Pregled po ustanovi: Fakultet strojarstva i brodogradnje, Zagreb (MB: 120)

709.

Rutz, Dominik; Worm, Jakob; Doczekal, Christian; Kazagić, Anes; Duić, Neven; Markovska, Nataša; Batas Bjelić, Ilija; Sunko, Rok; Trešnjo, Dino; Merzić, Ajla et al.

Transition Towards a Sustainable Heating and Cooling Sector - Case Study of Southeast European Countries // Thermal science, 23 (2019), 6A; 3293-3306 doi:10.2298/TSCI190107269R (međunarodna recenzija, članak, znanstveni)

doi thermalscience.vinca.rs

710.

Pająk, Michał; Lisjak, Dragutin; Kolar, Davor

IDENTIFICATION OF INABILITY STATES OF ROTATING SUBSYSTEMS OF VEHICLES AND MACHINES // Journal of KONES, 26 (2019), 1; 111-118 doi:10.2478/kones-2019-0014 (međunarodna recenzija, članak, znanstveni)

doi

711.

Kolar, Davor; Lisjak, Dragutin; Pająk, Michał

ROTATING SHAFT FAULT PREDICTION USING CONVOLUTIONAL NEURAL NETWORK: A PRELIMINARY STUDY // Journals of KONES, 26 (2019), 3; 75-81 doi:10.2478/kones-2019-0060 (međunarodna recenzija, članak, znanstveni)

doi

712.

Šercer, Mladen; Rezić, Tonči; Godec, Damir; Oros, Damir; Pilipović, Ana; Ivušić, Franjo; Rezić, Iva; Andlar, Martina; Ludwig, Roland; Šantek, Božidar

Microreactor Production by PolyJet Matrix 3D- Printing Technology: Hydrodynamic Characterization // Food technology and biotechnology, 57 (2019), 2; 272-281 doi:10.17113/ftb.57.02.19.5725 (međunarodna recenzija, članak, znanstveni)

doi hrcak.srce.hr

713.

Miler, Daniel; Škec, Stanko; Katana, Branko; Žeželj, Dragan

An experimental study of composite plain bearings: Influence of clearance on friction coefficient and temperature // Strojniški vestnik, 65 (2019), 10; 547-556 doi:10.5545/sv-jme.2019.6108 (međunarodna recenzija, članak, znanstveni)

doi

714.

Cash, Philip; Škec, Stanko; Štorga, Mario

The Dynamics of Design: Exploring Heterogeneity in Meso-scale Team Processes // Design studies, 64 (2019), 124-153 doi:10.1016/j.destud.2019.08.001 (međunarodna recenzija, članak, znanstveni)

doi

715.

Parraguez, Pedro; Piccolo, Sebastiano A.; Perišić, Marija Majda; Štorga, Mario; Maier, Anja M.

Process Modularity Over Time: Modeling Process Execution as an Evolving Activity Network // IEEE Transactions on Engineering Management, 67 (2019), -; 1-13 doi:10.1109/tem.2019.2935932 (međunarodna recenzija, članak, znanstveni)

doi

716.

Li, Knagping; Liu, Liming; Wang, Fei; Wang, Tieqiang; Duić, Neven; Shafe-khah, Miadreza; P.S. Catalao, Joao

Impact factors analysis on the probability characterized effects of time of use demand response tariffs using association rule mining method // Energy conversion and management, 197 (2019) doi:10.1016/j.enconman.2019.111891 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

717.

Zhen; Zhao, Xuan; Zhiming, Wang; Fei, Sun; Rongfu; Duić, Neven; Jin; Tao

Image phase shift invariance based multi- transform-fusion method for cloud motion displacement calculation using sky images // Energy conversion and management, 197 (2019), 111853, 14 doi:10.1016/j.enconman.2019.111853 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com doi.org

718.

Li, Kangping; Wang, Fei; Mi, Zengqiang; Fotuhi- Firuzabad, Mahmoud; Duić, Neven; Wang, Tieqiang

Capacity and output power estimation approach of individual behind-the-meter distributed photovoltaic system for demand response baseline estimation // Applied energy, 253 (2019), 113595, 12 doi:10.1016/j.apenergy.2019.113595 (međunarodna recenzija, članak, znanstveni)

doi

719.

Aboelkassem, Yasser; Virag, Zdravko

A hybrid Windkessel-Womersley model for blood flow in arteries // Journal of theoretical biology, 2019 (2019), 462; 499-513 doi:10.1016/j.jtbi.2018.12.005 (međunarodna recenzija, članak, znanstveni)

doi

720.

Ćatipović, Ivan; Ćorak, Maro; Alujević, Neven; Parunov, Joško

Dynamic analysis of an array of connected floating breakwaters // Journal of marine science and engineering, 7 (2019), 9; 298, 14 doi:10.3390/jmse7090298 (međunarodna recenzija, članak, znanstveni)

doi

721.

Gudlin, Mihael; Hegedić, Miro; Cajner, Hrvoje; Štefanić, Nedeljko

Solving Problems of Interruptions and Multitasking in the Pharmacy of a Large Hospital Centre // Transactions of FAMENA, 43 (2019), 2; 1-18 doi:10.21278/tof.43201 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada doi

722.

Filipović, Petar; Dović, Damir; Ranilović, Borjan; Horvat, Ivan

Numerical and experimental approach for evaluation of thermal performances of a polymer solar collector // Renewable and Sustainable Energy Reviews, 112 (2019), 127-139 doi:10.1016/j.rser.2019.05.023 (međunarodna recenzija, članak, znanstveni)

doi

723.

Mikulčić, Hrvoje; Ridjan Skov, Iva; Dominković, Dominik Franjo; Wan Alwi, Sharifah Rafidah; Manan, Zainuddin Abdul; Tan, Raymond; Duić, Neven; Mohamad, Siti Nur Hidayah; Wang, Xuebin

Flexible Carbon Capture and Utilization technologies in future energy systems and the utilization pathways of captured CO2 // Renewable & sustainable energy reviews, 114 (2019), 109338, 20 doi:10.1016/j.rser.2019.109338 (međunarodna recenzija, pregledni rad, znanstveni)

doi www.sciencedirect.com

724.

Wang, Xuebin; Ma, Daoyang; Jin, Qiming; Deng, Shuanghui; Stančin, Hrvoje; Tan, Houzhang; Mikulčić, Hrvoje

Synergistic effects of biomass and polyurethane co-pyrolysis on the yield, reactivity, and heating value of biochar at high temperatures // Fuel processing technology, 194 (2019), 106127, 11 doi:10.1016/j.fuproc.2019.106127 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

725.

Mikulčić, Hrvoje; Cerinski, Damijan; Baleta, Jakov; Wang, Xuebin

Improving Pulverized Coal and Biomass Co- Combustion in a Cement Rotary Kiln by Computational Fluid Dynamics // Chemical engineering & technology, 42 (2019), 12; 2539-2545 doi:10.1002/ceat.201900086 (međunarodna recenzija, članak, znanstveni)

doi

726.

Zakula, Tea; Bagaric, Marina; Ferdelji, Nenad; Milovanovic, Bojan; Mudrinic, Sasa; Ritosa, Katia

Comparison of dynamic simulations and the ISO 52016 standard for the assessment of building energy performance // Applied energy, 254 (2019), 113553; 1-17 doi:.org/10.1016/j.apenergy.2019.113553 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

727.

Garašić, Ivica; Jurica, Maja; Iljkić, Dario; Barišić, Ante

Determination of ballistic properties on ARMOX 500T steel welded joint // Engineering review (Technical Faculty University of Rijeka), 39 (2019), 2; 186-196 doi:http://.org/10.30765/er.39.2.8 (međunarodna recenzija, članak, znanstveni)

doi 161.53.40.220

728.

Bedoić, Robert; Ocelić Bulatović, Vesna; Čuček, Lidija; Ćosić, Boris; Špehar, Ana; Pukšec, Tomislav; Duić, Neven

A kinetic study of roadside grass pyrolysis and digestate from anaerobic mono-digestion // Bioresource technology, 292 (2019), 121935, 9 doi:10.1016/j.biortech.2019.121935 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

729.

Senjanović, Ivo; Alujević, Neven; Ćatipović, Ivan; Čakmak, Damjan; Vladimir, Nikola; Lozina, Željan

Some dilemmas in energy approach to vibration and stability analysis of pressurized and rotating toroidal shells // International journal for engineering modelling, 32 (2019), 1; 59-76 doi:10.31534/engmod.2019.1.ri.01f (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada doi hrcak.srce.hr

730.

Kozmar, Hrvoje; Allori, Davide; Bartoli, Gianni; Borri, Claudio

Wind characteristics in the wake of a non-rotating wind turbine close to a hill // Transactions of FAMENA, 43 (2019), 3; 13-36 (međunarodna recenzija, članak, znanstveni)

731.

Katinić, Marko; Kozak, Dražan; Božić, Željko; Gelo, Ivan

Plastic limit pressures for cracked tube containing twin collinear axial through-wall cracks // Archive of applied mechanics, 89 (2019), 5; 805-811 doi:10.1007/s00419-018-1395-5 (međunarodna recenzija, članak, znanstveni)

doi link.springer.com

732.

Horvat, Nino; Virag, Lana; Holzapfel, Gerhard A.; Sorić, Jurica; Karšaj, Igor

A finite element implementation of a growth and remodeling model for soft biological tissues: Verification and application to abdominal aortic aneurysms // Computer methods in applied mechanics and engineering, 352 (2019), 586-605 doi:10.1016/j.cma.2019.04.041 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

733.

