Pregled po CROSBI profilu: Stanko Škec (CROSBI Profil: 30588, MBZ: 325242)
Pronađeno 137 radova
-
51.Idrissov, Agzam; Škec, Stanko; Maier, Anja M.Understanding system features through information visualisations to improve product development: An exploratory study with data analysts // Proceedings of NordDesign 2020 / Mortensen, N.H. ; Hansen, C.T. ; Deininger, M. (ur.).
online: The Design Society, 2020. str. 1-12 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
52.Miler, Daniel; Hoić, Matija; Škec, Stanko; Žeželj, DraganOptimisation of polymer spur gear pairs with experimental validation // Structural and multidisciplinary optimization, 62 (2020), 3271-3285 doi:10.1007/s00158-020-02686-1 (međunarodna recenzija, članak, znanstveni)
-
53.Horvat, Nikola; Škec, Stanko; Martinec, Tomislav; Lukačević, Fanika; Perišić, Marija MajdaIdentifying the effect of reviewers' expertise on design review using virtual reality and desktop interface // Proceedings of the Design Society: DESIGN Conference
Dubrovnik, Hrvatska: Cambridge University Press, 2020. str. 187-196 doi:10.1017/dsd.2020.304 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
54.Becattini, Niccolo; Škec, Stanko; Pavković, Neven; Cascini, GaetanoE-Learning Infrastructure Prototype for Geographically Distributed Project-Based Learning // Proceedings of the Design Society: DESIGN Conference
Dubrovnik, Hrvatska, 2020. str. 1667-1676 doi:10.1017/dsd.2020.282 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
55.Idrissov, Agzam; Škec, Stanko; Maier, Anja M.Visualising Systems: Mapping System Features and Interactive Information Visualisations in Design // Proceedings of the Design Society: DESIGN Conference
Dubrovnik, Hrvatska, 2020. str. 2295-2304 doi:10.1017/dsd.2020.138 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
56.Lukačević, FanikaCapturing, storing, and using data acquired by smart products to support product development, 2020., diplomski rad, diplomski, Fakultet strojarstva i brodogradnje, Zagreb
-
57.Roginić, MatijaStroj za usitnjavanje granula za fertilizaciju tla, 2020., diplomski rad, preddiplomski, Fakultet strojarstva i brodogradnje, Zagreb
-
58.Koraca, FilipUređaj za ispitivanje stanja cijevi izmjenjivača topline, 2020., diplomski rad, preddiplomski, Fakultet strojarstva i brodogradnje, Zagreb
-
59.Kosec, Petar; Škec, Stanko; Miler, DanielA comparison of the tolerance analysis methods in the open-loop assembly // Advances in production engineering & management, 15 (2020), 1; 44-56 doi:10.14743/apem2020.1.348 (međunarodna recenzija, članak, znanstveni)
-
60.Parraguez, Pedro; Škec, Stanko; e Carmo, Duarte Oliveira; Maier, AnjaQuantifying technological change as a combinatorial process // Technological Forecasting and Social Change, 151 (2020), 119803, 15 doi:10.1016/j.techfore.2019.119803 (međunarodna recenzija, članak, znanstveni)
-
61.Horvat, Nikola; Škec, Stanko; Perišić, Marija Majda; Bojčetić, NenadRelating Problem-Solving Approach to Turn-Taking in Communication of Design Teams // Tehnički vjesnik : znanstveno-stručni časopis tehničkih fakulteta Sveučilišta u Osijeku, 27 (2020), 3; -, 8 doi:10.17559/TV-20180911161642 (međunarodna recenzija, članak, znanstveni)
-
62.Štorga, Mario; Škec, StankoOverview of the UNIZAG FSB courses offered for the CASProD accreditation process, 2019. (izvještaj).
