Pregled po ustanovi: Fakultet strojarstva i brodogradnje, Zagreb (MB: 120)

1909.

Bauer, Branko; Kralj, Slobodan; Kožuh, Zoran; Dorn, Lutz

Effects of type of shielding gas upon local mechanical properties of laser welded joint in heat-treatable steel // Materialwissenschaft und Werkstofftechnik, 42 (2011), 8; 718-726 doi:10.1002/mawe.201100774 (međunarodna recenzija, članak, znanstveni)

doi onlinelibrary.wiley.com

1910.

Muftić, Osman; Jurčević Lulić, Tanja; Godan, Bruno

Harmonijska raspodjela mase dijelova ljudskog tijela // Sigurnost : časopis za sigurnost u radnoj i životnoj okolini, 53 (2011), 1; 1-9 (međunarodna recenzija, članak, znanstveni)

1911.

Stipančić, Tomislav; Jerbić, Bojan; Ćurković, Petar

A Bayesian approach to robot group control // Computer technology and application, 2 (2011), 9; 716-723 doi:10.17265/1934-7332/2011.09.007 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada doi www.davidpublisher.org

1912.

P. Otal, I. Morgado, D. Steindl, N. Medina Martín, A. Lefkopoulos, A. Altintas, L. Grgec Bermanec, S. Bursic, J. Setina, M. Bergoglio, I. Spohr, C. Wüthrich, M. Rantanen, C. Vámossy1, W. Sabuga, I. Koçaş

Evaluation of crossfloat measurements with pressure balances – Results of EURAMET project 1125 // PTB Mitteilungen, 3 (2011), 294-297 (međunarodna recenzija, članak, znanstveni)

www.ptb.de

1913.

Majić, Frane; Virag, Zdravko

Viscous-Inviscid Interaction Method for Steady Transonic Flow // Transactions of FAMENA, 35 (2011), 2; 35-48 (međunarodna recenzija, članak, znanstveni)

1914.

Bojkovski, Jovan; Veliki, Tomislav; Drnovšek, Janko; Zvizdić, Davor

Bilateral Comparison of Mercury and Gallium Fixed-Point Cells Using Standard Platinum Resistance Thermometer // International journal of thermophysics, 32 (2011), 7; 1544-1552 doi:10.1007/s10765-011-1035-6 (međunarodna recenzija, članak, znanstveni)

doi www.springerlink.com

1915.

Markučič, Damir; Mihaljević, Morana; Guliš, Matija

Simulation of Ultrasonic Pulse Propagation Through Multiple Curved Boundaries // Transactions of FAMENA, 35 (2011), 3; 1-12 (međunarodna recenzija, članak, znanstveni)

1916.

Keran, Zdenka; Math, Miljenko; Škunca, Marko

Determination of Flow stress Curve by Modified Hydraulic Bulging // Transactions of FAMENA, 35 (2011), 3; 13-26 (međunarodna recenzija, članak, znanstveni)

1917.

Garašić, Ivica; Kralj, Slobodan; Kožuh, Zoran

Suvremeni postupci MIG/MAG zavarivanja // Zavarivanje, 54 (2011), 61-67 (podatak o recenziji nije dostupan, pregledni rad, znanstveni)

1918.

Ćurković, Lidija; Rede, Vera; Lalić, Marijo

Statistical analysis of fracture toughness of sic ceramics determined by Vickers indentation method // International journal of microstructure and materials properties, 6 (2011), 5; 359-365 doi:10.1504/IJMMP.2011.043572 (podatak o recenziji nije dostupan, članak, znanstveni)

doi www.inderscienceonline.com doi.org

1919.

Senjanović, Ivo; Hadžić, Neven; Vladimir, Nikola

Restoring stiffness in the hydroelastic analysis of marine structures // Brodogradnja, 62 (2011), 3; 265-279 (međunarodna recenzija, pregledni rad, znanstveni)

Pristup cjelovitom tekstu rada

1920.

Drača, Nataša; Tikvica, Ana; Eljuga, Domagoj; Semenski, Damir; Brnčić, Mladen; Vukičević, Slobodan

Biomechanical Properties of Bones from Rats Treated with Sevelamer // Collegium Antropologicum, 35 (2011), 2; 557-563 (međunarodna recenzija, članak, znanstveni)

www.collantropol.hr

1921.

Alar, Vesna; Esih, Ivan; Budić, Ivan

Effects of Thermal Oxidation and Subsequent Pickling on Pitting Geometry of Austenitic Stainless Steels in Chloride Solutions // Materials testing (Materialprufung), 53 (2011), 634-638 (međunarodna recenzija, članak, znanstveni)

1922.

Gayeski, Nicholas Thomas; Žakula, Tea; Armstrong, Peter Ross; Norford, Leslie Keith

Empirical Modeling of a Rolling-Piston Compressor Heat Pump for Predictive Control in Low-Lift Cooling // ASHRAE transactions, 117 (2011), 2; ML11-023-01-ML11-023-11 (podatak o recenziji nije dostupan, članak, znanstveni)

1923.

Žakula, Tea; Gayeski, Nicholas Thomas; Armstrong, Peter Ross; Norford, Leslie Kieth

Variable-speed heat pump model for a wide range of cooling conditions and loads // Hvac&r research, 17 (2011), 5; 670-691 doi:10.1080/10789669.2011.607745 (međunarodna recenzija, članak, znanstveni)

doi www.tandfonline.com

1924.

Osman, Krešimir; Štorga, Mario; Stanković, Tino; Marjanović, Dorian

Behaviour Prediction Framework in System Architecture Development // Applied Mechanics and Materials, 104 (2011), 3; 3-12 doi:10.4028/www.scientific.net/AMM.104.3 (podatak o recenziji nije dostupan, članak, znanstveni)

doi www.scientific.net www.scientific.net

1925.

Šitum, Željko

Force and positon control of a hydraulic press // VENTIL - revija za fluidno tehniko, avtomatizacijo in mehatroniko - Journal for Fluid Power, Automation and Mechatronics, 17 (2011), 4; 314-320 (podatak o recenziji nije dostupan, članak, znanstveni)

1926.

Stipančić, Tomislav; Jerbić, Bojan; Ćurković, Petar

Probabilistic Approach to Robot Group Control // Advanced Materials Research, 317-319 (2011), 742-749 doi:10.4028/www.scientific.net/AMR.317-319.742 (međunarodna recenzija, članak, znanstveni)

doi

1927.

Ivančević, Darko; Smojver, Ivica

Hybrid approach in bird strike damage prediction on aeronautical composite structures // Composite structures, 94 (2011), 1; 15-23 doi:10.1016/j.compstruct.2011.07.028 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com ac.els-cdn.com dx.doi.org

1928.

Baršić, Gorana; Mahović Sanjin; Picotto, Gian, Bartolo; Amer, Mohamed; Runje, Biserka

Groove depth measurements on roughness reference standards of the Croatian National Laboratory for Length (LFSB) // Measurement science & technology, 22 (2011), 210-219 doi:10.1088/0957-0233/22/9/094020 (međunarodna recenzija, članak, znanstveni)

doi iopscience.iop.org iopscience.iop.org

1929.

Jokić, Marko; Stegić, Milenko; Butković, Mirko

Reduced-order multiple tuned mass damper optimization: A bounded real lemma for descriptor systems approach // Journal of sound and vibration, 330 (2011), 22; 5259-5268 doi:10.1016/j.jsv.2011.06.005 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com ac.els-cdn.com dx.doi.org

1930.

Jakopčić, Mirko; Grilec, Krešimir

Influence of artillery weapon barrel superheat on abrasion wear resistance of material // Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 18 (2011), 2; 173-177 (međunarodna recenzija, članak, znanstveni)

1931.

Kurajica, Stanislav; Tkalčec, Emilija; Matijašić, Gordana; Ćurković, Lidija; Schauperl, Zdravko; Šipušić, Juraj; Mandić, Vilko

Influence of agglomeration and contamination in the course of amorphous powder grinding on structure and microstructure of sintered mullite // Croatica chemica acta, 84 (2011), 1; 63-71 doi:10.5562/cca1662 (međunarodna recenzija, članak, znanstveni)

doi

1932.

