Pregled po projektu: Numeričko modeliranje, simulacija i optimizacija u oblikovanju lima (MB: MZOS-069-1201787-1754)
Pronađeno 235 radova
-
201.Cep, Robert; Barišić, BranimirTesting of Ceramic Cutting Tools with an Interrupted Cut Simulator // Engineering Review, 28 (2008), 1; 11-16 (podatak o recenziji nije dostupan, izvorni znanstveni rad, znanstveni)
-
202.Rucki, Miroslaw; Barišić, BranimirImprovement of Air Gauges Metrological Properties through Constructional Changes // Proceedings of the 2nd International Scientific Conference New Technology Knowledge and Information / Novak Martin (ur.).
Ústí na Labi: University J. E. Purkyne-Usti nad Labem, 2008. str. 120-122 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
203.Miroslaw, Rucki; Branimir, Barišić; Zofia, JaskolskaDimensional Inspection Systems Based on Air Gauges // Proceedings of the 9th Biennial ASME Conference on Engineering Systems Design and Analysis
Haifa: ASME Technical Publishing Department, 2008. str. 1-6 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
204.Dražić, Ivan; Barišić, Branimir; Mujaković, NerminaThe implementation of iterative outer approximation method for elasto-plastic torsion problem // Technologické inžinierstvo / Technological engineering, 5 (2008), 1; 37-39 (podatak o recenziji nije dostupan, članak, znanstveni)
-
205.Dražić, Ivan; Barišić, Branimir; Mujaković, NerminaThe implementation of iterative outer approximation method for elasto-plastic torsion problem // Progressive Methods in Manufacturing Technologies / Stančekova, Dana (ur.).
Žilina: Scientific-technical society by University of Zilina and Department of Maching and Automation, 2008. str. 11-15 (ostalo, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
206.Barišić, Branimir; Pepelnjak, Tomaz; Math, MiljenkoPredicting of the Lueders bands in the processing of TH material in computer environment by means of stochastic modeling // Journal of Materials Processing Technology, 203 (2008), 1-3; 154-165 doi:10.1016/j.jmatprotec.2007.09.054 (međunarodna recenzija, članak, znanstveni)
-
207.Ungeruanu, Nicolae; Barišić, Branimir; Ungeruanu, MioritaConsideration about Reliability of Gears // CA systems in production process planning, 9 (2008), 1; 77-80 (podatak o recenziji nije dostupan, članak, znanstveni)
-
208.Sladić, Saša; Barišić, Branimir; Soković, MirkoCost-Effective Power Converter for Thin Film Solar Cell Technology and Improved Power Quality // Journal of Materials Processing Technology, 201 (2008), 1-3; 786-792 doi:10.1016/j.jmatprotec.2007.11.161 (međunarodna recenzija, članak, znanstveni)
-
209.Barišić, Branimir; Rucki, Miroslaw; Car, ZlatanAnalysis of Digitizing and Traditional Measuring System at Surface Measurement of Lids // Key Engineering Materials, 381-382 (2008), 217-221 (podatak o recenziji nije dostupan, izvorni znanstveni rad, znanstveni)
-
210.Plancak, Miroslav; Barišić, Branimir; Grizelj, BrankoDifferent Possibilities of Process Analysis in Cold Extrusion // Key Engineering Materials, 367 (2008), 209-215 (podatak o recenziji nije dostupan, izvorni znanstveni rad, znanstveni)
-
211.Grizelj, Branko; Plančak, Miroslav; Barišić, BranimirNumerical Simulation of Combined Forward-Backward Extrusion // Key Engineering Materials, 367 (2008), 193-201 (podatak o recenziji nije dostupan, izvorni znanstveni rad, znanstveni)
-
212.Barišić, Branimir; Grizelj, Branko; Plancak, MiroslavModeling Approach for Determination of Backward Extrusion Strain Energy on AlCu5PbBi // Key Engineering Materials, 367 (2008), 221-230 (podatak o recenziji nije dostupan, izvorni znanstveni rad, znanstveni)
-
213.Rucki, Miroslaw; Barišić, Branimir; Szalay, TiborAnalysis of Air Gage Inaccuracy Caused by Flow Instability // Measurement, 41 (2008), 6; 655-661 doi:10.1016/j.measurement.2007.10.001 (međunarodna recenzija, članak, znanstveni)
-
214.Šikulec, LeonPrimjena PLM sustava za simulaciju i upravljanje proizvodnog sustava, 2007., diplomski rad, Tehnički fakultet, Rijeka
-
215.Dušević HrvojeOptimizacija iskoristivosti obradnog centra pomoću umjetne inteligencije, 2007., diplomski rad, Tehnički Fakultet, Rijeka
-
216.Džambas, IgorUvođenje CAE sustava pri automatizaciji rada obradnih strojeva, 2007., diplomski rad, Tehnički Fakultet, Rijeka
-
217.Brletić, GoranIzrada virtualnih modela proizvodne opreme za simulaciju proizvodnih procesa sustava, 2007., diplomski rad, Tehnički Fakultet, Rijeka
-
218.Meštrović IvanPrimjena evolucijskog algoritma za dizajn proizvodnoga pogona, 2007., diplomski rad, Tehnički Fakultet, Rijeka
-
219.Sergej, HorvatIZRADA UPRAVLJAČKOG ALGORITMA ROBOTA U ZATVORENOME PROSTORU PRIMJENOM NEURALNE MREŽE, 2007., diplomski rad, diplomski, tehnički fakultet, Rijeka
-
220.Pauletić, NenadIzrada stalka upravljačke ploče tehnologijom oblikovanja deformiranjem, 2007., diplomski rad, Tehnički fakultet, Rijeka
-
221.Gyenge, Csaba; Barišić, Branimir; Boca, ValentinThe Analyse of Contact Contour and the Relative Spiral Feed During Orbital Deformation // Proceedings of the 8th International Conference „ Modern Technologies in manufacturing” MTeM / Gyenge Csaba (ur.).
