Pregled po ustanovi: Tehnički fakultet, Rijeka (MB: 69)
Pronađeno 6583 radova
Prikaz po CROSBI kategorijama
-
187.Volarić, Ivan; Sučić, Viktor; Bokelmann, GotzSparse Time-Frequency Distribution Calculation with an Adaptive Thresholding Algorithm // 11th International Symposium on Image and Signal Processing and Analysis (ISPA 2019)
Dubrovnik, Hrvatska, 2019. str. 1-6 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
188.Volarić, Ivan; Sučić ViktorAdaptive thresholding Scheme for the L1-norm Based Time-Frequency Domain Reconstruction // Proceedings of International Conference on Innovative Technologies IN-TECH 2019
Beograd, Srbija, 2019. str. 1-4 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
189.Sučić, Viktor; Volarić, Ivan; Bokelmann, Goetz; Le Bras, RonanA Novel Approach for Signal Sparse Time-Frequency Representations // CTBT Science and Technology 2019 Conference
Beč, Austrija, 2019. T3.5-P5, 1 (poster, recenziran, cjeloviti rad (in extenso), znanstveni) -
190.Glazar, Vladimir; Mrzljak, Vedran; Gubic, TeoThermodynamic analysis of combined cycle power plant // Proceedings of the 14th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2019) / Meyer, Joshua (ur.).
Wicklow, Irska: HEFAT, 2019. str. 1473-1478 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
191.Glazar, Vladimir; Trp, Anica; Lenić, KristianMicrochannel heat exchanger air side heat transfer analysis and optimization // Proceedings of the 14th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT2019) / Meyer, Joshua (ur.).
Wicklow, Irska: HEFAT, 2019. str. 978-983 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
192.Anđelić, Nikola; Čanađija, Marko; Car, ZlatanNEMS rezonator za detekciju kemijskog oružja za masovno uništenje temeljen na dvoslojnom grafenu // Hrvatsko Društvo za Mehaniku / Skozrit, Ivica ; Tonković, Zdenko ; Karšaj, Igor ; Lesičar, Tomislav (ur.).
Zagreb, 2019. str. 1-6 (predavanje, domaća recenzija, cjeloviti rad (in extenso), znanstveni) -
193.Gradišnik, Mitja; Beranič, Tina; Karakatič, Sašo; Mauša, GoranAdapting God Class thresholds for software defect prediction: A case study // Proceeding of MIPRO 2019
Opatija, 2019. str. 1537-1542 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
194.Franković, Dubravko; Bulić, Neven; Jakoplić, Alen; Rosanda, BorisReefer container power supply and supervision system onboard railway wagons // International Scientific Journal Innovations / Damianov, Dimitar (ur.).
Varna, 2019. str. 66-69 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
195.Lerga Jonatan; Saulig, Nicoletta; Žuškin, Martina; Panjkota, AnteDenoising Accuracy of Adaptive ICI-Based Estimators With Regards to Sampling Rate // 4th International Conference on Smart and Sustainable Technologies (SpliTech) / Perković, Toni ; Vukojević, Katarina ; Rodrigues, Joel J. P. C. ; Nižetić, Sandro ; Patrono, Luigi ; Šolić, Petar (ur.).
Split: Fakultet elektrotehnike, strojarstva i brodogradnje Sveučilišta u Splitu, 2019. str. 1-6 doi:10.23919/SpliTech.2019.8783082 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
196.Mrzljak, Vedran; Orović, Josip; Poljak, Igor; Čulin, JelenaThe ambient temperature influence on deaerator exergy efficiency and exergy losses // IV INTERNATIONAL SCIENTIFIC CONFERENCE INDUSTRY 4.0 - Summer Session - 2019 - PROCEEDINGS / Popov, Georgi ; Ovtcharova, Jivka (ur.).
Sofija: Scientific technical union of mechanical engineering “Industry-4.0”, 2019. str. 69-72 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
197.Mrzljak, Vedran; Orović, Josip; Poljak, Igor; Čulin, JelenaExergy analysis of two water pumps from steam power plant at four different loads // IV INTERNATIONAL SCIENTIFIC CONFERENCE INDUSTRY 4.0 - Summer Session - 2019 - PROCEEDINGS / Popov, Georgi ; Ovtcharova, Jivka (ur.).
Sofija: Scientific technical union of mechanical engineering “Industry-4.0”, 2019. str. 65-68 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
198.Mrzljak, Vedran; Orović, Josip; Poljak, Igor; Lorencin, IvanExergy analysis of steam turbine governing valve from a super critical thermal power plant // XXVII INTERNATIONAL SCIENTIFIC CONFERENCE trans & MOTAUTO ’19 - PROCEEDINGS / Kolev, Petar (ur.).
Sofija: Scientific technical union of mechanical engineering “Industry-4.0”, 2019. str. 99-102 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
199.Mrzljak, Vedran; Žarković, Božica; Prpić-Oršić, Jasna; Anđelić, NikolaNumerical analysis of in-cylinder pressure and temperature change for naturally aspirated and upgraded gasoline engine // XXVII INTERNATIONAL SCIENTIFIC CONFERENCE trans & MOTAUTO ’19 - PROCEEDINGS / Kolev, Petar (ur.).
Sofija: Scientific technical union of mechanical engineering “Industry-4.0”, 2019. str. 95-98 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
200.Kamenar, Ervin; Perčić, Marko; Zelenika, SašaFrom nanometric to meso-scale characterisation of friction using nanoindentation // Proceedings of the 19th EUSPEN International Conference / Leach, R. K. ; Billington, D. ; Nisbet, C. ; Phillips, D. (ur.).
Cranfield: EUSPEN, 2019. str. 72-73 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
201.Mrzljak, Vedran; Orović, Josip; Poljak, Igor; Kocijel, LinoExergy analysis of wet cooling tower at various loads and ambient temperatures // VII INTERNATIONAL SCIENTIFIC CONFERENCE - ENGINEERING. TECHOLOGIES. EDUCATION. SECURITY. 2019 - PROCEEDINGS - VOLUME 1 / Tokarev, Alexander (ur.).
Sofija: Scientific technical union of mechanical engineering “Industry-4.0”, 2019. str. 16-19 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
202.Mrzljak, Vedran; Orović, Josip; Poljak, Igor; Knežević, VlatkoExergy analysis of low-pressure condensate heating system from cogeneration power plant // VII INTERNATIONAL SCIENTIFIC CONFERENCE - ENGINEERING. TECHOLOGIES. EDUCATION. SECURITY. 2019 - PROCEEDINGS - VOLUME 1 / Tokarev, Alexander (ur.).
Sofija: Scientific technical union of mechanical engineering “Industry-4.0”, 2019. str. 12-15 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
203.Šverko, Zoran; Stojković, Nino; Vlahinić, Saša; Markovinović, IvanNoise Improvement for Different BP Filter Designs // 2019 42nd International Convention on Information and Communication Technology, Electronics and Microelectronics (MIPRO) / Marko Koričić, Željko Butković, Petar Biljanović (ur.).
Opatija, Hrvatska: Croatian Society for Information and Communication Technology, Electronics and Microelectronics – MIPRO, 2019. str. 126-131 doi:10.23919/MIPRO.2019.8756818 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
204.Smoljan, Božo; Iljkić, Dario; Smokvina Hanza, SunčanaPrediction of working stress of quenched and tempered steel and cast steel specimen // 18th International Foundrymen Conference - Coexistence of material science and sustainable technology in economic growth
Sisak, Hrvatska, 2019. str. - (pozvano predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
205.Gradišnik, Mitja; Karakatič, Sašo; Mauša, Goran; Beranič, Tina; Heričko, MarjanMožnosti vpeljave umetne inteligence v proces razvoja programske opreme // Proceedings of DSI 2019
Portorož, 2019. str. 1-6 (predavanje, recenziran, cjeloviti rad (in extenso), znanstveni) -
206.Filić, Mia; Filjar, RenatoOn correlation between SID monitor and GPS- derived TEC observations during a massive ionospheric storm development // Proc of 2019 URSI AP-RASC Conference / Dr Amitava Sen Gupta (ur.).
Delhi: URSI, 2019. We-GO6-4, 5 (pozvano predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
207.Glažar, Vladimir; Trp, Anica; Lenić Kristian; Torbarina, FranNumerical analysis of heat transfer in air-water heat exchanger with microchannel coil // E3S Web of Conferences Volume 95 (2019) The 3rd International Conference on Power, Energy and Mechanical Engineering (ICPEME 2019) / Agarwal, Ramesh K. (ur.).
Prag, Češka Republika: EDP Sciences, 2019. 02004, 7 doi:10.1051/e3sconf/20199502004 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
208.Mrzljak, Vedran; Žarković, Božica; Prpić-Oršić, JasnaAir cooling influence on the performance and characteristics of turbocharged direct injection gasoline engine // INTERNATIONAL CONFERENCE TECHNICAL SCIENCES. INDUSTRIAL MANAGEMENT 2019 - PROCEEDINGS / Angelov, Cyril (ur.).
Sofija: Scientific technical union of mechanical engineering “Industry-4.0”, 2019. str. 3-6 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
209.Mrzljak, Vedran; Poljak, Igor; Orović, Josip; Prpić-Oršić, JasnaThermodynamical analysis of heat exchange and fuel consumption in marine re-heat steam generator // INTERNATIONAL SCIENTIFIC CONFERENCE HIGH TECHNOLOGIES. BUSINESS. SOCIETY 2019 - Volume 1 - PROCEEDINGS / Popov, Georgi ; Stavrev, Dimitar (ur.).
Sofija: Scientific technical union of mechanical engineering “Industry-4.0”, 2019. str. 55-58 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
210.Mrzljak, Vedran; Poljak, Igor; Orović, Josip; Prpić-Oršić, JasnaNumerical analysis of real open cycle gas turbine // INTERNATIONAL SCIENTIFIC CONFERENCE HIGH TECHNOLOGIES. BUSINESS. SOCIETY 2019 - Volume 1 - PROCEEDINGS / Popov, Georgi ; Stavrev, Dimitar (ur.).
