Pregled po ustanovi: Tehnički fakultet, Rijeka (MB: 69)

5501.

Mikac, Tonči; Perinić, Mladen; Ljubetić, Juraj

Applying genetic algorithms in activities of the cell formation // Annals & Proceedings of the 14th DAAAM International Symposium / Katalinić, Branko (ur.).
Beč: DAAAM International Vienna, 2003. str. 297-298 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

5502.

Mikac, Tonči; Perinić, Mladen

Genetic algorithm application for cell formation problem // CADAM 2003 : book of abstracts / 1st International Conference on Computer Aided Design and Manufacturing, Šibenik, Croatia, September 30th - October 3rd 2003 / Obsieger, Boris (ur.).
Ičići: Revelin, 2003. (predavanje, međunarodna recenzija, sažetak, znanstveni)

5503.

Brnić, Josip; Turkalj, Goran; Čanađija, Marko

Optimal design of dump truck body based on finite element method // Motauto '03 Proceedings, Volume II, Automobile technics and transport / Traykov, Borislav (ur.).
Sofija: Scientific-technical union of mechanical engineering of Bulgaria, 2003. str. 6-8 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

5504.

Čanađija, Marko; Brnić, Josip

Finite plastic strains within nonisothermal context // Proceedings of the 4th International Congress of Croatian Society of Mechanics / Matejiček, Franjo (ur.).
Zagreb: Hrvatsko društvo za mehaniku (HDM), 2003. str. 97-205 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

5505.

Čanađija, Marko; Brnić, Josip

A contribution to optimisation in thermomechanics: shape and layout problems // DAAAM International Scientific Book / Katalinić, Branko (ur.).
Beč: DAAAM International Vienna, 2003. str. 103-112

5506.

Brnić, Josip; Turkalj, Goran; Čanađija, Marko; Roščić, Sandra

Pressure vessel optimal design based on viscoplastic material response // Proceedings of the Workshop: Optimal Design / Zarka, Joseph (ur.).
Palaiseau: Laboratoire de Mecanique des Solides, Ecole Polytechnique, 2003. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

5507.

Brnić, Josip; Turkalj, Goran; Čanađija, Marko; Lanc, Domagoj

Shape and layout optimisation of plate girders // Annals of DAAAM for 2003 & Proceedings of the 14th International DAAAM Symposium Intelligent Manufacturing & Automation: Focus on Reconstruction and Development / Katalinic, Branko (ur.).
Beč: DAAAM International Vienna, 2003. str. 067-068 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

5508.

Turkalj, Goran; Brnić, Josip; Lanc, Domagoj

Large displacement formulation for elastic-plastic space frames // Proceedings of the 4th International Congress of Croatian Society of Mechanics / Matajiček, Franjo (ur.).
Zagreb: Hrvatsko društvo za mehaniku (HDM), 2003. str. 317-324 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

5509.

Brnić, Josip; Turkalj, Goran; Čanađija, Marko

Application of finite element structural optimization in naval architecture // Buletinul ştiinţific al Universităţii "Politehnica" din Timişoara. Seria matematică-fizică, (2003), 353-365 (podatak o recenziji nije dostupan, članak, znanstveni)

5510.

Turkalj, Goran; Brnić, Josip; Lanc, Domagoj

Elastic-plastic large displacement analysis of thin-walled beam type structures // System-based Vision for Strategic and Creative Design, Vol. 1 / Bontempi, Franco (ur.).
Lisse: A.A. Balkema Publishers ; Swets & Zeitlinger, 2003. str. 6-6

5511.

Jurković, Zoran; Kuzman, Karl; Cosma, Dan-Sorin

Mathematical Modeling and Numerical Simulation of the Tool Loading at Deep Drawing Process // Modern Technologies in Manufacturing / Gyenge, C. (ur.).
Cluj - Napoca: Faculty of Machine Building, Technical University of Cluj-Napoca, 2003. str. 263-266 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

5512.

Karabegović, Isak; Jurković, Milan; Rošić, Husein

A experimental researching and modelling of tool at the boring process // Research and Development in Mechanical Industry / Dašić, P. (ur.).
Herceg Novi, 2003. str. 252-256 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

5513.

Karabegović, Isak; Jurković, Milan; Mahmić, Mehmed

The Experimental Examination of Material Processing Measuring Tool Existing // Research and Development in Mechanical Industry / Dašić, P. (ur.).
Herceg Novi, 2003. str. 247-251 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

5514.

Dobraš, Branka; Gudac, Goran; Šimunić, Juraj

Modeliranje elektroenergetskih postrojenja prema IEC normama, 2003. (podatak o recenziji nije dostupan, elaborat/studija).