Cluj - Napoca: MTeM, 2007. str. 179-183 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
222.Balc, Nicolae; Berce, Petru; Pacurar, Razvan; Barišić, BranimirUsing the CAD Compensation Factors to Improve the Accuracy of the SLS Parts // Proceedings of the 8th International Conference „ Modern Technologies in manufacturing” / Gyenge Csaba (ur.).
Cluj - Napoca: MTeM, 2007. str. 42-48 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
223.Kršulja, Marko; Barišić, Branimir; Sladić, SašaOptimization of Deformation for Milling Operation Using 3-2-1 Clamping Method // Proceedings of the 12th International DAAAM Workshop CA Systems and Technologies / Katalinic Branko ; Kuric Ivan (ur.).
Beč: UŽ-Faculty of Mechanical Engineering, 2007. str. 97-104 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
224.Barišić, Branimir; Rucki, Miroslaw; Čalić, Bruno; Gomerčić, MladenThe Measuring Comparison between Nocontact Digitizing System and Contact Coordinate Measuring System // Proceedings of the 9th International Conference on Management of Innovative Technologies / Junkar Mihael (ur.).
Piran: TAVO Slovene Society for Abrasive Water Jet Technology, 2007. str. 144-151 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
225.Barišić, Branimir; Sladić, Saša; Soković, MirkoNumerical Approach for DC 01 Sheet Metal Drawer Forming // Proceedings of the 10th Advances in Materials and Processing Technologies / Im. Y. T ; M. S. J. Hashmi (ur.).
Daejeon: by Korea Advanced Institute of Science and Technology-KAIST, 2007. str. 629-639 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
226.Barišić, Branimir; Gyenge, Csaba; Balc, NicolaeProduction Philosophy for Modern Manufacturing on Trumph Trumatic Presses in Computer Environment // Proceedings of the 8th International Conference „ Modern Technologies in manufacturing” MTeM / Gyenge Csaba (ur.).
Cluj - Napoca: MTeM, 2007. str. 47-52 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
227.Barišić, Branimir; Car, Zlatan; Kuzman, KarlEvaluation of Different Analytic Models Accuracy at Backward Extrusion Force on AlCu5PbBi // Proceedings of the 12th International Conference On Tools ICT-2007 / Dudas Illes, Szabo Otto, Varga Gyula (ur.).
Miskolc: Department of Production Engineering-University of Miskolc, 2007. str. 287-293 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
228.Rucki, Miroslaw; Barišić, BranimirImprovement of Air Gauges Metrological Properties through Constructional Changes // Strojírenská technologie, 5 (2007), XII; 199-203 (podatak o recenziji nije dostupan, izvorni znanstveni rad, znanstveni)
-
229.Pauletić, Nenad; Barišić, Branimir; Kršulja, MarkoControll Board Stand for TRUMPF Presses Manufacturing by Metal Forming Aplication // Engineering Review, 27 (2007), 2; 103-112 (podatak o recenziji nije dostupan, prethodno priopćenje, znanstveni)
-
230.Szelewski, Maciej; Grzelka, Miroslaw; Barišić, BranimirFree Surface Scanning with CMM and its Reproduction in CAD System // Engineering Review, 27 (2007), 1; 7-13 (podatak o recenziji nije dostupan, članak, znanstveni)
-
231.Dusevic, Hrvoje: Car, Zlatan: Barišić, BranimirMachining Center Efficiency Optimization Using Artificial Intelligence // Annals of DAAAM for 2007 & Proceedings of the 18th International DAAAM Symposium / B. Katalinic (ur.).
Beč: DAAAM International Vienna, 2007. str. 132-133 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
232.Barišić, Branimir; Car, Zlatan; Nastran MihaNumerical Strategy for Ust 13 Sheet Metal DVD Holder Production // 6th International Conference on Industrial Tools and Materials Processing Technologies / Kuzman, Karl (ur.).
Celje: TECOS, 2007. str. 337-343 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
233.Pepelnjak, Tomaž; Barišić, BranimirAnalysis and elimination of the stretcher strains on TH415 tinplate rings in the stamping process // Journal of Materials Processing Technology, 186 (2007), 1-3; 111-119 (međunarodna recenzija, članak, znanstveni)
-
234.Grizelj, Branko; Barišić, Branimir; Math, MiljenkoFEM in Plate Bending // Key Engineering Materials, 344 (2007), -; 269-276 (podatak o recenziji nije dostupan, izvorni znanstveni rad, znanstveni)
-
235.Barišić, Branimir; Math, Miljenko; Grizelj, BrankoAnalytic, Numerical, And Stochastic Comparison Of Forming Force Modeling At Deep Drawing And Backward Extrusion On The Same Al 99.5 F7 Parts // Key engineering materials, 344 (2007), 419-426 doi:10.4028/www.scientific.net/KEM.344.419 (međunarodna recenzija, članak, znanstveni)