Sofija: Scientific technical union of mechanical engineering “Industry-4.0”, 2019. str. 51-54 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
211.Mrzljak, Vedran; Poljak, Igor; Orović, Josip; Prpić-Oršić, JasnaInfluence of the ambient temperature change on steam pressure reduction valve exergy destruction and exergy efficiency // INTERNATIONAL SCIENTIFIC CONFERENCE MACHINES. TECHNOLOGIES. MATERIALS 2019 - winter session - Volume 1 - PROCEEDINGS / Popov, Georgi ; Dikova, Tsanka (ur.).
Sofija: Scientific technical union of mechanical engineering “Industry-4.0”, 2019. str. 26-29 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
212.Mrzljak, Vedran; Poljak, Igor; Prpić-Oršić, JasnaNumerical analysis of turbo-generator steam turbine energy efficiency and energy power losses change during the variation in developed power // INTERNATIONAL SCIENTIFIC CONFERENCE MACHINES. TECHNOLOGIES. MATERIALS 2019 - winter session - Volume 1 - PROCEEDINGS / Popov, Georgi ; Dikova, Tsanka (ur.).
Sofija: Scientific technical union of mechanical engineering “Industry-4.0”, 2019. str. 22-25 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
213.Pavletić, Duško; Randić, MiroslavEffect of Welding Parameters on Weld Quality for High-Strength Steel Used at Low Temperature (EH36) // The 4th International Symposium of Maritime Sciences / Uchida, Makoto (ur.).
Kobe: Kobe University, 2019. str. 4-4 (pozvano predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
214.Brnić, Josip; Vukelić, GoranExperimental determination of material mechanical properties and modeling of material behaviour in special environmental conditions // Proceedings of the 6th. European Conference on Computational Mechanics (Solids, Structures and Coupled Problems) ECCM 6 and 7th. European Conference on Computational Fluid Dynamics ECFD 7 / Owen, Roger ; de Borst, Rene ; Reese, Jason ; Pearce, Chris (ur.).
Barcelona: International Center for Numerical Methods in Engineerin (CIMNE), 2019. str. 4361-4367 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
215.Vukelić, Goran; Brnić, JosipUsing experimental and numerical characterization in comparing marine exhaust system stainless steels // Proceedings of the 6th. European Conference on Computational Mechanics (Solids, Structures and Coupled Problems) ECCM 6 and 7th. European Conference on Computational Fluid Dynamics ECFD 7 / Owen, Roger ; de Borst, Rene ; Reese, Jason ; Pearce, Chris (ur.).
Barcelona: International Center for Numerical Methods in Engineerin (CIMNE), 2019. str. 4423-4431 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
216.Braut, Sanjin; Žigulić, Roberto; Štimac Rončević, Goranka; Skoblar, Ante; Mirković, Mihajlo; Bulić, NevenRotor-stator partial rub detection based on Teager-Huang transform // Proceedings of the 10th International Conference on Rotor Dynamics – IFToMM / Lucchesi Cavalca, Katia ; Weber, Hans Ingo (ur.).
Rio de Janeiro: Springer, 2019. str. 252-264 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
217.Čarija, Zoran; Lučin, Ivana; Lučin, Bože; Grbčić, LukaInvestigation of Numerical Simulation Parameters on Fluid Flow Around Trash-Racks // 29th DAAAM International Symposium on intelligent manufacturing and automation
Zadar, Hrvatska: DAAAM International Vienna, 2018. str. 1046-1052 doi:10.2507/29th.daaam.proceedings.149 (ostalo, recenziran, cjeloviti rad (in extenso), znanstveni) -
218.Braut, Sanjin; Žigulić, Roberto; Skoblar, Ante; Štimac Rončević, GorankaFault detection based on instantaneous angular speed measurement and variational mode decomposition // MATEC Web of Conferences 211, 18006 (2018), VETOMAC XIV / Maia, Nuno ; Dimitrovová, Zuzana (ur.).
Lisabon: EDP Sciences, 2018. str. 1-6 doi:10.1051/matecconf/201821118006 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
219.Čalić, Bruno; Kolić, DamirAir Weight and Air Buoyancy Influences on Total Ship Buoyancy // SNAME SMC 2018 Proceedings / Sanders, Gene (ur.).
Providence (RI): SNAME, 2018. str. 1-8 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
220.Špoljar, Darko; Lenac, Kristijan; Žigman, Dubravko; Marović, MislavA mobile network-based GNSS anti-spoofing // Proc of 26th Telecommunications Forum TELFOR 2018 / Paunović, Đorđe ; Nešković, Aleksandar ; Reljin, Irini (ur.).
Beograd: Telfor, 2018. 978-1-5386-7171-9/18, 3 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
221.Filić, Mia; Špoljar, Darko; Filjar, RenatoGNSS positioning performance monitoring using anonymised raw pseudoranges in ITS // Proc of 38th Conference on Transportation Systems with International Participation Automation in Transportation 2018 / Željko Šakić (ur.).
Zagreb: Hrvatsko društvo za komunikacije, računarstvo, elektroniku, mjerenja I automatiku (KoREMA), 2018. str. 127-130 (predavanje, recenziran, cjeloviti rad (in extenso), znanstveni) -
222.Stefanović-Marinović, Jelena; Troha, Sanjin; Anđelković, Boban; Milovančević, Miloš; Rončević, BranimirSelection of the Appropriate Reversible Two-Carrier Planetary Gear Train // 4th International Conference Mechanical Engineering in XXI Century
Niš, 2018. str. 173-178 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
223.Mrzljak, Vedran; Perčić, Gregor; Prpić-Oršić, JasnaGAS TURBINE UPGRADE WITH HEAT REGENERATOR - NUMERICAL ANALYSIS OF ADVANTAGES AND DISADVANTAGES // Third International Scientific Conference-Winter Session-"Industry 4.0 2018" - PROCEEDINGS / Popov, Georgi ; Ovtcharova, Jivka (ur.).
Sofija: Scientific technical union of mechanical engineering “Industry-4.0”, 2018. str. 184-187 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
224.Gljušćić, Petar; Zelenika, Saša; Kamenar, ErvinCharacterisation of Performances of Thermoelectric Generators for Energy Harvesting Applications // Proceedings of the 29th DAAAM International Symposium / Katalinić, B. (ur.).
Beč: DAAAM International Vienna, 2018. str. 25-30 doi:10.2507/29th.daaam.proceedings.004 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
225.Arrigoni, Tea; Zelenika, Saša; Kamenar, Ervin; Schnurrer-Luke-Vrbanić, TeaDesign of the Prototype of a Full Arm Mechatronics Rehabilitation Device // Proceedings of the 29th DAAAM International Symposium / Katalinić, B. (ur.).
Beč: DAAAM International Vienna, 2018. str. 16-24 doi:10.2507/29th.daaam.proceedings.003 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
226.Gljušćić, Petar; Zelenika, SašaCoupled Electromechanical Numerical Modelling of Piezoelectric Vibration Energy Harvesters // Proceedings of the 29th DAAAM International Symposium / Katalinić, B. (ur.).
Beč: DAAAM International Vienna, 2018. str. 9-15 doi:10.2507/29th.daaam.proceedings.002 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
227.Filić, Mia; Filjar, RenatoModelling the Relation between GNSS Positioning Performance Degradation, and Space Weather and Ionospheric Conditions using RReliefF Features Selection // Proc of ION GNSS+ 2018 Meeting / Van Diggelen, F (ur.).
Washington (MD): Insitute of Navigation (ION), 2018. str. 1999-2006 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
228.Jakoplić, Alen; Franković, Dubravko; Kirinčić, Vedran; Havelka , JurajShort-term photovoltaic power forecasting using cloud tracking methods // MEDPOWER2018 / Kuzle, Igor ; Holjevac, Ninoslav ; Capunder, Tomislav ; Pandžić , Hrvoje (ur.).
Dubrovnik, 2018. str. 1-1 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
229.Pita Costa, Joao; Galinac Grbac, TihanaA methodology to evaluate the evolution of networks using topological data analysis // Proceedings of the 20th International Multiconference INFORMATION SOCIETY - IS 2017 Volume C / Mladenić, Dunja ; Grobelnik, Marko (ur.).
Ljubljana: Institut Jožef Stefan, 2018. str. 43-47 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
230.Lennart Josefson, Stephen van Duin, Bianca de Carvalho Pinheiro, Nana Yang, Luo Yu, Albert Zamarin, Heikki Remes, Frank Roland, Marco Gaiotti, Naoki Osawa, Agnes Marie Horn, Myung Hyun Kim, Brajendra MishraReport of the COMMITTEE V.3 MATERIALS AND FABRICATION TECHNOLOGY // Proceedings of the 20th International Ship and Offshore Structures Congress (ISSC 2018) / Kaminski, Miroslav Lech ; Rigo, Phillip. (ur.).
Liege : Amsterdam: IOS Press, 2018. str. 143-193 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
231.Mohović, Marino; Mauša, Goran; Galinac Grbac, TihanaUsing Threshold Derivation of Software Metrics for Building Classifiers in Defect Prediction // Proceedings of SQAMIA 2018 / Budimac, Zoran (ur.).
Novi Sad: University of Novi Sad, Faculty of Sciences, Department of mathematics and informatics, 2018. 11, 9 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
232.Miletić, Matija; Vukušić, Monika; Mauša, Goran; Galinac Grbac, TihanaCross-release code churn impact on effort-aware software defect prediction // Proceeding of MIPRO 2018
Rijeka: Hrvatska udruga za informacijsku i komunikacijsku tehnologiju, elektroniku i mikroelektroniku - MIPRO, 2018. str. 1460-1466 doi:10.23919/MIPRO.2018.8400263 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
233.Štimac Rončević, Goranka; Rončević, Branimir; Skoblar, Ante; Braut, SanjinAvoidance of Numerical Singularities in Free Vibration Analysis of Euler-Bernoulli Beams using Green Functions // WSEAS Transactions on Applied and Theoretical Mechanics
Dubrovnik, Hrvatska, 2018. str. 117-122 (pozvano predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
234.Uran, Valter; Doboviček, Sandro; Hadjina, Marko; Perinić, MladenAN IMPACT OF PLM SYSTEM ON COLLABORATION ACTIVITIES IN AUTOMOTIVE INDUSTRY // Proceedings: Management of Technology – Step to Sustainable Production / Čosić, Predrag (ur.).