Stojanović, Ivan; Farkas, Andrea; Alar, Vesna; Degiuli, Nastia

Evaluation of corrosion protection of two underwater coating systems in simulated marine environment // Jom-journal of the minerals metals & materials society, 71 (2019), 4330-4338 doi:10.1007/s11837-019-03669-4 (međunarodna recenzija, članak, znanstveni)

doi link.springer.com

734.

Ćatipović, Ivan; Hadžić, Neven; Dias, Frederic; Kozmar, Hrvoje

Computational model of simultaneous wave and sea current loads on tidal turbines // Ocean engineering, 184 (2019), 323-331 (međunarodna recenzija, članak, znanstveni)

735.

Kurtela, Marin; Šimunović, Vinko; Stojanović, Ivan; Alar, Vesna

Effect of the Cerium (III) Chloride Heptahydrate on the Corrosion Inhibition of Aluminium Alloy // Materials And Corrosion, 71 (2019), 125-147 doi:10.1002/maco.201911057 (međunarodna recenzija, članak, znanstveni)

doi doi.org

736.

Farkas, Andrea; Degiuli, Nastia; Martić, Ivana

Assessment of offshore wave energy potential in the Croatian part of the Adriatic Sea and comparison with wind energy potential // Energies, 12 (2019), 12; 2357, 20 doi:10.3390/en12122357 (međunarodna recenzija, članak, znanstveni)

doi www.mdpi.com

737.

Živić, Marija; Galović, Antun; Avsec, Jurij; Barac, Antun

Application of Gas Condensing Boilers in Domestic Heating // Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 26 (2019), 3; 681-685 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada

738.

Juranić, Jasmin; Pavković, Neven; Naumann, Thomas; Toepfer, Ferdinand

Patterns of engineering design collaboration and reasoning activities modelled with Coloured Petri Nets // Journal of engineering design, 30 (2019), 10-12; 563-598 doi:10.1080/09544828.2019.1630803 (međunarodna recenzija, članak, znanstveni)

doi www.tandfonline.com

739.

Jurak, Mladen; Radišić, Ivana; Žgaljić Keko, Ana

Two-phase Two-component Flow in Porous Media in Low Solubility Regime // Siam journal on mathematical analysis, 51 (2019), 3; 2019-2052 doi:10.1137/18m1182206 (međunarodna recenzija, članak, znanstveni)

doi epubs.siam.org

740.

Huang, Luofeng; Ren, Kang; Li, Minghao; Tuković, Željko; Cardiff, Philip; Thomas, Giles

Fluid-structure interaction of a large ice sheet in waves // Ocean engineering, 182 (2019), 102-111 doi:10.1016/j.oceaneng.2019.04.015 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

741.

Šalinović, Ivan; Stunja, Matea; Schauperl, Zdravko; Verzak, Željko; Ivanišević Malčić, Ana; Brzović Rajić, Valentina

Mehanička svojstva visoko viskoznog stakleno ionomera i staklo hibridnog restaurativnog materijala // Acta stomatologica Croatica, 53 (2019), 2; 125-131 doi:10.15644/asc53/2/4 (međunarodna recenzija, članak, znanstveni)

doi doi.org hrcak.srce.hr

742.

Pavičević, Matija; Kavvadias, Konstantinos; Pukšec, Tomislav; Quoilin, Sylvain

Comparison of different model formulations for modelling future power systems with high shares of renewables – The Dispa-SET Balkans model // Applied energy, 252 (2019), 113425, 18 doi:10.1016/j.apenergy.2019.113425 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

743.

Zanchi, Vedran; Boban, Luka; Soldo, Vladimir

Refrigerant Options in the Near Future // Journal of sustainable development of energy, water and environment systems, 7(2) (2019), 293-304 doi:10.13044/j.sdewes.d6.0250 (međunarodna recenzija, pregledni rad, znanstveni)

doi

744.

Fernandes, Celio; Vukčević, Vuko; Uroić, Tessa; Simoes, Ricardo; Jasak, Hrvoje; Nobrega, Miguel

A coupled finite volume flow solver for the solution of incompressible viscoelastic flows // Journal of non-newtonian fluid mechanics, 265 (2019), 99-115 doi:10.1016/j.jnnfm.2019.01.006 (međunarodna recenzija, članak, znanstveni)

doi

745.

Mikulić, Dinko; Košir, Goran; Marušić, Željko

Kotači automobila kao elementi sigurnosti vožnje i zaštite okoliša // Polytechnic and design, 7 (2019), 1; 8-17 doi:10.19279/TVZ.PD.2019-7-1-02 (međunarodna recenzija, prethodno priopćenje, znanstveni)

doi polytechnicanddesign.tvz.hr

746.

Vukšić, Milan; Žmak, Irena; Ćurković, Lidija; Ćorić, Danko

Effect of Additives on Stability of Alumina—Waste Alumina Suspension for Slip Casting: Optimization Using Box-Behnken Design // Materials, 12 (2019), 11; 1738, 16 doi:10.3390/ma12111738 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada doi www.mdpi.com

747.

Dorotić, Hrvoje; Pukšec, Tomislav; Duić, Neven

Economical, environmental and exergetic multi- objective optimization of district heating systems on hourly level for a whole year // Applied energy, 251 (2019), 1; 113394, 16 doi:10.1016/j.apenergy.2019.113394 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

748.

Tomičević, Zvonimir; Bouterf, Amine; Surma, Robert; Hild, François

Damage observation in glass fiber reinforced composites via μ-tomography // Materials today: proceedings, 12 (2019), 185-191 doi:10.1016/j.matpr.2019.03.093 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

749.

Holik, Mario; Živić, Marija; Virag, Zdravko; Barac, Antun

Optimization of an organic Rankine cycle constrained by the application of compact heat exchangers // Energy conversion and management, 188 (2019), 333-345 doi:10.1016 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

750.

Bedoić, Robert; Ćosić, Boris; Duić, Neven

Technical potential and geographic distribution of agricultural residues, co-products and by- products in the European Union // Science of The Total Environment, 686 (2019), 568-579 doi:10.1016/j.scitotenv.2019.05.219 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com doi.org

751.

Topić, Jakov; Škugor, Branimir; Deur, Joško

Neural Network-Based Modeling of Electric Vehicle Energy Demand and All Electric Range // Energies, 12 (2019), 7; 1396-1416 doi:10.3390/en12071396 (međunarodna recenzija, članak, znanstveni)

doi www.mdpi.com

752.

Matijevic, Bozidar; F. Canale, Bruno; Liscic, Bozidar; Totten; George, E.

Using Thermal Gradient Measurements to Compare Bath Temperature and Agitation Effects on the Quenching Performance of Palm Oil, Canola Oil and a Conventional Petroleum Oil // Materials Performance and Characterization, 1 (2019), 8; 223-248 doi:10.1520/MPC20180135 (međunarodna recenzija, članak, znanstveni)

doi doi.org

753.

Dominković, Dominik; Krajačić, Goran

District Cooling Versus Individual Cooling in Urban Energy Systems: The Impact of District Energy Share in Cities on the Optimal Storage Sizing // Energies, 12 (2019), 3; 1-21 doi:10.3390/en12030407 (međunarodna recenzija, članak, znanstveni)

doi www.mdpi.com

754.

Putar, Filip; Sorić, Jurica; Lesičar, Tomislav; Tonković, Zdenko

A Multiscale Method for Damage Analysis of Quasi-Brittle Heterogeneous Materials // Computer modeling in engineering & sciences, 200(1) (2019), 123-156 doi:10.32604/cmes.2019.06562 (međunarodna recenzija, članak, znanstveni)

doi

755.

Mikulčić, Hrvoje; Jin, Qiming; Stančin, Hrvoje; Wang, Xuebin; Li, Shuaishuai; Tan, Houzhang; Duić, Neven

Thermogravimetric Analysis Investigation of Polyurethane Plastic Thermal Properties Under Different Atmospheric Conditions // Journal of sustainable development of energy, water and environment systems, 7 (2019), 2; 355-367 doi:10.13044/j.sdewes.d6.0254 (međunarodna recenzija, članak, znanstveni)

doi www.sdewes.org

756.

Wang, Xuebin; Zhang, Jiaye; Bai, Shengjie; Zhang, Lan; Li, Yan; Mikulčić, Hrvoje; Chen, Juan; Wang, Liang; Tan, Houzhang

Effect of pyrolysis upgrading temperature on particulate matter emissions from lignite semi- char combustion // Energy conversion and management, 195 (2019), 384-391 doi:10.1016/j.enconman.2019.05.021 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

757.

Brigagão, George Victor; Araújo, Ofélia de Queiroz Fernandes; de Medeiros, José Luiz; Mikulčić, Hrvoje; Duić, Neven

A techno-economic analysis of thermochemical pathways for corncob-to-energy: Fast pyrolysis to bio-oil, gasification to methanol and combustion to electricity // Fuel processing technology, 193 (2019), 102-113 doi:10.1016/j.fuproc.2019.05.011 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

758.

Stančin, Hrvoje; Růžičková, Jana; Mikulčić, Hrvoje; Raclavská, Helena; Kucbel, Marek; Wang, Xuebin; Duić, Neven

Experimental analysis of waste polyurethane from household appliances and its utilization possibilities // Journal of environmental management, 243 (2019), 105-115 doi:10.1016/j.jenvman.2019.04.112 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

759.

