Pregled po CROSBI profilu: Ivana Dumanić (CROSBI Profil: 34476, MBZ: 365384)
Pronađeno 20 radova
-
1.Dumanić, Ivana; Jozić, Sonja; Bagavac, Petra; Bajić, DraženOrthogonal cutting simulation of EN AW 6082 T6 alloy using a coupled Eulerian-Lagrangian approach // Heliyon, online first (2023), 1-21 doi:10.1016/j.heliyon.2023.e14821 (međunarodna recenzija, članak, znanstveni)
-
2.Igor Ćulum; Ivana Dumanić; Sonja Jozić; Dražen Bajić; Branimir LelaInfluence of cutting parameters on cutting forces and surface roughness in milling of aluminum foam // Mechanical Technologies and Structural Materials, MTSM2022
Split, Hrvatska, 2022. str. 21-28 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
3.Jozić, Sonja; Bajić, Dražen; Dumanić, Ivana; Ljuba, BrigitaSelection of optimal die casting process parameters based on simulation and genetic algorithms // Mechanical Technologies and Structural Materials, MTSM2022 / Jozić, Sonja ; Lela, Branimir ; Gjeldum, Nikola (ur.).
Split: Hrvatsko društvo za strojarske tehnologije, Hrvatska, 2022. str. 65-70 (poster, međunarodna recenzija, cjeloviti rad (in extenso), stručni) -
4.Lela, Branimir; Jozić, Sonja; Krolo, Jure; Dumanić, Ivana; Grgić, KarlaProduction of Open Cell Foams Out of Aluminium Chips // Athens journal of technology & engineering, 8 (2021), 4; 299-310 doi:10.30958/ajte.8-4-2 (međunarodna recenzija, članak, znanstveni)
-
5.Jozić, Sonja; Bajić, Dražen; Dumanić, Ivana; Bagavac, ŽeljkoOptimization for an efficient and highly productive turning process // Reports in Mechanical Engineering, 2 (2021), 1; 212-221 doi:10.31181/rme2001021212j (međunarodna recenzija, članak, znanstveni)
-
6.Lela, Branimir; Krolo, Jure; Grgić, Karla; Jozić, Sonja; Dumanić, IvanaProduction of closed cell foams from the aluminium chip waste // Proceedings of International conference “Mechanical Technologies and Structural Materials”
Split, 2021. str. 95-100 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
7.Ivana Dumanić, Sonja Jozić, Deni Dumanić, Luka NimacDesign and Improvement of High Pressure Die Casting Process based on NovaFlow&Solid Software // International conference “Mechanical Technologies and Structural Materials” Split, MTSM 2021
Split, Hrvatska, 2021. str. 29-35 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
8.Lela, Branimir; Jozić, Sonja; Krolo, Jure; Dumanić, Ivana; Grgić, KarlaProduction of Open-Cell Foams out of Aluminium Chips // Proceedings of 8th Annual International Conference on Technology & Engineering / Papanikos, Gregory T. (ur.).
Atena, 2021. 7, 13 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
9.Dumanić Ivana, Jozić Sonja, Bajić DraženSIMULATION OF REAL IMAGE MICROSTRUCTURAL MODEL OF SEMI-SOLID ALUMINIUM ALLOY USING A COUPLED EULERIAN–LAGRANGIAN APPROACH // International Journal of Metalcasting, online first (2021), 1-11 (međunarodna recenzija, članak, znanstveni)
-
10.Krolo, Jure; Dumanić, Ivana; Jozić, Sonja; Lela, BranimirInfluence of semi-solid metal processing and artificial aging on microstructure and hardness of the AlSi9Cu3(Fe) // Proceeding book of the 19th International Foundryman Conference entitled: Humans - Valuable Resource for Foundry Industry Development / Dolić, Natalija ; Zovko Brodarac, Zdenka ; Brajčinović, Sandra (ur.).