Zagreb: ITG Zagreb, 2018. str. 21-30 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
235.Čalić, Bruno; Kolić, DamirDevelopment aspects of chosen underwater vehicles // Book of Proceedings: The 23rd Symposium on the Theory and Practice of Shipbuilding / Blagojević, Branko (ur.).
Split: University of Split, Faculty of Electrical Engineering, Mechanical Engineering and Naval Architecture, 2018. str. 444-453 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
236.Iljkić, Dario; Gržinić, Luciano; Vratović, GoranAktivacija austenitnog nehrđajućeg čelika za postupak bestrujnoga nanošenja Ni-P prevlake // 8th International conference – Mechanical Technologies and Structural Materials 2018, MTSM2018
Split, Hrvatska, 2018. str. - (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
237.Smoljan, Božo; Iljkić, Dario; Smokvina Hanza, Sunčana; Štic, Lovro; Jokić, MilenkoNumerical modelling of welding of martensitic steel // 12th International Seminar “Numerical Analysis of Weldability”
Leibnitz, Austrija, 2018. str. - (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
238.Glažar, Vladimir; Trp, Anica; Lenić, Kristian; Kirinčić, MateoExperimental Analysis of Air-Water Heat Exchanger with Microchannel Coil Exposed to Different Working Parameters // Proceedings of the ISES EuroSun 2018 Conference – 12th International Conference on Solar Energy for Buildings and Industry / Haberle, Andreas (ur.).
Freiburg: International Solar Energy Society, 2018. str. 345-356 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
239.Matulja, Tin; Hadjina, Marko; Katkhuda, Damir EdwardMethodology for Ecologically Sustainable Ship Surface Pre-Painting Process Selection Based on Ahp Method // In-Tech 2018 Proceedings / Car, Zlatan ; Kudlaček, Jan (ur.).
Jaromer: Tisk as, s.r.o., 2018. str. 1-5 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
240.Hadjina, Marko; Matulja, Tin; Jocić, Dario; Brubnjak, FeručoMethodology for Virtual Reality Design of Kvarner Guc Towards Preserving Croatian Shipbuilding Heritage // Renewal of Industrial Heritage / Mrak, Iva ; Palinić, Nana (ur.).
Rijeka: Pro Torpedo Rijeka, 2018. str. 126-128 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
241.Pavković, Branimir; Delač, BorisSatni meteorološki podaci za referentne postaje u Hrvatskoj // Zbornik radova 16. skup o prirodnom plinu, toplini i vodi / 9th International Gas, Heat and Water Conference / Raos, Pero (ur.).
Osijek: Strojarski fakultet Sveučilišta u Slavonskom Brodu, 2018. str. 179-188 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
242.Randić, Miroslav; Pavletić, Duško; Bevandić, IgorUtjecaj načina zavarivanja na radijus ruba šava u zavarenom spoju // Zbornik radova XXIII Simpozija Teorija i praksa brodogradnje / Branko Blagojević i drugi (ur.).
Split: Sveučilište u Splitu, Fakultet elektrotehnike strojarstva i brodogradnje, 2018. str. 286-292 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
243.Vranković, Ana; Galinac Grbac, TihanaReplication of Quantitative Analysis of Fault Distributions on Open Source Software System // Proceedings of the Seventh Workshop on Software Quality Analysis, Monitoring, Improvement, and Applications / Budimac, Zoran (ur.).
Novi Sad, 2018. 22, 9 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
244.Vranković, Ana; Galinac Grbac, Tihana; Blašković, BrunoA case study on reliable Erlang communication in open platforms based on Scribble // 2018 41st International Convention on Information and Communication Technology, Electronics and Microelectronics (MIPRO)
Opatija, Hrvatska, 2018. str. 1472-1475 (ostalo, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
245.Kegalj, Igor; Traven, Luka; Šebelja, IvaSmanjenje onečišćenja okoliša primjenom biogoriva u brodskim motorima s unutrašnjim izgaranjem // Proceedings book of 1st International Conference the Holistic Approach to Environment / Štrkalj, Anita ; Glavaš, Zoran ; Kalambura Sanja (ur.).
Sisak: Udruga za promicanje cjelovitog pristupa okolišu, 2018. str. 330-336 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
246.Kirinčić, Vedran; Franković, Dubravko; Radulović, Duško; Jakoplić, AlenTowards a low-carbon island society by strong implementation of electromobility // Proceedings of International Conference on Innovative Technologies 2018 / Car, Zlatan ; Kudlaček, Jan (ur.).
Zagreb, 2018. str. 169-172 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
247.Franković, Dubravko; Rosanda, Boris; Jakoplić, Alen; Kirinčić, VedranPower supply system for railway applications // Proceedings of International Conference on Innovative Technologies 2018 / Car, Zlatan ; Kudlaček, Jan (ur.).
Zagreb, 2018. str. 161-164 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
248.Jakoplić, Alen; Franković, Dubravko; Kirinčić, Vedran; Sterpin, IngridShort-term solar forecasting based on sky images to enable PV integration // Proceedings of International Conference on Innovative Technologies 2018 / Car, Zlatan ; Kudlaček, Jan (ur.).
Zagreb, 2018. str. 165-167 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
249.Batistić, Luka; Tomić, MladenOverview of indoor positioning system technologies // MIPRO 2018, 41st International Convention Proceedings / Biljanović, Petar (ur.).
Opatija: Hrvatska udruga za informacijsku i komunikacijsku tehnologiju, elektroniku i mikroelektroniku - MIPRO, 2018. 17895418, 6 doi:10.23919/MIPRO.2018.8400090 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
250.Hržić, Franko; Sušanj, Diego; Lenac, KristijanOptimal beacon positioning for indoor drone navigation // Proceedings of the 12th Annual Baška GNSS Conference (2018)
Baška, Hrvatska, 2018. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
251.Plavšić, Tomislav; Valentić, Vladimir; Franković, DubravkoHydro Pumped Storage Power Plants perspectives in SEERC Region // Second South East European Regional CIGRÉ Conference
Kijev, 2018. str. 1-9 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
252.Mrzljak, Vedran; Blažević, Sebastijan; Anđelić, Nikola; Car, ZlatanEXHAUST GAS EMISSIONS FROM TURBOCHARGED DIRECT INJECTION DIESEL ENGINE DURING THE FUEL MASS FLOW VARIATION // Proceedings of International Conference on Innovative Technologies, IN-TECH 2018 / Car, Zlatan ; Kudláček, Jan (ur.).
Zagreb: Faculty of Engineering, University of Rijeka, 2018. str. 35-38 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
253.Mrzljak, Vedran; Senčić, Tomislav; Banovac, AntonTHE INFLUENCE OF FUEL THERMODYNAMICAL PROPERTIES AND INJECTION RATE ON INJECTOR CONTRACTION COEFFICIENT AND REYNOLDS NUMBER – NUMERICAL ANALYSIS // Proceedings of International Conference on Innovative Technologies, IN-TECH 2018 / Car, Zlatan ; Kudláček, Jan (ur.).
Zagreb: Faculty of Engineering, University of Rijeka, 2018. str. 17-20 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
254.Lopac, Nikola; Bulić, NevenEstimation of the induction motor stator current frequency // Proceedings of International Conference on Innovative Technologies, IN-TECH 2018 / Car, Zlatan ; Kudláček Jan (ur.).
Zagreb: Faculty of Engineering, University of Rijeka, 2018. str. 183-186 (ostalo, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
255.Lanc, Domagoj; Turkalj, Goran; Kvaternik, Sandra; Pešić, IgorBUCKLING ANALYSIS OF THERMALLY LOADED FG BOX BEAMS // USB Proceedings of eight international conference- Thin walled structures / Camotim, D ; Silvestre, N. ; Dinis, P.B. ; Basaglia, C. ; Landesmann, A. (ur.).
Lisabon: DECivil/IST/UL, 2018. str. 1-10 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
256.Smoljan, Božo; Iljkić, Dario; Smokvina Hanza, Sunčana; Gržinić, Luciano; Jokić, Milenko; Štic, LovroAn Application of Jominy test results in Computer Simulation of Steel Quenching // THERMEC'2018, International Conference on PROCESSING & MANUFACTURING OF ADVANCED MATERIALS, Processing, Fabrication, Properties, Applications
Pariz, Francuska, 2018. str. - (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
257.Smoljan, Božo; Iljkić, Dario; Štic, Lovro; Smokvina Hanza, Sunčana; Gržinić, Luciano; Vratović, GoranNumerical modelling of welded joints properties // International Conference MATRIB 2018, MATERIALS, TRIBOLOGY, RECYCLING
Vela Luka, Hrvatska, 2018. str. - (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
258.Smoljan, Božo; Iljkić, Dario; Smokvina Hanza, Sunčana; Jokić, Milenko; Štic, LovroComputer simulation of mechanical properties and distortions during the quenching of steel // ModTech 2018 International Conference - Modern Technologies in Industrial Engineering
Constanţa, Rumunjska, 2018. str. - (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
259.Smoljan, Božo; Iljkić, Dario; Smokvina Hanza, Sunčana; Štic, Lovro; Borić, Andrej; Jokić, Milenko; Senčič, Bojan; Vertnik, RobertMathematical modelling of controlled cooling and properties of hot rolled steel // 10th International Symposium on Machine and Industrial Design in Mechanical Engineering (KOD 2018)
Novi Sad, Srbija, 2018. str. - doi:10.1088/1757-899X/393/1/012035 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
260.Iljkić, Dario; Smoljan, Božo; Maretić, Mauro; Smokvina Hanza, Sunčana; Štic, Lovro; Vratović, GoranAn activation of electroless process of ni-p depositing on austenitic stainless steel // 27TH INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS - METAL 2018
Brno, Češka Republika, 2018. str. - (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
261.Smoljan, Božo; Iljkić, Dario; Smokvina Hanza, Sunčana; Štic, Lovro; Gržinić, Luciano; Vratović, GoranComputer simulation of controlled cooling of continues casted and rolled steel bar // 17th INTERNATIONAL FOUNDRYMEN CONFERENCE - Hi-tech casting solution and knowledge based engineering
Opatija, Hrvatska, 2018. str. - (pozvano predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
262.Hržić, Franko; Jansky, Vanja; Sušanj, Diego; Gulan, Gordan; Kožar, Ivica; Jeričević, ŽeljkoInformation entropy measures and clustering improve edge detection in medical X-ray images // Proceedings of the 2018 41st International Convention on Information and Communication Technology, Electronics and Microelectronics (MIPRO) / Skala, Karolj ; Koricic, Marko ; Galinac Grbac, Marko ; Cicin-Sain, Marina ; Sruk, Vlado ; Ribaric, Slobodan ; Gros, Stjepan ; Vrdoljak, Boris ; Mauher, Mladen ; Tijan, Edvard ; Pale, Predrag ; Janjic, Matej (ur.).