Hrgetić, Mario; Deur, Joško; Pavković, Danijel; Barber Phil

Adaptive EKF-Based Estimator of Sideslip Angle Using Fusion of Inertial Sensors and GPS // SAE International journal of passenger cars. Mechanical systems, 4 (2011), 1; 700-712 doi:10.4271/2011-01-0953 (međunarodna recenzija, članak, znanstveni)

doi

1933.

García-Camprubí, M.; Jasak, Hrvoje; Fueyo, N.

CFD analysis of cooling effects in H2-fed solid oxide fuel cells // Journal of power sources, 196 (2011), 17; 7290-7301 doi:10.1016/j.jpowsour.2011.04.037 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com ac.els-cdn.com dx.doi.org

1934.

Parunov, Joško; Ćorak, Maro; Pensa, Marina

Wave height statistics for seakeeping assessment of ships in the Adriatic Sea // Ocean engineering, 38 (2011), 11/12; 1323-1330 doi:10.1016/j.oceaneng.2011.06.001 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com ac.els-cdn.com dx.doi.org

1935.

Ćosić, Boris; Markovska, Natasa; Taseska, Verica; Krajačić, Goran; Duić, Neven

The Potential of GHG Emissions Reduction in Macedonia by Renewable Electricity // Chemical Engineering transactions, 25 (2011), 57-62 doi:10.3303/CET1125010 (međunarodna recenzija, članak, znanstveni)

doi www.aidic.it

1936.

Pilipović, Ana; Raos, Pero; Šercer, Mladen

Experimental testing of quality of polymer parts produced by Laminated Object Manufacturing – LOM // Tehnički vjesnik, 18 (2011), 2; 253-260 (podatak o recenziji nije dostupan, prethodno priopćenje, znanstveni)

1937.

Mićić, Jadranka; Pavić, Zlatko; Pečarić, Josip

Extension of Jensen's inequality for operators without operator convexity // Abstract and Applied Analysis, 2011 (2011), 358981-1 doi:10.1155/2011/358981 (međunarodna recenzija, članak, znanstveni)

doi www.hindawi.com dx.doi.org

1938.

Raos, Pero; Tonković, Zlatko; Šercer, Mladen

Analysis and Prediction of Remaining Life Time of Damaged Polyethylene Gas Pipes // KGK. Kautschuk, Gummi, Kunststoffe, 64 (2011), 6; 33-39 (međunarodna recenzija, članak, znanstveni)

1939.

Krajačić, Goran; Duić, Neven; Zmijarević, Zlatko; Vad Mathiesen, Brian; Anić Vučinić, Aleksandra; Carvalho, Maria Da Graça

Planning for a 100% independent energy system based on smart energy storage for integration of renewables and CO2 emissions reduction // Applied thermal engineering, 31 (2011), 13; 2073-2083 doi:10.1016/j.applthermaleng.2011.03.014 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com ac.els-cdn.com dx.doi.org

1940.

Mićić, Jadranka; Pavić, Zlatko; Pečarić, Josip

Order among power operator means with condition on spectra // Mathematical Inequalities & Applications, 14 (2011), 3; 709-716 (međunarodna recenzija, članak, znanstveni)

1941.

Mićić, Jadranka; Pavić, Zlatko; Pečarić, Josip

Jensen type inequalities on quasi-arithmetic operator means // Scientiae Mathematicae Japonicae, 73 (2011), 2-3; 103-112 (podatak o recenziji nije dostupan, članak, znanstveni)

www.jams.or.jp

1942.

Markučič, Damir; Runje, Biserka; Stepanić, Josip

Assesment of Uncertainty in Modelled Ultrasonic Thickness Measurements // Materialprufung, 53 (2011), 4; 233-237 doi:10.3139/120.110221 (međunarodna recenzija, članak, znanstveni)

doi www.hanser-elibrary.com

1943.

Vuković, Danijel; Matijašević, Dubravko; Vrdoljak, Milan

Analysis of supersonic flow in Oswatitsch inlet configuration // PAMM : Proceedings in applied mathematics and mechanics, 11 (2011), 1; 673-674 doi:10.1002/pamm.201110326 (podatak o recenziji nije dostupan, članak, znanstveni)

doi onlinelibrary.wiley.com www.wiley-vch.de onlinelibrary.wiley.com

1944.

Krizmanić, Severino; Veliki, Tomislav; Zvizdić, Davor

Modeling of Transient Heat Transfer in Zinc Fixed-Point Cell // International journal of thermophysics, 32 (2011), 1; 326-336 doi:10.1007/s10765-010-0908-4 (međunarodna recenzija, članak, znanstveni)

doi www.springerlink.com

1945.

Pukšec, Tomislav; Duić, Neven

Geographic distribution and economic potential of biogas from Croatian farming sector // Chemical Engineering transactions, 25 (2011), 899-904 doi:10.3303/CET1125150 (međunarodna recenzija, članak, znanstveni)

doi

1946.

Alujević, Neven; Wolf, Hinko; Gardonio, Paolo; Tomac, Ivan

Stability and performance limits for active vibration isolation using blended velocity feedback // Journal of sound and vibration, 330 (2011), 21; 4981-4997 doi:10.1016/j.jsv.2011.05.020 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com pdn.sciencedirect.com dx.doi.org

1947.

Pedišić, Ljiljana; Ćurković, Lidija; Matijašić, Gordana; Sladojević, Milan

Characterization of the cooling liquid after the machining of Si and SiO2 // Transactions of FAMENA, 35 (2011), 1; 75-82 (međunarodna recenzija, članak, znanstveni)

1948.

Čanžar, Predrag; Tonković, Zdenko; Bakić, Ante; Kodvanj, Janoš

Experimental and Numerical Investigation of Fatigue Behaviour of Nodular Cast Iron // Key engineering materials, 488-489 (2011), 182-185 doi:10.4028/www.scientific.net/KEM.488-489.182 (međunarodna recenzija, članak, znanstveni)

doi www.scientific.net

1949.

Grilec, Krešimir; Ćurković, Lidija; Kumić, Ivan; Baršić, Gorana

Erosion mechanisms of aluminium nitride ceramics at different impact angles // Materialwissenschaft und Werkstofftechnik, 42 (2011), 8; 712-717 doi:10.1002/mawe.201100773 (međunarodna recenzija, članak, znanstveni)

doi onlinelibrary.wiley.com

1950.

Kozmar, Hrvoje

An alternative approach to experimental simulation of wind characteristics in urban environments // Procedia environmental sciences, 4 (2011), 43-50 doi:10.1016/j.proenv.2011.03.006 (podatak o recenziji nije dostupan, članak, znanstveni)

doi www.sciencedirect.com

1951.

Senjanović, Ivo; Vladimir, Nikola; Tomić, Marko

Investigation of torsion, warping and distortion of large container ships // Ocean systems engineering, 1 (2011), 1; 73-93 (podatak o recenziji nije dostupan, članak, znanstveni)

1952.

Senjanović, Ivo; Vladimir, Nikola; Tomić, Marko

Effective stiffness of the engine room structure in large container ships // Brodogradnja, 62 (2011), 1; 15-27 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada

1953.

Senjanović, Ivo; Hadžić, Neven; Tomić, Marko

Investigation of restoring stiffness in the hydroelastic analysis of slender marine structures // Journal of Offshore Mechanics and Arctic Engineering, 133 (2011), 3; 1-10 doi:10.1115/1.4001961 (međunarodna recenzija, članak, znanstveni)

doi ovidsp.tx.ovid.com

1954.

Galović, Antun; Živić, Marija; Krizmanić, Severino

Entropy analysis of adiabatic mixing of three streams of different ideal gases at equal pressures and temperatures // International journal of exergy, 8 (2011), 3; 325-332 doi:10.1504/IJEX.2011.039794 (međunarodna recenzija, članak, znanstveni)

doi http

1955.

Glogović, Zlatko; Alar, Vesna; Kožuh, Zoran; Stojanović, Ivan; Kralj, Slobodan

Corrosion properties of thermal sprayed aluminium (TSA) coatings deposited by powder flame spraying // Materialwissenschaft und Werkstofftechnik, 42 (2011), 3; 224-228 doi:10.1002/mawe.201100718 (međunarodna recenzija, članak, znanstveni)

doi onlinelibrary.wiley.com

1956.

