Pregled po projektu: 0023023
Pronađeno 55 radova
-
1.Alujević, Neven; Gardonio, PaoloDecentralised feedback control systems in double panels // Proceedings of the International Conference on Noise and Vibration Engineering (ISMA2006) / Sas, Paul ; De Munck, Maarten (ur.).
Leuven: Katholieke Universiteit Leuven, 2006. str. 1379-1394 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
2.Alujević, Neven; Gardonio, PaoloPerformance and stability properties of a smart double panel with decentralised active dampers // Proceedings of Sixth International Symposium on Active Control of Sound and Vibration (Active 2006) ; Art. No. 59 / Kidner, M. R. F. ; Howard, C. Q. ; Robertson, W. (ur.).
Adelaide: Australia Acoustical Society South Australia Division, 2006. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
3.Domazet, Z., Luksa, F., Susnjar, M.Fatigue failures analysis of the rolls with grooves in steelworks "Split" // ICEFA-II Second International Conference on Engineering Failure Analysis 2006 / Jones David (ur.).
Toronto, Kanada: Elsevier, 2006. (predavanje, međunarodna recenzija, sažetak, znanstveni) -
4.Krstulović-Opara, Lovre; Perasović, IvanA COMPARISON OF MEASURED DATA, CODE AND FLUID-STRUCTURE INTERACTION SIMULATION OF THE WIND FLOW AROUND SOLAR PANELS // Extended abstracts of the 5th International Congress of Croatian Society of Mechanics / Matejiček, Franjo (ur.).
Zagreb: Hrvatsko društvo za Mehaniku, 2006. str. 133-134 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
5.Vesenjak, Matej; Krstulović-Opara, Lovre; Öchsner, Andreas; Ren, Zoran; Domazet, ŽeljkoExperimantal and Numerical Modelling of Open-cell Cellular Structures // Extended abstracts and Proceedings of the 5th International Congress of Croatian Society of Mechanics (CD) / Matejiček, Franjo (ur.).
Zagreb: Hrvatsko društvo za mehaniku (HDM), 2006. str. 33-34 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
6.Krstulović-Opara, Lovre; Domazet, Željko; Alujević, NevenDie Anwendung von elektrischen Dehnungsmessstreifen zur Beanspruchungsanalyse an der Ölwanne eines 13530 kW-Schiffsdieselmotors // Messtechnische Briefe, 1 (2006), 20-26 (podatak o recenziji nije dostupan, članak, stručni)
-
7.Paolo Gardonio; Alujević, NevenSmart Double Panel with Active Damping Units Located in the Air Cavity // Proceedings of the Institute of Acoustics Spring Conference 2006 / Leighton, Tim ; Attenborough, Keith ; Carey, Anne ; Dunbavin, Philip ; Moorhouse, Andy ; Shield, Bridget (ur.).
Southampton: The Institute of Acoustics Limited, 2006. str. 126-137 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
8.Krstulović-Opara, Lovre; Wriggers, PeterThe quadrilateral parametric contact element based on the moving friction cone formulation // Lecture notes in applied and computational mechanics, 27 (2006), 95-102 (podatak o recenziji nije dostupan, članak, znanstveni)
-
9.Perasović, IvanProračun nosača fotonaponskih panela na krovu FESB-a, 2006., diplomski rad, Fakultet elektrotehnike strojarstva i brodogradnje, Split
-
10.Piršić, TončiKotrljajući ležaji
Split: Fakultet elektrotehnike, strojarstva i brodogradnje Sveučilišta u Splitu, 2005 -
11.Piršić, TončiTransport u industriji / Zulim, Ivan (ur.).
Split: Fakultet elektrotehnike, strojarstva i brodogradnje Sveučilišta u Splitu, 2005 -
12.Lukša, FranciskoIstraživanje uzroka loma kalibriranih valjaka, 2005., magistarski rad, Fakultet elektrotehnike, strojarstva i brodogradnje, Split, Split
-
13.Matić, Tomislav; Domazet, ŽeljkoStructural stress S-N curves for welded aluminium components: fatigue test data for aluminium plate thicknesses up to 4 mm // IAT´05 Proceedings / Fajdiga, Matija (ur.).
