Pregled po ustanovi: Tehnički fakultet, Rijeka (MB: 69)

5751.

Lovrin, Neven; Križan, Božidar

The Influence of the Normal Pressure Angle on the Hertzian Stress in HCR Involute Gearing // Sbornik referatu, Časti a mechanismy stroju / Hrudičkova, Milena (ur.).
Ostrava, 2001. str. 173-176 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), ostalo)

5752.

Obsieger, Boris

Optimizacija hidrostatskih ležajeva // Matrib 2002 / Ćurković, Lidija; Grilec, Krešimir (ur.).
Zagreb: Hrvatsko društvo za materijale i tribologiju (HDMT), 2001.

5753.

Franulović, Marina; Obsieger, Boris

The Influence of Keyway Position on Tooth Root Stress of Gear // Mechanical Engineering 2001
Bratislava: Slovak University of Technology Press, 2001.

5754.

Obsieger, Josip; Obsieger, Boris

A Special Cam Profile for Low Speed Radial Piston Hydromotors // Mechanical Engineering 2001
Bratislava: Slovak University of Technology Press, 2001.

5755.

Obsieger, Boris

A Study Of Saint-Venant’s Torsion By The Successive Integration Method // Mechanical Engineering 2001
Bratislava: Slovak University of Technology Press, 2001.

5756.

Obsieger, Josip; Obsieger, Boris

Cam Driven Radial Piston Hydromotors Without Flow Fluctuation // Annals of DAAAM for 2001 & proceedings of the 12th International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Precision Engineering" / Katalinić, Branko (ur.).
Beč: DAAAM International Vienna, 2001. (poster, cjeloviti rad (in extenso), znanstveni)

5757.

Obsieger, Boris

Optimisation of the Plain Hydrostatic Bearing // Annals of DAAAM for 2001 & Proceedings of the 12th International DAAAM Symposium / Katalinić, Branko (ur.).
Beč: DAAAM International Vienna, 2001.

5758.

Obsieger, Boris

Optimisation of Gearboxes for Minimal Friction Losses // RIM 2001 - Revitalization and Modernization of Production / Jurković, Milan; Karabegović, Isak (ur.).
Bihać: Tehnički fakultet Univerziteta u Bihaću, 2001.

5759.

Gruden, Mihael; Prelec, Zmagoslav; Verdnik, Janez; Courcelle, Bertrand

MINI-COGENERATION UNITS FOR DISTRIBUTED POWER AND HEAT SUPPLY // SLOKO - CIGRE / Andrej Otrin (ur.).
Ljubljana: SLOKO CIGRE, 2001. str. 11.9 - 11.15 (predavanje, domaća recenzija, cjeloviti rad (in extenso), znanstveni)

5760.

Siminiati, Dubravka

Kinematical and Dynamical Analysis on the Various Cam Form of Slow Punning Piston Hydraulic Motor // Annals of DAAAM for 2001 & Proceedings / Katalinić, Branko (ur.).
Beč: DAAAM International Vienna, 2001. str. 441-442 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

5761.

Nabergoj, Radoslav; Prpić-Oršić, Jasna

Two dimensional nonlinear dynamic analysis of cable laying operations // Brodogradnja, 49 (2001), 4; 181-189 (međunarodna recenzija, članak, znanstveni)

5762.

Šimunić, Juraj; Randić, Mirko; Živić, Marijana

A Device-Based Process Signal Design of Electric Power Plants // Journal of Computing and Information Technology, 9 (2001), 1; 29-42 (podatak o recenziji nije dostupan, članak, znanstveni)

5763.

Cajner, Franjo; Smoljan, Božo; Landek, Darko

Computer simulaton of induction hardening // Proceedings of 10th Jubilee International Scientific Conference: Achievemnts in Mechanical & Materials Engineering / Dobrazanski, Leszek (ur.).
Gliwice: Faculty of Mechanical Engineering, Silesian University of Techno, 2001. str. 61-64 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

5764.

