Pregled po projektu: Numeričko modeliranje, simulacija i optimizacija u oblikovanju lima (MB: MZOS-069-1201787-1754)

1.

Barišić, Branimir

Concurrent Product and Technology Development. Rijeka: Fintrade & Tours, 2009 (monografija)

1.

Proceedings of International Conference on I nnovative Technologies, IN-TECH 2014 / Zlatan Car, Jan Kudláček, João Rafael da Costa Sanches Galvão (ur.). Prag: Tehnički fakultet Sveučilišta u Rijeci, 2014 (zbornik)

2.

Proceedings of International Conference on Innovative Technologies IN-TECH 2013 / Car, Zlatan ; Kudláček, Jan ; Szalay, Tibor (ur.). Rijeka: Tehnički fakultet Sveučilišta u Rijeci, 2013 (zbornik)

www.in-tech.info

3.

Proceedings of International Conference on Innovative Technologies IN-TECH 2012 / Car, Zlatan ; Kudláček, Jan ; Pepelnjak, Tomaž (ur.). Rijeka: Tehnički fakultet Sveučilišta u Rijeci, 2012 (zbornik)

4.

Proceedings of International Conference on Innovative Technologies IN-TECH 2011 / Kudlaček, Jan ; Car, Zlatan ; Barišić, Branimir ; Pepelnjak, Tomaž ; Pakosta, Michal ; Kršulja, Marko (ur.). Prag: Tisk AS Jaroměř, 2011 (zbornik)

5.

Proceedings of International Conference on Innovative Technologies IN-TECH 2010 / Kudlaček, Jan ; Barišić, Branimir ; Velay, Xavier ; Ohkura, Kazuhiro (ur.). Prag: Tisk AS, 2010 (zbornik)

1.

Ogrizović, Dario; Car, Zlatan; Kovačić, Božidar

Scientific Applications in Cloud Computing // The IPSI BGD Transactions on Advanced Research, 10 (2014), 1; 27-33 (podatak o recenziji nije dostupan, članak, znanstveni)

ipsitransactions.org

2.

Drasnar, Petr; Kudláček, Jan; Pepelnjak, Tomaž; Car, Zlatan; Pazderova, Martina

Zinc-Polytetrafluoroethylene (Zn-PTFE) Composite Coating with Exploitable Tribological Properties // Journal of engineering technology, 30 (2013), 1; 30-36 doi:http://connection.ebscohost.com/c/articles/87688065/zinc-polytetrafluoroethylene-zn-ptfe-composite-coating-exploitable-tribological-properties (podatak o recenziji nije dostupan, članak, znanstveni)

doi www.engtech.org

3.

Čep, Robert; Janásek, Adam; Čepová, Lenka; Petrů, Jana; Hlavatý, Ivo; Car, Zlatan; Hatala, Michal

Experimental Testing of Exchangeable Cutting Inserts Cutting Ability // Tehnicki Vjesnik-Technical Gazette, 20 (2013), 1; 21-26 (međunarodna recenzija, članak, znanstveni)

4.

Tomić, Draško; Ogrizović, Dario; Car, Zlatan

Cloud Solutions for High Performance Computing: Oxymoron or Realm? // Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 20 (2013), 1; 177-182 (podatak o recenziji nije dostupan, prethodno priopćenje, znanstveni)

5.

Plančak, Miroslav; Movrin, Dejan; Vilotić, Dragiša; Car, Zlatan; Ivanišević, Aljoša; Kačmarcik, Igor;

An analysis of non-axisymmetric backward extrusion // Tehnicki Vjesnik-Technical Gazette, 19 (2012), 4; 953-957 doi:http://hrcak.srce.hr/index.php?show=clanak&id_clanak_jezik=137744 (međunarodna recenzija, članak, znanstveni)

doi

6.

Kršulja, Marko; Mijić, Saša; Barišić, Branimir; Car, Zlatan

Design and Planning of Clamping Work-holder Station for Sheet Metal Part of Car Body // Manufacturing and industrial engineering, 11 (2012), 2; 38-43 (podatak o recenziji nije dostupan, članak, znanstveni)

opac.lib.tuke.sk web.tuke.sk web.tuke.sk

7.

Plančak, Miroslav; Kacmarcik, Igor; Vilotić, Dragiša; Kršulja, Marko

Compression of Bimetallic Components – Analytical and Experimental Investigation // Annals of the Faculty of Engineering Hunedoara, X (2012), 2; 157-160 (podatak o recenziji nije dostupan, članak, znanstveni)

annals.fih.upt.ro annals.fih.upt.ro

8.

Plančak, Miroslav; Car, Zlatan; Kršulja, Marko; Vilotić, Dragiša; Kačmarcik, Igor; Movrin, Dejan

Possibilities to Measure Contact Friction in Bulk Metal Forming // Tehnicki Vjesnik-Technical Gazette, 19 (2012), 4; 727-734 doi:http://hrcak.srce.hr/index.php?show=clanak&id_clanak_jezik=137660 (međunarodna recenzija, članak, znanstveni)

doi

9.

Pepelnjak, Tomaž; Magoč, Vladimir; Barišić, Branimir

Analysis of Shear Hat Test in Digital Environment // METALURGIJA, 51 (2012), 2; 153-156 (međunarodna recenzija, članak, znanstveni)

public.carnet.hr public.carnet.hr

10.

Kršulja, Marko; Car, Zlatan; Radelja, Hrvoje

Behaviour of X5 CrNiMo 17-12-2 Material During Deep Drawing Process // METALURGIJA, 51 (2012), 2; 203-206 (međunarodna recenzija, članak, znanstveni)

public.carnet.hr public.carnet.hr

11.

Plančak, Miroslav; Car, Zlatan; Vilotić, Dragiša; Movrin, Dejan; Kršulja, Marko

Upsetting of Bimetallic Components in Closed Die // Engineering review : znanstveni časopis za nove tehnologije u strojarstvu, brodogradnji i elektrotehnici, 31 (2011), 2; 105-109 (međunarodna recenzija, članak, znanstveni)

12.

Stanković, Igor; Car, Zlatan, Barišić, Branimir

Comparative simulations of the heavy machining production system // Engineering review : znanstveni časopis za nove tehnologije u strojarstvu, brodogradnji i elektrotehnici, 31 (2011), 1; 1-11 (međunarodna recenzija, članak, znanstveni)

13.

Plančak, Miroslav; Barišić, Branimir; Vilotić, Dragiša; Kacmarcik, Igor; Movrin, Dejan; Skakun, Plavka; Milutinović, Maladimir

Analytical and Numerical Solutions for Friction Calibration Curves (FCC) in Bulk Metal Forming // CA systems in production process planning, 12 (2011), 1; 107-110 (podatak o recenziji nije dostupan, članak, znanstveni)

14.

Lazanja, Matej; Barišić, Branimir; Car, Zlatan; Plančak, Miroslav

Accuracy Inspection of a Milling Machine with Ballbar System // CA systems in production process planning, 12 (2011), 1; 79-82 (podatak o recenziji nije dostupan, članak, znanstveni)

15.

Matković, Romeo; Kršulja, Marko; Barišić, Branimir; Plančak, Miroslav

CMM Measurement and Measurement Quality Plan for Dimension Control // CA systems in production process planning, 12 (2011), 1; 87-90 (podatak o recenziji nije dostupan, članak, znanstveni)

Pristup cjelovitom tekstu rada

16.

Budak, Igor; Soković, Mirko; Barišić, Branimir

Accuracy Improvement of Point Data Reduction with Sampling-Based Methods by Fuzzy Logic-Based Decision-Making // Measurement, 44 (2011), 6; 1188-1200 doi:10.1016/j.measurement.2011.03.026 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com pdn.sciencedirect.com dx.doi.org

17.

Ungureanu, Nicolae; Ungureanu, Miorita; Cotetiu, Adriana; Barišić, Branimir; Grozav, Sorin

Principles of the Maintenance Management // Scientific Bulletin. Serie C, Fascicle Mechanics, Tribology, Machine Manufacturing Technology, 14 (2010), 1; 69-72 (podatak o recenziji nije dostupan, članak, znanstveni)

www.nordtech.ubm.ro www.nordtech.ubm.ro

18.

Kuric, Ivan; Barišić, Branimir

Trends of Computer Support in Pre-Production Stage // Scientific Bulletin. Serie C, Fascicle Mechanics, Tribology, Machine Manufacturing Technology, 14 (2010), 43-48 (podatak o recenziji nije dostupan, članak, znanstveni)

www.nordtech.ubm.ro www.nordtech.ubm.ro

19.

