Pregled po projektu: 0069021
Pronađeno 110 radova
-
1.Jurković, Zoran; Jurković, Milan; Brezočnik, Miran; Buljan, StipoExtrusion Parameters Determination Based on Different Optimization Approaches // Journal for Technology of Plasticity, 31 (2006), 1-2; 79-89 (podatak o recenziji nije dostupan, članak, znanstveni)
-
2.Jurković, Milan; Mahmić, Mehmed; Karabegović, EdinaMethods and Techniques of Rapid Product Development // Proceedings of 11th International Conference
Kaunas: Kaunas University of Technology, 2006. str. 129-132 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
3.Jurković, Milan; Karabegović, Edina; Dukić, HimzoFriction Influence on the Stress State at the Hydroforming of Tubes // Proceedings of 11th International Conference
Kaunas: Kaunas University of Technology, 2006. str. 124-128 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
4.Jurković, Zoran; Jurković, Milan; Buljan, StipoOptimization of Extrusion Force Prediction Model Using Different Techniques // Programme and Abstract of the Fourteenth International Scientific Conference AMME-2006 / L.A.Dobrzanski (ur.).
Gliwice : Wisla, 2006. (predavanje, međunarodna recenzija, sažetak, ostalo) -
5.Jurković, Milan; Muslić, Merima; Muslić, DamirModelling and Simulation of the Cold Direct Extrusion Force // Programme and Abstract of the Fourteenth International Scientific Conference AMME-2006 / L.A.Dobrzanski (ur.).
Gliwice : Wisla, 2006. (poster, međunarodna recenzija, sažetak, ostalo) -
6.Jurković, Milan; Jurković, Zoran; Buljan, StipoThe Tribological State Test in Metal Forming Processes Using Experiment and Modelling // Programme and Abstract of the Fourteenth International Scientific Conference AMME-2006 / L.A.Dobrzanski (ur.).
Gliwice : Wisla, 2006. (predavanje, međunarodna recenzija, sažetak, znanstveni) -
7.Brezočnik, Miran; Jurković, Milan; Mahmić, Mehmed; Botolin, Luka; Vaupotic, BoštjanDevelopment of a New Product by Reverse Engineering and Rapid Prototyping // Trends in the Development of Machinery and Associated Technology-TMT 2006
Barcelona : Zenica, 2006. str. 1391-1394 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
8.Jurković, Milan; Karabegović, Edina; Jurković, ZoranFormability Limit of Materials in the Hydroforming Processes // Trends in the Development of Machinery and Associated Technology-TMT 2006
Barcelona : Zenica, 2006. str. 117-120 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
9.Buljan, Stipo; Dukić, Himzo; Jurković, ZoranImpact Wave Pressure Modeling in the Explosion Based Deep-Drawing Process // Trends in the Development of Machinery and Associated Technology-TMT 2006
Barcelona : Zenica, 2006. str. 117-180 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
10.Buljan, Stipo; Jurković, Milan; Jurković, ZoranCalculation of Dynamicity Coefficient in Explosive-Induced Deep Drawing // Advanced Technologies for Developing Countries – ; ; ; ATDC 2006 / Mikac Tonči ; Katalinić, Branko (ur.).
Rijeka: Tehnički fakultet & DAAAM, 2006. str. 165-170 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), ostalo) -
11.Buljan, Stipo; Jurković, Milan; Jurković, ZoranMarket Challenges // Proceedings 9th International Scientific Conference - MMA 2006 – ; ; Fleksible technologies
Novi Sad, 2006. str. 87-88 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), stručni) -
12.Jurković, Milan; Jurković, Zoran; Buljan, StipoThe Tribological State Test in Metal Forming Processes Using Experiment and Modelling // Journal of Achievements in Materials and Manufacturing Engineering, 18 (2006), 1-2; 383-386 (podatak o recenziji nije dostupan, članak, znanstveni)
-
13.Jurković, Zoran; Jurković, Milan; Buljan, StipoOptimization of Extrusion Force Prediction Model Using Different Techniques // Journal of Achievements in Materials and Manufacturing Engineering, 17 (2006), 1-2; 353-356 (podatak o recenziji nije dostupan, članak, znanstveni)
-
14.Jurković, Milan; Jurković, Zoran; Mahmić, MehmedAn Analysis and Modelling of Spinning Process without Wall-Thickness Reduction // Metalurgija/Metallurgy, 45 (2006), 4; 307-312 (međunarodna recenzija, članak, znanstveni)
-
15.Development and Modernization of Production / Karabegovic, Isak ; Jurković, Milan ; Dolecek, Vlatko (ur.). Bihać: International Biographical Centre Cambridge ; Society for robotics of Bosnia and Herzegovina. Bihać, 2005 (zbornik)
-
16.Jurković, Milan; Mahmić, Mehmed; Jurković, ZoranEvolution and Application of Rapid Prototyping Technologies // Journal for Technology of Plasticity, 30 (2005), 1-2; 95-108 (podatak o recenziji nije dostupan, članak, znanstveni)
-
17.Barišić, BranimirAnaliza pojave Lüdersovih traka u procesu izrada proizvoda iz tankostjenog lima, 2005., doktorska disertacija, Tehnički fakultet Rijeka, Rijeka
-
18.Development and Modernization of Production / Karabegović, Isak ; Jurković, Milan ; Doleček, Vlatko (ur.).
Bihać: Društvo za robotiku Bosne i Herzegovine ; International Biographical Centre Cambridge, 2005. (poster, sažetak, ostalo) -
19.Jurković, Milan; Jurković, Zoran; Buljan, StipoThe Forces and Stresses Analysis in the Flow Forming Process // Modern Technologies in Manufacturing / Gyenge, Csaba (ur.).
Cluj - Napoca, 2005. str. 245-248 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
20.Jurković, Zoran; Buljan, StipoSome Trends in the Development of Machine Tools // Modern Technologies in Manufacturing / Gyenge, Csaba (ur.).
Cluj - Napoca, 2005. str. 249-252 (poster, međunarodna recenzija, cjeloviti rad (in extenso), ostalo) -
21.Karabegović, Isak; Jurković, Milan; Doleček, VlatkoPrimjena industrijskih robota u Europi i svijetu // Conference on Production Engineering
Crna Gora; Vrnjačka Banja, Srbija, 2005. str. 29-46 (pozvano predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
22.Jurković, Milan; Jurković, Zoran; Cukor, GoranGenetic Algorithm Application in Optimization of Extrusion Forming Process // Computer Integrated Manufacturing and High Speed Machining
Korčula, Hrvatska; Lumbarda, Hrvatska, 2005. str. IV53-IV62 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
23.Jurković, Milan; Karabegović, Isak; Mahmić, MehmedReengineering of Production-the Basic Concept of the Development of Enterprise // Research and Development in Mechanical Industry
Crna Gora; Vrnjačka Banja, Srbija, 2005. str. 15-20 (pozvano predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
24.Jurković, Milan; Karabegović, Edina; Žapčević, SeidSheet metal Hardening at the Hydraulic Stretching // Trends in the Development of Machinery and Associated Technology
Antalya, Turska, 2005. str. 133-136 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
25.Žapčević, Seid; Jurković, Milan; Mahmić, MehmedKnowledge Based Expert Systems in Process Planning // Trends in the Development of Machinery and Associated Technology
Antalya, Turska, 2005. str. 503-506 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