Dobrinić, Julijan; Čalić, Bruno; Fafandjel, Nikša

Pollution Analysis In Ocean Engineering // Proceedings of Fifth International Symposium and Exhibition on Environmental Contamination in Central and Eastern Europe
Prag, Češka Republika: Florida State University, 2001. str. CD-ROM, 294.PDF (poster, međunarodna recenzija, cjeloviti rad (in extenso), pregledni)

5765.

Franković, Bernard; Vrsalović Ivan

New high profitable wind turbines // Renewable energy, 24 (2001), 3-4; 491-499 (međunarodna recenzija, članak, znanstveni)

5766.

Franković, Bernard; Hrastnik, Branimir

Solar energy demonstration zones in the Dalmatian region // Renewable energy, 24 (2001), 3-4; 501-515 (međunarodna recenzija, članak, znanstveni)

5767.

Dobrinić, Julijan

Onečišćenje mora uljima i elementima u tragovima // Pomorski zbornik, 38 (2001), 333-348 (podatak o recenziji nije dostupan, pregledni rad, ostalo)

5768.

Čarija, Zoran; Mrša, Zoran

Air pollution simulation using genetic algorithm // Proceedings of the 12th International DAAAM Symposium, / Katalinić, Branko (ur.).
Beč: DAAAM International Vienna, 2001. str. 59-60 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

5769.

Turkalj, Goran; Brnić, Josip; Čanađija, Marko

Incremental formulation in finite element stability analysis of thin-walled framed structures // Annals of DAAAM for 2001 & Proceedings of the 12th International DAAAM Symposium / Katalinic, Branko (ur.).
Beč: DAAAM International Vienna, 2001. str. 489-490 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

5770.

Turkalj, Goran; Brnić, Josip; Prpić-Oršić, Jasna

Updated Lagrangian formulation using ESA approach in large rotation problems of thin-walled beam-type structures // Proceedings of the Eighth International Conference on Civil & Structural Engineering Computing / Topping, B. H. V. (ur.).
Stirling: Civil-Comp Press, 2001. str. CD-ROM (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

5771.

Pejčinović, Dalibor

Plastično oblikovanje profila iz trake, 2001., diplomski rad, Tehnički fakultet, Rijeka

5772.

Jurković, Milan; Smoljan, Božo; Jurković, Zoran

Mathematical Modelling and Benefits Analysis of TiN Coated Tools Application // International federation for Heat Treatment and Surface Engineering IFHTSE 2001 / Lišćič, Božidar (ur.).
Zagreb : Dubrovnik: Hrvatsko društvo za toplinsku obradu i inženjerstvo površina, 2001. str. 373-380 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

5773.

Pavletić, Duško; Krulčić, Elvis; Soković, Mirko

Six Sigma Process Improvement // MIT 2001 / Junkar, Mihael; Levy, Paul (ur.).
Ljubljana: Society Machinatores, 2001. str. 191-198 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), stručni)

5774.

Revitalization and Modernization of Production / Jurković, Milan ; Karabegović, Isak (ur.). Bihać: Tehnički fakultet Univerziteta u Bihaću, 2001 (zbornik)

5775.

Cukor, Goran; Jurković, Milan

Contribution to the Stochastic Modelling of Plastic Processing // Metalurgija, 40 (2001), 1; 33-36 (međunarodna recenzija, članak, znanstveni)

5776.

Tufekčić, Džemo; Jurković, Milan; Šelo, Ramiz; Osmanović, Jasmin

Programiranje na CNC mašinama / Tufekčić, Džemo; Jurković, Milan; (ur.).
Tuzla: Univerzitet u Tuzli, 2001

5777.

Jurković, Milan; Karabegović, Edina

Modernizacija domaće metaloprerađivačke industrije primjenom CIM stretegije // Revitalization and Modernization / Jurković, Milan; Karabegović, Isak (ur.).
Bihać: Tehnički fakultet Univerziteta u Bihaću, 2001. str. 513-521

5778.