Kršulja, Marko; Barišić, Branimir; Plančak, Miroslav; Čep, Robert;

Investigation Of Alluminium Alloy Composition AlSi9Cu3 Alloy In Foundury Process // Technologické inžinierstvo / Technological engineering, 7 (2010), 2; 53-56 (podatak o recenziji nije dostupan, članak, znanstveni)

Pristup cjelovitom tekstu rada

20.

Plančak, Miroslav; Kuzman, Karl; Barišić, Branimir; Vilotić, Dragiša; Čupković, Djordje

Analysis of the Double Backward Extrusion Process // Cercetări metalurgice şi de noi materiale, VIII (2010), 2; 15-21 (podatak o recenziji nije dostupan, članak, znanstveni)

21.

Rucki, Miroslaw; Barišić, Branimir; Ocenasova, Lenka

Dynamic Calibration of Air Gauges // Archiwum Technologii Maszyn i Automatyzacji, 30 (2010), 2; 129-135 (podatak o recenziji nije dostupan, članak, znanstveni)

www.atmia.put.poznan.pl

22.

Dražić, Ivan; Barišić, Branimir; Mujaković, Nermina; Čep, Robert

Implementation of Shishkin mesh in the modelling of spring-mass system // Sborník vědeckých prací Vysoké školy báňské-Technické univerzity Ostrava. Řada strojní (1992), LVI (2010), 1; 49-52 (podatak o recenziji nije dostupan, članak, znanstveni)

23.

Benčić, Marijan; Barišić, Branimir; Varga, Gyula; Miroslav Plančak

Technology of Roller Bed Belt Conveyor Manufacture by Implemention of CAD-CAM Connection // Engineering review : znanstveni časopis za nove tehnologije u strojarstvu, brodogradnji i elektrotehnici, 30 (2010), 1; 1-12 (podatak o recenziji nije dostupan, članak, znanstveni)

24.

Jermak, Czeslaw Janusz; Barišić, Branimir; Rucki, Miroslaw

Correction of the Metrological Properties of the Pneumatic Length Measuring Gauges through Changes of the Measuring Nozzle Head Surface Shape // Measurement, 43 (2010), 9; 1217-1227 doi:10.1016/j.measurement.2010.06.001 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com www.sciencedirect.com

25.

Matysiak, Waldemar; Barišić, Branimir; Mamuzić, Ilija

Elaboration of The Technology of Forming a Conical Product of Sheet Metal // Metalurgija, 49 (2010), 1; 13-18 (međunarodna recenzija, članak, znanstveni)

public.carnet.hr

26.

Barišić, Branimir; Mamuzić, Ilija; Nastran, Miha;

Improvement in Sheet Metal Forming Technology due to the Use of Different Software Aproaches // Transactions of FAMENA, 34 (2010), 1; 29-38 (međunarodna recenzija, članak, znanstveni)

famena.fsb.unizg.hr

27.

Rucki, Miroslaw; Barišić, Branimir; Varga, Gyula

Air Gauges as a Part of the Dimensional Inspection Systems // Measurement, 43 (2010), 1; 83-91 doi:10.1016/j.measurement.2009.07.001 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com www.sciencedirect.com

28.

Unguraenu, Nicolae; Ungureanu, Miorita; Cotetiu, Radu; Barišić, Branimir

Planning and Scheduling in Maintenance // Scientific Bulletin. Serie C, Fascicle Mechanics, Tribology, Machine Manufacturing Technology, XXIII (2009), serie c; 169-173 (podatak o recenziji nije dostupan, članak, znanstveni)

nordtech.ubm.ro

29.

Deželjin, Dejan; Barišić, Branimir; Szalay, Tibor; Kršulja, Marko

Creating A Palette Bow Tipper With Technology Of Deformation // Engineering review : znanstveni časopis za nove tehnologije u strojarstvu, brodogradnji i elektrotehnici, 29 (2009), 1; 71-79 (podatak o recenziji nije dostupan, prethodno priopćenje, znanstveni)

www.riteh.hr

30.

Rucki, Miroslaw; Barišić, Branimir

Response Time of Air Gauges With Different Volumes of The Measuring Chambers // Metrology and Measurement Systems, XVI (2009), 2; 289-298 (međunarodna recenzija, članak, znanstveni)

31.

Car, Zlatan; Barišić, Branimir; Rucki, Miroslaw

Emergent Synthesis Based Multi-Objective Design of the Manufacturing System Shop-Floor // Strojniški vestnik, 55 (2009), 9; 523-530 (međunarodna recenzija, članak, znanstveni)

www.sv-jme.eu

32.

Kršulja, Marko; Barišić, Branimir; Kudlaček, Jan

Assembly Setup for Modular Fixture Machining Process // Advanced engineering, 3 (2009), 1; 39-51 (podatak o recenziji nije dostupan, članak, znanstveni)

Pristup cjelovitom tekstu rada

33.

Car, Zlatan; Barišić, Branimir; Kršulja, Marko

Simulation and Modelling of Paths Processing Time in a Flexible Manufacturing System // Výrobné inžinierstvo, VIII (2009), 3; 40-45 (podatak o recenziji nije dostupan, članak, znanstveni)

Pristup cjelovitom tekstu rada opac.lib.tuke.sk

34.

Kršulja, Marko; Štefančić, Mauro; Barišić, Branimir

Forming Processes in Manufacture of An Access Cover and Control of Position Tolerances // Výrobné inžinierstvo, VIII (2009), 3; 33-39 (podatak o recenziji nije dostupan, članak, znanstveni)

Pristup cjelovitom tekstu rada

35.

Plančak, Miroslav; Kuzman, Karl; Barišić, Branimir; Vilotić, Dragiša; Lužanin, Ognjan

Non - Homogeneity of Wall Thickness In Tube Hydroforming // Cercetări metalurgice şi de noi materiale, XVII (2009), 4; 1-8 (podatak o recenziji nije dostupan, članak, znanstveni)

36.

Dražić, Ivan; Barišić, Branimir; Jurasić, Katica

Modeling of orthoptic curve associated to couple of circles // Technologické inžinierstvo / Technological engineering, 6 (2009), 2; 13-16 (podatak o recenziji nije dostupan, članak, znanstveni)

37.

Car, Zlatan; Ohkura, Kazuhiro; Barišić, Branimir

Application of Multi-Agent Technology and Heterarhical Architecture for Production Scheduling // Engineering review : znanstveni Časopis za nove tehnologije u strojarstvu, brodogradnji i elektrotehnici, 29 (2009), 1; 1-10 (podatak o recenziji nije dostupan, članak, znanstveni)

38.

Soković, Mirko; Barišić, Branimir; Sladić, Saša

Model of Quality Management of Hard Coatings on Ceramic Cutting Tools // Journal of Materials Processing Technology, 209 (2009), 8; 4207-4216 doi:10.1016/j.jmatprotec.2008.11.026 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

39.

Pepelnjak, Tomaž; Barišić, Branimir

Computer-assisted engineering determination of the formability limit for thin sheet metals by a modified Marciniak method // Journal of Strain Analysis for Engineering Design, 44 (2009), 6; 459-472 doi:10.1243/03093247JSA503 (međunarodna recenzija, članak, znanstveni)

doi journals.pepublishing.com

40.

Car, Zlatan; Barišić, Branimir; Ikonić, Milan

GA Based CNC Turning Center Exploitation Process Parameters Optimization // Metalurgija, 48 (2009), 1; 47-50 (podatak o recenziji nije dostupan, prethodno priopćenje, znanstveni)

public.carnet.hr

41.

Barišić, Branimir; Ungureanu, Nicolae; Car, Zlatan

Investigation of Forming Force at Backward Extrusion Process on Different Aluminum Materials // Scientific Bulletin. Serie C, Fascicle Mechanics, Tribology, Machine Manufacturing Technology, XXII (2008), 1; 21-27 (podatak o recenziji nije dostupan, članak, znanstveni)

www.nordtech.ubm.ro

42.

Barišić, Branimir; Ungureanu, Mioriţa; Car, Zlatan

A Numerical Approach to the Establishment of a Sheet Metal Forming Process Technology // Annals of University of Petroşani. Mechanical Engineering, 10 (2008), 1; 11-22 (podatak o recenziji nije dostupan, članak, znanstveni)

43.

Čep, Robert; Neslušan, Miroslav; Barišić, Branimir

Chip Formation Analysis During Hard Turning // Strojarstvo, 50 (2008), 6; 337-346 (međunarodna recenzija, članak, znanstveni)

44.

