Pregled po projektu: 0152016

1.

Kladarić, Ivica; Krumes, Dragomir; Marković, Radojka

The Influence of Multiple-Solution Annealing on Kinetics of Structural Transformation of Maraging Steels // Materials and Manufacturing Processes, 21 (2006), 8; 783-785 (međunarodna recenzija, članak, znanstveni)

2.

Vitez, Ivan; Kladarić, Ivica; Aračić, Stjepan

The principles of treatment of railways rails defects // Annals of DAAAM for 2006 & Proceedings of the 17th International DAAAM Symposium "Intelligent manufacturing & automation: Focus on mechatronics and robotics / Branko, Katalinić (ur.).
Beč, 2006. str. 433-444 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

3.

Marušić, Vlatko; Krumes, Dragomir; Dzepina, I.

Properties of fiber reinforced polyester laminates // Annals of DAAAM for 2006 & Proceedings of the 17th International DAAAM Symposium "Intelligent manufacturing & automation: Focus on mechatronics and robotics / Katalinić, Branka (ur.).
Beč: DAAAM International, Vienna, Austria, 2006. str. 239-240 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

4.

Samardžić, Ivan; Klarić, Štefanija; Pecić, Vladimir

Utjecaj promjena parametara na stabilnost elektrolučnog zavarivanja svornjaka // Zavarivanje, 49 (2006), 3/4; 71-80 (podatak o recenziji nije dostupan, prethodno priopćenje, znanstveni)

5.

Vitez, Ivan

Ispitivanje mehaničkih svojstava metalnih materijala / - (ur.).
Slavonski Brod: Strojarski fakultet u Slavonskom Brodu, Trg I.B. Mažuranić 2, Sveučilište J.J. Strossmayera u Osijeku, 2006

6.

Kladarić, Ivica; Penava, Andrijana; Aračić, Stjepan

Effects of thermochemical treatments on abrasive resistance of maraging steel // 10th International Research/Expert Conference Trends in the Development of Machinery and Associated Technology TMT 2006: Proceedings / Ekinović, S. ; Calvet, V. J. ; Yalcin, S. (ur.).
Zenica: Graforad, 2006. str. 1231-1233 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

7.

Kladarić, Ivica; Krumes, Dragomir; Marković, Radojka

Comparative analysis of tribologic properties of maraging steels and cold work tool steels // Materials-Energy-Design / Kennedy David (ur.).
Dublin: Dublin Institute of Technology, 2006. str. 81-86 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

8.

Ljubek, Tomislav

Utjecaj poboljšavanja na mehanička i tribološka svojstva nodularnog lijeva NL420, 2006., diplomski rad, Strojarski fakultet, Slavonski Brod

9.

Krumes, Dragomir; Vitez, Ivan; Marković, Radojka

Duplex procedures of heat treatment of steels // 10th International research/expert conference "Trends in the development of machinery and associated technology", TMT 2006 Proceedings / Ekinović, Sabahudin ; Vivancos Calvet, Joan ; Yalcin, Senay ; (ur.).
Lloret de Mar: Faculty of Mechanical Engineering in Zenica, Fakultetska 1, Zenica, BiH ; Escola Tecnica Superior D'Enginyeria Industrial de Barcelona, Department d' Enginyeria Mechanica, Universitat Politecnica de Catalunya, Spain, Bahcesehit University Istanbul, Muhendislik Fakultesi, Turkey, 2006. str. 1227-1230 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

10.

Vitez, Ivan; Kladarić, Ivica; Pecić, Vladimir; Hozjan, Tomislav

POVRŠINSKA OŠTEĆENJA GLAVE ŽELJEZNIČKIH TRAČNICA U EKSPLOATACIJI // International Conference MATRIB 2006 Abstracts book / Grilec, Krešimir (ur.).
Vela Luka: Hrvatsko društvo za materijale i tribologiju, Zagreb, 2006. str. 250-255 (poster, domaća recenzija, cjeloviti rad (in extenso), znanstveni)

11.

Stubičar, Mirko; Bermanec, Vladimir; Stubičar, Nada; Popović, Darko; Marković, Radojka; Krumes, Dragomir

Structural Changes in GaAs Crystalline Compound Caused by Combined Ball Milling and Heat Treatment // Conference Proccedings. 2^nd Croatian Congress on Microscopy with International Participation / Gajović, Srečko (ur.).
Topusko: Society for Electron Microscopy, 2006. str. 250-252 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

12.

Vitez, Ivan; Novoselović, Daniel

Prilog kontroli kvalitete nodularnog lijeva // Ljevarstvo, 48 (2006), 1; 9-13 (podatak o recenziji nije dostupan, članak, znanstveni)

13.

