk/transferinovacii/pages/archiv/transfer/22-2012/pdf/179-182.pdf (podatak o recenziji nije dostupan, članak, znanstveni)

Pristup cjelovitom tekstu rada doi

773.

Glavan, Ivica; Prelec, Zmagoslav

The analysis of trigeneration energy systems and selection of the best option based on criteria of GHG emission, cost and efficiency // Engineering review : znanstveni časopis za nove tehnologije u strojarstvu, brodogradnji i elektrotehnici, 32 (2012), 3; 131-139 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada hrcak.srce.hr

774.

Kuljanić, Elso; Sortino, Marco; Totis, Giovanni; Prosperi, F

Evaluation of Commercial Tools for Machining Special-Alloy Hadfield Steel // Machines, Technologies, Materials, 1 (2012), 96-99 (podatak o recenziji nije dostupan, članak, znanstveni)

775.

Kolić, Damir; Fafandjel, Nikša; Zamarin, Albert

Lean Manufacturing Methodology for Shipyards // Brodogradnja, 63 (2012), 1; 18-29 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada

776.

Rončević, Branimir; Siminiati, Dubravka

Experimental analysis of an elastic layer pressed into a substrate using digital image correlation // Advanced engineering, 6 (2012), 2; 221-228 (podatak o recenziji nije dostupan, članak, znanstveni)

777.

Blecich, Paolo; Orlić, Ivica

Solar concrete collectors for heating of domestic hot water // Strojarstvo: časopis za teoriju i praksu u strojarstvu, 54 (2012), 6; 423-432 (međunarodna recenzija, članak, znanstveni)

778.

Stanković, Srđan; Orović, Irena; Sučić, Viktor

Averaged multiple L-spectrogram for analysis of noisy nonstationary signals // Signal processing, 92 (2012), 12; 3068-3074 doi:10.1016/j.sigpro.2012.06.001 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

779.

Siminiati, Dubravka

Comparison of the Physical Properties of Tap Water and Mineral Oil // Advanced engineering, 6 (2012), 1; 93-102 (podatak o recenziji nije dostupan, članak, znanstveni)

780.

Marunić, Gordana

Web Deformation Related to Parameters of Gear Structure // Machine Design (Novi Sad), 4 (2012), 3; 161-166 (podatak o recenziji nije dostupan, članak, znanstveni)

781.

Čikić, Ante; Pavković, Branimir; Vrhovski, Zoran

Dynamic Appearances and Effects of Heat Source at Sawn Timber Drying // Strojarstvo, 54 (2012), 1; 71-78 (podatak o recenziji nije dostupan, prethodno priopćenje, znanstveni)

hrcak.srce.hr hrcak.srce.hr

782.

Joler, Miroslav

How FPGAs Can Help Create Self-Recoverable Antenna Arrays // International Journal of Antennas and Propagation, 2012 (2012), Article ID 196925, 10 pages; 196925, 10 doi:10.1155/2012/196925 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada doi www.hindawi.com www.researchgate.net www.hindawi.com

783.

Joler, Miroslav

Self-recoverable antenna arrays // IET microwaves antennas & propagation, 6 (2012), 14; 1608-1615 doi:10.1049/iet-map.2012.0068 (međunarodna recenzija, članak, znanstveni)

doi dx.doi.org digital-library.theiet.org

784.

Jurkovic, Zoran; Perinic, Mladen; Maricic, Sven; Sekulic, Milenko; Mandic, Vesna

Application of Modelling and Optimization Methods in Abrasive Water Jet Machining // Journal of trends in the development of machinery and associated technology, 16 (2012), 1; 59-62 (podatak o recenziji nije dostupan, članak, znanstveni)

Pristup cjelovitom tekstu rada www.tmt.unze.ba

785.

Čarija, Zoran; Kranjčević, Lado; Banić, Vjekoslav; Čavrak, Marko

Numerical analysis of Wells turbine for wave power conversion // Engineering review : znanstveni časopis za nove tehnologije u strojarstvu, brodogradnji i elektrotehnici, 32 (2012), 3; 141-146 (međunarodna recenzija, članak, znanstveni)

786.

Senčić, Tomislav; Račić, Nikola; Franković, Bernard

Influence of Low-Speed Marine Diesel Engine Settings on Waste Heat Availability // Brodogradnja, 63 (2012), 4; 329-335 (podatak o recenziji nije dostupan, članak, znanstveni)

787.

Kirinčić, Vedran; Skok, Srđan; Pavić, Ivica

Power system state estimation based on PMU measurements vs SCADA measurements // International review on modelling and simulations, 5 (2012), 5; 311-318 (međunarodna recenzija, članak, znanstveni)

www.praiseworthyprize.it

788.