Ljubljana: Fakulteta za strojništvo, Ljubljana, 2005. str. 623 - 630 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), ostalo) -
14.Domazet, Željko; Lukša FranciskoExperimental Determonation of the Rolling Force on the Rolls with Grooves // 22nd Danubia-Adria Symposium on Experimental Methods in Solid Mechanics / Luca Collini (ur.).
Parma: University of Parma, 2005. str. 240-241 (poster, međunarodna recenzija, sažetak, stručni) -
15.Krstulović-Opara, Lovre; Domazet, Željko; Alujević, NevenA note on the comparison of measurements for the 13530 kw diesel engine obtained on the test bed and during the navigation // Proceeding of 22nd Danubia-Adria Symposium on Experimental Methods in Solid Mechanics / ?? (ur.).
Parma: ??, 2005. str. 232-233 (poster, međunarodna recenzija, sažetak, znanstveni) -
16.Krstulović-Opara, Lovre; Wriggers, PeterA three-dimensional contact element based on the Moving Friction Cone approach and the elliptical Coulomb law // Proceedings of the Computational Plasticity VIII, Fundaments and Applications / D.R.J. Owen, E. Onate and B. Suarez (ur.).
Barcelona: CIMNE, 2005. str. 827-830 (pozvano predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
17.Matić, Tomislav; Domazet, ŽeljkoDetermination of structural stress for fatigue analysis of welded aluminium components subjected to bending // Fatigue & fracture of engineering materials & structures, 28 (2005), 9; 835-844 (međunarodna recenzija, članak, znanstveni)
-
18.Domazet, Željko; Krstulović-Opara, Lovre; Stupalo, MladenFatigue cracks and failures in cement industry, shipbuilding and power plant facilities // Engineering failure analysis, 12 (2005), 5; 819-833 (međunarodna recenzija, članak, znanstveni)
-
19.Magazinović, GojkoTwo-point mid-range approximation enhanced recursive quadratic programming method // Structural and multidisciplinary optimization, 29 (2005), 5; 398-405 (međunarodna recenzija, članak, znanstveni)
-
20.Domazet, Željko; Matić, TomislavMaterial strength influence on fatigue properties of welded aluminium alloys // 21st Danubia-Adria Symposium on Experimental Methods in Solid Mechanics / Jecić, Stjepan ; Semenski, Damir (ur.).
Zagreb: Studio HRG, 2004. str. 242-243 (poster, međunarodna recenzija, sažetak, znanstveni) -
21.Domazet, Željko; Matić, TomislavDetermination of notch stress for fatigue assessment of welded aluminium joints with longitudinal and round stiffener subjected to bending // Advances in Experimental Mechanics / Pappalettere, Carmine (ur.).
Bari: McGraw Hill, 2004. str. 227-228 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
22.Magazinović, GojkoCijevni blokovi za grijanje tekućih tereta // XVI Simpozij teorija i praksa brodogradnje / Žiha, Kalman (ur.).
Zagreb: Fakultet strojarstva i brodogradnje Sveučilišta u Zagrebu, 2004. str. 711-716 (predavanje, domaća recenzija, cjeloviti rad (in extenso), znanstveni) -
23.Domazet, Željko; Krstulović-Opara, Lovre; Stupalo, MladenFatigue cracks and failures in cement industry, shipbuilding and power plant facilities // First International Conference on Engineering Failure Analysis 2004 / Branco, C.M. (ur.).
Lisabon: Elsevier, 2004. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
24.Domazet, Željko; Matić, Tomislav; Krstulović, AnteProcjena vijeka trajanja zavarenih aluminijskih komponenti s uzdužnim i okruglim ojačanjem opterećenih na savijanje // Zavarivanje u pomorstvu Welding in Maritime Engineering / Kožuh, Zoran (ur.).
Zagreb: Croatian Welding Society, 2004. str. 487-494 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
25.Domazet, Željko; Matić, Tomislav; Krstulović, AnteFatigue Analysis of Welded Aluminium Joints with Longitudinal and Round Stiffener Subjected to Bending Loads by Nominal, Structural and Notch Stress Range Approaches // Proceedings of the 8th International Design Conference (DESIGN 2004, ) / Marjanović, Dorjan (ur.).
Zagreb: FAMENA-Zagreb, The Design Society-Glasgow, 2004. str. 1227-1232 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