Marušić, Vlatko; Kljajin, Milan; Penava, Andrijana

Possibility of tribological loss reduction by applying welded layers to the working parts of worm-presses in oil mills // Tehnički vjesnik/Technical Gazette, 12 (2005), 3/4; 11-16 (podatak o recenziji nije dostupan, prethodno priopćenje, znanstveni)

14.

Blažević, Marko; Samardžić, Ivan; Kolumbić, Zvonimir

Leakage reduction in potable water distribution network of Slavonski Brod // Tehnički vijesnik, 12 (2005), 3-4; 37-46 (podatak o recenziji nije dostupan, članak, stručni)

15.

Madunić, Božo

Nanošenje tankih prevlaka na površinu čelika, 2005., diplomski rad, Strojarski fakultet, Slavonski Brod

16.

Čanak, Dejan

Utjecaj duplex postupka toplinske obrade na svojstva čelika, 2005., diplomski rad, Strojarski fakultet, Slavonski Brod

17.

Vitez, Ivan; Budić, Ivan

The properties of steels for railway rails // DAAAM International Scientific Book 2005 / Katalinić, Branko (ur.).
Beč: DAAAM International Vienna, 2005. str. 657-676

18.

Vitez, Ivan; Krumes, Dragomir; Marušić, Vlatko

Važnost lomne žilavosti za kvalitetu željezničkih tračnica // 4th Research/Expert Conference with International Participation, Quality 2005, Proceedings / Brdarević, Safet (ur.).
Fojnica: Faculty of Mechanical Engineering in Zenica, Fakultetska 1, Zenica, BiH, 2005. str. 413-420 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

19.

Indof, Janez; Marušić, Vlatko

Interdependence of properties of polyester laminates on kind and kontent of reinforcement // Proceedings of the 4th DAAM international conference / Kalinić, Branko ; Kljajin, Milan ; Budić, Ivan (ur.).
Osijek: J.J.Strosmayer University, Osijek, Mechanical Engineering Faculty, Sl.Brod, Daam International, Vienna, 2005. str. 261-363 (predavanje, cjeloviti rad (in extenso), ostalo)

20.

Marušić, Vlatko; Krumes, Dragomir; Aračić, Stjepan

Material resistance to tribocorrosion during extraction of sugar from sugar beet // Annals of DAAAM for 2005 & Proceedings of the 16th International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Young Researches and Scientists" / Branko, Katalinić (ur.).
Opatija: DAAAM International, Vienna, Austria, 2005. str. 243-244 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)

21.

Vitez, Ivan; Budić, Ivan; Vitez, Boris

Standards for railway rails // Annals of DAAAM for 2005 & Proceedings of the 16th International DAAAM Symposium "Intelligent Manufacturing & Automation: Focus on Young Researches and Scientists" / Branko, Katalinić (ur.).
Opatija: DAAAM International, Vienna, Austria, 2005. str. 369-370 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), pregledni)

22.

Indof, Janez; Marušić, Vlatko

Interdependence of properties of polyester laminates on kind and content of reinforcement // Proceedings of the 4th DAAAM International Conference on Advanced Technologies for Developing Countries / Kljajin, Milan ; Katalinić, Branko ; Budić, Ivan (ur.).
Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod ; DAAAM International, Vienna, 2005. str. 261-263 (poster, međunarodna recenzija, cjeloviti rad (in extenso), pregledni)

23.

Bašić, Ivan; Bašić, Aleksandar; Marušić, Vlatko

Analysis of tribosystem of the demining machine flail RM-KA-02 // Proceedings of the 4th DAAAM International Conference on Advanced Technologies for Developing Countries / Kljajin, Milan ; Katalinić, Branko ; Budić, Ivan (ur.).
Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod ; DAAAM International, Vienna, 2005. str. 191-195 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), stručni)

24.

Marušić, Vlatko

Ispitivanje utjecaja udjela fosfora na otpornost trošenju kočnih papuča željezničkih vozila // Ljevarstvo : glasilo Hrvatskog udruženja za ljevarstvo, 47 (2005), 2; 31-36 (podatak o recenziji nije dostupan, članak, znanstveni)

25.

Aračić, Stjepan; Krumes, Dragomir; Marušić, Vlatko

Wear of boronising layer in aggressive media // 16th International Corrosion Congress, Corrosion and Protection in High Technology Era, / - (ur.).
Peking: Chinese Society for Corrosion and Protection, University of Science and Technology Beijing, Institute of Metal Research Chinese Academy of Sciences, 2005. str. abstract 383, cjeloviti rad na CD-u (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)