Virag, Zdravko; Živić, Marija; Krizmanić, Severino

Cooling of a sphere by natural convection – the applicability of the lumped capacitance method // International journal of heat and mass transfer, 54 (2011), 11/12; 2303-2309 doi:10.1016/j.ijheatmasstransfer.2011.02.034 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com pdn.sciencedirect.com dx.doi.org

1957.

Ćurković, Lidija; Rastovčan-Mioč, Alenka; Majić Renjo, Marijana; Župan, Josip

Application of different isotherm models on lead ions sorption onto electric furnace slag // The holistic approach to environment, 1 (2011), 1; 13-18 (podatak o recenziji nije dostupan, članak, znanstveni)

1958.

Đukić, Ankica; Firak, Mihajlo

Hydrogen production using alkaline electrolyzer and photovoltaic (PV) module // International journal of hydrogen energy, 36 (2011), 13; 7799-7806 doi:10.1016/j.ijhydene.2011.01.180 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com pdn.sciencedirect.com dx.doi.org

1959.

Kozmar, Hrvoje

Characteristics of natural wind simulations in the TUM boundary layer wind tunnel // Theoretical and applied climatology, 106 (2011), 1/2; 95-104 doi:10.1007/s00704-011-0417-9 (međunarodna recenzija, članak, znanstveni)

doi www.springerlink.com

1960.

Majić, Marijana; Ćurković, Lidija; Ćorić, Danko

Load dependence of the apparent Knoop hardness of SiC ceramics in a wide range of loads // Materialwissenschaft und Werkstofftechnik, 42 (2011), 3; 234-238 doi:10.1002/mawe.201100754 (međunarodna recenzija, članak, znanstveni)

doi onlinelibrary.wiley.com

1961.

Ivanović, Vladimir; Deur, Joško; Herold, Zvonko; Hancock, Matthew; Assadian, Francis

Modelling of electromechanically actuated active differential wet-clutch dynamics // Proceedings of the Institution of Mechanical Engineers. Part D : Journal of Automobile Engineering, 226 (2011), 4; 433-456 doi:10.1177/0954407011423131 (međunarodna recenzija, članak, znanstveni)

doi pid.sagepub.com

1962.

Filetin, Tomislav; Šolić, Sanja; Žmak, Irena

The indentation size effect on the microhardness of sea mollusc shell structures // Materialprufung, 1-2 (2011), 48-53 doi:10.3139/120.110201 (međunarodna recenzija, članak, znanstveni)

doi www.hanser-elibrary.com

1963.

Schneider, Daniel Rolph; Bogdan, Željko

Analysis of a sustainable system for energy recovery from municipal waste in Croatia // Management of Environmental Quality: An International Journal, 22 (2011), 1; 105-120 (međunarodna recenzija, članak, znanstveni)

1964.

Mićić, Jadranka; Pavić, Zlatko; Pečarić, Josip

Jensen’s inequality for operators without operator convexity // Linear algebra and its applications, 434 (2011), 5; 1228-1237 doi:10.1016/j.laa.2010.11.004 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com www.sciencedirect.com dx.doi.org

1965.

Krajačić, Goran; Duić, Neven; Tsikalakis, Antonis; Zoulias, Manos; Caralis, George; Panteri, Eirini; Carvalho, Maria Graça

Feed-in tariffs for promotion of energy storage technologies // Energy policy, 39 (2011), 3; 1410-1425 doi:10.1016/j.enpol.2010.12.013 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com www.sciencedirect.com

1966.

Ćosić, Boris; Stanić, Zoran; Duić, Neven

Geographic distribution of economic potential of agricultural and forest biomass residual for energy use : Case study Croatia // Energy (Oxford), 36 (2011), 4; 2017-2028 doi::10.1016/j.energy.2010.10.009 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

1967.

Kozmar, Hrvoje

Wind-tunnel simulations of the suburban ABL and comparison with international standards // Wind and structures, 14 (2011), 1; 15-34 (međunarodna recenzija, članak, znanstveni)

technopress.kaist.ac.kr

1968.

Kozmar, Hrvoje

Truncated vortex generators for part-depth wind-tunnel simulations of the atmospheric boundary layer flow // Journal of wind engineering and industrial aerodynamics, 99 (2011), 2/3; 130-136 doi:10.1016/j.jweia.2010.11.001 (međunarodna recenzija, kratko priopcenje, znanstveni)

doi www.sciencedirect.com dx.doi.org

1969.

Smojver, Ivica; Ivančević, Darko

Bird Strike Damage Analysis in Aircraft Structures Using Abaqus/Explicit and Coupled Eulerian Lagrangian Approach // Composites science and technology, 71 (2011), 4; 489-498 doi:10.1016/j.compscitech.2010.12.024 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com www.sciencedirect.com

1970.

Mikulić, Dinko; Stojković, Vjekoslav; Grgar, Marko

Smanjenje prometnih nesreća primjenom aktivnih sustava sigurnosti vozila // Suvremeni promet : časopis za pitanja teorije i prakse prometa, 31 (2011), 3-4; 223-227 (međunarodna recenzija, članak, znanstveni)

1971.

Pavković, Danijel; Deur, Joško; Lisac, Anton

A Torque Estimator-based Control Strategy for Oil-Well Drill-String Torsional Vibrations Active Damping Including an Auto-Tuning Algorithm // Control engineering practice, 19 (2011), 8; 836-850 doi:10.1016/j.conengprac.2011.04.012 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com www.sciencedirect.com

1972.

Segurado, Raquel; Krajačić, Goran; Duić, Neven; Alves, Luis Manuel;

Increasing the penetration of renewable energy resources in S. Vicente, Cape Verde // Applied energy, 88 (2011), 2; 466-472 doi:10.1016/j.apenergy.2010.07.005 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com www.sciencedirect.com

1973.

Krajačić, Goran; Duić, Neven; Carvalho, Maria da Graça;

How to achieve a 100% RES electricity supply for Portugal? // Applied energy, 88 (2011), 2; 508-517 doi:10.1016/j.apenergy.2010.09.006 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com www.sciencedirect.com

1974.

Šegota, Suzana; Ćurković, Lidija; Ljubas, Davor; Svetličić, Vesna; Fiamengo Houra, Ivona; Tomašić, Nenad

Synthesis, characterization and photocatalytic properties of sol-gel TiO2 films // Ceramics international, 37 (2011), 4; 1153-1160 doi:10.1016/j.ceramint.2010.10.034 (međunarodna recenzija, članak, znanstveni)

doi dx.doi.org www.sciencedirect.com

1975.

Pustaić, Dragan; Cajner, Franjo

Influence of Hardening and Tempering vs. Austempering on Mechanical and Fracture Properties of 65Si7 Steel // Key engineering materials, 465 (2011), 346-349 doi:10.4028/www.scientific.net/KEM.465.346 (međunarodna recenzija, članak, znanstveni)

doi www.scientific.net

1976.

Juretić, Hrvoje; Dobrović, Slaven; Ružinski, Nikola; Lovrić, Josip; Pećarević, Marijana; Mikuš, Josip; Crnčević, Marija; Marčelja, Esme-Johanna; Marijanović Rajčić, Marija; Širac, Siniša et al.

Pilot Studies of Ozonation for Inactivation of Artemia salina Nauplii in Ballast Water // Ozone: science & engineering, 33 (2011), 1; 3-13 doi:10.1080/01919512.2011.536501 (međunarodna recenzija, članak, znanstveni)

doi www.tandfonline.com www.informaworld.com

1977.

Ćurković, Lidija; Kumić, Ivan; Grilec, Krešimir

Solid particle erosion behaviour of high purity alumina ceramics // Ceramics international, 37 (2011), 1; 29-35 doi:10.1016/j.ceramint.2010.08.029 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com www.sciencedirect.com

1978.

Kasać, Josip; Novaković, Branko; Milić, Vladimir

On Equivalence Between Internal and External Model-Based Repetitive Learning Controllers for Nonlinear Passive Systems // Asian Journal of Control, 13 (2011), 1; 15-24 doi:10.1002/asjc.273 (međunarodna recenzija, članak, znanstveni)

doi onlinelibrary.wiley.com

1979.

Ivanović, Vladimir; Deur, Joško; Kostelac, Milan; Pentek, Tibor; Hrovat, Davor

Tire Friction Behavior Under Abrupt Wheel Torque Transients on Slippery Road Surfaces : Experimental Analysis and Modeling // Vehicle system dynamics, 49 (2011), 10; 1623-1647 doi:10.1080/00423114.2010.528778 (međunarodna recenzija, članak, znanstveni)

doi dx.doi.org www.tandfonline.com

1980.