Mijić, Saša; Barišić, Branimir; Kudlaček, Jan

Technology of Metal Drawer Manufacture by Implemention of CAD-CAM Connection // Engineering Review, 28 (2008), 1; 73-83 (podatak o recenziji nije dostupan, prethodno priopćenje, znanstveni)

www.riteh.hr

45.

Dražić, Ivan; Barišić, Branimir; Mujaković, Nermina

The implementation of iterative outer approximation method for elasto-plastic torsion problem // Technologické inžinierstvo / Technological engineering, 5 (2008), 1; 37-39 (podatak o recenziji nije dostupan, članak, znanstveni)

46.

Barišić, Branimir; Pepelnjak, Tomaz; Math, Miljenko

Predicting of the Lueders bands in the processing of TH material in computer environment by means of stochastic modeling // Journal of Materials Processing Technology, 203 (2008), 1-3; 154-165 doi:10.1016/j.jmatprotec.2007.09.054 (međunarodna recenzija, članak, znanstveni)

Pristup cjelovitom tekstu rada doi www.sciencedirect.com

47.

Ungeruanu, Nicolae; Barišić, Branimir; Ungeruanu, Miorita

Consideration about Reliability of Gears // CA systems in production process planning, 9 (2008), 1; 77-80 (podatak o recenziji nije dostupan, članak, znanstveni)

48.

Sladić, Saša; Barišić, Branimir; Soković, Mirko

Cost-Effective Power Converter for Thin Film Solar Cell Technology and Improved Power Quality // Journal of Materials Processing Technology, 201 (2008), 1-3; 786-792 doi:10.1016/j.jmatprotec.2007.11.161 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

49.

Rucki, Miroslaw; Barišić, Branimir; Szalay, Tibor

Analysis of Air Gage Inaccuracy Caused by Flow Instability // Measurement, 41 (2008), 6; 655-661 doi:10.1016/j.measurement.2007.10.001 (međunarodna recenzija, članak, znanstveni)

doi www.sciencedirect.com

50.

Pauletić, Nenad; Barišić, Branimir; Kršulja, Marko

Controll Board Stand for TRUMPF Presses Manufacturing by Metal Forming Aplication // Engineering Review, 27 (2007), 2; 103-112 (podatak o recenziji nije dostupan, prethodno priopćenje, znanstveni)

51.

Szelewski, Maciej; Grzelka, Miroslaw; Barišić, Branimir

Free Surface Scanning with CMM and its Reproduction in CAD System // Engineering Review, 27 (2007), 1; 7-13 (podatak o recenziji nije dostupan, članak, znanstveni)

52.

Pepelnjak, Tomaž; Barišić, Branimir

Analysis and elimination of the stretcher strains on TH415 tinplate rings in the stamping process // Journal of Materials Processing Technology, 186 (2007), 1-3; 111-119 (međunarodna recenzija, članak, znanstveni)

53.

Barišić, Branimir; Math, Miljenko; Grizelj, Branko

Analytic, Numerical, And Stochastic Comparison Of Forming Force Modeling At Deep Drawing And Backward Extrusion On The Same Al 99.5 F7 Parts // Key engineering materials, 344 (2007), 419-426 doi:10.4028/www.scientific.net/KEM.344.419 (međunarodna recenzija, članak, znanstveni)

doi www.scientific.net

1.

Svetić, Sandi; Sok, Anton

The Basics of 64-Bit Computing // Engineering review : znanstveni Čopis za nove tehnologije u strojarstvu, brodogradnji i elektrotehnici, 28 (2008), 2; 119-130 (podatak o recenziji nije dostupan, članak, stručni)

1.

Ungureanu, Nicolae; Năsui, Vasile; Barišić, Branimir; Alexandrescu, Marius

Maintenance Efficiency Indicators of Systems // Scientific Bulletin. Serie C, Fascicle Mechanics, Tribology, Machine Manufacturing Technology, 23 (2009), 1; 357-361 (podatak o recenziji nije dostupan, izvorni znanstveni rad, znanstveni)

2.

Sladić, Saša; Barišić, Branimir; Ungureanu, Nicolae

Adoption of active power H-bridge filter to vibration compensator for machining processes // Journal Manufacturing Engineering, 7 (2008), 3; 80-86 (podatak o recenziji nije dostupan, izvorni znanstveni rad, znanstveni)

3.

Car, Zlatan; Barišić, Branimir; Novak; Jozef

Multy Objective Evolutionary Based Scheduling // Jourrnal Manufacturing Engineering, 7 (2008), 2; 47-51 (podatak o recenziji nije dostupan, izvorni znanstveni rad, znanstveni)

4.

Cep, Robert; Barišić, Branimir

Testing of Ceramic Cutting Tools with an Interrupted Cut Simulator // Engineering Review, 28 (2008), 1; 11-16 (podatak o recenziji nije dostupan, izvorni znanstveni rad, znanstveni)

www.riteh.hr

5.

Barišić, Branimir; Rucki, Miroslaw; Car, Zlatan

Analysis of Digitizing and Traditional Measuring System at Surface Measurement of Lids // Key Engineering Materials, 381-382 (2008), 217-221 (podatak o recenziji nije dostupan, izvorni znanstveni rad, znanstveni)

6.

Plancak, Miroslav; Barišić, Branimir; Grizelj, Branko

Different Possibilities of Process Analysis in Cold Extrusion // Key Engineering Materials, 367 (2008), 209-215 (podatak o recenziji nije dostupan, izvorni znanstveni rad, znanstveni)

www.scientific.net www.scientific.net

7.

Grizelj, Branko; Plančak, Miroslav; Barišić, Branimir

Numerical Simulation of Combined Forward-Backward Extrusion // Key Engineering Materials, 367 (2008), 193-201 (podatak o recenziji nije dostupan, izvorni znanstveni rad, znanstveni)

8.

Barišić, Branimir; Grizelj, Branko; Plancak, Miroslav

Modeling Approach for Determination of Backward Extrusion Strain Energy on AlCu5PbBi // Key Engineering Materials, 367 (2008), 221-230 (podatak o recenziji nije dostupan, izvorni znanstveni rad, znanstveni)

9.

Rucki, Miroslaw; Barišić, Branimir

Improvement of Air Gauges Metrological Properties through Constructional Changes // Strojírenská technologie, 5 (2007), XII; 199-203 (podatak o recenziji nije dostupan, izvorni znanstveni rad, znanstveni)

10.

Grizelj, Branko; Barišić, Branimir; Math, Miljenko

FEM in Plate Bending // Key Engineering Materials, 344 (2007), -; 269-276 (podatak o recenziji nije dostupan, izvorni znanstveni rad, znanstveni)

www.scientific.net www.scientific.net

1.

G. Janes, Z. Car, D. Ogrizovic

Accelerators on parallel roads to exascale computing // Proceedings of International Conference on I nnovative Technologies / Zlatan Car, Jan Kudláček, João Rafael (ur.).
Prag: Tehnički fakultet Sveučilišta u Rijeci, 2014. str. 333-337 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

2.

Leon Šikulec, Mate Torlak, Zlatan Car

The development, implementation and comparison of models of industrial robot using Modelica modeling language // Proceedings of International Conference on Innovative Technologies / Zlatan Car, Jan Kudláček, João Rafael (ur.).
Prag: Tehnički fakultet Sveučilišta u Rijeci, 2014. str. 329-333 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

3.

Ogrizović, Dario; Car, Zlatan; Janeš, Gordan; Kovačić, Božidar

Doing Science in the Cloud // International Conference on Innovative Technologies IN-TECH / Car, Zlatan ; Kudláček, Jan ; Szalay, Tibor (ur.).
Rijeka: Tehnički fakultet Sveučilišta u Rijeci, 2013. str. 385-388 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

4.

Janeš, Gordan; Car, Zlatan; Ogrizović, Dario

A Fast Genetic Algorithm Based on Single Gene Evaluation Fitness Mechanism for Job-Shop Scheduling Problem // International Conference on Innovative Technologies IN-TECH / Car, Zlatan ; Kudláček, Jan ; Szalay, Tibor (ur.).
Rijeka: Tehnički fakultet Sveučilišta u Rijeci, 2013. str. 345-348 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

5.

Plančak, Miroslav; Movrin, Dejan; Car, Zlatan; Durakbasa N.; Vilotić, Dragiša

Orbital Forging of Cross Joint Component // International Conference on Innovative Technologies IN-TECH / Car, Zlatan ; Kudláček, Jan ; Szalay, Tibor (ur.).
Rijeka: Tehnički fakultet Sveučilišta u Rijeci, 2013. str. 265-268 (pozvano predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

6.

