Pregled po projektu: 120009
Pronađeno 109 radova
-
1.Kirola, MarijoComparative study of controllers for autonomous mobile robot // Procedings of the 15th International DAAAM Symposium / Katalinić, Branko (ur.).
Beč: DAAAM International Vienna, 2004. str. 211-212 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
2.Novaković, Branko; Novaković, Dario; Novaković, AlenA new Approach to Unification of Potential Fields Using GLT Model // International Journal of Computing Anticipatory Systems, 11 (2002), 196-211 (podatak o recenziji nije dostupan, članak, znanstveni)
-
3.Rastović, DaniloFeedback stabilization of some classes of nonlinear transport systems // Rendiconti del Circolo Matematico di Palermo, 51 (2002), -; 325-332 (međunarodna recenzija, članak, znanstveni)
-
4.Kirola, MarijoFuzzy Logic Control (FLC) for Autonomous Mobile Robot // Proceedings of the 13th International DAAAM Symposium / Katalinic, Branko (ur.).
Beč: DAAAM International Vienna, 2002. str. 263-264 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
5.Kirola, MarijoSinteza neizrazitog regulatora za mobilni robot, 2002., magistarski rad, Fakultet strojarstva i brodogradnje, Zagreb
-
6.Novaković, Branko; Novaković, Dario; Novaković, AlenA new Approach to Unification of Potential Fields Using GLT Model // Anticipation, Incursion, Logics, and Epistemology ; Physical, Quantum, and Relativist Systems ; Mathematical Systems and Anticipatory Engineering : Partial Proceedings of the Fifth International Conference CASYS'01 on Computing Anticipatory Systems ; u: International Journal of Computing Anticipatory Systems (ISSN 1373-5411) 11 (2002) / Dubois, Daniel M. (ur.).
Liege: CHAOS, 2002. str. 3.7-3.8 (pozvano predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
7.Kasać, Josip; Brezak, Danko; Majetić, Dubravko; Novaković, BrankoMobile Robot Path Planing Using Gauss Potential Functions and Neural Network : Chapter 30 // DAAAM International Scientific Book 2002 / Katalinić, Branko (ur.).
Beč: DAAAM International Vienna, 2002. str. 287-298 -
8.Šitum, Željko; Novaković, Branko; Petrić, JoškoIdentification and Control of Pneumatic Servodrives // Proceedings of the 9th Mediterranean Conference on Control and Automation / Vukić, Zoran ; Valavanis, Kimon (ur.).
Zagreb: FER, Zagreb, 2001. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
9.Rastović, DaniloA note on path connected transport systems // Mathematica Montisnigri, 13 (2001), 1-2; 167-174 (međunarodna recenzija, članak, znanstveni)
-
10.Šitum, ŽeljkoRegulacija pneumatskih servosustava primjenom neizrazitog regulatora, 2001., doktorska disertacija, Fakultet strojarstva i brodogradnje, Zagreb
-
11.Novaković, Branko; Novaković, Dario; Novaković, AlenA new Approach to Unification of Potential Fields Using GLT Model // CASYS'01-Absract Book / Dubois, Daniel M. (ur.).
Liege: CHAOS, Liege, Belgium, 2001. (predavanje, međunarodna recenzija, sažetak, znanstveni) -
12.Novaković, BrankoSuradnja FSB-a i gospodarstva // Suradnja znanosti i gospodarstva
Zagreb, Hrvatska, 2001. (predavanje, neobjavljeni rad, pregledni) -
13.Šitum, Željko; Novaković, Branko; Petrić, JoškoPneumatic Servodrives Control Using on/off Solenoid Valves // CIM-2001, 7th International Scientific Conference on Production Engineering / Cebalo, Roko; Herbert, Schulz (ur.).
Zagreb: Hrvatska udruga proizvodnog strojarstva, 2001. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
14.Novaković, Branko; Novaković, Dario; Novaković, AlenA Metric Tensor of the New General Lorentz Transformation Model // International Journal of Computing Anticipatory Systems, 10 (2001), 10; 199-217 (međunarodna recenzija, članak, znanstveni)
-
15.Kasać, Josip; Novaković, BrankoOptimal Robot Control with Unspecified Initial and Final Conditions // Proceedings of 9th Mediterranean Conference on Control and Automation
Zagreb: Hrvatsko društvo za komunikacije, računarstvo, elektroniku, mjerenja I automatiku (KoREMA), 2001. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
16.Kasać, Josip; Novaković, BrankoNeural Network Application to Optimal Control of Nonlinear Systems // Computer Aided Optimum Design of Structures VII / Hernandes, S. ; Brebbia, C.A. (ur.).
Southampton : Boston (MA): Wessex Institute of Technology Press, 2001. -
17.Kasać, Josip; Novaković, BrankoOptimal Feedback Control of Nonlinear Systems with Control Vector Constraints // Strojarstvo, 43 (2001), 4-6; 133-141 (međunarodna recenzija, članak, znanstveni)
-
18.Kirola, Marijo; Brezak, Danko; Majetić, DubravkoNeural Network in the Autonomous Mobile Robot Path Tracking Control // Proceedings of the 12th International DAAAM Symposium / Katalinic, Branko (ur.).