-
63.Grgić, DomagojStroj za namatanje izolacijskih kapa transformatora, 2019., diplomski rad, diplomski, Fakultet strojarstva i brodogradnje, Zagreb
-
64.Delaš, JosipaReliability analysis of in-service inspection device for vacuum vessel outer field weld, 2019., diplomski rad, diplomski, Fakultet strojarstva i brodogradnje, Zagreb
-
65.Josić, HrvojeUvođenje digitalnih tehnologija u razvoj dentalne protetike, 2019., diplomski rad, diplomski, Fakultet strojarstva i brodogradnje, Zagreb
-
66.Kosec, PetarUsporedba metoda za analizu tolerancija, 2019., diplomski rad, diplomski, Fakultet strojarstva i brodogradnje, Zagreb
-
67.Brozić, LukaAnaliza tolerancija korištenjem Monte Carlo pristupa, 2019., diplomski rad, preddiplomski, Fakultet strojarstva i brodogradnje, Zagreb
-
68.Martinec, Tomislav; Škec, Stanko; Šklebar, Jelena; Štorga, MarioApplying Engineering Design Ontology for Content Analysis of Team Conceptual Design Activity // Proceedings of the Design Society: International Conference on Engineering Design / Wartzack, Sandro ; Schleich, Benjamin ; Guerreiro Gonçalves, Milene ; Eisenbart, Boris (ur.).
Delft: Cambridge University Press, 2019. str. 2467-2476 doi:10.1017/dsi.2019.253 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
69.Miler, Daniel; Škec, Stanko; Katana, Branko; Žeželj, DraganAn experimental study of composite plain bearings: Influence of clearance on friction coefficient and temperature // Strojniški vestnik, 65 (2019), 10; 547-556 doi:10.5545/sv-jme.2019.6108 (međunarodna recenzija, članak, znanstveni)
-
70.Cash, Philip; Škec, Stanko; Štorga, MarioThe Dynamics of Design: Exploring Heterogeneity in Meso-scale Team Processes // Design studies, 64 (2019), 124-153 doi:10.1016/j.destud.2019.08.001 (međunarodna recenzija, članak, znanstveni)
-
71.Nikolić, Marija; Škec, Stanko; Martinec, Tomislav; Horvat, NikolaThe Role of Sketching Activities and Outcomes in Conceptual Design Phase // Proceedings of the Design Society: International Conference on Engineering Design / Wartzack, Sandro ; Schleich, Benjamin ; Guerreiro Gonçalves, Milene ; Eisenbart, Boris (ur.).
Delft: Cambridge University Press, 2019. str. 399-408 doi:10.1017/dsi.2019.43 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
72.Horvat, Nikola; Škec, Stanko; Martinec, Tomislav; Lukačević, Fanika; Perišić, Marija MajdaComparing Virtual Reality and Desktop Interface for Reviewing 3D CAD Models // Proceedings of the Design Society: International Conference on Engineering Design / Wartzack, Sandro ; Schleich, Benjamin ; Guerreiro Gonçalves, Milene ; Eisenbart, Boris (ur.).
Delft: Cambridge University Press, 2019. str. 1923-1932 doi:10.1017/dsi.2019.198 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
73.Martinec, Tomislav; Škec, Stanko; Horvat, Nikola; Štorga, MarioA state-transition model of team conceptual design activity // Research in engineering design, 30 (2019), 1; 103-132 doi:10.1007/s00163-018-00305-1 (međunarodna recenzija, članak, znanstveni)
-
74.Škec, Stanko; Štorga, MarioOverview of Existing Studies in the Field of the Smart Products Development, 2018. (izvještaj).
-
75.Šklebar, JelenaAnaliza konteksta komunikacije u konceptualnoj fazi razvoja, 2018., diplomski rad, diplomski, Fakultet strojarstva i brodogradnje, Zagreb
-
76.Nikolić, MarijaUloga skiciranja u konceptualnoj fazi razvoja proizvoda, 2018., diplomski rad, preddiplomski, Fakultet strojarstva i brodogradnje, Zagreb
-
77.Delaš, JosipaPrimjena aksiomatskih principa za evaluaciju proizvoda, 2018., diplomski rad, preddiplomski, Fakultet strojarstva i brodogradnje, Zagreb
-
78.Lukačević, FanikaPrimjena VS sustava za pregled 3D CAD modela, 2018., diplomski rad, preddiplomski, Fakultet strojarstva i brodogradnje, Zagreb
-
79.Delaš, Josipa; Škec, Stanko; Štorga, MarioApplication of Axiomatic Design principles for concept evaluation // Proceedings of 12th International Conference on Axiomatic Design (ICAD2018) / Foley, Joseph T. ; Puik, Erik et al. (ur.).