Jurković, Milan; Jurković, Zoran; Mandić, Vesna

Experimental Analysis and Mathematical Modelling of Rolling Force // Strojarstvo : časopis za teoriju i praksu u strojarstvu, 54 (2012), 2; 145-151 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada

789.

Plančak, Miroslav; Movrin, Dejan; Vilotić, Dragiša; Car, Zlatan; Ivanišević, Aljoša; Kačmarcik, Igor;

An analysis of non-axisymmetric backward extrusion // Tehnicki Vjesnik-Technical Gazette, 19 (2012), 4; 953-957 doi:http://hrcak.srce.hr/index.php?show=clanak&id_clanak_jezik=137744 (međunarodna recenzija, članak, znanstveni)

doi

790.

Mandić, Vesna; Erić, Dragan; Adamović, Dragan; Janjić, Mileta, Jurković, Zoran; Babić, Živko; Ćosić, Predrag

Concurrent Engineering Based on Virtual Manufacturing // Tehnicki Vjesnik-Technical Gazette, 19 (2012), 4; 885-892 (međunarodna recenzija, članak, znanstveni)

791.

Cecić, Mojmil; Krajči, Vesna; Bonković, Mirjana

Optimization of Model-Reference Variable-Structure Controller Parameters for Direct-Current Motor // Journal of computations and modelling, 2 (2012), 3; 67-88 (recenziran, članak, znanstveni)

www.scienpress.com

792.

Kršćanski, Sanjin; Turkalj, Goran

FEM stress concentration factors for fillet welded CHS-plate T-joint // Engineering review : znanstveni časopis za nove tehnologije u strojarstvu, brodogradnji i elektrotehnici, 32 (2012), 3; 147-155 (međunarodna recenzija, članak, znanstveni)

er.riteh.hr

793.

Radulović, Duško; Skok, Srđan; Kirinčić, Vedran

Cogeneration – Investment dilemma // Energy (Oxford), 48 (2012), 1; 177-187 doi:10.1016/j.energy.2012.06.057 (međunarodna recenzija, članak, znanstveni)

doi dx.doi.org www.sciencedirect.com

794.

Deša, Kristian; Perić, Mladen; Husedžinović, Ino; Šustić, Alan; Korušić, Anđelko; Karadža, Vjekoslav; Matleković, Dražen; Prstec-Veronek, Branka; Žuvić- Butorac, Marta; Sokolić, Jadranko et al.

Prognostic performance of the Simplified Acute Physiology Score II in major Croatian hospitals: a prospective multicenter study // Croatian medical journal, 53 (2012), 5; 442-449 doi:10.3325/cmj.2012.53.442 (međunarodna recenzija, članak, znanstveni)

doi www.cmj.hr

795.

Kipke, Irena; Fruk, Goran; Jemrić, Tomislav

Djelovanje 1-metil ciklopropena na fiziološke procese i kakvoću voća poslije berbe // Glasnik zaštite bilja, 35 (2012), 5; 46-55 (podatak o recenziji nije dostupan, pregledni rad, znanstveni)

796.

Karaivanov, Dimitar; Troha, Sanjin

A method for storing large lenght loads // Journal of the University of Chemical Technology and Metallurgy, 47 (2012), 3; 347-350 (međunarodna recenzija, članak, znanstveni)

797.

Troha, Sanjin; Lovrin, Neven; Milovančević, Miloš

Selection of the Two–Carrier Shifting Planetary Gear Train Controlled by Clutches and Brakes // Transactions of FAMENA, 3 (2012), 36; 1-12 (međunarodna recenzija, članak, znanstveni)

798.

Brnić, Josip; Vukelić, Goran; Turkalj, Goran

Crack driving force prediction based on finite element analysis using standard models // Structural engineering and mechanics, 44 (2012), 5; 601-609 (međunarodna recenzija, članak, znanstveni)

technopress.kaist.ac.kr

799.

Pavković, Branimir; Delač, Boris; Mrakovčić, Tomislav

Modified Water Loop Heat Pump System for a Hospital with Complex HVAC Systems // Tehnicki Vjesnik-Technical Gazette, 19 (2012), 3; 621-631 (podatak o recenziji nije dostupan, prethodno priopćenje, znanstveni)

800.

Andrijašević, Andrea; Ivančević, Bojan; Horvat, Marko

Evaluation of speech intelligibility in two acoustically different spaces using logatome test and measured impulse responses // Engineering review : znanstveni časopis za nove tehnologije u strojarstvu, brodogradnji i elektrotehnici, 32 (2012), 2; 78-85 (međunarodna recenzija, članak, znanstveni)

er.riteh.hr

801.

Galinac Grbac, Tihana; Runeson, Per; Huljenić Darko

A Second Replicated Quantitative Analysis of Fault Distributions in Complex Software Systems // IEEE transactions on software engineering, 39 (2012), 4; 462-476 doi:10.1109/TSE.2012.46 (međunarodna recenzija, članak, znanstveni)

doi ieeexplore.ieee.org

802.