Kasać, Josip; Deur, Joško; Novaković Branko; Kolmanovsky, Ilya; Assadian, Francis

A Conjugate Gradient-Based BPTT-like Optimal Control Algorithm with Vehicle Dynamics Control Application // IEEE Transactions on Control Systems Technology, 19 (2011), 6; 1587-1595 doi:10.1109/TCST.2010.2084088 (međunarodna recenzija, članak, znanstveni)

doi ieeexplore.ieee.org

1981.

Deur, Joško; Pavković, Danijel; Burgio, Gilberto; Hrovat, Davor

A Model-Based Traction Control Strategy Non-Reliant On Wheel Slip Information // Vehicle system dynamics, 49 (2011), 8; 1245-1265 doi:10.1080/00423114.2010.511675 (međunarodna recenzija, članak, znanstveni)

doi

1982.

Knežević, Predrag; Grgurević, Lovro; Uglešić, Vedran; Grgurević, Jakša; Drvar, Nenad; Kodvanj, Janoš

Maxillary fragment stabilisation after Le Fort I fracture with one screw per fragment // Journal of oral and maxillofacial surgery, 69 (2011), 4; 1166-1174 doi:10.1016/j.joms.2010.02.049 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com ac.els-cdn.com dx.doi.org

1983.

Galić, Ivica; Tonković, Zdenko; Vučković, Krešimir

Experimental and numerical investigation of collapse and burst pressures for a valve housing // Strain, 47 (2011), s1; e519-e524 doi:10.1111/j.1475-1305.2009.00648.x (međunarodna recenzija, članak, znanstveni)

doi onlinelibrary.wiley.com

1984.

Soldo, Vladimir; Ruševljan Miroslav

Dizalica topline s toplinskom sondom dubine 100 m // Građenje i opremanje, 24 (2010), 31-35 (podatak o recenziji nije dostupan, pregledni rad, stručni)

issuu.com

1985.

Malinovec Puček, Marina; Soldo, Vladimir

Pregled normi u ventilaciji i klimatizaciji // EGE : energetika, gospodarstvo, ekologija, etika, 1 (2010), 79-83 (podatak o recenziji nije dostupan, pregledni rad, stručni)

1986.

Tovazhnyansky, Leonid; Kapustenko, Petro; Ulyev, Leonid; Boldyryev, Stanislav; Arsenyeva, Olga

Process integration of sodium hypophosphite production // Applied thermal engineering, 30 (2010), 16; 2306-2314 doi:10.1016/j.applthermaleng.2010.04.021 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

1987.

Rujnić-Sokele, Maja; Šercer, mladen; Godec, Damir

Process capability analysis in the manufacturing of PET bottles // International Journal of Material Forming, 3 (2010), Suppl 1.; 531-534 doi:10.1007/s12289-010-0824-y (međunarodna recenzija, članak, znanstveni)

doi

1988.

Matus, Michael; Nyholm, Kaj; Madej, Alan A; Bernard, John E; Walczuk, Jerzy; Crepinšek Lipuš, Lucija; Castillo M, Héctor A; Vega, Rene Pichardo; Bastida, Karina Beatriz; Mingolla, María Griselda et al.

Final report for the period 2007–2009 on the CCL-K11 ongoing key comparison // Metrologia, 47 (2010), Techn.Suppl.; 04009-1 doi:10.1088/0026-1394/47/1A/04009 (međunarodna recenzija, članak, znanstveni)

doi iopscience.iop.org www.bipm.org

1989.

Mannini, Claudio; Šoda, Ante; Voss, Ralph; Schewe, Guenter

Unsteady RANS simulations of flow around a bridge section // Journal of wind engineering and industrial aerodynamics, 98 (2010), 12; 742-753 doi:10.1016/j.jweia.2010.06.010 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com dx.doi.org

1990.

Mannini, Claudio; Šoda, Ante; Schewe, Guenter

Unsteady RANS modelling of flow past a rectangular cylinder : investigation of Reynolds number effects // Computers & fluids, 39 (2010), 9; 1609-1624 doi:10.1016/j.compfluid.2010.05.014 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com dx.doi.org

1991.

Parunov, Joško; Senjanović, Ivo; Guedes SOares, C.

Case studies of structural reliability of oil tankers // Rad Hrvatske akademije znanosti i umjetnosti. Tehničke znanosti, 506 (2010), 14; 59-80 (podatak o recenziji nije dostupan, članak, znanstveni)

1992.

Guzović, Zvonimir; Lončar, Dražen; Ferdelji, Nenad

Possibilities of electricity generation in the Republic of Croatia by means of geothermal energy // Energy (Oxford), 35 (2010), 8; 3429-3440 doi:10.1016/j.energy.2010.04.036 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada doi www.sciencedirect.com ac.els-cdn.com dx.doi.org

1993.

Šverko, Davor; Šestan, Ante

Experimental Determination of Stern Tube Journal Bearing Behavior // Brodogradnja, 61 (2010), 2; 130-141 (međunarodna recenzija, članak, znanstveni)

1994.

Mance, Ines; Hren, Smiljan; Labudović, Ivica; Bauer, Branko

Usporedba svojstava centrifugalno lijevanih bronci CuSn12 i CuSn12Pb // Ljevarstvo : glasilo Hrvatskog udruženja za ljevarstvo, 52 (2010), 2; 51-59 (podatak o recenziji nije dostupan, članak, znanstveni)

1995.

Bišćan, Davor; Lončar, Dražen

Optimization of waste heat utilization in pipeline compressor station // Strojarstvo, 52 (2010), 4; 475-487 (podatak o recenziji nije dostupan, prethodno priopćenje, znanstveni)

1996.

Rigo, Philipe; Ehlers, Soren; Žanić, Vedran; Andrić, Jerolim

Design of Innovative Ship Concepts Using an Integrated Decision Support System for Ship Production and Operation // Brodogradnja, 61 (2010), 4; 367-381 (međunarodna recenzija, članak, znanstveni)

1997.

Lončar, Dražen; Ban, Marko; Horvat, Kristijan

Mathematical Model and Simulation of the Dynamics of the Low Density Polyethylen Polymerization process in the Tubular Reactor // Strojarstvo, 52 (2010), 3; 315-325 (međunarodna recenzija, članak, znanstveni)

1998.

Ban, Marko; Duić, Neven

Adaptation of N-heptane Autoignition Tabulation for Complex Chemistry Mechanisms // Thermal science, 15 (2010), 1; 135-144 doi:10.2298/TSCI100514077B (međunarodna recenzija, članak, znanstveni)

doi

1999.

Čatić, Igor; Rujnić-Sokele, Maja; Karavanić, Ivor

Globalisation of stone tools and beginnings of mechanical processing of polymers // Interdisciplinary description of complex systems, 8 (2010), 2; 59-69 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada hrcak.srce.hr indecs.eu

2000.

Dubreta, Nikša; Janković, Vesna; Trbušić, Helena

Modelling a Pattern for Responsibility : Science and Theory of Sustainable Development // Strojarstvo, 52 (2010), 1; 17-22 (međunarodna recenzija, članak, znanstveni)

2001.

Božić, Željko; Bitunjac, Vedran; Semenski, Damir

Interaction modelling of multiple fatigue cracks in stiffened panels // Transactions of FAMENA, 34 (2010), 4; 11-18 (međunarodna recenzija, članak, znanstveni)

famena.fsb.hr

2002.

Cajner, Franjo; Landek, Darko; Rafael, Hrvoje

Using salt bath nitrocarburizing with post-oxidation for achieving better properties of steel parts // Journal of Engineering and Technology, 1 (2010), 1; 1-9 (podatak o recenziji nije dostupan, članak, znanstveni)

2003.

Kovačec, Miroslav; Pilipović, Ana; Štefanić, Nedeljko

Improving the quality of glass containers production with plunger process control // CIRP journal of manufacturing science and technology, 3 (2010), 4; 304-310 (međunarodna recenzija, članak, znanstveni)

www.sciencedirect.com

2004.