Damjanović, Ivan; Jurković, Milan; Đukić, Himzo

Modeli za složene procese oblikovanja dijelova od lima // Revitalization and Modernization / Jurković, Milan ; Karabegović, Isak (ur.).
Bihać: Tehnički fakultet Univerziteta u Bihaću, 2001. str. 299-307

5779.

Jurković, Milan; Žapčević, Seid

Arhitektura ekspertnog sistema za planiranje procesa // Zbornik radova - 3. Međunarodni skup Revitalizacija i modernizacija proizvodnje / Jurković, Milan ; Karabegović, Isak (ur.).
Bihać: Tehnički fakultet Univerziteta u Bihaću, 2001. str. 243-250 (poster, cjeloviti rad (in extenso), znanstveni)

5780.

Jurković, Milan; Žapčević, Seid

Technological - Manufacturing Reengineering // Revitalization and Modernization / Jurković, Milan; Karabegović, Isak (ur.).
Bihać: Tehnički fakultet Univerziteta u Bihaću, 2001. str. 235-242

5781.

Jurković, Milan

Tehničko-tehnološke osnove moderne industrijske proizvodnje // Revitalization and Modernization / Jurković, Milan; Karabegović, Isak (ur.).
Bihać: Tehnički fakultet Univerziteta u Bihaću, 2001. str. 25-47

5782.

Jurković, Milan; Tufekčić, Džemo; Barišić, Branimir

Reengineering of Manufacturing Technologies and Processes // Computer Intergrated Manufacturing and High Speed Machining / Cebalo, Roko; Schulz, Herbert (ur.).
Zagreb: Hrvatska udruga proizvodnog strojarstva (HUPS), 2001. str. VI 025 - VI 035

5783.

Jurković, Milan; Leš, Peter; Barišić, Branimir; Jurković, Zoran

The Plastic Forming of Thin Walled Profiles From a Strip // Computer Integrated Manufacturing and High Speed Machining / Cebalo, Roko; Schulz, Herbert (ur.).
Zagreb: Hrvatska udruga proizvodnog strojarstva (HUPS), 2001. str. IV 069 - IV 080

5784.

Jurković, Zoran; Hriešik, Anton; Barišić, Branimir; Gantar, Gašper

Mathematical Modelling and Minimization of the Tool Loading Force of Machining Process // Computer Integrated Manufacturing and High Speed Machining / Cebalo, Roko; Schulz, Herbert (ur.).
Zagreb: Hrvatska udruga proizvodnog strojarstva (HUPS), 2001. str. IV 059 - IV 067

5785.

Buljan, Stipo; Jurković, Milan; Grizelj, Branko

Shaping by Explosive // Computer Integrated Manufacturing and High Speed Machining / Cebalo, Roko; Schulz, Herbert (ur.).
Zagreb: Hrvatska udruga proizvodnog strojarstva (HUPS), 2001. str. IV 021- IV 032

5786.

Šestan, Anton; Hriešik, Andrej; Jurković, Zoran

Identification of the Dynamic Activity of the Pneumatic Hand Grinding Machines System in the Shipyard // Computer Integrated Manufacturing and High Speed Machining / Cebalo, Roko; Schulz, Herbert (ur.).
Zagreb: Hrvatska udruga proizvodnog strojarstva (HUPS), 2001. str. I 155- I 169

5787.

Hriešik, Andrej; Jurković, Zoran

A Contribution to the Investigation of Coated Tools Application for the Forming and the Cutting Process // Computer Integrated Manufacturing and High Speed Machining / Cebalo, Roko; Schulz, Herbert (ur.).
Zagreb: Hrvatska udruga proizvodnog strojarstva (HUPS), 2001. str. I 075- I 083

5788.

Jurković, Milan; Mikac, Tonči; Jurković, Zoran

Reengineering of Manufacturing Processes and Systems // Business Systems Management UPS 2001 / Majstorović, Vlado; Katalinić, Branko (ur.).
Mostar : Beč: DAAAM International Vienna, 2001. str. 097-100 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

5789.