Galinac Grbac, Tihana; Car, Željka; Huljenić, Darko

Quantifying value of adding inspection effort early in the development process: A case study // Iet software, 6 (2012), 3; 249-259 doi:10.1049/iet-sen.2011.0104 (međunarodna recenzija, članak, znanstveni)

doi ieeexplore.ieee.org

803.

Puh, Franko; Šegota, Toni; Jurković, Zoran

Optimization of hard turning process parameters with PCBN tool based on the Taguchi method // Tehnicki Vjesnik-Technical Gazette, 19 (2012), 2; 415-419 (međunarodna recenzija, članak, znanstveni)

804.

Kostelac, Dražen; Vukomanović, Mladen; Ikonić, Milan

Integrating enterprise project portfolio management with the balanced scorecard: a case from the pharmaceutical industry // Tehnicki Vjesnik-Technical Gazette, 19 (2012), 2; 303-314 (međunarodna recenzija, članak, znanstveni)

805.

Dražić, Ivan; Mujaković, Nermina

3-D flow of a compressible viscous micropolar fluid with spherical symmetry: a local existence theorem // Boundary value problems, (2012), 69-1 doi:10.1186/1687-2770-2012-69 (međunarodna recenzija, članak, znanstveni)

doi www.boundaryvalueproblems.com link.springer.com

806.

Kršulja, Marko; Mijić, Saša; Barišić, Branimir; Car, Zlatan

Design and Planning of Clamping Work-holder Station for Sheet Metal Part of Car Body // Manufacturing and industrial engineering, 11 (2012), 2; 38-43 (podatak o recenziji nije dostupan, članak, znanstveni)

opac.lib.tuke.sk web.tuke.sk web.tuke.sk

807.

Plančak, Miroslav; Kacmarcik, Igor; Vilotić, Dragiša; Kršulja, Marko

Compression of Bimetallic Components – Analytical and Experimental Investigation // Annals of the Faculty of Engineering Hunedoara, X (2012), 2; 157-160 (podatak o recenziji nije dostupan, članak, znanstveni)

annals.fih.upt.ro annals.fih.upt.ro

808.

Karaivanov, Dimitar; Troha, Sanjin; Pavlova, Ralitsa

Investigation into self-locking planetary gear trains throught the lever analogy // Transactions of FAMENA, 36 (2012), 1; 13-24 (međunarodna recenzija, članak, znanstveni)

809.

Korač, Dragan; Saulig, Nicoletta; Sučić, Viktor; Seršić, Damir

Detecting the Number of Components in a Nonstationary Signal Using the Renyi Eentropy of Its Time-Frequency Distributions // Engineering review : znanstveni časopis za nove tehnologije u strojarstvu, brodogradnji i elektrotehnici, 32 (2012), 23-31 (međunarodna recenzija, članak, znanstveni)

810.

Garma, Tonko; Milanović, Željka; Marasović, Ivan

Insulation verification using low voltage and high current sensitivity // Engineering review : znanstveni časopis za nove tehnologije u strojarstvu, brodogradnji i elektrotehnici, 32 (2012), 2; 86-95 (međunarodna recenzija, članak, znanstveni)

811.

Rukavina, Sanja; Zuvic-Butorac, Marta; Ledic, Jasminka; Milotic, Branka; Jurdana-Sepic, Rajka

Developing positive attitude towards science and mathematics through motivational classroom experiences // Science education international, 23 (2012), 1; 6-19 (međunarodna recenzija, članak, znanstveni)

www.icaseonline.net

812.

Sumina, Damir; Bulić, Neven; Vražić, Mario

Load Angle Control of a Synchronous Generator // Przeglad Elektrotechniczny, 88 (2012), 3a/2012; 225-231 (međunarodna recenzija, članak, znanstveni)

pe.org.pl pe.org.pl

813.

Staniša, Branko; Schauperl, Zdravko; Šnajdar, Mateja

Erosion process of 66 MW steam turbine rotor blades // Materials Testing, 54 (2012), 157-162 (međunarodna recenzija, članak, znanstveni)

www.materialstesting.de

814.

Lerga, Jonatan; Sučić, Viktor; Grbac, Edi

An adaptive method for video denoising based on the ICI rule // Engineering review: znanstveni časopis za nove tehnologije u strojarstvu, brodogradnji i elektrotehnici, 32 (2012), 1; 33-40 (međunarodna recenzija, članak, znanstveni)

er.riteh.hr

815.