Lokas, Lea; Alar, Vesna

The effect of temperature on corrosion behaviour of AA5083 in brackish water and seawater // Materials and corrosion, 70 (2019), 5; 1817-1825 doi:10.1002/maco.201910810 (međunarodna recenzija, članak, znanstveni)

doi onlinelibrary.wiley.com onlinelibrary.wiley.com

760.

Pukšec, Mirjana; Semenski, Damir; Ježek, Damir; Brnčić, Mladen; Karlović, Sven; Jakovčević, Antonia; Bosanac, Goran; Jurlina, Martin

Biomechanical comparison of the temporalis muscle fascia, the fascia lata, and the dura mate // Journal of Neurological Surgery Part B-Skull Base, 80 (2019), 1; 23-30 doi:10.1055/s-0038-1661349 (međunarodna recenzija, članak, znanstveni)

doi

761.

Pejić, Goran; Bijelić, Franjo; Zovak, Goran; Lulić , Zoran

Model for Calculating Average Vehicle Mileage for Different Vehicle Classes Based on Real Data: A Case Study of Croatia // Promet - Traffic & Transportation, 31 (2019), 2; 213-222 doi:10.7307/ptt.v31i2.3043 (međunarodna recenzija, članak, znanstveni)

doi traffic.fpz.hr

762.

Senjanović, Ivo; Alujević, Neven; Ćatipović, Ivan; Čakmak, Damjan; Vladimir, Nikola; Cho, Dae-Seung

Buckling analysis of toroidal shell by Rayleigh-Ritz method // ASME Journal of Pressure Vessel Technology, 141 (2019), 4; 041204, 14 doi:10.1115/1.4043594 (međunarodna recenzija, članak, znanstveni)

doi doi.org pressurevesseltech.asmedigitalcollection.asme.org

763.

Čakmak, Damjan; Tomičević, Zvonimir; Wolf, Hinko; Božić, Željko; Semenski, Damir; Trapić, Ivan

Vibration fatigue study of the helical spring in the base-excited inerter-based isolation system // Engineering failure analysis, 103 (2019), 44-56 doi:10.1016/j.engfailanal.2019.04.064 (međunarodna recenzija, članak, znanstveni)

doi app.box.com authors.elsevier.com www.sciencedirect.com doi.org

764.

Miler, Daniel; Hoić, Matija; Domitran, Zoran; Žeželj, Dragan

Prediction of friction coefficient in dry-lubricated polyoxymethylene spur gear pairs // Mechanism and machine theory, 138 (2019), 205-222 doi:10.1016/j.mechmachtheory.2019.03.040 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

765.

Karasalihović Sedlar, Daria; Vulin, Domagoj; Krajačić, Goran; Jukić, Lucija

Offshore gas production infrastructure reutilisation for blue energy production // Renewable & sustainable energy reviews, 108 (2019), 159-174 doi:10.1016/j.rser.2019.03.052 (međunarodna recenzija, članak, znanstveni)

doi

766.

Mehmeti, Blerim; Kelmendi, Jeta; Ilijazi-Shahiqi, Donika; Azizi, Bleron; Jakovljević, Suzana; Haliti, Fehim; Anić-Milošević, Sandra

Comparison of Shear Bond Strength Orthodontic Brackets Bonded to Zirconia and Lithium Disilicate Crowns // Acta stomatologica Croatica, 53 (2019), 1; 17-27 (međunarodna recenzija, članak, znanstveni)

doi.org hrcak.srce.hr

767.

Trstenjak, Maja; Ćosić, Predrag; Antolić, Dražen

Workpiece Classification Criteria in Automated Process Planning // Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 26 (2019), 1; 256-262 doi:10.17559/TV-20180215105405 (međunarodna recenzija, članak, znanstveni)

doi

768.

Wang, Xuebin; Jin, Qiming; Wang, Liang; Bai, Shengjie; Mikulčić, Hrvoje; Vujanović, Milan; Tan, Houzhang

Synergistic effect of biomass and polyurethane waste co-pyrolysis on soot formation at high temperatures // Journal of environmental management, 239 (2019), 1; 306-315 doi:10.1016/j.jenvman.2019.03.073 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

769.

Jurić, Željko; Ljubas, Davor; Đurđević, Dinko; Luttenberger, Leila

Implementation of the Harmonised Model for Carbon Footprint Calculation on Example of the Energy Institute in Croatia // Journal of Sustainable Development of Energy, Water and Environment Systems, 7 (2019), 2; 368-384 doi:dx..org/10.13044/j.sdewes.d6.0253 (međunarodna recenzija, članak, znanstveni)

doi www.sdewes.org

770.

Degiuli, Nastia; Martić, Ivana; Farkas, Andrea

Environmental aspects of total resistance of container ship in the North Atlantic // Journal of sustainable development of energy, water and environment systems, 7 (2019), 4; 641-655 doi:10.13044/j.sdewes.d7.0267 (međunarodna recenzija, članak, znanstveni)

doi www.sdewes.org

771.

Kozmar, Hrvoje; Laschka, Boris

Wind–tunnel modeling of wind loads on structures using truncated vortex generators // Journal of fluids and structures, 87 (2019), 334-353 doi:10.1016/j.jfluidstructs.2019.03.007 (međunarodna recenzija, članak, znanstveni)

doi

772.

Čizmić, Mirta; Ljubas, Davor; Rožman, Marko; Ašperger, Danijela; Ćurković, Lidija; Babić, Sandra

Photocatalytic degradation of azithromycin by nanostructured TiO2 film: kinetics, degradation products, and toxicity // Materials, 12 (2019), 6; 873, 16 doi:10.3390/ma12060873 (međunarodna recenzija, članak, znanstveni)

doi www.mdpi.com fulir.irb.hr

773.

Pastorčić, Darko; Vukelić, Goran; Božić, Željko

Coil spring failure and fatigue analysis // Engineering failure analysis, 99 (2019), 310-318 doi:10.1016/j.engfailanal.2019.02.017 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

774.

Jurić, Filip; Petranović, Zvonimir; Vujanović, Milan; Katrašnik, Tomaž; Vihar, Rok; Wang Xuebin; Duić, Neven

Experimental and numerical investigation of injection timing and rail pressure impact on combustion characteristics of a diesel engine // Energy conversion and management, 185 (2019), 1; 730-739 doi:10.1016/j.enconman.2019.02.039 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

775.

Alar, Vesna; Horvatić Novak, Amalija; Runje, Biserka; Kurtela, Marin

The effect of CeCl3 inhibitor on the localized corrosion of stainless steel in chloride solutions // Materials and corrosion, 70 (2019), 1273-1287 doi:10.1002/maco.201810509 (međunarodna recenzija, članak, znanstveni)

doi doi.org

776.

Cipek, Mihael; Pavković, Danijel; Kljaić, Zdenko; Mlinarić, Tomislav-Josip

Assessment of Battery-Hybrid Diesel-electric Locomotive Fuel Savings and Emission Reduction Potentials based on a Realistic Mountainous Rail Route // Energy (Oxford), 173 (2019), 1154-1171 doi:10.1016/j.energy.2019.02.144 (međunarodna recenzija, članak, znanstveni)

doi

777.

Opetuk, Tihomir; Cajner, Hrvoje; Đukić, Goran; Kolar, Davor

Concept, Models and Methods of Sustainability in Croatian Companies // Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 26 (2019), 4; 902-912 doi:10.17559/TV-20170719131145 (međunarodna recenzija, članak, znanstveni)

doi hrcak.srce.hr

778.

Kovač, Ankica; Marciuš, Doria; Budin, Luka

Solar hydrogen production via alkaline water electrolysis // International journal of hydrogen energy, 44 (2019), 20; 9841-9848 doi:10.1016/j.ijhydene.2018.11.007 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

779.

Senjanović, Ivo; Čakmak, Damjan; Alujević, Neven; Ćatipović, Ivan; Vladimir, Nikola; Cho, Dae-Seung

Pressure and rotation induced tensional forces of toroidal shell and their influence on natural vibrations // Mechanics research communications, 96 (2019), 1-6 doi:10.1016/j.mechrescom.2019.02.003 (međunarodna recenzija, članak, znanstveni)

doi authors.elsevier.com www.sciencedirect.com

780.

Bakica, Andro; Gatin, Inno; Vukčević, Vuko; Jasak, Hrvoje; Vladimir, Nikola;

Accurate assessment of ship-propulsion characteristics using CFD // Ocean engineering, 175 (2019), 149-162 doi:10.1016/j.oceaneng.2018.12.043 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

781.

Collaço, Flávia Mendes de Almeida; Pereira Dias, Luís; Simoes, Sofia; Pukšec, Tomislav; Seixas, Júlia; Bermann, Célio

What if São Paulo (Brazil) would like to become a renewable and endogenous energy -based megacity? // Renewable energy, 138 (2019), 416-433 doi:10.1016/j.renene.2019.01.073 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com www.sciencedirect.com

782.

Kovač, Ankica; Paranos, Matej

Design of a solar hydrogen refuelling station following the development of the first Croatian fuel cell powered bicycle to boost hydrogen urban mobility // International journal of hydrogen energy, 44 (2019), 20; 10014-10022 doi:10.1016/j.ijhydene.2018.11.204 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

783.