Rijeka: Hrvatska udruga za informacijsku i komunikacijsku tehnologiju, elektroniku i mikroelektroniku - MIPRO, 2018. str. 164-166 doi:10.23919/mipro.2018.8400032 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
263.Volarić, Ivan; Sučić, ViktorSparse TFD Reconstruction Using the Information on the Instantaneous Number of Signal Components // Proceedings of International Conference on Innovative Technologies IN-TECH 2018
Zagreb, Hrvatska, 2018. str. 9-12 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
264.Volarić, Ivan; Sučić, ViktorOn the L0-Norm Based Sparse Time-Frequency Distribution Reconstruction // Proceeding of the 2018 International Conference on Broadband Communications for Next Generation Networks and Multimedia Applications CoBCom 2018
Graz, Austrija, 2018. str. 1-8 doi:10.1109/COBCOM.2018.8443966 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
265.Volarić, Ivan; Sučić, ViktorLocalized Renyi Entropy Based Sparse TFD Reconstruction // Proceedings of the Second International Balkan Conference on Communications and Networking BalkanCom 2018
Podgorica, Crna Gora, 2018. str. 1-5 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
266.Grbac Babić, Sanja; Galinac Grbac, Tihana; Lerga, JonatanCommunity Structure of a Complex Software-System in Evolution // 41st International Convention on Information and Communication Technology, Electronics and Microelectronics (MIPRO 2018)
Opatija, Hrvatska, 2018. str. 1467-1471 doi:10.23919/MIPRO.2018.8400264 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
267.Basan, Robert; Marohnić, TeaMultiaxial Fatigue Life Calculation Model for Engineering Components in Rolling-Sliding Contact // MATEC Web of Conferences / Pantelakis, Spiros ; Koubias, Stavros (ur.).
Hios, Grčka: EDP Sciences, 2018. str. 1-8 doi:10.1051/matecconf/201818802016 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
268.Saulig, Nicoletta; Milanović, Željka; Lerga, Jonatan; Griparić, KarloOn the Selection of the Proper Number of Classes in TFD Segmentation for Extraction of Useful Information Content from Noisy Signals // 3rd International Conference on Smart and Sustainable Technologies Splitech 2018
Split, 2018. str. 1-5 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
269.Ivanković, Igor; Brnobić, Dalibor; Skok, Srdjan; Šturlić, Ivan; Rubeša, RenataTime Delay Aspect for Basic Line Protection Functions with Synchrophasor in WAMPAC System // Energycon 2018 IEEE International Energy Conference / Kyriakides, Elias (ur.).
Limassol: Institute of Electrical and Electronics Engineers (IEEE), 2018. str. 1-6 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
270.Filić, MOn development of the forecasting model of GNSS positioning performance degradation due to space weather and ionospheric conditions // Proc of 2nd URSI Atlantic Radio Science Meeting AT-RASC 2018 / Doherty, P ; Franceschi, G ; Stanislawska, I ; Datta-Barua, S ; Elvidge, S (ur.).
Lahti: URSI, 2018. G-05-4, 4 (pozvano predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
271.Filjar, Renato; Filić, Mia; Mirakhmudov, ErkinCategorisation of space weather and GNSS positioning quality indicators for estimation of GNSS positioning quality degradation // Proc of 11th Annual Baška GNSS Conference / Filić, M ; Brčić, D ; Jugović, A ; Kos, S (ur.).
Rijeka: Sveučilište u Rijeci Pomorski fakultet ; The Royal Institute of Navigation, London, UK, 2018. str. 63-75 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
272.Filić, Mia; Filjar, Renato; Weng, JingnongA comparative study of forecasting methods for space weather-caused GNSS positioning performance degradation // Proc of 11th Annual Baška GNSS Conference / Filić, M ; Brčić, D ; Jugović, A ; Kos, S (ur.).
Rijeka: Sveučilište u Rijeci Pomorski fakultet ; The Royal Institute of Navigation, London, UK, 2018. str. 31-45 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
273.Filić, Mia; Grubišić, Luka; Filjar, RenatoImprovement of standard GPS position estimation algorithm through utilization of Weighted Least-Square approach // Proc of 11th Annual Baška GNSS Conference / Filić, Mia ; Brčić, David ; Jugović, Alen ; Kos, Serdjo (ur.).
Rijeka: Sveučilište u Rijeci Pomorski fakultet ; The Royal Institute of Navigation, London, UK, 2018. str. 7-19 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
274.Filić, Mia; Filjar, RenatoSmartphone GNSS positioning performance improvements through utilisation of Google Location API // Proc of 41 st International Convention on Information and Communication Technology, Electronics and Microelectronics (MIPRO) / Skala, K (ur.).
Opatija: Hrvatska udruga za informacijsku i komunikacijsku tehnologiju, elektroniku i mikroelektroniku - MIPRO, 2018. str. 507-510 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
275.Prpić-Oršić, Jasna; Sasa, Kenji; Valčić; Marko; Faltinsen, Odd MagnusUncertainties of Ship Speed Loss Evaluation under Real Weather Conditions // Proceedings of the International Conference on Offshore Mechanics and Arctic Engineering - OMAE
Madrid, Španjolska: American Society of Mechanical Engineers (ASME), 2018. OMAE2018-78514, 7 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
276.Braidotti, Luca; Prpić-Oršić, Jasna; Valčić, Marko; Trincas, Giorgio; Bucci, VittorioFuzzy Analytical Hierarchical Process to Assess Weights of Importance in Ship Operation Risk Assessment // Proceedings of NAV 2018: 19th International Conference on Ship & Maritime Research - Technology and Science for the Ships of the Future / Marino, Alberto ; Bucci, Vittorio (ur.).
Amsterdam: IOS Press, 2018. str. 88-96 doi:10.3233/978-1-61499-870-9-88 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
277.Mrzljak, Vedran; Žarković, Božica; Prpić-Oršić, JasnaLIQUID FUEL TEMPERATURE, PRESSURE AND INJECTION RATE INFLUENCE ON INJECTOR NOZZLE REYNOLDS NUMBER AND CONTRACTION COEFFICIENT // XXVI INTERNATIONAL SCIENTIFIC CONFERENCE - Trans & MOTAUTO ’18 - PROCEEDINGS / Kolev, Petar (ur.).
Sofija: Scientific technical union of mechanical engineering “Industry-4.0”, 2018. str. 64-67 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
278.Mrzljak, Vedran; Žarković, BožicaNATURALLY ASPIRATED GASOLINE ENGINE UPGRADE WITH TURBOCHARGER - NUMERICAL INVESTIGATION OF CHANGE IN OPERATING PARAMETERS // XXVI INTERNATIONAL SCIENTIFIC CONFERENCE - Trans & MOTAUTO ’18 - PROCEEDINGS / Kolev, Petar (ur.).
Sofija: Scientific technical union of mechanical engineering “Industry-4.0”, 2018. str. 60-63 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
279.Žic, Jasmina; Žic, SamirExperimental analysis of market demand influence on greenhouse gas emissions in supply chains // Proceedings of 10th International Scientific Conference on Management of Technology - Step to Sustainable Production (MOTSP 2018) / Ćosić, Predrag - Zagreb : Croatian Association for PLM, 2018
Primošten, Hrvatska, 2018. str. 128-136 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
280.Sladic, Sasa; Kolić, Damir; Zigulic, Roberto; Bosich, Daniele;ROBUST ACTIVE FRONT END APPROACH IN CRANE APPLICATIONS. FOR PORT COMPETITIVENESS // EEEIC 2018 / Leonowitz, Zbignew (ur.).
Palermo: Institute of Electrical and Electronics Engineers (IEEE), 2018. 2018, 8 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
281.Kamenar, Ervin; Korda, Milan; Zelenika, Saša; Mezić, Igor; Maćešić, SenkaKoopman-based model predictive control of a nanometric positioning system // Proceedings of the 18th EUSPEN International Conference / Billington, D. ; Leach, R. K. ; Phillips, D. ; Riemer, O. ; Savio, E. (ur.).
Cranfield: EUSPEN, 2018. str. 75-76 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
282.Perčić, Marko; Zelenika, Saša; Mezić, Igor; Peter, Robert; Krstulović, NikšaExperimental approach to establishing a model of nanoscale friction // Proceedings of the 18th EUSPEN International Conference / Billington, D. ; Leach, R. K. ; Phillips, D. ; Riemer, O. ; Savio, E. (ur.).
Cranfield: EUSPEN, 2018. str. 63-64 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
283.Kamenar, Ervin; Zelenika, SašaCharacterisation of positioning performances of a mechatronics device actuated via a frictionless voice-coil actuator // Proceedings of the 18th EUSPEN International Conference / Billington, D. ; Leach, R. K. ; Phillips, D. ; Riemer, O. ; Savio, E. (ur.).
Cranfield: EUSPEN, 2018. str. 61-62 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
284.Mrzljak, Vedran; Prpić-Oršić, Jasna; Poljak, IgorCOMPARISON OF FUEL COSTS BETWEEN COGES AND DIESEL-ELECTRIC PROPULSION SYSTEMS FOR CONVENTIONAL PASSENGER CRUISER PROPULSION // INTERNATIONAL SCIENTIFIC CONFERENCE - TECHNICS. TECHOLOGIES. EDUCATION. SAFETY. 2018 - PROCEEDINGS / Tokarev, Alexander (ur.).