Sisak: Faculty of Metallurgy, 2021. str. 186-193 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
11.Dumanić, Ivana; Jozić, Sonja; Bajić, Dražen; Krolo, JureOptimization of Semi-solid High- Pressure Die Casting Process by Computer Simulation, Taguchi Method and Grey Relational Analysis // International Journal of Metalcasting, 15 (2021), 1; 108-118 doi:10.1007/s40962-020-00422-5 (međunarodna recenzija, članak, znanstveni)
-
12.Dumanić, Ivana; Krolo, Jure; Lela, Branimir; Jozić, SonjaThermomechanical treatment of A380 aluminum alloy for globular thixo feedstock // Materialwissenschaft und Werkstofftechnik, 51 (2020), 1047-1057 doi:10.1002/mawe.202000076 (međunarodna recenzija, članak, znanstveni)
-
13.Jozić, Sonja; Dumanić, Ivana; Bajić, DraženExperimental analysis and optimization of the controllable parameters in turning of en aw-2011 alloy; dry machining and alternative cooling techniques // Facta Universitatis. Series: mechanical engineering, 17 (2020), 1; 13-29 doi:10.22190/FUME191024009J (međunarodna recenzija, članak, znanstveni)
-
14.Jozić, Sonja; Bajić, Dražen; Dumanić, IvanaInfluence of Processing Parameters on the Performances of High Pressure Die Casting Process // International Journal of Engineering Research and Development, 15 (2019), 4; 52-58 (međunarodna recenzija, članak, znanstveni)
-
15.Krolo, Jure; Dumanić, Ivana; Jozić, Sonja; Lela, BranimirMicrostructure of the extruded aluminium AlSi9Cu3(Fe) machining chips reheated in the semisolid state // "Mechanical Technologies and Structural Materials 2019” Conference Proceedings / Jozić, Sonja ; Lela, Branimir (ur.).
Split: Hrvatsko društvo za strojarske tehnologije, 2019. str. 109-114 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
16.Dumanić, Ivana; Krolo, Jure; Jozić, Sonja; Lela, Branimir; Bajić, Dražen; Ljumović, PetarINFLUENCE OF THE PROCESSING ROUTE ON THE MICROSTRUCTURE FORMATION AT SEMI-SOLID TEMPERATURES FOR ALUMINUM ALLOY A380 // CONFERENCE PROCEEDINGS of the 20th International Conference on Materials / Šolić, Sanja ; Schauperl, Zdravko ; Pugar, Daniel (ur.).
Zagreb: Hrvatsko društvo za materijale i tribologiju (HDMT), 2019. str. 137-144 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
17.Krolo, Jure; Lela, Branimir; Dumanić, Ivana; Kozina, FranjoStatistical Analysis of the Combined ECAP and Heat Treatment for Recycling Aluminum Chips Without Remelting // Metals, 9 (2019), 6; 660, 14 doi:10.3390/met9060660 (međunarodna recenzija, članak, znanstveni)
-
18.Dumanić, Ivana; Jozić, Sonja; Bajić, Dražen; Sučić, MihovilExperimental investigation and multi-objective optimization of controllable parameters in turning process using Taguchi Method and Grey Relational Analysis // Mechanical Technologies and Structural Materials MTSM2018
Split, Hrvatska, 2018. str. 13-21 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
19.Jozić, Sonja; Bajić, Dražen; Dumanić, Ivana; Kodžoman, MarkoOptimization of High Pressure Die Casting Process using Taguchi method and Computer Aided Casting Simulation Technique // Mechanical Technologies and Structural Materials MTSM2018 / Jozić, Sonja ; Nikola, Gjeldum (ur.).
Split: Croatian Society for Mechanical Technologies, 2018. str. 77-82 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
20.Cvitanić, Vedrana; Dumanić, Ivana; Kovačić, Maja; Safaei, MohsenAnalytical and numerical simulations of cylindrical cup deep drawing for DC06 sheet sample // CIET 2018 Conference Proceedings / Plazibat, Bože ; Kosanović, Silvana (ur.).
Split: University of Split, University Department of Professional Studies, 2018. str. 527-536 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), stručni)