Zoubek, M.; Kudláček, Jan; Drašnar, Petr; Herrmann, F.; Valeš, M.; Car, Zlatan

The New Wear-Resistant Coating Systems Containing Carbon Nanotubes // International Conference on Innovative Technologies IN-TECH / Car, Zlatan ; Kudláček, Jan ; Szalay, Tibor (ur.).
Rijeka: Tehnički fakultet Sveučilišta u Rijeci, 2013. str. 173-176 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

7.

Šikulec, Leon; Perčić, Katja; Plančak, Miroslav; Car, Zlatan; Kačmarčik, Igor; Štrbac, Branko

Analyzing Anomalies of Injection Tooling Mold Design // International Conference on Innovative Technologies IN-TECH / Car, Zlatan ; Kudláček, Jan ; Szalay, Tibor (ur.).
Rijeka: Tehnički fakultet Sveučilišta u Rijeci, 2013. str. 425-428 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

8.

Kršulja, Marko; Štefančić, Mauro; Car, Zlatan; Pepelnjak, Tomaž; Plančak, Miroslav; Vojkovský, Karel

Finite Analysis of Deep Drawing Tool Geometry for Thin Walled Tin Can // International Conference on Innovative Technologies IN-TECH / Car, Zlatan ; Kudláček, Jan ; Szalay, Tibor (ur.).
Rijeka: Tehnički fakultet Sveučilišta u Rijeci, 2013. str. 401-404 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

9.

Uravić, Valter; Car, Zlatan; Kršulja, Marko; Šikulec, Leon; Radelja, Hrvoje

Investigation of Dry and Combined Method Used for Measurement and Maintenance Control of Liquid Storage Tank Capacity // Proceedings PLIN2012 / Raos, Pero (ur.).
Slavonski Brod: Strojarski fakultet Sveučilišta u Slavonskom Brodu, 2012. str. 5-1 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

10.

Zenzerović, Paolo; Macuka, Daniel; Krišković, Domagoj

Signal Switching Matrices for Remote Laboratories - existing Solutions and a Novel Approach using FPGA Technology // Annals of DAAAM for 2012. & Proceedings of the 23rd International DAAAM Symposium / Katalinić, Branko (ur.).
Beč: DAAAM International Vienna, 2012. str. 1179-1182 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

11.

Zenzerović, Paolo; Macuka, Daniel; Mijajlović, Dora

Remote Laboratories in Electronics Engineering Education // Annals of DAAAM for 2012. & Proceedings of the 23rd International DAAAM Symposium / Katalinić, Branko (ur.).
Beč: DAAAM International Vienna, 2012. str. 1183-1186 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

12.

Jurjević, Marin; Kršulja, Marko; Katalinić, Branko; Car, Zlatan; Šikulec, Leon

Automatic Measurement of Rotational Speeds and Lathe Maintenance // Annals of DAAAM for 2012. & Proceedings of the 23rd International DAAAM Symposium / Katalinic, Branko (ur.).
Beč: DAAAM International Vienna, 2012. str. 775-778 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

13.

Plančak, Miroslav; Vilotić, Dragiša; Car, Zlatan; Movrin, Dejan; Kačmarcik, Igor; Kršulja, Marko

Forward Extrusion of Bi-metallic Components // Proceedings of 4th International Scientific and Expert Conference of the International TEAM Society / Marija Živić ; Tomislav Galeta (ur.).
Osijek: Mechanical Engineering Faculty in Slavonski Brod, Josip Juraj Strossmayer University of Osijek and International TEAM Society, 2012, 2012. str. 125-128 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

14.

Kršulja, Marko; Kuzman; Karl; Plančak, Miroslav; Math Miljenko; Car, Zlatan

Investigation of Single Point Incremental Forming Process Applied on Thin Sheet Metal // International Conference on Innovative Technologies IN-TECH / Car, Zlatan ; Kudláček, Jan ; Pepelnjak, Tomaž ; (ur.).
Rijeka: Tehnički fakultet Sveučilišta u Rijeci, 2012. str. 583-586 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

15.

Kačmarčik, Igor, Štrbac, Branko; Šikulec, Leon

Analysis of Bulk Metal Forming by UBET – Case Studies // International Conference on Innovative Technologies IN-TECH / Car, Zlatan ; Kudláček, Jan ; Pepelnjak, Tomaž ; (ur.).
Rijeka: Tehnički fakultet Sveučilišta u Rijeci, 2012. str. 357-360 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

16.

Šikulec, Leon; Hasković, Damir; Radelja, Hrvoje

Virtual Model and Production Plant Simulation for Optimization of Powder Coating Process // International Conference on Innovative Technologies IN-TECH / Car, Zlatan ; Kudláček, Jan ; Pepelnjak, Tomaž ; (ur.).
Rijeka: Tehnički fakultet Sveučilišta u Rijeci, 2012. str. 579-582 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

17.

Kudláček, Jan; Chabera, Petr; Pepelnjak, Tomaž; Car, Zlatan;

Mathematical Modelling of Surface Grease Deposits // International Conference on Innovative Technologies IN-TECH / Car, Zlatan ; Kudláček, Jan ; Pepelnjak, Tomaž ; (ur.).
Rijeka: Tehnički fakultet Sveučilišta u Rijeci, 2012. str. 335-338 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

18.

Drasnar, Petr: Kudláček, Jan; Roskanin, Petr; Pepelnjak, Tomaž; Car, Zlatan; Vales, M.

Introduction of New Surface Treatment Technologies Into Practice - Zinc Based Composite Coating with PTFE Particles (Zn-PTFE Coating) // International Conference on Innovative Technologies IN-TECH / Car, Zlatan ; Kudláček, Jan ; Pepelnjak, Tomaž ; (ur.).
Rijeka: Tehnički fakultet Sveučilišta u Rijeci, 2012. str. 339-342 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

19.

Kršulja, Marko; , Roškanin, Petr; Kudláček, Jan; Pomenić, Loreta; Car, Zlatan

Investigation of Coatings Friction Coefficient Used in Production of Deep Drawn Packaging Cans // International Conference on Innovative Technologies IN-TECH / Car, Zlatan ; Kudláček, Jan ; Pepelnjak, Tomaž ; (ur.).
Rijeka: Tehnički fakultet Sveučilišta u Rijeci, 2012. str. 443-446 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

20.

Vojkovský, Karel; Kudláček, Jan; Pakosta, Michal; Kršulja, Marko

PCN2 – Cyclic Loading Pulsator, For Research on Hydrogen Embrittlement in Surface Treatment Technology // International Conference on Innovative Technologies IN-TECH / Car, Zlatan ; Kudláček, Jan ; Pepelnjak, Tomaž ; (ur.).
Rijeka: Tehnički fakultet Sveučilišta u Rijeci, 2012. str. 439-442 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

21.

Plančak, Miroslav; Movrin, Dejan; Car, Zlatan; Dragiša Vilotić; Kacmarcik, Igor; Kršulja, Marko

BI-Metallic Cold Backward Extrusion – Numerical Simulation with Experimental Verification // International Conference on Innovative Technologies IN-TECH / Car, Zlatan ; Kudláček, Jan ; Pepelnjak, Tomaž ; (ur.).
Rijeka: Tehnički fakultet Sveučilišta u Rijeci, 2012. str. 417-420 (pozvano predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

22.

Kršulja, Marko; Barišić, Branimir.; Pomenić, Loreta; Car, Zlatan; Šikulec, Leon.

Thin Metal Material TH 415 Composition Testing // 13th International Scientific Conference Automation in Production Planning and Manufacturing / Kuric, Ivan (ur.).
Žilina: Scientific and Technical Society at the University of Žilina, 2012. str. 133-139 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

23.

Radelja, Hrvoje; Hasković, Damir; Šikulec, Leon; Plančak, Miroslav; Kršulja, Marko; Car, Zlatan

Concept for online web machine tool control based on open source // Proceedings of 8th International Conference of DAAAM Baltic INDUSTRIAL ENGINEERING / Otto, T. (ur.).
Talin: Tallinn University of Technology, 2012. str. 216-221 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

24.

Zenzerović, Paolo; Macuka, Daniel; Krišković, Domagoj

Remote Laboratory for Automation System Design // Annals of DAAAM for 2011 & PROCEEDINGS of the 22nd International DAAAM Symposium / Katalinić, Branko (ur.).
Beč: DAAAM International Vienna, 2011. str. 1655-1656 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

25.