Faveroa, Jovani L.; Cardozoa, Nilo S.M.; Secchib, Argimiro R.; Jasak, Hrvoje

Viscoelastic flow analysis using the software OpenFOAM and differential constitutive equations // Journal of non-newtonian fluid mechanics, 165 (2010), 23/24; 1625-1636 doi:10.1016/j.jnnfm.2010.08.010 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com ac.els-cdn.com dx.doi.org

2005.

Faveroa, Jovani L.; Cardozoa, Nilo S.M.; Secchib, Argimiro R.; Jasak, Hrvoje

Viscoelastic fluid analysis in internal and in free surface flows using the software OpenFOAM // Computers & chemical engineering, 34 (2010), 12; 1984-1993 doi:10.1016/j.compchemeng.2010.07.010 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com ac.els-cdn.com dx.doi.org

2006.

Anić-Vučinić, Aleksandra; Vouk, Dražen; Zebić, Maja

Structural Measures to Improve the Efficiency of Biological Wastewater Treatment Plants // Strojarstvo : časopis za teoriju i praksu u strojarstvu, 52 (2010), 3; 333-342 (podatak o recenziji nije dostupan, prethodno priopćenje, znanstveni)

2007.

Smojver, Ivica; Ivančević, Darko; Mihaljević, Dario

An Explicit Numerical Modeling of Soft Body Impact Damage in Metallic Airplane Structures // Computer modeling in engineering & sciences, 70 (2010), 2; 191-216 doi:10.3970/cmes.2010.070.191 (međunarodna recenzija, članak, znanstveni)

doi www.techscience.com

2008.

Smoljan, Darko; Balen, Igor

Influence of a plenum box design on uniformity of the radial air jet issuing from a vortex diffuser // Strojarstvo, 52 (2010), 3; 379-386 (međunarodna recenzija, članak, znanstveni)

2009.

Senjanović, Ivo; Vladimir, Nikola; Hadžić, Neven

Some aspects of geometric stiffness modelling in the hydroelastic analysis of ship structures // Transactions of FAMENA, 34 (2010), 4; 1-10 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada

2010.

Deur, Joško; Ivanović, Vladimir; Hancock, Matthew; Assadian, Francis

Modeling and Analysis of Active Differential Dynamics // Journal of dynamic systems, measurement, and control, 132 (2010), 6; 061501-1 doi:10.1115/1.4002482 (međunarodna recenzija, članak, znanstveni)

doi link.aip.org scitation.aip.org

2011.

Schneider, Daniel Rolph; Lončar, Dražen; Bogdan, Željko

Cost Analysis of Waste-to-Energy Plant // Strojarstvo, 52 (2010), 3; 369-378 (međunarodna recenzija, pregledni rad, znanstveni)

2012.

Galović, Antun; Ferdelji, Nenad; Saša, Mudrinić

Izračunavanje specifične topline isparivanja vode korištenjem Clausius – Clayperonove jednadžbe // Strojarstvo, 52 (2010), 3; 343-348 (podatak o recenziji nije dostupan, prethodno priopćenje, znanstveni)

2013.

Opetuk, Tihomir; Žolo, Ivan; Đukić, Goran

Greening elements in the distribution network // Journal of industrial engineering and management, 3 (2010), 2; 353-369 (međunarodna recenzija, članak, znanstveni)

2014.

Đukić, Goran; Česnik, Vedran; Opetuk, Tihomir

Order-picking Methods and Technologies for Greener Warehousing // Strojarstvo, 52 (2010), 1; 23-31 (međunarodna recenzija, članak, znanstveni)

2015.

Galović, Antun; Ferdelji, Nenad; Mudrinić, Saša

Entropy generation and exergy efficiency in adiabatic mixing of nitrogen and oxygen streams of different temperatures and environmental pressures // Strojniški vestnik, 56 (2010), 12; 817-822 (međunarodna recenzija, članak, znanstveni)

2016.

Drvar, Nenad; Jecić, Stjepan; Gomerčić, Mladen

Flexible multi-camera optical surface digitization system // Strojarstvo, 52 (2010), 3; 283-302 (međunarodna recenzija, članak, znanstveni)

2017.

Segurado, Raquel; Alves, Luis Miguel; Duić, Neven; Krajačić, Goran

Integrated Energy and Water Planning on an Arid Island, Case of S. Vicente, Cape Verde // Jordan Journal of Mechanical and Industrial Engineering, 4 (2010), 1; 1-8 (podatak o recenziji nije dostupan, članak, znanstveni)

jjmie.hu.edu.jo jjmie.hu.edu.jo

2018.

Pukšec, Tomislav; Duić, Neven

Biogas Potential in Croatian Farming Sector // Strojarstvo, 52 (2010), 4; 441-448 (međunarodna recenzija, članak, znanstveni)

2019.

Krajačić, Goran; Duić, Neven; Mathiesen, Brian Vad; Carvalho, Maria Da Graça

Smart Energy Storages for Integration of Renewables in 100% Independent Energy Systems // Chemical Engineering transactions, 21 (2010), 391-396 doi:10.3303/CET1021066 (međunarodna recenzija, članak, znanstveni)

doi www.aidic.it

2020.

Čatić, Igor; Rujnić-Sokele, Maja; Karavanić, Ivor

Globalizacija prvih kamenih alata i obradba polimera // Polimeri : časopis za plastiku i gumu, 31 (2010), 1; 22-26 (međunarodna recenzija, pregledni rad, znanstveni)

www.fsb.hr

2021.

Čatić, Igor; Rujnić-Sokele, Maja; Dadić, Borislav

Energy or Information? // Synthesis philosophica, 25 (2010), 1; 173-180 (podatak o recenziji nije dostupan, prethodno priopćenje, znanstveni)

2022.

Čatić, Igor; Barić, Gordana; Cvjetičanin, Nenad; Galić, Kata; Godec, Damir; Grancarić, Ana Marija; Katavić, Ivan; Kovačić, Tonka; Raos, Pero; Rogić, Ana et al.

Polimeri - od prapočetka do plastike i elastomera // Polimeri, 31 (2010), 2; 59-70 (međunarodna recenzija, pregledni rad, znanstveni)

www.fsb.hr

2023.

Senjanović, Ivo; Vladimir, Nikola; Tomić, Marko

The contribution of the engine room structure to the hull stiffness of large container ships // International shipbuilding progress, 57 (2010), 1-2; 65-85 (međunarodna recenzija, članak, znanstveni)

2024.

Godec, Damir; Šercer, Mladen; Pilipović, Ana

Application of Rapid Prototyping in Polymer Product Development - Case Studies // Annals of DAAAM for 2010 & proceedings of the 21st International DAAAM Symposium, 21 (2010), 1; 211-212 (podatak o recenziji nije dostupan, članak, znanstveni)

2025.

Žiha, Kalman

Effects of Loading Fields on Marine Objects // Journal of Ship Production and Design, 26 (2010), 4; 252-264 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada

2026.

Kazagić, Anes; Smajević, Izet; Duić, Neven

SELECTION OF SUSTAINABLE TECHNOLOGIES FOR COMBUSTION OF BOSNIAN COALS // Thermal science, 14 (2010), 3; 715-727 doi:10.2298/TSCI1003715K (međunarodna recenzija, članak, znanstveni)

doi thermalscience.vinca.rs thermalscience.vinca.rs

2027.

Božić, Željko; Vujica, Danijel; Braut, Sanjin

Utjecaj sekundarnog savijanja na rast pukotina u orebrenim panelima // Engineering review, 30 (2010), 1; 13-21 (podatak o recenziji nije dostupan, članak, znanstveni)

2028.

Pilipović, Ana; Valentan, Bogdan; Brajlih, Tomaž; Haramina, Tatjana; Balič, Jože; Kodvanj, Janoš; Šercer, Mladen; Drstvenšek, Igor

Influence of laser sintering parameters on mechanical properties of polymer products // Annals of DAAAM for 2010 & proceedings of the 21st International DAAAM Symposium, 21 (2010), 1; 285-286 (podatak o recenziji nije dostupan, članak, znanstveni)

2029.

Garašić, Ivica; Ćorić, Anto; Kožuh, Zoran; Samardžić, Ivan

Occurence of cold cracks in welding of high-strength S960QL steel // Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 17 (2010), 3; 327-335 (podatak o recenziji nije dostupan, prethodno priopćenje, znanstveni)

2030.