Manestar, Dubravko; Robert, Tićac; Maričić, Sven; Malvić, Goran; Čorak, Davor; Marjanović Kavanagh, Marcel; Prgomet, Drago; Starčević, Radan

Amount of Airflow Required for Olfactory Perception in Laryngectomees: A Prospective Interventional Study // Clinical otolaryngology, 37 (2012), 1; 28-34 doi:10.1111/j.1749-4486.2012.02442.x (međunarodna recenzija, članak, znanstveni)

doi onlinelibrary.wiley.com

816.

Niu, Jitai; Luo, Xiangwei; Tian, Hao; Brnić, Josip

Vacuum brazing of aluminium metal matrix composite (55 vol.% SiCp/A356) using aluminium-based filler alloy // Materials Science and Engineering B-Advanced Functional Solid-State Materials, 177 (2012), 19; 1707-1711 doi:10.1016/j.mseb.2011.12.042 (međunarodna recenzija, članak, znanstveni)

doi ac.els-cdn.com www.sciencedirect.com dx.doi.org

817.

Prpić-Oršić, Jasna; Faltinsen, Odd Magnus

Estimation of ship speed loss and associated CO2 emissions in a seaway // Ocean engineering, 44 (2012), 1; 1-10 doi:10.1016/j.oceaneng.2012.01.028 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com www.sciencedirect.com

818.

Štajduhar, Ivan; Dalbelo-Bašić, Bojana

Uncensoring censored data for machine learning: A likelihood-based approach // Expert systems with applications, 39 (2012), 8; 7226-7234 doi:10.1016/j.eswa.2012.01.054 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com ac.els-cdn.com dx.doi.org

819.

Marunić, Gordana; Gregov, Goran; Glažar, Vladimir

Comparison between 3D FEM and Standard ISO Tooth Root Stresses // Key engineering materials, 488-489 (2012), 85-88 doi:10.4028/www.scientific.net/KEM.488-489.85 (podatak o recenziji nije dostupan, članak, znanstveni)

doi www.scientific.net

820.

Brnić, Josip; Turkalj, Goran; Vukelić, Goran; Brčić, Marino

Analysis of the Dependence of Material Properties on Temperature – Steel 1.4122 // High temperature materials and processes, 31 (2012), 3; 259-266 doi:10.1515/htmp-2012-0003 (međunarodna recenzija, članak, znanstveni)

doi www.degruyter.com

821.

Crnković, Bojan; Črnjarić-Žic, Nelida

Binary weighted essentially non-oscillatory (BWENO) approximation // Journal of computational and applied mathematics, 236 (2012), 9; 2431-2451 doi:10.1016/j.cam.2011.12.002 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com ac.els-cdn.com dx.doi.org

822.

Stanković, Igor; Perinić, Mladen; Jurković, Zoran; Mandić, Vesna; Maričić, Sven

USAGE OF NEURAL NETWORK FOR THE PREDICTION OF SURFACE ROUGHNESS AFTER THE ROLLER BURNISHING // METALURGIJA, 51 (2012), 2; 207-210 (podatak o recenziji nije dostupan, prethodno priopćenje, znanstveni)

823.

Plančak, Miroslav; Car, Zlatan; Kršulja, Marko; Vilotić, Dragiša; Kačmarcik, Igor; Movrin, Dejan

Possibilities to Measure Contact Friction in Bulk Metal Forming // Tehnicki Vjesnik-Technical Gazette, 19 (2012), 4; 727-734 doi:http://hrcak.srce.hr/index.php?show=clanak&id_clanak_jezik=137660 (međunarodna recenzija, članak, znanstveni)

doi

824.

Pepelnjak, Tomaž; Magoč, Vladimir; Barišić, Branimir

Analysis of Shear Hat Test in Digital Environment // METALURGIJA, 51 (2012), 2; 153-156 (međunarodna recenzija, članak, znanstveni)

public.carnet.hr public.carnet.hr

825.

Kršulja, Marko; Car, Zlatan; Radelja, Hrvoje

Behaviour of X5 CrNiMo 17-12-2 Material During Deep Drawing Process // METALURGIJA, 51 (2012), 2; 203-206 (međunarodna recenzija, članak, znanstveni)

public.carnet.hr public.carnet.hr

826.

Brnić, Josip; Turkalj, Goran; Čanađija, Marko; Lanc, Domagoj; Kršćanski, Sanjin

Responses of Austenitic Stainless Steel American Iron and Steel Institute (AISI) 303 (1.4305) Subjected to Different Environmental Conditions // Journal of testing and evaluation, 40 (2012), 2; 319-328 doi:10.1520/JTE104160 (međunarodna recenzija, članak, znanstveni)

doi www.astm.org

827.

Vukelić, Goran; Brnić, Josip

Pressure Vessel Steels Crack Driving Force Assessment Using Different Models // Journal of constructional steel research, 72 (2012), 29-34 doi:10.1016/j.jcsr.2011.09.015 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com ac.els-cdn.com dx.doi.org

828.