Mikac, Tonči

Alternative solutions in manufacturing systems planning activities // Mechanical Engineering 2001 - Proceedings of Presented Papers / Varchola, M (ur.).
Bratislava: Faculty of Mechanical Engineering Slovak University of Technolog, 2001. str. 384-389 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

5790.

Mikac, Tonči

Computer aid for production systems designing // Proceedings of 3rd International Congress Mechanical Engineering Technologies '01 / Mihovski, M (ur.).
Sofija: Scientific-Technical Union of Mechanical Engineering, 2001. str. 502-505 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

5791.

Perinić, Mladen; Mikac, Tonči; Ljubetić, Juraj

Applying genetic alghorithm in process plan selection // Annals of DAAAM for 2001 & Proceedings of the 12th International DAAAM Symposium / Katalinic, Branko (ur.).
Beč: DAAAM International Vienna, 2001. str. 357-358

5792.

Mikac, Tonči

Evaluation of conceptual solutions of the complex manufacturing systems // RIM 2001 - Revitalization and modernization of production / Jurković, M. ; Karabegović, I. (ur.).
Bihać: Grafičar, Bihać, 2001. str. 483-492

5793.

Dejhalla, Roko; Vuković, Senka; Mrša, Zoran

Numerical Optimization of the Ship Hull from a Hydrodynamic Standpoint // Brodogradnja, 49 (2001), 3; 289-294 (međunarodna recenzija, članak, znanstveni)

5794.

Nabergoj, Radoslav; Prpić-Oršić, Jasna

Design Methodology for Predicting Marine Cable Dynamics during Laying Operations at Sea // Poceeedings of 3th International Conference on Marine Industry - MARIND'2001 / Bogdanov, Peter A. (ur.).
Varna: MARIND, 2001. str. 119-126 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), ostalo)

5795.

Marunić; Gordana

Maximum Stress Position of Non-Uniformly Loaded Spur Tooth // MicroCAD 2001 International Scientific Conference / Patko, Gyla (ur.).
Miskolc: Miskolci Egyetem es Technlogia Tranzfer Centrum, 2001. str. 19-23 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

5796.

Kuljanić, Elso; Cukor, Goran

Machinability Testing and Optimization of Machining Processes // CIM 2001 Computer Integrated Manufacturing and High Speed Machining / 7th International Scientific Conference on Production Engineering / Cebalo, Roko ; Schulz, Herbert (ur.).
Zagreb: Hrvatska udruga proizvodnog strojarstva (HUPS), 2001. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

5797.

Mrša, Josipa; Smoljan, Božo

The ABC accumulation model of Quality costs // Proceedings of the International Conference on Advanced Materials Processing Technologies "New Developments on Modelling and Manufacturing Process Control" : AMPT'01 / Torralba, Jose M. (ur.).
Madrid: Universidad Carlos III de Madrid, 2001. str. 1093-1100 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

5798.

Smoljan, Božo

Computer Simulation of Austenite Decomposition // Proceedings of the International Conference on Advanced Materials Processing Technologies "Developments on Modelling and Manufacturing Process Control" : AMPT'01 / Torralba, Jose M. (ur.).
Madrid: Universidad Carlos III de Madrid, 2001. str. 1019-1024 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

5799.

Pažur, Ivana

Vorstellung des kroatischen Wissenschaftsinformationssystems (SZI-RH)im World Wide Web Kategorien: Biomedizin, Naturwissenschaft und Technik // B.I.T Online: Zeitschrift fuer Bibliothek, Information und Technologie, 4 (2001), 3; 267-270 (podatak o recenziji nije dostupan, članak, stručni)

5800.

Marunić, Gordana

Deformation of a Solid Gear Tooth Foundation // RIM 2001-Revitalization and Modernization of Production / Jurković, Milan, Karabegović, Isak (ur.).
Bihać: Tehnički fakultet Univerziteta u Bihaću, 2001. str. 147-152