Kožuh, Zoran; Glogović, Zlatko; Garašić, Ivica; Petrović, Vedran

Usporedba plinskog rezanja acetilenom i propan-butanom // Zavarivanje, 53 (2010), 73-81 (podatak o recenziji nije dostupan, prethodno priopćenje, znanstveni)

2031.

Pilipović, Ana; Šercer, Mladen; Kodvanj, Janoš

Influence of crosslinking parameters on mechanical properties of chloroprene rubber // Transactions of FAMENA, 34 (2010), 3; 57-70 doi:678.4:539.2 (međunarodna recenzija, članak, znanstveni)

doi

2032.

Alar, Vesna; Runje, Biserka; Baršić, Gorana

Influence of surface texture on electrochemical potential // Materialwissenschaft und Werkstofftechnik, 41 (2010), 10; 875-878 doi:10.1002/mawe.201000632 (međunarodna recenzija, pregledni rad, znanstveni)

doi onlinelibrary.wiley.com

2033.

Živić, Marija; Galović, Antun; Ferdelji, Nenad

Local entropy generation during steady heat conduction through a plane wall // Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 17 (2010), 3; 337-341 (međunarodna recenzija, članak, znanstveni)

2034.

Ćurković, Lidija; Rede, Vera; Grilec, Krešimir

Utjecaj opterećenja na tvrdoću silicijeve karbidne keramike // Kemija u industriji : časopis kemičara i tehnologa Hrvatske, 59 (2010), 10; 483-488 (međunarodna recenzija, članak, znanstveni)

2035.

Žmak, Irena; Filetin, Tomislav

Predicting Thermal Conductivity of Steels Using Artificial Neural Networks // Transactions of FAMENA, 34 (2010), 3; 11-20 (međunarodna recenzija, članak, znanstveni)

2036.

Barić, Emil; Džijan, Ivo; Kozmar, Hrvoje

Numerical simulation of wind characteristics in the wake of a rectangular building submitted to realistic boundary layer conditions // Transactions of FAMENA, 34 (2010), 3; 1-10 (međunarodna recenzija, članak, znanstveni)

2037.

Goniva, Christoph; Tuković, Željko; Feilmayr, Christoph; Pirker, Stefan

Towards efficient simulation of off-gas scrubbing by a hybrid Eulerian–Lagrangian model // Progress in computational fluid dynamics, 10 (2010), 5/6; 265-275 doi:10.1504/PCFD.2010.035359 (međunarodna recenzija, članak, znanstveni)

doi www.inderscience.com

2038.

Rezić, Iva; Ćurković, Lidija; Ujević, Magdalena

Study of microstructure and corrosion kinetic of steel guitar strings in artificial sweat solution // Materials and corrosion, 61 (2010), 6; 524-529 doi:10.1002/maco.200905368 (međunarodna recenzija, članak, znanstveni)

doi onlinelibrary.wiley.com onlinelibrary.wiley.com

2039.

Abrashi, Arijan; Štefanić, Nedjeljko; Lisjak, Dragutin

Solving JSSP by introducing Hamilton similarity and time dependent fitness scaling // Strojniški vestnik, 56 (2010), 5; 330-339 (međunarodna recenzija, članak, znanstveni)

2040.

Štefanić, Nedeljko; Tošanović, Nataša; Čala, Ivo

Applied Lean System in Process Industry // Strojarstvo, 52 (2010), 1; 59-67 (recenziran, pregledni rad, stručni)

2041.

Kozarac, Darko; Lulić, Zoran; Šagi, Goran

A six-zone simulation model for HCCI engines with a non-segregated solver of zone state // Combustion theory and modelling, 14 (2010), 3; 425-451 doi:10.1080/13647830.2010.489959 (međunarodna recenzija, članak, znanstveni)

doi www.informaworld.com

2042.

Ćorić, Danko; Aleksandrov Fabijanić, Tamara; Trstenjak, Siniša

Significance of Preload in the Testing Machine Calibration Procedure // Transactions of FAMENA, 34 (2010), 2; 59-70 (međunarodna recenzija, članak, znanstveni)

2043.

Pilipović, Ana; Bakić, Ante; Rujnić-Sokele, Maja

Influence of crosslinking parameters on the quality of rubber product // Tehnički vjesnik, 17 (2010), 2; 185-190 (podatak o recenziji nije dostupan, prethodno priopćenje, znanstveni)

2044.

Jakopčić, Mirko; Grilec, Krešimir

Influence of Artillery Weapon Barrel Superheat on Erosion Wear Resistance of Material // Transaction of FAMENA, 34 (2010), 2; 27-36 (međunarodna recenzija, članak, znanstveni)

2045.

Šercer, Mladen; Raos, Pero; Rujnic-Sokele, Maja

Thermal Properties of Bio- and Synthetic-Based PUR Foams // International Journal of Material Forming, 3 (2010), Suppl. 1; 535-538 doi:10.1007/s12289-010-0825-x (međunarodna recenzija, članak, znanstveni)

doi www.springerlink.com

2046.

Rezić, Iva; Ćurković, Lidija; Ujević, Magdalena

Simple methods for characterization of metals in historical textile threads // Talanta, 82 (2010), 1; 237-244 doi:10.1016/j.talanta.2010.04.028 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com www.sciencedirect.com dx.doi.org

2047.

Grilec, Krešimir; Marić, Gojko; Jakovljević, Suzana

A STUDY ON ENERGY ABSORPTION OF ALUMINIUM FOAM // Berg- und hüttenmännische Monatshefte, 155 (2010), 5; 231-234 doi:10.1007/s00501-010-0567-6 (podatak o recenziji nije dostupan, članak, znanstveni)

doi

2048.

Senjanović, Ivo; Malenica, Šime; Tomašević, Stipe; Tomić, Marko

Hydroelastic response of large container ships // Bilten Razreda za tehničke znanosti, 14 (2010), 506; 7-36 (podatak o recenziji nije dostupan, članak, znanstveni)

2049.

Grozdek, Marino; Halasz, Boris; Ćurko, Tonko

Development of a computer program for the simulation of ice-bank system operation, Part II: Verification // International journal of refrigeration, 33 (2010), 8; 1657-1669 doi:10.1016/j.ijrefrig.2010.05.002 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com www.sciencedirect.com

2050.

Grilec, Krešimir; Jakovljević, Suzana; Prusac, Denis

Erosion of ductile cast iron with quartz particles // Technical Gazzete, 17 (2010), 1; 17-22 (međunarodna recenzija, članak, znanstveni)

2051.

Jurčević Lulić, Tanja; Sušić, Aleksandar; Kodvanj, Janoš

Biomechanical Analysis of Walking: Effects of Gait Velocity and Arm Swing Amplitude // Periodicum biologorum, 112 (2010), 1; 13-17 (međunarodna recenzija, članak, znanstveni)

2052.

Sušić, Aleksandar; Jurčević Lulić, Tanja; Veljović, Fikret

Ergonomic Evaluation Of Task Execution: Surface Electromyography In Muscular Activity Screening // Periodicum biologorum, 112 (2010), 1; 33-38 (međunarodna recenzija, članak, znanstveni)

2053.

Ćosić, Predrag; Volarević, Nikola

Some aspects of process planning improvement // Proceedings ICIL, 18 (2010), 323-330 (podatak o recenziji nije dostupan, članak, znanstveni)

Pristup cjelovitom tekstu rada

2054.

Muftić, Osman; Kuvalja, Slobodan; Hadjina, Julijana; Puljić, Antonia

Ergonomical comparision between the back function tests // Periodicum biologorum, 112 (2010), 1; 19-23 (međunarodna recenzija, članak, znanstveni)

hrcak.srce.hr

2055.

Ćosić, Predrag; Babić, Anita; Antolić, Dražen

Process Selection, Sequence of Operations and Shape Complexity : Criteria for Process Improvement // Strojarstvo, 52 (2010), 1; 5-15 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada

2056.

Schmidt, D.P.; Gopalakrishnan, S.; Jasak, Hrvoje

Multi-dimensional simulation of thermal non-equilibrium channel flow // International journal of multiphase flow, 36 (2010), 4; 284-292 doi:10.1016/j.ijmultiphaseflow.2009.11.012 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com International journal of multiphase flow

2057.

Agić, Ante; Nikitović, Milorad; Mijović, Budimir

Design Dermal Electrospun Replacement // Periodicum biologorum, 112 (2010), 1; 63-68 (međunarodna recenzija, članak, znanstveni)

2058.