Legović, Asja; Mady Maričić, Barbara; Škrinjarić, Ana; Žuvić Butorac, Marta; Meštrović, Senka; Lapter Varga, Marina

Importance of Interincisal index for predicting mesiodistal crown diameters of canines and premolars // Collegium antropologicum, 36 (2012), 4; 1287-1291 (međunarodna recenzija, članak, znanstveni)

829.

Stubljar, Sanja; Jemrić, Tomislav; Fruk, Goran; Ivić, Dario; Žutić, Ivanka; Fabek, Sanja; Benko, Božidar; Toth, Nina

Postharvest fruit quality and occurrence intensity of pathogenic fungi on nectarine // Savremena poljoprivreda, 61 (2012), special; 37-44 (podatak o recenziji nije dostupan, članak, znanstveni)

830.

Ninić, Neven; Grljušić, Mirko; Jelić, Maro

Decomposition Method as a New Type of Second Law Analysis of the Combustion Process at Internal Combustion Engines // International Journal of Exergy, 10 (2012), 1; 1-21 doi:10.1504/IJEX.2012.045058 (međunarodna recenzija, članak, znanstveni)

doi www.inderscience.com

831.

Glažar, Vladimir; Trp, Anica; Lenić, Kristian

Numerical Study of Heat Transfer and Analysis of Optimal Fin Pitch in a Wavy Fin-and-Tube Heat Exchanger // HEAT TRANSFER ENGINEERING, 33 (2012), 2; 88-96 doi:10.1080/01457632.2011.589312 (međunarodna recenzija, članak, znanstveni)

doi www.tandfonline.com

832.

Jemrić, Tomislav; Zoran, Ilić

Present state of cold chain and postharvest loss of fruits and vegetables in Croatia and Serbia // Agriculturae Conspectus Scientificus, 77 (2012), 1; 1-4 (međunarodna recenzija, pregledni rad, znanstveni)

Pristup cjelovitom tekstu rada acs.agr.hr www.agr.unizg.hr

833.

Gradišnik, Vera

Characterization of a-Si:H P-I-N Photodiode Response // INFORMACIJE MIDEM-JOURNAL OF MICROELECTRONICS ELECTRONIC COMPONENTS AND MATERIALS, 42 (2012), 1; 23-28 (međunarodna recenzija, članak, znanstveni)

www.midem-drustvo.si

834.

Tomić, Mladen; Lončarić, Sven; Seršić, Damir

Adaptive Spatio-Temporal Denoising of Fluoroscopic X-ray Sequences // Biomedical Signal Processing and Control, 7 (2012), 2; 173-179 doi:10.1016/j.bspc.2011.02.003 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com dx.doi.org

835.

Fruk, Goran; Jemrić, Tomislav

Acoustic Impulse Method Can not Determine Nectarine Fruit Quality // Acta Horticulturae, 934 (2012), 133-138 (međunarodna recenzija, članak, znanstveni)

836.

Turkalj, Goran; Brnić, Josip; Lanc, Domagoj; Kravanja, Stojan

Updated Lagrangian formulation for nonlinear stability analysis of thin-walled frames with semi-rigid connections // International Journal of Structural Stability and Dynamics, 12 (2012), 3; 1250013-1 doi:10.1142/S0219455412500137 (međunarodna recenzija, članak, znanstveni)

doi www.worldscientific.com

837.

Prpić-Oršić, Jasna; Turk, Anton; Dejhalla, Roko

Genetic-Algorithm-Based Method for Ship Extreme Behavior Assessment // Naval engineers journal, 124 (2012), 3; 75-84 (međunarodna recenzija, članak, znanstveni)

www.navalengineers.org

838.

Franković, Dubravko; Pavković, Branimir; Bupić, Matko

Consequences of energy efficiency measures implementation to buildings' electrical systems // Tehnički vjesnik, 18 (2011), 1; 1-13 (međunarodna recenzija, članak, znanstveni)

hrcak.srce.hr

839.

Sumina, Damir; Bulić, Neven; Skok, Srđan

Stabilization of the electromechanical oscillations of synchronous generator // Strojarstvo, 53 (2011), 3; 209-219 (podatak o recenziji nije dostupan, prethodno priopćenje, znanstveni)

840.

Terzija, Vladimir; Valverde, G.; Cai, D.; Regulski, P.; Madani, V.; Fitch, J.; Skok, Srđan; Begović, Miroslav M.; Phadke, A.

Wide Area Monitoring, Protection and Control of Future Electric Power Networks // Proceedings of the IEEE, 99 (2011), 1; 80-93 doi:10.1109/JPROC.2010.2060450 (međunarodna recenzija, članak, znanstveni)

doi ieeexplore.ieee.org

841.