Zenzerović, Paolo; Car, Zlatan

Vehicle Beam Light Assistant System // Annals of DAAAM for 2011 & PROCEEDINGS of the 22nd International DAAAM Symposium / Katalinić, Branko (ur.).
Beč: DAAAM International Vienna, 2011. str. 1653-1654 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

26.

Hodak, Marko; Barišić, Branimir; Katalinić, Branko; Kršulja, Marko; Car, Zlatan

Flatness of Mechanical Interface of Housing Filter: Comparing Methods // Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAM Symposium / Katalinić, Branko (ur.).
Beč: DAAAM International Vienna, 2011. str. 1381-1382 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

27.

Jurjević, Marin; Barišić, Branimir; Katalinić, Branko; Kršulja, Marko; Car, Zlatan

Suitable Devices for Measuring Roughness on Oil Filter Housing // Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAM Symposium / Katalinić, Branko (ur.).
Beč: DAAAM International Vienna, 2011. str. 1351-1352 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

28.

Despot, Veselka; Barišić, Branimir; Katalinić, Branko; Kršulja, Marko; Car, Zlatan;

Radioscopic measurement on fuel filter support: inspection for health of material // Annals of DAAAM for 2011 & Proceedings of the 22nd International DAAAM Symposium / Katalinić, Branko (ur.).
Beč: DAAAM International Vienna, 2011. str. 1359-1360 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

29.

Bogović, Iva-Nicol; Barišić, Branimir; Katalinić, Branko; Kršulja, Marko; Car, Zlatan

Digitizing system ATOS - measuring turbo compressor housing // Annals of DAAAM for 2011 & Procedingd of the 22nd International DAAAM Symposium / Katalinić, Branko (ur.).
Beč: DAAAM International Vienna, 2011. str. 1367-1368 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

30.

Barišić, Branimir; Kuzmanović, Siniša; Rackov, Milan

Effect of External Loads at the Output Shaft End of Universal Worm Gear Reductor on its Thermal Capacity // International Scientific Conference ''Research and Development of Mechanical Elements and Systems'' / Miltenović, Vojislav (ur.).
Niš: SVEN, Niš, University of Niš, Mechanical Engineering Faculty, 2011. str. 535-540 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

31.

Barišić, Branimir; Jurjević, Marin; Plančak, Miroslav

Comparison of Device for Measuring Surface Roughness // Proceedings / Kuric, Ivan (ur.).
Žilina: University of Zilina, 2011. str. 9-14 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

32.

Drasnar, Petr; Kudlaček, Jan; Kreibich, Viktor; Roskanin, Petr; Pakosta, Michal; Vales, Miroslav; Car, Zlatan

The Tribological Properties of Zn-PTFE Composite Coating // International Conference on Innovative Technologies IN-TECH / Kudlaček, Jan ; Car, Zlatan ; Barišić, Branimir ; Pepelnjak, Tomaž ; Pakosta, Michal ; Kršulja, Marko (ur.).
Prag: Tisk AS Jaroměř, 2011. str. 142-146 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

33.

Éles, Imre; Szalay, Tibor; Barišić, Branimir

Adjustable Positioning Using Deformation of V-Blocks // International Conference on Innovative Technologies IN-TECH / Kudlaček, Jan ; Car, Zlatan ; Barišić, Branimir ; Pepelnjak, Tomaž ; Pakosta, Michal ; Kršulja, Marko (ur.).
Prag: Tisk AS Jaroměř, 2011. str. 183-187 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

34.

Lazanja, Matej; Barišić, Branimir; Car, Zlatan

Considerations on the use of Ballbar System in Accuracy Assessment of the Triaxial CNC Machine Tool // International Conference on Innovative Technologies IN-TECH / Kudlaček, Jan ; Car, Zlatan ; Barišić, Branimir ; Pepelnjak, Tomaž ; Pakosta, Michal ; Kršulja, Marko (ur.).
Prag: Tisk AS Jaroměř, 2011. str. 762-764 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

35.

Gregov, Goran; Žic, Samir; Kršulja, Marko; Barišić, Branimir; Kudlaček, Jan

Some Considerations on a Molding Simulation for a Polyethylene Product // International Conference on Innovative Technologies IN-TECH / Kudlaček, Jan ; Car, Zlatan ; Barišić, Branimir ; Pepelnjak, Tomaž ; Pakosta, Michal ; Kršulja, Marko (ur.).
Prag: Tisk AS Jaroměř, 2011. str. 790-793 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

36.

Šikulec, Leon; Radelja, Hrvoje; Kršulja, Marko; Car, Zlatan

Comparison in Production Planning of the Classical Method and RL Advanced Algorithms // Proceedings of International Conference on Innovative Technologies IN-TECH / Kudlaček, Jan ; Car, Zlatan ; Barišić, Branimir ; Pepelnjak, Tomaž ; Pakosta, Michal ; Kršulja, Marko (ur.).
Prag: Tisk AS Jaroměř, 2011. str. 778-780 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

37.

Radelja, Hrvoje; Kršulja, Marko; Šikulec, Leon; Car, Zlatan

Measurements Data Analysis and Defect Classification Using NN // Proceedings of International Conference on Innovative Technologies IN-TECH / Kudlaček, Jan ; Car, Zlatan ; Barišić, Branimir ; Pepelnjak, Tomaž ; Pakosta, Michal ; Kršulja, Marko (ur.).
Prag: Tisk AS Jaroměř, 2011. str. 770-772 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

38.

Božić, Denis; Kršulja, Marko; Barišić, Branimir; Matković, Romeo; Lazanja, Matej

Investigation of an a Quallity Measurement Plan for an Alternator Carrier on a CMM Machine // Quality and Innovation in Engineering and Management / Sorin Popescu, Stelian Brad & Daniela Popescu (ur.).
Cluj - Napoca: Editura U.T.Press, 2011. str. 27-30 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

39.

Gregov, Goran; Kršulja, Marko; Barišić, Branimir; Lukovics, Imrich

A Study of Plastic Processing and Tool Design for a Polypropylene Product // 8th International Tools Conference, Procedings ITC 2011 / Composite autors (ur.).
Zlín: Tomas Bata University in Zlin, Faculty of Technology, 2011. str. 156-161 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

40.

Plančak, Miroslav; Vilotić, Dragiša; Kuzman, Karl; Barišić, Branimir

Experimental Determination of Friction Coefficient in Tube Hydroforming // Proceedings of 1st International Scientific Conference on Engineering ”Manufacturing and Advanced Technologies” / Rahmić, Samir (ur.).
Mostar: University Djemal Bijedic of Mostar, 2010. str. 211-217 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

41.

Barišić, Branimir; Plančak, Miroslav; Kuzman, Karl

Sheet Metal Forming Strategy for Advanced Production in Computer Aided Manufacturing // Proceedings of 10th International Scientific Conference "New Ways in Manufacturing" Technologies / Karol, Vasilko (ur.).
Prešov: Technical University Kosiciach, 2010. str. 52-61 (pozvano predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

42.

Barišić, Branimir; Math, Dino Miljenko; Plančak, Miroslav

Implementation of Different Sheet Metal Forming Methods for Development of Mobile Holder Production // Proceedings of 11th International Conference Automation in Production Planning and Manufacturing / Kuric, Ivan (ur.).
Žilina: University of Žilina, 2010. str. 9-18 (pozvano predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

43.

Car, Zlatan; Dario, Ogrizović; Branimir, Barišić, Katalinić, Branko

Introduction of Scientific Cloud Concept for Industry Application // 14th Asia Pacific Symposium on Intelligent and Evolutionary Systems : proceedings / Ohkura, Kazuhiro (ur.).
Hiroshima: Hiroshima University, 2010. str. 213-220 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

44.

Barišić, Branimir; Miroslav, Plančak; Car, Zlatan

Analysis of Nonhomogeneous Yielding by Means of Different Intelligent System Based on Stochastic and Finite Element Method // Proceeding of The 14th Asia Pacific Symposium on Intelligent and Evolutionary Systems / Ohkura, Kazuhiro (ur.).
Hiroshima: Hiroshima University, 2010. str. 326-334 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

45.

Plančak, Miroslav; Vilotić, Dragiša; Barišić, Branimir

FE Simulation of Inhomogeneity in Tube Hydroforming // Proceeding of 13th International Scientific Conference Mechanical Engineering 2010 / Roland, Janco (ur.).
Bratislava: Slovak University of Technology in Bratislava, 2010. str. 102-110 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

46.