Mendes de Almeida Collaço, Flávia; G. Simoes, Sofia; Dias, Luís Pereira; Duić, Neven; Seixas, Júlia; Bermann, Célio,

The dawn of urban energy planning – Synergies between energy and urban planning for São Paulo (Brazil) megacity // Journal of cleaner production, 215 (2019), 458-479 doi:10.1016/j.jclepro.2019.01.013 (međunarodna recenzija, članak, znanstveni)

doi doi.org www.sciencedirect.com

784.

Wang, Fei; Zhang, Zhanyao; Liu, Chun; Yu, Yili; Pang, Songling; Duić, Neven; Shafie- khah, Miadreza; P.S. Catalao, Joao

Generative adversarial networks and convolutional neural networks based weather classification model for day ahead short-term photovoltaic power forecasting // Energy conversion and management, 181 (2019), 443-462 doi:10.1016/j.enconman.2018.11.074 (međunarodna recenzija, članak, znanstveni)

doi

785.

Mihaljević, Morana; Markučič, Damir; Runje, Biserka; Keran, Zdenka

Measurement uncertainty evaluation of ultrasonic wall thickness measurement // Measurement, 137 (2019), 179-188 doi:10.1016/j.measurement.2019.01.027 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

786.

Jurić, Ivan; Garašić, Ivica; Bušić, Matija; Kožuh, Zoran

Influence of Shielding Gas Composition on Structure and Mechanical Properties of Wire and Arc Additive Manufactured Inconel 625 // Jom-journal of The Minerals metals & Materials Society, 71 (2019), 2; 703-708 doi:10.1007/s11837-018-3151-2 (međunarodna recenzija, članak, znanstveni)

doi link.springer.com doi.org

787.

Grgec Bermanec, Lovorka; Katic, Marko; Zvizdic, Davor

Characterization of gas pressure balances at LPM // Measurement, 136 (2019), 689-693 doi:10.1016/j.measurement.2018.10.070 (međunarodna recenzija, članak, znanstveni)

doi doi.org www.sciencedirect.com

788.

Renno, Carlo; D'Agostino, Diana; Minichiello, Francesco; Petito, Fabio; Balen, Igor

Performance analysis of a CPV/T-DC integrated system adopted for the energy requirements of a supermarket // Applied thermal engineering, 149 (2019), 25; 231-248 doi:10.1016/j.applthermaleng.2018.12.007 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

789.

Perić, Mato; Garašić, Ivica; Tonković, Zdenko; Vuherer, Tomaž; Nižetić, Sandro; Dedić- Jandrek, Hrvoje

Numerical prediction and experimental validation of temperature and residual stress distributions in buried‐arc welded thick plates // International journal of energy research, 43 (2019), 8; 3590-3600 doi:10.1002/er.4506 (međunarodna recenzija, članak, znanstveni)

doi doi.org

790.

Seleš, Karlo; Jurčević, Ante; Tonković, Zdenko; Sorić, Jurica

Crack Propagation Prediction in Heterogeneous Microstructure Using an Efficient Phase-Field Algorithm // Theoretical and applied fracture mechanics, 100 (2019), 289-297 doi:10.1016/j.tafmec.2019.01.022 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com doi.org

791.

Kasać, Josip; Kotarski, Denis; Piljek, Petar

Frequency-Shifting-Based Algebraic Approach to Stable On-Line Parameter Identification and State Estimation of Multirotor UAV // Asian journal of control, 21 (2019), 4; 1619-1629 doi:10.1002/asjc.2042 (međunarodna recenzija, članak, znanstveni)

doi onlinelibrary.wiley.com

792.

Mićić Hot, Jadranka; Seo, Yuki

An interpolation of Jensen's inequality and its converses with applications to quasi-arithmetic mean inequalities // Journal of Mathematical Inequalities, 13 (2019), 1; 105-120 doi:10.7153/jmi-2019-13-08 (međunarodna recenzija, članak, znanstveni)

doi files.ele-math.com files.ele-math.com

793.

Pozzetti, Gabriele; Jasak, Hrvoje; Besseron, Xavier; Rousset, Alban; Peters, Bernhard

A parallel dual-grid multiscale approach to CFD-DEM couplings // Journal of computational physics, 378 (2019), 708-722 doi:10.1016/j.jcp.2018.11.030 (međunarodna recenzija, članak, znanstveni)

doi apps.webofknowledge.com

794.

Sestan, Danijel; Grgec-Bermanec, Lovorka; Zvizdic, Davor

Improved method for pressure measurement in saturation chamber of primary dew/frost point generators // Measurement, 133 (2019), 162-167 doi:10.1016/j.measurement.2018.09.051 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

795.

Baleta, Jakov; Mikulčić, Hrvoje; Klemeš, Jiří Jaromír; Urbaniec, Krzysztof; Duić, Neven

Integration of Energy, Water and Environmental Systems for a Sustainable Development // Journal of cleaner production, 215 (2019), 1424-1436 doi:10.1016/j.jclepro.2019.01.035 (međunarodna recenzija, pregledni rad, znanstveni)

doi

796.

Martinec, Tomislav; Škec, Stanko; Horvat, Nikola; Štorga, Mario

A state-transition model of team conceptual design activity // Research in engineering design, 30 (2019), 1; 103-132 doi:10.1007/s00163-018-00305-1 (međunarodna recenzija, članak, znanstveni)

doi doi.org link.springer.com

797.

Bedoić, Robert; Čuček, Lidija; Ćosić, Boris; Krajnc, Damjan; Smoljanić, Goran; Kravanja, Zdravko; Ljubas, Davor; Pukšec, Tomislav; Duić, Neven

Green biomass to biogas – A study on anaerobic digestion of residue grass // Journal of cleaner production, 213 (2019), 10; 700-709 doi:10.1016/j.jclepro.2018.12.224 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada doi www.sciencedirect.com

798.

Čuček, Lidija; Boldyryev, Stanislav: Klemeš, Jiri Jaromir; Kravanja, Zdravko; Krajačić, Goran; Varbanov, Petar Sabev; Duić, Neven

Approaches for retrofitting heat exchanger networks within processes and Total Sites // Journal of cleaner production, 211 (2019), 884-894 doi:10.1016/j.jclepro.2018.11.129 (međunarodna recenzija, članak, znanstveni)

doi doi.org www.sciencedirect.com

799.

Gatin, Inno; Vladimir, Nikola; Malenica, Šime; Jasak, Hrvoje

Green sea loads in irregular waves with Finite Volume method // Ocean engineering, 171 (2019), 554-564 doi:10.1016/j.oceaneng.2018.10.061 (međunarodna recenzija, članak, znanstveni)

doi

800.

Gledić, Ivana; Parunov, Joško; Prebeg Pero; Ćorak, Maro

Low-cycle fatigue of ship hull damaged in collision // Engineering failure analysis, 96 (2019), 436-454 doi:10.1016/j.engfailanal.2018.11.005 (međunarodna recenzija, članak, znanstveni)

doi

801.

Garbatov, Yordan; Saad-Eldeen, S.; Guedes Soares, C.; Parunov, Joško; & Kodvanj, Janoš

Tensile test analysis of corroded cleaned aged steel specimens // Corrosion engineering, science and technology, 54 (2019), 2; 154-162 doi:10.1080/1478422X.2018.1548098 (međunarodna recenzija, članak, znanstveni)

doi www.tandfonline.com

802.

Glodež, Srečko; Vučković, Krešimir; Šori, Marko; Surjak, Martin; Zupanič, Franc

The influence of thermal treatment on the low-cycle fatigue behaviour of Cu-Ni-Mo sintered steel // Mechanics of materials, 129 (2019), 57-62 doi:10.1016/j.mechmat.2018.11.001 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com doi.org

803.

Jakovljević, Suzana; Lisjak, Dragutin

Investigation into the effects of humidity on the mechanical and physical properties of bamboo // Construction and building materials, 194 (2019), 386-396 doi:10.1016/j.conbuildmat.2018.11.030 (međunarodna recenzija, članak, znanstveni)

doi

804.

Čakmak, Damjan; Tomičević, Zvonimir; Wolf, Hinko; Božić, Željko

H2 optimization and numerical study of inerter-based vibration isolation system helical spring fatigue life // Archive of applied mechanics, 89 (2019), 7; 1221-1242 doi:10.1007/s00419-018-1495-2 (međunarodna recenzija, članak, znanstveni)

doi link.springer.com app.box.com www.springer.com doi.org rdcu.be link.springer.com links.springernature.com

805.

Farkas, Andrea; Degiuli, Nastia; Martić, Ivana; Dejhalla, Roko

Numerical and experimental assessment of nominal wake for a bulk carrier // Journal of marine science and technology, 24 (2019), 4; 1092-1104 doi:10.1007/s00773-018-0609-4 (međunarodna recenzija, članak, znanstveni)

doi link.springer.com

806.

Krolo, Jure; Lela, Branimir; Švagelj, Zrinka; Jozić, Sonja

Adaptive neuro-fuzzy and regression models for predicting microhardness and electrical conductivity of solid-state recycled EN AW 6082 // International journal of advanced manufacturing technology, 100 (2019), 9/12; 2981-2993 doi:10.1007/s00170-018-2893-x (međunarodna recenzija, članak, znanstveni)

doi link.springer.com doi.org

807.

Pfeifer, Antun; Krajačić, Goran; Ljubas, Davor; Duić, Neven

Increasing the integration of solar photovoltaics in energy mix on the road to low emissions energy system – Economic and environmental implications // Renewable energy, 143 (2019), 1310-1317 doi:10.1016/j.renene.2019.05.080 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

808.