Franković, Dubravko; Živić-Đurović, Marijana; Sladić, Saša

Some aspects of implementing grid-connected PV systems // Engineering review : znanstveni časopis za nove tehnologije u strojarstvu, brodogradnji i elektrotehnici, 31 (2011), 2; 71-79 (međunarodna recenzija, članak, znanstveni)

er.riteh.hr

842.

Smoljan, Božo; Iljkić, Dario; Traven, Furio

Fracture of Jaw Arm Made of Cast Steel GS-42CrMo4 // Strojarstvo : časopis za teoriju i praksu u strojarstvu, 53 (2011), 4; 307-310 (podatak o recenziji nije dostupan, prethodno priopćenje, znanstveni)

843.

Marunić, Gordana

Tooth Root Stress Modifying Factors of Webbed Gears // Machines, Technologies, Materials, 10 (2011), 38-41 (podatak o recenziji nije dostupan, članak, znanstveni)

844.

Smoljan, Božo; Iljkić, Dario; Novak, Hrvoje

Prediction of quenched and tempered steel and cast steel properties // Journal of achievements in materials and manufacturing engineering, 49 (2011), 2; 369-374 (podatak o recenziji nije dostupan, članak, znanstveni)

845.

Štimac, Goranka; Braut, Sanjin; Žigulić, Roberto

Structural Optimization of Turbine Generator Foundation with Frequency Constraint // Strojarstvo, 53 (2011), 5; 389-398 (međunarodna recenzija, članak, znanstveni)

846.

Rubeša, Rajko; Fafandjel, Nikša; Kolić, Damir

Procedure for estimating the effectiveness of ship modular outfitting // Engineering review : znanstveni časopis za nove tehnologije u strojarstvu, brodogradnji i elektrotehnici, 31 (2011), 1; 55-62 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada

847.

Kolić, Damir; Fafandjel, Nikša; Rubeša, Rajko

Applying lean quality with risk analysis to aid shipyard block assembly decision making // Strojarstvo, 53 (2011), 2; 73-82 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada

848.

Belašić, Vibor; Kalinić, Aleksandra; Šimunić, Juraj

Impact of New Technological Solutions on Power System Process Information // International journal of electrical and computer engineering systems, 2 (2011), 67-74 (podatak o recenziji nije dostupan, pregledni rad, znanstveni)

www.etfos.hr

849.

Fafandjel, Nikša; Dobrinić, Julijan; Hadjina, Marko; Matulja, Tin; Čavrak, Marko

An Approach to Ship Water Ballast Management by Continuous Flow-through Method // Strojarstvo, 53 (2011), 2; 95-102 (međunarodna recenzija, članak, znanstveni)

850.

Vukelić, Goran; Brnić, Josip; Brčić, Marino

Numerical Assessment of Crack Driving force for Two Types of Steel // Transactions of FAMENA, 35 (2011), 4; 15-20 (međunarodna recenzija, članak, znanstveni)

851.

Bonato, Jasminka

Umrežavanje prirodnog kaučuka // Pomorstvo : scientific journal of maritime research, 25 (2011), 2; 225-502 (podatak o recenziji nije dostupan, članak, znanstveni)

hrcak.srce.hr

852.

Skok, Srđan; Matica, Renata; Šturlić, Ivan

Enhanced open architecture of phasor data concentrator // European transactions on electrical power, 21 (2011), 4; 1531-1540 doi:10.1002/etep.527 (međunarodna recenzija, članak, znanstveni)

doi onlinelibrary.wiley.com

853.

Sladić, Saša; Skok, Srđan; Nedeljković, David

Efficiency Considerations and Application Limits of Single-Phase Active Power Filter with Converters for Photoenergy Applications // International journal of photoenergy, (2011), 643912-1 doi:10.1155/2011/643912 (međunarodna recenzija, članak, znanstveni)

doi www.hindawi.com www.hindawi.com www.hindawi.com

854.

Ćirković, Nemanja; Hadžistević, Miodrag; Jurković, Zoran

Analiza uticaja režima obrade na aritmetičku hrapavost obrađene površine pri čeonom glodanju // Zbornik radova Fakulteta tehničkih nauka (Novi Sad), 26 (2011), 6; 1311-1314 (podatak o recenziji nije dostupan, članak, znanstveni)

www.ftn.uns.ac.rs

855.

Lenac, Kristijan; Mumolo, Enzo; Nolich, Massimiliano

Robust and Accurate Genetic Scan Matching Algorithm for Robotic Navigation // Lecture Notes in Computer Science, 7101 (2011), 584-593 doi:10.1007/978-3-642-25486-4_58 (međunarodna recenzija, članak, znanstveni)

doi

856.