Štimac, Sanjin; Katalinić, Branko; Cesarec, Paulina; Radošević, Marko; Barišić, Branimir

Measurement of the closing force on the medical bottles // Annals of DAAAM for 2010 & Proceedings / Katalinić, Branko (ur.).
Beč: DAAAM International Vienna 2010, 2010. str. 1523-1524 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

47.

Radošević, Marko; Katalinić, Branko; Cesarec, Paulina; Štimac, Sanjin; Barišić, Branimir

Making device for torque initiation which is appliedin torquewrench calibration // Annals of DAAAM for 2010 & Proceedings / Katalinić, Branko (ur.).
Beč: DAAAM International Vienna 2010, 2010. str. 1521-1522 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

48.

Pilvousek, Tomáš; Tatíček, František; Roleček, Lubomír; Barišić, Branimir

The Effect of Strain Rate on the Propreties and Microstructure of the DC 06 Steel // Proceedings of International Conference on Innovative Technologies IN-TECH / Kudlaček, Jan ; Barišić, Branimir ; Velay, Xavier ; Ohkura, Kazuhiro (ur.).
Prag: Tisk AS Jaroměř, 2010. str. 628-637 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

49.

Kudláček, Jan; Chaber, Petr; Barišić, Branimir

New Possibilities of Degreasing Process Evaluation // Proceedings of International Conference on Innovative Technologies IN-TECH / Kudlaček, Jan ; Barišić, Branimir ; Velay, Xavier ; Ohkura, Kazuhiro (ur.).
Prag: Tisk AS Jaroměř, 2010. str. 624-631 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

50.

Szalay, Tibor; Székely, Ferenc; Barišić, Branimir

Some Experimental Results in Moulding of Glass Lenses // International Conference on Innovative Technologies IN-TECH 2010 / Kudlaček, Jan ; Barišić, Branimir ; Velay, Xavier ; Ohkura, Kazuhiro (ur.).
Prag: Tisk AS Jaroměř, 2010. str. 453-462 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

51.

Dražić, Ivan; Mujaković, Nermina; Barišić, Branimir

The Numerical Approximations of the Solution for the Piston Problem With Viscous Compressible Micropolar Fluid // Proceedings of International Conference on Innovative Technologies (IN-TECH) / Kudlaček, Jan ; Barišić, Branimir ; Velay, Xavier ; Ohkura, Kazuhiro (ur.).
Prag: Tisk AS Jaroměř, 2010. str. 375-384 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

52.

Czeslaw, Janusz; Rucki, Miroslaw; Barisic, Branimir

Examinations of Characteristics of Pneumatic Follower for Profile Measurement // Proceedings of International Conference on Innovative Technologies IN-TECH / Kudlaček, Jan ; Barišić, Branimir ; Velay, Xavier ; Ohkura, Kazuhiro (ur.).
Prag: Tisk AS Jaroměř, 2010. str. 197-202 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

53.

Plančak, Miroslav; Barišić, Branimir; Vilotić, Dragiša; Lužanin, Ognjen

Radial Stress in Cold Backward Extrusion: Upper Bound and Analytical Solution // Proceedings of International Conference on Innovative Technologies IN-TECH / Kudlaček, Jan ; Barišić, Branimir ; Velay, Xavier ; Ohkura, Kazuhiro (ur.).
Prag: Tisk AS Jaroměř, 2010. str. 14-19 (pozvano predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

54.

Plančak, Miroslav; Barišić, Branimir; Vilotić, Dragiša; Mladomir, Milutinović; Lužanin, Ognjen

Identification of Stress State in Cold Backward Extrusion of Steel // Proceeding of 7th International Conference on Mechanical Engineering 2010 / Gabor, Stepan (ur.).
Budimpešta: Budapest University of Technology and Economics, Faculty of Mechanical Engineering, 2010. str. 294-300 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

55.

Barišić, Branimir; Rucki, Miroslaw; Čep, Robert; Čepová, Lenka; Náprstková, Natasa

Application of Total Station for Measuring Purpose in Shipbuilding Industry // New Technology Knowledge and Information / Náprstková, Natasa ; Novák, Martin (ur.).
Ústí na Labi: Department of Technology and Material Engineering, Faculty of Production Technology and Management, J.E. Purkyne University in Ústi nad Labem, Czech Republic., 2010. str. 20-28 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

56.

Fulop, Istvan; Gyenge, Csaba; Barišić, Branimir

Some Practical Aspects of Risk Based Maintenance Implementation in Paper Industry // Proceeding of 9th International Conference Modern Technologies In Manufacturing / Gyenge, Csaba (ur.).
Cluj - Napoca: Technical University Of Cluj-Napoca, 2009. str. 95-98 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

57.

Šegan, Danijel; Kršulja, Marko; Barišić, Branimir; Gyenge, Csaba

Flexible Program for Continuos Temperature Monitoring With the Use Of a Thermocouple // Proceeding of 9th International Conference Modern Technologies In Manufacturing / Gyenge, Csaba (ur.).
Cluj - Napoca: Technical University Of Cluj-Napoca, 2009. str. 269-272 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

58.

Lužanin, Ognjan; Plančak, Miroslav; Barišić, Branimir

Gesture Recognition Using Data Glove and Ann-Based Processor // Proceeding of 10th International Scientific Conference MMA 2009 Flexible Technologies / Kovač, Pavel (ur.).
Novi Sad: Univerzitet u Novom Sadu, 2009. str. 214-217 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

59.

Rucki, Miroslaw; Barišić, Branimir; Ocenašova, Lenka

Dynamic Calibration Of Air Gauges // Proceedings of the 13th National & 4th International Conference „Metrology in Production Engineering” / Wieczorowski, Michal (ur.).
Poznań: Agencja Reklamowa COMPRINT, 2009. str. 403-407 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

60.

Kršulja, Marko; Barišić, Branimir; Kudlaček, Jan

Comprehensive Study of Strip Selection and Weld Errors in a Steel Tube Erw Welding Process // The 20th INTERNATIONAL DAAAM SYMPOSIUM / Katalinić, Branko (ur.).
Beč: DAAAM International Vienna, 2009. str. 683-684 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

61.

Ocenašova, Lenka; Gapinski, Bartosz; Čep, Robert; Gregova, Linda; Barišić, Branimir; Novakova, Jana; Petrkovska, Lenka

Roundness Deviation Measuring Strategy at Coordination Measuring Machines and Conventional Machines // Proceedings of World Academy of Science, Engineering and Technology-WCSET 2009: "World Congress on Science, Engineering and Technology 2009" / Ardil, Cemal (ur.).
Singapur: World Academy of Science, Engineering and Technology, 2009. str. 629-632 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

62.

Čep, Robert; Ocenašova, Lenka; Novakova, Jana; Kouril, Karel; Valicek, Jan; Branimir Barišić

Influence of Thermal and Mechanical Shocks to Cutting Edge Tool Life // Proceedings of World Academy of Science, Engineering and Technology-WCSET 2009: "World Congress on Science, Engineering and Technology 2009" / Ardil, Cemal (ur.).
Singapur: World Academy of Science, Engineering and Technology, 2009. str. 754-757 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

63.

Barišić, Branimir; Plancak, Miroslav; Nastran, Miha

Computer Aided Development of Forming Technologies For Tool Holder Module Production // 7. International Conference on Industrial Tools and Material Processing Technologies / Gasper, Gantar (ur.).
Celje: TECOS-Slovenian Tool and Die Development Centre, 2009. str. 283-287 (pozvano predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

64.

Dražić, Ivan; Barišić, Branimir; Jurasić, Katica

Modeling of orthoptic curve associated to couple of circles // Progressive Methods in Manufacturing Technologies / Stančekova, Dana (ur.).
Žilina: Scientific-technical society by University of Zilina and Department of Machining and Manufacturing Engineering, 2009. str. 21-24 (ostalo, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

65.

Barišić, Branimir; Mamuzić, Ilija; Čep, Robert

Production Supported by Combination of Different Software in Sheet Metal Forming // Management of Technology – Step to Sustainable Production / Čosić, Predrag (ur.).
Zagreb, 2009. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

66.

Plančak, Miroslav; Vilotić, Dragiša; Barišić, Branimir; Movrin, Dejan; Pepelnjak, Tomaž

Die Stressing in Forward Cold Extrusion of Low Carbon Steel // Proceeding of 20th International Conference on Production Research / Ming, Li (ur.).
Shanghai: International Foundation for Production Research (IFPR), 2009. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

67.