Balog, Martin; Ibrahim, Ahmed Mohamed Hassan; Krizik, Peter; Bajana, Oto; Klimova, Alena; Catic, Amir; Schauperl, Zdravko

Bioactive Ti + Mg composites fabricated by powder metallurgy: The relation between the microstructure and mechanical properties // Journal of the mechanical behavior of biomedical materials, 90 (2019), 45-53 doi:10.1016/j.jmbbm.2018.10.008 (međunarodna recenzija, članak, znanstveni)

doi www.researchgate.net doi.org

809.

Džijan, Ivo; Pašić, Aleksandar; Buljac, Andrija; Kozmar, Hrvoje

Aerodynamic forces acting on a race car for various ground clearances and rake angles // Journal of Applied Fluid Mechanics, 12 (2019), 2; 361-368 doi:10.18869/acadpub.jafm.75.254.28706 (međunarodna recenzija, članak, znanstveni)

doi jafmonline.net

810.

Cipek, Mihael; Petrić, Joško; Pavković , Danijel

A Novel Approach to Hydraulic Drive Sizing Methodology and Efficiency Estimation based on Willans Line // Journal of sustainable development of energy, water and environment systems, 7 (2019), 1; 155-167 doi:10.13044/j.sdewes.d6.0238 (međunarodna recenzija, članak, znanstveni)

doi www.sdewes.org

811.

Landek, Darko; Jakovljević, Suzana; Alar, Vesna; Kovačić, Saša

Effect of steel substrate on the corrosion properties of a gradient multilayer TiN/TiCN coating deposited by the PACVD process // Materials and corrosion, 70 (2019), 2; 307-318 doi:10.1002/maco.201810358 (međunarodna recenzija, članak, znanstveni)

doi doi.org onlinelibrary.wiley.com

812.

Kozmar, Hrvoje; Laschka, Boris

Pressure tap cavity for unsteady aerodynamic pressure measurements // Measurement, 132 (2019), 282-291 doi:10.1016/j.measurement.2018.09.056 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

813.

Li, Yan; Wang, Xuebin; Tan, Houzhang; Bai, Shengjie; Mikulčić, Hrvoje; Yang, Fuxin

Evolution of PM2.5 from biomass high-temperature pyrolysis in an entrained flow reactor // Journal of the energy institute, 92 (2019), 5; 1548-1556 doi:10.1016/j.joei.2018.07.019 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

814.

Zebić Avdičević, Maja; Košutić, Krešimir; Dobrović, Slaven

Performance evaluation of different membrane types in the textile mercerization wastewater treatment // Water and environment journal, 33 (2019), 2; 203-213 (međunarodna recenzija, članak, znanstveni)

815.

Bago, Ivona; Suk, Mateja; Katić, Marko; Gabrić, Dragana; Anić, Ivica

Comparison of the effectiveness of various rotary and reciprocating systems with different surface treatments to remove gutta‐percha and an epoxy resin‐based sealer from straight root canals // International endodontic journal, 52 (2019), 1; 105-113 doi:10.1111/iej.12985 (međunarodna recenzija, članak, znanstveni)

doi doi.org onlinelibrary.wiley.com

816.

Wang, Xuebin; Li, Yan; Bai, Shengjie; Jin, Qiming; Mikulčić, Hrvoje; Tan, Houzhang; Vujanović, Milan

Nano-Scale Soot Particle Formation During the High-Temperature Pyrolysis of Waste Plastics in an Entrained Flow Reactor // Waste and Biomass Valorization, 10 (2019), 12; 3857-3866 doi:10.1007/s12649-018-0322-x (međunarodna recenzija, članak, znanstveni)

doi link.springer.com

817.

Čakmak, Damjan; Wolf, Hinko; Božić, Željko; Jokić, Marko

Optimization of an inerter-based vibration isolation system and helical spring fatigue life assessment // Archive of applied mechanics, 89 (2019), 5; 859-872 doi:10.1007/s00419-018-1447-x (međunarodna recenzija, članak, znanstveni)

doi app.box.com links.springernature.com www.springer.com doi.org rdcu.be link.springer.com link.springer.com

818.

Senjanović, Ivo; Ančić, Ivica; Magazinović, Gojko; Alujević, Neven; Vladimir, Nikola; Cho, Dae Seung

Validation of analytical methods for the estimation of the torsional vibrations of ship power transmission systems // Ocean engineering, 184 (2019), 107-120 doi:10.1016/j.oceaneng.2019.04.016 (međunarodna recenzija, članak, znanstveni)

doi authors.elsevier.com

819.

Senjanović, Ivo; Hadžić, Neven; Murawski, Lech; Vladimir, Nikola; Alujević, Neven; Cho; Dae Seung

Analytical procedures for torsional vibration analysis of ship power transmission system // Engineering structures, 178 (2019), 227-244 doi:10.1016/j.engstruct.2018.10.035 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada doi www.sciencedirect.com

820.

Alujević, Neven; Senjanović, Ivo; Ćatipović, Ivan; Vladimir, Nikola

The absence of reciprocity in active structures using direct velocity feedback // Journal of sound and vibration, 438 (2019), 251-256 doi:10.1016/j.jsv.2018.09.035 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada doi authors.elsevier.com doi.org

821.

Senjanović, Ivo; Ćatipović, Ivan; Alujević, Neven; Čakmak, Damjan; Vladimir, Nikola

A finite strip for the vibration analysis of rotating toroidal shell under internal pressure // ASME Journal of Vibration and Acoustics, 141 (2019), 2; 021013, 17 doi:10.1115/1.4041734 (međunarodna recenzija, članak, znanstveni)

doi

822.

Alujević, Neven; Ćatipović, Ivan; Malenica, Šime; Senjanović, Ivo; Vladimir, Nikola.

Ship roll control and energy absorption using a U- tube anti-roll tank // Ocean engineering, 172 (2019), 857-870 doi:10.1016/j.oceaneng.2018.12.007 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada doi

823.

Wang, Xuebin; Kumfer, Benjamin; Tan, Houzhang; Mikulčić, Hrvoje; Vujanović, Milan; Jin, Qiming; Li, Shuaishuai; Deng, Shuanghui; Bešenić, Tibor

Synergistic effects during co-pyrolysis of biomass and plastic: gas, tar, soot, char products and thermogravimetric study // Journal of the energy institute, 92 (2019), 1; 108-117 doi:10.1016/j.joei.2017.11.001 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

824.

Marinković, Bojan; Glavan, Paola; Ognjanović, Zoran

Proving properties of the Chord protocol using the ASM formalism // Theoretical computer science 756, 756 (2019), 64-93 doi:10.1016/j.tcs.2018.10.025 (međunarodna recenzija, članak, znanstveni)

doi

825.

Rončević, Branimir; Bakić, Ante; Kodvanj, Janoš

Numerical Receding Contact Analysis of a Perfect-Fit Pin and Bushing in a Loaded Plate // Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 25 (2018), Supplement 2; 283-290 doi:10.17559/TV-2016042519321 (međunarodna recenzija, članak, znanstveni)

doi hrcak.srce.hr

826.

Šitum, Željko; Trslić, Petar

Ball and Beam Balancing Mechanism Actuated with Pneumatic Artificial Muscles // Journal of Mechanisms and Robotics-Transactions of the ASME, 10 (2018), 5; 055001-1 doi:10.1115/1.4040490 (međunarodna recenzija, članak, znanstveni)

doi asmedigitalcollection.asme.org

827.

Vuilleumier, David; Atef, Nour; Kukkadapu, Goutham; Wolk, Benjamin; Selim, Hatem; Kozarac, Darko; Saxena, Samveg; Wang, Zhaowen; Sung, Chih- Jen; Dibble, Robert; Sarathy S.Mani

The Influence of Intake Pressure and Ethanol Addition to Gasoline on Single- and Dual-Stage Autoignition in an HCCI Engine // Energy & fuels, 32 (2018), 9; 9822-9837 doi:10.1021/acs.energyfuels.8b00887 (međunarodna recenzija, članak, znanstveni)

doi pubs.acs.org

828.

Klobčar, Damjan; Lindič, Maja; Bušić, Matija

Wire arc additive manufacturing of mild steel // RMZ - Materials and geoenvironment, 65 (2018), 4; 179-186 doi:10.2478/rmzmag-2018-0015 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada doi

829.

Babić, Milena; Verić, Ozren; Božić, Željko; Sušić, Aleksandar

Reverse engineering based integrity assessment of a total hip prosthesis // Procedia Structural Integrity, 13 (2018), 438-443 doi:10.1016/j.prostr.2018.12.073 (međunarodna recenzija, članak, znanstveni)

doi

830.

Beale, S. B.; Reimer, U.; Froning, D.; Jasak, H.; Andersson, M.; Pharoah, J. G.; Lehnert, W.

Stability Issues of Fuel Cell Models in the Activation and Concentration Regimes // Journal of Electrochemical Energy Conversion and Storage, 15 (2018), 4; 41008, 7 doi:10.1115/1.4039858 (međunarodna recenzija, članak, znanstveni)

doi

831.

Kozhushko, Yuliia; Karbivska, Tetiana; Zinchenko, Denys; Pavković, Danijel; Rosolowski, Eugeniusz; Bondarenko, Oleksandr

Charging Device of Capacitive Energy Storage for Micro Resistance Welding // Present Problems of Power System Control, 9 (2018), 5-18 (međunarodna recenzija, članak, znanstveni)

www.psc.pwr.wroc.pl

832.