Andrić, Jerolim; Žanić, Vedran; Grgić, Mate

Structural Optimization of Corrugated Transverse Bulkheads Made of Stainless Steel // Brodogradnja, 61 (2010), 1; 18-27 (međunarodna recenzija, članak, znanstveni)

2059.

Tepić, Jovan; Kostelac, Milan

An Analysis of the Influence of Railway Vehicle Mass and Velocity on Curve Resistance values // Transactions of FAMENA, 34 (2010), 1; 51-58 (međunarodna recenzija, članak, znanstveni)

2060.

Kozarac, Darko; Sjerić, Momir; Mahalec, Ivan

Introducing Initial Conditions with Non-uniform Mixtures and Fuel Injection into the Multi Zone HCCI Simulation Model // SAE technical paper series, 2010 (2010) doi:10.4271/2010-01-1083 (međunarodna recenzija, članak, znanstveni)

doi www.sae.org

2061.

Garbatov, Yordan; Rudan, Smiljko; Guedes, Soares Carlos

Fatigue assessment of welded trapezoidal joints of a very fast ferry subjected to combined load // Engineering structures, 32 (2010), 3; 800-807 doi::10.1016/j.engstruct.2009.12.007 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com www.sciencedirect.com

2062.

Ćosić, Predrag; Lisjak, Dragutin; Antolić, Dražen

The Iterative multiobjective method in optimization process planning // Tehnički vjesnik, 17 (2010), 1; 75-81 (podatak o recenziji nije dostupan, prethodno priopćenje, znanstveni)

Pristup cjelovitom tekstu rada

2063.

Opalić, Milan; Kljajin, Milan; Vučković, Krešimir

Disassembly Layout in WEEE Recycling Process // Strojarstvo, 52 (2010), 1; 51-58 (međunarodna recenzija, pregledni rad, znanstveni)

2064.

Sućeska, Muhamed; Matečić Mušanić, Sanja; Fiamengo, Ivona; Bakija, Sanko; Bakić, Ante; Kodvanj, Janoš

Study of Mechanical Properties of Naturally Aged Double Base Rocket Propellants // Central European journal of energetic materials, 7 (2010), 1; 47-60 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada www.wydawnictwa.ipo.waw.pl

2065.

Milić, Vladimir; Šitum, Željko; Essert, Mario

Robust H_infinity Position Control Synthesis of an Electro-hydraulic Servo System // ISA transactions, 49 (2010), 4; 535-542 doi:10.1016/j.isatra.2010.06.004 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com ac.els-cdn.com dx.doi.org

2066.

Ljubas, Davor; Ćurković, Lidija; Dobrović, Slaven

Photocatalytic degradation of an azo dye by UV irradiation at 254 and 365 nm // Transactions of FAMENA, 34 (2010), 1; 19-28 (međunarodna recenzija, članak, znanstveni)

2067.

Ćurković, Lidija; Bakić, Ante; Kodvanj, Janoš; Haramina, Tatjana

FLEXURAL STRENGTH OF ALUMINA CERAMICS: WEIBULL ANALYSIS // Transactions of FAMENA, 34 (2010), 1; 13-19 (međunarodna recenzija, članak, znanstveni)

2068.

Suša, Mirela; Maldague, Xavier; Boras, Ivanka

Improved method for absolute thermal contrast evaluation using Source Distribution Image (SDI) // Infrared physics & technology, 53 (2010), 3; 197-203 doi:10.1016/j.infrared.2009.11.008 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com www.sciencedirect.com

2069.

Galić, Ivica; Vučković, Krešimir; Tonković, Zdenko

NONLINEAR NUMERICAL ANALYSIS OF TWO-WAY GLOBE VALVE HOUSING // TEHNIČKI VJESNIK, 17 (2010), 1; 67-74 (podatak o recenziji nije dostupan, prethodno priopćenje, znanstveni)

2070.

Čanžar, Predrag; Tonković, Zdenko; Kodvanj, Janoš; Bakić, Ante; Tomičević, Zvonimir

Modelling of cyclic plasticity and crack propagation // Key Engineering Materials, 452-453 (2010), 825-828 (međunarodna recenzija, članak, znanstveni)

www.scientific.net

2071.

Brezak, Danko; Majetić, Dubravko; Udiljak, Toma; Kasać Josip

Flank Wear Regulation Using Artificial Neural Networks // Journal of mechanical science and technology, 24 (2010), 5; 1041-1052 doi:10.1007/s12206-010-0308-5 (međunarodna recenzija, članak, znanstveni)

doi www.springerlink.com

2072.

Božić, Željko; Wolf, Hinko; Semenski, Damir

Growth of multiple fatigue cracks in plates under cyclic tension // Transactions of FAMENA, 34 (2010), 1-12 (međunarodna recenzija, članak, znanstveni)

famena.fsb.hr

2073.

Kožuh, Zoran; Kralj, Slobodan; Garašić, Ivica; Dorn, Lutz

Mathematical model for calculating the strength of a single lap adhesive joint intended for the service in sea water // Materialwissenschaft und Werkstofftechnik, 41 (2010), 1; 53-59 doi:10.1002/mawe.200900530 (međunarodna recenzija, članak, znanstveni)

doi onlinelibrary.wiley.com

2074.

Cajner, Franjo; Landek, Darko; Leskovšek, Vojteh

Surface modifications of MARAGING steels used in the manufacture of moulds and dies // Materiali in tehnologije, 44 (2010), 1; 101-107 (međunarodna recenzija, članak, znanstveni)

2075.

Filetin, Tomislav

BENDING STIFFNESS OF ALUMINIUM FOAMS // Rad Hrvatske akademije znanosti i umjetnosti. Tehničke znanosti, 506 (2010), 15; 81-105 (podatak o recenziji nije dostupan, pregledni rad, znanstveni)

2076.

Karšaj, Igor; Sorić, Jurica; Humphrey, Jay D.

A 3-D Framework for Arterial Growth and Remodeling in Response to Altered Hemodynamics // International journal of engineering science, 48 (2010), 11; 1357-1372 doi:10.1016/j.ijengsci.2010.06.033 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com www.sciencedirect.com

2077.

Liščić, Božidar

System for Process Analysis and Hardness Prediction When Quenching Axially-Symmetrical Workpieces of Any Shape in Liquid Quenchants // Materials science forum, 638-642 (2010), 3966-3974 doi:10.4028/MSF.638-642.3966 (međunarodna recenzija, članak, znanstveni)

doi www.scientific.net

2078.

Runje, Biserka; Baršić, Gorana; Alar, Željko

Uncertainty Estimation of Coating Thickness Measurement Results // Materialprüfung, 2010/03 (2010), 182-186 (međunarodna recenzija, članak, znanstveni)

www.materialstesting.de

2079.

Anwar, Matloob; Jakšetić, Julije; Pečarić, Josip; Ur Rehman, Atiq

Exponential convexity, positive semi–definite matrices and fundamental inequalities // Journal of Mathematical Inequalities, 4 (2010), 2; 171-189 (međunarodna recenzija, članak, znanstveni)

2080.

Jakšetić, Julije; Pečarić, Josip

4-points Stolasky Means // Mediterranean journal of mathematics, 7 (2010), 3; 341-352 doi:10.1007/s00009-010-0050-3 (međunarodna recenzija, članak, znanstveni)

doi www.springerlink.com

2081.

Rolich, Tomislav; Rezić, Iva; Ćurković, Lidija

Estimation of Steel Guitar Strings Corrosion by Artificial Neural Network // Corrosion science, 52 (2010), 3; 996-1002 doi:10.1016/j.corsci.2009.11.024 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

2082.

Solenički, Goran; Budić, Ivan; Ciglar, Damir

Determination of thermal conductivity in foundry mould mixtures // Metalurgija, 49 (2010), 1; 3-7 (međunarodna recenzija, članak, znanstveni)

2083.

Alar, Vesna; Runje, Biserka; Alar, Željko

Waste Water Treatment after Removal of Thermic Oxides from Stainless Steel Welding Joints // Scholarly Research Exchange Engineering, 3 (2010), 261423-1 doi:10.3814/2010/261423 (podatak o recenziji nije dostupan, članak, znanstveni)

doi

2084.