Reykjavík: MATEC Web of Conferences, 2018. str. 1-10 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
80.Proceedings of the DESIGN 2018 15th International Design Conference (Volume 6 - Sociotechnical Issues in Design, Systems Engineering and Design) / Marjanović, Dorian ; Štorga, Mario ; Škec, Stanko ; Bojčetić, Nenad ; Pavković, Neven (ur.). Zagreb : Glasgow: Fakultet strojarstva i brodogradnje Sveučilišta u Zagrebu ; The Design Society, 2018 (zbornik) doi:10.21278/idc
-
81.Proceedings of the DESIGN 2018 15th International Design Conference (Volume 5 - Human Behaviour and Design, Industrial Design and Design Education) / Marjanović, Dorian ; Štorga, Mario ; Škec, Stanko ; Bojčetić, Nenad ; Pavković, Neven (ur.). Zagreb : Glasgow: Fakultet strojarstva i brodogradnje Sveučilišta u Zagrebu ; The Design Society, 2018 (zbornik) doi:10.21278/idc
-
82.Proceedings of the DESIGN 2018 15th International Design Conference (Volume 4 - Design Information and Knowledge) / Marjanović, Dorian ; Štorga, Mario ; Škec, Stanko ; Bojčetić, Nenad ; Pavković, Neven (ur.). Zagreb : Glasgow: Fakultet strojarstva i brodogradnje Sveučilišta u Zagrebu ; The Design Society, 2018 (zbornik) doi:10.21278/idc
-
83.Proceedings of the DESIGN 2018 15th International Design Conference (Volume 3 - Design Methods) / Marjanović, Dorian ; Štorga, Mario ; Škec, Stanko ; Bojčetić, Nenad ; Pavković, Neven (ur.). Zagreb : Glasgow: Fakultet strojarstva i brodogradnje Sveučilišta u Zagrebu ; The Design Society, 2018 (zbornik) doi:10.21278/idc
-
84.Proceedings of the DESIGN 2018 15th International Design Conference (Volume 2 - Design Organisation and Management) / Marjanović, Dorian ; Štorga, Mario ; Škec, Stanko ; Bojčetić, Nenad ; Pavković, Neven (ur.). Zagreb : Glasgow: Fakultet strojarstva i brodogradnje Sveučilišta u Zagrebu ; The Design Society, 2018 (zbornik) doi:10.21278/idc
-
85.Proceedings of the DESIGN 2018 15th International Design Conference (Volume 1 - Design Theory and Research Methodology) / Marjanović, Dorian ; Štorga, Mario ; Škec, Stanko ; Bojčetić, Nenad ; Pavković, Neven (ur.). Zagreb : Glasgow: Fakultet strojarstva i brodogradnje Sveučilišta u Zagrebu ; The Design Society, 2018 (zbornik) doi:10.21278/idc
-
86.Martinec, Tomislav; Horvat, Nikola; Škec, Stanko; Štorga, MarioVerbal Engagement in Teams Solving a Conceptual Design Task // Proceedings of the 15th International Design Conference (DESIGN 2018) / Marjanović, Dorian ; Štorga, Mario ; Škec, Stanko ; Bojčetić, Nenad ; Pavković, Neven (ur.).
Zagreb, 2018. str. 2075-2086 doi:10.21278/idc.2018.0540 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
87.Tegeltija, Miroslava; Oehmen, Josef; McMahon, Christopher Alan; Maier, Anja; Kozin, Igor; Škec, StankoTailoring risk management in design // DS92: Proceedings of the DESIGN 2018 15th International Design Conference / Marjanović, D. ; Štorga, M. ; Škec, S. ; Bojčetić, N. ; Pavković, N. (ur.).