Sorić, Jurica; Jalušić, Boris; Jarak, Tomislav

Meshless approach as an alternative to finite element method in solid mechanics numerical modeling // Rad Hrvatske akademije znanosti i umjetnosti. Tehničke znanosti, 19 (2018), 33-58 (domaća recenzija, članak, znanstveni)

833.

Tuković, Željko; Karač, Aleksandar; Cardiff, Philip; Jasak, Hrvoje; Ivanković, Alojz

OpenFOAM Finite Volume Solver for Fluid-Solid Interaction // Transactions of FAMENA, 42 (2018), 3; 1-31 doi:10.21278/tof.42301 (međunarodna recenzija, članak, znanstveni)

doi hrcak.srce.hr

834.

Ivančević, Darko; Smojver, Ivica; Leko, Marko

Numerical Approach in the Evaluation of Aeronautical Structures Ballistic Protection // Transportation Research Procedia, 35 (2018), 190-199 doi:10.1016/j.trpro.2018.12.029 (međunarodna recenzija, članak, znanstveni)

doi reader.elsevier.com

835.

Jin, Wang; VujanoviĆ, Milan; Bengt, Sunden

A review of multiphase flow and deposition effects in film-cooled gas turbines // Thermal science, 22 (2018), 5; 1905-1921 doi:10.2298/tsci180108258w (međunarodna recenzija, pregledni rad, znanstveni)

doi www.doiserbia.nb.rs

836.

Švaco, Marko; Vitez, Nikola; Šekoranja, Bojan; Šuligoj, Filip

Tuning of Parameters for Robotic Contouring Based on the Evaluation of Force Deviation // Transactions of FAMENA, 42 (2018), 3; 33-45 doi:10.21278/TOF.42302 (međunarodna recenzija, članak, znanstveni)

doi hrcak.srce.hr

837.

Miketić, Branimir; Stojanović, Ivan

Utjecaj pripreme površine na prionjivost i potrošnju premaza // Zavarivanje, 61 (2018), 5/6; 143-156 (domaća recenzija, prethodno priopćenje, znanstveni)

838.

Opetuk, Tihomir; Đukić, Goran; Cajner, Hrvoje; Kolar, Davor

Green supply chain management in Croatian companies // Tehnički glasnik, 12 (2018), 4; 211-220 doi:10.31803/tg-20180207144632 (međunarodna recenzija, članak, znanstveni)

doi hrcak.srce.hr doi.org hrcak.srce.hr

839.

Đukić, Goran; Opetuk, Tihomir; Cajner, Hrvoje; Jakovljević, Matko

Simulation analysis of models for estimation of empty travel time of vehicles in non-automated material handling systems // FME Transaction, 46 (2018), 3; 336-341 doi:10.5937/fmet1803336d (međunarodna recenzija, članak, znanstveni)

doi

840.

Heffer, Goran; Samardžić, Ivan; Schauperl, Zdravko; Vidaković, Ivan

Wear of induction cladded coating in the abrasive mass at various speeds and impact angles // Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 25 (2018), 6; 1776-1782 doi:.org/10.17559/TV-20180706121545 (međunarodna recenzija, članak, znanstveni)

doi hrcak.srce.hr hrcak.srce.hr hrcak.srce.hr

841.

Delimar, Domagoj; Bohaček, Ivan; Dimnjaković, Damjan; Viderščak, Dalibor; Schauperl, Zdravko

Femoral head wear and metallosis caused by damaged titanium porous coating after primary metal-on-polyethylene total hip arthroplasty: a case report // Croatian medical journal, 59 (2018), 5; 253-257 doi:10.3325/cmj.2018.59.253 (međunarodna recenzija, članak, znanstveni)

doi www.cmj.hr www.ncbi.nlm.nih.gov www.researchgate.net

842.

Grgec Bermanec, Lovorka; Pantic, Dragan; Ramac, Boris

Final report on comparison of hydraulic pressure balance effective area determination in the range up to 80 MPa // Metrologia, 55 (2018), 07005, 15 doi:10.1088/0026-1394/55/1A/07005 (međunarodna recenzija, članak, znanstveni)

doi iopscience.iop.org

843.

Grgec Bermanec, Lovorka; Katic, Marko

Interferometric determination of thermal expansion coefficient of piston/cylinder unit – preliminary investigation // Journal of physics. Conference series, 1065 (2018), 162016, 4 doi:10.1088/1742-6596/1065/16/162016 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada doi iopscience.iop.org

844.

Cholewa, Tomasz; Balen, Igor; Siuta-Olcha, Alicja

On the influence of local and zonal hydraulic balancing of heating system on energy savings in existing buildings – Long term experimental research // Energy and buildings, 179 (2018), 15; 156-164 doi:10.1016/j.enbuild.2018.09.009 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

845.

Cigan, Vesna

Terminological collocations and term variation in mechanical engineering discourse // Fluminensia, 30 (2018), 2; 91-120 doi:10.31820/f.30.2.3 (recenziran, članak, znanstveni)

doi hrcak.srce.hr doi.org hrcak.srce.hr

846.

Ćatipović, Ivan; Ćorak, Maro; Parunov, Joško; Alujević, Neven

Seakeeping experiments on damaged ship // Ships and Offshore Structures, 14 (2018), suppl. 1; 100-111 doi:10.1080/17445302.2018.1559911 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada doi www.tandfonline.com

847.

Mehmeti, Blerim; Haliti, Fehim; Azizi Bleron; Kelmendi Jeta; Ilijazi Shahiqi, Donika; Jakovljević, Suzana; Anić- Milošević, Sandra

Influence of different orthodontic brackets and chemical preparations of ceramic crowns on shear bond strength // Australasian medical journal, 11 (2018), 2; 107-112 doi:10.21767/amj.2018.3318 (međunarodna recenzija, članak, znanstveni)

doi amj.net.au doi.org

848.

Filtz, J-R; Hay, B; Arifovic, N; Sadli, M; Failleau, G; Mac Lochlainn, D; Bojkovski, J; Boles, S; Bourson, F; Cohodarevic, S et al.

Speeding-up Scientific Knowledge Transfer and Improvement of Capabilities of emerging European National Metrology Institutes and Designated Institutes in the field of thermal measurements: Benefits and Impacts // Journal of Physics: Conference Series, 1065 (2018), 022001, 4 doi:10.1088/1742-6596/1065/2/022001 (međunarodna recenzija, članak, znanstveni)

doi iopscience.iop.org

849.

Hodžić, N; Čohodarević, S; Jandrić, N; Strnad, R; Zvizdić, D; Šestan, D; Fernicola, V; Smorgon, D; Iacomini, L; Simić, S et al.

Improving emerging European NMIs’ capabilities in humidity measurement // Journal of Physics: Conference Series, 1065 (2018), 122019, 4 doi:10.1088/1742-6596/1065/12/122019 (međunarodna recenzija, članak, znanstveni)

doi iopscience.iop.org www.imeko2018.org

850.

Šestan, D; Smorgon, D; Rothmund, P; Iacomini, L; Šariri, K; Fernicola, V; Zvizdić, D; Hodžić, N

Development and preliminary investigation of a modular chamber for calibration of relative humidity instruments // Journal of Physics: Conference Series, 1065 (2018), 122017, 4 doi:10.1088/1742-6596/1065/12/122017 (međunarodna recenzija, članak, znanstveni)

doi iopscience.iop.org

851.

Zvizdić, Davor; Grgec Bermanec, Lovorka; Šestan, Danijel

Distributed structure of Croatian metrology institute // Journal of Physics: Conference Series, 1065 (2018), 112002, 4 doi:10.1088/1742-6596/1065/11/112002 (međunarodna recenzija, članak, znanstveni)

doi iopscience.iop.org

852.

Ćurković, Lidija; Ašperger, Danijela; Babić, Sandra; Župan, Josip

Adsorption of enrofloxacin onto natural zeolite: kinetics, thermodynamics, isotherms and error analysis // Indian journal of chemical technology, 25 (2018), 6; 565-571 (međunarodna recenzija, članak, znanstveni)

op.niscair.res.in op.niscair.res.in

853.

Dorotić, Hrvoje; Pukšec, Tomislav; Duić, Neven

Multi-objective optimization of district heating and cooling systems for a one-year time horizon // Energy (Oxford), 169 (2018), 319-328 (međunarodna recenzija, članak, znanstveni)

www.sciencedirect.com

854.

Ljubas, Davor; Čizmić, Mirta; Vrbat, Katarina; Stipaničev, Draženka; Repec, Siniša; Ćurković, Lidija; Babić, Sandra

Albendazole degradation possibilities by UV-based advanced oxidation processes // International journal of photoenergy, 2018 (2018), 6181747, 6 doi:10.1155/2018/6181747 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada doi dx.doi.org www.hindawi.com

855.

Perić, Mato; Garašić, Ivica; Nižetić, Sandro; Dedić Jandrek, Hrvoje

Numerical Analysis of Longitudinal Residual Stresses and Deflections in a T-joint Welded Structure Using a Local Preheating Technique // Energies, 11 (2018), 12; 1-13 doi:10.3390/en11123487 (međunarodna recenzija, članak, znanstveni)

doi

856.