Beč: DAAAM International Vienna, 2001. str. 223-224 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
19.Rastović, DaniloOn simulation orbit and growth order of C semigroups // Advances in modelling and analysis. A, 37 (2000), 3-4; 35-40 (podatak o recenziji nije dostupan, članak, znanstveni)
-
20.Novaković, Branko; Novaković, DarioA New Structure of Discrete Time Neural Networks // Computational Methods for Smart Structures and Materials / Brebbia, C. A. ; Samartin, A. ; Galvez, S. V. (ur.).
Southampton: Wessex Institute of Technology Press, 2000. str. X35-X44 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
21.Novaković, Branko; Novaković, Dario; Novaković, AlenA Metric Tensor of the New General Lorentz Transformation Model // CASYS'2000 - Fourth International Conference on Computing Anticipatory Systems / Dubois, Daniel M. (ur.).
Liege: CHAOS asbl, University of Liege, 2000. str. 3.11-3.12 (pozvano predavanje, međunarodna recenzija, sažetak, znanstveni) -
22.Novaković, Branko; Novaković, Dario; Novaković, AlenA New General Lorentz Transformation Model // Computing Anticipatory Systems / Dubois, Daniel M. (ur.).
Melville (NY): American Institute of Physics (AIP), 2000. str. 437 - 450 -
23.Deur, Joško; Schwartz, Sam; Asgari, Jahan; Hrovat, DavorTemperature control system for fuel cell electric vehicle cooling circuit, 2000. (podatak o recenziji nije dostupan, ostalo).
-
24.Deur, Joško; Asgari, Jahan; Schwartz, Sam; Hrovat, DavorTemperature Control of Fuel Cell Electric Vehicle Cooling Circuit including Compensation of Nonlinear Effects and Disturbances, 2000. (podatak o recenziji nije dostupan, izvještaj).
-
25.Deur, Joško; Asgari, Jahan; Hrovat, DavorModeling and Analysis of CD4E Power Train for Park/Reverse Engagement - Part II: Nonlinear Case including Validation, 2000. (podatak o recenziji nije dostupan, izvještaj).
-
26.Deur, Joško; Asgari, Jahan; Hrovat, DavorModeling and Analysis of CD4E Power Train for Park/Reverse Engagement - Part I: Linear Case, 2000. (podatak o recenziji nije dostupan, izvještaj).
-
27.Deur, Joško; Asgari, Jahan; Hrovat, DavorModeling and Analysis of Longitudinal Tire Dynamics, 2000. (podatak o recenziji nije dostupan, izvještaj).
-
28.Deur, Joško; Asgari, Jahan; Hrovat, DavorModeling of CD4E Planetary Gear Set Based on Karnopp Model for Clutch Friction, 2000. (podatak o recenziji nije dostupan, izvještaj).
-
29.Deur, Josko; Hrovat, Davor; Fodor, Michael G.Calculation of Virtual Seat Track Acceleration Based on the Roll Acceleration Measurement, 2000. (podatak o recenziji nije dostupan, izvještaj).
-
30.Deur, Joško; Asgari, Jahan; Hrovat, DavorTemperature Control System for Fuel Cell Electric Vehicle Cooling Circuit, 2000. (podatak o recenziji nije dostupan, izvještaj).
-
31.Deur, Joško; Perić, NedjeljkoA Comparative Study of Servosystems with Acceleration Feedback // 35th IEEE Industry Applications Conference / Fred C. Trutt (ur.).
Piscataway (NJ): Institute of Electrical and Electronics Engineers, Inc., 2000. str. Vol 2, pp. 1533-1540 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
32.Car, Miroslav; Majetić, Dubravko; Brezak, DankoNeural Networks Prediction of Learning Phenomena in Manufacturing // 11th International DAAAM Symposium "Intelligent Manufacturing & Automation : Man - Machine - Nature" / Katalinić, Branko (ur.).
Beč: DAAAM International Vienna, 2000. str. 063-064 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
33.Brezak, Danko; Novaković, Branko; Majetić, DubravkoContribution to the Combined Learning Algorithm for RBF Neural Network // 11th International DAAAM Symposium "Intelligent Manufacturing & Automation: Man - Machine - Nature" / Katalinic, Branko (ur.).
Beč: DAAAM International Vienna, 2000. str. 047-048 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
34.Car, Miroslav; Majetić, Dubravko; Brezak, DankoLearning Phenomena in Manufacturing and Artificial Neural Network // 6th International Scientific Conference on Production Engineering "Computer Integrated Manufacturing and High Speed Machining" (CIM 2000) / Cebalo, Roko ; Schulz, Herbert (ur.).