Liščić, Božidar; Singer, Saša; Smoljan, Božo

Prediction of Quench-Hardness within the Whole Volume of Axially Symmetric Workpieces of any Shape // Journal of ASTM International, 7 (2010), 2; 1-17 doi:10.1520/JAI102647 (međunarodna recenzija, članak, znanstveni)

doi www.astm.org

2085.

Mićić, Jadranka; Pečarić, Josip; Seo, Yuki

Converses of Jensen's operator inequality // Operators and Matrices, 4 (2010), 3; 385-403 (međunarodna recenzija, članak, znanstveni)

Operators and Matrices oam.ele-math.com

2086.

Ćurković, Lidija; Ljubas, Davor; Juretić, Hrvoje

Photocatalytic decolorization kinetics of diazo dye Congo Red aqueous solution by UV/TiO2 nanoparticles // Reaction Kinetics, Mechanisms and Catalysis, 99 (2010), 1; 201-208 doi:10.1007/s11144-009-0098-x (međunarodna recenzija, članak, znanstveni)

doi www.springerlink.com www.springerlink.com

2087.

Kozmar, Hrvoje

Scale effects in wind tunnel modeling of an urban atmospheric boundary layer // Theoretical and applied climatology, 100 (2010), 1-2; 153-162 doi:10.1007/s00704-009-0156-3 (međunarodna recenzija, članak, znanstveni)

doi springerlink.metapress.com www.springerlink.com

2088.

Skozrit, Ivica; Tonković, Zdenko

On Numerical Analysis of Creep Fracture Behaviour of Medium Density Polyethylene // Key Engineering Materials, 417-418 (2010), 233-236 doi::10.4028/www.scientific.net/KEM.417-418.233 (međunarodna recenzija, članak, znanstveni)

doi www.scientific.net

2089.

Lovrenić-Jugović, Martina; Tonković, Zdenko; Skozrit, Ivica

Numerical modelling of viscoelastic/damage behaviour of cortical bone // Key Engineering Materials, 417-418 (2010), 273-276 doi::10.4028/www.scientific.net/KEM.417-418.273 (međunarodna recenzija, članak, znanstveni)

doi www.scientific.net

2090.

Andrić, Jerolim; Žanić, Vedran

The Global Structural Response Model for Multi-deck Ships in Concept Design Phase // Ocean engineering, 37 (2010), 8-9; 688-704 doi:10.1016/j.oceaneng.2010.01.018 (međunarodna recenzija, članak, znanstveni)

doi dx.doi.org www.sciencedirect.com

2091.

Domagoj, Vrgoč, Mladen, Vuković

Bisimulations and bismulation quotients of generalized Veltman models // Logic journal of the igpl, 18 (2010), 6; 870-880 (međunarodna recenzija, članak, znanstveni)

2092.

Mehulić, Ketij; Svetličić, Vesna; Vojvodic, Denis; Šegota, Suzana; Schauperl, Zdravko; Runje, Biserka

Surface structural changes of feldspathic ceramics before and after immersion in corrosive medium using Atomic Force Microscopy // Materialprufung, 52 (2010), 4; 234-240 doi:10.3139/120.110128 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada doi www.hanser-elibrary.com

2093.

Hari, Vjeran; Singer, Sanja; Singer, Saša

Block-oriented J-Jacobi Methods for Hermitian Matrices // Linear algebra and its applications, 433 (2010), 8/10; 1491-1512 doi:10.1016/j.laa.2010.06.032 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com www.sciencedirect.com

2094.

Sorić, Jurica; Jarak, Tomislav

Mixed meshless formulation for analysis of shell-like structures // Computer methods in applied mechanics and engineering, 199 (2010), 1153-1164 doi:10.1016/j.cma.2009.12.007 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com www.sciencedirect.com

2095.

Sorić, Jurica; Jarak, Tomislav

Analysis of shell-like structures by means of a meshless approach // Bilten Hrvatske akademije znanosti i umjetnosti, 14 (2010), 506; 37-57 (podatak o recenziji nije dostupan, članak, znanstveni)

2096.

Terze, Zdravko; Naudet, Joris

Structure of Optimized Generalized Coordinates Partitioned Vectors for Holonomic and Non-holonomic Systems // Multibody system dynamics, 24 (2010), 2; 203-218 doi:10.1007/s11044-010-9195-x (međunarodna recenzija, članak, znanstveni)

doi link.springer.com

2097.

Glavaš, Zoran; Unkić, Faruk; Lisjak, Dragutin

The prediction of the microstructure constituents of spheroidal graphite cast iron by using thermal analysis and artificial neural networks // Archives of metallurgy and materials, 55 (2010), 1; 247-253 (međunarodna recenzija, članak, znanstveni)

imim.pl

2098.

Marenić, Eduard; Skozrit, Ivica; Tonković, Zdenko

On the calculation of stress intensity factors and J-integrals using the submodeling technique // Journal of Pressure Vessel Technology, 132 (2010), 4; 041201-1 (međunarodna recenzija, članak, znanstveni)

2099.

Mićić, Jadranka; Pečarić, Josip

Order among power means of positive operators, II // Scientiae Mathematicae Japonicae, 71 (2010), 1; 93-109 (podatak o recenziji nije dostupan, članak, znanstveni)

2100.

Štorga, Mario; Andreasen, Mogens Myrup; Marjanović, Dorian

The design ontology : foundation for the design knowledge exchange and management // Journal of engineering design, 21 (2010), 4; 427-454 doi:10.1080/09544820802322557 (međunarodna recenzija, članak, znanstveni)

doi www.informaworld.com dx.doi.org

2101.

Smojver, Ivica; Ivančević, Darko

Numerical Simulation of Bird Strike Damage Prediction in Airplane Flap Structure // Composite structures, 92 (2010), 9; 2016-2026 doi:10.1016/j.compstruct.2009.12.006 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com ac.els-cdn.com dx.doi.org

2102.

Jasak, Hrvoje

OpenFOAM : Open source CFD in research and industry // International Journal of Naval Architecture and Ocean Engineering, 1 (2009), 2; 89-94 doi:10.2478/IJNAOE-2013-0011 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada doi www.sciencedirect.com doi.org

2103.

Soldo, Vladimir; Ruševljan, Miroslav; Ćurko, Tonko

Ispitna geotermalna dizalica topline sa sondom dubine 100 metara // EGE : energetika, gospodarstvo, ekologija, etika, 5 (2009), 114-118 (podatak o recenziji nije dostupan, pregledni rad, stručni)

2104.

Dović, Damir; Palm, Bjorn; Švaić, Srećko

Generalized correlations for predicting heat transfer and pressure drop in plate heat exchanger channels of arbitrary geometry // International journal of heat and mass transfer, 52 (2009), 19/20; 4553-4563 doi:10.1016/j.ijheatmasstransfer.2009.03.074 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com dx.doi.org

2105.

Kapustenko, Petro; Boldyryev, Stanislav; Arsenyeva, Olga; Khavin, Gennadiy

The use of plate heat exchangers to improve energy efficiency in phosphoric acid production // Journal of cleaner production, 17 (2009), 10; 951-958 doi:10.1016/j.jclepro.2009.02.005 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

2106.

Tovazhnyansky, Leonid; Kapustenko, Petro; Ulyev, Leonid; Boldyryev, Stanislav

Synthesis of energy saving integrated flowsheet for sodium hypophosphite production // Chemical Engineering transactions, 18 (2009), 93-98 doi:10.3303/CET0918013 (međunarodna recenzija, članak, znanstveni)

doi www.aidic.it

2107.

Tovazhnyanskii, L.L.; Kapustenko, P.A.; Ulyev, L.M.; Boldyryev, S.A.; Arsenyeva, O.P.; Tarnovskii, M.V.

Thermal Process Integration in the AVDU A12/2 Crude Distillation Unit during Winter Operation // Theoretical foundations of chemical engineering, 43 (2009), 6; 906-917 doi:10.1134/S0040579509060086 (međunarodna recenzija, članak, znanstveni)

doi link.springer.com

2108.

Gusel, Andrej; Ačko, Bojan; Mudronja, Vedran

Measurement uncertainty in calibration of measurement surface plates flatnes // Strojniški vestnik, 5 (2009), 286-292 (međunarodna recenzija, članak, znanstveni)

Pregled po ustanovi: Fakultet strojarstva i brodogradnje, Zagreb (MB: 120)

Radovi u časopisima

Znanstveni i pregledni radovi