Skok, Srđan; Brnobić, Dalibor; Kirinčić, Vedran

Croatian Academic Research Wide Area Monitoring System - CARWAMS // International Journal on Communications Antenna and Propagation, 1 (2011), 4; 72-78 (međunarodna recenzija, članak, znanstveni)

www.praiseworthyprize.it

857.

Vrcan, Željko; Siminiati, Dubravka; Lovrin, Neven

Design Proposal of a Hydrostatic City Bus Transmission // Engineering review : znanstveni časopis za nove tehnologije u strojarstvu, brodogradnji i elektrotehnici, 31 (2011), 2; 81-89 (međunarodna recenzija, članak, znanstveni)

858.

Kukec, Mihael; Ljubic, Sandi; Glavinic, Vlado

Need for Usability and Wish for Mobility: Case Study of Client End Applications for Primary Healthcare Providers in Croatia // Lecture Notes in Computer Science, 7058 (2011), 171-190 doi:10.1007/978-3-642-25364-5_15 (međunarodna recenzija, članak, znanstveni)

doi www.springerlink.com

859.

Vukelić, Goran; Brnić, Josip

J-Integral As Possible Criterion In Material Fracture Toughness Assessment // Engineering review : znanstveni časopis za nove tehnologije u strojarstvu, brodogradnji i elektrotehnici, 31 (2011), 2; 91-96 (međunarodna recenzija, članak, znanstveni)

er.riteh.hr

860.

Radica, Gojmir; Račić, Nikola; Kasum, Josip;

Development of marine engines to fulfilling IMO emission regulations for yachts // WIT transactions on ecology and the environment, 148 (2011), 611-621 doi:10.2495/RAV110561 (podatak o recenziji nije dostupan, članak, znanstveni)

doi www.witpress.com www.witpress.com

861.

Dekanić, Andrea; Dobrila Dintinjana, Renata; Budisavljević, Ivana; Pećanić, Sanja; Žuvić Butorac, Marta; Jonjić, Nives

Strong nuclear EGFR expression in colorectal carcinomas is associated with cyclin-D1 but not with gene EGFR amplification // Diagnostic pathology, 6 (2011), 11; 108-1 doi:10.1186/1746-1596-6-108 (međunarodna recenzija, članak, znanstveni)

doi www.ncbi.nlm.nih.gov www.diagnosticpathology.org

862.

Plančak, Miroslav; Car, Zlatan; Vilotić, Dragiša; Movrin, Dejan; Kršulja, Marko

Upsetting of Bimetallic Components in Closed Die // Engineering review : znanstveni časopis za nove tehnologije u strojarstvu, brodogradnji i elektrotehnici, 31 (2011), 2; 105-109 (međunarodna recenzija, članak, znanstveni)

863.

Stanković, Igor; Car, Zlatan, Barišić, Branimir

Comparative simulations of the heavy machining production system // Engineering review : znanstveni časopis za nove tehnologije u strojarstvu, brodogradnji i elektrotehnici, 31 (2011), 1; 1-11 (međunarodna recenzija, članak, znanstveni)

864.

Sučić, Viktor; Saulig, Nicoletta; Boashash, Boualem

Estimating the Number of Components of a Multicomponent Nonstationary Signal Using the Short-Term Time-Frequency Renyi Entropy // EURASIP Journal on Advances in Signal Processing, 125 (2011), 125-1 doi:10.1186/1687-6180-2011-125 (međunarodna recenzija, članak, znanstveni)

doi asp.eurasipjournals.com

865.

Marković, Kristina; Franulović, Marina

Contact stresses in gear teeth due to tip relief profile modification // Engineering review : znanstveni časopis za nove tehnologije u strojarstvu, brodogradnji i elektrotehnici, 31 (2011), 1; 19-26 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada

866.

Smoljan, Božo; Iljkić, Dario; Novak, Hrvoje

Computer simulation of quenched and tempered steel properties // Journal of achievements in materials and manufacturing engineering, 46 (2011), 2; 175-181 (podatak o recenziji nije dostupan, članak, znanstveni)

www.journalamme.org

867.

Štimac, Goranka; Braut Sanjin; Žigulić, Roberto

Vibration suppression of a flexible rotor using active magnetic bearings (AMB) // Transactions of FAMENA, 35 (2011), 3; 27-38 (međunarodna recenzija, članak, znanstveni)

868.

Galinac Grbac, Tihana; Huljenić, Darko

Defect Detection Effectiveness and Product Quality in Global Software Development // Lecture Notes in Computer Science, 6759 (2011), 113-127 doi:10.1007/978-3-642-21843-9_11 (međunarodna recenzija, članak, znanstveni)

doi www.springerlink.com www.springerlink.com

869.

Bonefačić, Igor; Blecich, Paolo; Wolf, Igor

Thermodynamic analysis of heat and mass transfer in the combustion chamber of an industrial furnace // Strojarstvo, 53 (2011), 3; 179-189 (međunarodna recenzija, članak, znanstveni)

870.