5515.

Jurković, Milan; Karabegović, Isak

Napredne tehnologije za zemlje u tranziciji // Development and Modernization of Production / Karabegović, Isak ; Jurković, Milan ; Doleček, Vlatko (ur.).
Bihać: Univerzitet u Bihaću ; International Biographical Centre Cambridge, 2003. str. 23-38 (pozvano predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

5516.

Jurković, Milan; Vojić, Samir

Reinženjering poslovnih procesa // Development and Modernization of Production / Karabegović, Isak ; Jurković, Milan ; Doleček, Vlatko (ur.).
Bihać: Univerzitet u Bihaću ; International Biographical Centre Cambridge, 2003. str. 837-844 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

5517.

Žapčević, Seid; Jurković, Milan

Pogonom orijentirano programiranje CNC alatnih mašina // Development and Modernization of Production / Karabegović, Isak ; Jurković, Milan ; Doleček, Vlatko (ur.).
Bihać: Univerzitet u Bihaću ; International Biographical Centre Cambridge, 2003. str. 155-160 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

5518.

Karabegović, Edina; Jurković, Milan

Nova proizvodna filozofija i reinženjering u sistemu CIM // Development and Modernization of Production / Karabegović, Isak ; Jurković, Milan ; Doleček, Vlatko (ur.).
Bihać: Univerzitet u Bihaću ; International Biographical Centre Cambridge, 2003. str. 409-414 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

5519.

Jurković, Milan; Rošić, Husein

Integracija CAD u sistem CIM // Development and Modernization of Production / Karabegović, Isak ; Jurković, Milan ; Doleček, Vlatko (ur.).
Bihać: Univerzitet u Bihaću ; International Biographical Centre Cambridge, 2003. str. 309-314 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

5520.

Buljan, Stipo; Jurković, Milan; Grizelj, Branko

Explosion-Based Welding // Development and Modernization of Production / Karabegović, Isak ; Jurković, Milan ; Doleček, Vlatko (ur.).
Bihać: Univerzitet u Bihaću ; International Biographical Centre Cambridge, 2003. str. 201-206 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

5521.

Jurković, Milan; Jurković, Zoran; Karabegović, Edina; Comsa, Dan-Sorin

The Choice of the Optimal Machining Procedure by Modelling and Simulation Application // Development and Modernization of Production / Karabegović, Isak ; Jurković, Milan ; Doleček, Vlatko (ur.).
Bihać: Univerzitet u Bihaću ; International Biographical Centre Cambridge, 2003. str. 235-240 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

5522.

Jurković, Milan; Jurković, Zoran; Karabegović, Edina

Modelling of Metal Formability in Forming Processes (Forming Limit Curves-FLC) // Trends in the Development of Machinery and Associated Technology, TMT 2003 / Calvet, Joan Vivancos ; Sales, Ferran Puerta ; Ekinović, Sabahudin ; Brdarević, Safet (ur.).
Zenica : Barcelona: Faculty of Mechanical Engineering in Zenica ; Escola Tecnica Superior D Enginyeria Industrial de Barcelona, 2003. str. 165-168 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

5523.

Jurković, Zoran; Jurković, Milan

Modeling and Simulation of the Cutting Force Using Experimental Data // Trends in the Development of Machinery and Associated Technology, TMT 2003 / Calvet, Joan Vivancos ; Sales, Ferran Puerta ; Ekinović, Sabahudin ; Brdarević, Safet (ur.).
Zenica : Barcelona: Faculty of Mechanical Engineering in Zenica ; Escola Tecnica Superior D Enginyeria Industrial de Barcelona, 2003. str. 81-84 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

5524.

Barišić, Branimir; Jurković, Milan; Kostan, Ivan

Numerical-experimental analysis of deep drawing process on Al99.5F7 // Trends in the Development of Machinery and Associated Technology, TMT 2003 / Calvet, Joan Vivancos ; Sales, Ferran Puerta ; Ekinović, Sabahudin ; Brdarević, Safet (ur.).
Zenica : Barcelona: Faculty of Mechanical Engineering in Zenica ; Escola Tecnica Superior D Enginyeria Industrial de Barcelona, 2003. str. 137-140 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

5525.

Jurković, Zoran; Jurković, Milan

Modelling and Simulation Application by the Optimization of Deep Drawing Process // Journal for technology of plasticity, 28 (2003), 1-2; 121-134 (podatak o recenziji nije dostupan, članak, znanstveni)

5526.

