Pregled po CROSBI profilu: Mario Sremec (CROSBI Profil: 33878, MBZ: 359014)
Pronađeno 13 radova
-
1.Kozarac, Darko; Sremec, Mario; Vučetić, Ante; Božić, MladenImproving the Low Load Operation of a Dual-Fuel Diesel/Natural Gas Engine by Premixing the Diesel Fuel // Proceedings of 2019 JSAE/SAE Powertrains Fuels and Lubricants International Meeting
Kyoto: SAE, 2019. str. 1-12 doi:.org/10.4271/2019-01-2174 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
2.Kozarac, Darko; Sremec, Mario; Božić, Mladen; Vučetić, AnteThe Performance and Emissions of a Conventional Natural Gas/Diesel Dual Fuel Engine at Various Operating Conditions // SEA Internatuonal
Detroit (MI), Sjedinjene Američke Države, 2019. 2019-01-1158, 14 doi:10.4271/2019-01-1158 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
3.Vučetić, Ante; Božić, Mladen; Sremec, Mario; Kozarac, DarkoOPERATING PARAMETERS OF THE BIOGAS-DIESEL DUAL- FUEL ENGINE // Proceedings of the European Combustion Meeting – 2019 / Pereira, Sandrina ; Costa, Mario (ur.).
Lisabon, 2019. S1_AIII_68, 6 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
4.Božić, Mladen; Vučetić, Ante; Sremec, Mario; Kozarac, DarkoEXPLORATION OF THE HIGH LOAD LIMITS IN DUAL-FUEL COMBUSTION OPERATION // Proceedings of the European Combustion Meeting – 2019 / Pereira, Sandrina ; Costa, Mario (ur.).
Lisabon, 2019. S1_AIII_67, 6 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
5.Kozarac, Darko; Taritaš, I; Sjerić, Momir; Krajnović, Josip; Sremec, MarioThe Optimization of the Dual Fuel Engine Injection Parameters by Using a Newly Developed Quasi-Dimensional Cycle Simulation Combustion Model // SAE Technical Papers
Detroit (MI): SAE International, 2018. 2018-01-0261, 19 doi:10.4271/2018-01-0261 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
6.Sremec, MarioExperimental Investigation of Influence of Dual-Fuel Engine Operating Parameters on Combustion, Efficiency and Exhaust Gas Emissions, 2018., doktorska disertacija, Fakultet strojarstva i brodogradnje, Zagreb
-
7.Sremec, Mario; Božić, Mladen; Vučetić, Ante; Kozarac, DarkoInfluence of High Compression Ratio and Excess Air Ratio on Performance and Emissions of Natural Gas Fuelled SI Engine // Thermal science, 22 (2018), 5; 931681, 13 doi:10.2298/TSCI171222219S (međunarodna recenzija, članak, znanstveni)
-
8.Sremec, Mario; Kozarac, Darko; Božić, Mladen; Vučetić, AnteInfluence of compression ratio on performance and emissions of natural gas fuelled SI engine // Digital Proceedings of 12th Conference on Sustainable Development of Energy, Water and Environment Systems - SDEWES Dubrovnik 2017 / Ban, Marko [et al.] (ur.). - Zagreb : Fakultet Strojarstva i Brodogradnje , 2017. / Ban, Marko [et al.] (ur.).
Zagreb: Fakultet strojarstva i brodogradnje Sveučilišta u Zagrebu, 2017. (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
9.Sremec, Mario; Taritaš, Ivan; Sjerić, Momir; Kozarac, DarkoNumerical Investigation of Injection Timing Influence on Fuel Slip and Influence of Compression Ratio on Knock Occurrence in Conventional Dual Fuel Engine // Journal of sustainable development of energy, water and environment systems, 5 (2017), 4; 518-532 doi:10.13044/j.sdewes.d5.0163 (međunarodna recenzija, članak, znanstveni)
-
10.Taritaš, Ivan; Sremec, Mario; Kozarac, Darko; Blažić, Mislav; Lulić, ZoranThe Effect of Operating Parameters on Dual Fuel Engine Performance and Emissions – An Overview // Transactions of FAMENA, 41 (2017), 1; 1-14 doi:10.21278/TOF.41101 (međunarodna recenzija, članak, znanstveni)
-
11.Sremec, Mario; Taritaš, Ivan; Sjerić, Momir; Kozarac, DarkoNumerical Investigation of Influence of Injection Timing and Knock on Dual Fuel Engine // Digital Proceedings of 2nd South East European Conference on Sustainable Development of Energy, Water and Environment Systems - SEE SDEWES Piran 2016 / Ban, Marko [et al.] (ur.). - Zagreb : Fakultet Strojarstva i Brodogradnje , 2016. / Ban, Marko (ur.).
Zagreb: Fakultet strojarstva i brodogradnje Sveučilišta u Zagrebu, 2016. str. 1-14 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
12.Sremec, MarioAnaliza cjelovitosti stupa vjetroagregata, 2013., diplomski rad, diplomski, Fakultet strojarstva i brodogradnje, Zagreb
-
13.Sremec, MarioAnaliza naprezanja i deformacija nosive rešetkaste konstrukcije, 2012., diplomski rad, preddiplomski, Fakultet strojarstva i brodogradnje, Zagreb