Čep, Robert; Sadilek, Marek; Ocenašova, Lenka; Brychta, Josef; Hatala, Michal; Barišić, Branimir

Testing of DISAL D240 and D420 Ceramic Tool Materials with an Interrupted Cut Simulator // Proceedings of World Academy of Science, Engineering and Technology-ICME 2009:"International Conference on Mechanical Engineering" / Brojack, B. (ur.).
Tokyo: World Academy of Science, Engineering and Technology, 2009. str. 334-350 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

68.

Vilotić, Dragiša; Plančak, Miroslav; Movrin, Dejan; Milutinović, Mladomir; Barišić, Branimir

Theoretical and FE analysis of Contact Stresses at Upsetting of Prismatic Specimen by Cylindrical Dies // Proceeding of 22. MicroCAD International Scientific Conference / Lehoczky Laszlo (ur.).
Miskolc: University of Miskolc, 2009. str. 65-71 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

69.

Car, Zlatan; Barišić, Branimir; Kršulja, Marko

Creating Virtual Models of Production Equipment For Simulation of a Manufacturing Process System // 10th International Scientific Conference, Automation in Production Planning and Manufacturing / Kuric, Ivan (ur.).
Žilina: University of Žilina, Faculty of Mechanical Engineering, 2009. str. 38-44 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

70.

Barišić, Branimir; Čep, Robert; Legutko, Stanislav

Modelling of a Complex Product-Shaker by means of Solidworks Software // Procedings of International Conference ERIN 2009 / P. Milčak ; Robert, Čep ; Jana, Novakova (ur.).
Ostrava: Technical University of Ostrava, Faculty of Mechanical Engineering, 2009. str. 1-9 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

71.

Barišić, Branimir; Kršulja, Marko

Measurement Technique and E-enviroment // EQIBELT( Education Quality Improvement by E-learning Technology), Workshop 3rd Policy workshop on pedagogical opportunities of E-learning, Workshop on earning support centres, Workshop on course in E-Learning enviroment / Bekić, Zoran ; Kučina Softić, Sandra (ur.).
Rijeka: University Of Zagreb, University Computing Centre Srce, 2008. str. 283-288 (pozvano predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

Pristup cjelovitom tekstu rada

72.

Wierczorowski, Kazimier; Legutko, Stanislav; Barišić, Branimir

Spotters Wear Investigation // Proceeding of International Symposium ‘ ’ Progresive Methods in Manufacturing Technologies’ ’ / Stančekova, dana (ur.).
Žilina: Scientific-Tehnical Society University of Zilina, 2008. str. 118-122 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

73.

Kršulja, Marko; Barišić, Branimir; Kudlaček, Jan

Locating, Study of a Workholding Solution // Proceedings 2008, 6th International conference on Computer Aided Design and Manufacturing / Obsieger Boris (ur.).
Rijeka: Zigo, 2008. str. 31-32 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

74.

Kršulja, Marko; Barišić, Branimir; Car, Zlatan

Considerations and Use of the Genetic Algorithm in Optimization of Standard Fixture Components // The 19th International DAAAM SYMPOSIUM "Intelligent Manufacturing & Automation: Focus on Next Generation of Intelligent Systems and Solutions" / Katalinić, Branko (ur.).
Beč: DAAAM International Vienna, 2008. str. 731-732 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

75.

Barišić, Branimir; Kuric, Ivan; Legutko, Stanislaw

Lüders’ Bands And Hall-Patch Equation // Proceedings of the International Conference System-Equipment-Processes SOP 2008 / Jan Duda (ur.).
Krakov: Cracow University of Technology, 2008. str. 11-18 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

76.

Hrivnak, Radovan; Barišić, Branimir; Bečka, Jan

The Contactless Scanning of Objects-Virtual 3D Model Creating // Proceedings of the International Conference System-Equipment-Processes SOP 2008 / Jan Duda (ur.).
Krakov: Cracow University of Technology, 2008. str. 128-132 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

77.

Car, Zlatan; Barišić, Branimir; Sladic, Saša

GA Based Design and Production Planing // Proceedings of the 9th International Scientific Conference ” New Ways in Manufacturing Technologies” / Karol Vasilko (ur.).
Prešov: Technical University Kosiciach, 2008. str. 15-19 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

78.

Ungureanu, Nicolae; Barišić, Branimire; Ungureanu, Miorita

Logistics and Maintenance Activities // Proceedings of the International Conference System-Equipment-Processes SOP 2008 / Jan Duda (ur.).
Krakov: Cracow University of Technology, 2008. str. 412-416 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

79.

Sladić, Saša; Car, Zlatan; Barišić, Branimir

Evolutionary Based Production Planning // Proceedings of 9th International Scientific Conference "Automation in Production Planning and Manufacturing" / Ivan Kuric (ur.).
Žilina: University of Zilina, 2008. str. 252-258 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

80.

Rucki, Miroslaw; Barišić, Branimir

Improvement of Air Gauges Metrological Properties through Constructional Changes // Proceedings of the 2nd International Scientific Conference New Technology Knowledge and Information / Novak Martin (ur.).
Ústí na Labi: University J. E. Purkyne-Usti nad Labem, 2008. str. 120-122 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

81.

Miroslaw, Rucki; Branimir, Barišić; Zofia, Jaskolska

Dimensional Inspection Systems Based on Air Gauges // Proceedings of the 9th Biennial ASME Conference on Engineering Systems Design and Analysis
Haifa: ASME Technical Publishing Department, 2008. str. 1-6 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

82.

Dražić, Ivan; Barišić, Branimir; Mujaković, Nermina

The implementation of iterative outer approximation method for elasto-plastic torsion problem // Progressive Methods in Manufacturing Technologies / Stančekova, Dana (ur.).
Žilina: Scientific-technical society by University of Zilina and Department of Maching and Automation, 2008. str. 11-15 (ostalo, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

83.

Gyenge, Csaba; Barišić, Branimir; Boca, Valentin

The Analyse of Contact Contour and the Relative Spiral Feed During Orbital Deformation // Proceedings of the 8th International Conference „ Modern Technologies in manufacturing” MTeM / Gyenge Csaba (ur.).
Cluj - Napoca: MTeM, 2007. str. 179-183 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

84.

Balc, Nicolae; Berce, Petru; Pacurar, Razvan; Barišić, Branimir

Using the CAD Compensation Factors to Improve the Accuracy of the SLS Parts // Proceedings of the 8th International Conference „ Modern Technologies in manufacturing” / Gyenge Csaba (ur.).
Cluj - Napoca: MTeM, 2007. str. 42-48 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

85.

Kršulja, Marko; Barišić, Branimir; Sladić, Saša

Optimization of Deformation for Milling Operation Using 3-2-1 Clamping Method // Proceedings of the 12th International DAAAM Workshop CA Systems and Technologies / Katalinic Branko ; Kuric Ivan (ur.).
Beč: UŽ-Faculty of Mechanical Engineering, 2007. str. 97-104 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

86.

Barišić, Branimir; Rucki, Miroslaw; Čalić, Bruno; Gomerčić, Mladen

The Measuring Comparison between Nocontact Digitizing System and Contact Coordinate Measuring System // Proceedings of the 9th International Conference on Management of Innovative Technologies / Junkar Mihael (ur.).
Piran: TAVO Slovene Society for Abrasive Water Jet Technology, 2007. str. 144-151 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

87.

Barišić, Branimir; Sladić, Saša; Soković, Mirko

Numerical Approach for DC 01 Sheet Metal Drawer Forming // Proceedings of the 10th Advances in Materials and Processing Technologies / Im. Y. T ; M. S. J. Hashmi (ur.).
Daejeon: by Korea Advanced Institute of Science and Technology-KAIST, 2007. str. 629-639 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

88.

Barišić, Branimir; Gyenge, Csaba; Balc, Nicolae

Production Philosophy for Modern Manufacturing on Trumph Trumatic Presses in Computer Environment // Proceedings of the 8th International Conference „ Modern Technologies in manufacturing” MTeM / Gyenge Csaba (ur.).
Cluj - Napoca: MTeM, 2007. str. 47-52 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

89.

Barišić, Branimir; Car, Zlatan; Kuzman, Karl

Evaluation of Different Analytic Models Accuracy at Backward Extrusion Force on AlCu5PbBi // Proceedings of the 12th International Conference On Tools ICT-2007 / Dudas Illes, Szabo Otto, Varga Gyula (ur.).
Miskolc: Department of Production Engineering-University of Miskolc, 2007. str. 287-293 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

90.