Zagreb, 2018. str. 667-678 doi:10.21278/idc.2018.0385 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni) -
88.Horvat, NikolaOdređivanje obrazaca komunikacije u razvojnim timovima, 2017., diplomski rad, diplomski, Fakultet strojarstva i brodogradnje, Zagreb
-
89.Martinec, Tomislav; Škec, Stanko; Savšek, Tomaž; Perišić, Marija MajdaWork sampling for the production development: A case study of a supplier in European automotive industry // Advances in production engineering & management, 12 (2017), 4; 375-387 doi:10.14743/apem2017.4.265 (međunarodna recenzija, članak, znanstveni)
-
90.Snider, Chris; Škec, Stanko; Gopsill, James; Hicks, Ben.The characterisation of engineering activity through email communication and content dynamics, for support of engineering project management // Design Science, 3 (2017), 22, 31 doi:10.1017/dsj.2017.16 (međunarodna recenzija, članak, znanstveni)
-
91.Proceedings of the 21st International Conference on Engineering Design (ICED 17), Vol 1: Resource Sensitive Design, Design Research Applications and Case Studies / Maier, Anja ; Škec, Stanko ; Kim, Harrison ; Kokkolaras, Michael ; Oehmen, Josef ; Fadel, Georges ; Salustri, Filippo ; Van der Loos, Mike (ur.). Glasgow: The Design Society, 2017 (zbornik)
-
92.Proceedings of the 21st International Conference on Engineering Design (ICED 17), Vol 2: Design Processes, Design Organisation and Management / Maier, Anja ; Škec, Stanko ; Kim, Harrison ; Kokkolaras, Michael ; Oehmen, Josef ; Fadel, Georges ; Salustri, Filippo ; Van der Loos, Mike (ur.). Glasgow: The Design Society, 2017 (zbornik)
-
93.Proceedings of the 21st International Conference on Engineering Design (ICED 17), Vol 3: Product, Services and Systems Design / Maier, Anja ; Škec, Stanko ; Kim, Harrison ; Kokkolaras, Michael ; Oehmen, Josef ; Fadel, Georges ; Salustri, Filippo ; Van der Loos, Mike (ur.). Glasgow: The Design Society, 2017 (zbornik)
-
94.Proceedings of the 21st International Conference on Engineering Design (ICED 17), Vol 4: Design Methods and Tools / Maier, Anja ; Škec, Stanko ; Kim, Harrison ; Kokkolaras, Michael ; Oehmen, Josef ; Fadel, Georges ; Salustri, Filippo ; Van der Loos, Mike (ur.). Glasgow: The Design Society, 2017 (zbornik)
-
95.Proceedings of the 21st International Conference on Engineering Design (ICED 17), Vol 5: Design for X, Design to X / Maier, Anja ; Škec, Stanko ; Kim, Harrison ; Kokkolaras, Michael ; Oehmen, Josef ; Fadel, Georges ; Salustri, Filippo ; Van der Loos, Mike (ur.). Glasgow: The Design Society, 2017 (zbornik)
-
96.Proceedings of the 21st International Conference on Engineering Design (ICED 17), Vol 6: Design Information and Knowledge / Maier, Anja ; Škec, Stanko ; Kim, Harrison ; Kokkolaras, Michael ; Oehmen, Josef ; Fadel, Georges ; Salustri, Filippo ; Van der Loos, Mike (ur.). Glasgow: The Design Society, 2017 (zbornik)
-
97.Proceedings of the 21st International Conference on Engineering Design (ICED 17), Vol 7: Design Theory and Research Methodology / Maier, Anja ; Škec, Stanko ; Kim, Harrison ; Kokkolaras, Michael ; Oehmen, Josef ; Fadel, Georges ; Salustri, Filippo ; Van der Loos, Mike (ur.). Glasgow: The Design Society, 2017 (zbornik)
-
98.Proceedings of the 21st International Conference on Engineering Design (ICED 17), Vol 8: Human Behaviour in Design / Maier, Anja ; Škec, Stanko ; Kim, Harrison ; Kokkolaras, Michael ; Oehmen, Josef ; Fadel, Georges ; Salustri, Filippo ; Van der Loos, Mike (ur.). Glasgow: The Design Society, 2017 (zbornik)
-
99.Proceedings of the 21st International Conference on Engineering Design (ICED 17), Vol 9: Design Education / Maier, Anja ; Škec, Stanko ; Kim, Harrison ; Kokkolaras, Michael ; Oehmen, Josef ; Fadel, Georges ; Salustri, Filippo ; Van der Loos, Mike (ur.). Glasgow: The Design Society, 2017 (zbornik)
-
100.Martinec, Tomislav; Škec, Stanko; Štorga, MarioExploring the decomposition of team design activity // Proceedings of the 21st International Conference on Engineering Design (ICED 17) Vol 8: Human Behaviour in Design / Maier, Anja ; Škec, Stanko ; Kim, Harrison ; Kokkolaras, Michael ; Oehmen, Josef ; Fadel, Georges ; Salustri, Filippo ; Van der Loos, Mike (ur.).
Vancouver, Kanada: The Design Society, 2017. str. 229-238 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