Zagreb: Hrvatska udruga proizvodnog strojarstva (HUPS), 2000. str. IV-057 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
35.Paar, Vladimir; Pavin, Nenad; Paar, Nils; Novaković, BrankoNonlinear dynamics of a single-degree robot model part 2 : onset of chaotic transients // Robotica, 18 (2000), 2; 201-208 (međunarodna recenzija, članak, znanstveni)
-
36.Novaković, Branko; Ščap, Dragutin; Novaković, DarioAn analytic approach to fuzzy robot control synthesis // Engineering Applications of Artificial Intelligence, 13 (2000), 71 - 83 (međunarodna recenzija, članak, znanstveni)
-
37.Deur, Joško; Perić, NedjeljkoPointing and tracking position control system for electrical drives with elastic transmission // Proceedings of the 9th International Conference and Exhibition on Power Electronics and Motion Control - EPE PEMC / Fedak, Viliam ; Fetyko, Jan ; Dudrik, Jaroslav ; Fedor, Jozef (ur.).
Košice: Slovak Electrotechnical Society, 2000. str. Vol. 7, pp. 1-6 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
38.Pavković, Danijel; Perić, Nedjeljko; Deur, JoškoSpeed Control of Electrical Drives with Elastic Transmission Utilizing State Estimators and Controllers // Proceedings of 11th International Conference on Electrical Drives and Power Electronics / Ban, Drago ; Jakopović, Željko (ur.).
Zagreb: Hrvatsko društvo za komunikacije, računarstvo, elektroniku, mjerenja I automatiku (KoREMA), 2000. str. 109-114 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
39.Pavković, Danijel; Božić, Ante; Barić, Miroslav; Petrović, Ivan; Perić, Nedjeljko; Deur, JoškoLaboratory Model of a Two-axis Positioning and Tracking Servosystem Carried Out by Utilization of an A.P.C. Turret // Proceedings of 11th International Conference on Electrical Drives and Power Electronics / Ban, Drago ; Jakopović, Željko (ur.).
Zagreb: Hrvatsko društvo za komunikacije, računarstvo, elektroniku, mjerenja I automatiku (KoREMA), 2000. str. 103-108 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
40.Rastović, DaniloThe kinetic description of Carnot process for plasma fusion // Development and practice of artificial intelligence techniques / Bajić, V.B. ; Daohang Sha (ur.).
Durban: IAAMSAD, 1999. str. 283-284 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
41.Rastović, DaniloElastic fuzzy logic controllers in the space L(I) // Development and practice of artificial intelligence techniques / Bajic, V.B. ; Sha, D. (ur.).
Durban: IAAMSAD, 1999. str. 267-268 (poster, međunarodna recenzija, cjeloviti rad (in extenso), stručni) -
42.Rastović, DaniloControlled fusion and vector-valued infinite fuzzy logic controllers // Advances in modelling and analysis. A, 36 (1999), 1-2; 15-20 (podatak o recenziji nije dostupan, članak, znanstveni)
-
43.Rastović, DaniloFuzzy simulation of spatiotemporal behavior // Stability and control: theory and applications, 2 (1999), 1-2; 53-58 (podatak o recenziji nije dostupan, članak, znanstveni)
-
44.Novaković, Branko; Ščap, Dragutin; Novaković, DarioAn Adaptive Fuzzy Logic Control Synthesis and Applications in Robotics // SMC'99 - 1999 IEEE International Conference on Systems, Man, and Cybernetics, CD-ROM / Tanie, Kazuo (ur.).
Piscataway, Tokyo: IEEE, USA, 1999. str. 149 - 155 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
45.Novaković, Dario; Vranješ, Božo; Novaković, BrankoModern Trends in Integration and Automatization of Production Systems - An Overview // CIM'99 - Computer Integrated Manufacturing and High Speed Machining / Cebalo, R. ; Schulz, H. (ur.).
Zagreb: Croatian Association of Production Engineering, 1999. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
46.Novaković, Branko; Vranješ, Božo; Novaković, DarioArtificial Intelligence Components in Modeling and Control of Manufacturing Systems // Proceedings of the 10th International DAAAM Symposium Intelligent Manufacturing and Automation : Past-Present-Future / Katalinić, Branko (ur.).
Beč: DAAAM International Vienna, 1999. str. 13-14 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
47.Ščap, Dragutin; Novaković, Branko; Stegić, MiljenkoThe Straight Numerical Solution of Hertz's Contact Formulae // Proceedings of the 10th International DAAAM Symposium / Katalinić, Branko (ur.).
Beč: DAAAM International Vienna, 1999. str. 487-488 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
48.Filetin, Tomislav; Majetić, Dubravko; Žmak, IrenaApplication of Neural Networks in Predicting the Steel Properties // Proceedings of 10th International DAAAM Symposium / Katalinić Branko (ur.).
Beč: DAAAM International Vienna, 1999. str. 155-156 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
49.Majetić, Dubravko; Car, MiroslavDynamic Neural Network in Manufacturing Operator's learning Phenomena // Proceedings of the 10th International DAAAM Symposium Intelligent Manufacturing & Automation : Past-Present-Future / Katalinić, Branko (ur.).
Beč: DAAAM International Vienna, 1999. str. 305-306 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
50.Filetin, Tomislav; Majetić, Dubravko; Žmak, IrenaPredicting the Tempering Curve of Tool Steel Using Neural Networks // 2. International Conference on Industrial Tools : ICIT'99 / Kuzman, Karl ; Balič, Jože (ur.).
Maribor: TECOS, 1999. str. 424-427 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