Sofija: Scientific technical union of mechanical engineering “Industry-4.0”, 2018. str. 129-132 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
285.Dejhalla, Roko; Kolić, Damir; Majnarić, Darin; Majnarić, Ivor; Andrun, Martina; Tomašić, MihovilDesign and Development of Waterbikes at the Faculty of Engineering - University of Rijeka // SOME 2018 The 6th Annual International SOME Symposium / Kokarakis, John (ur.).
Atena: SNAME, 2018. str. 1-7 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
286.Kolić, Damir; Brandić, Vanda; Jaki, Doroteja; Novak, Lino.Gantt chart analysis to improve shipbuilding panel line assembly // SOME 2018, the 6th Annual International SOME Symposium (Ship Operations, Management and Economics) / Dimitrios V. Lyridis (ur.).
Atena: SNAME, 2018. str. 1-8 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
287.Mrzljak, Vedran; Poljak, Igor; Žarković, BožicaAIR COOLED DIRECT INJECTION DIESEL ENGINE MAIN OPERATING PARAMETERS ANALYSIS DURING THE CHANGE IN ROTATIONAL SPEED // XI INTERNATIONAL CONFERENCE FOR YOUNG RESEARCHERS - TECHNICAL SCIENCES. INDUSTRIAL MANAGEMENT - 2018 - PROCEEDINGS / Angelov, Cyril (ur.).
Sofija: Scientific technical union of mechanical engineering “Industry-4.0”, 2018. str. 33-36 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
288.Mrzljak, Vedran; Prpić-Oršić, Jasna; Žarković, BožicaMEAN PRESSURE OF MECHANICAL LOSSES EQUATION FOR MARINE SLOW SPEED TWO-STROKE DIESEL ENGINE // INTERNATIONAL SCIENTIFIC CONFERENCE - HIGH TECHNOLOGIES. BUSINESS. SOCIETY - 2018 - PROCEEDINGS / Popov, Georgi ; Stavrev, Dimitar (ur.).
Sofija: Scientific technical union of mechanical engineering “Industry-4.0”, 2018. str. 60-63 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
289.Mrzljak, Vedran; Poljak, Igor; Jurić, AntonioEXERGY EFFICIENCY AND EXERGY DESTRUCTION CHANGE OF LOW POWER STEAM TURBINE WITH ONE CURTIS STAGE DURING THE VARIATION IN DEVELOPED POWER // INTERNATIONAL SCIENTIFIC CONFERENCE - HIGH TECHNOLOGIES. BUSINESS. SOCIETY - 2018 - PROCEEDINGS / Popov, Georgi ; Stavrev, Dimitar (ur.).
Sofija: Scientific technical union of mechanical engineering “Industry-4.0”, 2018. str. 56-59 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
290.Mrzljak, Vedran; Senčić, Tomislav; Prpić-Oršić, JasnaENERGY EFFICIENCY AND ENERGY POWER LOSSES OF THE TURBO-GENERATOR STEAM TURBINE FROM LNG CARRIER PROPULSION SYSTEM // INTERNATIONAL SCIENTIFIC CONFERENCE - MACHINES. TECHNOLOGIES. MATERIALS - 2018 - WINTER SESSION - PROCEEDINGS / Popov, Georgi ; Dikova, Tsanka (ur.).
Sofija: Scientific technical union of mechanical engineering “Industry-4.0”, 2018. str. 27-30 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
291.Mrzljak, Vedran; Poljak, Igor; Žarković, BožicaCHANGE IN OPERATING PARAMETERS OF TURBOCHARGED DIRECT INJECTION DIESEL ENGINE DURING THE INJECTED FUEL MASS FLOW VARIATION // INTERNATIONAL SCIENTIFIC CONFERENCE - MACHINES. TECHNOLOGIES. MATERIALS - 2018 - WINTER SESSION - PROCEEDINGS / Popov, Georgi ; Dikova, Tsanka (ur.).
Sofija: Scientific technical union of mechanical engineering “Industry-4.0”, 2018. str. 23-26 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
292.Brandić, Vanda; Kolić, DamirPWBS BEST PRACTICE ANALYSIS OF TWO SHIPYARDS // Seventh Conference on Marine Technology in memoriam of academic Zlatko Winkler / Zamarin, Albert (ur.).
Rijeka: Sveučilište u Rijeci, 2018. str. 1-14 (predavanje, domaća recenzija, cjeloviti rad (in extenso), znanstveni) -
293.Brčić, Marino; Čanađija, Marko; Brnić, JosipInfluence of imperfections on double walled carbon nanotube mechanical properties // ANM2017, 9th International Conference on Advanced Nano Materials
Aveiro, Portugal, 2017. str. 17397-17403 doi:10.1016/j.matpr.2018.06.041 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
294.Žigulić, Roberto; Blažević, Sebastijan; Skoblar, Ante; Braut, sanjinThe fault of the working table rolling bearing as the possible cause of the irregularities in work of vertical lathe machine // Proceedings of Technological forum 2017 / Jan Sucharek, Viktor Kreibich (ur.).
Prag: TISK, s.r.o., Jaromer, 2017. str. 174-180 (poster, recenziran, cjeloviti rad (in extenso), znanstveni) -
295.Sikirica, Nenad; Malic, Emanuela; Rumora, Ivan; Filjar, RenatoExploitation of google GNSS measurement API for risk assessment of GNSS applications // Proc of 25th Telecommunications Forum (TELFOR) 2017 / Paunović, Đ. (ur.).
Beograd: Institute of Electrical and Electronics Engineers (IEEE), 2017. str. 293-296 doi:10.1109/telfor.2017.8249343 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
296.Špoljar, Darko; Filić, Mia; Filjar, RenatoCorrelation between geomagnetic field disruption and GPS positioning performance degradation during rapidly developing space weather storm // Proc of 37th KoREMA Automation in Transportation Conference / Šakić, Ž. (ur.).
Zagreb: Hrvatsko društvo za komunikacije, računarstvo, elektroniku, mjerenja I automatiku (KoREMA), 2017. str. 11-14 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
297.Zoubek, Michael; Kudláček, Jan; Kreibich, Viktor; Matas, F.; Car, ZlatanANTISTATIC WATER-SOLUBLE PAINTS // International Conference on Innovative Technologies, IN-TECH 2017 / Pepelnjak, Tomaž ; Car, Zlatan ; Kudláček, Jan (ur.).
Ljubljana, 2017. str. 271-274 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
298.Janeš, Gordan; Car, Zlatan; Puškarić, MiroslavMODIFIED GENETIC ALGORITHM IN CHABOCHE MODEL PARAMETERS IDENTIFICATION // International Conference on Innovative Technologies, IN-TECH 2017 / Pepelnjak, Tomaž ; Car, Zlatan ; Kudláček, Jan (ur.).
Ljubljana, 2017. str. 85-88 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
299.Sokac, Mario; Željko, Santoši; Budak, Igor; Car, Zlatan; Đorđe, VukelićCOMBINATION OF CONTACT AND OPTICAL 3D DIGITIZING METHODS FOR THEIR APPLICATION IN REVERSE ENGINEERING // International Conference on Innovative Technologies, IN-TECH 2017 / Pepelnjak, Tomaž ; Car, Zlatan ; Kudláček, Jan (ur.).
Ljubljana: Jaromer, Czech Republic : Faculty of Engineering, University of Rijeka, 2017. str. 65-68 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
300.Tomić, Draško; Puškarić, Miroslav; Car, ZlatanIn silico testing of the toxicity for some anticancer herbal compounds // Proceedings of International Conference on Innovative Technologies / Pepelnjak Tomaž ; Car Zlatan ; Kudláček Jan (ur.).
Jaromer: Faculty of Engineering, University of Rijeka, 2017. str. 217-220 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
301.Lenac, Kristijan; Cuzzocrea, Alfredo; Mumolo, EnzoAn effective and efficient hybrid scan matching algorithm for mobile object applications // Proceedings of the Symposium on Applied Computing
Marrakesh, Maroko: ACM, 2017. str. 522-528 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
302.Kolić, Damir; Sladić, Saša; Storch, Richard LeeLean IHOP Transformation of Shipyard Erection Block Construction // SNAME Maritime Convention 2017 / Stokes, Edward (ur.).
Houston (TX): SNAME, 2017. str. 1-7 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
303.Kolić, Damir; Bećirević, Armin; Storch, Richard LeeMETHODOLOGY FOR EFFICIENT APPLICATION OF 3D SHIP MODELLING SOFTWARE // International Conference on Computer Applications in Shipbuilding / Blakely, Trevor (ur.).
London : Delhi: Royal Institute of Naval Architects, 2017. str. 1-7 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
304.Mrzljak, Vedran; Žarković, Božica; Prpić-Oršić, JasnaMARINE SLOW SPEED TWO-STROKE DIESEL ENGINE - NUMERICAL ANALYSIS OF EFFICIENCIES AND IMPORTANT OPERATING PARAMETERS // INTERNATIONAL SCIENTIFIC CONFERENCE INDUSTRY 4.0 PROCEEDINGS / Popov, Georgi ; Ovtcharova, Jivka (ur.).
Sofija: Scientific technical union of mechanical engineering “Industry-4.0”, 2017. str. 65-68 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
305.Mrzljak, Vedran; Žarković, Božica; Poljak, IgorDiesel engine exhaust gas emissions invcestigation by using measurement data and numerical analysis // International scientific conferenca "Industry 4.0" : proceedings / Popov, Georgi ; Ovtcharova, Jivka (ur.).
Sofija: Scientific technical union of mechanical engineering “Industry-4.0”, 2017. str. 61-64 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
306.Mrzljak, Vedran; Žarković, Božica; Poljak, IgorEnergy and exergy analysis of sea water pump fot the main condenser cooling in the LNG carrier steam propulsion system // International scientific conference "Mathematical modeling" : proceedings / Firsov, Andrey (ur.).
Sofija: Scientific technical union of mechanical engineering “Industry-4.0”, 2017. str. 92-95 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
307.Nakić, Iva; Ištoković, David; Perinić, Mladen; Cukor, GoranImplementacija aditivne tehnologije u medicini // Proceedings of 7th International Conference "Mechanical Technologies and Structural Materials" MTSM 2017 / Jozić, Sonja ; Lela, Branimir (ur.).