Novaković, Branko

Unification of SR and GR and Four Fundamental Interactions in RAF Theory // International Journal of New Technology and Research (IJNTR), 4 (2018), 11; 26-33 doi:10.31871/IJNTR.4.11.11 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada doi www.ijntr.org

857.

Novakovic, Branko

Physical Properties of Energy-Momentum Tensor of Gravitational Field in RAF Theory // International Journal of New Technology and Research, 4 (2018), 11; 19-25 doi:10.31871/IJNTR.4.11.10 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada doi www.ijntr.org

858.

Cvijetić, Gregor; Gatin, Inno; Vukčević, Vuko; Jasak, Hrvoje

Harmonic Balance developments in OpenFOAM // Computers & fluids, 172 (2018), 632-643 doi:10.1016/j.compfluid.2018.02.023 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

859.

Spoerk, Martin; Gonzalez-Gutierrez, Joamin; Lichal, Christof; Cajner, Hrvoje; R. Berger, Gerald; Schuschnigg, Stephan; Cardon, L.; Holzer, Clemens

Optimisation of the Adhesion of Polypropylene- Based Materials during Extrusion-Based Additive Manufacturing // Polymers, 10 (2018), 5; 490, 16 doi:10.3390/polym10050490 (međunarodna recenzija, članak, znanstveni)

doi doi.org

860.

Mikulić, Antonio; Parunov, Joško; Soares, Carlos Guedes

Wave-Induced Vertical Motions and Bending Moments in Damaged Ships // Journal of Marine Science and Application, 17 (2018), 389-405 doi:10.1007/s11804-018-0050-4 (međunarodna recenzija, članak, znanstveni)

doi link.springer.com

861.

Špiljar, Željko; Schneider, Daniel Rolph; Drakulić, Miodrag

Analysis of Smoke Stratification and Smoke Layer Thickness in Underground Car Parks // Thermal science, 22 (2018), 5; 1963-1972 doi:10.2298/TSCI180120262S (međunarodna recenzija, članak, znanstveni)

doi thermalscience.vinca.rs

862.

Sever, Ivana; Žmak, Irena; Ćurković, Lidija; Švagelj, Zrinka

Stabilization of Highly Concentrated Alumina Suspensions by Different Dispersants // Transactions of FAMENA, 42 (2018), 3; 61-70 doi:10.21278/TOF.42304 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada doi hrcak.srce.hr doi.org

863.

Leder Horina, Jasna; van Rietbergen, Bert; Jurčević Lulić, Tanja

Finite element model of load adaptive remodelling induced by orthodontic forces // Medical engineering & physics, 62 (2018), 63-68 doi:10.1016/j.medengphy.2018.10.005 (međunarodna recenzija, članak, znanstveni)

doi doi.org www.sciencedirect.com

864.

Senjanović, Ivo; Ćatipović, Ivan; Alujević, Neven; Čakmak, Damjan; Vladimir, Nikola.

Free in-plane and out-of-plane vibrations of rotating thin ring based on the toroidal shell theory // Archives of mechanics, 70 (2018), 5; 429-455 doi:10.24423/aom.3013 (međunarodna recenzija, članak, znanstveni)

doi am.ippt.pan.pl am.ippt.pan.pl

865.

Pilipović, Ana; Brajlih, Tomaž; Drstvenšek, Igor

Influence of Processing Parameters on Tensile Properties of SLS Polymer Product // Polymers, 10 (2018), 11; 1-18 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada www.mdpi.com

866.

Dorotić, Hrvoje; Doračić, Borna; Dobravec, Viktorija; Pukšec, Tomislav; Krajačić, Goran; Duić, Neven

Integration of transport and energy sectors in island communities with 100% intermittent renewable energy sources // Renewable & sustainable energy reviews, 99 (2018), 109-124 doi:10.1016/j.rser.2018.09.033 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

867.

Trapić, Ivan; Pezer, Robert; Sorić, Jurica

Atomistic Modelling of 2D Stress Distribution Around Discontinuities // Transactions of FAMENA, 42 (2018), 3; 47-60 doi:10.21278/tof.42303 (međunarodna recenzija, članak, znanstveni)

doi hrcak.srce.hr

868.

Lund, Henrik; Duić, Neven; Østergaard, Poul Alberg; Mathiesen, Brian Vad

Future district heating systems and technologies: On the role of smart energy systems and 4th generation district heating // Energy (Oxford), 165 (2018), 614-619 doi:10.1016/j.energy.2018.09.115 (međunarodna recenzija, pregledni rad, znanstveni)

doi

869.

Jakšetić, Julije; Pečarić, Josip; Smoljak Kalamir, Ksenija

Bellman-Steffensen type inequalities // Journal of inequalities and applications, 2018 (2018), 288, 15 doi:10.1186/s13660-018-1882-9 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada doi journalofinequalitiesandapplications.springeropen.com

870.

Capjak, Ivona; Zebić Avdičević, Maja; Dutour Sikirić, Maja; Domazet Jurašin, Darija; Amela Hozić, Amela; Pajić, Damir; Dobrović, Slaven; Goessler, Walter; Vinkovic Vrcek, Ivana

Behavior of silver nanoparticles in wastewater: systematic investigation on the combined effects of surfactants and electrolytes in the model systems // Environmental Science: Water Research and Technology, 4 (2018), 2146-2159 doi:10.1039/C8EW00317C (međunarodna recenzija, članak, znanstveni)

doi pubs.rsc.org pubs.rsc.org

871.

Ćosić Lesičar, Jelena; Radišić, Tomislav; Bucak, Tino; Stepanić, Josip

Static Sensitivity of the Aerial Load Transport by Two Rotocopter Unmanned Aerial Vehicles // Tehnički vjesnik, 25 (2018), Supplement 2; 396-403 doi:10.17559/TV-20170921102227 (recenziran, članak, znanstveni)

doi hrcak.srce.hr

872.

Pavković, Danijel; Cipek, Mihael; Kljaić, Zdenko; Mlinarić, Tomislav-Josip; Hrgetić, Mario; Zorc, Davor

Damping Optimum-Based Design of Control Strategy Suitable for Battery/Ultracapacitor Electric Vehicles // Energies, 11 (2018), 10; 2854, 26 doi:10.3390/en11102854 (međunarodna recenzija, članak, znanstveni)

doi www.mdpi.com

873.

Domitran, Zoran; Brezak, Danko; Staroveški, Tomislav; Klaić, Miho; Bruketa, Tomislav

Experimental and finite element analysis of surgical drill bits with and without irrigation channel – A case study approach // Medical engineering & physics, 62 (2018), 29-35 doi:10.1016/j.medengphy.2018.10.004 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

874.

Cho, Dae Seung; Kim, Jin Hyeong; Choi, Tae Muk; Kim, Byung Hee; Vladimir, Nikola

Free and forced vibration analysis of arbitrarily supported rectangular plate systems with attachments and openings // Engineering structures, 171 (2018), 1036-1046 doi:10.1016/j.engstruct.2017.12.032 (međunarodna recenzija, članak, znanstveni)

doi

875.

Monge Soria, Joao Carlos; Mantari Laureano, Jose Luis; Charca Mamani, Samuel; Vladimir, Nikola

An axiomatic/asymptotic evaluation of the best theories for free vibration of laminated and sandwich shells using non-polynomial functions // Engineering structures, 172 (2018), 1011-1024 doi:10.1016/j.engstruct.2018.06.020 (međunarodna recenzija, članak, znanstveni)

doi

876.

Cho, Dae Seung; Choi, Tae Muk; Kim, Jin Hyeong; Vladimir, Nikola

Dominant components of vibrational energy flow in stiffened panels analysed by the structural intensity technique // International Journal of Naval Architecture and Ocean Engineering, 10 (2018), 5; 583-595 doi:10.1016/j.ijnaoe.2017.11.003 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada doi

877.

Seleš, Karlo; Lesičar, Tomislav; Tonković, Zdenko; Sorić, Jurica

A Residual Control Staggered Solution Scheme for the Phase-Field Modeling of Brittle Fracture // Engineering fracture mechanics, 205 (2018), 1; 370-386 doi:10.1016/j.engfracmech.2018.09.027 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

878.

Šuligoj, F.; Jerbić, B.; Švaco, M.; Šekoranja, B.

Fully Automated Point-Based Robotic Neurosurgical Patient Registration Procedure // International Journal of Simulation Modelling, 17 (2018), 3; 458-471 doi:10.2507/ijsimm17(3)442 (međunarodna recenzija, članak, znanstveni)

doi www.ijsimm.com

879.

Jakšetić, Julije; Pečarić, Josip; Smoljak Kalamir, Ksenija

Exponential convexity induced by Steffensen's inequality and positive measures // Results in mathematics, 73 (2018), 4; 136, 18 (međunarodna recenzija, članak, znanstveni)

rdcu.be

880.

Qi, Fengsheng; Wang, Zisong; Li, Baokuan; He, Zhu; Baleta, Jakov; Vujanovic, Milan

Numerical study on characteristics of combustion and pollutant formation in a reheating furnace // Thermal science, 22 (2018), 5; 1-11 doi:10.2298/tsci180118277q (međunarodna recenzija, članak, znanstveni)

doi thermalscience.vinca.rs

881.

Lund, Henrik; Alberg Østergaard, Poul; Chang, Miguel; Werner, Sven; Svendsen, Svend; Sorknæs, Peter; Thorsen, Jan Eric; Hvelplund, Frede; Ole Gram Mortensen, Bent; Vad Mathiesenf, Brian et al.