Razvoj i modernizacija proizvodnje / Karabegovic, Isak ; Jurković, Milan ; Dolecek, Vlatko (ur.). Bihać: Univerzitet u Bihaću ; International Biographical Centre Cambridge, 2003 (zbornik)

5527.

Marunić, Gordana

Stress Variation at Loaded Teeth Bottoms of Thin-Rimmed Gear // CADAM 2003 : selected papers / 1st International Conference on Computer Aided Design and Manufacturing / Obsieger, Boris (ur.).
Ičići: Revelin ; Zigo, 2003. str. 49-55

5528.

Troha, Sanjin; Marunić, Gordana

Cylindrical and Bevel Gear Geometrical Model // 9. znanstveno-stručni kolokvij
Crikvenica: Hrvatsko društvo za konstruktivnu geometriju i kompjutorsku grafiku, 2003. (predavanje, sažetak, stručni)

5529.

Dobraš, Branka; Gudac, Goran; Šimunić, Juraj

Managing interoperability problems in power system using information modeling // Proceedings of the 14th International DAAAM Symposium / Katalinic, Branko (ur.).
Beč: DAAAM International Vienna, 2003. str. 121-122 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

5530.

Družeta, Siniša; Črnjarić-Žic, Nelida; Kranjčević, Lado

Influence of the Outflow Boundary Conditions in the Open Channel and Shallow Water Models // Proceedings of 4th International Congress of Croatian Society of Mechanics / Matejiček, Franjo (ur.).
Zagreb: Hrvatsko društvo za mehaniku (HDM), 2003. str. 137-144 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

5531.

Sopta, Luka; Vuković, Senka; Škifić, Jerko

Well ballanced Q-scheme for nozzle flow equations // Proceedings of 4th International Congress of Croatian Society of Mechanics / Matejiček, Franjo (ur.).
Bizovac: Grafika Osijek, 2003. str. 509-516 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

5532.

Sopta, Luka; Kranjčević, Lado; Vuković, Senka

Comparison of some implicit and explicit schemes for open channel flow equations // Proceedings of 4th International Congress of Croatian Society of Mechanics / Matejiček, Franjo (ur.).
Bizovac: Grafika Osijek, 2003. str. 275-282 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

5533.

Sopta, Luka; Črnjarić-Žic, Nelida; Vuković, Senka

On numerical treatment of shallow water flow over the dry bed including balancing // Proceedings of 4th International Congress of Croatian Society of Mechanics / Matejiček, Franjo (ur.).
Bizovac: Grafika Osijek, 2003. str. 77-84 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

5534.

Troha, Sanjin; Marunić, Gordana

3D geometrijsko modeliranje zupčastog reduktora // International Scientific Conference on Production Engineering (RIM 2003) : proceedings / Karabegović, Isak ; Jurković, Milan ; Dolenček, Vlatko (ur.).
Bihać: Faculty of Technical Engineering, 2003. str. 55-60 (poster, cjeloviti rad (in extenso), stručni)

5535.

Marunić, Gordana

Changes of Spur Tooth Stress with Change of Meshing Phase // 4th International Scientific Conference on Production Engineering (RIM 2003) : proceedings / Karabegović, Isak ; Jurković, Milan ; Doleček, Vlatko (ur.).
Bihać: University of Bihać Faculty of Technical Engineering Bihać ; International Biographical Centre Cambridge, 2003. str. 61-66 (poster, sažetak, znanstveni)

5536.

Marunić, Gordana

Spur Tooth-root Maximum Stress of Meshing Phase // Proceeding of the 7th International Research/Expert Conference Trends in the Development of Machinery and Associated Technology (TMT 2003) / Vivancos, Juan ; Puerta, Feran ; Ekinović, Sabahudin ; Brdarević, Safet (ur.).
Lloret de Mar: Faculty of Mechanical Engineering in Zenica, Escola Technica Superior D´Enginyeria de Barcelona, Universitat Politecnica de Catalunya, 2003. str. 633-636 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

5537.

Cukor, Goran; Stoić, Antun

Solving the Face Milling Optimisation Problem by Evolutionary Algorithm // 7th International Research/Expert Conference "Trends in the Development of Machinery and Associated Technology" TMT 2003 / Joan Vivancos, Calvet ; Ferran Puerta, Sales ; Sabahudin, Ekinović ; Safet, Brdarević (ur.).
Barcelona: Faculty of ME in Zenica, Escola Technica Superior D'Enginyeria Industrial de Barcelona, Mechanic, Universitet Politecnica de Catalunya, 2003. str. 29-32 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

5538.