Split: Croatian Society for Mechanical Technologies, 2017. str. 89-97 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
308.Miletić, Matija; Vukušić, Monika; Mauša, Goran; Galinac Grbac, TihanaRelationship Between Design and Defects for Software in Evolution // Proceeding of SQAMIA 2017 / Budimac, Zoran (ur.).
Novi Sad: University of Novi Sad, 2017. str. 10:1-10:10 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
309.Lacković, Dario; Tomić, MladenPerformance analysis of virtualized VPN endpoints // MIPRO 2017 40th Jubilee International Convention Proceedings
Opatija, Hrvatska, 2017. str. 466-471 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
310.Smoljan, Božo; Iljkić, Dario; Senčič, Bojan; Vertnik, RobertNumerical model of controlled cooling of steel hot rolled bars // Proceedings of the 29th ASM Heat Treating Society Conference & Exposition, “Heat Treat 2017”
Columbus (OH), Sjedinjene Američke Države, 2017. str. - (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
311.Smoljan, Božo; Iljkić, Dario; Smokvina Hanza, Sunčana; Štic, Lovro; Borić, Andrej; Rubeša, DomagojPrediction of steel properties during controlled cooling of hot rolled steel // Proceedings of the International Conference on Materials, Corrosion, Heat Treatment, Testing and Tribology 2017, MTECH 2017
Zadar, Hrvatska, 2017. str. 1-8 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
312.Kekelj, Matija; Bulic, Neven; Sucic, VictorAn FPGA implementation of the Goertzel algorithm in a Non- Destructive Eddy current Testing // Signals and Systems (ICSigSys), 2017 International Conference on
Bali, Indonezija: Institute of Electrical and Electronics Engineers (IEEE), 2017. str. - doi:10.1109/icsigsys.2017.7967036 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
313.Družeta, Siniša; Škifić, Jerko; Grbčić, LukaModel strujanja vode kroz djelomično zapunjeni tunel sa ugrađenom cijevi // Zbornik radova Osmog susreta Hrvatskog društva za mehaniku / Penava, Davorin ; Guljaš, Ivica ; Bošnjak-Klečina, Mirjana (ur.).
Zagreb: Hrvatsko društvo za mehaniku (HDM), 2017. str. 49-54 (predavanje, podatak o recenziji nije dostupan, cjeloviti rad (in extenso), znanstveni) -
314.Randić, Miroslav; Pavletić, Duško; Turkalj, Goran, Vidolin, Toni; Šuper, MladenMJERENJE GEOMETRIJSKIH ZNAČAJKI POVRŠINE ZAVARENOG SPOJA // 9. MEĐUNARODNO ZNANSTVENO-STRUČNO SAVJETOVANJE SBZ 2017 „STROJARSKE TEHNOLOGIJE U IZRADI ZAVARENIH KONSTRUKCIJA I PROIZVODA, SBZ 2017.“ Slavonski Brod, 25. - 27.10.2017. / Samardžić, Ivan ; Despotović, Božo (ur.).
Slavonski Brod: Strojarski fakultet u Slavonskom Brodu, Sveučilišta J.J. Strossmayera u Osijeku, 2017. str. 95-105 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
315.Randić, Miroslav; Pavletić, Duško; Turkalj, GoranThe Measurement of Weld Surface Geometry // Maritime Transportation and Harvesting of Sea Resources / C. Guedes Soares, Angelo P. Teixeira (ur.).
London : Delhi: CRC Press ; Taylor & Francis, 2017. str. 655-662 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
316.Valčić, Marko; Prpić-Oršić, JasnaForbidden zone handling in optimal thrust allocation of DP vessels // Maritime Transportation and Harvesting of Sea Resources : Conference Proceedings / Guedes Soares, C., Teixeira, A.P. (ur.).
Chenai: CRC PRESS / BALKEMA, Taylor & Francis Group, London, UK, 2017. str. 1043-1050 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
317.Delač, Boris; Pavković, Branimir; Lenić, KristianAnaliza složenih tehničkih GVIK sustava korištenjem dinamičkog modeliranja // Zbornik radova 15. skup o prirodnom plinu, toplini i vodi / 8. međunarodni skup o prirodnom plinu, toplini i vodi / Raos, Pero ; Galeta, Tomislav ; Kozak, Dražan ; Raos, Marija ; Stojšič, Josip ; Tonković, Zlatko (ur.).
Slavonski Brod: Strojarski fakultet Sveučilišta u Slavonskom Brodu, 2017. str. 12-32 (pozvano predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
318.Stefanović-Marinović, Jelena; Troha, Sanjin; Milovančević, MilošOPTIMAL SELECTION OF A TWO-SPEED TWO-CARRIER PLANETARY TRAIN // IRMES 2017
Trebinje, Bosna i Hercegovina, 2017. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
319.Lerga, Jonatan; Saulig, Nicoletta; Lerga, Rebeka; Štajduhar, IvanTFD Thresholding In Estimating The Number of EEG Components And The Dominant IF Using The Short-Term Rényi Entropy // 10th International Symposium on Image and Signal Processing and Analysis - ISPA 2017 / Kovačič, Stanislav ; Lončarić, Sven ; Kristan, Matej ; Štruc, Vitomir ; Vučić, Mladen (ur.).
Ljubljana: University of Zagreb, Croatia, 2017. str. 80-85 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
320.Anđelić, Nikola; Čanađija, Marko; Car, ZlatanDetermination of Natural Vibrations of Simply Supported Single Layer Graphene Sheet using Non-Local Kirchhoff Plate Theory // Proceedings of International Conference on Innovative Technologies / Pepelnjak Tomaž ; Car Zlatan ; Kudláček Jan (ur.).
Jaromer: Faculty of Engineering, University of Rijeka, 2017. str. 33-36 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
321.Blažević, Sebastijan; Anđelić Nikola; Car, ZlatanResearch of Unstable Behavior of Iterative Path Planning Algorithm for Robot Manipulator // Proceedings of International Conference on Innovative Technologies / Pepelnjak Tomaž ; Car Zlatan ; Kudláček Jan (ur.).
Jaromer: Faculty of Engineering, University of Rijeka, 2017. str. 57-60 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
322.Mrzljak, Vedran; Poljak, IgorIgnition delay in quasi-dimensional numerical model for simulation of diesel engine in cylinder progress // Proceedings of International Conference on Innovative Technologie (IN-TECH 2017) / Pepelnjak, Tomaž ; Car, Zlatan ; Kudláček, Jan (ur.).
Ljubljana: Faculty of Engineering, University of Rijeka, 2017. str. 5-8 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
323.Borić, Andrej; Pepelnjak, Tomaž; Jurkovic, ZoranSingle Point Incremental Forming of Polymers – a review of process parameters // International Conference on Innovative Technologies, IN-TECH 2017 / Pepelnjak, T. ; Car, Z. ; Kudláček, J. (ur.).
Jaromer: Faculty of Engineering, University of Rijeka, 2017. str. 255-258 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
324.Ramakić, Adnan; Sušanj, Diego; Lenac, KristijanGeolocation using Google Vision API // Proceedings of the 10th Annual Baška GNSS Conference
Baška, Hrvatska, 2017. str. 55-66 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
325.Vukelić, Goran; Brčić, Marino; Pastorčić, DarkoExperimental and numerical analysis of a helical spring failure // Proceedings of the XIV International Conference on Computational Plasticity – Fundamentals and Applications / Oñate, E., Owen, D.R.J., Peric, D., Chiumenti, M. (ur.).
Barcelona: International Center for Numerical Methods in Engineering (CIMNE), 2017. str. 545-555 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
326.Jadav, Guruprasad Madhale; Batistić, Luka; Vlahinić, Saša; Vrankić, MiroslavBrain Computer Interface Communicator : A Response to Auditory Stimuli Experiment // MIPRO 2017, 40th International Convention Proceedings / Biljanović, Petar (ur.).
Rijeka: Hrvatska udruga za informacijsku i komunikacijsku tehnologiju, elektroniku i mikroelektroniku - MIPRO, 2017. str. 534-537 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
327.Smoljan, Božo; Iljkić, Dario; Smokvina Hanza, Sunčana; Štic, Lovro; Borić, Andrej; Senčič, Bojan; Vertnik, RobertNumerical model and computer simulation of controlled cooling of hot rolled steel bars // Proceedings of the International Conference MATRIB 2017 (MATERIALS, TRYBOLOGY, RECYCLING)
Vela Luka, Hrvatska, 2017. str. 214-223 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
328.Brščić, Dražen; Francesco, Zanlungo; Kanda, TakayukiModelling of Pedestrian Groups and Application to Group Recognition // 40th International Convention on Information and Communication Technology, Electronics and Microelectronics (MIPRO)
Opatija, 2017. str. 452-457 doi:10.23919/MIPRO.2017.7973489 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
329.Stefanović-Marinović, Jelena; Troha, Sanjin; Milovančević, MilošTHE POSSIBILITIES OF THE TWO-SPEED PLANETARY GEAR TRAINS APPLICATION IN THE TRANSPORT SYSTEMS // TIL 2017
Niš, 2017. str. 151-154 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
330.Stefanović-Marinović, Jelena; Troha, SanjinTWO-CARRIER TWO-SPEED PLANETARY GEAR TRAINS WITH BRAKES ON SINGLE SHAFTS // DEMI 2017
Banja Luka, 2017. str. 469-475 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
331.Lerga, Jonatan; Saulig, Nicoletta; Lerga, Rebeka; Milanović, ŽeljkaEffects of TFD Thresholding On EEG Signal Analysis Based On The Local Rényi Entropy // Proceedings of the 2nd International Multidisciplinary Conference on Computer and Energy Science SpliTech 2017
Split, 2017. str. 1-6 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
332.Grbac Babić, Sanja; Galinac Grbac, Tihana;Network analysis of evolving software-systems // Softcom 2017
Split, Hrvatska, 2017. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
333.Galinac Grbac, Tihana; Runeson, Per; Huljenić, Darko;Unit verification effects on reused components in sequential project releases // 43rd Euromicro Conference on Software Engineering and Advanced Applications
Beč, Austrija, 2017. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
334.Galinac Grbac, Tihana; Domazet, Nikola;On the Applications of Dijakstra's Shortest Path algorithm in Software Defined Networks // IDC 2017: Intelligent Distributed Computing XI, Studies in Computational Intelligence book series (SCI, volume 737)
Beograd, Srbija: Springer, 2017. str. 39-45 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
335.Pita Costa, João; Galinac Grbac, TihanaThe Topological Data Analysis of Time Series Failure Data in Software Evolution // ICPE Companion 2017
New York (NY): ACM, 2017. str. 25-30 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
336.Mrzljak, Vedran; Poljak, Igor; Blažević, SebastijanMonitoring of change in volumes for diesel engine in-cylinder process with quasi-dimensional numerical model // XXV. Internationa scientific conference trans & Motuato ’17 : proceedings / Petar Kolev, Petar (ur.).