The status of 4th generation district heating: Research and results // Energy (Oxford), 164 (2018), 147-159 doi:10.1016/j.energy.2018.08.206 (međunarodna recenzija, pregledni rad, znanstveni)

doi

882.

Calise, Francesco; Costa, Mário; Wang, Qiuwang; Zhang, Xiliang; Duić, Neven

Recent Advances in the Analysis of Sustainable Energy Systems // Energies, 11 (2018), 10; 1-30 doi:10.3390/en11102520 (međunarodna recenzija, pregledni rad, znanstveni)

doi www.mdpi.com

883.

Zhu, Yiming; Tan, Houzhang; Niu, Yanqing; Wang, Yibin; Mikulčić, Hrvoje; Vujanović, Milan; Duić, Neven

Modelling study on the effect of ash fusion characteristics on the biomass slagging behavior // Thermal science, 22 (2018), 5; 2113-2121 doi:10.2298/tsci171229268z (međunarodna recenzija, članak, znanstveni)

doi www.doiserbia.nb.rs

884.

Kasać, Josip; Majetić, Dubravko; Brezak, Danko

An algebraic approach to on-line signal denoising and derivatives estimation // Journal of the franklin institute-engineering and applied mathematics, 355 (2018), 15; 7799-7825 doi:10.1016/j.jfranklin.2018.08.016 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada doi www.sciencedirect.com doi.org

885.

Seleš, Karlo; Lesičar, Tomislav; Tonković, Zdenko; Sorić, Jurica

A Phase Field Staggered Algorithm for Fracture Modeling in Heterogeneous Microstructure // Key Engineering Materials, 774 (2018), 632-637 doi:10.4028/www.scientific.net/kem.774.632 (međunarodna recenzija, članak, znanstveni)

doi www.scientific.net

886.

Hegedić, Miro; Gudlin, Mihael; Štefanić, Nedeljko

Relationship between lean and green management in Croatian manufacturing companies // Interdisciplinary description of complex systems, 16 (2018), 1; 21-39 doi:10.7906/indecs.16.1.2 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada doi indecs.eu hrcak.srce.hr

887.

Jasak, Hrvoje; Vukčević, Vuko; Gatin, Inno; Lalović, Igor

CFD validation and grid sensitivity studies of full scale ship self propulsion // International Journal of Naval Architecture and Ocean Engineering, 1 (2018), 1-11 doi:10.1016/j.ijnaoe.2017.12.004 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada doi www.sciencedirect.com

888.

Tomić, Tihomir; Schneider, Daniel Rolph

The role of energy from waste in circular economy and closing the loop concept – Energy analysis approach // Renewable & sustainable energy reviews, 98 (2018), 268-287 doi:10.1016/j.rser.2018.09.029 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com doi.org

889.

Dubreta, Nikša; Bulian, Luka

Engineering Job Skills in Croatian Economy: Employers’ Perspective // Interdisciplinary description of complex systems, 16 (2018), 1; 1-20 doi:10.7906/indecs.16.1.1 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada doi indecs.eu hrcak.srce.hr

890.

Krajček Nikolić, Karolina; Domitrović, Anita; Janković, Slobodan

Estimation of Aerodynamic Coefficients in a Small Subsonic Wind Tunnel // Promet, 30 (2018), 4; 457-463 doi:10.7307/ptt.v30i4.2685 (recenziran, članak, znanstveni)

doi traffic.fpz.hr traffic.fpz.hr doi.org

891.

Rešetar, Marko; Pejić, Goran; Lulić, Zoran

Changes and trends in the Croatian road vehicle fleet – Need for change of policy measures // Transport policy, 71 (2018), 92-105 doi:10.1016/j.tranpol.2018.08.005 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

892.

Lulić, Fabijan; Virag, Zdravko; Jakopović, Marko; Korade, Ivan

Noninvasive determination of the pulmonary artery input impedance // Medical hypotheses, 120 (2018), 7-13 doi:10.1016/j.mehy.2018.08.007 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

893.

Perišić, Marija Majda; Štorga, Mario; Podobnik, Vedran

Agent-Based Modelling and Simulation of Product Development Teams // Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 25 (2018), Supplement 2; 524-532 doi:10.17559/TV-20170912134413 (međunarodna recenzija, pregledni rad, znanstveni)

doi

894.

Novaković, Branko

Quantum Gravity in Relativistic Alpha Field Theory (QG in RAFT) // International Journal of New Technology and Research (IJNTR), 4 (2018), 6; 46-51 doi:10.31871/IJNTR.4.6.4 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada doi doi.org www.researchgate.net

895.

Lindič, Maja; Podlipec, Boštjan; Bušić, Matija; Klobčar, Damjan

Toplotna obdelava maraging jekla, navarjenega s postopkom oblikovnega obločnega navarjanja z žico // Ventil, 24 (2018), 4; 302-307 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada

896.

Hegedić, Miro; Štefanić, Nedeljko; Nikšić, Mladen

Assessing the Environmental Impact of the Self- propelled Bulk Carriage through LCA // Promet - Traffic & Transportation, 30 (2018), 3; 257-266 doi:10.7307/ptt.v30i3.2445 (međunarodna recenzija, članak, znanstveni)

doi traffic.fpz.hr

897.

Pfeifer, Antun; Dobravec, Viktorija; Pavlinek, Luka; Krajačić, Goran; Duić, Neven

Integration of renewable energy and demand response technologies in interconnected energy systems // Energy (Oxford), 161 (2018), 15; 447-455 doi:10.1016/j.energy.2018.07.134 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

898.

Aleksandrov Fabijanic, Tamara; Katic, Marko; Menelao, Febo

Metrological characteristics of newly developed reference Vickers hardness block for the high hardness range // Metrologia, 55 (2018), 5; - doi:10.1088/1681-7575/aadd78 (međunarodna recenzija, članak, znanstveni)

doi iopscience.iop.org

899.

Ančić, Ivica; Vladimir, Nikola; Cho, Dae Seung

Determining environmental pollution from ships using Index of Energy Efficiency and Environmental Eligibility (I4E) // Marine policy, 95 (2018), 1-7 doi:10.1016/j.marpol.2018.06.019 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

900.

Alar, Željko; Mandić, Davor

Comparasion of Impact and Tensile Properties of High-Strength Steel // Metals, 8 (2018), 511; 1-7 doi:10.3390/met8070511 (međunarodna recenzija, članak, znanstveni)

doi www.mdpi.com

901.

Majdandžić, Ljubomir; Buljić, Dalibor; Buljac, Andrija; Kozmar, Hrvoje

Aerodynamic design of a solar road vehicle // International journal of automotive technology, 19 (2018), 6; 949-957 doi:10.1007/s12239−018−0092−2 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada doi ijat.ksae.org

902.

Araújo, M.S.B.; Fernandes, C.; Ferrás, L.L.; Tuković, Ž.; Jasak, H.; Nóbrega, J.M.

A stable numerical implementation of integral viscoelastic models in the OpenFOAM ® computational library // Computers & Fluids, 172 (2018), 728-740 doi:10.1016/j.compfluid.2018.01.004 (međunarodna recenzija, članak, znanstveni)

doi

903.

Ćorak, Maro; Parunov, Joško; Guedes Soares, Carlos

Structural Reliability Analysis of Container Ships under Combined Wave and Whipping Loads // Journal of ship research, 62 (2018), 3; 115-133 doi:10.5957/JOSR.170013 (međunarodna recenzija, članak, znanstveni)

doi www.ingentaconnect.com

904.

Šuligoj, Filip; Jerbić, Bojan; Šekoranja, Bojan; Vidaković, Josip; Švaco, Marko

Influence of the Localization Strategy on the Accuracy of a Neurosurgical Robot System // Transactions of FAMENA, 42 (2018), 2; 27-38 doi:10.21278/tof.42203 (međunarodna recenzija, članak, znanstveni)

doi hrcak.srce.hr

905.

Hadžić, Neven

Analytical solution of the serial Bernoulli production line steady-state performance and its application in the shipbuilding process // International journal of production research, 56 (2018), 12; 1, 14 doi:10.1080/00207543.2018.1500042 (međunarodna recenzija, članak, znanstveni)

doi

906.

Esih, Ivan; Stojanović, Ivan; Šimunović, Vinko; Alar, Vesna

Korozija pocinčanih cijevi izloženih vodi // Zavarivanje, 61 (2018), 1/2; 15-19 (domaća recenzija, prethodno priopćenje, znanstveni)

907.

Wang, Fei; Li, Kangping; Duić, Neven; Mi, Zegqiang; Hodge, Bri-Mathias, Shafie-khak, Miadreza; Catalão, Joãoa

Association rule mining based quantitative analysis approach of household characteristics impacts on residential electricity consumption patterns // Energy conversion and management, 171 (2018), 839-854 doi:10.1016/j.enconman.2018.06.017 (međunarodna recenzija, članak, znanstveni)

doi

908.

Vučković, Krešimir; Galić, Ivica; Božić, Željko; Glodež, Srečko

Effect of friction in a single-tooth fatigue test // International journal of fatigue, 114 (2018), 148-158 doi:10.1016/j.ijfatigue.2018.05.005 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

Pregled po ustanovi: Fakultet strojarstva i brodogradnje, Zagreb (MB: 120)

Radovi u časopisima

Znanstveni i pregledni radovi