Stojković, Nino; Jurišić, Dražen; Mijat, Neven

Real Amplifier Influence on Impedance Tapered 2nd-Order Filters // Proceedings of the Region 8-IEEE International Conference on Computer as a Tool (EUROCON 2003). Vol. 1 / Zajc, Baldomir ; Tkalčić, Marko (ur.).
Ljubljana: IEEE Region 8, Slovenia Section, 2003. str. 110-113 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

5539.

Tomić, Mladen; Stojković, Nino; Kovač, Mario

Implementation and Analysis of MPEG-4 Dynamic Resolution Conversion // Proceedings of the 3rd International Symposium on Image and Signal Processing and Analysis / S. Lončarić, A. Neri, H. Babić (ur.).
Rim, 2003. str. 317-322 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

5540.

Stoić, Antun; Cukor, Goran

Optimisation Method for Laser Beam Cutting // DAAAM International Scientific Book 2003 / Katalinić, Branko (ur.).
Beč: DAAAM International Vienna, 2003. str. 569-582 ; uk. 646

5541.

Modun, Darko

Zaštitni učinak katehina na ishemijsko-reperfuzijsko oštećenje miokarda izoliranoga štakorskog srca, 2003., magistarski rad, Medicinski fakultet, Split

5542.

Vuković, Senka; Sopta, Luka

High-Order ENO and WENO Schemes with Flux Gradient and Source Term Balancing // Applied Mathematics and Scientific Computing / Drmač, Zlatko ; Hari, Vjeran ; Sopta, Luka ; Tutek, Zvonimir ; Veselić, Krešimir (ur.).
New York (NY): Kluwer Academic Publishers, 2003.

5543.

Sopta, Luka; Črnjaric-Zic, Nelida; Vuković, Senka

Numerical Approximations of the Sediment Transport Equations // Applied Mathematics and Scientific Computing / Drmač, Zlatko ; Hari, Vjeran ; Sopta, Luka ; Tutek, Zvonimir ; Veselić, Krešimir (ur.).
New York (NY): Kluwer Academic Publishers, 2003.

5544.

Vuković, Senka; Sopta, Luka

Upwind Schemes with Exact Conservation Property for One-Dimensional Open Channel Flow Equations // SIAM Journal on Scientific Computing, 24 (2003), 5; 1630-1649 (međunarodna recenzija, članak, znanstveni)

epubs.siam.org

5545.

Katrašnik, Tomaž; Rodman, Samuel; Trenc, Ferdinand; Medica, Vladimir

Improvement of the Dynamic Characterisric of an Automotive Engine by a Turbocharger Assisted by an Electric Motor // Journal of engineering for gas turbines and power, 125 (2003), SI 2; 590-595 (međunarodna recenzija, članak, znanstveni)

5546.

Katrašnik, Tomaž; Trenc, Ferdinand; Medica, Vladimir; Rodman-Oprešnik, Samuel; Bizjan, Frančišek

ANALIZA VPLIVA ELEKTRIČNIH PODPORNIH NAPRAV NA IZBOLJŠANJE DINAMIČNE KARAKTERISTIKE TLAČNO POLNJENEGA DIZELSKEGA MOTORJA // Innovatve Automotive Technology IAT'03 / Fajdiga, Matija ; Klemenc, Jernej ; Kostanjevec, Andrej ; Trenc, Ferdinand (ur.).
Ljubljana: ZSIT Slovenije - LAVEK, 2003. str. 127-135 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), pregledni)

5547.

Marunić, Gordana

Maximum Fillet Stress of Thin-Rimmed Gear During One Engagement Cycle // DAAAM International Scientific Book 2003 / Katalinić, Branko (ur.).
Beč: DAAAM International Vienna, 2003.

5548.

Pavković, Branimir; Medica, Vladimir

A Dynamic Numerical Model of a Shell and Tube Refrigerant Condenser // DAAAM International Scientific Book 2003 / Katalinić, Branko (ur.).
Beč: DAAAM International Vienna, 2003.

Pristup cjelovitom tekstu rada

5549.

Vrankić, Miroslav; Seršić, Damir; Štajduhar, Ivan

Lossy Image Reconstruction Using Adaptive Wavelet Filter Bank // Proceedings of the Fifth IASTED International Conference on Signal and Image Processing / Hamza, M. H. (ur.).
Anaheim : Calgary : Zurich: ACTA Press, 2003. str. 245-248 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

5550.

Vlahinić, Saša

La misura della distorsione armonica e le metodologie d'identificazione delle sorgenti di disturbo nella determinazione della qualita' dell'energia elettrica, 2003., doktorska disertacija, Facolta' di Ingegneria, Trst