Dusevic, Hrvoje: Car, Zlatan: Barišić, Branimir

Machining Center Efficiency Optimization Using Artificial Intelligence // Annals of DAAAM for 2007 & Proceedings of the 18th International DAAAM Symposium / B. Katalinic (ur.).
Beč: DAAAM International Vienna, 2007. str. 132-133 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

91.

Barišić, Branimir; Car, Zlatan; Nastran Miha

Numerical Strategy for Ust 13 Sheet Metal DVD Holder Production // 6th International Conference on Industrial Tools and Materials Processing Technologies / Kuzman, Karl (ur.).
Celje: TECOS, 2007. str. 337-343 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

1.

Zlatan Car

Relationship between University and Industry: partners in education and business // 2nd Regional Conference “Supercomputing Applications in Science and Industry” / Stanislav Markov (ur.).
Sofija, 2011. str. 50-55 (pozvano predavanje, međunarodna recenzija, cjeloviti rad (in extenso), ostalo)

1.

Kršulja, Marko

Unaprjeđenje procesa inkrementalnog preoblikovanja u jednoj točki, 2013., doktorska disertacija, Tehnički fakultet, Rijeka

Pristup cjelovitom tekstu rada

1.

Svetličić, Branimir

Izrada konstrukcijskog rješenja automatizirane stezne naprave, 2012., diplomski rad, diplomski, Tehnički Fakultet, Rijeka

2.

Domitrović, Štefanija

Redizajn tri-osne glodalice u višeosnu, 2012., diplomski rad, preddiplomski, Tehnički Fakultet, Rijeka

3.

Kostanjevac, Danijel

Dizajn alata za duboko vučenje, 2012., diplomski rad, preddiplomski, Tehnički Fakultet, Rijeka

4.

Ovčar, Nikola

Dizajn stezne naprave kučišta turbo puhala, 2012., diplomski rad, preddiplomski, Tehnički Fakultet, Rijeka

5.

Simčić, Renato

Izrada konstrukcijskog rješenja robotskog sustava za manipulaciju, 2012., diplomski rad, diplomski, Tehnički Fakultet, Rijeka

6.

Perčić, Katja

Dizajn alata za brizganje, 2012., diplomski rad, preddiplomski, Tehnički Fakultet, Rijeka

7.

Licul, Mauro

Usavršavanje mjernog plana kućišta turbokompresora, 2012., diplomski rad, preddiplomski, Tehnički Fakultet, Rijeka

8.

Ljubotina, Alen

Montiranje momenta pritezanja vijka za spoj brodskog vitla, 2012., diplomski rad, diplomski, Tehnički Fakultet, Rijeka

9.

Banko, Dorian

Optimizacija putanje alata pomoću genetskog algoritma, 2012., diplomski rad, preddiplomski, Tehnički Fakultet, Rijeka

10.

Zubović, Josip

Mjerenje točnosti i ponovljivosti pobotske ruke, 2012., diplomski rad, Tehnički Fakultet, Rijeka

11.

Pašić, Milorad

Mjerenje brzine vrtnje obradnih strojeva, 2011., diplomski rad, diplomski, Tehnički fakultet, Rijeka

12.

Mofardin, Ivan

Analiza i implementacija naprednih sustava za grafičku simulaciju i programiranje CNC strojeva, 2011., diplomski rad, Tehnički Fakultet, Rijeka

13.

Drašković, Luka

Izrada virtualnog modela i simulacija rada radnika u proizvodnji, 2011., diplomski rad, diplomski, Tehnički fakultet Rijeka, Rijeka

14.

Šimon, Joško

Izrada konstrukcijskog rješenja stroja zasnovanog na paralelnoj kinematici, 2011., diplomski rad, preddiplomski, Tehnički fakultet Rijeka, Rijeka

15.

Hasković, Damir

Izrada virtualnog modela i simulacija proizvodnog pogona, 2011., diplomski rad, diplomski, Tehnički fakultet, Rijeka

16.

Bucić, Antonio

Upravljanje i kooperacija dvije robotske ruke, 2011., diplomski rad, diplomski, Tehnički Fakultet, Rijeka

17.

Petrač, Edi

Izrada i primjena robotske ruke za manipulaciju malih obradaka, 2011., diplomski rad, diplomski, Tehnički Fakultet, Rijeka

18.

Uravić, Valter

Mjerenje obujma spremnika, 2011., diplomski rad, preddiplomski, Tehnički Fakultet, Rijeka

19.

Bogović, Iva-Nicol

Mjerenje kućišta turbokompresora na digitalizacijskom sustavu Atos, 2011., diplomski rad, preddiplomski, Tehnički Fakultet, Rijeka

20.

Hodak, Marko

Mjerenje ravnosti kućišta za filter ulje, 2011., diplomski rad, preddiplomski, Tehnički Fakultet, Rijeka

21.

Omeragić, Marko Jasmin

Mjerenje osvjetljenosti pored strojeva/radnih mjesta, 2011., diplomski rad, Tehnički fakultet, Rijeka

22.

Božić, Denis

Mjerenje nosača alternatora na Trokoordinatnom mjernome stroju Gage max 755 navigator, 2011., diplomski rad, preddiplomski, Tehnički fakultet, Rijeka

23.

Lovreković, Robert

Implementacija servoupravljanja korištenjem open-source tehnologije i CAN sučelja, 2010., diplomski rad, preddiplomski, Tehnički Fakultet, Rijeka

24.

Šimunčić Tibor

Razvoj virtualnog modela robota za OFF-Line programiranje ABB serije robota, 2010., diplomski rad, preddiplomski, Tehnički Fakultet, Rijeka

25.

Tomljanović Marko

Izrada modela kompleksne kinematske strukture robota i primjena u EMC2 upravljačkom programu, 2010., diplomski rad, preddiplomski, Tehnički Fakultet, Rijeka

26.

Maračić, Borna

Umjeravanje neautomatskih mjerila za vaganje, 2010., diplomski rad, diplomski, Tehnički fakultet, Rijeka

27.

Maksim, Ćirić

Modeliranje i simulacija proizvodnih sustava, 2010., diplomski rad, Tehnički fakultet, Rijeka

28.

Albert, Mjeda

Umjeravanje uređaja za istakanje tekućih goriva i plinova, 2010., diplomski rad, Tehnički fakultet, Rijeka

29.

Miljenko, Jurasić

Primjena Totalnih stanica za kontrolu kranskih staza, 2010., diplomski rad, Tehnički fakultet, Rijeka

30.

Emir, Vehabović

Mjerenje i kontrola tehničkih karakteristika prozora prema HRN EN 14351-1, 2010., diplomski rad, preddiplomski, Tehnički fakultet, Rijeka

31.

Poje, Dražen

Izrada okvira Combi Electra 100 R-50 tehnologijom oblikovanja deformiranjem, 2010., diplomski rad, diplomski, Tehnički fakultet, Rijeka

32.

Štimac, Sanjin

Mjerno rješenje određivanje sile i momenta automatiziranog procesa zatvaranja medicinskih bočica, 2010., diplomski rad, diplomski, Tehnički fakultet, Rijeka

33.

Lazanja, Kristijan

Mjerna kontrola i mjerenje na vagi za brojanje PCE - CBS 15, 2010., diplomski rad, diplomski, Tehnički fakultet, Rijeka

34.

Radošević, Marko

Umjeravanje moment ključeva pomoću Burster mjernog sustava, 2010., diplomski rad, diplomski, Tehnički fakultet, Rijeka

35.

Proleta, Danijel

Spektrometrijska mjerenja strukture ambalažnog lima, 2010., diplomski rad, preddiplomski, Tehnički fakultet, Rijeka

36.

Novković, Duško

Izrada podizne platforme uz podršku programskog paketa Solidworks korištenjem tehnologije obrade deformiranjem, 2010., diplomski rad, diplomski, Tehnički fakultet, Rijeka

37.

Lazanja, Matej

Mjerna kontrola točnosti CNC glodalice pomoću Ballbar QC10 sustava, 2010., diplomski rad, diplomski, Tehnički fakultet, Rijeka

Pregled po projektu: Numeričko modeliranje, simulacija i optimizacija u oblikovanju lima (MB: MZOS-069-1201787-1754)

Knjige i poglavlja u knjigama

Autorske knjige

Uredničke knjige

Radovi u časopisima

Znanstveni i pregledni radovi

Stručni radovi

Drugi radovi u časopisima

Radovi u zbornicima skupova

Znanstveni radovi u zbornicima skupova

Drugi radovi u zbornicima skupova

Ocjenski radovi

Doktorske disertacije

Diplomski radovi (uključujući i diplomske radove starog programa)