Rončević, Branimir; Staniša, Branko

Finite element analysis of highly loaded components of a 50 MW steam turbine // Advanced engineering, 5 (2011), 1; 69-82 (podatak o recenziji nije dostupan, članak, znanstveni)

871.

Sopta, Luka; Družeta, Siniša; Holjević, Danko

Analiza posljedica propagacije vodnog vala uslijed proloma velike brane // Građevinar, 63 (2011), 8; 741-749 (međunarodna recenzija, članak, znanstveni)

872.

Maričić, Sven; Kovačević Pavičić, Daniela; Perinić, Mladen; Lajnert, Vlatka

Uporaba tehnološke dokumentacije kod izrade fiksacijskih pločica za vestibuloplastiku // Medicina Fluminensis: glasilo Hrvatskoga liječničkoga zbora, Podružnica Rijeka, 47 (2011), 3; 294-298 (međunarodna recenzija, članak, znanstveni)

873.

Maričić, Sven; Perinić, Mladen; Kovačević Pavičić, Daniela

Contribution to Faster Artifact Classification by Creating an Expert Database // Engineering review : znanstveni časopis za nove tehnologije u strojarstvu, brodogradnji i elektrotehnici, 31 (2011), 1; 13-18 (međunarodna recenzija, članak, znanstveni)

874.

Plančak, Miroslav; Barišić, Branimir; Vilotić, Dragiša; Kacmarcik, Igor; Movrin, Dejan; Skakun, Plavka; Milutinović, Maladimir

Analytical and Numerical Solutions for Friction Calibration Curves (FCC) in Bulk Metal Forming // CA systems in production process planning, 12 (2011), 1; 107-110 (podatak o recenziji nije dostupan, članak, znanstveni)

875.

Lazanja, Matej; Barišić, Branimir; Car, Zlatan; Plančak, Miroslav

Accuracy Inspection of a Milling Machine with Ballbar System // CA systems in production process planning, 12 (2011), 1; 79-82 (podatak o recenziji nije dostupan, članak, znanstveni)

876.

Jokić, Marko; Stegić, Milenko; Butković, Mirko

Reduced-order multiple tuned mass damper optimization: A bounded real lemma for descriptor systems approach // Journal of sound and vibration, 330 (2011), 22; 5259-5268 doi:10.1016/j.jsv.2011.06.005 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com ac.els-cdn.com dx.doi.org

877.

Stojković, Nino; Kamenar, Ervin; Šverko, Mladen

Optimized Second- and Fourth- Order LP and BP Filters // Automatika, 52 (2011), 2; 158-168 (međunarodna recenzija, članak, znanstveni)

878.

Vuković, Aleksandar; Perinić, Mladen; Ikonić, Milan

Conceptual framework for creating customized modular CAPP system // Engineering review : znanstveni časopis za nove tehnologije u strojarstvu, brodogradnji i elektrotehnici, 31 (2011), 1; 35-43 (podatak o recenziji nije dostupan, prethodno priopćenje, znanstveni)

879.

Janjić, Mileta; Vukčević, M.; Mandić, Vesna; Pavletić, Duško; Šibalić, Nikola

Microstructural evolution during friction stir welding of AlSi1MgMn alloy // Metalurgija, 51 (2011), 1; 29-33 (međunarodna recenzija, članak, znanstveni)

880.

Tokić, Iva; Fruk, Goran; Jemrić, Tomislav

Biorazgradiva ambalaža za čuvanje voća i drugih hortikulturnih proizvoda: materijali, svojstva i učinak na kakvoću // Journal of central European agriculture, 12 (2011), 1; 226-238 doi:10.5513/JCEA01/12.1.903 (međunarodna recenzija, pregledni rad, znanstveni)

doi jcea.agr.hr

881.

Brnić, Josip; Turkalj, Goran; Čanađija, Marko; Lanc, Domagoj

AISI 316Ti (1.4571) Steel – Mechanical, Creep and Fracture Properties Versus Temperature // Journal of constructional steel research, 67 (2011), 12; 1948-1952 doi:10.1016/j.jcsr.2011.06.011 (međunarodna recenzija, članak, znanstveni)

doi ac.els-cdn.com www.sciencedirect.com dx.doi.org

882.

Franulović, Marina; Basan, Robert; Kunc, Robert; Prebil, Ivan

Numerical modeling of life prediction of gears // Procedia engineering, 10 (2011), 562-567 (podatak o recenziji nije dostupan, članak, znanstveni)

www.sciencedirect.com

Pregled po ustanovi: Tehnički fakultet, Rijeka (MB: 69)

Radovi u časopisima

Znanstveni i pregledni radovi