Sofija: Scientific technical union of mechanical engineering “Industry-4.0”, 2017. str. 87-90 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
337.Poljak, Igor; Mrzljak, Vedran; Blažević, SebastijanChange of exergy motion in the marine steam plant with main shaft speed variation // XXV International scientific conference trans & motuato ’17 : proceedings / Kolev, Petar (ur.).
Sofija: Scientific technical union of mechanical engineering “Industry-4.0”, 2017. str. 91-94 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
338.Smoljan, Božo; Iljkić, Dario; Štic, Lovro; Smokvina Hanza, Sunčana; Borić, Andrej; Tomašić, NevenNumerical modelling of heat treated welded joint // Proceedings of the 24th IFHTSE Congress 2017 combined with the European Conference on Heat Treatment and Surface Engineering together with A3TS Congress
Nica, Francuska, 2017. str. 13-13 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
339.Smoljan, Božo; Iljkić, Dario; Maretić, Mauro; Smokvina Hanza, Sunčana; Štic, Lovro; Borić, AndrejAn analysis of properties of electroless Ni-P layer on stainless steel // Proceedings of the ESSC & DUPLEX 2017, 9th European Stainless Steel Conference - Science & Market & 5th European Duplex Stainless Steel Conference & Exhibition
Bergamo, Italija, 2017. str. 1-6 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
340.Smoljan, Božo; Iljkić, Dario; Pomenić, Loreta; Smokvina Hanza, Sunčana; Štic, Lovro; Borić, AndrejComputer simulation of steel casting // Proceedings of the 26th International Conference on Metallurgy and Materials - METAL 2017
Brno, Češka Republika, 2017. str. 83-88 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
341.Smoljan, Božo; Iljkić, Dario; Smokvina Hanza, Sunčana; Štic, Lovro; Borić, AndrejComputer simulation of cast steel properties // Proceedings of the 16th INTERNATIONAL FOUNDRYMEN CONFERENCE, Global Foundry Industry – Perspectives for the Future, IFC17
Opatija, Hrvatska, 2017. str. 28-36 (pozvano predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
342.Marohnić, TeaNew insights into estimation of cyclic behaviour of steels based on their monotonic properties using artificial neural networks // Proceedings of the 5th Symposium on Structural Durability in Darmstadt / Vormwald, Michael ; Beier, Heinz Thomas ; Breidenbach, Kerstin (ur.).
Darmstadt: Technische Universitat Darmstadt - Institut fur Stahlbau und Werkstoffmechanik, 2017. str. 223-230 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
343.Pavletić, Duško; Soković, Mirko; Vidolin, ToniLearning outcomes an laboru market needs, Welding engineering case study // The 9th International Working Conference, Total Quality Managment, Advanced and Intelligent Approaches, Proceedings / Prof. dr. VIdosav D. Majstorović (ur.).
Beograd: The University of Belgrade, Mechanical Engineering Faculty, 2017. str. 138-144 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
344.Kostadin, Tihana; Cukor, Goran; Jurković, ZoranMulti-Response Optimization of X20Cr13 Steel Turning Under Vortex Tube Cooling Using Grey Relational Analysis // CIM 2017: Computer Integrated Manufacturing and High Speed Machining / Abele, Eberhard ; Udiljak, Toma ; Ciglar, Damir (ur.).
Zagreb: Hrvatska udruga proizvodnog strojarstva (HUPS), 2017. str. 165-170 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
345.Poljak, Igor; Mrzljak, Vedran; Orović, JosipEnergy flow streams in the marine steam plant during the main propulsion propeller speed variation // International scientific technical conference technics, technologies, education, safety ’17 : proceedings ; Year 1, Issue 1 ; Vol. 2 : Technics and technologies, information technologies, natural and mathematical sciences / Tokarev, Alexander ; Pacek, Boguslaw (ur.).
Sofija: Scientific technical union of mechanical engineering “Industry-4.0”, 2017. str. 131-134 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
346.Brumini, Martina; Kamenar, Ervin; Gljušćić, Petar; Zelenika, Saša; Špalj, StjepanDetermination of efficiency of orthodontic treatment by using engineering tools // Proceedings of the 17th EUSPEN International Conference / Billington, D. ; Phillips, D. (ur.).
Cranfield: EUSPEN, 2017. str. 479-480 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
347.Perčić, Marko; Zelenika, Saša; Kamenar, ErvinIssues in validation of friction in the nanometric domain // Proceedings of the 17th EUSPEN International Conference / Billington, D. ; Phillips, D. (ur.).
Cranfield: EUSPEN, 2017. str. 105-106 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
348.Rodin, Rino; Štajduhar, IvanThe Challenge of Measuring Distance to Obstacles for The Purpose of Generating a 2-D Indoor Map Using an Autonomous Robot Equipped with an Ultrasonic Sensor // Proceedings of MIPRO CTS - Computers in Technical Systems Conference, 2017 / Biljanović, Petar (ur.).
Rijeka: Hrvatska udruga za informacijsku i komunikacijsku tehnologiju, elektroniku i mikroelektroniku - MIPRO, 2017. str. 1212-1217 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
349.Bazina, Tomislav; Jurković, Zoran; Sekulić, MilenkoOptimizacija procesa tokarenja // Proceedings of conference with international participation Application of new technologies and ideas in engineering education / Đokić, Slavko (ur.).
Požega: Tehnička škola, 2017. str. 113-120 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
350.Tomić, Draško; Car, Zlatan; Ogrizović, DarioRunning HPC applications on many million cores Cloud // MIPRO 2017 40th International Convention Proceedings / Skala, Karolj ; Trobec, Roman (ur.).
Opatija: Hrvatska udruga za informacijsku i komunikacijsku tehnologiju, elektroniku i mikroelektroniku - MIPRO, 2017. str. 226-231 doi:10.23919/MIPRO.2017.7973420 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
351.Glažar, Vladimir; Perčić, Marko; Trp, Anica; Lenić, KristianA Comparative Study of Evolutionary Algorithms for Optimization of Fin-and-tube Heat Exchangers // Proceedings of the 9th International Exergy, Energy and Environment Symposium / Nižetić, Sandro ; Šolić, Petar ; Milanović, Željka (ur.).
Split: Fakultet elektrotehnike, strojarstva i brodogradnje Sveučilišta u Splitu, 2017. str. 817-824 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
352.Delač, Boris; Pavković, Branimir; Lenić, KristianObnova zgrada u jadranskoj regiji s naglaskom na potrošnju primarne energije // 5th international congress mechanical Enginners' days / Čarapović, Luka ; Puljić, Denis (ur.).
Zagreb: Hrvatska komora inženjera strojarstva, 2017. str. 99-104 (predavanje, domaća recenzija, cjeloviti rad (in extenso), znanstveni) -
353.Filjar Renato; Sikirica Nenad; Alves Borges, RenatoCitizen Science for GNSS Performance Monitoring and Assessment // Proceedings of 9th Annual Baška GNSS Conference / Kos, Serdjo ; Filjar, Renato (ur.).
Baška: University of Rijeka, Faculty of Maritime Studies Rijeka, Rijeka, Croatia ; The Royal Institute of Navigation, London, UK, 2016. str. 7-18 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
354.Ramakic, Adnan; Lenac, KristijanShort-term people re-identification using image classification // 2016 International Conference on Smart Systems and Technologies (SST)
Osijek, Hrvatska: Institute of Electrical and Electronics Engineers (IEEE), 2016. str. 295-299 doi:10.1109/sst.2016.7765677 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
355.Blecich, Paolo; Petrić, Marko; Franković, BernardRenewable energy in Croatia: a review of present state and future development // Proceedings of the ISES Eurosun 2016 Conference / Martinez, Victor ; Gonzalez, Jose (ur.).
Palma de Mallorca: International Solar Energy Society, 2016. str. 1612-1619 doi:10.18086/eurosun.2016.11.02 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
356.Andrijašević, Andrea; Domitrović, HrvojeEffects of word phonetic contents and speaking style on blind estimation of reverberation time // Alps Adria Acoustics Association Congress on Sound and Vibration, Ljubljana 2016 Conference Proceedings
Ljubljana, Slovenija, 2016. str. 201-208 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
357.Hržić, Franko; Poljančić, Domagoj; Galinac Grbac, TihanaSecure Operations as Congestion Control Mechanism Within OpenStack Based Cloud Laboratory // 2016 International Conference on Smart Systems and Technologies (SST)
Osijek, 2016. str. 129-135 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
358.Senčić, Tomislav; Ljubek, RobertSimulacija procesa u komori izgaranja plinske turbine // Energija i okoliš / Franković, Bernard (ur.).
Rijeka: Hrvatski savez za sunčevu energiju, 2016. str. 605-614 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
359.Brnčić, Dino; Gregov, GoranNumerical simulation of a parallel hydraulic hybrid system for a delivery van // Proceedings 25th of the International Congress "Energy and the Environment
Opatija, Hrvatska, 2016. str. 409-414 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
360.Bilandžija, Zoran; Gregov, GoranNumerička simulacija hidrauličkog sustava za pozicioniranje paraboličnog solarnog kolektora // Proceedings of the 25th International Congress "Energy and the Environment
Opatija, Hrvatska, 2016. str. 247-256 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
361.Neven Bulić, Livio ŠušnjićEDDY CURRENT SENSOR SIMULATION // XXIV Symposium Electromagnetic Phenomena in Nonlinear Circuits
Helsinki, 2016. str. 117-118 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
362.Sušanj, Diego; Gulan, Gordan; Kožar, Ivica; Jeričević, ŽeljkoBone Shape Characterization Using the Fourier Transform and Edge Detection in Digital X-Ray Images // Proceedings of the 39th International Convention on Information and Communication Technology / Biljanović, Petar (ur.).
Rijeka: Hrvatska udruga za informacijsku i komunikacijsku tehnologiju, elektroniku i mikroelektroniku - MIPRO, 2016. str. 380-382 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
363.Mrakovčić, Tomislav; Bukovac, Ozren; Prpić-Oršić, JasnaNumerical simulation of two-stroke low speed turbocharged engine in heavy sea conditions // 22nd Symposium on Theory and Practice of Shipbuilding (In memoriam prof. Leopold Sorta) / Degiuli, Nastia ; Žiha, Kalman ; Flesch, Nenad ; Šoda-Cotić, Stipan ; Kokeza, Vesna (ur.).
Zagreb: Fakultet strojarstva i brodogradnje Sveučilišta u Zagrebu, 2016. (predavanje, domaća recenzija, cjeloviti rad (in extenso), znanstveni) -
364.Prpić-Oršić, Jasna; Mandić, Dino; Benić, Nediljko; Radić, ŽeljkoINVOLUNTARY SPEEED LOSS OF A TANKER IN SEA WAVES // Zbornik radova 22. simpozija Teorija i praksa brodogradnje, in memoriam prof. Leopold Sorta (Sorta 2016) / Degiuli, Nastia (ur.).
Zagreb: Fakultet strojarstva i brodogradnje Sveučilišta u Zagrebu, 2016. str. 73-80 (predavanje, domaća recenzija, cjeloviti rad (in extenso), znanstveni) -
365.Borić, Andrej; Cukor, Goran; Pavletić, DuškoThe Model of Stress Distribution in the Cutting Tool During Turning Process Obtained by SolidWorks // Proceedings of 6th International Conference "Mechanical Technologies and Structural Materials" MTSM 2016 / Jozić, Sonja ; Lela, Branimir (ur.).
Split: Croatian Society for Mechanical Technologies, 2016. str. 11-16 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
366.Čović, Marko; Gradišnik, Vera; Jeričević, ŽeljkoThe investigation of influence of localized states on a-Si:H p-i-n photodiode transient response to blue light impulse with blue light optical bias // Proceedings of the 39th International Convention MIPRO 2016 / Biljanović, Petar (ur.).
Rijeka: Croatian Society MIPRO, 2016., 2016. str. 24-27 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
367.Anđelić, Nikola; Car, Zlatan; Braut, Sanjin; Žigulić, RobertoStudy of influence of geometry, rotational speed and heat generated by wood cutting on vibrations of circular saw blade // International Conference on Innovative Technologies IN-TECH 2016 / Car, Zlatan ; Kudláček, Jan (ur.).
Prag: Tehnički fakultet Sveučilišta u Rijeci, 2016. str. 105-109 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
368.Miletić, Marin; Dragičević, ViktorEnergy potential from municipal solid waste in southeast Europe // Energy an the Environment (2016) / Franković, Bernard (ur.).
Opatija: Hrvatski savez za sunčevu energiju, 2016. str. 75-80 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
369.Stefanović-Marinović, Jelena; Troha, Sanjin; Milovančević, MilošPLANETARY GEAR TRANSMISSIONS POWER LOSSES AS THE CAUSE OF HEATING // 10th international conference ADVANCED MANUFACTURING TECHNOLOGIES
Sozopol, Bugarska, 2016. str. 87-94 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
370.Troha, Sanjin; Karaivanov, Dimitar; Stefanović-Marinović, JelenaINVESTIGATION INTO TWO-SPEED TWO-CARRIER PLANETARY GEARBOXES // 10th international conference ADVANCED MANUFACTURING TECHNOLOGIES
Sozopol, Bugarska, 2016. str. 95-104 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
371.Arnaudov, Kiril; Karaivanov, Dimitar; Troha, SanjinFILLET CURVE OF THE INTERNAL TOOTHING – FEATURES, HAZARDS, SIGNIFICANCE // 5th International Conference on Power Transmission BAPT2016
Ohrid, Sjeverna Makedonija, 2016. str. 15-22 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
372.Kolić, Damir; Storch, Richard Lee; Fafandjel, NikšaLean Transformation of Built-up Panel Assembly in Shipbuilding using a Value Stream Mapping Methodology // SNAME Maritime Convention 2016 Ship Production Symposium / SNAME (ur.).
Bellevue (WA): SNAME, 2016. str. 1-10 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
373.Kirinčić, Mateo; Lenić, Kristian; Trp, AnicaEnergetska i eksergetska analiza cijevnog izmjenjivača topline // Proceedings of the International Congress Energy and the Environment 2016, 25th Scientific Conference on Energy and the Environment / Franković, Bernard (ur.).
Rijeka: Hrvatski savez za sunčevu energiju, 2016. str. 537-546 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
374.Brčić, Marino; Čanađija, Marko; Brnić, JosipInfluence of imperfections on carbon nanotube properties // PROCEEDINGS OF THE 8TH INTERNATIONAL CONFERENCE ON PHYSICAL AND NUMERICAL SIMULATION OF MATERIALS PROCESSING / Zeng, Jianmin ; Sun, Dongke ; Han, Qingyou (ur.).
Seattle (WA): Purdue University Press, 2016. str. 85-85 (pozvano predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
375.Volarić, Ivan; Sučić, ViktorOn the noise impact in the L1 based reconstruction of the sparse time-frequency distributions // Proceedings of the 2016 International Conference on Broadband Communications for Next Generation Networks and Multimedia Applications CoBCom 2016
Graz, Austrija, 2016. str. 1-6 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
376.Miškić-Pletenac, Nino; Lenac, KristijanDistributed real-time lift kinematic monitoring using COTS smartphones // Proceedings of the 39th International Convention on Information and Communication Technology / Biljanović, Petar (ur.). - Rijeka : MIPRO , 2016. 253-256 (ISBN: 978-953-233-087-8).
Opatija, Hrvatska, 2016. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
377.Ćiković, Edi; Mäusl, Kathrin; Lenac, KristijanVirtual Reality Applications with Oculus Rift and 3D Sensors // Augmented Reality, Virtual Reality, and Computer Graphics / De Paolis, Lucio Tommaso ; Mongelli, Antonio (ur.).
Lecce, Italija: Springer, 2016. str. 181-185 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
378.Brnić, Josip; Kršćanski, Sanjin; Brčić, Marino; Niu, JitaiProperties that characterize the material X46Cr13 steel // PROCEEDINGS OF THE 8TH INTERNATIONAL CONFERENCE ON PHYSICAL AND NUMERICAL SIMULATION OF MATERIALS PROCESSING / Zeng, Jianmin ; Sun, Dongke ; Han, Qingyou (ur.).
Seattle (WA): Purdue University Press, 2016. (plenarno, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
379.Čanađija, MarkoA Multiscale Approach to Thermoplasticity // Multiscale modelling of heterogenous structures, MUMO 2016 / Sorić, Jurica ; Allix, O. ; Wriggers, Peter (ur.).
Dubrovnik, Hrvatska, 2016. (pozvano predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
380.Hozdić, Elvis; Jurković, ZoranPerformance Layer of Virtual Autonomous Work Systems // 20th International Research/Expert Conference / Ekinović, S., Yalcin, S., Buj Corral, I. (ur.).
Sredozemno more: Faculty of Mechanical Engineering, Escola Tecnica Superior D'Enginyeria Industrial de Barcelona, Bahçeşehir University Istanbul, 2016. str. 133-136 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
381.Sekulić, Milenko; Pejić, Vlastimir; Gostimirović, Marin; Jurković, ZoranMULTI-RESPONSE OPTIMIZATION OF BALL-END MILLING PARAMETERS USING THE TAGUCHI-BASED GREY RELATIONAL ANALYSIS // 20th International Research/Expert Conference / Ekinović, S., Yalcin, S., Buj Corral, I. (ur.).
Sredozemno more: Faculty of Mechanical Engineering, Escola Tecnica Superior D'Enginyeria Industrial de Barcelona, Bahçeşehir University Istanbul, 2016. str. 49-52 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
382.Janda, Martin; Dlouhy, Tomas; Blecich, Paolo; Franković, BernardComparison of boilers for treated and untreated waste // Energy and the Environment 2016 / Franković, Bernard (ur.).
Rijeka: Hrvatski savez za sunčevu energiju, 2016. str. 59-68 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
383.Vuletić, Stipe; Blecich, Paolo; Franković, BernardTermodinamička analiza pločastog izmjenjivača topline // Energy and the Environment 2016 / Franković, Bernard (ur.).
Rijeka: Hrvatski savez za sunčevu energiju, 2016. str. 425-434 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
384.Terlević, Aris; Blecich, Paolo; Franković, BernardKorištenje infracrvene termografije za poboljšanje energetske učinkovitosti opreme u procesnoj energetskoj industriji // Energy and the Environment 2016 / Franković, Bernard (ur.).
Rijeka: Hrvatski savez za sunčevu energiju, 2016. str. 529-536 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
385.Šoić, Ivan; Blecich, Paolo; Franković, BernardTermodinamička analiza izmjene topline i prijenos tvari u rashladnom tornju // Energy and the Environment 2016 / Franković, Bernard (ur.).
Rijeka: Hrvatski savez za sunčevu energiju, 2016. str. 497-508 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
386.Mrzljak, Vedran; Senčić, Tomislav; Poljak, IgorThermodymanic property analysis of operating substances in diesel engine cylinder process // Energija i okoliš = Energy and Environment ; Čista energija za bolji svijet = Clean energy for a better world : zbornik radova = proceedings / Franković, Bernard (ur.).
Rijeka: Croatian Solar Energy Association, 2016. str. 369-380 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
